Search Results

Search found 4100 results on 164 pages for 'recommend'.

Page 124/164 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• What LTO 4 drive to buy

  - by pplrppl

  Evan Anderson mentioned in another solution you could buy a LTO-4 (autoloader, 1 tape / day) - $4,566.00 (the discussion included total cost of tapes for a specific rotation.) but I don't know specifics on what he or you would recommend for the actual drive and if necessary controller. Show me a newegg URL or CDW, Dell, or HP, or whatever your favorite vendor would be for your solution if you don't mind looking it up or just give me a brand and a model number and I'll be glad to do the leg work myself. I currently have on have on hand an external LTO 3 drive that uses LVD SCSI interface (and thus have a controller card that has an external LVD SCSI connector). If that card isn't sufficient to interface to a LTO 4 drive let me know. http://www.fujifilmusa.com/shared/bin/LTO_Overview.pdf shows minimum tape speeds for LTO4 and other LTO formats. It looks like the IBM LTO4 actually has a lower minimum speed than the IBM LTO3. Either way my average server is too slow to feed LTO3/4 without shoeshining so I'm looking for a drive with a low minimum write speed. If you trust the PDF from 2008 that makes my choices IBM LTO 4 full height IBM LTO 4 half height HP LTO 4 half height but presumably there are other options out there that weren't mentioned in the fuji PDF. Again I'm looking for a specific recommendation on a drive to buy (and the controller if needed).

  Read the article

• Recommended partitions to migrate from Windows XP to Windows 7 and Ubuntu

  - by Juanillo

  Hello, I have a system with Windows XP. My hard disk has 189 GB NTFS. I want to change the operative system to windows 7, but I want to add Ubuntu as well. As the change might take several days (because I don't have much time) I want to install one system (or Windows 7 or Ubuntu) keeping my windows XP installed in another partition so if something doesn't work in thebrand new operating system installed I can use my Windows XP installation. So I've thouht about doing something like this: Copy the data I want to keep to an external hard disk. Make partitions enough to install windows 7, keep data in another partition and another one to install Ubuntu. Copy the data I want to keep to the partition I've just created. Install Ubuntu in the partitions for Ubuntu. Check if Ubuntu works fine If it works OK install Windows 7 on the partition of Windows XP (Windows XP will be erased). Reinstall the programs in Windows 7. So my question is: How many partitions do you recommend me to have (and the size of each one and NTFS or FAT32)? The operative system I'm going to use more is Windows 7 (though I love Linux I use many programs which are windows dependant). Do you think I should do anything else / change something in the proccess to avoid any problem? I don't know if making the partitions can harm the data I have in the disk. Thanks.

  Read the article

• VoIP setup for one external PSTN line

  - by Jcl

  I'm completely new to VoIP and the likes, and I'm trying to find information about what could be the best setup for this. I need 4 (maybe more in the future, but maximum 5 or 6) wireless extensions, connected to 1 PSTN line, and maybe 2 in the future. I've been trying to gather information about the gear needed but everything I find seems too much over-the-top (and extremely expensive). The main problem is that the physical place we are on doesn't have possibilities of having a decent internet connection, so using a external VoIP "virtual PBX" is not an option. Thing is, even if small, phone is critical to this organization. I currently have an analog DECT/GAP PBX which does what I need, however the PBX is very bad and the call quality is horrible, and that's why I want to change it. The requirements would be: 4 wireless terminals (routing cable is not an option), all of them ringing on incoming PSTN calls. Ability to do internal calls (4 separate offices) and ability to pass calls between terminals. The 4 terminals should be able to access the external PSTN line without dialing any special codes. Very important: terminals should be able to issue commands on the PSTN line to the external operator in the form *nn*nnnnnnnn# . Don't know wether this could face to be a problem, but I've had problems with analog PBX which would take any * as a PBX command and wouldn't allow terminals to send it to the external lines. Not so important, but would be nice to have: call waiting music Could anyone recommend such a setup? I need to be able to do this on a EXTREMELY LIMITED budget (that is: I don't have a limit, but all should get as much to zero as possible). I have enough spare powerful computers and a 300mbps wireless network which works just fine, so that's not to include in the budget. Don't really know if this is the best place to ask, but it's the most StackExchange-related site I've found to this subject.

  Read the article

• Is this memory compatible with this motherboard???

  - by ClarkeyBoy

  Hi, I have a Foxconn P35AP-S as seen here. I need to get some more RAM since I only have 1 2GB stick. The current one is 1066MHz. I would like to get the memory situated here: www.scan.co.uk/Products/6GB-(3x2GB)-Corsair-XMS3-Classic-DDR3-PC3-10666-(1333)-Non-ECC-Unbuffered-CAS-7-7-7-20-165V memory. It is 6GB of Corair 1333MHz memory. According to the motherboard website it is able to take 1333MHz, but it says oc** next to it (which means achieved when overclocked). So my question is: are they still compatible without overclocking, or does the motherboard require overclocking to be compatible? If it requires overclocking (which I have no idea how to do) can anyone recommend any other memory (in the region of 6GB) which the motherboard is compatible with? I'd rather it were from Scan, but to be honest it doesnt need to be. Many thanks in advance. Regards, Richard Edit: I just realised that the motherboard has a maximum capacity of 4GB of RAM. Scrap the RAM given above, I'd like to go for something like that but only 4GB. Edit: Scrap that last edit - its only if I go for DDR3 that I need to take this into account. DDR2 is a maximum of 8GB.

  Read the article

• Different versions of iperf for windows give totally different results

  - by Albert Mata

  Measuring TCP output from a Windows client to Solaris server: WXP SP3 with iperf 1.7.0 -- returns an average around 90Mbit Same client, same server but iperf 2.0.5 for windows -- returns an average of 8.5 Mbit Similar discrepancies have been observed connecting to other servers (W2008, W2003) It's difficult to get to some conclusions when different versions of the same tool provide vastly different results. Example below: C:\tempiperf -v (from iperf.fr) iperf version 2.0.5 (08 Jul 2010) pthreads C:\tempiperf -c solaris10 Client connecting to solaris10, TCP port 5001 TCP window size: 64.0 KByte (default) [ 3] local 10.172.181.159 port 2124 connected with 10.172.180.209 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.2 sec 10.6 MBytes 8.74 Mbits/sec Abysmal perfomance, but now I test from the same host (Windows XP SP3 32bit and 100Mbit) to the same server (Solaris 10/sparc 64bit and 1Gbit running iperf 2.0.5 with default window of 48k) with the old iperf C:\temp1iperf -v iperf version 1.7.0 (13 Mar 2003) win32 threads C:\temp1iperf.exe -c solaris10 -w64k Client connecting to solaris10, TCP port 5001 TCP window size: 64.0 KByte [1208] local 10.172.181.159 port 2128 connected with 10.172.180.209 port 5001 [ ID] Interval Transfer Bandwidth [1208] 0.0-10.0 sec 112 MBytes 94.0 Mbits/sec So one iperf with a 64k window says 8.75Mbit and the old iperf with the same window size says 94.0Mbit. These results are constant through repeated tests. From my testing launching iperf(old) with window size "x" and iperf(new) with window size "x" instead of producing the same or very close results produce totally different results. The only difference I see is the old compiled as win32 threads vs. pthreads but parallelism (-P 10) appears to work in both. Anyone has a clue or can recommend a tool that gives results I can trust?? EDIT: Looking at traces from (old) iperf it sets the TCP Window Scale flag to 3 in the SYN packet, when I run the (new) iperf this is set to 0 in the initial packet. A quick analysis of the window size through the exchange shows the (old) iperf moving back and forth but mostly at 32k while the (new) iperf mostly keeps at 64k. Maybe it will help somebody to connect the dots.

  Read the article

• Please advise on VPS config choice (with SQL Server Express)

  - by tjeuten

  Hi all, I might be interested in getting a VPS hosting plan for some small personal sites and .NET projects. Was thinking of Softsys Bronze Plan, as my current shared host plan is with them too. The stuff I want to host has grown beyond the capabilities of a Shared hosting plan, and I also want more control over the IIS/ASP.NET configuration, that's why I'm considering VPS. The main config details would be: Hyper-V 30 GB of diskspace 1 GB of RAM More info here: http://www.softsyshosting.com/Windows-VPS-HyperV.aspx Does anyone have experience with this plan (or something similar from another host), and maybe could answer these couple of questions: Bronze has a total diskspace of 30GB. Is the OS part of this quota or not ? If so, how much does a base configuration with Windows 2008 take up in diskspace ? Would you advise Windows 2008 R2 or Normal. Or would you advise to use Windows 2003 with this config. I'm planning on running a SQL Server Express install too. Would 1 GB of RAM be enough for both the Windows 2008 (R2) and SQL Express. The database load will not be that very high (a couple of 1000 records returned each day). The DB will most likely be far away from the 4GB limit, that's why I'd go for a SQL Express instead of paying extra licensing costs for a SQL Web install. But I'm more concerned about performance. Would you recommend Softsys as a VPS host ? I've been with them for one year for my Shared hosting plan, and have no complaints so far. Also, as I have no VPS experience, what are the pitfalls I need to be aware of, in terms of performance mainly, but maybe in other areas too ? Mathieu

  Read the article

• Audio card with built-in ground isolator?

  - by Dave Jarvis

  What audio cards would you recommend that eliminate hum, and hard-drive & mouse movement signal interference? Hardware components: Motherboard. Asus P5Q SE Audio. Realtek ALC 1200, 8-Channel High-Definition Audio CODEC (on board) Harddrive. WD Caviar 320 GB Mouse. Logitech Marbleman USB Mixer. Mackie d.4 Pro Amplifier. Sonance Sonamp 260 All components are plugged into the same Monster Power HDP 910 powerbar (does not help eliminate noise). I have no other components plugged in. The computer uses a Monster iCable 1000 to go from mini (on board audio) to RCA (mixer). I have moved the cable as far from other cables as possible. A ground loop isolator between the mixer and on board audio eliminates all noise. I would rather not use a ground loop isolator; an internal audio card that is Linux-compatible (Kubuntu) would be ideal. Suggestions?

  Read the article

• Exchange 2010 Mail Enabled Public Folder Unable to Recieve External (anon) e-mail.

  - by Alex

  Hello All, I am having issues with my "Public Folders" mail enabled folders receiving e-mails from external senders. The folder is setup with three Accepted Domains (names changed for privacy reasons): 1 - domain1.com (primary & Authoritative) 2 - domain2.com (Authoritative) 3 - domain3.com (Authoritative) When someone attempts to send an e-mail to [email protected] from inside the organization, the e-mail is received and placed in the appropriate folder. However, when someone tries to send an e-mail from outside the organization (such as a gmail account), the following error message is received: "Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 Recipient address rejected: User unknown (state 14)." When I try to send an e-mail to the same folder, using the same e-mail address above ([email protected]), but with domain2.com instead of domain3.com, it works as intended (both internal & external). I have checked, double checked, and triple checked my DNS settings comparing those from domain2 & domain3 with them both appearing identical. I have tried recreating the folders in question with the same results. I have also ran Get-PublicFolderClientPermission "\Web Programs\folder" with the following results for user anonymous: RunspaceId : 5ff99653-a8c3-4619-8eeb-abc723dc908b Identity : \Web Programs\folder User : Anonymous AccessRights : {CreateItems} Domain2.com & Domain3.com are duplicates of each other, but only domain2.com works as intended. All other exchange functions are functioning properly. If anyone out there has any suggestions, I would love to hear them. I've just hit a brick wall. Thanks for all your help in advance! --Alex

  Read the article

• Temporary boot problem after thunder storm - likely causes?

  - by alastairs

  The village where I live was sat under a thunder cloud for most of Friday, and we suffered a few power fluctuations (specifically, what seemed to be split-second outages). When I got back home from work, I found that my PCs had shut down during one of these outages. When I went to boot one of them back up, I couldn't get anything to display on screen, nor did the boot seem to complete correctly. I tried a number of things - unplugging different bits of hardware, swapping graphics adaptors, etc. - to no avail. I thought I was looking at a fried motherboard or CPU. Power seemed to be distributed correctly to the peripherals (the drives all appeared to be working) so I figured it couldn't be the PSU. Eventually I unplugged it from the mains and left it overnight (approx 12hrs unplugged). I tried it again this morning, and it booted up correctly. Woo-hoo! I have all my equipment protected by surge-protected power strips, so I don't think a spike caused these problems. Obviously it has something to do with the power fluctuations, and maybe the PSU in the problem machine got itself confused somehow. The questions are, for future reference and to help people with similar problems: What are the likely causes of the boot failure I experienced? Is a UPS a simple and cost-effective solution, or might other things help prevent this happening in future? What UPS can you recommend (my budget is limited)?

  Read the article

• SSH client and Command Prompt replacements Windows look-and-feel

  - by Oddthinking

  The Problem I've worked exclusively in Windows. I can handle that. I've worked exclusively in DOS (a long time ago!). I can handle that. I've worked exclusively in Unix. I can handle that. Right now, I am developing a command-line (python) application on a Windows machine, testing it in a DOS box (i.e. Windows' Command prompt), and then deploying it to Linux, and running it with PuTTY. I cannot handle that. My productivity drops dramatically when CTRL-C cuts in one window (Windows) and kills the process in another (DOS, Linux). My productivity drops dramatically when Enter copies the selection in one window (DOS), and deletes the selection in another (Windows), and runs the current half-edited command in the third (PuTTY). My productivity drops dramatically when I cannot hit Undo, Home or End. The Solution I am Seeking An SSH/Bash command-line client that runs on Windows and, to the extent possible, uses all the standard Windows shortcuts (Cut, Copy, Paste, Undo, Home, End, Insert, Shift-Arrows, etc.) work on a bash command line. Bonus points if it puts the cursor between letters, rather than on them. Plus, an equivalent DOS command-line drop-in that runs on Windows, and provides the same interface. I appreciate there may need to be special buttons to actually transfer CTRL codes (like CTRL-C) through in the cases I need them. I suspect the SSH client will need to be specific to a shell (so it knows when it is at the command prompt, and when it is inside a running app.) I know there are many SSH clients, but I am looking for advice for a particular need. PuTTY feels like an escape route for Unix programmers stuck on Windows. I am the opposite. Can anyone recommend one (or maybe a combination of an SSH client and an Command-Line replacement)?

  Read the article

• How do I determine whether this email bounce is my fault?

  - by David Zaslavsky

  I use Google Apps to handle email for my personal website, so I have an email address [email protected] through that, and I also have a Gmail account [email protected]. Now, I've been trying to send emails to a particular recipient who shall be known as [email protected]. When I send the email from my Gmail account with the @gmail.com address, it works fine. However, when I send it from my Google Apps account with the @ellipsix.net address, I get a bounce message which includes the following text: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 mail server permanently rejected message (#5.3.0) (state 17). The bounce message suggests that it is up to the mail administrator of the recipient domain example.com to fix the problem, whatever it is. But I would like to be as sure as possible that nothing needs to be fixed on my end. I already have DKIM signatures enabled for my domain, and I have published an SPF DNS record. Is there something else I should check or do, or can I be confident that it's up to the recipient to fix this issue? Does the "state 17" in the bounce message mean something relevant? I've included my domain name in the question so people who know more than me about this stuff can independently check the relevant DNS records or other information. This other question seems similar, but I've already investigated everything suggested in the answers there (except for contacting Google, which I don't want to do unless I suspect it's their issue to fix).

  Read the article

• Cisco QoS Guidence

  - by Kyle Brandt

  I have a 10M connection to the internet that is hooked into a 100M port. I am getting started with QoS, and am hopping for a little guidance on setting it up on a Cisco 3825 router. Right now I am going forward with the idea that I have to implement it on my router, and the provider can't provide QoS for me. How I envision it working is that the QoS will drop or queue packets on my router and that will help prevent a situation where the provider has to start dropping a lot of packets. Right now all I am tasked with is making sure that one of the 3 LANs gets a certain slice (say 3M for Gig Lan1) of the 10M internet connection (But ideally this will be more flexible in the Future). 10M Internet on 100M port on HWIC-4ESW +-----------------------+ | | Gig Lan1 | Cisco 3825 | Lan3 on HWIC-4ESW | | +-----------------------+ Gig Lan2 I need to learn more about QoS, but having a target technology and maybe example configuration will help me wrap my head around the reading I am doing a little more. Which Cisco QoS Technology do you recommend for this particular situation? Have a basic sample config of how this might work? Right now the 10M line is not congested, so this more to have something in place in case it starts to become mildly congested in the future.

  Read the article

• Dedicated server with a lot of storage and good support - and cost-effective

  - by Martin Burger

  Hello, I am from Germany and looking for a dedicated server located in the US with a lot of storage: 750 - 1500 GB. CPU speed and amount of memory are secondary, the server will host large amounts of media files via http and ftp - the basic task is to help people exchange media files. In Germany, there are some good offers, like "Root Server EQ6" at www.hetzner.de. For example, that company provides support of high quality, and their plans are very cost-effective. The plan mentioned above costs about $90 per month and provides two 1500 GB SATA-II HDDs (Software-RAID 1). In the US, I found (amongst others) Go Daddy and rackspace. Go Daddy offers some "Storage Monster" plans that include 2 x 1,000 GB hard drives for about $180 per month - already twice as much as Hetzner above. However, I found some blog and forum entries that complain about the support provided by Go Daddy. Rackspace seems to provide decent support, but they are very "upscale". Their dedicated servers are customizable and start at $419 - thus, about 4.5 times as much as Hetzner. Can anybody recommend a solution / plan that is comparable to the one by Hetzner? Or are prices for dedicated servers in general much higher than in Germany? Regards, Martin

  Read the article

• Current wisdom on SQL Server and Hyperthreading?

  - by BradC

  Lots of articles out there (see Slava Oks's original SQL 2000 article and Kevin Kline's SQL 2005 update) recommend disabling hyperthreading on SQL servers, or at least testing your specific workload before enabling it on your servers. This issue is gradually becoming less relevant as true multi-core processors replace hyperthreaded ones, but what's the current wisdom on this issue? Does this advice change any with SQL 2005 64-bit, or SQL 2008, or Windows Server 2008? Ideally, this should be tested in advance in a staging environment, but what about for servers that have already made it into production with HT enabled? How can I tell if performance issues we're experiencing might be related to HT? Is there some specific combination of perfmon counters that might point me in that direction, as opposed to all the other things I normally pursue when working on improving SQL performance? Edit: This is especially attractive because of the potential for an across the board improvement for some of my high-cpu servers, but the client is going to want to see something concrete that helps me identify which servers really could benefit from disabling hyperthreading. Of course, conventional performance troubleshooting is ongoing, but sometimes any little bit helps.

  Read the article

• Email bouncing sent from Google

  - by davidmck

  I'm hoping someone here has an idea of where to look next. We have a domain we support which has email sent to it from one particular user bounce with the following message: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 Unrouteable address (state 14). We only have reports of bouncing form this one particular user (who is someone we don't support - except they'd like to be able to contact our customer and we're trying to figure out if the problem is on our end). Many people can successfully send to this domain and the user who is getting bounce messages can send to other domains that we support (so it's clearly something specific with the princetonscoop.com domain and not our setup in general). I've reviewed the MX records multiple times and the server logs don't show a connection which generates this error (in fact this error is not one that our mail server would ever return). So it appears that google is contacting a different mail server for some reason. I have tested sending from my gmail account and that works. I believe the sender is using a google-apps account (the account they are using is from their own domain, not a gmail account). Any ideas on what might be happening here or what to test/investigate next? Thanks.

  Read the article

• What are best practices on virtual lab/test bed architecture?

  - by WooYek

  I am currently preparing a new small virtual environment for development and testing with Windows Server + SQL Server + AD + Sharepoint + Exchange + IIS(ASP.NET) + Biztalk + ?, for a small (up to 5) dev team. What are pros and cons on different approaches, eg. splitting up over different machines or packing everything up per machine. I your experience what are the best practices I should follow in terms of architecture and various system/servers placement. What to share and what to split per person. I would like to achieve some flexibility for the dev and testing process (so teammebers would not be steeping on each other's toes) and limit administrative effort needed to propagate settings, integrate work items and revert changes when something breaks up. It's not supposed to be an everyday development working environment, more a tier 2 developer testing environment, and not yet an integration or QA testing environment with formal change process. IMO the two borderline solutions are: creating one all-inclusive machine for each dev team member giving them freedom to manage creating shared environment managed by the one with somehow formalized change request process What golden mean would you recommend, and why?

  Read the article

• Which ports are needed for NTLM (Windows Authentication) to connect to SQL Server?

  - by Adam Bellaire

  I've got SQL server running on a machine which is not in a domain, and which is not operating in mixed mode (it's running with "Windows Authentication"). I'm trying to connect to it from a Linux web server running freetds via TCP/IP, using NTLM to authenticate. The firewall on the SQL server is very restrictive. 1433 is open to my web server, but I'm getting conflicting information from the web on what additional ports (TCP/UDP) are needed for NTLM to succeed. It is currently fail; I can talk on 1433 to request NTLM, but the actual authentication always fails. One source says 137, 138, 139, but those are just the NetBIOS ports. Do I really need those? Another source says 135. Still others seem to say 1434... I can't make heads or tails of it. Dammit Jim, I'm a programmer, not a network administrator! EDIT: The exact error message: Msg 18452, Level 14, State 1, Server , Line 0 Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Msg 20002, Level 9, State -1, Server OpenClient, Line -1 Adaptive Server connection failed I am attempting to connect with a remote machine username, i.e. 'servername\username'. Some sources recommend that I set up mirrored accounts on the local and remote machines, but the local machine is running Linux, not IIS under Windows.

  Read the article

• Is there any special way to force GoBack to work with Windows Vista and 7?

  - by dfree

  Norton/Roxio's GoBack doesn't work with Vista/7 for reasons unknown. I have tried several alternatives (Norton Ghost, RollbackRX, Norton Save and Restore), none of which offer the same functionality as GoBack. Not only does GoBack not eat up all your hard drive space while creating a legitimate fail safe for any pc problems, it also allows you to see ACTIVELY EXACTLY WHAT PROCESS ARE BEING EXECUTED ON YOUR COMPUTER. This feature (called Advanced Disk Drive Restore) also allows you to troubleshoot problems and determine causes for things in about half a second by seeing what is happening on your machine. It's how I learned everything I know about computers. GoBack also features something called Safe Try Mode where you can put it in SafeTry and then mess up the whole computer and when you come out of it, your computer will be exactly how it was before. Amazing for people who like to tinker without risking their machine stability. It also helps for that accidentally erased paper or whatever you may have erased. I believe GoBack installs a type44 partition around the drive, which loads prior to windows to allow this functionality. If you're going to recommend another program, please don't (unless it does all of the above). I've tried all the competition and nothing is as good. I just want my GoBack to work with 7 :) Any ideas of crazy ways to make this work?

  Read the article

• A tiered approach to cloning linux partitons

  - by Djurdjura

  I'm looking at a strategy for cloning Linux (root) partitions without having to use a Live CD. Literature suggests rightly that the source and target partitions must be umounted to be able to get a clean clone. This assumes that you need to use a LiveCD. I was wondering if instead of requiring a LiveCD, if using a 3rd partition that would emulate the LiveCD functionality, if we can't achieve the same functionality. In other words, at a high level a system with 3 partitions (all bootable): Rescue Partition (LiveCD emulation) Running Partition (Source) Backup Partition (Destination) All 3 partitions are LVMS. When it's time to clone the source partition to the backup (destination) partition, we would boot to the rescue partition, unmount the other 2 partitions (is it required?), run disk check on the source, copy to the destination (dd or simple copy to avoid replicating the defragmentation from the source), run disk check on the destination partition, update Grub menu list to force boot from either partition, and reboot into that partition. My question, is it an approach that you'd recommend? MBR in all this? Any gotchas or extra checks required? Thanks, D. PS. On recommendation from members, posting here instead of stackoverflow.com.

  Read the article

• An easily customizable linux distribution using minimal disk space?

  - by Frank

  I'm looking for a linux distribution that can be easily used to create my own distribution that's the same system with some software installed. So basically I should be able to create an iso which, when installed, will have the linux distribution with my desired installed. More specifically, I plan on installing mysql and a bit of my own software which shouldn't be too big. However, this distribution needs to be extremely small in terms of disk space. The distribution, including mysql should not exceed 100mb. It should, of course still be able to connect to the internet and perform other standard functions. I don't need X/any sort of window manager, and would prefer not to have it since it would increase disk usage. Currently I have tried ttylinux and tiny core linux. I've found that ttylinux, while is extremely small, has almost nothing so that mysql can't even be installed. Tiny core linux, on the other hand is a bit too big. I've found openembedded and linux from scratch, but I would prefer for the install and build process to be much easier. What other distribution would you recommend for my purposes? Minimizing disk usage is the most important, followed by ease of installing and creating the custom distribution.

  Read the article

• CMS/Wiki to use for a HTML5 video site

  - by Clinton Blackmore

  Greetings. I want to put up a website with instructive screencasts, and allow for people to add comments to them. I would like use the Video for Everybody technique, partly because I dislike Flash and because it helps in a small way to move the web forward [while being backwards compatable]. I recognize that HTML5 is still in draft, and that support for it varies. I do have some hosting space, and can run Perl, PHP, and Ruby on Rails applications, with a MySQL backend. I should mention that part of my working job involves running some web servers, and that I am a programmer by training (with only a limited familiarity with Perl and PHP, and none with Ruby). I should mention why I don't particularly want to go with a video hosting site (like YouTube or Vimeo): Flash Video Resolution and Quality [I'd like to put up 800x600 videos] Videos promote a club that is not stricly non-profit [ie. may fall afoul of Terms of Service] I'm already paying for web hosting, and free video hosting comes with time and bandwidth limits I don't want there to be two locations where you can comment on the video Now, having said all that, I'd be quite comfortable putting up my own HTML pages, except: that's so web 1.0! :) [ie. it does not allow for comments] I also want to do some blogging and possibly put up a wiki; the site will not be entirely screencasts So, can anyone recommend a CMS (or Wiki, or similar application) that I can customise for this purpose?

  Read the article

• Need Suggestions on Backup Strategies and Alternatives?

  - by Leejo

  I'm not sure where else to post this question since it is not exactly Code or Development related...but I know Stackoverflow is a very responsive to questions... Currently, I use Mozy Home to perform an online backup of my laptop. So far, this works well, since I only use one laptop that needs to be backed up. But, soon this may change and I want to explore other alternatives than having to perform an online backup on all machines. Ideally, I want to set up a Network Computer (Laptop/Desktop) with enough storage to hold the backups for all other machines that I would have. Each machine should be responsible for performing their backup (to the Network Computer). This would require some capability like Mozy's incremental backup strategy, but instead of online backup, I would prefer it to be done locally to the Network Computer. Can you recommend a local backup software (backup to a network pc, incremental backup, good restore options)? I'm also looking for any ideas on a local backup strategy even if its different from what I've stated? What works and what doesn't work? Thanks in advance for your help!

  Read the article

• undelete big files - mission impossible?

  - by johnrembo

  Hi, I've accidentaly deleted outlook.pst (6.7GB) file, while there was only 400MB free space left on primary NTFS partition (winxp). I've tried several recovery tools to get this file back. "Ontrack Easy Recovery Pro" found 0 pst files (complete scan mode), while "Recover My Files" in sector scan mode found 5 pst's, but 4 of them of sizes from 3 to 28 KB, while the 5th one - 1Gb. I've managed to succesfuly recover 1Gb pst file, which was 1 year old copy (the one used after the latest windows reinstall). Now, I'm frustrated and confused Why 1 year old file was succesfuly recovered if there were only 400MB left on primary partition? Where's 6.7GB file gone? I did some reading (i.e. here), and it seems that there's almost no probability to retrieve the file I'm looking for, but wait - none of recovery tools i've used found zero-sized pst file, moreover - if due to fragmentation a file might be corrupted - we could use scanpst.exe to fix some errors and survive with 10 or 100 emails missing - whatever. Could you please recommend some more sophisticated recovery tools for this particular task? Appretiate your help - thanks in advance

  Read the article

• Software Diagnostics Tool recommendations for Debugging a Windows 8 freeze

  - by Stuart

  I've had my HP Pavillion dv6 laptop since last November - and it has had 8GB RAM and a 256GB Crucial M4 SSD installed since the start. I use it for software development and it's had a Windows 8 RTM installation since early September. Yesterday I had to give a presentation at a customer site - so used Powerpoint for the first time since installing Win8... since that point my machine has 'frozen' every 2 hours or so after startup. There doesn't seem to be any easy to see reason behind the freeze - the system just freezes, even if I have left it idle with just a desktop there. My immediate suspicion is that the SSD is the mostly likely cause of the problem. I've looked at some of the questions on here - e.g. How do I troubleshoot hardware issues related to a computer freeze/crash? - but don't really want to start taking my laptop apart. Another suspicion is that this might be related to the WiFi adapter (Broadcom 802.11n) since I have noticed that this doesn't seem to play perfectly with things like Hyper-V in Win8. Can anyone recommend any software diagnostic tools that I can run in order to evaluate the health of the SSD or of other parts of the system? Thanks Stuart P.S. I doubt Powerpoint is the cause of this, but I may use it as an excuse never to use it again... More realistically perhaps something got damaged during travel to the customer site?

  Read the article

• Architecture for highly available MySQL with automatic failover in physically diverse locations

  - by Warner

  I have been researching high availability (HA) solutions for MySQL between data centers. For servers located in the same physical environment, I have preferred dual master with heartbeat (floating VIP) using an active passive approach. The heartbeat is over both a serial connection as well as an ethernet connection. Ultimately, my goal is to maintain this same level of availability but between data centers. I want to dynamically failover between both data centers without manual intervention and still maintain data integrity. There would be BGP on top. Web clusters in both locations, which would have the potential to route to the databases between both sides. If the Internet connection went down on site 1, clients would route through site 2, to the Web cluster, and then to the database in site 1 if the link between both sites is still up. With this scenario, due to the lack of physical link (serial) there is a more likely chance of split brain. If the WAN went down between both sites, the VIP would end up on both sites, where a variety of unpleasant scenarios could introduce desync. Another potential issue I see is difficulty scaling this infrastructure to a third data center in the future. The network layer is not a focus. The architecture is flexible at this stage. Again, my focus is a solution for maintaining data integrity as well as automatic failover with the MySQL databases. I would likely design the rest around this. Can you recommend a proven solution for MySQL HA between two physically diverse sites? Thank you for taking the time to read this. I look forward to reading your recommendations.

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >