Search Results

Search found 45894 results on 1836 pages for 'super'.

Page 127/1836 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

  • eMachine W5243 won't POST; fans run but optical drive will not open.

    - by NicciAdonai
    Symptoms are what is described in the title. The machine reacts to the power button being hit by spinning up the two fans: CPU and PSU. The hard drive (SATA) spins up as well. No other reaction. This one symptom is particularly weird, though: the optical drive will not open with the IDE cable attached, but if I unplug it from the mobo it will. I can turn the PC on with it attached, won't open; then unplug IDE while it is still on, WILL open; then plug IDE back in with the PC STILL ON, WON'T open. I have disconnected every peripheral unnecessary to POST. These include: mouse/keyboard, PCI modem, the IDE optical drive (power and data), and the SATA HDD (power and data). Video is onboard. The only two things connected are DB15 video and power cable. There were 2 512 MB DDR2 sticks of RAM in it. I have tried running it with just one of them, then switched the other in. Currently seated is a completely different 1 GB stick that I keep around for troubleshooting purposes, and I have tried it in both slots. I have replaced the CMOS battery with a used one I had lying around, and which worked in the computer it came out of. I have tested the PSU with a tester to confirm it was good, then tried connecting another PSU just in case--same symptoms. I have even tried a suggestion I found elsewhere on this site wherein one disconnects power from the PSU and then presses the PC's power button twice, thereby "resetting" the PSU. Currently I am trying yet another suggestion: turn it on and wait an inordinate amount of time for POST. Any help would be appreciated.

    Read the article

  • Windows Server 2000 Fax Problem

    - by Donald
    I am running a server on Windows 2000 Server and recently set it up to receive faxes. It received one and saved it successfully. However, I want to send that faxes to 2 computers running Outlook 2000/2003 and Windows XP. How can I do this? Your help is much appreciated.

    Read the article

  • Dell 15Z. Trying to output image using Mini Displayport to a Yamasaki Q270. (2560 x 1440) rez monitor. Dual DVI-D to Mini Displayport

    - by michaelcku
    I have a Dell 15Z. GT525M Video card. Updated Driver via NVIDIA. Problem is I just purchased a Yamasaki Catleap Q270 monitor. It is a (2560x1440) monitor with only a Dual DVI-D out. 15Z only has HDMI and a Mini Display Port. I got a Active Dual DVI-D to Mini Display Port Active Adapter(Linked Below). http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802&p_id=6904&seq=1&format=2 The Setup works when i plug it into my Macbook air 13.3. However when I plug it into my 15Z it doesn't work. Tried everything I can thank of. Window control P. FN and F1. It just doesn't work. I believe the issue lies in the Mini Display Port but i can't be sure. No matter what i do, the Mini Display Port doesn't get recognized. Spent 3 hours on the phone with the XPS Tech team. They simply said it was not compatible.... Any help or suggestion would be greatly appreciated.

    Read the article

  • Alpha plugin in GStreamer not working

    - by Miguel Escriva
    Hi! I'm trying to compose two videos, and I'm using the alpha plug-in to make the white color transparent. To test the alpha plug-in I'm creating the pipeline with gst-launch. The first test I done was: gst-launch videotestsrc pattern=smpte75 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ videotestsrc pattern=snow ! mixer. and it works great! Then I created two videos with those lines: gst-launch videotestsrc pattern=snow ! ffmpegcolorspace ! theoraenc ! oggmux ! filesink location=snow.ogv gst-launch videotestsrc pattern=smpte75 ! ffmpegcolorspace ! theoraenc ! oggmux ! filesink location=bars75.ogv And changed the videotestsrc to a filesrc and it continues working gst-launch filesrc location=bars75.ogv ! decodebin2 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ filesrc location=snow.ogv ! decodebin2 ! alpha ! mixer. But, when I use the ideo I want to compose, I'm not able to make the white color transparent gst-launch filesrc location=video.ogv ! decodebin2 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ filesrc location=snow.ogv ! decodebin2 ! alpha ! mixer. Can you help me? Any idea what is happening? I'm using GStreamer 0.10.28 You can download the test videos from here: http://polimedia.upv.es/pub/gst/gst.zip Thanks in advance, Miguel Escriva

    Read the article

  • Asus WL-520GU conflicting subnet (and/or IP) with 2Wire DSL

    - by Paula
    I have an Asus wireless router: WL-520GU... and an AT&T 2Wire for my DSL connection. When I try to browse anywhere, I just get an odd message from the Asus router (in the common Asus broken-English, bad formatting, and awful spelling): http://postimage.org/image/upxrjflcj I guess it's trying to say: Your Asus Router and your 2Wire have the same subnet mask. (It doesn't say if that's good, or bad... but it sounds like they must be different.) but... But for the "solution" it looks like it's trying to say: Your Asus Router and your 2Wire have the same IP address. My Asus has the defaults: 192.168.1.1 and 255.255.255.0 My 2Wire has: 192.168.1.66 I'm not seeing where the conflict(s) could be. The Asus firmware is v3.0.0.14 . None of these problems occur with the old v3.0.0.8 firmware. Any ideas on how to fix this? (PLEASE don't say to run a totally different DD/Tomato firmware because it's "better". I need to fix THIS 1 problem, not try to convince my company to switch everything to an entirely different set of problems.)

    Read the article

  • How can I quickly zoom in on the Mac OS X version of Word without having to use the menu?

    - by Lloyd
    (I'm using the Mac version MS Word 2011) I used to happily use the wheel mouse to zoom but, after upgrading to the Mac Magic mouse (using only finger slide movement to scroll and pan) I can no longer hold Ctrl and roll the mouse to zoom (driving me crazy) and I can't see a useful keyboard shortcut and the zoom slider bar in the lower right of the Word screen isn't practical (in my experience). Is there any way to zoom in on the Mac Version of Microsoft Word 2011 without resorting to using a menu?

    Read the article

  • Blank Screen After Login on Windows 7

    - by Leigh Riffel
    When unlocking a Windows 7 computer the screen briefly (less than a second) goes blank before showing the screen. Abound once a month (but sometimes within a few days) when I unlock my computer the screen doesn't come back from this brief blackout and stays black. Sometimes after five minutes or so the display will come back. Other times it has been blank for over 20 minutes, so I give up and restart the computer. It seems to happen more often when the computer has been locked for a longer period of time - I lock my computer several times a day, but the problem most happens when I come in at the start of the day. I have updated my video card and monitor drivers. I have two monitors driven by the same graphics card. The computer is a Dell Optiplex 740. When the problem occurs both monitors have a green light on to indicate that they are receiving signal. I've tried unplugging the monitors from the video card and turning the monitors on and off. The screen saver is set to one that is not blank screen. The Windows power settings are set to never turn off the display. When the problem occurs there is no significant disk activity occurring. When the problem occurs I can connect over the network to the hard drive on my computer. When the problem occurs I can't connect over the network with a VNC connection. The VNC client doesn't give an error, but also won't show the screen. The task actually seems to hang as I can see the task, but there is no window for it. This problem occurred when I was running a pre-release version of Windows 7. The hard drive was formatted for release version and the problem still occurs. I've been stopping some of my always running programs to see if one of them may be the culprit, but given the span between failures that will take some time to find the problem if it will even help at all. Some programs I have always running include IE, Firefox, Outlook, Evernote, Kana Reminder, Ditto, Macro Express, Timesnapper, and DisplayFusion. Any ideas appreciated.

    Read the article

  • How to automatically remove Flash history/privacy trail? Or stop Flash from storing it?

    - by Arjan van Bentem
    Many people have heard about third-party cookies, and some browsers even block those by default. Some people may even be using Private Browsing modes. However, only few seem to realise that Adobe's Flash player also leaves a cross-browser trail on your local hard drive, and allows for sending cookie-like information back to the server, including third-party sites. And because it is a plugin, Flash does not take any of the browser's privacy settings into account. Sorry for the long post, but first some details about why using Flash raises a privacy concern, followed by the results of my tests: The Flash player keeps a cross-browser history of the domain names of the Flash-sites your computer has visited. Unlike your browser's history, this history is not limited to a certain number of days. History is also recorded while using so-called Private Browsing modes. It is stored on your hard drive (though, as described below, without going to Adobe's site you won't know what is stored). I am not sure if any date and time information is kept about each visit, but to see the domain names: right-click on some Flash content, open the settings dialog, and click the Help icon or click the Advanced button within the Privacy tab. This opens a browser to the help pages on Adobe.com, where one can click through to the Website Storage Settings panel. One can clear the existing list, but one cannot stop it from being recorded again. Flash allows for storing data on your local hard drive, using so-called Local Shared Objects (aka "Flash Cookies"). Just like HTTP cookies, this data can be sent back to the server, for tracking purposes. They are cross-browser, have no expiration date, and no user defined maximum lifetime can be set in the Flash preferences either. These not being HTTP cookies, they are (of course) not blocked by a browser's cookies preferences and are not removed when the normal HTTP cookies are deleted. Adobe has announced that version 10.1 will obey Private Browsing in most popular browsers, but unfortunately no word about also removing the data whenever normal cookies are deleted manually. And its implementation might be confusing: [..] if the browser is in normal browsing mode when the Flash Player instance is created, then that particular instance will forever be in normal browsing mode (private browsing is turned off). Accordingly, toggling private browsing on or off without refreshing the page or closing the private browsing window will not impact Flash Player. Local Shared Objects are not limited to the site you visit, and third-party storage is enabled by default. At the Global Storage Settings panel one can deselect the default Allow third-party Flash content to store data on your computer. Because of the cross-browser and expiration-less nature (and the fact that few people know about it), I feel that the cross-browser third-party Flash Cookies are more dangerous for visitor tracking than third-party normal HTTP cookies. They are even used to restore plain HTTP cookies that the user tried to delete: "All advertisers, websites and networks use cookies for targeted advertising, but cookies are under attack. According to current research they are being erased by 40% of users creating serious problems," says Mookie Tenembaum, founder of United Virtualities. "From simple frequency capping to the more sophisticated behavioral targeting, cookies are an essential part of any online ad campaign. PIE ["Persistent Identification Element"] will give publishers and third-party providers a persistent backup to cookies effectively rendering them unassailable", adds Tenembaum. [..] To justify this tracking mechanism, UV's Tenembaum said, "The user is not proficient enough in technology to know if the cookie is good or bad, or how it works." When selecting None (zero KB) for Specify the amount of disk space that website websites that you haven't yet visited can use to store information on your computer, and checking Never ask again then some sites do not work. However, the same site might work when setting it to None but without selecting Never ask again, and then choose Deny whenever prompted. Both options would result in zero KB of data being allowed, but the behaviour differs. The plugin also provides a Flash Player cache for Adobe-signed files. I guess these files are not an issue. So: how to automatically delete that information? On a Mac, one can find a settings.sol file and a folder for each visited Flash-website in: $HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer/sys/ Deleting the settings.sol file and all the folders in sys, removes the trail from the settings panels. However, the actual Local Shared Ojects are elsewhere (see Wikipedia for locations on other operating systems), in a randomly named subfolder of: $HOME/Library/Preferences/Macromedia/Flash Player/#SharedObjects But then: how to remove this automatically? Simply removing the folders and the settings.sol file every now and then (like by using launchd or Windows' Task Scheduler) may interfere with active browsers. Or is it safe to assume that, given the cross-browser nature, the plugin would not care if things are removed while it is active? Only clearing during log-off may not work for those who hibernate all the time. Firefox users can install BetterPrivacy or Objection to delete the Local Shared Objects (for all others browsers as well). I don't know if that also deletes the trail of website domain names. Or: how to stop Flash from storing a history trail? Change of plans: I'm currently testing prohibiting Flash to write to its own sys and #SharedObjects folders. So far, Flash has not tried to restore permissions (though, when deleting the folders, Flash will of course recreate them). I've not encountered any problems but this may take some while to validate, using multiple browsers and sites. I've not yet found a log that reports errors. On a Mac: cd "$HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer" rm -r sys/* chmod u-w sys cd "$HOME/Library/Preferences/Macromedia/Flash Player" # preserve the randomly named subfolders (only preserving the latest would suffice; see below) rm -r \#SharedObjects/*/* chmod -R u-w \#SharedObjects I guess the above chmods cannot be achieved on an old Windows system (I'm not sure about XP and Vista?). Though maybe on Windows one could replace the folders sys and #SharedObjects with dummy files with the same names? Anyone? Obviously, keeping Flash from storing those Local Shared Objects for all sites may cause problems. Some test results (Flash 10 on Mac OS X): When blocking the sys folder (even when leaving the #SharedObjects folder writable) then YouTube won't remember your volume settings while viewing multiple videos. Temporarily allowing write access to the blocked folders while visiting trusted sites (to only create folders for domains you like, maybe including references in settings.sol) solves that. This way, for YouTube, Flash could be allowed to write to sys/#s.ytimg.com and #SharedObjects/s.ytimg.com, while Flash could not create new folders for other domains. One may also need to make settings.sol read-only afterwards, or delete it again. When blocking both the sys and #SharedObjects folders, YouTube and Vimeo work fine (though they might not remember any settings). However, Bits on the Run refuses to even show the video player. This is solved by temporarily unblocking the #SharedObjects folder, to allow Flash to create a subfolder with some random name. Within this folder, it would create yet another folder for the current Flash website (content.bitsontherun.com). Removing that website-specific folder, and blocking both #SharedObjects and the randomly named subfolder, still seems to allow Bits on the Run to operate, even though it still cannot write anything to disk. So: the existence of the randomly named subfolder (even when write protected) is important for some sites. When I first found the #SharedObjects folder, it held many subfolders with random names, some created on the very same day. I wonder when Flash decides it wants a new folder, and how it determines (and remembers) that random name. For a moment I considered not blocking write access for sys and #SharedObjects, but explicitly creating read-only folders for well-known third-party tracking domains (like based on a list from, for example, AdBlock Plus). That way, any other domain could still create Local Shared Objects. But the list would be long, and the domains from AdBlock Plus are probably all third-party domains anyway, so disabling Allow third-party Flash content to store data on your computer might have the very same result. Any experience anyone? (Final notes: if the above links to the settings panels do not work in the future, then use the URL that is known to Flash player as a starting point: www.adobe.com/go/settingsmanager. See also "You Deleted Your Cookies? Think Again" at Wired.com -- which uses Flash cookies itself as well... For the very suspicious using Time Machine: you may want to exclude both folders, for each user, and remove the trace that is already on your backup.)

    Read the article

  • Dreamweaver not loading due to workspace file problem

    - by Lynda
    I went to launch Dreamweaver CS 5.5 and this message popped up: XML parsing fatal error: Invalid document structure, line 1, file C:\Documents...(file path)...Workspace\My Workspace.xml It was followed by The following panel layout is missing or could not be read: C:...My Workspace.xml The application will not have a correct layout. Please load one from WindowsWorkspace After that, Dreamweaver acted as if it was going to load, but never did. When I tried to close the program, it crashed. I followed the file path and I saw two files: My Workspace.xml 0kb and My Workspace 5kb. The second one has an unknown file type. I deleted the first file and renamed the unknown file type to My Workspace.xml; everything worked fine after that point. Why did Dreamweaver do this? This has happened several times, but I have not changed anything that should affect that file type.

    Read the article

  • Windows does not recognize DVDs inserted into Blu-ray drive

    - by icemanind
    I am having a problem with a Blu-ray drive I have in my PC. Its a Blu-ray reader drive and it reads and writes CDs and DVDs. My drive has been working great for about a year now, but for some reason now, when I insert a DVD, Windows 7 doesn't recognize that there is a disc in the drive. I have to eject the disc and insert it again. I sometimes have to do this like 30 times before it "catches" and Windows 7 recognizes the disc. My discs are not scratched up. It does it even with brand new discs. I've tried about 10 different DVDs and the same problem happens. One thing that is weird though is that the problem does not seem to happen when I insert Blu-ray discs. The problem only happens with DVD discs. I tried running a drive lens cleaner. Same issue. Any suggestions?

    Read the article

  • Sound quality in bluetooth headphones doesn't change to high

    - by Sergiy Byelozyorov
    My Bluetooth headset Philips SHB6610 has several profiles. It can work as low-quality headset (HFP) and high-quality headphones (A2DP). I mean sound quality. Typically whenever I start to play the music in my media player it works in high quality, while if I receive a call on Skype it switches to low-quality. Once call is finished it falls back on high quality again. However, from time to time, it happens that I connect headphones to the computer and they just stay in low-quality mode. I don't know how can I change the profile manually, since it was always done automatically so far. The only thing that helps (but not always) is re-pairing of headphones with PC. I am using Windows 7 on Toshiba Satellite Pro P300-1CG laptop, with Belkin Mini Bluetooth Adapter.

    Read the article

  • Tools to (privately) annotate/markup a website for maintenance

    - by rob
    I've been tasked with updating a website. Rather than proofreading and updating each page (one at a time), I want to make a single pass over the entire website, marking graphics/images/videos that need to be rewritten, removed, or updated. I thought about taking screenshots, marking those up, and putting them in our bug-tracking database, but that seems like an extremely tedious solution. Some of the content is similar on various pages across the website, and the entire site itself is localized into several languages (so any changes made to the English version will have corresponding changes for other languages). I also want all of my markup to remain private (that is, if it's stored online somewhere, I should be the only person who can see my comments). I found an article that lists several website annotation services, but it's not clear whether they allow private annotations, or whether these tools are even appropriate for website maintenance (many of them look more geared toward social networking). I've started making a list of some necessary and desired features below, and may add more as necessary. Annotations/markup/comments remain private (only visible to me) Comment history/tagging (so I can reuse the same comment for shared footers, items requiring similar updates, etc.) Ability to print/export a list or report of all comments for the entire website Ability to produce a categorized list of changes (e.g., to produce a list of images that need updating, which I can send to the graphic designer) What processes and tools do you use to keep track of all the changes that need to be made to a website? What features are painfully absent from the tools you use?

    Read the article

  • How to switch between the upper and lower pane in emacs?

    - by Anthony Kong
    I am using the erlang mode in Aquamacs. The mode, by default, creates a new pane and buffer "*erlang*" when I hit C-C C-K to compile an erlang file. (as seen in the attached screen shot) What is the easiest way to switch between these two panes? I do not think "C-x b" is applicable in this case because 'C-X b' then "*erlang" is slow considering I have to switch between my files and the erlang shell rather frequently.

    Read the article

  • Windows 7 install detects SSD but doesn't list it to install to

    - by Mohamed Meligy
    I'm having quite a weird problem when trying to install Windows 7 SP1 on a new Corsair Force Series 3 SSD to replace a failing HDD in my wife's laptop. When I boot to Windows install, it shows that I have no disks to install to, and tells me to find it a driver to any custom disks I may have. When I go to repair option on the first install window, and then open command prompt Window, I can see the disk using diskpart, and can partition it and format partitions, and then later access them from command prompt and copy files to them. After creating partitions, clicking the "browse" button in Windows install screen that shows no disks available to install Windows to, does show the partitions created by diskpart! So, it does detect the disk and partitions, but refuses to list them as options to install to. People on the Interwebs seem to suggest that just running diskpart "clean" solved the issue for most people, just creating an "active" "primary" partition is al most tutorials suggest. Both got me only as far as described above. The BIOS doesn't have RAID option, changing between "ATA" and "AHCI" (the only available options) didn't make any difference. Might be worth mentioning that this is on a laptop that has Sata III controller for main drive (which I connected the Sata3 SSD to), and Sata II for DVD (which I used for Windows install media). That's what googling brings at least (DELL XPS 15 L502). Any ideas? . Update: The SSD is 460 GB. I tried setting it all as one partition and creating 70-90 GB partition as well (NTFS). More importantly, Windows doesn't list the partition as one it cannot install to (which it does with disks in general when they are small for example). What happens here is different. It doesn't list anything at all. It shows empty list of drives.

    Read the article

  • How to fix C:\Windows\System32\StikyNot.exe

    - by Sara Kamil
    I have tried all the trouble shooting options that i have found on the net. But i still get the same error message C:\Windows\System32\StikyNot.exe . I really like this application and none of the other sticky note applications compare to it. I really hope someone can hemp me with this. Thank you.

    Read the article

  • How do I determine if my controller is in IDE or AHCI mode in Linux?

    - by philcolbourn
    I have an old MacBook Pro 4,1 (early 2008) - but I suspect an answer would apply to many MacBook Pros. It has an Intel IDE/SATA controller (ICH8M/ICH8M-E). I have installed a patched MBR that is supposed to put my controller into AHCI mode. It does this by setting some controller port value that I don't understand. This seems to work as I get this from lspci: 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) Now most, perhaps all, sites that provide a solution (enabling AHCI) suggest that after a sleep/wake cycle that a controller will revert to IDE mode due to how Apple support Windows. They recommend disabling sleep. From author of patchedcode.bin I think Enabling AHCI for Windows on MacBooks NB: I do not have bootcamp installed and I do not have Windows installed. Is there a way to prove that my controller is in IDE or AHCI mode? Background Data Using patchedcode.bin MBR I get this in syslog: Jun 12 22:33:22 max kernel: [ 1.860955] ahci 0000:00:1f.2: version 3.0 Jun 12 22:33:22 max kernel: [ 1.861052] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X Jun 12 22:33:22 max kernel: [ 1.861117] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode Jun 12 22:33:22 max kernel: [ 1.861120] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Jun 12 22:33:22 max kernel: [ 1.861130] ahci 0000:00:1f.2: setting latency timer to 64 Jun 12 22:33:22 max kernel: [ 1.880880] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jun 12 22:33:22 max kernel: [ 1.880983] scsi2 : ahci Jun 12 22:33:22 max kernel: [ 1.884552] scsi3 : ahci Jun 12 22:33:22 max kernel: [ 1.886932] scsi4 : ahci Jun 12 22:33:22 max kernel: [ 1.886998] ata3: SATA max UDMA/133 abar m2048@0xdb504000 port 0xdb504100 irq 45 Jun 12 22:33:22 max kernel: [ 1.887000] ata4: DUMMY Jun 12 22:33:22 max kernel: [ 1.887002] ata5: DUMMY Jun 12 22:33:22 max kernel: [ 2.204103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 12 22:33:22 max kernel: [ 2.204656] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 12 22:33:22 max kernel: [ 2.204662] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Jun 12 22:33:22 max kernel: [ 2.205324] ata3.00: configured for UDMA/100 Jun 12 22:33:22 max kernel: [ 2.205554] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0081 PQ: 0 ANSI: 5 Using my original MBR I get this from syslog: Jun 13 18:07:13 max kernel: [ 0.622861] ata_piix 0000:00:1f.1: version 2.13 Jun 13 18:07:13 max kernel: [ 0.622869] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 Jun 13 18:07:13 max kernel: [ 0.622924] ata_piix 0000:00:1f.1: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.623339] scsi0 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623730] scsi1 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623765] ata1: PATA max UDMA/100 cmd 0x8108 ctl 0x811c bmdma 0x80e0 irq 21 Jun 13 18:07:13 max kernel: [ 0.623767] ata2: PATA max UDMA/100 cmd 0x8100 ctl 0x8118 bmdma 0x80e8 irq 21 Jun 13 18:07:13 max kernel: [ 0.623810] ata_piix 0000:00:1f.2: MAP [ Jun 13 18:07:13 max kernel: [ 0.623811] P0 -- -- -- ] Jun 13 18:07:13 max kernel: [ 0.623866] ata_piix 0000:00:1f.2: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.624241] scsi2 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624558] scsi3 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624862] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18 Jun 13 18:07:13 max kernel: [ 0.624865] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18 Jun 13 18:07:13 max kernel: [ 1.208879] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 13 18:07:13 max kernel: [ 1.208882] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) Jun 13 18:07:13 max kernel: [ 1.208961] ata1.01: ATAPI: MATSHITA DVD+/-RW UJ-867S, 1.00, max UDMA/33 Jun 13 18:07:13 max kernel: [ 1.216186] ata3.00: configured for UDMA/100 Jun 13 18:07:13 max kernel: [ 1.224396] ata1.01: configured for UDMA/33

    Read the article

  • Using VNC as a virtual KVM switch

    - by aurinko
    I'm wanting to control my laptop from my desktop. I've been doing this with VNC (PC desktop to Macbook pro) - but I want to remove the 'viewing' aspect of it on my desktop. I.e. I don't want to have the viewing screen on the desktop.. but be able to control the mouse/keyboard via VNC. Is this possible? I'm using realVNC viewer and connecting to the default in-built VNC server on Mac OS X Lion. Cheers for any help.

    Read the article

  • Virtual Machines Renaming/Backing up/Sharing

    - by evan
    I've started using VMware virtual machines for all of my software development projects and have a few questions for others doing the same thing. First, how can you rename the virtual machine and the name of the virtual hard drive? I have a base development machine that I clone for different projects. I'd like to name the machine and it's hard drive according the the project (right now when I copy them via cut and paste, the file names remain the same and I can only organize them by putting them in a specific directory). Second, what is the best way to back up a virtual machine? Is it possible (by breaking the virtual hard drive up into chunks instead of one big file) to get incremental backups working? It seems time machine always tries to make a copy of the whole thing which is time consuming because each virtual machine is around 30GB. Finally, how slow would it be to have a virtual machine shared on an NFS mount on a wireless N network and used from multiple computers (but with only one person using it at a time.) Would it be more reasonable on a gigabit lan connection? Thanks for your input! And please feel free to share any advice or wisdom about using virtual machines for software development and the best ways to speed them up!

    Read the article

  • impossible to defragment and resize a partition

    - by chino99
    I'm trying to shrink the main partition on my new pc with Windows Seven 64 bits preloaded from 500Gb to 100Gb. Unfortunately, some files prevent any attempt to go below 290Gb. See screnshot: http://i40.tinypic.com/14eccp3.jpg I have already disabled restore points, as somebody had suggested, but nothing changes. What have I to do to further shrink this partition?

    Read the article

  • Internal disk not correctly recognised by Windows 7

    - by david
    i'm having problems configuring a disk in a brand new, clean windows-7 install. here are some system specifics- . disk- western digital velociraptor wd6000hlhx . mobo- gigabyte z77x-ud3h . bios sata-mode set to ahci [not raid], w/disk connected to sata0 [6gb/s hi-speed sata]. . windows 7 enterprise sp1 x64 the disk is recognized by bios and correctly identified [name & size ok]. the disk is also recognized by windows on a h/w level, but it won't show up in the explorer. windows reports the device is working correctly. windows disk manager shows the drive, but says it's uninitialized and has no partitions [which is incorrect]. if i try to initialize the drive, windows throws an error saying that it "cannot find the file specified". [which file???] before connecting the drive to the new machine, i partitioned and formatted the disk under windows xp sp2, giving it 2 partitions [mbr, not gpt] and copying over a boatload of data. obviously none of this appears under windows 7. removing the disk from the new machine and replacing it back in the windows xp machine shows the disk and all data are intact and functional. i'd like to have windows 7 recognize the disk w/o having to lose the data and start over. is this possible? if so, how would i do that? I checked this post, but even though the problem seems identical, the information didn't help. any help appreciated. thanks!

    Read the article

  • Searching for a specific option in a man page

    - by mitch_feaster
    I often find myself man'ing a command just to learn about one specific option. Most of the time I can search to the option just fine, unless it's something like ffmpeg or gcc where I have to step through about 40 matches until I get to the actual description of the option... Sometimes I can get lucky and search for the word "options" to get close and then refine it from there, but it would be nice if I could reliably jump straight to the option in question. It would be cool if there was a tool that could parse out the options and build a database on which you could do searches, but after looking at the groff markup for a few pages I've determined it would only be a best-guess effort due to the lack of meta-information in groff markup... In my ideal world woman mode in emacs would support searching for specific options... :) Any tips for jumping straight to a specific option in a man page?

    Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >