Search Results

Search found 7583 results on 304 pages for 'roger guess'.

Page 127/304 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• How can I play 24Bit 96000Hz vinyl rips?

  - by Peter

  I am getting music through the Nvidia HDMI but it is all down-sampled to 44000Hz. I have spent at least 3 hours searching for an answer yesterday. I use Pulse Volume and I even changed the default settings in the Pulse folder to 96000 but it does not work. Though 5.1 sound works perfectly. They all work well in Windows 7, but I prefer to use Ubuntu. All the config files for all the programs are in the etc folder, then look in the pulse folder, and there are 3 three files, 2 of these I changed the permissions and I changed 16 and 44000 to 24 and 96000 as I had read in another forum, but it worked for them and not for me. Though 5.1 works as I have special mp4 file that can check each channel. I did alot of restarts and checking after these changes as nothing had happened, my amp tells me the freq of the signal, which does work which I have tested on Windows 7. I have also gone to systems to download the latest driver for mu Nvidia card. But even if it does not work, I guess I can always play Cd's. But I think my player have become more unstable since I changed the configs, so I may uninstall and install Pulse Volume Control again.

  Read the article

• unable remove/reinstall libxss1:amd

  - by mono

  Whenever I try to install anything (software-center or apt-get) I get an error report stating that libxss1:amd is in a "very bad inconsistent state" (translated from german) and that I should reinstall it. That would not bother me much but I am never sure if the stuff I'm trying will be working in the end. It really resists from being repaired apt-get install, apt-get remove, apt-get -f install, and all the usual suspects - nothing works. It always comes to: dpkg: Fehler beim Bearbeiten von libxss1:amd64 (--configure): Paket ist in einem sehr schlechten inkonsistenten Zustand - Sie sollten es nochmal installieren, bevor Sie die Konfiguration versuchen. Fehler traten auf beim Bearbeiten von: libxss1:amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) I posted the error as is, since my translation might not be exact. But I guess you can figure from my text. I found out that this file is the X screen saver. Maybe I should kill it before handling that file. If thats so, than please tell me how. Thanks for your help, thomas

  Read the article

• O'reilly certification in PHP worth it?

  - by editzombie

  I asked this question over on stack overflow but I didn't realise it wasn't really the place for not so technical questions. I've seen quite a few related threads on this forum so I thought I'd try and get some feedback here: This is my first time asking a question on this forum, though I´ve read it a lot. I apologise if this is repeating a thread. I´m interested in getting into web development. I am a video editor by trade but living in Spain the way things are at the moment its very difficult to find work. I have some very basic knowledge of HTML and CSS and a little bit of flash and have designed a few little personal websites myself. I also worked for a online marketing production company where I worked a little on blog design in Blogger amongst other social media. So thats my background, but I´m trying to expand my skills and get into web development as a career or in general part of my skill base, I was thinking particularly about PHP/MySQL. I have worked a little on some of the Lynda.com tutorials and have invested in a book (Sams Teach Yourself PHP, MySQL and Apache). I´m still finding it very difficult to progress. I know I should really try some practice projects (any reccomendations would be welcome). But I was also thinking about doing one of the O´Reilly certification courses and was wondering whether it would be worthwhile for a noob like me. I hear that the courses are associated with an American University which I guess gives it more clout. Any other thoughts you guys have about how to make progress in learning web development would be fantasic. Thanks in advance.

  Read the article

• 3 column layout with css display table, with first row having multiple rows?

  - by Damainman

  I am working on a new website which: Has 3 columns - Each Column being a cell First column has 3 rows (Logo, Nav, icons) - Has a Div with display: table which wraps arround 3 divs with display:table-row. Other two columns only have 1 row. With the middle column being the content area. However since this is my first time using display:table, I am running into some things that aren't so clear to me. I was trying to avoid floating divs. If I need multiple rows with one cell in each row per column, do I embed each cell in a row or just create each row and not declare cells. I understand that browsers automatically create the missing elements but I want to make sure I do this properly to avoid any side effects that might occur due to the browser automatically creating the missing elements. Edit: I think my brain is just over worked, I guess I can accomplish this by just using 3 divs in the first column instead of using a nested table div with the rows. This just popped into my head.

  Read the article

• Poor backlink profile - search rankings not updated for 2+ months

  - by fistameeny

  I am carrying out some work on a website that is a PR2 with a few good quality, relevant backlinks (PR4-6). It has a presence on Twitter that is updated regularly, a Google Places listing, and listings on some decent directories (Qype etc). The site was rebuilt into Drupal 7 two months ago, with all the basics done - URL rewriting, XML Sitemap submitted to Google, and most importantly, good quality, structured content. I've noticed that Google is still showing "old" URL's from the previous version of the site that was ditched 8 weeks ago. I think the site may be penalised under the Penguin update, as a previous SEO company created many low quality links from link farms/directories. My question is what the correct way to deal with this is. Bing Webmaster Tools can "disavow" links, and I guess I can attempt to contact the link farms to have them removed. I've already submitted a request to Google to request that we have the penalty removed as we're trying to tidy up a bad history. We submit updated sitemaps to Google and Bing daily, and have built some further decent quality, relevant links. Is there anything further I can do?

  Read the article

• Randomly Freezes - How Can I Diagnose the Problem?

  - by j0rd4n

  At random times, Ubuntu 10.04 freezes, and I have to do a hard shutdown. It was upgraded from 9.10 which didn't freeze. First, is this is common problem with a quick answer, and if not, what can I do to diagnose it? I've tried checking application/kernel logs, but nothing gives me a clue as to what caused the problem. My guess, is that since the OS froze, no logs could be updated. Ideas? SOLUTION: Solved it. My particular problem was my graphics card (integrated Radeon 9000 series). netconsole revealed I was getting the error: "reserve failed for wait". After trial-and-error, I manually configured my video card and disabled hardware acceleration. Completely fixed the issue. Here is what I did: Manually Created xorg.conf Ubuntu automatically configures xorg.conf and doesn't use a file. To edit this file, you have to tell Ubuntu to explicitly create one and then edit it. Here are the steps: Restart system Hold Shift as GRUB boots Select root terminal in GRUB login menu Execute: X -config xorg.conf.new Copy: cp xorg.conf.new /etc/X11/xorg.conf Disable Hardware Acceleration The following is specific to my Radeon card, but I'm sure other cards have a similar setup. Edit xorg.conf Find "Device" section for graphics card Uncomment "NoAccel" option and set to "True" Save + reboot Hope that helps.

  Read the article

• Is learning C# as a first language a mistake?

  - by JuniorDeveloper1208

  I know there are similar questions on here, which I've read, but I recently read this post by Joel Spolsky: How can I teach a bright person, with no programming experience, how to program? And it got me thinking about my way of learning and whether it might actually be harmful in the long run. I've dabbled with various languages but C# is my first serious one, I've read "Head First C#" and created a few projects. But after reading the post above I've found it a bit disheartening that I may be going about it all wrong, obviously I respect Joel's opinion which is what has thrown me a bit. I've started reading "Code" as recommended in the reading list and I'm finding it pretty hard going, although enjoyable. I feel like it's taken the shine off of my "noobish hacking about" in Visual Studio. So now I'm unsure as to what path I should take? Should I take a step back and follow Joel's advice and start reading? I guess my main aim is just to become a good programmer, like everyone else, but I don't want to be going into bad practice by learning a .NET language when someone who's opinion I respect thinks that it is harmful. Thoughts?

  Read the article

• Setting up group disk quotas

  - by Ray

  I am hoping to get some advice in setting up disk quotas. So, I know about: Adding usrquota and grpquota on to /etc/fstab for the file systems that need to be managed. Using edquota to assign disk quotas to users. However, I need to do the last step for multiple users and edquota seems to be a bit troublesome. One solution that I have found is that I can do: sudo edquota -u foo -p bar. This will copy the disk quota of bar to user foo. I was wondering if this is the best solution? I tried setting up group disk quotas but they don't seem to be working. Are group quotas meant to help in the assignment of the same quota to multiple users? Or are they suppose to give a total limit to a set of users? For example, if users A, B, C are in group X then assigning a quota of 20 GB gives each user 20 GB or does it give 20 GB to the entire group X to divide up? I'm interested in doing the former, but not the latter. Right now, I've assigned group disk quotas and they aren't working. So, I guess it is due to my misunderstanding of group disk quotas... My problem is I want to easily give the same quota to multiple users; any suggestions on the best way to do this out of what I've tried above or anything else I may not have thought of? Thank you!

  Read the article

• Is sending data to a server via a script tag an outdated paradigm?

  - by KingOfHypocrites

  I inherited some old javascript code for a website tracker that submits data to the server using a script url: var src = "http://domain.zzz/log/method?value1=x&value2=x" var e = document.createElement('script'); e.src = src; I guess the idea was that cross domain requests didn't haven't to be enabled perhaps. Also it was written back in 2005. I'm not sure how well XmlHttpRequests were supported at the time. Anyone could stick this on their website and send data to our server for logging and it ideally would work in most any browser with javascript. The main limitation is all the server can do is send back javascript code and each request has to wait for a response from the server (in the form of a generic acknowledgement javascript method call) to know it was received, then it sends the next. I can't find anyone doing this online or any metrics as to whether this faster or more secure than XmlHttpRequests. I don't know if this is just an old way of doing things or it's still the best way to send data to the server when you are mostly trying to send data one way and you need the best performance possible. So in summary is sending data via a script tag an outdated paradigm? Should I abandon in favor of using XmlHttpRequsts?

  Read the article

• Ubuntu 13.10, kernel 3.11 blank screen issue with hybrid graphics

  - by Lagerbaer

  On my HP Envy, which has both an Intel on-chip graphics card and an Nvidia Geforce: *-display UNCLAIMED description: 3D controller product: GK208M [GeForce GT 740M] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:d2000000-d2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:5000(size=128) memory:b2000000-b207ffff *-display description: VGA compatible controller product: 4th Gen Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d3000000-d33fffff memory:c0000000-cfffffff ioport:6000(size=64) I have trouble with all newer kernels. I basically had to install 12.04 LTS and use their 3.5 kernel family to get the system to boot. The 3.8 from 12.10 or the newest 3.11 from Ubuntu 13.10 leave me with a black screen upon boot. On one occasion I did hear the "log in" sound, but the screen did not display anything. I have purged all nvidia drivers so I guess it should just use the intel drivers, but apparently this is all messed up with newer kernel versions. This is different from the other "nvidia boots into blank screen" bug in that I don't rely solely on an nvidia card. Surely the intel on-chip card should be supported and leave me with something different from a blank screen? Again, it only works with kernel versions 3.5.0-41-generic, not with the 3.11.0-12 one that ships with Ubuntu 13.10. When I go into the grub menu and change the boot options from 'quiet splash' to 'nomodeset' I am able to boot the system, but then I don't get any graphics and trying 'sudo service lightdm start' doesn't succeed (I get 100% CPU for apport, but this doesn't do anything either, so I kill it). Help, I'm all out of ideas. EDIT: Let me add that I'm using the EFI boot system and have a dual-boot installation with Windows 8.

  Read the article

• How can I get a user account back?

  - by Ilan

  With all my computers I make one partition for the root and another for /home. This is useful for disasters where I need to reformat the root for ubuntu, but leave my /home data untouched. With the upgrade to 13.10 I had troubles on my wife's computer so I reinstalled 13.10. My own /home files came up, as expected, as if nothing had happened. For my wife, it is a different story - and that is the part where I need help. If I go into Files, computer I can see the home directory. There I can see ilan (my files) and yona (my wife's files). I can open yona, documents and see all her work. This means that all is well and I just need to hook up to her files. So the problem is that I need to create a user called Yona or yona, but something which will get me to exactly the files of interest. I'm not sure if I created her account as standard or an administrator. Is there any way I could tell by looking at the files in /home? I created a new user called Yona as a standard user (hoping that this is the right guess). The account came up as disabled. I pressed on the disabled button so I could change the password. I put in her password but it was refused as too short. Too short, too short, but that is what was used and that is what I need. Can anyone help me before my wife comes home and shoots me? Thanks, Ilan

  Read the article

• Two views of Federation: inside out, and outside in

  - by Darin Pendergraft

  IDM customers that I speak to have spent a lot of time thinking about enterprise SSO - asking your employees to log in to multiple systems, each with distinct hard to guess (translation: hard to remember) passwords that fit the corporate security policy for length and complexity is a strategy that is just begging for a lot of help-desk password reset calls. So forward thinking organizations have implemented SSO for as many systems as possible. With the mix of Enterprise Apps moving to the cloud, it makes sense to continue this SSO strategy by Federating with those cloud apps and services.  Organizations maintain control, since employee access to the externally hosted apps is provided via the enterprise account.  If the employee leaves, their access to the cloud app is terminated when their enterprise account is disabled.  The employees don't have to remember another username and password - so life is good. From the outside in - I am excited about the increasing use of Social Sign-on - or BYOI (Bring your own Identity).  The convenience of single-sign on is extended to customers/users/prospects when organizations enable access to business services using a social ID.  The last thing I want when visiting a website or blog is to create another account.  So using my Google or Twitter ID is a very nice quick way to get access without having to go through a registration process that creates another username/password that I have to try to remember. The convenience of not having to maintain multiple passwords is obvious, whether you are an employee or customer - and the security benefit of not having lots of passwords to lose or forget is there as well. Are enterprises allowing employees to use their personal (social) IDs for enterprise apps?  Not yet, but we are moving in the right direction, and we will get there some day.

  Read the article

• Error -12 hibernation image. Not enough free memory (sometimes)

  - by user99306

  I am having a problem with hibernation in Ubuntu 12.10, it had worked fine in 12.04. When I try and hibernate it sometimes appears to hibernate throws up an error and returns me to the desktop. The error I get is this: PM: Creating hibernation image: PM: Need to copy 375021 pages PM: Normal pages needed: 117957 + 1024, available pages: 110205 PM: Not enough free memory PM: Error -12 creating hibernation image Now I understand what the error means, but it doesn't make sense. My swap file is 5GB and is seldom ever used as I have 4GB of RAM. I know it is recommended to have 1.5 times more swap than RAM etc, but space doesn't seem to be the problem, despite the error. For example, I rarely use more than about 25%-30% of my RAM, yet still have the problem above. Moreover on a fresh boot and login, with no programs open and using only about 12% of RAM, I can get the above error - yet at other times I can hibernate whilst using 25% of my RAM. Also if I keep trying to hibernate, it eventually does after throwing up the above error four or five times. A successful hibernation looks like this: PM: Creating hibernation image: PM: Need to copy 295511 pages PM: Normal pages needed: 95534 + 1024, available pages: 132627 Is there some setting that I need to tweak or something I need to do before hibernating to avoid this problem? I guess the question could be better interpreted as: Is there some way of safely flushing the buffers and the cache before hibernation? Other than attempting to hibernate several times until it is successful! Thanks in advance.

  Read the article

• How to disable the text shadow in plasma widgets KDE 4.6?

  - by piedro

  I just switched completely to Kubuntu for the sake of the more suitable applications for my purposes and their overall integration in the system. But I'm not very happy with all those desktop effects and tranparent looks everywhere. Some things a matter of taste I guess. Some things just unbearable for me having weak eyes. One of them is that about every light theme seems to be using a text shadow effect on the plasma widgets. A white "spilled milk" effect underneath dark text on light grey or glassy background. Drives my eyes nuts! I can remove this effect on the desktop folder by unselecting "shadow" as text effect. I can't find any way to switch it of in the panel and the plasma widgets. My second, related question is, is there a plasma theme matching the oxygen look of the default desktop in light colors that uses the same colors as the ones chosen in the KDE color settings, - simple, opaque, no effects, gnome-like? Plz help someone! thx, piedro

  Read the article

• Interaction between two Clouds

  - by user7969

  I have setup the Cloud-A with 1 - [CLC+CC] and 2 - [NC] computers. I have another Cloud-B with same configuration. [using the Ubuntu Enterprise Cloud] Both of them working fine individually, in the same LAN. Now if I want to add the NC of Cloud-A to CC of Cloud-B, [in case the resources of Cloud-B are exhausted] how can I make it possible ? I guess this calls for the interoperability stuff... Could you please explain what happens exactly when we ask for instance, the direct interaction happens between the client and NC or it goes through the CLC and CC ? What I want to say is, say there are multiple cloud providers. A user is subscribed to any one of them, say Cloud-A for IaaS. As the requirements are dynamic, all the resources of Cloud-A may get exhausted. There may be another Cloud-B which can provide the services but that Cloud-A can't ask the client to go for Cloud-B. So if it is possible to have some co-ordination between this two providers to share resources mutually, making client fully unaware of whats going on in the background....? Please reply.. I am sorry if I'm doing mistake anywhere... Thanks in advance :)

  Read the article

• Games without a(n explicit) game loop

  - by Davy8

  Most game development happens with a main game loop. Are there any good articles/blog posts/discussions about games without a game loop? I imagine they'd mostly be web games, but I'd be interested in hearing otherwise. (As a side note, I think it's really interesting that the concept is almost exclusively used in gaming as far as I'm aware, perhaps that may be another question.) Edit: I realize there's probably a redraw loop somewhere. I guess what I really mean is a loop that is hidden to you. Frames are something you as the developer are not concerned with as you're working on a higher level of abstraction. E.g. someLootItem.moveTo(inventory, someAnimatationType) and that will move from the loot box to your inventory using the specified animation type without the game developer having to worry about the implementation details of that animation. Maybe that's how "real" games end up working, but from reading most tutorials they seem to imply a much more granular level of control is used, but that might just be an artifact of being a tutorial.

  Read the article

• shrink ext4 partition

  - by user276851

  My question is similar to Move ext4 partition, but the challenge I couldn't figure out is how to shrink a partition from the start. So suppose originally the partition (with raid) is like this. (************** /dev/md127 ***************) After resizing, I want to achieve like this. (*** unallocated ***)(**** /dev/md127 ****) Note, I cannot use gparted, and parted does not support ext4. The commands I have tried so far, % resize2fs -p /dev/md127 1676G # <== This is good. % lvreduce -L 1676G /dev/md127 Path required for Logical Volume "md127" Please provide a volume group name Run `lvreduce --help' for more information. Failed here, I guess it may be because the underlying partition is primary and the lvreduce only works on logical? Anyway, no idea. Then after that, I am thinking to create another partition right after this one, copy the data to that partition, and remove this one, like. 1. (************** /dev/md127 ***************) 2. (**** /dev/md127 ****)(*** new partition **) 3. (*** unallocated ****)(**** /dev/md127 ****) Thanks for the help.

  Read the article

• Should I redo an abandoned project with Lightswitch?

  - by Elson

  I had a small project that I was doing on the side. It was basically a couple of forms linked to a DB. Access was out, because it was a specifically meant to be a web application. Being a small project I used ASP.NET Dynamic Data, but, for various reasons, the project ended before deployment. I met the client recently, and he said there was a need for it still. I'm considering restarting the project with Dynamic Data, but I've seen some Lightswitch demos, and was suitably impressed with the BETA. I will wait for RTM if I use it, but is it a good idea to use Lightswitch to replace the Dyanmic Data? The amount of work I put into the Dynamic Data site isn't really an issue. Additional information: It's a system that tracks production in a small factory, broken down by line, machine, section and will generate reports. I would guess that the data structure will remain fairly constant over time, but that the reporting requirements will grow. The other thing is that the factory is part of a larger group, and I'm hopeful that, if this system succeeds, similar work with be forthcoming for other factories.

  Read the article

• Find possible variations of one item out of multiple baskets.

  - by tugberk

  I have three baskets of balls and each of them has 10 balls which have the following numbers: Basket 1: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Basket 2: 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 Basket 3: 21, 22, 23, 24, 25, 26, 27, 28, 29, 30 What would be the possible variations If I were to pick one ball from each basket? I guess this is called as Probability in Mathematics but not sure. How would you write this code in C# (or any other programming language) to get the correct results? Edit: Based on @Kilian Foth's comment, here is the solution in C#: class Program { static void Main(string[] args) { IEnumerable<string> basket1 = new List<string> { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10" }; IEnumerable<string> basket2 = new List<string> { "11", "12", "13", "14", "15", "16", "17", "18", "19", "20" }; IEnumerable<string> basket3 = new List<string> { "21", "22", "23", "24", "25", "26", "27", "28", "29", "30" }; foreach (var item1 in basket1) foreach (var item2 in basket2) foreach (var item3 in basket3) { Console.WriteLine("{0}, {1}, {2}", item1, item2, item3); } Console.ReadLine(); } }

  Read the article

• Moving an object using its velocity on a closed curve

  - by Futaro

  I want that an object follows a path, in Peggle game there are some pegs that have movement in a closed path. How can i get the same result? I guess that I can use parametric curve but I need use the velocity and not the position (x, y). I use NAPE and I have this in my gameloop: //circunference angle = angle + 1*(Math.PI / 180); movableBall.position.x = radius * Math.cos(angle)+ h; movableBall.position.y = radius * Math.sin(angle)+ k; it's works but I can not control the velocity, each movableBall must have its own velocity. Besides, from docs of NAPE:"Setting the position of a body is equivalent to simply teleporting the body; for instance moving a kinematic body by position is not the way to go about things.." I want to use: movableBall.velocity.x =?? movableBall.velocity.y = ?? The final idea is to follow others paths like the Lemniscate of Bernoulli. Thanks!

  Read the article

• Update Manager got stuck (but not frozen) while installing downloaded updates. What should I do?

  - by WarriorIng64

  I have just gotten my Ubuntu 12.04 LTS desktop computer reassembled after a trip back home and connected it to my parent's wireless Internet connection. The connection seems quite shaky (disconnects half the time, likely an ongoing issue with the wireless card I have installed), and it struggled to download updates because of the constant interruptions. Eventually, it managed to download the updated packages and started installing them. I got up and left it to do its work. When I came back, I saw it was still having trouble staying connected to the wireless (no surprise there), but then I noticed that it seemed like Update Manager had stopped making progress on the installation. I opened the Details pane to see what it was last doing: My guess was that the installation script for flashplugin-installer couldn't complete the download until I stabilized the Internet connection. I hooked my Ubuntu laptop up to my desktop via Ethernet and shared its wireless connection using this guide, and as I am typing this now from my desktop you can see that the connection issue was successfully worked around. However, even with a stable connection established, Update Manager seems "stuck" at its current position and won't go any further. It's not totally frozen, but I can't do anything beyond open/close the Details pane as the Cancel button is grayed out. I know it can cause big problems if updates are stopped during installation, but I'm at a loss as to how this situation should be handled. I'm sure it should finish normally if I can just find a way to restart Update Manager, but the question is how this should be approached. How can I safely get my updates to finish installing?

  Read the article

• How to reset the language of the package descriptions

  - by xubuntix

  I have had German as my main language about a year ago. Later I changed it to English. Most parts of the system accepted the change. The notable exceptions are the package descriptions, which remain in German for some packages. You can see in the image (apt-cache and software-center), that while some descriptions are in English, some have remained in German. So the question is: how do I reset this? I guess that there is somewhere a description cache that needs to be told that it should update all descriptions? EDIT: As asked: the output of some language related commands: $ cat /etc/default/locale LANG="en_US.UTF-8" $ apt-config dump | grep Lang Acquire::Languages ""; Acquire::Languages:: "de_DE"; Acquire::Languages:: "de"; Acquire::Languages:: "en"; Acquire::Languages:: "none"; $ locale LANG=de_DE.UTF-8 LANGUAGE=en LC_CTYPE="de_DE.UTF-8" LC_NUMERIC="de_DE.UTF-8" LC_TIME="de_DE.UTF-8" LC_COLLATE="de_DE.UTF-8" LC_MONETARY="de_DE.UTF-8" LC_MESSAGES="de_DE.UTF-8" LC_PAPER="de_DE.UTF-8" LC_NAME="de_DE.UTF-8" LC_ADDRESS="de_DE.UTF-8" LC_TELEPHONE="de_DE.UTF-8" LC_MEASUREMENT="de_DE.UTF-8" LC_IDENTIFICATION="de_DE.UTF-8" LC_ALL= As a note: I'm not sure what each entry means, but some of the de_DE.UTF-8 are probably ok, since I do want paper-sizes, monetary, time, etc. in standard German formats.

  Read the article

• "Misaligned partition" - Should I do repartition (how?)

  - by RndmUbuntuAmateur

  Tried to install Ubuntu 12.04 from USB-stick alongside the existing Win7 OS 64bit, and now I'm not sure if install was completely successful: Disk Utility tool claims that the Extended partition (which contains Ubuntu partition and Swap) is "misaligned" and recommends repartition. What should I do, and if should I do this repartition, how to do it (especially if I would like not to lose the data on Win7 partition)? Background info: A considerably new Thinkpad laptop (UEFI BIOS, if that matters). Before install there were already a "SYSTEM_DRV" partition, the main Windows partition and a Lenovo recovery partition (all NTFS). Now the table looks like this: SYSTEM_DRV (sda1), Windows (sda2), Extended (sda4) (which contains Linux (sda5; ext4) and Swap (sda6)) and Recovery (sda3). Disk Utility Tool gives a message as follows when I select Ext: "The partition is misaligned by 1024 bytes. This may result in very poor performance. Repartitioning is suggested." There were couple of problems during the install, which I describe below, in the case they happen to be relevant. Installer claimed that it recognized existing OS'es fine, so I checked the corresponding option during the install. Next, when it asked me how to allocate the disk space, the first weird thing happened: the installer give me a graphical "slide" allocate disk space for pre-existing Win7 OS and new Ubuntu... but it did not inform me which partition would be for Ubuntu and which for Windows. ..well, I decided to go with the setting installer proposed. (not sure if this is relevant, but I guess I'd better mention it anyway - the previous partition tools have been more self-explanatory...) After the install (which reported no errors), GRUB/Ubuntu refused to boot. Luckily this problem was quite straightforwardly resolved with live-Ubuntu-USB and Boot-Repair ("Recommended repair" worked just fine). After all this hassle I decided to check the partition table "just to be sure"- and the disk utility gives the warning message I described.

  Read the article

• How do I install the latest version of Mupen64?

  - by Uikri

  Alright, I can't figure out how to install Mupen64 on Ubuntu 12.04. I'm gonna be moving in ~2 days with no internet connection for an indefinite amount of time, so that's why I'm asking for answers here instead of figuring it out myself (I don't have time right now to sit and fiddle with figuring out emulators). I'd like to know how to properly install the latest version of Mupen64 (Stable. No beta or anything like that) and how to be able to use a controller with it. I've heard rumor that the latest version of M64 no longer has a GUI, but that there are ways to add a GUI to it after installation, so I'd also like to know how to add the Mupen64Py UI to it. I am not totally Ubuntu savvy. I do not know how to compile stuff from source, I don't necessarily know a lot of terminology, I'm not very handy with the terminal, etc. So it would be helpful if you explain each step in an easy to understand manner. Thanks in advance to anybody who helps out. EDIT: I've already seen How do I install mupen64plus?, just so you guys know. I just need instructions that are more detailed. Also, thanks for the edit, Jorge Castro! I guess I really should have properly formatted my question ^^;

  Read the article

• Copy Ubuntu distro with all settings from one computer to a different one

  - by theFisher86

  I'd like to copy my exact setup from my computer at work to my computer at home. I'm trying to figure out how to go about doing that. So far I've figured this much out. On the source computer run dpkg --get-selections > installed-software and backup the installed-software file Backup /etc/apt/sources.list Backup /usr/share/applications/ to save all my custom Quicklists Backup /etc/fstab to save all my network mounts Backup /usr/share/themes/ to save the customization I've done to my themes I'm also going to backup my entire HOME directory. Once I get to the destination computer I'm going to first do just a fresh install of 11.10 Then I'll copy over my HOME directory, /etc/apt/sources.list, /usr/share/appications, /etc/fstab and /usr/share/themes/ Then I'm going to run dpkg --set-selections < installed-software Followed by dselect That should install all of my apps for me. I'm wondering if there's a way/need to backup dconf and gconf settings from the source computer? I guess that's my ultimate question. I'd also like any notes on anything else that might need backed up as well before I undertake this project. I hope this post is legit, I figured other people would be interested in knowing this process and I don't see any other questions that seem to really document this on here. I'd also like to further this project and have each computer routinely backup all the necessary files so that both computer are basically identical at all times. That's stage 2 though...

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >