Search Results

Search found 8613 results on 345 pages for 'ssl keys'.

Page 127/345 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• Trouble Setting up Open SSH with Putty

  - by warpstack

  I for the life of me can't seem to get openSSH to work on Ubuntu Server 10.10 with keys I generated in PuttyGen on my Windows machine. After hours of trial and error and web searches I can't get my ssh service to accept my private key! Here is my sshd_config. I generated my public and private keys using Putty in Windows then used a ssh connection to paste my key from putty directly into my authorized_keys2 file located in */etc/ssh/publickeys/authorized_keys2* The authorized_keys2 file looks something like: ssh-rsa AAAAB3NzaC1yc2EAAAA... with no email or anything at the end of it. I just pasted it straight from PuttyGen without using a key comment. I feel like it's not working because of some nuance I am not understanding or some unusual setting or incompatibility. I've restarted the ssh service (and the machine) to no avail. What are some common pitfalls I might have gotten myself into? Is there a simpler way to generate ssh keys that putty can use in windows?

  Read the article

• Apache reverse-proxy intermittent error 113 - No route to host

  - by BonkaBonka

  I've got an Apache 2.0.52 server on CentOS 4 that front-ends a couple of App servers (mix of Jetty and Tomcat). Apache has a handful of virtual hosts configured like this: <VirtualHost www1.example.com:443> ServerName www1.example.com DocumentRoot "/mnt/app_web/html" SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateChainFile /etc/httpd/conf/ssl.crt/chain.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 RewriteEngine on RewriteRule ^/app1/(.*)$ http://app1.example.com:8080/app1/$1 [P,L] RewriteRule ^/app2/(.*)$ http://app2.example.com:8080/app2/$1 [P,L] </VirtualHost> However, I'm getting the following errors in the logs intermittently: [Fri Dec 04 07:19:41 2009] [error] (113)No route to host: proxy: HTTP: attempt to connect to 10.0.0.1:8080 (app1.example.com) failed I initially tried turning off IPv6, and that seemed to largely cure it, but I still have sporadic bursts of these messages. Additionally, we're running memcache on same front-end and during the times when I'm getting those messages in Apache's log, the following command doesn't work: echo stats | nc 127.0.0.1 11211 No messages are printed, but neither are the stats printed. I am completely lost as to how to proceed with troubleshooting this. =(

  Read the article

• configuring vsftpd anonymous upload. Creates files but freezes at 0 bytes

  - by Wayne

  vsftpd on ubuntu after sudo apt-get install vsftpd Then did configuration as in the attached /etc/vsftpd.conf file. Anonymous ftp allows cd to the upload directly and allows put myfile.txt which gets created on the server but then the client hangs and never proceeds. The file on the server remains at 0 bytes. Here's the folders and permissions: root@support:/home/ftp# ls -ld . drwxr-xr-x 3 root root 4096 Jun 22 00:00 . root@support:/home/ftp# ls -ld pub drwxr-xr-x 3 root root 4096 Jun 21 23:59 pub root@support:/home/ftp# ls -ld pub/upload drwxr-xr-x 2 ftp ftp 4096 Jun 22 00:06 pub/upload root@support:/home/ftp# Here's the vsftpd.conf file: root@support:/home/ftp# grep -v '#' /etc/vsftpd.conf listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES dirmessage_enable=YES xferlog_enable=YES anon_root=/home/ftp/pub/ connect_from_port_20=YES chown_uploads=YES chown_username=ftp nopriv_user=ftp secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Here's a file example that attempted to upload: root@support:/home/ftp/pub/upload# ls -l total 0 -rw------- 1 ftp nogroup 0 Jun 22 00:06 build.out This is the client attempting to upload...it is frozen at this point: $ ftp 173.203.89.78 Connected to 173.203.89.78. 220 (vsFTPd 2.0.6) User (173.203.89.78:(none)): ftp 331 Please specify the password. Password: 230 Login successful. ftp> put build.out 200 PORT command successful. Consider using PASV. 553 Could not create file. ftp> cd upload 250 Directory successfully changed. ftp> put build.out 200 PORT command successful. Consider using PASV. 150 Ok to send data.

  Read the article

• Postfix not sending email after upgrading to Ubuntu 12.04

  - by Luke

  After upgrading a server from Ubuntu 10.04 to 12.04, postfix is no longer sending email through sendgrid.com. I followed this guide about 6 months ago and everything had been working perfectly until the upgrade. Now it doesn't seem to be authenticating with sendgrid. This is the error I get in my syslog when I try to send an email. May 22 10:19:55 server postfix/smtp[3844]: 983B11C5DA: to=<to address>, relay=smtp.sendgrid.net[174.36.32.204]:587, delay=0.05, delays=0.01/0/0.04/0, dsn=5.0.0, status=bounced (host smtp.sendgrid.net[174.36.32.204] said: 550 Cannot receive from specified address <sendgrid username>: Unauthenticated senders not allowed (in reply to MAIL FROM command)) This is from postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = no config_directory = /etc/postfix header_size_limit = 4096000 inet_interfaces = loopback-only mailbox_size_limit = 0 mydestination = localhost, mylinode.members.linode.com myhostname = hostname mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relayhost = [smtp.sendgrid.net]:587 smtp_sasl_auth_enable = yes smtp_sasl_mechanism_filter = login smtp_sasl_password_maps = hash:/etc/postfix/sasl/sendgrid smtp_sasl_security_options = noanonymous smtp_tls_security_level = may smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Any help would be greatly appreciated. I would be happy to post any other logs or other relevant information.

  Read the article

• OpenVPN server throws an "access denied" error

  - by HackToHell

  OpenVPN refuses to start up and exists with this error ever since i upgraded Ubuntu from 1.04 to 11.10 Dec 14 19:12:38 oogle ovpn-server[32150]: OpenVPN 2.2.0 i686-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jul 4 2011 Dec 14 19:12:38 oogle ovpn-server[32150]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Dec 14 19:12:38 oogle ovpn-server[32150]: Note: cannot open openvpn-status.log for WRITE Dec 14 19:12:38 oogle ovpn-server[32150]: Note: cannot open ipp.txt for READ/WRITE Dec 14 19:12:38 oogle ovpn-server[32150]: Diffie-Hellman initialized with 1024 bit key Dec 14 19:12:38 oogle ovpn-server[32150]: Cannot load private key file server.key: error:0200100D:system library:fopen:Permission denied: error:20074002:BIO routines:FILE_CTRL:system lib: error:140B0002:SSL routines:SSL_CTX_use_PrivateKey_file:system lib Dec 14 19:12:38 oogle ovpn-server[32150]: Error: private key password verification failed Dec 14 19:12:38 oogle ovpn-server[32150]: Exiting Dec 14 19:12:46 oogle ovpn-server[32201]: OpenVPN 2.2.0 i686-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jul 4 2011 Dec 14 19:12:46 oogle ovpn-server[32201]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Dec 14 19:12:46 oogle ovpn-server[32201]: Note: cannot open openvpn-status.log for WRITE Dec 14 19:12:46 oogle ovpn-server[32201]: Note: cannot open ipp.txt for READ/WRITE Dec 14 19:12:46 oogle ovpn-server[32201]: Diffie-Hellman initialized with 1024 bit key Dec 14 19:12:46 oogle ovpn-server[32201]: Cannot load private key file server.key: error:0200100D:system library:fopen:Permission denied: error:20074002:BIO routines:FILE_CTRL:system lib: error:140B0002:SSL routines:SSL_CTX_use_PrivateKey_file:system lib Dec 14 19:12:46 oogle ovpn-server[32201]: Error: private key password verification failed Dec 14 19:12:46 oogle ovpn-server[32201]: Exiting

  Read the article

• Cannot send email outside of network using Postfix

  - by infmz

  I've set up an Ubuntu server with Request Tracker following this guide (the section about inbound mail would be relevant). However, while I'm able to send mail to other users within the network/domain, I cannot seem to reach beyond - such as my personal accounts etc. Now I have no idea what is causing this, I thought that all it takes is for the system to fetch mail through our exchange server and be able to deliver in the same way. However, that hasn't been the case. I have found another server setup in a similar fashion (CentOS 5, Request Tracker but using Sendmail), however it is a dated server and whoever's built it has kindly left no documentation on how it works, making it a pain to use that as a reference system! :) At one point, I was told I need to set up a relay between the local server's email add and our AD server but this didn't seem to work. Sorry, I know next to nothing about mailservers, my colleagues nothing about Linux so it's a hard one for me. Thank you! EDIT: Result of postconf -N with details masked =) alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = myhost.mydomain.com, localhost.mydomain.com, , localhost myhostname = myhost.mydomain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = EXCHANGE IP smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Sample log message: Sep 4 12:32:05 theedgesupport postfix/smtp[9152]: 2147B200B99: to=<[email protected]>, relay= RELAY IP :25, delay=0.1, delays=0.05/0/0/0.04, dsn=5.7.1, status=bounced (host HOST IP said: 550 5.7.1 Unable to relay for [email protected] (in reply to RCPT TO command))

  Read the article

• What is stopping postfix from delivering mail to the local transport agent?

  - by Dark Star1

  I have the following settings ( as grabbed from my postconf -n output) alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix content_filter = smtp-amavis:[127.0.0.1]:10024 inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 maximal_backoff_time = 8000s maximal_queue_lifetime = 7d minimal_backoff_time = 1000s mydestination = $mydomain, localhost.$mydomain, localhost myhostname = //redacted mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_helo_timeout = 60s smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_hard_error_limit = 12 smtpd_recipient_limit = 10 smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_soft_error_limit = 3 smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes unknown_local_recipient_reject_code = 450 virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf, mysql:/etc/postfix/mysql_virtual_alias_domainaliases_maps.cf virtual_gid_maps = static:8 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_domains_maps.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf, mysql:/etc/postfix/mysql_virtual_mailbox_domainaliases_maps.cf virtual_transport = virtual virtual_uid_maps = static:5000 postconf: warning: /etc/postfix/main.cf: unused parameter: virtual_overquota_bounce=yes postconf: warning: /etc/postfix/main.cf: unused parameter: virtual_mailbox_limit_maps=mysql:/etc/postfix/mysql_virtual_mailbox_limit_maps.cf postconf: warning: /etc/postfix/main.cf: unused parameter: virtual_maildir_limit_message=Sorry, the your maildir has overdrawn your diskspace quota, please free up some of spaces of your mailbox try again. postconf: warning: /etc/postfix/main.cf: unused parameter: virtual_create_maildirsize=yes postconf: warning: /etc/postfix/main.cf: unused parameter: virtual_mailbox_extended=yes postconf: warning: /etc/postfix/main.cf: unused parameter: virtual_mailbox_limit_override=yes postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_recipient, reject_unauth_destination, check_policy_service inet:127.0.0.1:10023, permit I am nwe to mail server configurations but as I understand it from this message: status=deferred (mail transport unavailable) It means it can't deliver to the LDA. I am using postifx 2.9.6 on ubuntu 12.04 with dovecot 2.0.19

  Read the article

• Postfix (delivery temporarily suspended: conversation with mydomain.net [private/lmtp] timed out while receiving the initial server greeting)

  - by Paul

  I'm running Debian 7.1, Postfix version 2.9.6, Dovecot Version 2.1.7 To set it up I followed mostly this (without the spamass-clamav-greylist bit) I have also got setup smart host relaying via gmail postconf -n reveals: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 milter_default_action = accept mydestination = MyDomain, localhost.net, localhost myhostname = MyDomain.net mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relay_domains = mysql:/etc/postfix/mysql_relay_domains.cf relayhost = [smtp.gmail.com]:587 smtp_connect_timeout = 120s smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/relay_passwd smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf virtual_gid_maps = static:3000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_mailbox_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_transport = lmtp:unix:private/lmtp virtual_uid_maps = static:3000 I am able to send emails to the outside world but all emails sent to me are getting stuck. mailq is showing numerous lines: A69C2414C4 2621 Fri Dec 27 14:57:03 [email protected] (conversation with MyDomain.net[private/lmtp] timed out while receiving the initial server greeting) [email protected] AB78B414BE 3796 Fri Dec 27 14:56:50 [email protected] (delivery temporarily suspended: conversation with MyDomain.net[private/lmtp] timed out while receiving the initial server greeting) [email protected] /var/log/mail.log is showing: Dec 28 09:50:09 hostname postfix/lmtp[10828]: E947C414CD: to=, relay=localhost[private/lmtp], delay=64012, delays=63712/0.25/300/0, dsn=4.4.2, status=deferred (conversation with localhost[private/lmtp] timed out while receiving the initial server greeting) Any help would be greatly appreciated. Thank you

  Read the article

• Multiple static WAN IP addresses to single LAN subnet

  - by Jessy Houle

  Below is my home network topology. I currently have 5 static IP addresses, 3 of which are in use by 3 routers. These routers in-turn subnet internal networks and port forward. I use my SSL VPN appliance to remote home from work or on the road. At this point I can remotely administer my Windows Server. I know the network is setup wrong, I was matching existing hardware the best I knew how. http://storage.jessyhoule.com.s3.amazonaws.com/network_topology.jpg Ok this said, here is the problem... One of my websites on my Windows Server now needs to be secure (SSL using port 443). However, I'm already port forwarding port 443 to my VPN appliance. Furthermore, if I'm going to have to reconfigure the network, I would really like to be able to use the SSL VPN to remotely administer all machines. I mentioned this to a friend of mine, who said that what I was looking for was a firewall. Explaining that a firewall would take in multiple static (WAN) IP addresses, and still allow all internal devices to be on the same network. So, basically, I could supply my SSL VPN appliance it's very own static (WAN) IP address routing, and yet have it on the same internal network (192.168.1.x) as all my other devices. The first question is... Does this sound right? Secondly, would you suggest anything different? And, finally, what is the cheapest way to do this? I am started down the road of downloading/installing untangle and smoothwall to see if they will do the job, hoping they take multiple static (WAN) IP addresses. Thank you in advance for your answers. -Jessy Houle

  Read the article

• Connection refused after installing vsftp on Ubuntu 8.04 with fail2ban

  - by Patrick

  I have been using an Ubuntu 8.04 server with fail2ban for a while now (12+ months) and using ftp over SSH without any problems. I have a new user that needs to put files onto the server from an IP modem. I have installed vsftp (sudo apt-get install vsftp) and everything installed correctly. I have created an ftp user on the server following this guide. Whenever I try to connect to the server with my ftp program (filezilla) I get an immediate response of: Connection attempt failed with "ECONNREFUSED - Connection refused by server". I have looked into fail2ban and cannot find any problems. The iptables setup is: Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- anywhere anywhere VSFTP config file (commented lines removed) listen=YES anonymous_enable=NO local_enable=YES write_enable=YES dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES chown_uploads=YES chown_username=[username] secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Any ideas on what is preventing access to the server?

  Read the article

• Postfix: How do I Make Email Aliases Work?

  - by Nick

  The documentation claims that I can add aliases in a file (like /etc/postfix/virtusertable) and then use the "virtual_maps" directive to point to it. This does not appear to be working, however. My mail is bouncing with: Recipient address rejected: User unknown in local recipient table; If I mail the user from the server using the mail command, it works. mail myuser The message goes through postfix and inserts itself in the Cyrus inbox correctly. When I use fetchmail to get the user's messages off a pop3 server, postfix fails. The user's email is "[email protected]", but it doesn't seem to be mapping correctly to "myuser", the cyrus mailbox name. /etc/postfix/main.cf myhostname = localhost alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all mailbox_transport = lmtp:unix:/var/run/cyrus/socket/lmtp #lmtp:unix:/var/run/lmtp virtual_alias_domains = mydomain.com virtual_maps = hash:/etc/postfix/virtusertable /etc/fetchmailrc et syslog; set daemon 20; poll "mail.pop3server.com" with protocol pop3 user "[email protected]" password "12345" is "myuser" fetchall keep /etc/postfix/virtusertable [email protected] myuser postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_size_limit = 0 mailbox_transport = lmtp:unix:/var/run/cyrus/socket/lmtp mydestination = localhost myhostname = localhost mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes virtual_alias_domains = mydomain.com Why is it ignoring my alias?

  Read the article

• Juniper’s Network Connect ncsvc on Linux: “host checker failed, error 10”

  - by hfs

  I’m trying to log in to a Juniper VPN with Network Connect from a headless Linux client. I followed the instructions and used the script from http://mad-scientist.us/juniper.html. When running the script with --nogui switch the command that gets finally executed is $HOME/.juniper_networks/network_connect/ncsvc -h HOST -u USER -r REALM -f $HOME/.vpn.default.crt. I get asked for the password, a line “Connecting to…” is printed but then the programm silently stops. When adding -L 5 (most verbose logging) to the command line, these are the last messages printed to the log: dsclient.info state: kStateCacheCleaner (dsclient.cpp:280) dsclient.info --> POST /dana-na/cc/ccupdate.cgi (authenticate.cpp:162) http_connection.para Entering state_start_connection (http_connection.cpp:282) http_connection.para Entering state_continue_connection (http_connection.cpp:299) http_connection.para Entering state_ssl_connect (http_connection.cpp:468) dsssl.para SSL connect ssl=0x833e568/sd=4 connection using cipher RC4-MD5 (DSSSLSock.cpp:656) http_connection.para Returning DSHTTP_COMPLETE from state_ssl_connect (http_connection.cpp:476) DSHttp.debug state_reading_response_body - copying 0 buffered bytes (http_requester.cpp:800) DSHttp.debug state_reading_response_body - recv'd 0 bytes data (http_requester.cpp:833) dsclient.info <-- 200 (authenticate.cpp:194) dsclient.error state host checker failed, error 10 (dsclient.cpp:282) ncapp.error Failed to authenticate with IVE. Error 10 (ncsvc.cpp:197) dsncuiapi.para DsNcUiApi::~DsNcUiApi (dsncuiapi.cpp:72) What does host checker failed mean? How can I find out what it tried to check and what failed? The HostChecker Configuration Guide mentions that a $HOME/.juniper_networks/tncc.jar gets installed on Linux, but my installation contains no such file. From that I concluded that HostChecker is disabled for my VPN on Linux? Are the POST to /dana-na/cc/ccupdate.cgi and “host checker failed” connected or independent? By running the connection over a SSL proxy I found out that the POST data is status=NOTOK (Funny side note: the client of the oh-so-secure VPN does not validate the server’s SSL certificate, so is wide open to MITM attacks…). So it seems that it’s the client that closes the connection and not the server.

  Read the article

• only root can send out mail by postfix

  - by Arash

  I have postfix installed and running. The problem is only root can send email. other users failed to do. Here is the log for user www-data which is a web server application. (the same error for other users) postfix/smtp[32003]: 513765FEB9: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:11125, delay=2.1, delays=0.07/0/1.7/0.32, dsn=5.0.0, status=bounced (host 127.0.0.1[127.0.0.1] said: 550-Verification failed for <[email protected]> 550-Unrouteable address 550 Sender verify failed (in reply to RCPT TO command)) here is the /etc/postfix/main.cf: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = $myhostname, localhost.$mydomain, localhost relayhost = [127.0.0.1]:11125 smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/lizard_password smtp_sasl_security_options = mynetworks = 127.0.0.1/8 [::ffff:127.0.0.1]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only myorigin = /etc/mailname mydestination = $myhostname, localhost.$mydomain, localhost inet_protocols = ipv4 smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_destination and here is the section that I added to the /etc/stunnel/stunnel.conf: [smtp-tls-wrapper] accept = 11125 client = yes connect = smtp.mydomain.com:465 I appreciate any help.

  Read the article

• Why can't I see all of the client certificates available when I visit my web site locally on Windows 7 IIS 7?

  - by Jay

  My team has recently moved to Windows 7 for our developer machines. We are attempting to configure IIS for application testing. Our application requires SSL and client certificates in order to authenticate. What I've done: I have configured IIS to require SSL and require (and tried accept) certificates under SSL Settings. I have created the https binding and set it to the proper server certificate. I've installed all the root and intermediate chain certificates for the soft certificates properly in current user and local machine stores. The problem When I browse to the web site, the SSL connection is established and I am prompted to choose a certificate. The issue is that the certificate is one that is created by my company that would be invalid for use in the application. I am not given the soft certificates that I have installed using MMC and IE. We are able to utilize the soft certs from our development machines to our Windows 2008 servers that host the application. What I did: I have attempted to copy the Root CA to every folder location for the Current User and Location Machine account stores that the company certificate's root is in. My questions: Could I be mishandling the certs anywhere else? Could there be a local/group policy that could be blocking the other certs from use? What (if anything) should have to be done differently on Windows 7 from 2008 in regards to IIS? Thanks for your help.

  Read the article

• _default_ VirtualHost overlap on port 443, the first has precedence

  - by Mohit Jain

  I have two ruby on rails 3 applications running on same server, (ubuntu 10.04), both with SSL. Here is my apache config file: <VirtualHost *:80> ServerName example1.com DocumentRoot /home/me/example1/production/current/public </VirtualHost> <VirtualHost *:443> ServerName example1.com DocumentRoot /home/me/example1/production/current/public SSLEngine on SSLCertificateFile /home/me/example1/production/shared/example1.crt SSLCertificateKeyFile /home/me/example1/production/shared/example1.key SSLCertificateChainFile /home/me/example1/production/shared/gd_bundle.crt SSLProtocol -all +TLSv1 +SSLv3 SSLCipherSuite HIGH:MEDIUM:!aNULL:+SHA1:+MD5:+HIGH:+MEDIUM </VirtualHost> <VirtualHost *:80> ServerName example2.com DocumentRoot /home/me/example2/production/current/public </VirtualHost> <VirtualHost *:443> ServerName example2.com DocumentRoot /home/me/example2/production/current/public SSLEngine on SSLCertificateFile /home/me/example2/production/shared/iwanto.crt SSLCertificateKeyFile /home/me/example2/production/shared/iwanto.key SSLCertificateChainFile /home/me/example2/production/shared/gd_bundle.crt SSLProtocol -all +TLSv1 +SSLv3 SSLCipherSuite HIGH:MEDIUM:!aNULL:+SHA1:+MD5:+HIGH:+MEDIUM </VirtualHost> Whats the issue: On restarting my server it gives me some output like this: * Restarting web server apache2 [Sun Jun 17 17:57:49 2012] [warn] _default_ VirtualHost overlap on port 443, the first has precedence ... waiting [Sun Jun 17 17:57:50 2012] [warn] _default_ VirtualHost overlap on port 443, the first has precedence On googling why this issue is coming I got something like this: You cannot use name based virtual hosts with SSL because the SSL handshake (when the browser accepts the secure Web server's certificate) occurs before the HTTP request, which identifies the appropriate name based virtual host. If you plan to use name-based virtual hosts, remember that they only work with your non-secure Web server. But not able to figure out how to run two ssl application on same server. Can any one help me?

  Read the article

• How can I "filter" postfix-generated bounce messages?

  - by Flimzy

  We are using postfix 2.7 and custom SMTPD (based on qpsmtpd) in highly customized configuration for spam filtering. We have a new requirement to filter postfix-generated bounces through our custom qpsmtpd process (not so much for content filtering, but to process these bounces accordingly). Our current configuration looks (in part) like this: main.cf (only customizations shown): 2526 inet n - - - 0 cleanup pickup fifo n - - 60 1 pickup -o content_filter=smtp:127.0.0.2 Our smtpd injects messages to postfix on port 2526, by speaking directly to the cleanup daemon. And the custom pickup command instructs postfix to hand off all locally-generated mail (from cron, nagios, or other custom scripts) to our custom smtpd. The problem is that this configuration does not affect postfix generated bounce messages, since they do not go through the pickup daemon. I have tried adding the same content_filter option to the bounce daemon commands, but it does not seem to have any effect: bounce unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 defer unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 trace unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 For reference, here is my main.cf file, as well: biff = no # TLS parameters smtpd_tls_loglevel = 0 smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache smtp_tls_security_level = may mydestination = $myhostname alias_maps = proxy:pgsql:/etc/postfix/dc-aliases.cf transport_maps = proxy:pgsql:/etc/postfix/dc-transport.cf # This is enforced on incoming mail by QPSMTPD, so this is simply # the upper possible bound (also enforced in defaults.pl) message_size_limit = 262144000 mailbox_size_limit = 0 # We do our own message expiration, but if we set this to 0, then postfix # will try each mail delivery only once, so instead we set it to 100 days # (which is the max postfix seems to support) maximal_queue_lifetime = 100d hash_queue_depth = 1 hash_queue_names = deferred, defer, hold I also tried adding the internal_mail_filter_classes option to main.cf, but also tono affect: internal_mail_filter_classes = bounce,notify I am open to any suggestions, including handling our current content-filtering-loop in a different way. If it's not clear what I'm asking, please let me know, and I can try to clarify.

  Read the article

• OpenSSL error while running punjab

  - by Hunt

  i ran punjab - BOSH connection manager - using twistd -y punjab.tac command in my centos but i am getting following error Unhandled Error Traceback (most recent call last): File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 652, in run runApp(config) File "/usr/local/lib/python2.7/site-packages/twisted/scripts/twistd.py", line 23, in runApp _SomeApplicationRunner(config).run() File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 386, in run self.application = self.createOrGetApplication() File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 451, in createOrGetApplication application = getApplication(self.config, passphrase) --- <exception caught here> --- File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 462, in getApplication application = service.loadApplication(filename, style, passphrase) File "/usr/local/lib/python2.7/site-packages/twisted/application/service.py", line 405, in loadApplication application = sob.loadValueFromFile(filename, 'application', passphrase) File "/usr/local/lib/python2.7/site-packages/twisted/persisted/sob.py", line 210, in loadValueFromFile exec fileObj in d, d File "punjab.tac", line 39, in <module> '/etc/pki/tls/cert.pem', File "/usr/local/lib/python2.7/site-packages/twisted/internet/ssl.py", line 68, in __init__ self.cacheContext() File "/usr/local/lib/python2.7/site-packages/twisted/internet/ssl.py", line 78, in cacheContext ctx.use_privatekey_file(self.privateKeyFileName) OpenSSL.SSL.Error: [('x509 certificate routines', 'X509_check_private_key', 'key values mismatch')] Failed to load application: [('x509 certificate routines', 'X509_check_private_key', 'key values mismatch')] my configuration file of punjab is sslContext = ssl.DefaultOpenSSLContextFactory( '/etc/pki/tls/private/ca.key', '/etc/pki/tls/cert.pem', ) How can i resolve above error

  Read the article

• Apache Named Virtual Hosts and HTTPS

  - by Freddie Witherden

  I have an SSL certificate which is valid for multiple (sub-) domains. In Apache I have configured this as follows: In /etc/apache2/apache2.conf NameVirtualHost <my ip>:443 Then for one named virtual host I have <VirtualHost <my ip>:443> ServerName ... SSLEngine on SSLCertificateFile ... SSLCertificateKeyFile ... SSLCertificateChainFile ... SSLCACertificateFile ... </VirtualHost> Finally, for every other site I want to be accessible over HTTPS I just have a <VirtualHost <my ip>:443> ServerName ... </VirtualHost> The good news is that it works. However, when I start Apache I get warning messages [warn] Init: SSL server IP/port conflict: Domain A:443 (...) vs. Domain B:443 (...) [warn] Init: SSL server IP/port conflict: Domain C:443 (...) vs. Domain B:443 (...) [warn] Init: You should not use name-based virtual hosts in conjunction with SSL!! So, my question is: how should I be configuring this? Clearly from the warning messages I am doing something wrong (although it does work!), however, the above configuration was the only one I could get to work. It is somewhat annoying as the configuration files have an explicit dependence on my IP address.

  Read the article

• Reading email from Emacs VM using a secure server (Gmail)

  - by Alan Wehmann

  This is a question (see below) originally entered at https://answers.launchpad.net/vm/+question/108267 and upon the recommendation of Uday Reddy the question and answers are being moved here. The date of the original question was May 4, 2010. One subject of the question is use of the program stunnel with program View Mail (run within Emacs) on a PC running Microsoft Windows, in order to read email from a server that requires use of TSL/SSL (Gmail). See the related question, How to configure Emacs smtp for secure server for using a secure server, for sending email. The programs discussed are Emacs, VM (ViewMail) and stunnel. The platform under discussion is MS Windows. The original question was asked by usr345 on 2010-04-24: I tried to install vm on Windows, but when I tried to get the mail from gmail using ssl, an error emerges, emacs hanges-up. Here is the code from .emacs: (add-to-list 'load-path (expand-file-name "~/vm/lisp")) (add-to-list 'Info-default-directory-list (expand-file-name "~/vm/info")) (require 'vm-autoloads) (setq vm-primary-inbox "~/mail/inbox.mbox") (setq vm-crash-box "~/mail/inbox.crash.mbox") (setq vm-spool-files `((,vm-primary-inbox "pop-ssl:pop.gmail.com:995:pass:usr345:PASSWORD" ,vm-crash-box))) (setq vm-stunnel-program "g:/program files/stunnel/stunnel.exe") So, the question: How to configure pop-ssl on Windows?

  Read the article

• How does rsync --daemon know which way it is being run?

  - by Skaperen

  I am wanting to run rsync over an SSL/TLS encrypted connection. It does not do this directly so I am exploring options. The stunnel program looks promising, although more complicated than designed due to the need to hop connections with the -r option. However, I do find there is a -l option to run a program. I am assuming this works by having two processes, one to carry out the SSL/TLS work, and one to be the worker which the client is communicating to. These would then communicate by a pipe pair or two way socket between them. What struck me as odd when I surveyed a number of web pages to see how to properly set this up is that whether running as a standalone daemon, or under a super daemon like inetd, the arguments for rsync are the same. How does rsync --daemon know whether it should open a socket and listen on it for many connections, or just service one connection by communicating with the stdin/stdout descriptors is has when it starts up (which really would go through the extra process to handle the encryption, description, and SSL/TLS protocol layer)? And then I need to find a way to wrap the client to have it do SSL/TLS in one simple command (as opposed to connection hopping that stunnel seems to favor).

  Read the article

• Can nginx be an mail proxy for a backend server that does not accept cleartext logins?

  - by 84104

  Can Nginx be an mail proxy for a backend server that does not accept cleartext logins? Preferably I'd like to know what directive to include so that it will invoke STARTTLS/STLS, but communication via IMAPS or POP3S is sufficient. relevant(?) section of nginx.conf mail { auth_http localhost:80/mailproxy/auth.php; proxy on; ssl_prefer_server_ciphers on; ssl_protocols TLSv1 SSLv3; ssl_ciphers HIGH:!ADH:!MD5:@STRENGTH; ssl_session_cache shared:TLSSL:16m; ssl_session_timeout 10m; ssl_certificate /etc/ssl/private/hostname.crt; ssl_certificate_key /etc/ssl/private/hostname.key; imap_capabilities "IMAP4rev1" "UIDPLUS"; server { protocol imap; listen 143; starttls on; } server { protocol imap; listen 993; ssl on; } pop3_capabilities "TOP" "USER"; server { protocol pop3; listen 110; starttls on; pop3_auth plain; } server { protocol pop3; listen 995; ssl on; pop3_auth plain; } }

  Read the article

• OpenSSL force client to use specific protocol

  - by Ex Umbris

  When subversion attempts to connect to an https URL, the underlying protocol library (openssl) attempts to start the secure protocol negotiation at the most basic level, plain SSL. Unfortunately, I have to connect to a server that requires SSL3 or TLS1, and refuses to respond to SSL or SSL2. I’ve done some troubleshooting using s_client and confirmed that if I let s_client start with the default protocol the server never responds to the CLIENT HELLO: $ openssl s_client -connect server.domain.com:443 CONNECTED(00000003) write:errno=104 --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 0 bytes and written 320 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE --- Watching this in Wireshark I see: Client Server -------syn----------> <------ack----------- ---CLIENT HELLO-----> <------ack----------- [60 second pause] <------rst----------- If I tell s_client to use ssl2 the server immediately closes the connection. Only ssl3 and tls1 work. Is there any way to configure openssl to skip SSL and SSL2, and start the negotiation with TLS or SSL3? I've found the OpenSSL config file, but that seems to control only certificate generation.

  Read the article

• Sendmail Configuration for Exchange Server

  - by user119720

  i need help for sendmail configuration in our linux machine. Here the things: I want to send email to outside by using our exchange server as the mail relay.But when sending the email through the server,it will response "user unknown".To make it worse, it will bounce back all the sent message to my localhost. I already tested our configuration by using external mail server such as gmail and yahoo,the configuration is working without any issue and the email can be sent to the recipient.Most of the configuration of my sendmail is based on here. authinfo file : AuthInfo:my_exchange_server "U:my_name" "I:my_email" "P:my_passwd" "M:PLAIN LOGIN" AuthInfo:my_exchange_server:587 "U:my_name" "I:my_email" "P:my_passwd" "M:PLAIN LOGIN" sendmail.mc : FEATURE(authinfo,hash /etc/mail/authinfo.db) define(`SMART_HOST', `my_exchange server')dnl define('RELAY_MAILER_ARGS', 'TCP $h 587') define('ESMTP_MAILER_ARGS', 'TCP $h 587') define('confCACERT_PATH', '/usr/share/ssl/certs') define('confCACET','/usr/share/ssl/certs/ca-bundle.crt') define('confSERVER_CERT','/usr/share/ssl/certs/sendmail.pem') define('confSERVER_KEY','/usr/share/ssl/certs/sendmail.pem') define('confAUTH_MECHANISMS', 'EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN') TRUST_AUTH_MECH('EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN') define('confAUTH_OPTIONS, 'A')dnl My first assumptions the problem occur is due to the authentication problem, as exchange server need encrypted authentication (DIGEST-MD5).I have already changed this in the authinfo file (from plain login to digest-md5 login) but still not working. I also can telnet our exchange server.So the port is not being blocked by firewall. Can someone help me out with this problems?I'm really at wits ends. Thanks.

  Read the article

• Dovecot starting and running, but not listening on any port

  - by Dženis Macanovic

  Among others things I'm in charge of a Debian GNU/Linux (Wheezy) DomU for the mail services of the company i work for. Yesterday one HDD that was used for this particular server has died. After installing Debian again, Dovecot decided to no longer listen on any ports (checked with netstat -l). Other services (like Postfix and MySQL) work without problems. dovecot -n: # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-3-amd64 x86_64 Debian wheezy/sid ext3 auth_mechanisms = plain login disable_plaintext_auth = no first_valid_uid = 150 last_valid_uid = 150 mail_gid = mail mail_location = maildir:/var/vmail/%d/%n mail_uid = vmail namespace inbox { inbox = yes location = prefix = } pass db { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = mail mode = 0666 user = vmail } } service imap-login { inet_listener imaps { port = 993 ssl = yes } } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/ssl/private/mail.crt ssl_key = </etc/ssl/private/mail.key userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol imap { mail_max_userip_connections = 25 } UID 150 is vmail (I double checked file permissions). I didn't install Dovecot from source, but via apt from the official Debian US mirror. There are no messages concerning Dovecot in /var/log/syslog except for: Oct 21 06:36:29 server dovecot: master: Dovecot v2.1.7 starting up (core dumps disabled) Any ideas?

  Read the article

• How to convert pitch and yaw to x, y, z rotations?

  - by Aaron Anodide

  I'm a beginner using XNA to try and make a 3D Asteroids game. I'm really close to having my space ship drive around as if it had thrusters for pitch and yaw. The problem is I can't quite figure out how to translate the rotations, for instance, when I pitch forward 45 degrees and then start to turn - in this case there should be rotation being applied to all three directions to get the "diagonal yaw" - right? I thought I had it right with the calculations below, but they cause a partly pitched forward ship to wobble instead of turn.... :( So my quesiton is: how do you calculate the X, Y, and Z rotations for an object in terms of pitch and yaw? Here's current (almost working) calculations for the Rotation acceleration: float accel = .75f; // Thrust +Y / Forward if (currentKeyboardState.IsKeyDown(Keys.I)) { this.ship.AccelerationY += (float)Math.Cos(this.ship.RotationZ) * accel; this.ship.AccelerationX += (float)Math.Sin(this.ship.RotationZ) * -accel; this.ship.AccelerationZ += (float)Math.Sin(this.ship.RotationX) * accel; } // Rotation +Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.J)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * accel; } // Rotation -Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.K)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * -accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * -accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * -accel; } // Rotation +X / Pitch if (currentKeyboardState.IsKeyDown(Keys.F)) { this.ship.RotationAccelerationX += accel; } // Rotation -X / Pitch if (currentKeyboardState.IsKeyDown(Keys.D)) { this.ship.RotationAccelerationX -= accel; } I'm combining that with drawing code that does a rotation to the model: public void Draw(Matrix world, Matrix view, Matrix projection, TimeSpan elsapsedTime) { float seconds = (float)elsapsedTime.TotalSeconds; // update velocity based on acceleration this.VelocityX += this.AccelerationX * seconds; this.VelocityY += this.AccelerationY * seconds; this.VelocityZ += this.AccelerationZ * seconds; // update position based on velocity this.PositionX += this.VelocityX * seconds; this.PositionY += this.VelocityY * seconds; this.PositionZ += this.VelocityZ * seconds; // update rotational velocity based on rotational acceleration this.RotationVelocityX += this.RotationAccelerationX * seconds; this.RotationVelocityY += this.RotationAccelerationY * seconds; this.RotationVelocityZ += this.RotationAccelerationZ * seconds; // update rotation based on rotational velocity this.RotationX += this.RotationVelocityX * seconds; this.RotationY += this.RotationVelocityY * seconds; this.RotationZ += this.RotationVelocityZ * seconds; Matrix translation = Matrix.CreateTranslation(PositionX, PositionY, PositionZ); Matrix rotation = Matrix.CreateRotationX(RotationX) * Matrix.CreateRotationY(RotationY) * Matrix.CreateRotationZ(RotationZ); model.Root.Transform = rotation * translation * world; model.CopyAbsoluteBoneTransformsTo(boneTransforms); foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.World = boneTransforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } mesh.Draw(); } }

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >