Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 125/215 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

• How to play from mic to speakers in Ubuntu Karmic?

  - by vava

  Ok, I have a silly problem. I have few bluetooth headsets lying around and I want to make DYI baby monitor out of them. All I need is for some application to listen to the mic and send it to the speakers. Loopback (even though it doesn't work) is not good enough, it'll send sound from the mic to the speakers in the same device but I need it to go across devices. So does anyone know some application that can do that? I'm looking for something small and easy to use, not jackd or similar.

  Read the article

• Can I buy a wireless access point that also acts as a DNS nameserver?

  - by Brabster

  Hi, I was wondering if I buy a wireless access point/router that also acts as a DNS nameserver for DHCP clients. I can see the hostnames of my home devices in the DHCP clients table of the router I have, it doesn't seem like a great leap of the imagination to have a local nameserver on there, something like hostname.home that automatically publishes those entries to a local zone. But - I can't find one that does that. Is there a reason why this shouldn't/can't be done? Or is my Google-Fu just weak? Cheers,

  Read the article

• How do I force a specific MTU for only certain TCP ports?

  - by Dave S.

  Background I have a set of embedded hardware deployed in the field. These remote machines connect back to my servers at AWS running Ubuntu and I use the iptables mangle chain to lower the MTU to 500 so these devices are happy. For reference, this is the iptables rule I am using: -A POSTROUTING -p tcp --sport 12345 --tcp-flags SYN,RST SYN -o eth0 -j TCPMSS --set-mss 500 Current Problem I'm trying to spin up some servers on the Joyent Cloud using SmartOS, but I can't find any information on selectively changing the MTU like I can on Linux (e.g. all info I've found is on changing it globally, which is not what I want). How would I do it so that all connections on TCP port 12345 get the MTU I want?

  Read the article

• HDMI Audio drops out when display enters powersave

  - by Jared Tritsch

  I have a Windows 8 machine with an AMD APU attached to my Home Theater system through HDMI (HDMI routes through a Home Theater AMP, then into the TV). Here's my problem, Whenever the display is interrupted, usually by the TV being turned off or into powersave mode, the audio device lists as "Disconnected" in windows audio devices and I cant get it to re-recognize that the HDMI audio is, in fact, plugged in. The only solution I have found so far is to restart the machine, which will then recognize the device without any problems, until the next time the TV turns off and the problem once again resurfaces. Has anyone else seen this phenomenon? I have no idea if its the GPU, the HDMI interface, the AMP, or even the TV itself, as there really isn't much a way to tell...

  Read the article

• Windows 8.1 killed my wifi

  - by char1es

  Was running Windows 8 on a Lenovo G780 and updated to windows 8.1 Wifi does not work anymore, i always receive a dns server not responding error. I have tried using public dns servers from Google but with still no results. I've restarted my router with no results. All other devices on my network are having no trouble at all. I've tried updating the wireless driver but the manufacturers website claims that the Win8.1 driver should be updated with the update from windows. So i cant find a wireless driver... Anyone else having this error and does anyone have any ideas on how to fix it?? EDIT: here are the driver details: Broadcom 802.11n Network Adapter Provider: Microsoft Driver Date: 2013-05-31 Driver Version: 6.30.223.102 Digital Signer: Microsoft Windows Thanks

  Read the article

• Using Apache Environment Variables to set custom ErrorDocument

  - by Tad

  I've got a set of RewriteCond rules that test for various mobile devices and then set environment variables like "env=device:.iphone" or "env=device:.smartphone" if the useragent matches an iPhone or Android device. I'm trying to now redirect the user to custom-styled 404/500 server error pages for each device, by way of the error pages. Ideally I'd like to be able to test for a variable being there, and then write in a custom ErrorDocument string. But an apache doesn't seem to work in this case. Any ideas how I can construct if/else tests in an apache conf file for environment vars?

  Read the article

• Is there some standard way to publish a calendar feed?

  - by CMP

  For a web application I am working on, I would like to be able to give the user a single url that they can enter into the calendar application of their choosing to have events from our application show up in their calendar. Most other sites I have seen that do similar things will have a one time download of an .ics file that can be imported. If I have to require my users to download a new file every time the schedule changes, it sort of defeats the purpose of having the feed at all. The calendar can change many many times a day. What I would really like is something like rss where their calendar program can look up a url and automatically see the most recent data. Does anything like this exist? Our main target is mobile devices, so it really should be supported by iCal and google Calendar. Anything else is bonus.

  Read the article

• Replacing sick NTP server source and re-synching (with internal time currently 2 minutes late)

  - by l0c0b0x

  One of the external NTP servers (the primary one--currently) we're using as source seems to not be responding to NTP calls. Unfortunately, on our core router (Cisco 6509), the NTP functionality hasn't switched to the secondary NTP external server as it was expected. As a result, our core router which is pretty much our main internal NTP source is 2 minutes late. I'm planning to fix the external router issue by making the external NTP source be the one currently working. I'm wondering, how much will a 2 minute change affect my users and services? Specially since these days, we're heavily relying on certificate-based authentication. We're a Windows/Cisco shop. Internal NTP setup: [Core Router 1 / Cisco 6509]: looking out to two external NTP servers (in which the primary one is not responding to NTP calls) [Core Router 2]: Synching with Core router 1 (primary), working external router (secondary) [Other Cisco network devices]: Synching with Core router 1 (primary), core router 2 (secondary) [Domain controller(s)]: Synching with Core router 1 [All windows clients/servers]: Synching with domain controllers

  Read the article

• Remote Control Home PC from Corporate Work PC

  - by muncherelli

  Here is my situation: I am currently on a Windows XP workstation at work. I have an android tablet that I use to splashtop into my home PC. I would like to be able to use my work keyboard and mouse to control my home PC while I am splashtop'd into it using my tablet. My work PC is on a corporate LAN, and not on the same network as my tablet. The company I work for provides wifi for personal devices, but they are not accessable to the internal network. I thought about going the Synergy route, however that would require my home PC to be able to connect to my work PC which isn't really possible. The opposite would work though, if I could reverse connect the server to the client, but the Synergy software doesn't really support that. I do have a couple linux boxes running at home, so I can ssh into my home network and tunnel ports via SSH if needed. With what I have, how can I accomplish seamless keyboard and mouse sharing between my work PC and either my home PC or my android tablet?

  Read the article

• How to detect device type from device connected to router?

  - by molly

  I have a att router and there is an unknown device connected to my network. I can't seem to kick it off because of how att's router settings are created which is kind of dumb. I am able to see its local ip and mac address. I am on a mac with snow leopard. How can I get more information on the device with the information that I have? I want to see what kind of device it is, I have checked all devices that are connected to the router and none seem to match the local ip that is connected. I have WPA encryption setup with a strong password.

  Read the article

• using iphone to control mac

  - by Ajay Pandey

  i want to use iPhone touch screen as the touchPad for my mac while both devices are connected via bluetooth. So far i hv gone for two approaches what i want is an application which when launched turns the bluetooth on and get connected to mac.Further ...screen of iPhone becomes the touch pad for mac. i dont want to install anything at the mac like any server........ I have already tried the vnc and remotePad approach. the one with vnc looks more promising for me..but even in that case i have to install a vnc server on mac ,i guess and then we'll have to actually call vnc client while my application is still running,which does not look real in 3.2 verson as it does not support multi tasking. Is there any other way of doing it? or is there anything wrong in my above interpretation? please let me know if there is anyother approach of doing the same or if i can do any thing different with my current approach. hoping for quick response Thanks

  Read the article

• Servers at remote sites vs. centralized servers?

  - by Boden

  Looking for some opinions here. We've got three physical locations and site-to-site VPN between all three. Currently we've got Windows domain controllers at each location, with roughly 50 clients at each. The domains are currently separate, and we're looking at integrating the three sites. Email (Exchange) will be located at the primary site, and RPD is already being used at the secondary branches to hit the app servers also located at the primary site. The bulk of the local user load at the other two sites is just file sharing. What would the main benefits and drawbacks be of replacing the local domain controllers with NAS devices, and only keeping the domain controller(s) at the primary site? (assuming upgrades are coming regardless) Under what circumstances would you choose one setup over the other?

  Read the article

• USB forwarding from dom0 to domU

  - by Karolis T.

  What are my options to forward two USB connected phones to xen guest? I've read about PCI-passthrough http://www.wlug.org.nz/XenPciPassthrough, but I'm sure usb controller in the server isn't a pci card. There's device level forwarding, but I need to forward two devices, this here doesn't say how to do it: http://www.olivetalks.com/2008/02/03/usb-forwarding-on-xen-it-just-does-not-work/ Would something as simple as: usbdevice = [ 'host:xxx', 'host:yyy', ] work? EDIT: I'm now starting a bounty. This is really important for me and for other people also, hoping someone who have this resolved will be able to help.

  Read the article

• How to troubleshoot memory card read?

  - by shinjin

  The built in memory card reader in my laptop mounts SD cards as read-only only. This happens both in Windows 7 and Ubuntu. Most of the time. Ever now an then it works. After a some non-deterministic combination of uninstalling/reinstalling/disabling/enabling of the driver with the mandatory reboots the card reader works for a while. Is there any sane way to troubleshoot if it's an actual hardware problem, or just a matter of drivers? I've tested it with several SD cards, that work just fine in other devices. System: Acer Aspire 8951G, Windows 7-64bit

  Read the article

• boot failure trying to install linux distro from a cd

  - by jdamae

  Hoping someone can help me get this installation from a cd going. I'm using an older pc: hp pavillion 2.66Ghz, 512RAM with a BIOS revision of 6/30/2003. I reclaimed some an older drive (Seagate ST340810A) that seems to be working as its recognized in the bios (auto-detected) I downloaded a mini.iso of ubuntu 10.10 that I want to install and burned the image to a CD for install. My boot sequence is: First Boot Device [CDROM] and I disabled devices 2-4 so I can just force it to read first from the CDROM. This old pc also has a separate CD writer which is a Sec.Slave, so the Sec.Master is the Toshiba DVD/ROM DSM-171 drive where I placed the burned cd with the linux distro. So, with these settings I cannot get it to boot. I get the "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". Where do I go from here? Thanks.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• What are the best possible ways to benchmark RAM (no-ECC) under linux / arm?

  - by moul

  I want to test integrity and global performances of no-ECC memory chips on a custom board Are there some tools that run under linux so I can monitor system and global temperature in the same time ? Are there some no-ECC specific tests to do in general ? EDIT 1: I already know how to monitor temperature (I use a special platform feature /sys/devices/platform/......../temp1_input). For now : wazoox : it works but I've to code my own tests Jason Huntley : ramspeed : does not work on arm stream benchmark : it works and is very fast, so I'll look if it's accurate and complete memtest : I'll try later, since it does not run directly from linux stress for fedora : I'll try later too, it's too problematic for me to install fedora now I found this distribution : http://www.stresslinux.org/sl/ I'll continue to check tools that run directly under linux without too big dependencies, after I'll maybe give a try to solutions like stresslinux, memtest, stress for fedora. Thanks for you answers, I'll continue to investigate

  Read the article

• What is automatic service location on the network?

  - by Roman

  I know that zeroconf does automatic service location on the local network. But what does it mean? For example there is a printer (printing is the service that it does). This printer choose randomly an IP for itself. It asks other devices if this IP is already occupied. If not, the printer occupies this IP. Then printer says to "everybody" that "printing" service is associated with this IP. Is it "automatic service location"? Or I got something wrong?

  Read the article

• Booting a GPT USB key on older BIOS laptop

  - by fonix232

  I have an old HP EliteBook 8530p, which does not support booting from GPT USB (GPT HDDs are fine though). Lately I had the wish to have a fast-to-start OS for browsing, smaller web tasks, etc., so I grabbed a ChromeOS build (latest one by ArnoldTheBat), flashed it on an 8GB flash drive, and popped it in. It did not boot, so I dug deeper and discovered that it actually is GPT, and cannot be converted to MBR. As my laptop does not support UEFI booting from USB (there's a really-really beta UEFI support in the BIOS, but as I said, it only supports GPT hard drives, not USB devices), I'm stuck. Is there any way of booting it, say, another flash drive with a specific boot loader/manager (e.g. Plop)?

  Read the article

• Bluetooth Connectivity that an error

  - by eka anggraini

  I have a bluetooth USB, every time I enter the bluetooth, bluetooth is active only a few seconds, after which it can not be used again In 'devices and printer' there is still a bluetooth but if you want to save the settings it can not, there are error message or bluetooth is revoked. I am using windows 7, whereas if use Windows XP smoothly no problems. This not only happens on my computer alone, my friend who has a build-in bluetooth also experienced the same thing with the same OS. Is there a patch / fix / update for its Windows? I've been brain-tweaking drivers for all but still can not.

  Read the article

• Realtek "Microphone Effects" no longer working

  - by abc

  I have a mic plugged into my computer, and I was able to use the "microphone effects" tab here to enable/disable noise suppression and acoustic echo cancellation. Noise suppression off and acoustic echo cancellation on were the most recent settings I had on before the problem occurred. I disabled my mic in the windows 7 "recording devices" tab, then re-enabled it. When it came back, these options were grayed out, and remained so even after a reboot. I am not sure why this is or how to fix it, all other options are still the same (Settings are identical to when it was working). Any ideas whats wrong or how to fix it? edit: can't post image due to being new.

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the Internet via Eth0. Has one wireless network adapter and one another ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration.

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the internet via Eth0. Has one wireless network adapter and one more ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration

  Read the article

• Server 2008 R2 Datacenter (and all other version) not detecting hardware

  - by Mitchell Skurnik

  I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

  Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >