Search Results

Search found 4001 results on 161 pages for 'operating'.

Page 124/161 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• On Windows and Windows 7's Task Manager, why Memory is 1118MB Available but only 62MB Free? [closed]

  - by Jian Lin

  Possible Duplicate: Windows 7 memory usage What are the "Cached", "Available", and "Free" memory in the following picture (From Windows 7's Task Manager). If it is 1118MB Available, then why isn't it Free (to use)? As I understand it, if a bowl of noodle is available, that doesn't mean it is free... it may still cost $7. But what about in the Task Manager, when it is Available, it is also not Free? Does it cost $2 per MB? What about the "Cached"... What exactly is the Cached Memory? We may put some hard disk data in RAM and so we cache the data in RAM, for faster access (that's the operating system's job). So the Total Physical RAM is 6GB, what is the 1106 Cached? Cached in where? Caching physical RAM in ... some where? It is also strange that the Cached value is sometimes higher and sometimes lower than the Available value. Can somebody who is knowledgeable about this shred some light on these meanings?

  Read the article

• Portable USB drives hidden pertition - New request

  - by ZXC

  This question was made by Francesco on Jul 29 '11 at 17:14. and the replies were not satisfactory due they not point to an important problem that´s: Why could anyone want to make certain data only accesible for a program but not to the users?. For example: If I want to do a safe distribution of original music for demostration purposes I will need several requisites: 1) The music should be heard using a simple procedure like selecting the name of each song on a playlist of a mediaplayer. 2) The portable media, ussually a portable USB drive, must hide for complete and should make unaccesible the files that contain the audio data to anything but the mediaplayer, that must be in the first partition, the one that is visible. 3) Considering that´s impossible to really hide files in a non-hidden partition, a second hidden partition should be created in the USB drive and the audio data will be stored there. 4) The trick is to read the audio data files stored in the hidden partition with a mediaplayer stored in the visible partition, the media player also should be a complete standalone program and independent from any library of the operating system except of the OS audio system. 5) The hidden partition should have a copy protection scheme that could impede to do copies of the data or create working ISO images of it. I know that this description could not be technically accurate but it has a complete logic from the needs of a music producer against the problem of piracy. The philosophy that surrounds the concept is to transform a virtual object like a digital string of audio in a solid object like the analog vinyl discs are.

  Read the article

• SQL Server 2008 R2 mirroring failing

  - by andriusn

  I have two Windows 2008 R2 (Amazon EC2) instances running SQL Server 2008 R2. I use 9TB striped disks (9x1TB EBS volumes) for storage. One server is running as principal and second one as mirror. Both started from the same image, database and tlog files located on striped disk. Mirror server failed 3 times in last 2 months with errors: EventID 823 The operating system returned error 2(The system cannot find the file specified.) to SQL Server during a write at offset 0x00000048058a00 in file 'D:\TLogs***_log.ldf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. and EventID 1454 Database mirroring will be suspended. Server instance 'xxxxxxxxxx' encountered error 823, state 6, severity 24 when it was acting as a mirroring partner for database '***'. The database mirroring partners might try to recover automatically from the error and resume the mirroring session. For more information, view the error log for additional error messages. followed by EventID 19019 The MSSQLSERVER service terminated unexpectedly. After this rebooting instance is necessary to restore mirroring. First two times I thought it was hardware related (striped disk failure) and relaunched instance on new hardware. But the issue is back after few weeks again. It only affects mirror instances. Any help would be really appreciated. Thanks.

  Read the article

• Can't ping my Window 7 machine from within a Windows XP virtual machine

  - by Jonathan Conway

  I have Windows 7 installed as my primary operating system, on a laptop that's on my home network (wireless). I'm using Microsoft Virtual PC 2007 SP1 to run a virtual machine of Windows XP SP3, in which I want to access the Windows 7 instance, both to browse a shared folder and access the local Apache server. So far I can ping my Windows 7 IP address (IPv4) and access the apache server through the web browser through HTTP. However using my machine name never seems to work. Pinging it fails, and I can't access my apache server using it either. The problem seems to be something to do with my machine's name being registered under IPv6 rather than IPv4. I'm at a loss what to do. Should I try to set up IPv6 on the virtual machine? Not sure how to go about that. Or maybe I should somehow get my machine name on Windows 7 to work with IPv4? Although I think it already does, because I can ping it from a separate box (running Ubuntu), which is only registered under IPv6.

  Read the article

• VMware Workstation reboot 32-bit host when starting 64-bit guest

  - by Powerman

  I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas?

  Read the article

• Have local admin privileges on Windows XP, but getting "Error terminating process: Access is denied"

  - by Chris W. Rea

  On one of the Windows XP machines I use regularly, there is a process that starts up periodically. I'd like to be able to kill the process – sometimes – because it occasionally runs when I'm busy doing something machine-intensive. I've already tried dropping the process priority to "Idle" to mitigate the effects, but it isn't the CPU that's the problem. Rather, the process is very disk-intensive and no matter the process priority, it still causes significant disk thrashing when running, impacting everything else I'm doing at the time. Using Process Explorer, I can find the process, right-click, and choose Kill Process, but I always get the message "Error terminating process: Access is denied." This is not an operating system process, but third-party software. What might that process be doing to prevent itself from being terminated? How can I kill such a process? Is there a way for me to modify the process's security or access control list (ACL) somewhere, using Process Explorer or another tool, so that I can effectively kill it?

  Read the article

• Where can I find a useful multi-language Unicode font for Mac OS X?

  - by Stephen Jennings

  On every browser I've tried (Firefox, Safari, Chrome, and Omniweb), when I go to a web page containing somewhat less-common characters, I can't see the glyphs. For example, on the Wikipedia page for the Bengali Language, the very first line contains a string of squares; on Windows, I can see the Bengali writing. Firefox does display code points on the Coptic Language article, but not Bengali. I'm not sure why. On Windows, as long as I have the Arial Unicode MS font installed, these characters fall back to that font and display properly. Mac OS X doesn't seem to ship with a font containing these Unicode characters (it has Arial Unicode MS, but it must be a subset of the Windows version because Bengali doesn't display in that font). I checked on my Snow Leopard DVD and I installed "Additional Fonts" from the Optional Installs package, but I'm still missing many languages. Is there any good, free font that contains a large collection of languages? I know creating fonts is difficult and time-consuming, but it seems like including at least one font like this with operating systems should be standard by now.

  Read the article

• Which ports are needed for NTLM (Windows Authentication) to connect to SQL Server?

  - by Adam Bellaire

  I've got SQL server running on a machine which is not in a domain, and which is not operating in mixed mode (it's running with "Windows Authentication"). I'm trying to connect to it from a Linux web server running freetds via TCP/IP, using NTLM to authenticate. The firewall on the SQL server is very restrictive. 1433 is open to my web server, but I'm getting conflicting information from the web on what additional ports (TCP/UDP) are needed for NTLM to succeed. It is currently fail; I can talk on 1433 to request NTLM, but the actual authentication always fails. One source says 137, 138, 139, but those are just the NetBIOS ports. Do I really need those? Another source says 135. Still others seem to say 1434... I can't make heads or tails of it. Dammit Jim, I'm a programmer, not a network administrator! EDIT: The exact error message: Msg 18452, Level 14, State 1, Server , Line 0 Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Msg 20002, Level 9, State -1, Server OpenClient, Line -1 Adaptive Server connection failed I am attempting to connect with a remote machine username, i.e. 'servername\username'. Some sources recommend that I set up mirrored accounts on the local and remote machines, but the local machine is running Linux, not IIS under Windows.

  Read the article

• Why a 10 years old software still is so slow even today?

  - by Cawas

  I just noted this question due to a game (which happens to be Diablo 2), but the matter of fact is: why is my brand new mac book pro, made in 2009 with latest technology (tho it's the cheapest one) can't rival my computer which used to run this much faster back in 2000? Really, it was much faster on my AMD K6 450 back in those days, and I could even run two clients at same time with no slow down. I've always had the feeling this machine was slow, but this is a very odd way to attest it. Granted, the machine is smaller, runs on wifi and "boots" way faster thanks to sleep mode. But other than that, what have we evolved after all?! I'm pretty sure this shouldn't be graphical card's fault. Sure if I buy latest technology it will run fast, and probably most people here can confirm this and won't even understand my question. But the thing is, all the hardware is supposedly much faster and better than the stuff from 10 years ago. The software and operating system became more complex, but also more well refined. Now I'm trying a piece of software that is actually 10 years old and it's not getting any better results! Why?

  Read the article

• SQL Server 2008 R2 - Cannot create database snapshot

  - by Chris Diver

  Server: Windows Server 2008 R2 X64 Enterprise SQL: SQL Server 2008 R2 Enterprise X64 I have a default SQL Server instance, the SQL Server service account is running as a domain user. I am trying to create a database snapshot in the directory where the mdf files are stored. The T-SQL syntax is correct. The file system is NTFS. The error message I get is: Msg 1823, Level 16, State 2, Line 1 A database snapshot cannot be created because it failed to start. Msg 5119, Level 16, State 1, Line 1 Cannot make the file "e:\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\TestDB.ss" a sparse file. Make sure the file system supports sparse files. The local SQLServerMSSQLUser$db$MSSQLSERVER group has Full Control permission on the folder where I am trying to create the snapshot. I can fix the problem in two ways, neither of which are suitable. Add the SQL Server service (domain) account to the local Administrators group and restart the SQL service. Grant the local SQLServerMSSQLUser$db$MSSQLSERVER group Full control on E:\ I have tried to change the owner of the DATA directory to SQLServerMSSQLUser$db$MSSQLSERVER to no avail. I have no issue creating a new database Why can I not create a snapshot by giving permission only on the DATA folder? Update 23/09/2010: I have tried mrdenny's suggestion with no luck (but learned something new in the process), I suspect the problem may be due to the fact that the domain is a windows 2000 domain running in mixed mode. I had to install hotfix KB976494 for Server 2008 R2, as the SQL Server 2008 R2 installer would not verify the service account correctly with the domain. I noticed that Server 2000 isn't a supported operating system for SQL 2008 R2 but cannot find anything that would suggest it shouldn't work in a 2000 domain. I dis-joined the test server from the domain and changed the service accounts to the local service account and I still have the same issue. I will try to re-install the server without joining the domain and without the hotfix and see if the issue persists.

  Read the article

• Command prompt hangs/freezes/crashes sporadically

  - by Leonard Challis

  I'm finding it very difficult to Google this, I don't seem to be able to find anyone with the same issue and I don't know enough about the Windows operating system to troubleshoot. The machine(s) we are seeing the problem on are Windows 7 (professional) both 64bit and 32bit. The problem is with the command prompt freezing up, seemingly randomly. When it does freeze nothing will bring it back to life (i.e. keypress) and it's nothing to do with Quick Insert mode either. It doesn't seem to be when I run standard commands, such as cd, dir, etc, but when I run different programs from the command line. The annoying thing is that sometimes the prompt will freeze and at other times it won't, using the same program/command in the prompt. To add to the frustration, one of my colleagues who had the same problem seems to not have experienced it for a few days now (we're pretty heavy on the command line). It's not a VPN/RDP thing as suggested in other questions and forum posts, as I've seen this both locally and remotely. I thought it was to do with the return code signifying an error or some error state in the program, i.e.: C:\Users\leonardc>mysql -u lalala ERROR 1045 (28000): Access denied for user 'lalala'@'localhost' (using password: NO) but this isn't always the case either. In fact the above command hasn't crashed the shell before. Elevating the prompt to run as Administrator doesn't seem to have any bearing on the problem either. Disabling my anti-virus doesn't have an effect either. Update: I tried the same commands in PowerShell, but I still get the same problem, it will freeze at random times (more often than not, as with the command prompt, but not always). It's not the same as command prompt in the fact that one might work while the other doesn't, but then the next time I try run the same command in both it will suddenly be different again.

  Read the article

• CentOS tftp server is broken

  - by Mike Pennington

  I'm trying to run tftpd from xinetd on CentOS 6; however, I can only tftp from localhost. I have a file in /opt/tftpboot/fw.test.conf that I can retrieve if I tftp to localhost: [mpenning@localhost ~]$ tftp localhost tftp> get fw.test.conf tftp> quit [mpenning@localhost ~]$ ls fw.test.conf [mpenning@localhost ~]$ However, I cannot receive this file if I tftp to eth1 on this server (the address on eth1 is 172.16.1.4). [mpenning@localhost ~]$ sudo tshark -i eth1 udp and host 172.16.1.5 Running as user "root" and group "root". This could be dangerous. Capturing on eth1 0.000000 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 5.000133 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 10.000184 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 15.000297 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 20.000331 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 ^C5 packets captured [mpenning@localhost ~]$ I have the following xinetd configuration: [root@localhost mpenning]# cat /etc/xinetd.d/tftp # default: off # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download configuration files to network-aware printers, \ # and to start the installation process for some operating systems. service tftp { socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -s /opt/tftpboot disable = no per_source = 11 cps = 100 2 flags = IPv4 } [root@localhost mpenning]#

  Read the article

• tcp msl timeout

  - by iamrohitbanga

  The following is given in the book TCP IP Illustrated by Stevens Quiet Time Concept The 2MSL wait provides protection against delayed segments from an earlier incarnation of a connection from being interpreted as part of a new connection that uses the same local and foreign IP addresses and port numbers. But this works only if a host with connections in the 2MSL wait does not crash. What if a host with ports in the 2MSL wait crashes, reboots within MSL seconds, and immediately establishes new connections using the same local and foreign IP addresses and port numbers corresponding to the local ports that were in the 2MSL wait before the crash? In this scenario, delayed segments from the connections that existed before the crash can be misinterpreted as belonging to the new connections created after the reboot. This can happen regardless of how the initial sequence number is chosen after the reboot. To protect against this scenario, RFC 793 states that TCP should not create any connections for MSL seconds after rebooting. This is called the quiet time Few implementations abide by this since most hosts take longer than MSL seconds to reboot after a crash. Do operating systems wait for 2MSL seconds now after a reboot before initiating a TCP connection. The boot times are also less these days. Although the ports and sequence numbers are random but is this wait implemented in Linux?

  Read the article

• Computer locking up, looking for bootable hardware diagnostic tool.

  - by Carl Menke

  Well today I helped my friend build a computer. All went pretty well until we got to installing Win7. Thing is, we thought, it was crashing constantly. I adjusted pretty much every setting in the BIOS and removed as much hardware as possible to try and prevent a crash. No dice. So far I've tried running an Ubuntu live cd without the harddrive installed. Nope, crashed on boot. And then I just tried Microsoft's ram utility disk and it eventually locked up on that (the ram passed though). So it seems to me like it's either the CPU (AMD PhenomII x3) or the motherboard that could be bad, but I don't know how to test them individually for problems. I thought it could be a overheating issue, but the BIOS reports that the CPU temp is fine idling around 34C. Any advice or diagnostic disk that could help me out? TL;DR: Computer locks up frequently during use (cannot even boot/install an operating system), memory is fine, probably CPU or Mobo, BIOS says CPU temps are fine. What should I try?

  Read the article

• Integration of SharePoint 2010 with TFS2010

  - by Kabir Rao

  We have performed following steps as of now- Install TFS2010 10.0.30319.1 (RTM) on Windows Server 2008 R2 Enterprise(app tier) SQL 2008 SP1 with Cumulative update 2 on Windows Server 2008 R2 Enterprise(data tier) Reporting Service is installed on app tier. After this installation worked fine we installed SharePoint 2010 on app tier. After installation we followed http://blogs.msdn.com/b/team_foundation/archive/2010/03/06/configuring-sharepoint-server-2010-beta-for-dashboard-compatibility-with-tfs-2010-beta2-rc.aspx for configuration. We are not able to perform the last step described in the link as following error occured- TF249063: The following Web service is not available: http://apptier:31254/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. The underlying error is: The remote server returned an error: (404) Not Found.. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://apptier:31254. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. We have also noticed that Document Folder in Team project also have red x. Please help. Thanks upfront.

  Read the article

• Windows Remote Desktop: "configuring remote session" closes without error

  - by icelava

  I have a desktop/laptop pair at home operating x64 Windows 7 (the desktop was upgraded from Windows Vista, works just fine). I remote desktop to them on a daily basis when outside. In recent weeks, I would occasionally fail to connect to my desktop. It can connect and authenticate fine, but the "configuring remote session" dialog would simply close and not show me the desktop window or any error message. There is no error event log relating to this on the desktop computer. Some suggestions call for disabling remote audio, which mine already is, but trying different audio modes did not yield any different result. I am not too sure if this is related to video card drivers (they do get auto-updated), since remote desktop video is supposed to steer via a virtual device driver? Nonetheless the desktop operates three monitors via an ATI Radeon HD5770 (1 Displayport, 2 DVI). I do not see a real problem with that since I can mostly connect and operate it remotely. I try to "remote tunnel" via my home laptop but obviously won't work either as the problem lies in the desktop. What other conditions can cause remote desktop to break without error? UPDATE I came home and still couldn't connect to the desktop until I restarted the entire system.

  Read the article

• Google Chrome doesn't delete my browsing history correctly

  - by Derfder

  I have deleted everything that I could from my browser history: chrome://settings/clearBrowserData I checked everything and select the begining of time Then when I access browsing history: chrome://history/ There is nothing (as I expected), or to be precise No history entries found. The problem is that I still see my specific search url with very specific query I have made a month ago, when I start typing the url of the website into chrome address bar. How is that possible? Where is Google stroing these data. How to get rid off them completely? I want to mention that my autosuggestion options look like this: So, what else should I delete to remove everything from autosuggestions? Right now it has some specific URLs (subpages, pages with very specific search query I have made in a month or so). I have tried restarting Chrome and restarting my computer, but the urls are still in the autosuggestion. Also I am unable to turn off the autosuggestion, even I have unchecked that option in settings. My Google Chrome version is: Version 27.0.1453.116 m (probably the latest) Btw. in Firefox deleting the history works as expected. So, I guess that this has nothing to do with the operating system I am using (Windows 7), but only it's an issue with Chrome itself.

  Read the article

• Why can't I boot in to Windows Recovery Environment to fix my HDD or salvage my data?

  - by Kevin

  I've been trying to get in to WindowsRE to salvage the files on my Sony Vaio laptop after it failed to load Vista (it finally, consistently displays "Error loading operating system" after months of such intermittent failures, usually rectified via restarts or utilizing Startup Repair or CHKDSK from WindowsRE) . The problem is, after successfully accessing it once after this failure (and many times before over the course of the laptop's life), I can no longer get it to load. During the last successful access (right after the failure), I ran startup repair, which itself failed and notified me that the boot sector was corrupt. I attempted to head in to Sony's proprietary recovery tools menu, which is accessible from WindowsRE when it is loaded from the recovery partition or recovery disk, however it hung. I have since been unable to access the recovery environment after restarting, using any of these methods: Access via the recovery partition (pressing F10 on boot) Access via recovery DVD (created using the same computer when it was healthy) Access via a Windows Vista installation DVD All three methods produce the same results: The computer acknowledges the boot attempt The computer successfully gets passed the "Windows is loading files" screen The computer successfully gets passed the Windows loading screen The computer then stalls at a black screen, while showing HDD activity (via indicator light). After a few minutes, the HDD activity ceases, and after a few more minutes, the over sized cursor that is utilized in WindowsRE appears on the black screen. The actual recovery environment, however, never appears, even after leaving the computer in such a state overnight. What is fustrating is that other bootable utilities, such as SeaTools for DOS and MemTest, boot up and run fine. In running perfectly normally, MemTest was able to produce a plethora of errors utilizing my RAM. I'm inclined to believe the RAM's faultiness may causing the WindowsRE booting to fail. Would this be a valid assumption? If I'm not mistaken, booting from external media utilizes the RAM, so such a reason is plausible, assuming my knowledge of bootloading is correct. Other than that, I can't figure out any reason why all the bootable utilities except WindowsRE run fine. Does anyone know what the problem is, or could be? Any solutions?

  Read the article

• Do entries in local 'hosts' files override both forward and reverse name lookups?

  - by Murali Suriar

  If I have the following entries in a hosts file: 192.168.100.1 bugs 192.168.100.2 daffy.example.com 192.168.100.3 elmer.example.com. Will IP-name resolution attempts by local utilies (I assume using 'gethostbyaddr' or the Windows equivalent) honour these entries? Is this behaviour configurable? How does it vary between operating systems? Does it matter whether the 'hosts' file entries are fully qualified or not? EDIT: In response to Russell, my test Linux system is running RHEL 4. My /etc/nsswitch.conf contains the following 'hosts' line: hosts: files dns nis If I ping any of my hosts by name (e.g. bugs, daffy), the forward resolution works correctly. If I traceroute any of them by IP address, the reverse lookup functions as expected. However, if I ping them by IP, ping doesn't appear to resolve their host names. My understanding was that Linux ping would always attempt to resolve IPs to names unless instructed otherwise. Why would traceroute be able to handle reverse lookups in hosts files, but ping not?

  Read the article

• Need advice on a monitoring, reminder and warning application.

  - by cbmeeks

  I am a developer that also has to monitor several things on different servers. Such as: 1) Did all of the MS SQL databases backup last night? 2) Did all of the MySQL databases backup last night? 3) Were the database dumps actually copied to the right folder? 4) How much free space is left on each server's hard drives? 5) How big are folders "abc", "def", "etc" getting? 6) Send emails/alerts when thresholds are reached Etc. Just basically something to help me NOT forget such important things. I thought about writing something myself but didn't want to waste the effort if something is already out there. I would also prefer one application instead of many if I could. Thanks. EDIT Forgot to mention the operating system. These run on Windows Server 2003 and/or 2008. In fact, what would be cool is a program that supports multiple servers from one machine. Something that can log into those servers.

  Read the article

• MS licensing of multiple RDP sessions for non-MS products in Windows XP Pro

  - by vgv8

  Question 1) and 2) were moved into separate thread Which Windows remote connections bypass LSA? and what r definitions of login vs. logon session? 3) Do I understand correctly that multiple remote RDP sessions are supported by Windows XP but require additional (or modified) licensing? Which one? Or it is always illegal to run multiple RDP sessions on Windows XP? even through non-MS commercial software? ---------- Update1: I already understood my error - the main questions were about definitions (important to find the common language with others) and the licensing questions were collateral - but it was already answered. I shall try to separate these questions leaving here the questions about RDp licensing and migrating other questions into separate thread ---------- Update2: Trying to "work around" licensing terms is pointless and wasteful of time I never try "working around" and I never ask anything like this, I am not specialist in licensing. My clients/employers provide me with tools and licensing support. They have corporate lawyers, planning/accounting/purchase departments for these issues. The questions that I ask is the matter of scalability and efficiency (saving my and others time) in my developing work. For ex., Just because I need autentication against Windows AD it is time-saving to use ADAM instead of deploying full-fledged AD with DC + servers + whatever else? Nobody is forcing you to use Windows XP I shall not rush into re-installing all my operating systems on all my development machines (at home, at client premises) just because a few guys have a lot of fun downvoting development-related questions in serverfault.com. If I do so, I make a joker from me in the eyes of my clolleagues et al Update: I unmarked this question as answered since it had not even adressed the question, at least mine. Should I understand that Terminal Server PRO, allowing Windows® XP and Windows® Small Business Server 2003 to host multiple remote desktop sessions, is illegal? Related: My answer to question Has windows XP support multiple remote login session (RDP) at a time?

  Read the article

• Interactive console based CSV editor

  - by Penguin Nurse

  Although spreadsheet applications for editing CSV files on the console used to be one of the earliest killer applications for personal computers, only few of them and even less documentation about them is still actively maintained. After having done extensive search on the web, manpages and source code, I ended up with the following three applications that all have fundamental drawbacks: sc: abbrev. for spreadsheet calculator; nice tool with vi keybings, but it does not put strings containing the delimiter into quotas when exporting to delimiter separated format and can't import csv files correctly, i.e. all numbers are interpreted as strings GNU oleo: doesn't seem to be actively maintained any longer since 2001 and there are therefore no packages for major linux distributions teapot: offers packages for various operating systems, but uses for example counter-intuitive naming for cells (numbers for row and column, i.e. 11 seems to be intended to be row 1, column 1) and superfluous code for FLTK GUI Various Emacs modes also do not quote strings containing the delimiter well or are require much more typing for entering the scaffold of a table. Therefore I would be very grateful for overcoming one of theses drawbacks or any hints towards another console based CSV editor. It actually needn't do any calculations just editing cells or column- and rowise.

  Read the article

• How to run a website domain without redirecting if IP is already used for another website? [duplicate]

  - by SSpoke

  This question already has an answer here: Hosting multiple distinct folders for distinct domains 1 answer I bought a VPS Host that gave me only 1 IP Address which I used on my first domain name and it works without any problems. Now my second domain name I can't use the same ip address as it points to the first domain name. So I figured my only option was to use a GoDaddy hosted iframe redirection which redirects to a sub folder on my first domain which worked so far. Now I'm trying to load paypal from <?php headers() ?> and I get a permission error because of that iframe Refused to display 'https://www.paypal.com/cgi-bin/webscr?notify_url=&cmd=_cart&upload=1&business=removed&address_override=1' in a frame because it set 'X-Frame-Options' to 'SAMEORIGIN'. How do I avoid the Iframe solution for my second domain while not messing up my first domain? Somebody I forgot once told me it doesn't matter if you have 1 IP Address you could host multiple websites on it? how it that possible the DNS doesn't seem to work off ports afaik, yes I could host multiple websites on different folders but that's not what I call hosting a real website it has to be pointed by a domain name, so this iframe issue doesn't happen My server configuration is httpd (apache) that comes with CentOS 6 (Linux) operating system

  Read the article

• SSL Returning Blank Page, No Catalina Errors

  - by Mr.Peabody

  This is my second, maybe third, time configuring SSL with Tomcat. Earlier I had created a self signed, which worked, and now using my signed is proving fruitless. I am using Tomcat, operating from the Amazon Linux API. When using the signed cert/keystore, my server is starting normally without errors. However, when trying to navigate to the domain it is giving me an "ERR_SSL_VERSION_OR_CIPHER_MISMATCH" error. My server.xml file looks as follows: <Connector port="8443" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" disableUploadTimeout="true" acceptCount="100" scheme="https" secure="true" SSLEnabled="true" clientAuth="false" sslProtocol="TLS" keystoreFile="/home/ec2-user/.keystore/starchild.jks" keystorePass="d6b5385812252f180b961aa3630df504" /> It couldn't hurt to also mention that I'm using a wildcard certificate. Please let me know if anything looks amiss! EDIT: After looking more into this, I've determined there may be nothing is wrong with the Server.xml, or the listening ports. This is becoming more of an actual certificate error, as the curl request is giving me this error: curl: (35) Unknown SSL protocol error in connection to jira.mywebsite.com:-9824 Though, I can't seem to figure out what the "-9824" is. When comparing this curl to another similar setup (using the same Wildcard Certificate) it's turning up the full handshake, which is to be expected. I believe this is now between the protocol/cypher set default on JIRA servers.

  Read the article

• Why do my backup fail when I target a network share hosted by a Synology DS211 disk station?

  - by Larry

  My backups are failing when I try to use a network share hosted by a Synology DS211 disk station. They work fine if I target a different network share (i.e. \server1\data\larry). When I run the following command: Wbadmin start backup -backupTarget:\\diskstation\backup-larry -include:C: This is what I get: wbadmin 1.0 - Backup command-line tool (C) Copyright 2004 Microsoft Corp. Note: The backed up data cannot be securely protected at this destination. Backups stored on a remote shared folder might be accessible by other people on the network. You should only save your backups to a location where you trust the other users who have access to the location or on a network that has additional security precautions in place. Retrieving volume information... This will back up volume WIN7(C:) to \\diskstation\backup-larry. Do you want to start the backup operation? [Y] Yes [N] No y Note: The list of volumes included for backup does not include all the volumes that contain operating system components. This backup cannot be used to perform a system recovery. However, you can recover other items if the destination media type supports it. The backup operation to \\diskstation\backup-larry is starting. Creating a shadow copy of the volumes specified for backup... Creating a shadow copy of the volumes specified for backup... The backup operation stopped before completing. Summary of the backup operation: ------------------ The backup operation stopped before completing. Detailed error: Access is denied. Windows Backup failed to write the file: '<backup location>\WindowsImageBackup\<Computer Name>\MediaId'. Access is denied. The backup creates the following path \\diskstation\backup-larry\WindowsImageBackup\LARRY-MYDOMAIN\ but its empty. I definitely have read/write access on the target directory (\diskstation\backup-larry). I have verified this by looking at the permission and by actually copying files to this location. Any suggestions?

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >