Search Results

Search found 45894 results on 1836 pages for 'super'.

Page 126/1836 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

  • bradford persistent agent login not coming up.

    - by alex
    Wired connection. Desktop. It downloads and installs fine but at the point where the login is supposed to pop up. Nothing happens. Bradford says I have normal network access and it never shows it scanning. It just installs and does nothing. I have all of the updates and everything Bradford needs. And I've used the internet at this dorm before witb this computer. Tried reinstalling.disabling my firewall. Any advice would be appreciated

    Read the article

  • Can I use this power supply + case combination without causing problems?

    - by evan
    I am putting together a computer with a Antec P180 case and a Thermaltake TR2 RX 650 W power supply. The problem is that the Antec P180 case has a separate compartment for the power supply. With an opening for the on/off switch + ac connector to one side, a wall with a small hole for cables to route through on top, a wall on the bottom, and on the other side a fan which pushes air from the hard drive compartment to the power supply compartment. I think the design of the case assumes the power supplies fan is on the side next to the on/off switch, but the fan on the power supply I have is on top, which makes me worry about overheating the power supply. There is about half an inch between the top of the power supply and the wall and the other fan should keep air flowing to push out the air that the power supply pushes upwards. Do you think this setup should work, or should I go get another power supply? Thanks!! PS: This computer will be running an Ubuntu server, so it will always be on, but the rest of the components shouldn't be generating as much heat as they would on say a gaming machine.

    Read the article

  • How do I use the iPhone Calculator's modulus function?

    - by Josh Brown
    I've tried several ways and can't get the iPhone Calculator's modulus function. If I want to compute, say, 5 % 3, what buttons do I press to get it to work? When I try pressing 5, then %, Calculator immediately displays 0.05. Is the mod function broken or am I pressing the buttons in the wrong order? I'm running iPhone OS 3.1.3.

    Read the article

  • Virtual Machines Renaming/Backing up/Sharing

    - by evan
    I've started using VMware virtual machines for all of my software development projects and have a few questions for others doing the same thing. First, how can you rename the virtual machine and the name of the virtual hard drive? I have a base development machine that I clone for different projects. I'd like to name the machine and it's hard drive according the the project (right now when I copy them via cut and paste, the file names remain the same and I can only organize them by putting them in a specific directory). Second, what is the best way to back up a virtual machine? Is it possible (by breaking the virtual hard drive up into chunks instead of one big file) to get incremental backups working? It seems time machine always tries to make a copy of the whole thing which is time consuming because each virtual machine is around 30GB. Finally, how slow would it be to have a virtual machine shared on an NFS mount on a wireless N network and used from multiple computers (but with only one person using it at a time.) Would it be more reasonable on a gigabit lan connection? Thanks for your input! And please feel free to share any advice or wisdom about using virtual machines for software development and the best ways to speed them up!

    Read the article

  • Execute Backup-SqlDatabase cmdlet remotely

    - by Maxim V. Pavlov
    When I run the following script line locally on an SQL Server machine, it executes perfectly: Backup-SqlDatabase -ServerInstance $serverName -Database $sqldbname -BackupFile "$($backupFolder)$($dbname)_db_$($addinionToName).bak" $serverName contains a short name of the SQL Server instance. SQL Server is 2012, so these new cmdlets work like a charm. On the other hand, when I am trying to perform a DB backup from a TeamCity agent machine like this (Through Invoke-Command cmdlet): function BackupDB([String] $serverName, [String] $sqldbname, [String] $backupFolder, [String] $addinionToName) { Import-Module SQLPS -DisableNameChecking Backup-SqlDatabase -ServerInstance $serverName -Database $sqldbname -BackupFile "$($backupFolder)$($dbname)_db_$($addinionToName).bak" } Invoke-Command -computername $SQLComputerName -Credential $credentials -ScriptBlock ${function:BackupDB} -ArgumentList $SQLInstanceName, $DatabaseName, $BackupDirectory, $BakId results in an error: Failed to connect to server $serverName. + CategoryInfo : NotSpecified: (:) [Backup-SqlDatabase], ConnectionFailureException + FullyQualifiedErrorId : Microsoft.SqlServer.Management.Common.ConnectionFailureException,Microsoft.SqlServer.M anagement.PowerShell.BackupSqlDatabaseCommand What is the correct way to execute Backup-SqlDatabase cmdlet remotely?

    Read the article

  • change default username when ssh to another pc

    - by Tom
    When I ssh between different pcs I can omit my username (tom) and just type ssh pc_name instead of ssh tom@pc_name I like this feature, and have got into the habit of using it. Unfortunately, on one of my computers I went for the user name tommy. Everytime I connect to this computer I forget to write tommy@creative_pc and wonder why my password doesn't work. Is there a way to tell ssh what user name to use when the username is omitted? Edit: Just found the following question that is similar: How to make ssh log in as the right user? It didn't come up on my initial search.

    Read the article

  • TrueCrypt drive letter not available

    - by Tono Nam
    With c# or a batch file I mount a trueCrypt volume located at A:\volumeTrueCrypt.tc With c# I do: static void Main(string[] args) { var p = Process.Start( fileName:@"C:\Program Files\TrueCrypt\TrueCrypt.exe", arguments:@"/v a:\volumetruecrypt.tc /lw /a /p truecrypt" ); p.WaitForExit(); } the alternative is to run the command on the command line as: C:\Windows\system32>"C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /lw /a /p truecrypt Either way I get the error: Why do I get that error? I was able to run that command the first time. The moment I dismounted the volume and tryied to mount it again I got that error. I know that drive letter W is available because it shows as an available letter on true crypt if I where to open it manually: If I where then click on the button mount and then type the password truecrypt (truecrypt is the password) then it will successfully mount on drive w. Why I am not able to mount it from the command line!? If I change the drive letter on the command line it works. I want to use the drive W though. In other words executing "C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /lz /a /p truecrypt will successfully mount that volume on drive z but I do not want to mount it on drive z I want to mount it on drive w. The first time I ran the batch it ran fine. Also if I restart my computer I believe it should work. More info on how to use trueCrypt through the command line can be found at: http://www.truecrypt.org/docs/?s=command-line-usage Edit I was also investivating when does this error occures. In order to generate this error you need to follow this steps. 1) execute the command: (note the /q argument at the end for quiet) "C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /ln /a /p truecrypt /q "C...TrueCrypt.exe" = location where trueCrypt is located /v "path" = location where volume is located /n = drive letter n /p truecrypt = password is "trueCrypt" /q = execute in quiet mode. do not show window note I am mounting to drive letter n 2) now volume should be mounted. 3) Open trueCrypt and manually dismount that volume (without using command line) 4) Attempt to run the same command line (without the /q so you see the error) "C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /ln /a /p truecrypt 5) an error should show up So the problem ocures when I manually dismount the volume. If I dismount it from the command line I get no errors. But I think this is a bug from trueCrypt

    Read the article

  • Windows Vista and 7 crossrealm authentication MIT Kerberos

    - by fox8
    I'm using Windows Server 2008 and Windows Vista and 7 for cross realm authentication using MIT Kerberos 1.6 but when i try to login with a user the KDC answers: (wireshark output) error_code: KRB5KDC_ERR_ETYPE_NOSUPP (14) ... e-text: BAD_ENCRYPTION_TYPE I want to know how can I change the encryption type method to be compatible with the KDC (i tried a XP client and it worked fine). Many thanks!

    Read the article

  • Advantages of Ubuntu LTS versions over regular Ubuntu?

    - by Adam Matan
    Do the LTS versions of Ubuntu have any advantages for the non-paying customers (who don't get any support?) From the tech spec only, these versions seem outdated in many aspects - mainly drivers and installed software versions. For instance, My previous (bounty!) problem regarding the AGN 5100 drivers would have been solved under Ubuntu 9.04.

    Read the article

  • Windows 7 install detects SSD but doesn't list it to install to

    - by Mohamed Meligy
    I'm having quite a weird problem when trying to install Windows 7 SP1 on a new Corsair Force Series 3 SSD to replace a failing HDD in my wife's laptop. When I boot to Windows install, it shows that I have no disks to install to, and tells me to find it a driver to any custom disks I may have. When I go to repair option on the first install window, and then open command prompt Window, I can see the disk using diskpart, and can partition it and format partitions, and then later access them from command prompt and copy files to them. After creating partitions, clicking the "browse" button in Windows install screen that shows no disks available to install Windows to, does show the partitions created by diskpart! So, it does detect the disk and partitions, but refuses to list them as options to install to. People on the Interwebs seem to suggest that just running diskpart "clean" solved the issue for most people, just creating an "active" "primary" partition is al most tutorials suggest. Both got me only as far as described above. The BIOS doesn't have RAID option, changing between "ATA" and "AHCI" (the only available options) didn't make any difference. Might be worth mentioning that this is on a laptop that has Sata III controller for main drive (which I connected the Sata3 SSD to), and Sata II for DVD (which I used for Windows install media). That's what googling brings at least (DELL XPS 15 L502). Any ideas? . Update: The SSD is 460 GB. I tried setting it all as one partition and creating 70-90 GB partition as well (NTFS). More importantly, Windows doesn't list the partition as one it cannot install to (which it does with disks in general when they are small for example). What happens here is different. It doesn't list anything at all. It shows empty list of drives.

    Read the article

  • What are the pitfalls of hardlinked files on my desktop PC?

    - by MountainX
    All the identical-content files on my PC are now hardlinked. (My data is completely de-duplicated. It is a consequence of the way I copied my data from my old computer.) What pitfalls do I need to be aware of now that certain actions on one file could silently affect a number of other files? I know that deleting the file I'm working on is not a problem (assuming I deleted it on purpose). It doesn't affect any of the other hardlinked files and I don't see that the delete action would lead to unexpected side effects. Moving or renaming the file is not a problem. I don't see any unexpected consequences. I don't think copying hardlinked files is a problem, but I'm not as confident about any unexpected consequences in this regard. What I have seen is that making a copy (to the same disk) of a hardlinked file with cp keeps the copy hardlinked (i.e., inode number doesn't change in the copy). Copying to another filesystem obviously breaks the hardlink. (I guess one pitfall is forgetting this fact, given that my PC has 3 hard disks.) Changing permissions does affect all linked files. So far this has proven handy. (I made a large number of the hardlinked files read-only.) None of the operations above seem to produce any major unexpected consequences. However, as was pointed out to me by Daniel Beck in a comment, editing or modifying a file can sometimes be a problem. It depends on the tool and maybe the type of edit. (For example, editing small text files using sed seems to always break the link while using nano doesn't.) This introduces the chance that editing one file could affect all the hardlinked files (i.e., alter the original inode). My proposed solution to this is to make all hardlinked files read-only (and that is already mostly the case). If I can't do that for some files, I will unlink those particular files. Is there any problem with this read-only approach? I'm assuming that if I go to edit a file and find it to be read-only, I'll remember to unlink that filename while making it writable. So one pitfall might be forgetting this rule. In that case, I'll have to rely on my backups. Am I correct in the above statements? And what else do I need to know? BTW, I'm running Kubuntu 12.04. I'm also using btrfs. (I have 2 SSD's and 1 HDD in the PC. I will also be adding an external USB HDD. I'm also connected to a network and I mount some NFS shares. I don't assume any of these last bits are relevant to the question, but I'm adding them just in case.) BTW, since I have more than one drive (with separate file systems), to unlink any file all I have to do is copy it to another drive, then move it back. However, using sed also works (in my testing). Here's my script: sed -i 's/\(.\)/\1/' file1 Surprisingly, this even unlinks zero byte files. In my testing it also appears to work on non-text files without any special options. (But I understand that the --binary option might be needed on Windows, MS-DOS and Cygwin.) However, copying to another disk and moving back may be the best way to unlink. For my use-case, unlink command doesn't really "unlink", rather it "removes".

    Read the article

  • IRC newbie needs detailed "How To" directions for freenode.net connection with OS X IRC app

    - by Johnny Utahh
    Newbie IRC user here. Trying to get connected on freenode.net, preferably with a native Mac OS X client (I'm running 10.6.8), or at least something with a good "OS X feel." Also seeking a client that comes "well regarded" in Mac community (eg, Linkinus reflects outstanding Apple App Store user ratings). Thus far have found it remarkably difficult to "get started from scratch" with ANY client. All attempted clients (Colloquy, Textual, Linkinus) experience some sort of "* Notice -- You need to identify via SASL to use this server" error. I see this freenode SASL-friendly client list; am I really limited to only these clients? This "IRC-freenode startup" procedure has been far more difficult than I had originally anticipated. Why can't I just do this and have it "just work"? Bottom line: looking for a "chapter and verse"/cookbook description of how to get started with freenode.net IRC chat rooms on Mac OS. Need reference to known-working client, and then exact directions on how to get connected to a chat room with a nickname.

    Read the article

  • How to register an agent with launchd

    - by Konrad Rudolph
    I’m unable to schedule a periodic launch with launchctl/launchd on OS X (Leopard). Basically, I’m unable to find a step-by-step list of instructions on the web and the intuitive approach doesn’t work. The sync.plist file: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>net.madrat.utils.sync</string> <key>Program</key> <string>rsync</string> <key>ProgramArguments</key> <array> <string>-ar</string> <string>/path/to/folder/</string> <string>/path/to/backup/</string> </array> <key>StartInterval</key> <integer>7200</integer> </dict> </plist> I’ve put this script inside the path ~/Library/LaunchAgents. Next, I’ve registered the script using launchctl load ~/Library/LaunchAgents/sync.plist Finally, to test that it works, I started the job: launchctl start net.madrat.utils.sync – Nothing happened. Manually executing the rsync command in the terminal yields the expected result. I’m fairly sure that the job was registered correctly because if I try to start a non-existing job, I get an error message (which I didn’t get in the above command). What did I do wrong?

    Read the article

  • Videoediting slow on windows with HD footage in fileformat .MOV

    - by Joakim
    Hi, My camera a Canon 5D mark II serves me .mov files in HD - but these are a pain in the neck to edit on my pc. I have tried Premier, Vegas, Pinnacle etc - but it is almost impossible to edit and do a movie. I do have a good computer with windows7 but that doesnt help me, and I dont want to buy a new monster pc just for that task. Question: I could manage to convert the files, but what would be the best format? I dont want to loose to much quality. Anyone have any ideas? Best regards, Joakim

    Read the article

  • Can I set up a separate RAID 5 devices?

    - by GregH
    I have a GIGABYTE GA-P55M-UD2 motherboard in my system (Windows 7 64 bit) and currently have a Western Digital SATA 10k RPM drive in it. Is it possible to add three more SATA drives to make a single RAID 5 device that is separate from the current 10k rpm drive that I have in it? Once I enable RAID for the SATA drives, I am not required to make all of the drives part of the RAID volume am I? I can have separate RAID'ed and non-RAID'ed volumes can't I?

    Read the article

  • All downloads being interrupted

    - by Jake
    System: Windows 7 Professional 64bit. 8GB RAM, Intel i5-2400 CPU, +300GB free on the hard drive. AVG Internet Security 2012 (enabled & disabled, with firewall enabled and disabled - no effect for either). This computer is less than a year old. Network: This problem is occurring on a single computer on a network with multiple computers. The router is a Motorola Netopia 3347-02 (DSL Modem/Wireless Router combined). The computer is plugged in directly to the modem, other computers are using the wireless successfully. The router has been reset. The only thing odd about the connection between the router and computer is that it is configured to allow RDP through, so it is assigned a static IP by the router and port forwarding is enabled for port 3389. Also, though I doubt it matters, a second wireless router is active behind this router providing a second network that some computers in the area use without issues. Details: All downloads initiated on this specific computer eventually fail, this includes streaming from youtube, specialized downloads (itunes), downloads from websites, FTP downloads, etc. Failure occurs with all browsers, but in chrome this is the process it takes: 1) Download begins normally, 2) At some point between (observed) 7MBs and 229MBs the download stops progressing (at this point, if watching chrome's task manager, you can see the network activity for the downloading tab drop to 0kps), 3) for some time the download sits there still attempting to complete, but will eventually display "123,049,871/0 B, Interrupted" (where the number is whatever it actually got to). The file I am using to test this is a very large .zip file located on a server I control, but the problem seems to occur on any site. The amount downloaded is completely random, and seems to be more time-based than anything (if I start a download immediately after the last one fails, it tends to get further than the last one). Small files can get through for this reason, though they can fail as well. In a test where I simultaneously downloaded the same file via HTTP (chrome) and FTP (windows explorer), both downloads failed at the same instant, though explorer displayed "Connection timed out" several minutes before chrome finally showed the download as interrupted. Other things I have tried based on advice given to people with similar/identical problems: Setting my MTU to 1492 (as described here: http://blog.thecompwiz.com/2011/08/networking-issues.html) Disabling write caching to the hard drive storing the download on an external device successfully transmitted +1GB file from one computer on the same network to this computer disabling indexing in the folder the download was being stored in disabling all security software checked to make sure all drivers were up to date read about 50 accounts with nearly exact descriptions of what I'm experiencing, none of which had a solution given Running Processes: Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 104,836 K smss.exe 332 Services 0 1,276 K csrss.exe 764 Services 0 5,060 K wininit.exe 820 Services 0 4,748 K csrss.exe 844 Console 1 23,764 K services.exe 876 Services 0 11,856 K lsass.exe 892 Services 0 14,420 K lsm.exe 900 Services 0 7,820 K winlogon.exe 944 Console 1 7,716 K svchost.exe 428 Services 0 12,744 K svchost.exe 796 Services 0 12,240 K svchost.exe 1036 Services 0 22,372 K svchost.exe 1084 Services 0 174,132 K svchost.exe 1112 Services 0 56,144 K svchost.exe 1288 Services 0 18,640 K svchost.exe 1404 Services 0 29,616 K spoolsv.exe 1576 Services 0 25,924 K svchost.exe 1616 Services 0 12,788 K AppleMobileDeviceService. 1728 Services 0 9,796 K avgwdsvc.exe 1820 Services 0 8,268 K mDNSResponder.exe 1844 Services 0 5,832 K w3dbsmgr.exe 1108 Services 0 43,760 K QBCFMonitorService.exe 1336 Services 0 16,408 K svchost.exe 2404 Services 0 28,240 K taskhost.exe 3020 Console 1 12,372 K dwm.exe 2280 Console 1 5,968 K explorer.exe 2964 Console 1 152,476 K WUDFHost.exe 3316 Services 0 6,740 K svchost.exe 3408 Services 0 5,556 K RAVCpl64.exe 3684 Console 1 13,864 K igfxtray.exe 3700 Console 1 7,804 K hkcmd.exe 3772 Console 1 7,868 K igfxpers.exe 3788 Console 1 10,940 K sidebar.exe 3836 Console 1 84,400 K chrome.exe 3964 Console 1 19,640 K pptd40nt.exe 4068 Console 1 5,156 K acrotray.exe 3908 Console 1 14,676 K avgtray.exe 3872 Console 1 9,508 K jusched.exe 4076 Console 1 4,412 K iTunesHelper.exe 1532 Console 1 87,308 K SearchIndexer.exe 3492 Services 0 36,948 K iPodService.exe 4136 Services 0 7,944 K BrccMCtl.exe 4276 Console 1 18,132 K splwow64.exe 4380 Console 1 32,600 K qbupdate.exe 4836 Console 1 24,236 K svchost.exe 4288 Services 0 20,700 K wmpnetwk.exe 3112 Services 0 9,516 K FNPLicensingService.exe 5248 Services 0 5,852 K QBW32.EXE 5508 Console 1 127,068 K QBDBMgrN.exe 5600 Services 0 42,252 K EXCEL.EXE 2512 Console 1 99,100 K LMS.exe 3188 Services 0 5,616 K UNS.exe 1600 Services 0 7,308 K axlbridge.exe 5260 Console 1 5,132 K chrome.exe 5888 Console 1 200,336 K chrome.exe 3536 Console 1 26,076 K chrome.exe 1952 Console 1 20,168 K chrome.exe 4596 Console 1 24,696 K chrome.exe 4292 Console 1 48,096 K chrome.exe 2796 Console 1 23,520 K Acrobat.exe 1240 Console 1 87,252 K 123w.exe 4892 Console 1 22,728 K calc.exe 1700 Console 1 12,636 K chrome.exe 1328 Console 1 28,888 K chrome.exe 3696 Console 1 47,012 K rundll32.exe 6320 Console 1 7,104 K chrome.exe 4928 Console 1 44,248 K AVGIDSAgent.exe 260 Services 0 12,940 K avgfws.exe 6052 Services 0 26,912 K avgnsa.exe 5064 Services 0 2,496 K avgrsa.exe 3088 Services 0 2,200 K avgcsrva.exe 2596 Services 0 380 K avgcsrva.exe 6948 Services 0 408 K StikyNot.exe 452 Console 1 14,772 K chrome.exe 4580 Console 1 28,200 K chrome.exe 4016 Console 1 57,756 K svchost.exe 7140 Services 0 4,500 K chrome.exe 6264 Console 1 56,824 K chrome.exe 7008 Console 1 56,896 K chrome.exe 2224 Console 1 38,032 K taskhost.exe 612 Console 1 7,228 K chrome.exe 6000 Console 1 10,928 K chrome.exe 2568 Console 1 43,052 K chrome.exe 272 Console 1 75,988 K chrome.exe 7328 Console 1 53,240 K PaprPort.exe 7976 Console 1 137,152 K pplinks.exe 7500 Console 1 14,052 K ppscanmg.exe 5744 Console 1 18,996 K taskeng.exe 7388 Console 1 6,308 K SearchProtocolHost.exe 8024 Services 0 8,804 K SearchFilterHost.exe 7232 Services 0 7,848 K chrome.exe 8016 Console 1 37,440 K cmd.exe 7692 Console 1 3,096 K conhost.exe 7516 Console 1 5,872 K tasklist.exe 8160 Console 1 5,772 K WmiPrvSE.exe 7684 Services 0 6,400 K Any help with this would be greatly appreciated, I've been beating my head against a wall over this all day. This computer serves dual purpose as the main company document server and the Owner's work computer, it's fairly important it be fully functional and I cannot figure this out.

    Read the article

  • Graphics card initialisation problems when booting - requires a "double" boot

    - by DMA57361
    Problem Outline When booting from cold (and my machine is disconnected from main power when off, but leaving it connected doesn't help) the graphics card (single PCI-e card GeForce 460) will not initialise on the first boot, leaving me with the motherboards on-board graphics (which kick in automatically if no PCI-e card is found). However, if I restart the computer - normally I do this by powering it off just after the numlock lights up on the keyboard (ie, just after POST/BIOS and before Windows takes over), wait for the system to whirr down, and power up again - the graphics card will work correctly. Once double-booted in this matter the system seems to work correctly - with no noticeable problems. This is reproducible every time I try to boot - it has been working like this for about a month now. Background Information Sept 2010 - I suffered a hardware malfunction (crashes in Windows and graphics corruption on BIOS screens). By way of spare hardware I determined that replacing the PSU removed the issue, so I replaced the PSU with a brand new one of slightly higher power (460W replaced with 500W). Oct 2010 - The problem resurfaced. I purchased a new graphics card (GeForce 460), which removed the problem. The new graphics card immediately started having the boot initialisation problems mentioned. I presumed there was a motherboard fault all along, but because the system worked once booted, and I was temporarily out of spare money, I left the system alone and continued to use it. Early/Mid Dec 2010 - In the space of 5 days I recieved 3 instances of hard drive corruption (seemlingly fixed by chkdsk and sfc in each case...). Since I was already under the impression the motherboard was faulty, I purchased a new one ASAP, this also required new RAM (as I dropped from 4 slots to 2 and didn't want to drop mem quantity). Past 3-4 weeks - With a brand new PSU, Graphics Card, Motherboard and RAM I'm suffering the problem outlined above. So, what could be causing this and how do I can resolve it? Additional Notes Once double-booted the system seems to work entirely correctly. The graphics card problem has occured on two entirely different motherboards. I do not have the opportunity to test the graphics card in a different computer (I've only the old motherboard, which is dubious, or a really old desktop that still has an AGP port). Under load (ie, modern games for long enough for temperatures to plateau) the system remains stable and performs as expected. The software that came with the new motherboard and SpeenFan both report all voltages and temperatures are within nominal bounds, when idle and when under load. I've looking over the BIOS settings for my motherboard multiple times and can find nothing that helps. This system is configured to run with everything at standard levels - no overclocking. I've tried booting the system with only the mobo and graphics card connected (thinking maybe my new PSU was too weak for the new gfx card, even though it meets the quoted PSU requirements for the card) but the same problem persists (and really if the PSU was weak I'd have problems with the system under load). When the gfx card does not initialise the fan on its cooling unit is running, possibly slower than otherwise - but this measurement is by eye and so unreliable.

    Read the article

  • Windows does not recognize DVDs inserted into Blu-ray drive

    - by icemanind
    I am having a problem with a Blu-ray drive I have in my PC. Its a Blu-ray reader drive and it reads and writes CDs and DVDs. My drive has been working great for about a year now, but for some reason now, when I insert a DVD, Windows 7 doesn't recognize that there is a disc in the drive. I have to eject the disc and insert it again. I sometimes have to do this like 30 times before it "catches" and Windows 7 recognizes the disc. My discs are not scratched up. It does it even with brand new discs. I've tried about 10 different DVDs and the same problem happens. One thing that is weird though is that the problem does not seem to happen when I insert Blu-ray discs. The problem only happens with DVD discs. I tried running a drive lens cleaner. Same issue. Any suggestions?

    Read the article

  • Creating fillable, saveable PDF in OpenOffice.org results in garbage

    - by Ubuntourist
    I've been creating beautiful fillable PDFs using OOo Writer under Ubuntu for a few years. However, I've recently been asked to make them saveable rather than just printable. So, I go to my colleague's Windows computer which has Adobe Acrobat Professional 8, and following directions outlined in Save filled form in PDF file in Ubuntu. I end up with an unreadable, unfillable document. Acrobat Reader opens it, but it's garbage. It looks like it might be a character encoding issue. The document was created using Arial under Ubuntu. I installed OOo on the Windows box and changed the font to Tahoma. But with either font, the resulting file is a jumble of boxes and oddly placed random characters. Given that it fails with a fairly ubiquitous font, and a Microsoft specific font, I'm guessing it's not a font issue. Until I enable the rights, the PDF is readable both with Acrobat Reader and Acrobat Pro. Anyone else encounter the problem? If so, did you solve it? Thanks.

    Read the article

  • Huawei E170 on Linux?

    - by torbengb
    Related to this question, I need to know if the specific combination of Ubuntu 9.10 + the Huawei E170 (HSDPA broadband modem USB stick) will work? Bonus points for a link to a webpage that decsribes exactly how it is done! Specifically, I'm in Austria and the telco is A1, but I hope that the setup would be the same regardless of location/provider. I have found these two pages that seem horribly complicated to a Linux noob. Is there a simpler way, or do I really need to dive into that? Your input is much appreciated! If I can get confirmation that it's supported, then I'd switch to Ubuntu Netbook Remix, because I'm already running Ubuntu on the main pc at home and I'd like to keep things simple.

    Read the article

  • Change default application of a URI scheme in Google Chrome

    - by KiL
    I accidentally make Pidgin the default app for Yahoo Messenger URI scheme (ymsgr://) in Google Chrome. Now, whenever I click on a Yahoo Messenger URI scheme, instead of appearing a popup chat box, nothing happens. How can I change the default app to associate with this URI scheme back to Yahoo Messenger? I found a similar problem here. But I am using Windows 7, not Ubuntu, so the solution cannot be applied in my situation.

    Read the article

  • User Profile cannot be loaded - Windows 7

    - by Ryan
    After uninstalling an HP Vector Mouse driver, then rebooting, when Windows tries to auto log me in, i get an error message saying tyhe following: The User Profile Service failed the Login. User Profile cannot be loaded. Due to the fact that it is the only account on this PC, I cannot even go into another account. I rebooted the machine several times, before going into Safe Mode with Networking. For some reason, I cannot create a new account whilst in safe mode (I think it is to do with UAC, nothing with UAC is clickable). Thus, I am stuck. I cannot get into my account, nor can I create a new one to copy files over to. Any ideas? Thanks in advance! Ryan EDIT: System Restore was, for some reason turned off. Thus, I cannot restore to a working point.

    Read the article

  • Is it reasonable to have multiple SSH keys?

    - by Leonid Shevtsov
    So far I've created a separate SSH key for each server I need to login to (for each purpose, to be more accurate). I did it out of a sense of security, just like different passwords to different sites. Does having multiple SSH keys actually improve security? All of them are used from the same machine, are located in the same ~/.ssh, most even have the same passphrase. So... should I give up the whole system and just use one SSH key for everything?

    Read the article

  • Windows 7 on laptop hard drive does not boot after installing Windows to Go on external hard drive

    - by user1687031
    Just successfully installed and ran Windows 8's Windows to Go on a USB external hard drive. However, after shutting down and removing the USB hard disk, whey I to start my laptop (with only Windows 7 installed), but it doesn't boot and trying to repair it doesn't work. It seems that Windows 8 had corrupted the partition table on the laptop's hard drive, causing Windows 7 to fail to boot. How do I fix that and avoid future problems of the same type?

    Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >