Search Results

Search found 9101 results on 365 pages for 'sub arrays'.

Page 124/365 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Creating Persistent Drive Labels With UDEV Using /dev/disk/by-path

  - by Matt

  I have a new BackBlaze Pod (BackBlaze Pod 2.0). It has 45 3TB drives and they when I first set it up they were labeled /dev/sda through /dev/sdz and /dev/sdaa through /dev/sdas. I used mdadm to setup three really big 15 drive RAID6 arrays. However, since first setup a few weeks ago I had a couple of the hard drives fail on me. I've replaced them but now the arrays are complaining because they can't find the missing drives. When I list the the disks... ls -l /dev/sd* I see that /dev/sda /dev/sdf /dev/sdk /dev/sdp no longer appear and now there are 4 new ones... /dev/sdau /dev/sdav /dev/sdaw /dev/sdax I also just found that I can do this... ls -l /dev/disk/by-path/ total 0 lrwxrwxrwx 1 root root 10 Sep 19 18:08 pci-0000:02:04.0-scsi-0:0:0:0 -> ../../sdau lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-0:1:0:0 -> ../../sdb lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-0:2:0:0 -> ../../sdc lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-0:3:0:0 -> ../../sdd lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-0:4:0:0 -> ../../sde lrwxrwxrwx 1 root root 10 Sep 19 18:08 pci-0000:02:04.0-scsi-2:0:0:0 -> ../../sdae lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-2:1:0:0 -> ../../sdg lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-2:2:0:0 -> ../../sdh lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-2:3:0:0 -> ../../sdi lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-2:4:0:0 -> ../../sdj lrwxrwxrwx 1 root root 10 Sep 19 18:08 pci-0000:02:04.0-scsi-3:0:0:0 -> ../../sdav lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-3:1:0:0 -> ../../sdl lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-3:2:0:0 -> ../../sdm lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-3:3:0:0 -> ../../sdn lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:02:04.0-scsi-3:4:0:0 -> ../../sdo lrwxrwxrwx 1 root root 10 Sep 19 18:08 pci-0000:04:04.0-scsi-0:0:0:0 -> ../../sdax lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:04:04.0-scsi-0:1:0:0 -> ../../sdq lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:04:04.0-scsi-0:2:0:0 -> ../../sdr lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:04:04.0-scsi-0:3:0:0 -> ../../sds lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:04:04.0-scsi-0:4:0:0 -> ../../sdt lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:04:04.0-scsi-2:0:0:0 -> ../../sdu lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:04:04.0-scsi-2:1:0:0 -> ../../sdv lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:04:04.0-scsi-2:2:0:0 -> ../../sdw lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:04:04.0-scsi-2:3:0:0 -> ../../sdx lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:04:04.0-scsi-2:4:0:0 -> ../../sdy lrwxrwxrwx 1 root root 9 Sep 19 18:08 pci-0000:04:04.0-scsi-3:0:0:0 -> ../../sdz I didn't list them all....you can see the problem above. They're sorted by scsi id here but sda is missing...replaced by sdau...etc... So obviously the arrays are complaining. Is it possible to get Linux to reread the drive labels in the correct order or am I screwed? My initial design with 15 drive arrays is not ideal. With 3TB drives the rebuild times were taking 3 or 4 days....maybe more. I'm scrapping the whole design and I think I am going to go with 6 x 7 RAID5 disk arrays and 3 hot spares to make the arrays a bit easier to manage and shorten the rebuild times. But I'd like to clean up the drive labels so they aren't out of order. I haven't figured out how to do this yet. Does anyone know how to get this straightened out? Thanks, Matt

  Read the article

• "Verifying DMI Pool" hang caused by raid array..

  - by Ling

  Hi Experts, I have a problem, I obtained a new server with 4 hard drives (2 500 gig, 2 two TB), and an adeptec RAID card. I arranged them in two arrays with RAID 1 (500 gigs together as primary and the 2 TB drives for lots of data). When both arrays are configured, the server hangs while booting at message "Verifying DMI Pool", however if I remove the second array from the configuration the server boots fine. I have checked they are both on different channels, I have disabled all other peripherals from the boot menu and ensured the hard drive is #1. I have booted into the linux rescue mode and checked that it is reading both arrays fine. What else could be causing these problems? Thanks

  Read the article

• Nginx - Redirect any Subdomain to File without Rewriting

  - by Waffle

  Recently I have switched from Apache to Nginx to increase performance on a web server running Ubuntu 11.10. I have been having issues trying to figure out how certain things work in Nginx compared to Apache, but one issue has been stumping me and I have not been able to find the answer online. My problem is that I need to be able to redirect (not rewrite) any sub-domain to a file, but that file needs to be able to get the sub-domain part of the URL in order to do a database look-up of that sub-domain. So far, I have been able to get any sub-domain to rewrite to that file, but then it loses the text of the sub-domain I need. So, for example, I would like test.server.com to redirect to server.com/resolve.php, but still remain as test.server.com. If this is not possible, the thing that I would need at the very least would be something such as going to test.server.com would go to server.com/resolve.php?=test . One of these options must be possible in Nginx. My config as it stands right now looks something like this: server { listen 80; ## listen for ipv4; this line is default and implied listen [::]:80 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name www.server.com server.com; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ /index.html; } location /doc { root /usr/share; autoindex on; allow 127.0.0.1; } location /images { root /usr/share; autoindex off; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } server { listen 80 default; server_name *.server.com; rewrite ^ http://www.server.com/resolve.php; } As I said before, I am very new to Nginx, so I have a feeling the answer is pretty simple, but no examples online seem to deal with just redirects without rewrites or rewriting with the sub-domain section included. Any help on what to do would be most appreciated and if any one has a better idea to accomplish what I need, I am also open to ideas. Thank you very much.

  Read the article

• How do you automap List<float> or float[] with Fluent NHibernate?

  - by Tom Bushell

  Having successfully gotten a sample program working, I'm now starting to do Real Work with Fluent NHibernate - trying to use Automapping on my project's class heirarchy. It's a scientific instrumentation application, and the classes I'm mapping have several properties that are arrays of floats e.g. private float[] _rawY; public virtual float[] RawY { get { return _rawY; } set { _rawY = value; } } These arrays can contain a maximum of 500 values. I didn't expect Automapping to work on arrays, but tried it anyway, with some success at first. Each array was auto mapped to a BLOB (using SQLite), which seemed like a viable solution. The first problem came when I tried to call SaveOrUpdate on the objects containing the arrays - I got "No persister for float[]" exceptions. So my next thought was to convert all my arrays into ILists e.g. public virtual IList<float> RawY { get; set; } But now I get: NHibernate.MappingException: Association references unmapped class: System.Single Since Automapping can deal with lists of complex objects, it never occured to me it would not be able to map lists of basic types. But after doing some Googling for a solution, this seems to be the case. Some people seem to have solved the problem, but the sample code I saw requires more knowledge of NHibernate than I have right now - I didn't understand it. Questions: 1. How can I make this work with Automapping? 2. Also, is it better to use arrays or lists for this application? I can modify my app to use either if necessary (though I prefer lists). Edit: I've studied the code in Mapping Collection of Strings, and I see there is test code in the source that sets up an IList of strings, e.g. public virtual IList<string> ListOfSimpleChildren { get; set; } [Test] public void CanSetAsElement() { new MappingTester<OneToManyTarget>() .ForMapping(m => m.HasMany(x => x.ListOfSimpleChildren).Element("columnName")) .Element("class/bag/element").Exists(); } so this must be possible using pure Automapping, but I've had zero luck getting anything to work, probably because I don't have the requisite knowlege of manually mapping with NHibernate. Starting to think I'm going to have to hack this (by encoding the array of floats as a single string, or creating a class that contains a single float which I then aggregate into my lists), unless someone can tell me how to do it properly. End Edit Here's my CreateSessionFactory method, if that helps formulate a reply... private static ISessionFactory CreateSessionFactory() { ISessionFactory sessionFactory = null; const string autoMapExportDir = "AutoMapExport"; if( !Directory.Exists(autoMapExportDir) ) Directory.CreateDirectory(autoMapExportDir); try { var autoPersistenceModel = AutoMap.AssemblyOf<DlsAppOverlordExportRunData>() .Where(t => t.Namespace == "DlsAppAutomapped") .Conventions.Add( DefaultCascade.All() ) ; sessionFactory = Fluently.Configure() .Database(SQLiteConfiguration.Standard .UsingFile(DbFile) .ShowSql() ) .Mappings(m => m.AutoMappings.Add(autoPersistenceModel) .ExportTo(autoMapExportDir) ) .ExposeConfiguration(BuildSchema) .BuildSessionFactory() ; } catch (Exception e) { Debug.WriteLine(e); } return sessionFactory; }

  Read the article

• search a collection for a specific keyword

  - by icelated

  What i want to do is search a hashset with a keyword.. I have 3 classes... main() Library Item(CD, DVD,Book classes) In library i am trying to do my search of the items in the hashsets.. In Item class is where i have the getKeywords function.. here is the Items class... import java.io.PrintStream; import java.util.Collection; import java.util.*; class Item { private String title; private String [] keywords; public String toString() { String line1 = "title: " + title + "\n" + "keywords: " + Arrays.toString(keywords); return line1; } public void print() { System.out.println(toString()); } public Item() { } public Item(String theTitle, String... theKeyword) { this.title = theTitle; this.keywords = theKeyword; } public String getTitle() { return title; } public String [] getKeywords() { return keywords; } } class CD extends Item { private String artist; private String [] members; // private String [] keywords; private int number; public CD(String theTitle, String theBand, int Snumber, String... keywords) { super(theTitle, keywords); this.artist = theBand; this.number = Snumber; // this.keywords = keywords; } public void addband(String... member) { this.members = member; } public String getArtist() { return artist; } public String [] getMembers() { return members; } // public String [] getKeywords() // { // return keywords; //} public String toString() { return "-Music-" + "\n" + "band: " + artist + "\n" + "# songs: " + number + "\n" + "members: " + Arrays.toString(members) + "\n" + super.toString() // + "keywords: " + Arrays.toString(keywords) + "\n" + "\n" ; } public void print() { System.out.println(toString()); } } class DVD extends Item { private String director; private String [] cast; private int scenes; // private String [] keywords; public DVD(String theTitle, String theDirector, int nScenes, String... keywords) { super(theTitle, keywords); this.director = theDirector; this.scenes = nScenes; // this.keywords = keywords; } public void addmoviecast(String... members) { this.cast = members; } public String [] getCast() { return cast; } public String getDirector() { return director; } // public String [] getKeywords() // { // return keywords; // } public String toString() { return "-Movie-" + "\n" + "director: " + director + "\n" + "# scenes: " + scenes + "\n" + "cast: " + Arrays.toString(cast) + "\n" + super.toString() // + "keywords: " + Arrays.toString(keywords) + "\n" + "\n" ; } public void print() { System.out.println(toString()); } } class Book extends Item { private String author; private int pages; public Book(String theTitle, String theAuthor, int nPages, String... keywords) { super(theTitle, keywords); this.author = theAuthor; this.pages = nPages; // this.keywords = keywords; } public String getAuthor() { return author; } //public String [] getKeywords() // { // return keywords; //} public void print() { System.out.println(toString()); } public String toString() { return "-Book-" + "\n" + "Author: " + author + "\n" + "# pages " + pages + "\n" + super.toString() // + "keywords: " + Arrays.toString(keywords) + "\n" + "\n" ; } } I hope i didnt confuse you? I need help with the itemsForKeyword(String keyword) function.. the first keyword being passed in is "science fiction" and i want to search the keywords in the sets and return the matches.. What am i doing so wrong? Thank you

  Read the article

• Constructing a Binary Tree from its traversals

  - by user991710

  I'm trying to construct a binary tree (unbalanced), given its traversals. I'm currently doing preorder + inorder but when I figure this out postorder will be no issue at all. I realize there are some question on the topic already but none of them seemed to answer my question. I've got a recursive method that takes the Preorder and the Inorder of a binary tree to reconstruct it, but is for some reason failing to link the root node with the subsequent children. Note: I don't want a solution. I've been trying to figure this out for a few hours now and even jotted down the recursion on paper and everything seems fine... so I must be missing something subtle. Here's the code: public static <T> BinaryNode<T> prePlusIn( T[] pre, T[] in) { if(pre.length != in.length) throw new IllegalArgumentException(); BinaryNode<T> base = new BinaryNode(); base.element = pre[0]; // * Get root from the preorder traversal. int indexOfRoot = 0; if(pre.length == 0 && in.length == 0) return null; if(pre.length == 1 && in.length == 1 && pre[0].equals(in[0])) return base; // * If both arrays are of size 1, element is a leaf. for(int i = 0; i < in.length -1; i++){ if(in[i].equals(base.element)){ // * Get the index of the root indexOfRoot = i; // in the inorder traversal. break; } // * If we cannot, the tree cannot be constructed as the traversals differ. else throw new IllegalArgumentException(); } // * Now, we recursively set the left and right subtrees of // the above "base" root node to whatever the new preorder // and inorder traversals end up constructing. T[] preleft = Arrays.copyOfRange(pre, 1, indexOfRoot + 1); T[] preright = Arrays.copyOfRange(pre, indexOfRoot + 1, pre.length); T[] inleft = Arrays.copyOfRange(in, 0, indexOfRoot); T[] inright = Arrays.copyOfRange(in, indexOfRoot + 1, in.length); base.left = prePlusIn( preleft, inleft); // * Construct left subtree. base.right = prePlusIn( preright, inright); // * Construc right subtree. return base; // * Return fully constructed tree } Basically, I construct additional arrays that house the pre- and inorder traversals of the left and right subtree (this seems terribly inefficient but I could not think of a better way with no helpers methods). Any ideas would be quite appreciated. Side note: While debugging it seems that the root note never receives the connections to the additional nodes (they remain null). From what I can see though, that should not happen... EDIT: To clarify, the method is throwing the IllegalArgumentException @ line 21 (else branch of the for loop, which should only be thrown if the traversals contain different elements.

  Read the article

• Rotating a view of a chunked 2d tilemap

  - by Danie Clawson

  I'm working on a top-down (oblique) tile-based engine. I would like for the tiles to have a definable height in the world, with Characters being occluded by them, etc. This has led to a desire to be able to "rotate" the view of the world, even though I'm using all hand-drawn graphics and blitting. Therefor, I need to rotate the actual world itself, or change how the Camera traverses these arrays. How can, or should, I create individual rotations of 90 degrees, when I have multi-dimensional arrays? Is it faster to actually rotate the array, to access it differently, or to create pre-computed accessor(?) arrays, something like how my chunks work? How can I rotate an individual chunk, or set of chunks? Currently I establish my tile grid like this (tile height not included): function Surface(WIDTH, HEIGHT) { WIDTH = Math.max(WIDTH-(WIDTH%TPC), TPC); HEIGHT = Math.max(HEIGHT-(HEIGHT%TPC), TPC); this.tiles = []; this.chunks = []; //Establish tiles for(var x = 0; x < WIDTH; x++) { var col = [], ch_x = Math.floor(x/TPC); if(!this.chunks[ch_x]) this.chunks.push([]); for(var y = 0; y < HEIGHT; y++) { var tile = new Tile(x, y), ch_y = Math.floor(y/TPC); if(!this.chunks[ch_x][ch_y]) this.chunks[ch_x].push([]); this.chunks[ch_x][ch_y].push(tile); col.push(tile); } this.tiles.push(col); } }; Even some basic advice on my data struct would be much appreciated.

  Read the article

• Creating properly aligned partitions on a replacement disk

  - by Marius Gedminas

  I've a typical small office server with two hard disks configured for RAID-1 (mirroring). Each disk has several partitions: one for swap, the others paired in several /dev/mdX arrays. Every couple of years one of the disks dies and is replaced. The replacement typically goes something like this: # copy partition table from the remaining good disk to the empty replacement disk # (instead of /dev/good_disk and /dev/new_disk I use /dev/sda and /dev/sdb, as appropriate) sfdisk -d /dev/good_disk | sfdisk /dev/new_disk # install boot loader grub-install /dev/new_disk # create swap partition reusing the same UUID, so I don't need to edit /etc/fstab mkswap /dev/new_disk1 -U xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx # hot-add the new partitions to my RAID arrays mdadm /dev/md0 -a /dev/new_disk2 mdadm /dev/md1 -a /dev/new_disk5 mdadm /dev/md2 -a /dev/new_disk6 mdadm /dev/md3 -a /dev/new_disk7 mdadm /dev/md4 -a /dev/new_disk8 The disks were originally partitioned with cfdisk back in 2009, and so the partition table is aligned traditionally to cylinder boundaries (255 heads * 63 sectors). This is not the optimum configuration for new 4K-sector drives. My question is: how can I create a set of partitions for the new disk and ensure they're properly aligned, and have correct sizes for my RAID arrays (rounding up is acceptable, I suppose, but rounding down is definitely not)?

  Read the article

• Space-efficient data structures for broad-phase collision detection

  - by Marian Ivanov

  As far as I know, these are three types of data structures that can be used for collision detection broadphase: Unsorted arrays: Check every object againist every object - O(n^2) time; O(log n) space. It's so slow, it's useless if n isn't really small. for (i=1;i<objects;i++){ for(j=0;j<i;j++) narrowPhase(i,j); }; Sorted arrays: Sort the objects, so that you get O(n^(2-1/k)) for k dimensions O(n^1.5) for 2d and O(n^1.67) for 3d and O(n) space. Assuming the space is 2D and sortedArray is sorted so that if the object begins in sortedArray[i] and another object ends at sortedArray[i-1]; they don't collide Heaps of stacks: Divide the objects between a heap of stacks, so that you only have to check the bucket, its children and its parents - O(n log n) time, but O(n^2) space. This is probably the most frequently used approach. Is there a way of having O(n log n) time with less space? When is it more efficient to use sorted arrays over heaps and vice versa?

  Read the article

• a flexible data structure for geometries

  - by AkiRoss

  What data structure would you use to represent meshes that are to be altered (e.g. adding or removing new faces, vertices and edges), and that have to be "studied" in different ways (e.g. finding all the triangles intersecting a certain ray, or finding all the triangles "visible" from a given point in the space)? I need to consider multiple aspects of the mesh: their geometry, their topology and spatial information. The meshes are rather big, say 500k triangles, so I am going to use the GPU when computations are heavy. I tried using arrays with vertices and arrays with indices, but I do not love adding and removing vertices from them. Also, using arrays totally ignore spatial and topological information, which I may need studying the mesh. So, I thought about using custom double-linked list data structures, but I believe doing so will require me to copy the data to array buffers before going on the GPU. I also thought about using BST, but not sure it fits. Any help is appreciated. If I have been too fuzzy and you require other information feel free to ask.

  Read the article

• Authenticating Apache HTTPd against multiple LDAP servers with expired accounts

  - by Brian Bassett

  We're using mod_authnz_ldap and mod_authn_alias in Apache 2.2.9 (as shipped in Debian 5.0, 2.2.9-10+lenny7) to authenticate against multiple Active Directory domains for hosting a Subversion repository. Our current configuration is: # Turn up logging LogLevel debug # Define authentication providers <AuthnProviderAlias ldap alpha> AuthLDAPBindDN "CN=Subversion,OU=Service Accounts,O=Alpha" AuthLDAPBindPassword [[REDACTED]] AuthLDAPURL ldap://dc01.alpha:3268/?sAMAccountName?sub? </AuthnProviderAlias> <AuthnProviderAlias ldap beta> AuthLDAPBindDN "CN=LDAPAuth,OU=Service Accounts,O=Beta" AuthLDAPBindPassword [[REDACTED]] AuthLDAPURL ldap://ldap.beta:3268/?sAMAccountName?sub? </AuthnProviderAlias> # Subversion Repository <Location /svn> DAV svn SVNPath /opt/svn/repo AuthName "Subversion" AuthType Basic AuthBasicProvider alpha beta AuthzLDAPAuthoritative off AuthzSVNAccessFile /opt/svn/authz require valid-user </Location> We're encountering issues with users that have accounts in both Alpha and Beta, especially when their accounts in Alpha are expired (but still present; company policy is that the accounts live on for at a minimum of 1 year). For example, when the user x (which has en expired account in Alpha, and a valid account in Beta), the Apache error log reports the following: [Tue May 11 13:42:07 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14817] auth_ldap authenticate: using URL ldap://dc01.alpha:3268/?sAMAccountName?sub? [Tue May 11 13:42:08 2010] [warn] [client 10.1.1.104] [14817] auth_ldap authenticate: user x authentication failed; URI /svn/ [ldap_simple_bind_s() to check user credentials failed][Invalid credentials] [Tue May 11 13:42:08 2010] [error] [client 10.1.1.104] user x: authentication failure for "/svn/": Password Mismatch [Tue May 11 13:42:08 2010] [debug] mod_deflate.c(615): [client 10.1.1.104] Zlib: Compressed 527 to 359 : URL /svn/ Attempting to authenticate as a non-existant user (nobodycool) results in the correct behavior of querying both LDAP servers: [Tue May 11 13:42:40 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14815] auth_ldap authenticate: using URL ldap://dc01.alpha:3268/?sAMAccountName?sub? [Tue May 11 13:42:40 2010] [warn] [client 10.1.1.104] [14815] auth_ldap authenticate: user nobodycool authentication failed; URI /svn/ [User not found][No such object] [Tue May 11 13:42:40 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14815] auth_ldap authenticate: using URL ldap://ldap.beta:3268/?sAMAccountName?sub? [Tue May 11 13:42:44 2010] [warn] [client 10.1.1.104] [14815] auth_ldap authenticate: user nobodycool authentication failed; URI /svn/ [User not found][No such object] [Tue May 11 13:42:44 2010] [error] [client 10.1.1.104] user nobodycool not found: /svn/ [Tue May 11 13:42:44 2010] [debug] mod_deflate.c(615): [client 10.1.1.104] Zlib: Compressed 527 to 359 : URL /svn/ How do I configure Apache to correctly query Beta if it encounters an expired account in Alpha?

  Read the article

• Bladecenter-E Power Module fault

  - by Lihnjo

  We have problem on IBM Bladecenter-E Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to support redundancy What is the best solution for this problem? Thanks AMM Service Data Help SPAPP Capture Available 10/13/2010 17:03:47 1090347 bytes Time: 11/19/2012 11:02:31 UUID: 42E1 5D2F D7BF 41A6 A4A2 48D1 3FB7 0540 MAC Address xx:xx:xx:xx:xx:xx MM Information Name: nnnnn Contact: aaa, bbb, ccc, England Location: [email protected] IP address: 111.222.333.444 Date Time Information GMT offset: +1:00 - Central Europe Time (Western Europe, Algeria, Nigeria, Angola) Adjust for DST: Yes NTP: Enabled NTP Hostname/IP: 111.222.333.444 System Health: Critical System Status Summary One or more monitored parameters are abnormal. Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to support redundancy CHASSIS (BladeCenter-E) in CHASSIS slot: 01 TopoPath is "CHASSIS[1]". Description : BladeCenter-E Width : 1 Sub Type : BladeCenter (BC) Power Mode : 220 v KVM Owner : CHASSIS[1]/BLADE[9] MT Owner : CHASSIS[1]/MGMT_MOD[1] Component Type : CHASSIS Inventory: VPD ID: 336 (decimal) POS ID EXT: 0 (decimal) POS ID: 8 (decimal) Machine Type/Model: 86773RG Machine Serial Number: 99ZL816 Part Number: 39R8561 FRU Number: 39R8563 FRU Serial Number: YK109174W1HV Manufacturer ID: IBM Hardware Revision: 3 (decimal) Manufacture Date: 18 (wk), 07 (yr) UUID: 42E1 5D2F D7BF 41A6 A4A2 48D1 3FB7 0540 (hex) Type Code: 97 (decimal) Sub-type Code: 0 (decimal) IANA Num: 336 (decimal) Product ID: 8 (decimal) Manufacturer Sub ID: FOXC Enviroment data: -------------- Type: : POWER_USAGE Unit: : WATTS Reading: : 0xa Sensor Label: : Midplane Sensor ID: : 0x0 MGMT MOD (Advanced Management Module) in MGMT_MOD slot: 01 TopoPath is "CHASSIS[1]/MGMT_MOD[1]". Description : Advanced Management Module Name : kant Width : 1 Component Role : Primary Component Type : MGMT MOD Insert Time : 28050132 Inventory: VPD ID: 288 (decimal) POS ID EXT: 0 (decimal) POS ID: 4 (decimal) Part Number: 39Y9659 FRU Number: 39Y9661 FRU Serial Number: YK11836CE2RC Manufacturer ID: IBM Hardware Revision: 4 (decimal) Manufacture Date: 50 (wk), 06 (yr) UUID: 1D95 9937 8CA5 11DB 9499 0014 5EDF 1C98 (hex) Type Code: 81 (decimal) Sub-type Code: 1 (decimal) IANA Num: 20301 (decimal) Product ID: 65 (decimal) Manufacturer Sub ID: ASUS Firmware data: Type : AMM firmware Build ID : BPET50P File Name : CNETCMUS.PKT Release Date : 03/26/2010 Release Level : 50 Revision - Major: 80 Port info: ======================================================== Topology Path ID : 1 Label : External Phy Orientation : EXTERNAL Port Number : 1 Type : MGT Physical Meidum : Copper Number of Link Intferfaces : 1 ------------------------------------ Link Ifc ID Number : 1 Link Ifc Transport Protocol : ENET Link Ifc Addr Type : MAC Link Ifc Burned-in Addr : xx:xx:xx:xx:xx:xx Link Ifc Admin Addr : 00:00:00:00:00:00 Link Ifc Addr in use : xx:xx:xx:xx:xx:xx ---------------------------------------------------------- Configuration behaviors: Save Only Enviroment data: -------------- Type: : TEMPERATURE Unit: : DEGREES_C Reading: : 38.00 Sensor Label: : MM Ambient Sensor ID: : 0x0 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +4.81 Sensor Label: : +5V Sensor ID: : 0x1b -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +3.26 Sensor Label: : +3.3V Sensor ID: : 0x19 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +11.97 Sensor Label: : +12V Sensor ID: : 0x16 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : -4.88 Sensor Label: : -5V Sensor ID: : 0x1e -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +2.47 Sensor Label: : +2.5V Sensor ID: : 0x18 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +1.76 Sensor Label: : +1.8V Sensor ID: : 0x15 -------------- Type: : POWER_USAGE Unit: : WATTS Reading: : 0x19 Sensor Label: : kant Sensor ID: : 0x0

  Read the article

• Win XP error 0x80041003 using GetObject/winmgmts

  - by John Lewis

  My computer is called "neil" and I want to set some values using WMI in vbScript. I adapetd the script below from one supplied by Microsoft. When I run it in my browser I get Error Type: (0x80041003) /dressage/30/pdf2.asp, line 8 I suspect it is some registry/security setting. Any advice? John Lewis FULL SCRIPT call Print_HTML_Page("http://neil/dressage/ascii.asp", "ascii") Sub SetPDFFile(strPDFFile) Const HKEY_LOCAL_MACHINE = &H80000002 strKeyPath = "SOFTWARE\Dane Prairie Systems\Win2PDF" strComputer = "." Set objReg=GetObject( _ "winmgmts:{impersonationLevel=impersonate}!\\" & _ strComputer & "\root\default:StdRegProv") strValueName = "PDFFileName" objReg.SetExpandedStringValue HKEY_LOCAL_MACHINE,_ strKeyPath,strValueName,strPDFFile End Sub Sub Print_HTML_Page(strPathToPage, strPDFFile) SetPDFFile( strPDFFile ) Set objIE = CreateObject("InternetExplorer.Application") 'From http://www.tek-tips.com/viewthread.cfm?qid=1092473&page=5 On Error Resume Next strPrintStatus = objIE.QueryStatusWB(6) If Err.Number 0 Then MsgBox "Cannot find a printer. Operation aborted." objIE.Quit Set objIE = Nothing Exit Sub End If With objIE .visible=0 .left=200 .top=200 .height=400 .width=400 .menubar=0 .toolbar=1 .statusBar=0 .navigate strPathToPage End With 'Wait until IE has finished loading Do while objIE.busy WScript.Sleep 100 Loop On Error Goto 0 objIE.ExecWB 6,2 'Wait until IE has finished printing WScript.Sleep 2000 objIE.Quit Set objIE = Nothing End Sub Update: Thanks for your reply. The line breaks seem to have been introduced in the process of paasting into this form. Well spotted - I was using a PDF file name "ascii". I added a .pdf extension but still get the error. I suspect you're right that it's to do with admin rights. Here's more about the setup and what I'm trying to achieve. Win2pdf is a product for writing PDFs by works by simulating a Windows printer. You "print" the page, select win2pdf in the print dialog and it then asks for a file name. I have it installed on my pc (called Neil) and it works fine in this conventional way. My aim is to write an html page to a PDF file using win2pdf - but via ASP/vbscript/javascript rather than with manual intervention. The script for doing this was provided by win2PDF's tech support but when it did not work, that was the limit of their understanding. In the sample script the file ascii.asp just produces a table of ascii codes/characters. The URL given is on my own PC which has IIS set up to run scripts which it does fine. The error I get occurs on about the fourth line executed. I am logged in with full admin rights - I think! But I'm no expert. I hope this helps to give some more specific suggestions about how to check/fix the admin rights.

  Read the article

• Generating/managing config files for hosted application

  - by mfinni

  I asked a question about config management, and haven't seen a reply. It's possible my question was too vague, so let's get down to brass tacks. Here's the process we follow when onboarding a new customer instance into our hosted application : how would you manage this? I'm leaning towards a Perl script to populate templates to generate shell scripts, config files, XML config files, etc. Looking briefly at CFengine and Chef, it seems like they're not going to reduce the amount of work, because I'd still have to manually specify all of the changes/edits within the tool. Doesn't seem to be much of a gain over touching the config files directly. We add a stanza to the main config file for the core (3rd-party) application. This stanza has values that defines the instance (customer) name the TCP listener port for this instance (not one currently used) the DB2 database name (serial numeric identifier, already exists, they get prestaged for us by the DBAs) three sub-config files, by name - they need to be created from 3 templates and be named after the instance The sub-config files define: The filepath for the DB2 volumes The filepath for the storage of objects The filepath for just one of the DB2 volumes (yes, redundant to the first item. We run some application commands, start the instance We do some LDAP thingies (make an OU for the instance, etc.) We add a stanza to the config file for our security listener that acts as a passthrough to LDAP instance name LDAP OU TCP port for instance DB2 database name We restart the security listener (off-hours), change the main config file from item 1, stop and restart the instance. It is now authenticating via LDAP. We add the stop and start commands for this instance to the HA failover scripts. We import an XML config file into the instance that defines things for the actual application for the customer - user names, groups, permissions, and business rules. The XML is supplied by the implementation team. Now, we configure the dataloading application We add a stanza to the existing top-level config file that points to a new customer-level config file. The new customer-level config file includes: the instance (customer) name the DB2 database name arbitrary number of sub-config files, by name Each of the sub-config files defines: filepaths to the directories for ingestion, feedback, backup, and failure those filepaths have a common path to a customer-specific folder, and then one folder for each sub-config file Each of those filepaths needs to be created We need to add this customer instance to our monitoring scripts that confirm the proper processes are running and can be logged into. Of course, those monitoring config files include the instance name, the TCP port, the DB2 database name, etc. There's also a reporting application that needs to be configured for the new instance. You get the idea. There's also XML that is loaded into WAS by the middleware team. We give them the values for them to plug into the XML - they could very easily hand us the template and we could give them back completed XML.

  Read the article

• Excel 2010: dynamic update of drop down list based upon datasource validation worksheet changes

  - by hornetbzz

  I have one worksheet for setting up the data sources of multiple data validation lists. in other words, I'm using this worksheet to provide drop down lists to multiple other worksheets. I need to dynamically update all worksheets upon any of a single or several changes on the data source worksheet. I may understand this should come with event macro over the entire workbook. My question is how to achieve this keeping the "OFFSET" formula across the whole workbook ? Thx To support my question, I put the piece of code that I'm trying to get it working : Provided the following informations : I'm using such a formula for a pseudo dynamic update of the drop down lists, for example : =OFFSET(MyDataSourceSheet!$O$2;0;0;COUNTA(MyDataSourceSheet!O:O)-1) I looked into the pearson book event chapter but I'm too noob for this. I understand this macro and implemented it successfully as a test with the drop down list on the same worksheet as the data source. My point is that I don't know how to deploy this over a complete workbook. Macro related to the datasource worksheet : Option Explicit Private Sub Worksheet_Change(ByVal Target As Range) ' Macro to update all worksheets with drop down list referenced upon ' this data source worksheet, base on ref names Dim cell As Range Dim isect As Range Dim vOldValue As Variant, vNewValue As Variant Dim dvLists(1 To 6) As String 'data validation area Dim OneValidationListName As Variant dvLists(1) = "mylist1" dvLists(2) = "mylist2" dvLists(3) = "mylist3" dvLists(4) = "mylist4" dvLists(5) = "mylist5" dvLists(6) = "mylist6" On Error GoTo errorHandler For Each OneValidationListName In dvLists 'Set isect = Application.Intersect(Target, ThisWorkbook.Names("STEP").RefersToRange) Set isect = Application.Intersect(Target, ThisWorkbook.Names(OneValidationListName).RefersToRange) ' If a change occured in the source data sheet If Not isect Is Nothing Then ' Prevent infinite loops Application.EnableEvents = False ' Get previous value of this cell With Target vNewValue = .Value Application.Undo vOldValue = .Value .Value = vNewValue End With ' LOCAL dropdown lists : For every cell with validation For Each cell In Me.UsedRange.SpecialCells(xlCellTypeAllValidation) With cell ' If it has list validation AND the validation formula matches AND the value is the old value If .Validation.Type = 3 And .Validation.Formula1 = "=" & OneValidationListName And .Value = vOldValue Then ' Debug ' MsgBox "Address: " & Target.Address ' Change the cell value cell.Value = vNewValue End If End With Next cell ' Call to other worksheets update macros Call Sheets(5).UpdateDropDownList(vOldValue, vNewValue) ' GoTo NowGetOut Application.EnableEvents = True End If Next OneValidationListName NowGetOut: Application.EnableEvents = True Exit Sub errorHandler: MsgBox "Err " & Err.Number & " : " & Err.Description Resume NowGetOut End Sub Macro UpdateDropDownList related to the destination worksheet : Sub UpdateDropDownList(Optional vOldValue As Variant, Optional vNewValue As Variant) ' Debug MsgBox "Received info for update : " & vNewValue ' For every cell with validation For Each cell In Me.UsedRange.SpecialCells(xlCellTypeAllValidation) With cell ' If it has list validation AND the validation formula matches AND the value is the old value ' If .Validation.Type = 3 And .Value = vOldValue Then If .Validation.Type = 3 And .Value = vOldValue Then ' Change the cell value cell.Value = vNewValue End If End With Next cell End Sub

  Read the article

• why gcc emits segmentation ,after my code run

  - by gcc

  every time ,why have I encountered with segmentation fault ? still,I have not found my fault sometimes, gcc emits segmentation fault ,sometimes, memory satck limit is exceeded I think you will understand (easily) what is for that code void my_main() { char *tutar[50],tempc; int i=0,temp,g=0,a=0,j=0,d=1,current=0,command=0,command2=0; do{ tutar[i]=malloc(sizeof(int)); scanf("%s",tutar[i]); temp=*tutar[i]; } while(temp=='x'); i=0; num_arrays=atoi(tutar[i]); i=1; tempc=*tutar[i]; if(tempc!='x' && tempc!='d' && tempc!='a' && tempc!='j') { current=1; arrays[current]=malloc(sizeof(int)); l_arrays[current]=calloc(1,sizeof(int)); c_arrays[current]=calloc(1,sizeof(int));} i=1; current=1; while(1) { tempc=*tutar[i]; if(tempc=='x') break; if(tempc=='n') { ++current; arrays[current]=malloc(sizeof(int)); l_arrays[current]=calloc(1,sizeof(int)); c_arrays[current]=calloc(1,sizeof(int)); ++i; continue; } if(tempc=='d') { ++i; command=atoi(tutar[i])-1; free(arrays[command]); free(l_arrays[command]); free(c_arrays[command]); ++i; continue; } if(tempc=='j') { ++i; current=atoi(tutar[i])-1; if(arrays[current]==NULL) { arrays[current]=malloc(sizeof(int)); l_arrays[current]=calloc(1,sizeof(int)); c_arrays[current]=calloc(1,sizeof(int)); ++i; } else { a=l_arrays[current]; j=l_arrays[current]; ++i;} continue; } } }

  Read the article

• LLBLGen Pro feature highlights: grouping model elements

  - by FransBouma

  (This post is part of a series of posts about features of the LLBLGen Pro system) When working with an entity model which has more than a few entities, it's often convenient to be able to group entities together if they belong to a semantic sub-model. For example, if your entity model has several entities which are about 'security', it would be practical to group them together under the 'security' moniker. This way, you could easily find them back, yet they can be left inside the complete entity model altogether so their relationships with entities outside the group are kept. In other situations your domain consists of semi-separate entity models which all target tables/views which are located in the same database. It then might be convenient to have a single project to manage the complete target database, yet have the entity models separate of each other and have them result in separate code bases. LLBLGen Pro can do both for you. This blog post will illustrate both situations. The feature is called group usage and is controllable through the project settings. This setting is supported on all supported O/R mapper frameworks. Situation one: grouping entities in a single model. This situation is common for entity models which are dense, so many relationships exist between all sub-models: you can't split them up easily into separate models (nor do you likely want to), however it's convenient to have them grouped together into groups inside the entity model at the project level. A typical example for this is the AdventureWorks example database for SQL Server. This database, which is a single catalog, has for each sub-group a schema, however most of these schemas are tightly connected with each other: adding all schemas together will give a model with entities which indirectly are related to all other entities. LLBLGen Pro's default setting for group usage is AsVisualGroupingMechanism which is what this situation is all about: we group the elements for visual purposes, it has no real meaning for the model nor the code generated. Let's reverse engineer AdventureWorks to an entity model. By default, LLBLGen Pro uses the target schema an element is in which is being reverse engineered, as the group it will be in. This is convenient if you already have categorized tables/views in schemas, like which is the case in AdventureWorks. Of course this can be switched off, or corrected on the fly. When reverse engineering, we'll walk through a wizard which will guide us with the selection of the elements which relational model data should be retrieved, which we can later on use to reverse engineer to an entity model. The first step after specifying which database server connect to is to select these elements. below we can see the AdventureWorks catalog as well as the different schemas it contains. We'll include all of them. After the wizard completes, we have all relational model data nicely in our catalog data, with schemas. So let's reverse engineer entities from the tables in these schemas. We select in the catalog explorer the schemas 'HumanResources', 'Person', 'Production', 'Purchasing' and 'Sales', then right-click one of them and from the context menu, we select Reverse engineer Tables to Entity Definitions.... This will bring up the dialog below. We check all checkboxes in one go by checking the checkbox at the top to mark them all to be added to the project. As you can see LLBLGen Pro has already filled in the group name based on the schema name, as this is the default and we didn't change the setting. If you want, you can select multiple rows at once and set the group name to something else using the controls on the dialog. We're fine with the group names chosen so we'll simply click Add to Project. This gives the following result:   (I collapsed the other groups to keep the picture small ;)). As you can see, the entities are now grouped. Just to see how dense this model is, I've expanded the relationships of Employee: As you can see, it has relationships with entities from three other groups than HumanResources. It's not doable to cut up this project into sub-models without duplicating the Employee entity in all those groups, so this model is better suited to be used as a single model resulting in a single code base, however it benefits greatly from having its entities grouped into separate groups at the project level, to make work done on the model easier. Now let's look at another situation, namely where we work with a single database while we want to have multiple models and for each model a separate code base. Situation two: grouping entities in separate models within the same project. To get rid of the entities to see the second situation in action, simply undo the reverse engineering action in the project. We still have the AdventureWorks relational model data in the catalog. To switch LLBLGen Pro to see each group in the project as a separate project, open the Project Settings, navigate to General and set Group usage to AsSeparateProjects. In the catalog explorer, select Person and Production, right-click them and select again Reverse engineer Tables to Entities.... Again check the checkbox at the top to mark all entities to be added and click Add to Project. We get two groups, as expected, however this time the groups are seen as separate projects. This means that the validation logic inside LLBLGen Pro will see it as an error if there's e.g. a relationship or an inheritance edge linking two groups together, as that would lead to a cyclic reference in the code bases. To see this variant of the grouping feature, seeing the groups as separate projects, in action, we'll generate code from the project with the two groups we just created: select from the main menu: Project -> Generate Source-code... (or press F7 ;)). In the dialog popping up, select the target .NET framework you want to use, the template preset, fill in a destination folder and click Start Generator (normal). This will start the code generator process. As expected the code generator has simply generated two code bases, one for Person and one for Production: The group name is used inside the namespace for the different elements. This allows you to add both code bases to a single solution and use them together in a different project without problems. Below is a snippet from the code file of a generated entity class. //... using System.Xml.Serialization; using AdventureWorks.Person; using AdventureWorks.Person.HelperClasses; using AdventureWorks.Person.FactoryClasses; using AdventureWorks.Person.RelationClasses; using SD.LLBLGen.Pro.ORMSupportClasses; namespace AdventureWorks.Person.EntityClasses { //... /// <summary>Entity class which represents the entity 'Address'.<br/><br/></summary> [Serializable] public partial class AddressEntity : CommonEntityBase //... The advantage of this is that you can have two code bases and work with them separately, yet have a single target database and maintain everything in a single location. If you decide to move to a single code base, you can do so with a change of one setting. It's also useful if you want to keep the groups as separate models (and code bases) yet want to add relationships to elements from another group using a copy of the entity: you can simply reverse engineer the target table to a new entity into a different group, effectively making a copy of the entity. As there's a single target database, changes made to that database are reflected in both models which makes maintenance easier than when you'd have a separate project for each group, with its own relational model data. Conclusion LLBLGen Pro offers a flexible way to work with entities in sub-models and control how the sub-models end up in the generated code.

  Read the article

• When do I use Apache Kafka, Azure Service Bus, vs Azure Queues?

  - by makerofthings7

  I'm trying to understand the situations I'd use Apache Kafka, Azure Service Bus, or Azure Queues for high scale message processing. Which is better for standard Pub Sub situations? Where multiple clients get a copy of the same message? Which is better for low latency Pub sub and no durability? Which is better for "cooperating producer" and "competing consumer"? (what does this mean?) I see a bit of overlap in function between Kafka, Service Bus, Azure Queues

  Read the article

• Writing the tests for FluentPath

  - by Bertrand Le Roy

  Writing the tests for FluentPath is a challenge. The library is a wrapper around a legacy API (System.IO) that wasn’t designed to be easily testable. If it were more testable, the sensible testing methodology would be to tell System.IO to act against a mock file system, which would enable me to verify that my code is doing the expected file system operations without having to manipulate the actual, physical file system: what we are testing here is FluentPath, not System.IO. Unfortunately, that is not an option as nothing in System.IO enables us to plug a mock file system in. As a consequence, we are left with few options. A few people have suggested me to abstract my calls to System.IO away so that I could tell FluentPath – not System.IO – to use a mock instead of the real thing. That in turn is getting a little silly: FluentPath already is a thin abstraction around System.IO, so layering another abstraction between them would double the test surface while bringing little or no value. I would have to test that new abstraction layer, and that would bring us back to square one. Unless I’m missing something, the only option I have here is to bite the bullet and test against the real file system. Of course, the tests that do that can hardly be called unit tests. They are more integration tests as they don’t only test bits of my code. They really test the successful integration of my code with the underlying System.IO. In order to write such tests, the techniques of BDD work particularly well as they enable you to express scenarios in natural language, from which test code is generated. Integration tests are being better expressed as scenarios orchestrating a few basic behaviors, so this is a nice fit. The Orchard team has been successfully using SpecFlow for integration tests for a while and I thought it was pretty cool so that’s what I decided to use. Consider for example the following scenario: Scenario: Change extension Given a clean test directory When I change the extension of bar\notes.txt to foo Then bar\notes.txt should not exist And bar\notes.foo should exist This is human readable and tells you everything you need to know about what you’re testing, but it is also executable code. What happens when SpecFlow compiles this scenario is that it executes a bunch of regular expressions that identify the known Given (set-up phases), When (actions) and Then (result assertions) to identify the code to run, which is then translated into calls into the appropriate methods. Nothing magical. Here is the code generated by SpecFlow: [NUnit.Framework.TestAttribute()] [NUnit.Framework.DescriptionAttribute("Change extension")] public virtual void ChangeExtension() { TechTalk.SpecFlow.ScenarioInfo scenarioInfo = new TechTalk.SpecFlow.ScenarioInfo("Change extension", ((string[])(null))); #line 6 this.ScenarioSetup(scenarioInfo); #line 7 testRunner.Given("a clean test directory"); #line 8 testRunner.When("I change the extension of " + "bar\\notes.txt to foo"); #line 9 testRunner.Then("bar\\notes.txt should not exist"); #line 10 testRunner.And("bar\\notes.foo should exist"); #line hidden testRunner.CollectScenarioErrors();} The #line directives are there to give clues to the debugger, because yes, you can put breakpoints into a scenario: The way you usually write tests with SpecFlow is that you write the scenario first, let it fail, then write the translation of your Given, When and Then into code if they don’t already exist, which results in running but failing tests, and then you write the code to make your tests pass (you implement the scenario). In the case of FluentPath, I built a simple Given method that builds a simple file hierarchy in a temporary directory that all scenarios are going to work with: [Given("a clean test directory")] public void GivenACleanDirectory() { _path = new Path(SystemIO.Path.GetTempPath()) .CreateSubDirectory("FluentPathSpecs") .MakeCurrent(); _path.GetFileSystemEntries() .Delete(true); _path.CreateFile("foo.txt", "This is a text file named foo."); var bar = _path.CreateSubDirectory("bar"); bar.CreateFile("baz.txt", "bar baz") .SetLastWriteTime(DateTime.Now.AddSeconds(-2)); bar.CreateFile("notes.txt", "This is a text file containing notes."); var barbar = bar.CreateSubDirectory("bar"); barbar.CreateFile("deep.txt", "Deep thoughts"); var sub = _path.CreateSubDirectory("sub"); sub.CreateSubDirectory("subsub"); sub.CreateFile("baz.txt", "sub baz") .SetLastWriteTime(DateTime.Now); sub.CreateFile("binary.bin", new byte[] {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0xFF}); } Then, to implement the scenario that you can read above, I had to write the following When: [When("I change the extension of (.*) to (.*)")] public void WhenIChangeTheExtension( string path, string newExtension) { var oldPath = Path.Current.Combine(path.Split('\\')); oldPath.Move(p => p.ChangeExtension(newExtension)); } As you can see, the When attribute is specifying the regular expression that will enable the SpecFlow engine to recognize what When method to call and also how to map its parameters. For our scenario, “bar\notes.txt” will get mapped to the path parameter, and “foo” to the newExtension parameter. And of course, the code that verifies the assumptions of the scenario: [Then("(.*) should exist")] public void ThenEntryShouldExist(string path) { Assert.IsTrue(_path.Combine(path.Split('\\')).Exists); } [Then("(.*) should not exist")] public void ThenEntryShouldNotExist(string path) { Assert.IsFalse(_path.Combine(path.Split('\\')).Exists); } These steps should be written with reusability in mind. They are building blocks for your scenarios, not implementation of a specific scenario. Think small and fine-grained. In the case of the above steps, I could reuse each of those steps in other scenarios. Those tests are easy to write and easier to read, which means that they also constitute a form of documentation. Oh, and SpecFlow is just one way to do this. Rob wrote a long time ago about this sort of thing (but using a different framework) and I highly recommend this post if I somehow managed to pique your interest: http://blog.wekeroad.com/blog/make-bdd-your-bff-2/ And this screencast (Rob always makes excellent screencasts): http://blog.wekeroad.com/mvc-storefront/kona-3/ (click the “Download it here” link)

  Read the article

• Mobile websites, where is it going to?

  - by Fadi Tiwari

  As building websites for mobile devices is becoming an important area I have a question that has some sub questions regarding this new field and the main question is: Will web development for mobile devices grow in the next few years? The sub questions are: Will there be standalone mobile web applications? meaning that a web application that is designed and developed to browse from mobile only? What about the advertisements and how can companies and freelancers get money from their mobile web applications? Cheers.

  Read the article

• Domain masking (and simple page links)

  - by Halik

  How do you set up the domain (Im using godaddy) to mask the server url but to append the sub-page link. Im thinking something like the wikipedia en.wikipedia.org/wiki/something (or, if it would require httpd.conf access, setting it to append the default subpage link eg. '?page_id=2') Currently I can set up the domain to either be masked completely without showing any sub-page links or to simply redirect my domain to my web server.

  Read the article

• Wordpress subcatagory navigation with permalinks

  - by Towhid

  I used beautiful permalinks on my WP website but navigation in sub subcategories is not possible. for example these URLs are fine: http://technopolis.ir/category/articles/security-articles/ & http://technopolis.ir/category/articles/security-articles/page/2/ but this sub subcategory will generate 404 on 2nd page: http://technopolis.ir/category/articles/security-articles/backtrack/ [first page is fine] http://technopolis.ir/category/articles/security-articles/backtrack/page/2/ [404 error]

  Read the article

• How do I zip up a folder but exclude the .git subfolder

  - by Tom

  I'm trying to create a zip file from a folder and I'd like to exclude the .git sub-folder from the resulting zip file. I have gone to the parent folder of the one I want to zip (called bitvolution) and I'm doing: zip -r bitvolution.zip bitvolution -x ".git" But it doesn't exclude the .git sub-folder. I've tried various combinations, -x .git*, -x \.git/*, -x .git/\*, -x \.git/\*. I've also tried using the full path for the exclude argument... but just didn't get there.

  Read the article

• Alternative for Subdomains [duplicate]

  - by Raj

  This question already has an answer here: Should I choose sub-directories over sub-domains in this case? 2 answers I have a company and website like www.example.com We have 1 industry with product 1 ,product 2 and another industry with product 3 and product 4 . All these products are different to each other my questions is like should have subdomains like www.industry1.example.com or www.example.com/industry1 If it is industry1.example.com it might sense different domain , if it is example.com/industry1 the number of folders might increase Please suggest a best solution for this thanks, Raj

  Read the article

• Contract / Project / Line-Item hierarchy design considerations

  - by Ryan

  We currently have an application that allows users to create a Contract. A contract can have 1 or more Project. A project can have 0 or more sub-projects (which can have their own sub-projects, and so on) as well as 1 or more Line. Lines can have any number of sub-lines (which can have their own sub-lines, and so on). Currently, our design contains circular references, and I'd like to get away from that. Currently, it looks a bit like this: public class Contract { public List<Project> Projects { get; set; } } public class Project { public Contract OwningContract { get; set; } public Project ParentProject { get; set; } public List<Project> SubProjects { get; set; } public List<Line> Lines { get; set; } } public class Line { public Project OwningProject { get; set; } public List ParentLine { get; set; } public List<Line> SubLines { get; set; } } We're using the M-V-VM "pattern" and use these Models (and their associated view models) to populate a large "edit" screen where users can modify their contracts and the properties on all of the objects. Where things start to get confusing for me is when we add, for example, a Cost property to the Line. The issue is reflecting at the highest level (the contract) changes made to the lowest level. Looking for some thoughts as to how to change this design to remove the circular references. One thought I had was that the contract would have a Dictionary<Guid, Project> which would contain ALL projects (regardless of their level in hierarchy). The Project would then have a Guid property called "Parent" which could be used to search the contract's dictionary for the parent object. THe same logic could be applied at the Line level. Thanks! Any help is appreciated.

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >