Search Results

Search found 28369 results on 1135 pages for 'include once'.

Page 125/1135 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

  • Postfix qmgr process causes heavy overload on mailservers

    - by Mattias
    We are using Postfix as MTA for our e-mailmarketing software and once in a while we see that the load on one of the mailservers rises above 5. The load is caused by the qmgr-process which is the heart of Postfix and I see that it is consuming a lot of CPU resources. The process seems to be stuck because after 15 minutes it is still doing the samething and still increasing the load. Once I restart the postfix service the load rapidly decreases to below 1 and Postfix continues to send e-mails without any problems. I'm wondering if anyone else has encountered this problem and if people have suggestions on how to prevent it. The problem shows up on all our mailservers but almost never at more than 1 at the time. It seems to be triggered only when we are sending a mailing but the size (10 or 100.000 e-mails doesn't seem to make a difference). It maybe happens once a week or even less often and the time and day is also different every time. We tried to solve the problem by decreasing the amount of messages qmgr is allowed to process but this didn't solve it. We are using Postfix 2.5.5 on Debian Lenny 5.0.8 (postfix is installed through the default Debian repository). No special messages can be found in the logs (syslog, messages, mail.*). Thank you for your time

    Read the article

  • Anyone know a good mind mapper that works with a scheduler?

    - by GLycan
    TL;DR: Mind mapping tasks to be processed into a schedule based on task metadata. I have all sorts of ideas about what to invest resources (mainly time) in, but when I actually have time to do something I useually end up browsing reddit for not knowing what do to, and the frequancy with which I forget deadlines scares me. I'd love to bring order and structure into my mind, and always know what to do next. So, I want a mind mapping app, where I'd give each branch (types and subtypes of things I want to do) a importance score (if there were two branches, and one had 60 while the other 40, they would respectivily get 60% and 40% of the parent's importance, with the root being 100) and a how soon that branch should be revised/updated (an hobby I want to try out might be checked, say, once a week, while a school subject should be checked once a day) and give each leaf (something I want/need to do) how much time it takes, deadline (if any), and optionally an absolute importance, reoccurrence (guitar practice might repeat once a week), and prerequisites (reading something requires that book (although that could be brought somewhere), coding requires a box, jogging requires being outside) and maybe some other flags, like if it's enjoyable or not. It should either be packaged or working with a schedular app, to which I'd say, look, my day works this way (completely busy from 8 to 9:15, then 15 minutes of being inside with nothing, ..., two hours with box and possibility to go outside, etc), saying that such-and-such pattern is school and happens ever weekday except such-and-such days. The output should be of the form of a schedule, fit for printing or, when I finally get an android, mobile viewing, that schedules tasks with regards to availability of resources and importance (importance being derived from the leaf-task's parent branches), and the set of flags (all work and no play makes me a dull boy). One of these tasks should be reviewing anything that should be updated on that day, including future day layouts (e.g, if the time slots of future days have changed. This should be done every day.) Does anyone know some collection of preferably open-source (or free, or pirateable) tools, or better yet a single one, that accomplishes this task? I know python pretty well, and should be able to write any necessary glue.

    Read the article

  • How to install rmagick on Ubuntu 10.04?

    - by Andrew
    Here's what I've done so far: sudo apt-get install imagemagick libmagickcore-dev This did not throw any errors, so I think that ImageMagick is installed fine. Then I tried installing the gem: sudo gem install rmagick This resulted in the following error: ERROR: Error installing rmagick: ERROR: Failed to build gem native extension. /usr/bin/ruby1.8 extconf.rb checking for Ruby version >= 1.8.5... yes checking for gcc... yes checking for Magick-config... yes checking for ImageMagick version >= 6.4.9... yes checking for HDRI disabled version of ImageMagick... yes checking for stdint.h... yes checking for sys/types.h... yes checking for wand/MagickWand.h... no Can't install RMagick 2.13.1. Can't find MagickWand.h. *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/bin/ruby1.8 Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/rmagick-2.13.1 for inspection. Results logged to /usr/lib/ruby/gems/1.8/gems/rmagick-2.13.1/ext/RMagick/gem_make.out What do I need to do to install rmagick on Ubuntu 10.04?

    Read the article

  • Installing checkinstall on x86_64 bit

    - by SephMerah
    I downloaded the source for check install. checkinstall-1.6.2.tar.gz. I then tar -xzvf checkinstall-1.6.2.tar.gz Then I make. It prints this error: [root@ip-50-63-180-135 checkinstall-1.6.2]# make for file in locale/checkinstall-*.po ; do \ case ${file} in \ locale/checkinstall-template.po) ;; \ *) \ out=`echo $file | sed -s 's/po/mo/'` ; \ msgfmt -o ${out} ${file} ; \ if [ $? != 0 ] ; then \ exit 1 ; \ fi ; \ ;; \ esac ; \ done make -C installwatch make[1]: Entering directory `/home/sofiane/checkinstall-1.6.2/installwatch' gcc -Wall -c -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -DVERSION=\"0.7.0beta7\" installwatch.c installwatch.c:2942: error: conflicting types for 'readlink' /usr/include/unistd.h:828: note: previous declaration of 'readlink' was here installwatch.c:3080: error: conflicting types for 'scandir' /usr/include/dirent.h:252: note: previous declaration of 'scandir' was here installwatch.c:3692: error: conflicting types for 'scandir64' /usr/include/dirent.h:275: note: previous declaration of 'scandir64' was here make[1]: *** [installwatch.o] Error 1 make[1]: Leaving directory `/home/sofiane/checkinstall-1.6.2/installwatch' make: *** [all] Error 2 I searched extensively on this issue and this solution looks promising. Should I attempt to install checkinstall as an fpm? What would be the best way to go about that? Centos 6.3 x86_64

    Read the article

  • Enable gzip on Nginx

    - by Rob Wilkerson
    Yes, I know that there are a lot of other questions that seem exactly like this out there. I think I must've looked all of them. Twice. In desparation, I'm adding another in case my specific configuration is the issue. Bear with me. First, the question: What do I need to do to get gzip compression to work? I have an Ubuntu 12.04 server installed running nginx 1.1.19. Nginx was installed with the following packages: nginx nginx-common nginx-full The http block of my nginx.conf looks like this: http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "msie6"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Both PageSpeed and YSlow are reporting that I need to enable compression. I can see that the request headers indicate Accept-Encoding:gzip,deflate,sdch, but the response headers do not have the corollary Content-Encoding header. I've tried various other config values (gzip_vary on, gzip_http_version 1.0, etc.), but no joy. As far as I know, I can only assume that nginx was compiled with compression support, but if there's any way to verify that, I'd love to know. If anyone sees anything I'm missing or can suggest further debugging, please let me know. I'm no sysadmin and I'm new to Nginx so I've exhausted everything I can think of or have read. Thanks.

    Read the article

  • Apache and Virtual Hosts Problem on OS X

    - by Charles Chadwick
    I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

    Read the article

  • Requests per second slower when using nginx for load balancing

    - by Ed Eliot
    I've set up nginx as a load balancer that reverse proxies requests to 2 Apache servers. I've benchmarked the setup with ab and am getting approx 35 requests per second with requests distributed between the 2 backend servers (not using ip_hash). What is confusing me is that if I query either of the backend servers directly via ab I get around 50 requests per second. I've experimented with a number of different values in ab the most common being 1000 requests with 100 concurrent connections. Any idea why traffic distributed across 2 servers would result in fewer requests per second than hitting either directly? Additional info: I've experimented with worker_processes values of between 1 and 8, worker_connections between 1024 and 8092 and have also tried keepalive 0 and 65. My main conf currently looks like this: user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; worker_rlimit_nofile 8192; events { worker_connections 2048; use epoll; } http { include /etc/nginx/mime.types; sendfile on; keepalive_timeout 0; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } I've got one virtual host (in sites available) that redirects everything under / to 2 backends across a local network.

    Read the article

  • Nginx + Ubuntu 9.10, gzip not functioning

    - by Matt
    Hey there, So I installed and configured Nginx 0.7.62 on a new Slicehost Ubuntu 9.10 slice. All seems to work fine with the server, except that gzip isn't working for one reason or another. I made sure that it's setting were correct in /etc/nginx/nginx.conf: user www-data; worker_processes 3; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; keepalive_timeout 2; tcp_nodelay on; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript; gzip_disable "MSIE [1-6]\."; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } This normally wouldn't be a big deal, but gzip support could save considerable bandwidth for my site. Does anyone have any ideas of what to check, or has anyone else run into this problem?

    Read the article

  • Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

    - by clem
    Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. Is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions?

    Read the article

  • Textmate add multiline text at end of line

    - by Yuval
    In Textmate, I am able to add text to several lines at once by clicking and holding the Option key and dragging with the mouse. say I have the following lines: foo 1: foo 2: foo 3: I can easily click and hold option and then drag down with the lines to select the text at the end of each line, and then type "bar" once and it will be added to all lines, as such: foo 1: bar foo 2: bar foo 3: bar Fantastic. The problem I run into, is when my lines aren't the same length, as such foo 19: foo 37842342346: foo 503: Now if I want to add text to the end of each line, I have to either do it manually, or choose enough space so that the longest line is not overwritten, as such: foo 19: bar foo 37842342346: bar foo 503: bar This results in a lot of unwanted whitespace in lines that don't need it. Granted, I could easily run a regular expression search to replace all multiple occurrences of a space with a single one, but I was wondering if there's a way to select all ending of lines at once without having to do that. Any idea? Thanks!

    Read the article

  • All FireFTP passwords gone after auto-update

    - by GitaarLAB
    For the last six months (since the Firefox madness started and they keep on taking control of my PC) I'm terrified to touch Firefox. Problem is however, I've been using it in my business (since once upon a time it was a trustworthy application with useful extensions like FireFTP) and that installation (and plugins) holds four years of information. So Firefox continually deletes my important data (by) messing up (or blocking/or worse: auto-updating) my plug-ins, even crashing my computer as a result. Today Firefox killed FireFTP by (again) autoupdating FireFTP without my permission, and I did my best to disable that nonsense in about:config). Result: none of the (over 100) FireFTP accounts can be logged on to, they suddenly all ask for a password. I do not have the time to to find all of the passwords and reconfigure FireFTP again. How can I undo the mess Firefox created once again? That is, where are the passwords, how do I downgrade? As a side-question, how can I make Firefox behave again? I'm the boss of my computer, not them! How can I once and for-all take back control and completely kill every kind of auto-update feature?

    Read the article

  • Flash Backed Write Cache (FBWC) without capacitor pack

    - by Martyn
    I brought a HP Smart Array P410 controller and it is installed and working fine in a HP Prolient Microserver with 4 drives in two RAID 1 arrays. I didn’t realise however that it came without any cache so would only work by directly writing straight to the disk, and the performance was horrible. So I then brought the 512MB Flash Backed Write Cache (FBWC) memory module as I was under the impression that with FBWC I would not need a battery. I got this idea from a forum post. "What do you guys think of the choice between 'BBWC' (battery backed write cache) and 'FBWC' (flash backed write cache)? The flashed based ones use non-volitile memory so need no battery." After installing the cache module however the server pretty much won’t boot. The P410 has a flashing amber light on it, and from the manual that doesn’t sound good. I’ve managed to get to the on board BIOS once and even managed to get to boot to the HP Array Configuration Utility (ACU) CD once, but every other time the Server continuingly reboots once it get to the POST screen and reads ARRAY INITILIZING %%%. The one time I reached the ACU, it reported a problem with the Cache Module. To me, it seems like the cache module is faulty, however the supplier tells me “Do you have an FBWC battery pack, p/n 587324-001, because that is required for the cache to work. If you have it, please complete an RMA form and we'll send a replacement / credit.” Does this sound right to you? I’ve been ordering the parts from the US and I don’t want to spend $77 + $40 p&p on a battery, wait a week for the shipping to find the card is faulty, and I don’t want to send back a working card?

    Read the article

  • bind9 - forwarders are not working

    - by Sarp Kaya
    I am experiencing an issue with bind. If i want to resolve any domain name that is on the zone file. It works fine. However, when I try to resolve anything that does not belong to the zone file. I know that actual DNS servers that are being forwarded are working fine. But somehow bind9 fails to use them. The content of /etc/bind/named.conf.options is: options { directory "/var/cache/bind"; forwarders { 131.181.127.32; 131.181.59.48; }; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; I have also tried to use only one ip address and it still did not work. also the content of /etc/bind/named.conf is: include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; So there is no problem with including options file. Any recommendations for fixing this problem?

    Read the article

  • Display issue with fresh install of windows server 2012

    - by Tony
    I installed windows server 2012 last night on my home "server". I use server loosely. From the get go I had display and graphic issues. The image was fuzzy and jumbled up during the install. This continued once booted into the install. I did installed Server 2012 twice now as the first time, I only installed "core". I know this is not a busted graphics card because it worked fine in Win7, during boot, and fine in "core" mode. Once booted into "GUI" install of Server 2012, the image was messed up again. To make things even more weird, the windows "loading" screen looks fine. Once the login screen appears the image is fuzzy and jumbled. My guess was that it was a driver issue. I did try to install the win8 x64 drivers from nvidia. This caused the system to become unbootable and I had to restore to a previous working point and uninstall the driver. I did try two different monitors and cables. Also both ports on the back of the video card. I did manage to get RDP running and that works fine. I rarely work directly on this machine but it would be nice to have the option back. Geforce 210, AMD 4600+, 4 gigs of ram.

    Read the article

  • Large scale file replication with an option to "unsubscribe" from a replicated file on a given machine

    - by Alexander Gladysh
    I have a 100+ GB files per day incoming on one machine. (File size is arbitrary and can be adjusted as needed.) I have several other machines that do some work on these files. I need to reliably deliver each incoming file to the worker machines. A worker machine should be able to free its HDD from a file once it is done working with it. It is preferable that a file would be uploaded to the worker only once and then processed in place, and then deleted, without copying somewhere else — to minimize already high HDD load. (Worker itself requires quite a bit of bandwidth.) Please advise a solution that is not based on Java. None of existing replication solutions that I've seen can do the "free HDD from the file once processed" stuff — but maybe I'm missing something... A preferable solution should work with files (from the POV of our business logic code), not require the business logic to connect to some queue or other. (Internally the solution may use whatever technology it needs to — except Java.)

    Read the article

  • Doesn't work Nginx + SSI

    - by boopidoopi
    I have some problems. Nginx doesn't work with SSI. Nginx listens 80 port (frontend), apache2 listens 81 port (backend). That is my nginx configurations: server { listen 80; server_name test.dev www.test.dev; error_log /var/log/nginx/error.log debug; log_subrequest on; location / { ssi on; proxy_pass http://localhost:81; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 15m; client_body_buffer_size 128k; } } SSI include in test.dev index.php: <!--# include virtual="http:test.dev/test.html" -- When I open test.dev/index.php I see clean page. In page source: <!--# include virtual="http:test.dev/test.html" -- So how to enable SSI in nginx? Can you help me?

    Read the article

  • Apache and Virtual Hosts Problem on OS X

    - by Charles Chadwick
    I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

    Read the article

  • Cant configure DNS properly on centos

    - by Nuker
    I am on a VPS i must manage my own. I have network problems because in the last days many of my users report they cant enter my site from my domain and seems like Google and Facebook cant either (this never happened before). However i can enter my site without problems and so many other people as well. So i tested by making a php include like this <?php include 'http://mysite.com/somepage.php'; ?> and i get this error: Warning: include(): php_network_getaddresses: getaddrinfo failed: Name or service not known in I even tried by including content from yahoo.com or facebook and didnt work either. However the includes will work if i use IPs instead of domains. Do i have a DNS problem or something? What can i do to fix it? Im on a Linux 2.6.32-431.11.2.el6.x86_64 on x86_64 CentOS Linux 6.5 I have this on my resolv.conf # Generated by NetworkManager # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com nameserver 8.8.8.8 nameserver 8.8.4.4 Thank you.

    Read the article

  • Questions about NGINX limit_req_zone

    - by Meteor
    I got a problem with NGINX limit_req_zone. Anyone can help? The problem is that, I want to limit user access to some specific URL, for example: /forum.php?mod=forumdisplay? /forum.php?mod=viewthread&*** But, I do want to add an exception for below URL, /forum.php?mod=image&* Below is the location section of my configuration, the problem is that, for URL started with /forum.php?mod=image&*, the limitation is still applied. Any body can help? location ~*^/forum.php?mod=image$ { root /web/www; fastcgi_pass unix:/tmp/nginx.socket; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } location ~*^/(home|forum|portal).php$ { root /web/www; limit_conn addr 5; limit_req zone=refresh burst=5 nodelay; fastcgi_pass unix:/tmp/nginx.socket; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } location ~ \.php$ { root /web/www; fastcgi_pass unix:/tmp/nginx.socket; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; }

    Read the article

  • How do I rsync an entire folder based on the existence of a specific file type in that folder

    - by inquam
    I have a server set up that receives movies to a folder. I then serve these movies using DLNA. But in the initial folder where they end up all kind of files end up. Pictures, music, documents etc. I thought I'd fix this by running the following script inside that folder rsync -rvt --include='*/' --include='*.avi' --include='*.mkv' --exclude='*' . ../Movies/ This works and scans the given folder and moves all the found movies of the given extension types to the Movies folder. But I wonder if there is anyway to tell rsync to if a folder if found that includes a movie of the given extension types, sync the entire folder. Including other files such as .srt. This is to make it easier for me to get subtitles moved along with the movie. I have a solution figured out via a script made in php (yea, I actually do most of my scripting in linux using php... just a habbit that stuck a long time ago). But if rsync can handle it from the start that would be super. Also, I have noticed that this line of rsync actually copies all the root folders in the given folder. If no movie is in the folder it will create an empty folder. How do I prevent rsync from doing this... and saving me the trouble of deleting all folder in Movies that are empty.

    Read the article

  • Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

    - by clem
    Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

    Read the article

  • BIND9 Forwarding by view

    - by Triztian
    Hi I think this is a simple issue, I'd like to forward only to certain IPs in the LAN network, for example I have 2 acl lists: acl "office1" { 192.168.1.15; // With internet access }; acl "production" { 192.168.1.101; // No internet access }; I know that there probably should be more efficient ways to restrict internet access, but at the moment this is what I'd like to try.Here's what I've tried in named.conf.local // Inlcude my acl definitions include "/etc/bind/acls.conf"; view "no-internet" { match-clients { production; }; include "/etc/bind/named.conf.default-zones"; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; } view "internet" { match-clients { office1; }; include "/etc/bind/named.conf.default-zones"; forwarders { 201.56.59.14; // Made Up 201.56.59.15; // Made Up }; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; }; As you can see I want a localdomain.com defined for every computer in my network and forward internet access to the computers in the office but not to the ones on the production floor. I've modified my conf file, however the IP in the "no-internet" acl is able to resolve the domains, even though I've rebooted the computer, flushed the DNS using ipconfig /flushdns and set my DNS Server as the only one, why is this still happening? Thanks in advance.

    Read the article

  • Allow more websocket connections

    - by Switz
    I want to load balance my node.js (DerbyJS to be specific) application on a basic Linode (512MB ram). It can probably take more than one process running at once. The querys/database does not concern me as I'm not doing anything intensive. The problem at the moment is that it can only handle up to ~40 websocket connections at once. I would love if I could get that number in the few hundred+ range. I anticipate a lot of traffic on launch due to the fact that it's a highly niche community with an engaged audience, but after it should be fine with just ~20-40 connections at once, which it handles perfectly as of now. I don't mind spending a bit of money for a week or two worth of running, but I also don't want to switch production environments. How can I test the process to see how many instances I am able to run on the box? Will increasing the number of processes increase the amount of websockets I can handle, or is that a limitation of the server's network? I have an old Macbook Pro running Linux sitting next to me that has 2GB ram and a 2.8 Dual Core Processor. Could I use this to handle some of the extra load? I could probably load balance with nginx to its IP. I'm on a FiOS home network. If you have any suggestions, I'd really appreciate it. Thanks

    Read the article

  • <msbuild/> task fails while <devenv/> succeeds for MFC application in CruiseControl.NET?

    - by ee
    The Overview I am working on a Continuous Integration build of a MFC appliction via CruiseControl.net and VS2010. When building my .sln, a "Visual Studio" CCNet task (<devenv/>) works, but a simple MSBuild wrapper script (see below) run via the CCNet <msbuild/> task fails with errors like: error RC1015: cannot open include file 'winres.h'.. error C1083: Cannot open include file: 'afxwin.h': No such file or directory error C1083: Cannot open include file: 'afx.h': No such file or directory The Question How can I adjust the build environment of my msbuild wrapper so that the application builds correctly? (Pretty clearly the MFC paths aren't right for the msbuild environment, but how do i fix it for MSBuild+VS2010+MFC+CCNet?) Background Details We have successfully upgraded an MFC application (.exe with some MFC extension .dlls) to Visual Studio 2010 and can compile the application without issue on developer machines. Now I am working on compiling the application on the CI server environment I did a full installation of VS2010 (Professional) on the build server. In this way, I knew everything I needed would be on the machine (one way or another) and that this would be consistent with developer machines. VS2010 is correctly installed on the CI server, and the devenv task works as expected I now have a wrapper MSBuild script that does some extended version processing and then builds the .sln for the application via an MSBuild task. This wrapper script is run via CCNet's MSBuild task and fails with the above mentioned errors The Simple MSBuild Wrapper <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Target Name="Build"> <!-- Doing some versioning stuff here--> <MSBuild Projects="target.sln" Properties="Configuration=ReleaseUnicode;Platform=Any CPU;..." /> </Target> </Project> My Assumptions This seems to be a missing/wrong configuration of include paths to standard header resources of the MFC persuasion I should be able to coerce the MSBuild environment to consider the relevant resource files from my VS2010 install and have this approach work. Given the vs2010 msbuild support for visual c++ projects (.vcxproj), shouldn't msbuilding a solution be pretty close to compiling via visual studio? But how do I do that? Am I setting Environment variables? Registry settings? I can see how one can inject additional directories in some cases, but this seems to need a more systemic configuration at the compiler defaults level. Update 1 This appears to only ever happen in two cases: resource compilation (rc.exe), and precompiled header (stdafx.h) compilation, and only for certain projects? I was thinking it was across the board, but indeed it appears only to be in these cases. I guess I will keep digging and hope someone has some insight they would be willing to share...

    Read the article

  • MSBuild: Add additional files to compile without altering the project file

    - by Craig Norton
    After looking around I can't find a simple answer to this problem. I am trying to create an MSBuild file to allow me to easily use SpecFlow and NUnit within Visual Studio 2010 express. The file below is not complete this is just a proof of concept and it needs to be made more generic. <Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <BuildDependsOn> BuildSolution; SpecFlow; BuildProject; NUnit; </BuildDependsOn> </PropertyGroup> <PropertyGroup> <Solution>C:\Users\Craig\Documents\My Dropbox\Cells\Cells.sln</Solution> <CSProject>C:\Users\Craig\Documents\My Dropbox\Cells\Configuration\Configuration.csproj</CSProject> <DLL>C:\Users\Craig\Documents\My Dropbox\Cells\Configuration\bin\Debug\Configuration.dll</DLL> </PropertyGroup> <Target Name="Build" DependsOnTargets="$(BuildDependsOn)"> </Target> <Target Name="BuildSolution"> <MSBuild Projects="$(Solution)" Properties="Configuration=Debug" /> </Target> <Target Name="SpecFlow"> <Exec Command="SpecFlow generateall $(CSProject)" /> </Target> <Target Name="BuildProject"> <MSBuild Projects="$(CSProject)" Properties="Configuration=Debug" /> </Target> <Target Name="NUnit"> <Exec Command='NUnit /run "$(DLL)"' /> </Target> The SpecFlow Task looks in the .csproj file and creates a SpecFlowFeature1.feature.cs. I need to include this file when building the .csproj so that NUnit can use it. I know I could modify (either directly or on a copy) the .csproj file to include the generated file but I'd prefer to avoid this. My question is: Is there a way to use the MSBuild Task to build the project file and tell it to include an additional file to include in the build? Thank you.

    Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >