Search Results

Search found 6942 results on 278 pages for 'enabled'.

Page 125/278 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

• udhcpc doesn't assign ip address

  - by Diab

  i have a board running linux 2.6.28 and i have one Ethernet interface (eth0) i want dhcp to assign dynamic ip to this interface. i have busybox with udhcpc in the file system and the kernel has the "Pack Socket" enabled so i copied the scripts from "busybox-1.14.1/examples/udhcp" to my board on "/etc/udhcpc/" (i created this directory) and when i run : ifconfig eth0 up the interface is up but without ip address, then running udhcpc -i eth0 -s /etc/udhcpc/sample.script i get the following: note : sample.script contains : "exec /etc/udhcpc/sample.$1" # udhcpc -i eth0 -s /etc/udhcpc/sample.script udhcpc (v1.14.1) started Sending discover... Sending select for 192.168.10.198... Lease of 192.168.10.198 obtained, lease time 691200 but when i check with ifconfig i can see that it didn't assign the ip address to eth0. anyone have an idea why udhcpc didn't assign the ip ? Thanx

  Read the article

• What are the mandatory Linux kernel modules to run inside of ESXi

  - by Marcin

  I'm used to rolling my own kernels for servers, as it nicely minimizes the number of exploits (and the resulting patches) to take care of. In a traditional (bare metal) world, the whole process is about knowing what you have (hardware), and what you need (Ethernet, IPv4, iptables, etc.) In a virtualized environment, some things stay the same (still need Ethernet and IPv4), some things go away (power management), and then there are some new needs (vxnet3, or vmware-tools, even though that's compiled outside of the kernel). So my question mostly concerns itself with the last two categories: what can I remove completely, and what new stuff do I want? For example, what IO scheduler do I want, if all my disk operations are going through another filesystem/scheduler/cache to get to the virtual disk? Do I need hyper-threading enabled, or is the VM going to show them to me anyway as a CPU anyway? Do I need Large Receive Offload turned on, or is that something that the hypervisor's network drivers are going to do for me?

  Read the article

• Chassis fans and power LEDs still work in Hibernate

  - by Jaded

  I have ASRock Z68 Extreme3 Gen3 motherboard recently updated to 2.20 BIOS version. OS is Windows 7 x64. The problem is after that update full hibernation (by that i mean full system power off) stopped working although everything was fine before. Now when I press hibernate, sleep in initiated as usual, monitor goes to sleep, HDD and CPU fan stop spinning, but chassis fans (i have Gigabyte Aurora 3D 570 case with two rear and one front fans) still remain working. Also power leds are lit as if computer is turned on. Tried changing different UEFI settings related to sleep mode, and none of them change above described behaviour. I have "Deep Sleep" (Advanced-South Bridge Configuration) set to "Enabled in S4-S5", "Suspend to RAM" (Advanced-ACPI Configuration) set to "Auto", all fans settings in "H/W Monitor" set to "Auto".

  Read the article

• How do you enable multi-core virtualization in Windows 8 Pro?

  - by Greg B

  I've just got a new Dell Vostro 470 with a quad core (8 threads) i7 3770 and I'm trying to run virtual machines on it, which works fine, except if I want to assign multiple cores to a VM. I've checked the bios which states Intel Virtualization Technology [Enabled], but both Hyper-V and VirtualBox will only allow me to assign a single core. If I run the Intel Processor Identification Utility on the host OS it tells me that Intel Virtualization Technology isn't supported by the processor, but according to the Intel website, it is. So whats going on? Have Dell clipped the i7's wings? Is there some config in Windows I need to change?

  Read the article

• Personal Virtual Desktop Collection: User Assignment

  - by Fitzroy

  Using Windows Server 2012 Remote Desktop Services, I have a 'Personal Virtual Desktop Collection' with automatic user assignment enabled. According to Microsoft "Personal virtual desktops are permanently assigned to a user account and the user logs on to the same virtual desktop each time." Is there a way either through the Server Manager UI or PowerShell to determine which user has been assigned to which VM? The only way I have found so far is to query the 'Remote Desktop Users' group on each VM in the collection, however that requires each VM to be powered on. There must be a better way.

  Read the article

• Customize autoindent settings in VIMRC file

  - by Shane Reustle

  I have autoindent enabled in my .vimrc file but have run into an annoying bug/feature. For example, when I'm tabbed in 3 times, and I hit return, the new line is also tabbed in 3 times. Then when I hit enter again, that new line is also indented 3 times, as it should. The problem occurs when I go back up to the previous line (the first of the 2 new lines). VIM automatically removes the whitespace because it saw it as an empty line. Is there a way to disable this from happening? I'd like to be able to back to coding like this: function test(){ <return> <return> } <up> <right> Thanks!

  Read the article

• MSTSC Not working, disconnects shortly after connecting

  - by F4r-20

  I'm currently having a problem connecting remotely to a server. It is a brand new build Windows 2008 R2, remote users are enabled. I'm trying to connect from a Windows 7 machine. Everytime I remotely connect to the server it will stay connected for a matter of seconds (maybe 3-5) and then disconnect and I get the standard old cannot connect and list of reasons it could be. Then I cannot connect again and get this prompt until I restart the server. As soon as it's finished restarting, it happens all over again. The network and hardware configuration between the two machines is completely reliable. Does anybody know what else I could try? Thanks.

  Read the article

• What is the easiest way to get MySQL's Archive Storage Engine working on CentOS 5.4

  - by tronda

  The Archive Storage Engine is not enabled by the default build of MySQL in CentOS/RHEL. I would like to enable it on our CentOS 5.4 server. My initial reaction was to modify the SPEC file for the SRPMS file, but this indicates that this might not be that easy. There's always the option to build from MySQL source, but I would prefer if possible to stay within the RPMS/Yum world. Does anybody have a successful approach to this by using RPMS/SRPMS/Yum? Some patches which makes this work flawless with SRPMS?

  Read the article

• Windows Server 2012 - SSL Cypher Suite Order Not Long Enough

  - by Sam

  I want to re-order the cypher suites on our new Windows Server 2012 box to help mitigate the BEAST vulnerability for our clients. I went to Local Group Policy => Computer Configuration => Administrative Templates => Network => SSL Configuration Settings, opened SSL Cypher Suite Order, enabled it, and copied the values from the SSL Cypher Suites textbox. I pasted them into notepad, re-ordered them, then copied+pasted them back into the SSL Cypher Suites textbox. However, the box isn't long enough to hold them all, despite the fact that the length didn't change. I would have to drop the last 3 cyphers (SSL_CK_DES_192_EDE3_CBC_WITH_MD5,TLS_RSA_WITH_NULL_SHA256,TLS_RSA_WITH_NULL_SHA) in order for it to fit. Should I just drop them? Other ideas?

  Read the article

• Windows 8 - Ubuntu dual boot

  - by Serkan Özkan

  I bought a new Toshiba s855 notebook with windows 8 preinstalled. Secure boot feature was enabled by default. I installed latest version of ubuntu after disabling secure boot feature(it was not possible to install ubuntu without disabling secure boot). But now when I enable secure boot, the system automatically boots into windows 8, and it boots into ubuntu when I disable secure boot. EasyBCD lists the following boot entries but I can only see Windows 8 in boot menu: Default: Windows 8 Timeout: 7 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Ubuntu BCD ID: {971641cd-304a-11e2-be82-806e6f6e6963} Device: \Device\HarddiskVolume2 Bootloader Path: \EFI\ubuntu\grubx64.efi ... Entry #5 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Any recommendations will be appreciated.

  Read the article

• Remote desktop connection issues in windows server 2003

  - by rboorgapally

  Hi all, We are running windows server 2003 at our work place. I have enabled the remote desktop connections. I have also added all the users who connect to the server(three to four people) to the RDC group of users. Many of these users are also having Administrator access. The problem we are facing is that the connection is suddenly lost when we are working on something. Also, at times the system restarts by itself. Is this issue related to the limit on the number of users able to connect to the system? If so, why does the system accept new connections and/or terminate the existing connections? Has this anything to do with the users having administrator access so that all have equal prority and that is why existing connections are stalled? Also, please differentiate between console remote desktop and non console remote desktop.

  Read the article

• Media Sharing on Windows Server 2008 R2

  - by HCL

  I want a Server 2008R2 (x64) to act as DNLA-Server. I remember I tried this with a Server 2008 about two years ago and this was only possible with some ugly hacks. Is it on Server 2008R2 now possible to enable Windows MediaPlayer Media-Sharing by installing the desktop experience packet? Has someone already experience on this. Or is there another possibility to allow media sharing on a Server 2008R2 "the designated way"? I remember that on Server 2008 the way was to install the old MediaConnect-Pacakge. But I hesitate to install such a component on a server. Anciently I installed VirtualServer with Vista and enabled the media server there in, but this seems to me somewhat overkill for such a simple task.

  Read the article

• Switches with 802.1x "supplicant timeout" feature?

  - by chris

  I'm looking for a complete list of switches which will allow 802.1x and normal (non-supplicant) enabled hosts to connect to the same ports on a switch. This is useful for areas where there are semi-open ports such as a lobby area or a library where corporate and guest users may use the same ports but you want them to have different access profiles and where it isn't expected that guests would have 802.1x configured on their system. For instance, Enterasys and Extreme Networks both have a feature where if the switch doesn't see an EAPOL packet from the client in a certain amount of time, it puts the port into a "guest" VLAN; if it sees an 802.1x supplicant, it tries to authenticate the user via 802.1x and if they succeed, it does what the radius server tells it to do with that port (IE put the port into a certain VLAN, apply certain ACLs, etc) Do other vendors have this sort of feature, or is it expected that a switch will do both 802.1x and MAC authentication, and the "supplicant timeout" feature is implemented with a blanket allow on the MAC authentication?

  Read the article

• Vim - dynamic list of open buffers in a window

  - by asfallows

  I've investigated a few ways to maintain a list of open buffers in Vim, and some of them are very good, but none of them seem to behave the way I'd like. It's very possible that nothing like what I want exists, and it can't hurt to ask. I've been using NERDTree in GVim, and I like the idea of putting the information in a slender left-hand window. I've put together a handy diagram for how I'd like my environment to look: |--------|---------------------------------------| | | | | | | |NERDTree| Windows | | | | | | | | | | |--------| | | | | | | | | List | | | of | | | Open | | | Buffers| | | | | | | | |--------|---------------------------------------| So my question is: Is there a vim-native or plugin-enabled way to maintain a list of currently open buffers and select/edit/close from that list, inside a window similar to NERDTree? I understand that this approach may be incongruous with the Vim way of doing things, and if you feel like I'm missing something about how to manage multiple files in a Vim session, please leave a comment with suggestions!

  Read the article

• How to exclude a specific URL from basic authentication in Apache?

  - by ripper234

  Two scenarios: Directory I want my entire server to be password-protected, so I included this directory config in my sites-enabled/000-default: <Directory /> Options FollowSymLinks AllowOverride None AuthType Basic AuthName "Restricted Files" AuthUserFile /etc/apache2/passwords Require user someuser </Directory> The question is how can I exclude a specific URL from this? Proxy I found that the above password protection doesn't apply to mod_proxy, so I added this to my proxy.conf: <Proxy *> Order deny,allow Allow from all AuthType Basic AuthName "Restricted Files" AuthUserFile /etc/apache2/passwords Require user someuser </Proxy> How do I exclude a specific proxied URL from the password protection? I tried adding a new segment: <Proxy http://myspecific.url/> AuthType None </Proxy> but that didn't quite do the trick.

  Read the article

• Windows Firewall failing after 9-12 hours?

  - by routeNpingme

  I have 2 VM servers in the exact same NIC configuration: Server 2003 R2, one NIC connected to private (hardware firewall) network in a 10.x private address space, and one NIC connected straight to public internet. Windows Firewall is enabled for the Public Internet NIC only. Now, what doesn't make sense - this fails generally after 9-12 hours. It's not exact, but once or twice a day, traffic will just stop on the Internet NIC. No event log entries when it happens, and restarting the Windows Firewall service as well as stopping or restarting IPSec Services (just for fun) has no effect. Once the server is rebooted, everything is fine again for another 1/2 day. Any suggestions?

  Read the article

• Failed to configure CA certificate chain

  - by kron

  Hi All, I'm trying to setup SSL on fedora with apache. In my vhost... SSLCertificateFile /your/path/to/crt.crt SSLCertificateKeyFile /your/path/to/key.key SSLCertificateChainFile /your/path/to/DigiCertCA.crt I had it working fine with a self signed key, but can't get it to work with the DigiCertCA crt. When I run service httpd restart It fails to start. This is what I get in the logs... [Sat Jan 29 07:57:13 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suex$ [Sat Jan 29 07:57:13 2011] [error] Failed to configure CA certificate chain! Any assistance would be really appreciated! Thanks

  Read the article

• What does the fan speed sensor really report?

  - by T. Verron

  I have an overheating issue on my netbook (ASUS EeePC 1015PW), which I'm trying to troubleshoot. Using lm-sensors while overheating gave me this output : acpitz-virtual-0 Adapter: Virtual device temp1: +86.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4089 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +82.0°C (crit = +100.0°C) Core 1: +80.0°C (crit = +100.0°C) But I can't hear the fan. So I enabled manual pwm controling and set the fan to full speed, and after a few minutes I got this output : acpitz-virtual-0 Adapter: Virtual device temp1: +65.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4016 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +62.0°C (crit = +100.0°C) Core 1: +58.0°C (crit = +100.0°C) And this time I could hear the fan spinning. So there's quite obviously an issue with either fan control or fan monitoring. Hence the question : what kind of physical information does the fan sensor really report? Thank you PS. I should have added that the computer is a small, hard-to-disassemble netbook, so I can't and don't want to try experiments like "block the fan and see what the sensor reports".

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user53864

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• RDP over VPN only

  - by shiva

  I know this question has been asked many a times here. But i want to gain certain perspective here. I have enabled VPN on certain systems and then can access remote system using rdp. However they can access the remote system without rdp as well. Is this because all these systems are in same lan group? How can i ensure that rdp works only when connected to vpn? I am looking at one vpn system and people should log into that system and then connect to vpn and then access remote system using rdp. I know that this can be achieved but i am not sure how to go about it. please guide me

  Read the article

• Troubleshoot telnet connection from Windows 7 to UNIX

  - by Sujay Ghosh

  I am trying to connect to an Asterisk server in USA. I am using telnet < IP Address 5038 from India to USA. The person in USA is able to telnet to the IP address and port from USA , but I am not able to do it from India. We are on different networks. I am using Windows 7 Ultimate, and have enabled the Telnet client. I have also used Putty without any success. Can someone suggest me what can be the problem and how can this be resolved.

  Read the article

• Nginx Static Content Server Maxing Out?

  - by Harry

  I use nginx to serve the static content for a decently busy website of mine. I have the logging disabled, and 4 worker processes enabled with 5,000 connections per worker (which should yield a max connection limit of 20,000. The server is only operating at about 10% CPU usage and 50% ram, but it's very laggy, and sometimes nginx is so slow to respond to the requests, it times out. For a small number of connections, it's fine, but once any load starts occurring (~2,500 connections), it backs up and bogs down. Is there any other bottlenecks or limits that I might be hitting? This is a FreeBSD server, and all the static files are located locally (not NFS). The NIC is an unmetered gigabit, and it's only using around 75 megabit. Any insight would be appreciated. Thanks.

  Read the article

• Error installing Windows7 64 bits on VirtualBox

  - by MetaDark

  I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

  Read the article

• How do I remove the Refresh button from the Address toolbar?

  - by Iszi

  I like being able to run commands straight from my Task Bar. So, I've enabled the Address toolbar on my new Windows 7 system - just like I had on my old XP system. However, the bar seems to have a mandatory minimum length (I've posted a separate question about that) that's a bit longer than I'd prefer. Additionally, a bit more horizontal space is consumed by a Refresh button at the end of it. This Refresh button appears similar to the Go button that used to show by default in older versions. That button was easily removed by changing a registry value that doesn't seem to exist in Windows 7. Is there a similar registry hack I can use to remove the new Refresh button?

  Read the article

• Why does Task Scheduler NOT re-run successfully completed tasks

  - by Teo

  I am using Task Scheduler on Windows 2008 x64. I have 3 tasks, running every night on different times without overlapping. It works for some days - usually 2-3 up to 10 (it's really random), then it stops running the tasks. When I look at the history, I see that the tasks completed successfully. In the UI, the column "Next Run Time" stays empty. The tasks are set to run on background; the account for running them is a domain one - it is valid and enabled. When I check with Process Explorer, there are no left-over processes associated with my tasks. I am completely baffled at what's going on.

  Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >