Search Results

Search found 41561 results on 1663 pages for 'linux command'.

Page 124/1663 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Routing using Linux with 2 NIC cards

  - by Kevin Parker

  Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

  Read the article

• Installing softare on Linux

  - by Dimen Shaw

  I'm trying to install the GMP package on Redhat 4, x86_64. The package can only be installed using make, which is not available and should be installed with apt-get/yum, but I don't have either one of them. I tried installing them using rpm, but they each require lots of dependencies themselves, which although finite in amount seem like a VERY tedious job to do. Any help on how I should go about solving this?

  Read the article

• Linux - quota per directory?

  - by depesz

  I have following scenarios: Single partition mounted as /, with lots of disk space. There is a range of directories (/pg/tbs1, /pg/tbs2, /pg/tbs3 and so on), and I would like to limit total size of these directories. One option is to make some big files, and then mkfs them, and mount over loopback, and then set quota, but this makes expansion a bit problematic. Is there any other way to make the quota work per directory?

  Read the article

• Backup linux to ftp server

  - by Alakdae

  What do you use for backups to ftp server? I've tried the setup with Amanda and virtual tapes on the ftp server mounted with Curlftpfs and I'm not satisfied with it. I just don't feel confident about Amanda. Also I cannot use anything that uses rsync on the ftp mounted filesystem because it only creates the directories and doesn't create files as it cannot execute "mkstemp". I've been thinking about Bacula but I can't find any good HOWTO for it.

  Read the article

• Linux Read-Ahead Downsides

  - by JPerkSter

  Hi Everyone, Hope all is well. I have a question regarding read-ahead caching. Are there any downsides to raising the size of the read-ahead cache? On our farm, we're currently running at 256, and upon raising that higher, we are seeing significant throughput gains.   [root@server~]# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 7352 MB in 2.00 seconds = 3677.62 MB/sec 3 Timing buffered disk reads: 244 MB in 3.10 seconds = 78.68 MB/sec [root@server ~]# blockdev --setra 10240 /dev/sda [root@server ~]# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 11452 MB in 2.00 seconds = 5728.52 MB/sec Timing buffered disk reads: 422 MB in 3.17 seconds = 133.04 MB/sec We are running on 2.6. Thanks!

  Read the article

• Renicing complex multithreaded applications in Linux

  - by Vi

  Applications (especially big Java and C++ ones) often shows up as multiple lines in htop, each have separate PID and separate nice level. Also application can spawn a lot of child processes (like as in aptitude update), so I need to affect both parent one (to make new children have new priority) and child ones (to bring the effect immediately, not after the child terminates) How can I apply "renice" or "ionice" or "schedtool" to already launched big application?

  Read the article

• Conditional `mount` in Linux: dev or nfs

  - by o_O Tync

  I have a mount point — let it be /media/question — and two possible devices: a physical HDD and a remote NFS folder. Sometimes I plug the device in physically, in other cases I mount it via NFS. Is there a way to specify both of them in fstab so that executing mount /media/question will preferably choose physical volume, and when it's not available — NFS?

  Read the article

• Linux Directory Access Problem: Permission Denied """In Root"""

  - by RBA

  Hi, When login through root on HP-tru Unix server, I am trying to access a directory, it is saying "Permission Denied".. Also, an sh file is also not able to execute through same root access.. I have checked the permission of the directory as well as for sh file through ls-ltr.. It is also fine.. Root System rwx-rwx-rwx-- What could be the possible cause, and how to correct it.. Thanks.

  Read the article

• Ubuntu Linux: Process swap memory and memory usage

  - by David Halter

  My Ubuntu eats more memory than the task manager is showing: sudo ps -e --format rss | awk 'BEGIN{c=0} {c+=$1} END{print c/1024}' 1043.84 free -m total used free shared buffers cached Mem: 3860 1878 1982 0 20 679 -/+ buffers/cache: 1178 2681 Swap: 2729 1035 1693 That's strange. Can someone explain this difference? But what is more important: I'd like to know how much memory a process is really using. I don't want to know the virtual memory size, but rather the resident memory plus swap of a process. I have also tried to output the format param "sz" of 'ps', but the sum of this is to high (5450 MB) (param 'size' gives 8323.45 MB). Are there any other options? I really want to use this, to determine which programs/processes are eating to much memory (and swap), to kill them, because hibernate might not be working if the swap partition is to little.

  Read the article

• Internal Linux machine with Apache that I can access by IP address but not computer name

  - by Parris

  I have an Ubuntu machine running LAMP. While on the machine I can type localhost or the computers name to access htdocs. From another machine I can only access the machine via its IP Address. This just started happening recently when someone rearranged the network cables and removed a hub sitting between the machine and the network, which makes me think it wasn't all the stable to begin with anyways. Any suggestions on where I should start looking?

  Read the article

• Linux CPU Hog report

  - by bmaynard

  I am wondering if there is a tool that will monitor all the process and send a daily report of which process where hogging resources per hour or something similar? What I am after is when I see my cpu go up at certain times of the day, I want to know which processes where using the resources at that time.

  Read the article

• Configure linux machine as bridge/switch and end device

  - by leemes

  At my home, I have two desktop PCs in two rooms. The router / DSL modem is in one of these rooms. Now I want to configure a home server (having 2 LAN ports, running 24/7) in the corridor between the two rooms, using only one LAN cable at each door. This gives me the following physical configuration: (door) (door) .----/-/----. .-----/-/----------._ FritzBox | | | .----´´ DSL Router PC1 Server | PC2 As just said, the server has 2 network interfaces and is running Ubuntu. What I need now is a network configuration which enables both the server and PC1 to connect to the router. I think the server needs to serve as a bridge or switch. Currently, all computers are configured having static IP addresses. If I'm understanding it correctly, a bridge / switch doesn't have its own IP address, but as the server needs to be configured as an own end device, it needs to have one. My first question is, do I have to configure both interfaces separately, giving both the same static IP address? My next question is, how do I bridge the two physical networks into one? I have basic understanding (but am always confused again and again) of bridges and switches, but I don't know how to configure it in software. I only know that it's possible to do so :) The third question is: Is it possible to configure this in a way that network packets from/to PC1 to/from the router only go through hardware or only consume low CPU in the server? Can you help me? Thanks in advance!

  Read the article

• Which linux x86 hardware keystore?

  - by byeo

  I'm terminating SSL/TLS in my DMZ and I have to assume that machine will be hacked. At which point my certificates are compromised. Previously I've used nCipher hardware keystore/accelerator to solve this issue. These cards won't reveal the private key even to root. The card performs the encryption and decryption onboard and is hardened against physical attack. The only way to get at the keys is by attaching a smart card reader to the card itself. I'm having trouble finding information about something to recreate this approach. Is this the domain of specialist switches and firewalls these days? This old page references some of the old hardware: http://www.kegel.com/ssl/hw.html#cards

  Read the article

• SAMBA and Linux ACLs -- "Permission denied" on write to share but file written nevertheless

  - by MCH

  I set up a writable share directory "/home/net/share" with acl like this: sudo mkdir -p "/home/net/share" sudo setfacl -m "u:localuser:rwx,u:remoteuser:rwx,g:users:rwx" "/home/net/share" My /etc/samba/smb.conf looks like this: [global] workgroup = w server string = server security = user load printers = no log file = /var/log/samba/%m.log max log size = 50 dns proxy = no printing = bsd printcap name = /dev/null disable spoolss = yes encrypt passwords = true invalid users = nobody root follow symlinks = yes wide links = yes [share] comment = Writable by localuser and remoteuser path = /home/net/share valid users = remoteuser read only = no public = no printable = no Locally, localuser and remoteuser have user accounts and smbpasswds and can both read, create and delete files in /home/net/share. But when I log on from a different machine (like this: sudo mount -t cifs //server/share mountpoint/ -o username=remoteuser ), I get "Permission denied" both when trying to create directories and files, oddly though, it does create files (not directories!) despite these messages! How can I get this working?

  Read the article

• How to distill / rasterize a PDF in Linux

  - by Sampo

  We have a printer at our office that prints PDF files from a USB stick. It prints most files okay, but it has problems with some, especially ones generated with Latex. Some PDFs it simply refuses to print, some PDFs it prints with courier-type font, and some it prints fine except for equations. I'm looking for a way to "distill" PDFs into a dead-sure format to print. Either by simplifying / normalizing the PDF to the point that any renderer will render it correctly, or by simply making each page a 600dpi raster image in the PDF. (I could split the PDF into individual raster images and combine them manually, but I want something scriptable.) The output file size doesn't matter, as long as it's sure to print, has A4 paper size (or the original) and 300~600dpi resolution.

  Read the article

• libkeybinder error Arch linux

  - by Nihar Sarangi

  I am trying to install a package that depends on python-keybinder and hence on libkeybinder. When I run makepkg for libkeybinder, it starts and after sometime I get the following error: checking for XkbQueryExtension... no configure: error: Could not find XKB ==> ERROR: A failure occurred in build(). Aborting... ==> ERROR: Makepkg was unable to build libkeybinder. I tried checking the pkgbuild but wasn't able to find anything. :( Is there a workaround?

  Read the article

• Linux as a router for public networks

  - by nixnotwin

  My ISP had given me a /30 network. Later, when I wanted more public ips, I requested for a /29 network. I was told to keep using my earlier /30 network on the interface which is facing ISP, and the newly given /29 network should be used on the other interface which connects to my NAT router and servers. This is what I got from the isp: WAN IP: 179.xxx.4.128/30 CUSTOMER IP : 179.xxx.4.130 ISP GATEWAY IP:179.xxx.4.129 SUBNET : 255.255.255.252 LAN IPS: 179.xxx.139.224/29 GATEWAY IP :179.xxx.139.225 SUBNET : 255.255.255.248 I have a Ubuntu pc which has two interfaces. So I am planning to do the following: eth0 will be given 179.xxx.4.130/30 gateway 179.xxx.4.129 eth1 will be given 179.xxx.139.225/29 And I will have the following in the /etc/sysctl.conf: net.ipv4.ip_forward=1 These will be iptables rules: iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT My clients which have the ips 179.xxx.139.226/29 and 179.xxx.139.227/29 will be made to use 179.xxx.139.225/29 as gateway. Will this configuration work for me? Any comments? If it works, what iptables rules can I use to have a bit of security? P.S. Both networks are non-private and there is no NATing.

  Read the article

• linux multipath routing load balance

  - by user52883

  I would like to know how to load balance two Business DLS links which have fixed IPs. I believe it would look something like this: ip route add default scope global \ nexthop via gatewayDLS1 dev interface1 weight 1 \ nexthop via gatewayDLS2 dev interface2 weight 1 Is this be all I need in order to get multipath routing? Please, give me a more detailed answer if possible, thanks you.

  Read the article

• How to find what is written to filesystem under linux

  - by bardiir

  How can i find out what processes write to a specific disc over time? In my particular case I got a little homeserver running 24/7 and I included a script in the crontab to shutdown all drives that are not used (no change in /proc/diskstats for 15 minutes). But my system disc won't come down at all. I'm suspecting logs but it's probably not only logs writing to the filesystem on the system disk and I don't want to go all the way moving the logfiles to something else just to find out the disc still doesn't spin down and there's nothing i can do against it.

  Read the article

• Linux: grab audio from a video clip

  - by liori

  Hello, I'd like to take audio track from a video clip in FLV container and save it to something playable by portable music players. Are there any easy to use tools for that? I know how to do that using console tools (mplayer+lame/oggenc), but I'd like to get something clickable, preferably for GNOME. Thanks!

  Read the article

• copy files created in one folder to multiple other folders on linux

  - by Keith

  I'm looking for a way to copy photos that are uploaded to one folder to many other folders and visa versa. Example: a photo is uploaded to folder 1, it is then copied to folders 2-5. And if a photo is uploaded to folder 2 it is copied to folders 1 and 3-5. I'm running CentOS 5. All of these folders are on the same server. I came across another post on here that talked about incron, but that type of programming is over my head.

  Read the article

• Windows 7 Virtual PC + Linux Ubuntu

  - by Daniel Henry

  I've installed Ubuntu inside a virtual machine running on Windows 7's Virtual PC. One thing I've noticed right away is that it has to capture the mouse and not all the hardware works as expected. I didn't have such problems in my virtual Windows XP. Is there anything I need to do to either Virtual PC or within Ubuntu that will get them to cooperate as well as Windows XP seems to?

  Read the article

• new linux windows open behind existing windows

  - by Poul

  I'm running ubuntu and I have a strange issue where any new window I open (open office doc, pidgeon window, etc) open behind current windows. this is frustrating, especially for IM windows as I often don't see the window. Has anyone ever had this issue, and know how to resolve it? Thanks!

  Read the article

• configuring linux server firewall to allow acces on a certain range of IP addresses

  - by eggman20

  Hi Guys, I'm not sure if this is the right place to ask this but I'm currently trying to get an Ubuntu 10.10 server up and running for the first time and I'm using Webmin for administration. I'm stuck on the setting up the firewall. What I need to do is to ONLY allow a range of IPs (e.g 128.171.21.1 - 128.171.21.100) to access the HTTP server and Webmin. I've seen a lot of tutorials but none of them fits what I needed. Thanks in advance!

  Read the article

• New Windows 2008 server on Linux Domain

  - by DevNULL

  We just installed a Windows 2008 Enterprise server and I'm having a problem joining the domain. We're running Ubuntu Server, OpenLdap with Samba shares. Does anyone know of reference material where I can find information about getting this server to properly join our domain. I've tried googling various boolean searches with poor results.

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >