Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 126/215 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• Setting Linux UID on NFS volume from EMC NX4

  - by ethrbunny

  I have an EMC NX4 from which there are several CIFS shares with corresponding NFS mount points. The CIFS user ids seem fine but when viewed from Linux they are all 327xx numbers and can't be set from the file system. (IE CHOWN doesn't work - permission denied). On our other (older) EMC devices we used an MMC app to set the Linux UID for each user. I don't seem to have such an app on the 'Applications and Tools' CD for this new device. Is there some other method for setting these? Did I setup the system incorrectly?

  Read the article

• How to have 2 windows machines on the same network with the same IP address

  - by Stu

  I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

  Read the article

• fstab mount after network initialization

  - by Philip

  I'm automatically mounting a NFS with fstab. Sometimes the mount fails because the hostname of the NFS mount cannot be resolved (getaddrinfo failed). I'm assuming that this happens because the network initialization is slower than the mounts. Is there any way to initialize the network before mounting any devices? I'm already using _netdev as a mount option but this does not help. This is my current fstab file: # <file system> <mount point> <type> <options> <dump> <pass> /dev/md2 / ext3 errors=remount-ro 0 1 /dev/md1 /boot ext3 errors=remount-ro 0 1 /dev/sda3 swap swap defaults 0 0 /dev/sdb3 swap swap defaults 0 0 connect.mygluster.net:/data /var/gluster/data glusterfs ro,_netdev 0

  Read the article

• Will I have internet connection issues next day, if I unplug router at night?

  - by headskracher77

  I did this regularly a few years ago and used to feel like I was 'being punished' by the Interent svc provider for disabling access to my computer, because trying to re-connect the next day became a constant pain. I have the same linksys router, a comcast modem, and hi-speed broadband through their LAN. Question: who or what is at fault for lousy internet connections, slow connections, or no connections: (everybody's tech dept. blames everybody else) The router? 10 year olds, maybe obsolete? The modem? came with the service plan - can connect three devices on a sharedconnection. The ISP: I read they not only even control and completely regulate bandwidth usage, but they also ration it!! (true?) So can I safely 'pull the plug' each night for security or not? thnx

  Read the article

• Password Manager that can sync a Blackberry and Mac OSX.

  - by pdhoven

  I use a Blackberry Bold and a Macbook Pro. I am looking for a solution to have a synchronized password manager between the two devices. All the commercial ones I have discovered won't work between a Blackberry and a Mac. The almost solution was KeePass. I like the application on the Blackberry but I could not get the sync working reliably to the Mac. As well, I had to run the PC application by using Mono on the Mac and it was pretty slow. I am happy to pay for a good solution.

  Read the article

• Ways to do simple failover with one server and two IPs

  - by CrassHoppr

  The setup is one server (Windows 2008) at one location with two incoming connections. As the server has to interface with various on-site devices, and will have a small number of incoming connections, a data center is not an option, and instead cable/dsl connections must be used. The goal is that users visit https://service.site.com and are sent to either the primary IP address or a secondary IP if the primary is down. I've seen advice to use round robin DNS for this, but caching an IP for a downed interface is something I'd like to avoid. Is something like this possible with these constraints?

  Read the article

• Seeking a solution to automatically copy files from the cd-rom disk to the USB drive once it's connected.

  - by Ray Nathan

  I plan to distribute a free CD that automatically copies files to a connected usb device. This process will be done on the computers of the users that obtain the cd. The CD will contain an autorun.ini file that will instruct the computer to copy a set of files located on the cd..to a specific directory on the connected usb device. The usb drive letter is not the same on all the systems, therefore...Windows XP should automatically know the drive letter of the usb device before the copy operation begins. What would be the best way of creating a short batch file or script that I can place on the CD to execute this process? Also, please note that it is NOT feasible or recommended to include a batch file on the USB devices to sync this operation due to the explanation at the beginning of this paragraph. :) Thank You All

  Read the article

• Transferring analog media (VHS casettes, vinyl records) to PC

  - by Javier Badia

  I have some VHSs and vinyl records which I'd like to convert to DVDs and CDs, respectively. I have a couple of questions about how to hook the devices up to the computer. I've seen some RCA-to-USB cables on the Internet like this one. Will those work for connecting the VCR to the computer? And what program would I use to take that and save it as a video file? Can I connect the phonograph directly to the Line In port in my PC or do I need some amplifier or something in the middle? I'm using Windows 7 x64, if it matters.

  Read the article

• What is the best solution for letting both Macs and PCs access digital images and videos on a networ

  - by Gertbert

  I'm looking for a simple way to share digital images and videos over a network to both Macs and PCs. I'm currently looking into three options: NAS, WD MyBook Mirror drives attached to a router, or an HP WHS product like the Data Vault. I'm looking for something easy to implement that allows for drive mirroring but also has good performance for both Macs and PCS. I've read that the HP WHS devices rebalance on their own schedules, making them useless for streaming video, and hope someone can definitively confirm or deny this as it's a dealbreaker if true. Any other suggestions are appreciated. Thanks!

  Read the article

• Where to find Linux drivers for my notebook

  - by smwikipedia

  Perhaps it is not proper to post on this forum. Sorry for any inconvenience. I have finally make up my mind to use Linux (Ubuntu 10.04) as the SOLE operating system on my notebook. The last obstacle is that where to find proper drivers for my devices? Such as: ATI Xpress 200M Video Adapter Texas Instrument SD Card Reader And many more... Could someone give me some advices on where to find these drivers? Many thanks.

  Read the article

• How to Set "<options>" in fstab - Manual Mounting is Successfull

  - by nicorellius

  I am not real familiar with fstab yet, so I have a couple questions. When I use this command to mount devices: sudo mount -t cifs -o username=admin //192.168.1.134/share_name /mnt/share_name With passwords: sudo="local user password" password="password for device" How do I translate that into an fstab entry? So far, I have tried this in the fstab and mounting fails: //192.168.1.134/share_name /mnt/share_name cifs default 0 0 This is where the question comes in. Where I have default, should there be something instead, indicating username=admin, etc?

  Read the article

• Why is my ethernet interface in promiscuous mode

  - by nhed

  I read that seeing a flag of M in netstat -i is the way to tell which of your interfaces is in promiscuous mode I run it and I see that eth1 is in promiscuous mode $ netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth1 1500 0 1770161198 0 0 0 57446481 0 0 0 BMRU lo 16436 0 97501566 0 0 0 97501566 0 0 0 LRU This seems to be the case on all the machines I checked (All Centos6.0, both virtual and physical), any idea why ethernet devices would be in such a mode unless someone was running any pcap based app (sudo lsof | grep pcap shows nothing)? I did not see any mention of promiscuous in any of the config files (sudo grep -r promis /etc) Any ideas what puts the interface into that mode and why? p.s. most of the posts I see seem to be security related, this is not that

  Read the article

• Can't find a wireless access point's IP address after changing router IP/LAN settings

  - by flagg19

  I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

  Read the article

• Connecting to a DLNA server in Vista's Media Centre

  - by Basic

  I've got a Windows 7 machine with a DLNA server set up. I can stream from it to my mobile and a number of other devices with no issues. All clients are auto-authorised so no permissions issues either. I have a Vista laptop on the network which I'd like to use to play back some of the videos. I can see the media server in the network view, if I double-click it, I can see the server in Windows Media Player. I can't find any way to add a DLNA source to Windows Media Centre, though. Where's the setting hidden?

  Read the article

• mdadm - Recovering a 'split' RAID1 array

  - by Hamza

  I have two drives that used to be part of a single RAID1 volume but it appears that one of them went offline for some time, something I've noticed just now when I rebooted my system. I now seem to have two RAID volumes, as reported by: # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md126 : active raid1 sdc[1] 2096116 blocks super 1.2 [2/1] [_U] md127 : active (auto-read-only) raid1 sdb[0] 2096116 blocks super 1.2 [2/1] [U_] unused devices: <none> Not exactly sure where to go from here. How can I merge and re-sync these volumes without data loss? Thanks.

  Read the article

• How to copy password from Mono-executed KeePass2 to xterm on Linux?

  - by Steve Emmerson

  I use KeePass2 to access username/password information in a Dropbox file. This allows convenient access from multiple devices. I can't seem to copy a password to the clipboard on my Linux 2.6.27.41-170.2.117.fc10.x86_64 system, however, in order to supply the password to a prompt in an xterm(1). I've tried both Ctrl+C/Ctrl+V and highlighting and mouse button 2 clicking. The KeePass2 program on the Linux system is executed by Mono. How can I copy the password to the xterm(1)? [Aside: I think we need a "KeePass" tag.] ADDENDUM: My mouse buttons were misconfigured: button 2 wasn't set to "copy". Sorry for the false alarm.

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• How to add addtional disks to a Windows 2008 KVM based Guest?

  - by taazaa

  I have a Win 2008 KVM based guest VM running on a Ubuntu 10 host. It is a raw image of 22G. I want to add a "data" drive which would show up as "D:\" drive on the guest. I first created a raw image using: qemu-img create -f raw ~/vmdisk2.img 50G Then, tried attaching it using virsh attach-disk. When that did not work, I tried editing the xml file of the VM directly. Both did not seem to work. I would greatly appreciate any help on how to do this and what the best practice is. I want to keep the base image small, so that I can clone it (hopefully) and then attach necessary storage based on the application at hand. Update: The xml of the vm before adding the second drive: <domain type='kvm'> <name>win08e-vm1</name> <uuid>183a4ba0-1c0b-0b04-ad01-aa7c3a4cb390</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/win08e-vm1.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/home/taazaa/iso/Win08ER264.iso'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:7f:a7:ae'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='vga' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> </domain> Thanks!

  Read the article

• Remote desktop to multiple windows machines on a LAN with dynamic IP

  - by kevyn

  Is it possible to use remote desktop to connect to multiple computers inside a network that has a dynamic IP address? I use a netgear WPN824 router which has dyndns onboard - but I currently use No-IP to control a single computer that I use most frequently. Every so often I need to get onto a couple of other computers in the network, but don't know how to go about this without logging onto one computer, and then starting another RDC session from that machine. What I would like to be able to do is connect to my router, and be able to see a list of connected devices, and then choose which to remote desktop onto. - I appreciate this probably is not be possible, but any other suggestions are welcome!

  Read the article

• How can you configure the uPnP server on windows home server?

  - by pschorf

  I'm currently helping my parents with their home network set up while I'm home. I have a Synology NAS device which supports a uPnP server. I have a few MPEG-4 movies stored on the box, and simply enabling the uPnP server on the NAS streamed the video to some devices they have, including their Xbox 360 and Samsung television. They have a windows home server (HP MediaSmart.) I put one of the movies in the "Videos" folder of the device, and enabled sharing. It shows up on the television, but when played it produces an "unsupported file type" error. I have all of the transcoding settings disabled on the Synology device, so it should be streaming the same file. Is there some additional configuration I need to perform on the home server unit?

  Read the article

• Bluetooth Headset drivers on Windows 7

  - by Tom Ribbens

  I have a Dell Precision with integrated bluetooth from work. I wanted to connect either one of my two bluetooth headsets (Plantronics UC Voyager Pro v2 and Sennheiser MM450X) in order to make calls with it using our Cisco IP Communicator. In both cases, the bluetooth pairs ok. Then Windows tries to install drivers, and fails, leaving the device useless. The devices work perfectly with my phone and tablet (both android). What can I do to get it to work? I can't seem to find drivers on either the Plantronics or the Sennheiser site. I am using the Plantronics without the USB dongle they provide, because that is temporarily misplaced :).

  Read the article

• Disable RAID Controller

  - by B.Mr.W.

  I have some decent HP Proliants server that come with "HP Smart Array P410i Controller" enabled, I am using these boxes to set up a Hadoop cluster and I know, RAID is for sure a no-no for Hadoop since the application itself will take care of data redundancy and extra intelligence provided by RAID won't be helpful and might turn down the performance. I tried to disable the devices at the BIOS and the box cannot even access the disk afterwards. So I am assuming the controller is sitting between disks and mother board, and we have to turn it on and configure it to "level0" or something like that. I am wondering what should I do to "disable" the RAID functionality so it will fit into the Hadoop environment.

  Read the article

• Is there a USB ethernet (wired) adapter that is really compatible with Windows 7 64-bit?

  - by nbolton

  I've checked the Windows 7 compatibility site, and it lists a fair few USB ethernet (wired, not wireless) adapters that should work with Windows 7 64-bit. However, whenever I Google for the model number and Windows 7 64-bit, there's many forum posts claiming that the devices actually don't work with 64-bit (but do work with 32-bit). I've actually also found this with the LUPO USB ethernet adapter; works with 32-bit win7, but not 64-bit (no drivers available). So is there anyone out there who is 100% certain, and have actually used successfully, a 64-bit win7 capable USB ethernet adapter?

  Read the article

• Xen 4.1 host (dom0) with blktap disks ("tap:aio:") not connecting

  - by Manwe

  Problem using blktap with xen-4.1 running Ubuntu Precise stock kernel with dom0 xen-4.1. I get: [ 5.580106] XENBUS: Waiting for devices to initialise: 295s...290s. ... [ 300.580288] XENBUS: Timeout connecting to device: device/vbd/51713 (local state 3, remote state 1) And some syslog lines: May 17 13:07:30 localhost logger: /etc/xen/scripts/blktap: add XENBUS_PATH=backend/tap/10/51713 May 17 13:07:31 localhost logger: /etc/xen/scripts/blktap: Writing backend/tap/10/51713/hotplug-status connected to xenstore. with tap:aio: disk lines. file:/ works. disk = [ 'tap:aio:/data/root.img,xvda1,w', ] Problem exists with lucid and precises domU kernels and both guests work in Ubuntu hardy dom0 Host 64bit 2.6.24-28-xen xen-3.3 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise

  Read the article

• How to route packets from Wi-Fi to Ethernet on OSX?

  - by Alexander Artemenko

  I have a trouble, configuring a home network. Here is how my devices are connected together: Internet     ? Wi-Fi Router ? MacBook     ? iMac ?ethernet cable? Synology NAS I have no ability to plugin NAS right into the Wi-Fi router. The problem is that MacBook does not see NAS, because they are in different networks — I configured Wi-Fi Router to serve 192.168.10.0/24 addresses, and configured iMac's ethernet connection to use 192.168.20/24 network. Is there a way to setup route from MacBook to the NAS?

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >