Search Results

Search found 18395 results on 736 pages for 'admin interface'.

Page 128/736 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• Can't configure frame relay T1 on Cisco 1760

  - by sonar

  For the past few days I've been trying to configure a data T1 via a Frame Relay. Now I've been pretty unsuccessful at it, and it's been a while, since I've done this so please bare with me. The ISP provided me the following information: 1. IP address 2. Gateway address 3. Encapsulation Frame Relay 4. DLCI 100 5. BZ8 ESF (I think the bz8 was supposed to be b8zs) 6. Time Slot (1 al 24). And what I have configured up until now is the following: interface Serial0/0 ip address <ip address> 255.255.255.252 encapsulation frame-relay service-module t1 timeslots 1-24 frame-relay interface-dlci 100 sh service-module s0/0 (outputs): Module type is T1/fractional Hardware revision is 0.128, Software revision is 0.2, Image checksum is 0x73D70058, Protocol revision is 0.1 Receiver has no alarms. Framing is **ESF**, Line Code is **B8ZS**, Current clock source is line, Fraction has **24 timeslots** (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec. Last module self-test (done at startup): Passed Last clearing of alarm counters 00:17:17 loss of signal : 0, loss of frame : 0, AIS alarm : 0, Remote alarm : 2, last occurred 00:10:10 Module access errors : 0, Total Data (last 1 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Data in current interval (138 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs sh int: FastEthernet0/0 is up, line protocol is up Hardware is PQUICC_FEC, address is 000d.6516.e5aa (bia 000d.6516.e5aa) Internet address is 10.0.0.1/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:20:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 191 packets output, 20676 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Serial0/0 is up, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 157, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 23, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 2/0, interface broadcasts 0 Last input 00:24:51, output 00:00:05, output hang never Last clearing of "show interface" counters 00:27:20 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1152 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 23 packets input, 302 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 1725 input errors, 595 CRC, 1099 frame, 0 overrun, 0 ignored, 30 abort 246 packets output, 3974 bytes, 0 underruns 0 output errors, 0 collisions, 48 interface resets 0 output buffer failures, 0 output buffers swapped out 4 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Serial0/0.1 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never Serial0/0.100 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU Internet address is <ip address>/30 MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never And everything seems to be accounted for to me, but apparently I'm missing something. My issue is that I'm stuck on interface up, line protocol down, so the T1 doesn't go up. Any ideas? Thank you,

  Read the article

• PHPthumbFactory file not found on upload

  - by ida

  library: http://wiki.github.com/masterexploder/PHPThumb/basic-usage i am using the PhpThumbFactory library to crop and upload an image. the error im receiving is this: Fatal error: Uncaught exception 'Exception' with message 'Image file not found: ' in /www/iaddesign/admin/classes/phpthumb/ThumbBase.inc.php:193 Stack trace: #0 /www/iaddesign/admin/classes/phpthumb/ThumbBase.inc.php(172): ThumbBase-triggerError('Image file not ...') #1 /www/iaddesign/admin/classes/phpthumb/ThumbBase.inc.php(110): ThumbBase-fileExistsAndReadable() #2 /www/iaddesign/admin/classes/phpthumb/GdThumb.inc.php(96): ThumbBase-_construct('', false) #3 /www/iaddesign/admin/classes/phpthumb/ThumbLib.inc.php(127): GdThumb-_construct('', Array, false) #4 /www/iaddesign/admin/portfolio.php(29): PhpThumbFactory::create('') #5 {main} thrown in /www/iaddesign/admin/classes/phpthumb/ThumbBase.inc.php on line 193 here is the snippet that is for the image to be uploaded. /* -------------------------------------------------------------------- */ /* SAVE ICONS */ /* -------------------------------------------------------------------- */ $icononsrc = $_FILES['iconoff']['tmp_name']; $iconoffsrc = $_FILES['iconon']['tmp_name']; $thumboff = PhpThumbFactory::create($iconoffsrc); $thumbon = PhpThumbFactory::create($icononsrc); $thumboff->adaptiveResize(200,151); $thumbon->adaptiveResize(200,151); $thumboffname = "uploads/".$_FILES['iconoff']['name']; $thumbonname = "uploads/".$_FILES['iconon']['name']; $thumboff->save($thumboffname, 'jpg'); $thumbon->save($thumbonname, 'jpg');

  Read the article

• CodeIgniter, Godaddy, htaccess passing variable through url, HMVC

  - by user1492738

  I have a new controller in a module created with HMVC (admin), but i tried also without HMVC and the same issue. I am trying to pass a variable to index or another method from controller but when i access it i receive 404 error, not found. I am new to Codeigniter. I am trying to do resolve this since yesterday, please help me :) Thank you! Route: $route['default_controller'] = 'pages/view/home'; -- working $route['(:any)'] = "pages/view/$1"; -- working $route['404_override'] = ''; -- working $route['admin'] = 'admin/index'; -- working $route['admin/list'] = 'admin/list_pages/index'; -- working $route['admin/edit/(:any)'] = 'admin/edit/index/$1'; -- this is the problem, the other rules are working HTACCESS: RewriteEngine on RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?$1 [L] Controller: class Edit extends CI_Controller{ function __construct() { parent::__construct(); $this->load->model('pages_model'); } function index($id = 0){ $data['page'] = $this->pages_model->get_pages_by_id($id); $this->load->view('header', $data); $this->load->view('edit', $data); $this->load->view('footer', $data); } } Config: $config['base_url'] = ''; $config['index_page'] = 'index.php?'; $config['uri_protocol'] = 'QUERY_STRING';

  Read the article

• kohana project structure

  - by user176217

  Hello Guys. I'm investigating using Kohana for my next project. The site will consist of user registration (and hence user profiles) where users will have certain privileges. The site will also have an admin section where administrators can go to say block a user or delete a post or look at usage statistics for example. A good comparison site would be a multi-user blog, where each blogger depending on her/his permissions can post/edit/delete blogs...just as an example. Firstly, I'm not sure about how to set up the controller/view structure in order to separate the admin section from the front facing site. I'm using Kohana 3, so I was thinking of a controller structure like so: application/classes/controller/front (front facing)...and application/classes/controller/admin (for administrative section). Or I notice you may be able to use the Route class to set up routes, so I could set up an "admin" route. for example: www.example.com/admin will lead to the admin logon screen. www.example.com --- front controller. As well, can I somehow separate the "Admin" views and controllers from the "front facing" views and controllers like divide them up based on folder structure? Any help is very much appreciated. Thank you.

  Read the article

• GoDaddy Subdomain Hosting Issue/Question with Disk Access (C#/ASP.NET 3.5)

  - by Vogel

  This isn't a very complicated scenario really, but as I start to type out the problem I'm realizing how convoluted it can become textually. Let me try and be very clear: First, the set up... I have a C#/ASP.NET web application that is publicly facing on my main domain (www), let's call it www.mysite.com. Nothing fancy, just a front-end that connects to SQL to display records. Then, I have a second C#/ASP.NET web application that is secured using forms authentication running on a subdomain, let's call it admin.mysite.com. This is a very light-weight CMS system to administer the public site. Now, the problem... Both of these sites run fine for basic tasks, however, my problem arises when I try to gain access to the file system for uploading. GoDaddy requires subdomains to run as a virtual directories under the main application in IIS (so the subdomains actually resolve/re-direct to www.mysite.com/admin when you type in admin.mysite.com), but because of this I am unable to write to my website root from the subfolder. Let me explain a little more... The CMS system (running as a virtual directory) gives the admin the ability to upload photos for display on the main site, the target folder of which is www.mysite.com/images - when attempting disk access from the root app, I am able to write to the virtual directory, but cannot do the opposite -- that is, write to the root from the virtual directory, getting security violations. If I can only upload to the /admin/ virtual directory, the entire point is moot because it's a secured folder that the public can't see! The only solution I can think of is to upload the files to the /admin/ virtual directory, then call a URL in the root that moves files from /admin/ back to the root, but that is entirely ghetto. I hope this post makes sense. Anyone else experience anything like this? The bottom line is that it seems virtual directories ONLY have access to themselves, and not their parent directories, no matter what credentials are used. Thanks!

  Read the article

• iphone localization

  - by hardik

  hello all when i run the command to generate Localizable.string file from my terminal it says me bad entry in to the classes file the file gets generated but it has no entry in it infact it should have entry in it. Here is what i am running in my terminal but somehow it is not happening please guide me need to solve this Last login: Mon Jun 7 18:02:09 on ttys000 comp10:~ admin$ cd .. comp10:Users admin$ cd .. comp10:/ admin$ cd /Users/admin/Desktop/localisationwithcode comp10:localisationwithcode admin$ sudo usage: sudo -K | -L | -V | -h | -k | -l | -v usage: sudo [-HPSb] [-p prompt] [-u username|#uid] { -e file [...] | -i | -s | <command> } comp10:localisationwithcode admin$ genstrings Classes/*.m Bad entry in file Classes/localisationwithcodeViewController.m (line = 35): Argument is not a literal string. Bad entry in file Classes/localisationwithcodeViewController.m (line = 36): Argument is not a literal string. Bad entry in file Classes/localisationwithcodeViewController.m (line = 37): Argument is not a literal string. Bad entry in file Classes/localisationwithcodeViewController.m (line = 38): Argument is not a literal string. 2010-06-07 18:04:45.047 genstrings[3851:10b] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35 comp10:localisationwithcode admin$

  Read the article

• 2 different routes on one page?

  - by Dejan.S

  Hi I'm pretty new with MVC2 or MVC in general. If it's one thing I get caught up with it's routes. Like now I got this scenario. Im going from the regular site to Admin. My navigation is the same partialview on both I just do a check which data to render something like this. <% if (!Request.RawUrl.Contains("Admin")){%> <% foreach (var site in Model) { %> <%= Html.MenuItem(site.BelongSite, "Sida", "Site", site.BelongSite) %> | <%} %> <%} else {%> <%= Html.ActionLink("Konfig", "Konfigurera", "Admin") %> <% } %> My route looks like this routes.MapRoute( "Admin", // Route name "Admin/{action}/{name}", // URL with parameters new { controller = "Admin", action = "konfigurera", name = UrlParameter.Optional } // Parameter defaults ); On my View called Konfigurera I got Edit sites and they use the route above and it works great. The navigation tho dont get no action assigned to it. It's just <a href='Admin/'> The navigation is in the shared folder, and it is a strongly typed. Any Ideas? I been struggling with this for about a hour now Thanks for any input

  Read the article

• writing CMS in ZEND

  - by Neoman

  Hello guys, I'm trying to write my own CMS using Zend framework and I created modular structure. I have modules like 'news', 'blog' and etc. Also I have "admin" module which has different layout and this is like the administrator panel where admin can edit all the content and etc. But the problem is that I'm looking for the best practice and solution to solve the problem. I don't like the idea that my admin module will have a lot of controllers which will be for administer all the other modules. So I want to ask you all, maybe you have some tuts or just have an advice how to implement admin module separated from other modules as much as it can be done. Because I just want to copy one module for example from one project to another and I want it will work same. I don't want to search the right admin controller, view or something like this in admin module and copy this part seperatelly into new admin module. Hope the question and situation is clear enough and I will be happy to hear any advice or see any tutorials how to do it. Thanks guys!

  Read the article

• Fast, easy, and secure method to perform DB actions with GET

  - by rob - not a robber

  Hey All, Sort of a methods/best practices question here that I am sure has been addressed, yet I can't find a solution based on the vague search terms I enter. I know starting off the question with "Fast and easy" will probably draw out a few sighs, so my apologies. Here is the deal. I have a logged in area where an ADMIN can do a whole host of POST operations to input data relating to their profile. The way I have data structured is pretty distinct and well segmented in most tables as it relates to the ID of the admin. Now, I have a table where I dump one type of data into and differentiate this data by assigning the ADMIN's unique ID to each record. In other words, all ADMINs have this one type of data writing to this table. I just differentiate by the ADMIN ID with each record. I was planning on letting the ADMIN remove these records by clicking on a link with a query string - obviously using GET. Obviously, the query structure is in the link so any logged in admin could then exploit the URL and delete a competitor's records. Is the only way to safely do this through POST or should I pass through the session info that includes password and validate it against the ADMIN ID that is requesting the delete? This is obviously much more work for me. As they said in the auto repair biz I used to work in... there are 3 ways to do a job: Fast, Good, and Cheap. You can only have two at a time. Fast and cheap will not be good. Good and cheap will not have fast turnaround. Fast and good will NOT be cheap. haha I guess that applies here... can never have Fast, Easy and Secure all at once ;) Thanks in advance...

  Read the article

• Discusses some issues related to mvc2.0

  - by hao123

  ???????????????,???????? ??: ???????:1????????2????????3???? ?????????????? ??????:1???????:http://demo.com/admin/News/index 2???????:http://demo.com/s7mmer/News/index 3?????:http://demo.com/News/index ??asp.net mvc1.0???????????,?????,??asp.net mvc2.0???Areas?? ??: ???????,?????????????Admin?areas,??VS?????????????areas????,????????????????? ??????????: 1?????????Areas???? 2??Areas ???????? 3?????,?Areas?????????MyAreaRegistration.cs ????: ?? using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Mvc; using System.Web.Routing; namespace S7mmer.Web { public class AdminAreaRegistration : AreaRegistration { public override string AreaName { get { return "Admin"; } } public override void RegisterArea(AreaRegistrationContext context) { //?????????? context.MapRoute( "AdminController_default", "Admin/{controller}/{action}/{id}", new { controller = "Home", action = "Index", id = "" }, // Parameter defaults new string[] { "S7mmer.Web.Areas.Admin.Controllers" }//controllers????? ); } } public class S7mmerAreaRegistration : AreaRegistration { public override string AreaName { get { return "S7mmer"; } } public override void RegisterArea(AreaRegistrationContext context) { //?????????? context.MapRoute( "S7mmerController_default", "S7mmer/{controller}/{action}/{id}", new { controller = "Home", action = "Index", id = "" }, // Parameter defaults new string[] { "S7mmer.Web.Areas.S7mmer.Controllers" }//controllers????? ); } } public class WebSiteAreaRegistration : AreaRegistration { public override string AreaName { get { return "WebSite"; } } public override void RegisterArea(AreaRegistrationContext context) { //?????????? context.MapRoute( "WebSiteController_default", "{controller}/{action}/{id}", new { controller = "Home", action = "Index", id = "" }, // Parameter defaults new string[] { "S7mmer.Web.Areas.WebSite.Controllers" }//controllers????? ); } } } 4??Areas?????Admin????????NewsController.cs 5??NewsController.cs??public ActionResult Index()?????view,??? ???news????index.aspx 6????????Global.asax??,?Application_Start()????AreaRegistration.RegisterAllAreas(); protected void Application_Start() { AreaRegistration.RegisterAllAreas(); // RegisterRoutes(RouteTable.Routes); } ????? http://localhost:1108/admin/News/index,??????????! ??????????????????,???????????????,????

  Read the article

• How to layout class definition when inheriting from multiple interfaces

  - by gabr

  Given two interface definitions ... IOmniWorkItem = interface ['{3CE2762F-B7A3-4490-BF22-2109C042EAD1}'] function GetData: TOmniValue; function GetResult: TOmniValue; function GetUniqueID: int64; procedure SetResult(const value: TOmniValue); // procedure Cancel; function DetachException: Exception; function FatalException: Exception; function IsCanceled: boolean; function IsExceptional: boolean; property Data: TOmniValue read GetData; property Result: TOmniValue read GetResult write SetResult; property UniqueID: int64 read GetUniqueID; end; IOmniWorkItemEx = interface ['{3B48D012-CF1C-4B47-A4A0-3072A9067A3E}'] function GetOnWorkItemDone: TOmniWorkItemDoneDelegate; function GetOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; procedure SetOnWorkItemDone(const Value: TOmniWorkItemDoneDelegate); procedure SetOnWorkItemDone_Asy(const Value: TOmniWorkItemDoneDelegate); // property OnWorkItemDone: TOmniWorkItemDoneDelegate read GetOnWorkItemDone write SetOnWorkItemDone; property OnWorkItemDone_Asy: TOmniWorkItemDoneDelegate read GetOnWorkItemDone_Asy write SetOnWorkItemDone_Asy; end; ... what are your ideas of laying out class declaration that inherits from both of them? My current idea (but I don't know if I'm happy with it): TOmniWorkItem = class(TInterfacedObject, IOmniWorkItem, IOmniWorkItemEx) strict private FData : TOmniValue; FOnWorkItemDone : TOmniWorkItemDoneDelegate; FOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; FResult : TOmniValue; FUniqueID : int64; strict protected procedure FreeException; protected //IOmniWorkItem function GetData: TOmniValue; function GetResult: TOmniValue; function GetUniqueID: int64; procedure SetResult(const value: TOmniValue); protected //IOmniWorkItemEx function GetOnWorkItemDone: TOmniWorkItemDoneDelegate; function GetOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; procedure SetOnWorkItemDone(const Value: TOmniWorkItemDoneDelegate); procedure SetOnWorkItemDone_Asy(const Value: TOmniWorkItemDoneDelegate); public constructor Create(const data: TOmniValue; uniqueID: int64); destructor Destroy; override; public //IOmniWorkItem procedure Cancel; function DetachException: Exception; function FatalException: Exception; function IsCanceled: boolean; function IsExceptional: boolean; property Data: TOmniValue read GetData; property Result: TOmniValue read GetResult write SetResult; property UniqueID: int64 read GetUniqueID; public //IOmniWorkItemEx property OnWorkItemDone: TOmniWorkItemDoneDelegate read GetOnWorkItemDone write SetOnWorkItemDone; property OnWorkItemDone_Asy: TOmniWorkItemDoneDelegate read GetOnWorkItemDone_Asy write SetOnWorkItemDone_Asy; end; As noted in answers, composition is a good approach for this example but I'm not sure it applies in all cases. Sometimes I'm using multiple inheritance just to split read and write access to some property into public (typically read-only) and private (typically write-only) part. Does composition still apply here? I'm not really sure as I would have to move the property in question out from the main class and I'm not sure that's the correct way to do it. Example: // public part of the interface interface IOmniWorkItemConfig = interface function OnExecute(const aTask: TOmniBackgroundWorkerDelegate): IOmniWorkItemConfig; function OnRequestDone(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; function OnRequestDone_Asy(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; end; // private part of the interface IOmniWorkItemConfigEx = interface ['{42CEC5CB-404F-4868-AE81-6A13AD7E3C6B}'] function GetOnExecute: TOmniBackgroundWorkerDelegate; function GetOnRequestDone: TOmniWorkItemDoneDelegate; function GetOnRequestDone_Asy: TOmniWorkItemDoneDelegate; end; // implementing class TOmniWorkItemConfig = class(TInterfacedObject, IOmniWorkItemConfig, IOmniWorkItemConfigEx) strict private FOnExecute : TOmniBackgroundWorkerDelegate; FOnRequestDone : TOmniWorkItemDoneDelegate; FOnRequestDone_Asy: TOmniWorkItemDoneDelegate; public constructor Create(defaults: IOmniWorkItemConfig = nil); public //IOmniWorkItemConfig function OnExecute(const aTask: TOmniBackgroundWorkerDelegate): IOmniWorkItemConfig; function OnRequestDone(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; function OnRequestDone_Asy(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; public //IOmniWorkItemConfigEx function GetOnExecute: TOmniBackgroundWorkerDelegate; function GetOnRequestDone: TOmniWorkItemDoneDelegate; function GetOnRequestDone_Asy: TOmniWorkItemDoneDelegate; end;

  Read the article

• Network monitoring tools with API features

  - by Kev

  We use ks-soft's Advanced Hostmonitor package to monitor around 2000 items on our network. We think it's great, the chap that supports it is fantastic, the product is fast, stable and mature but I feel as as we grow as a company it's beginning to show some friction points in the area of integration with our back office admin systems. One of the things we'd like to do is be able to add new tests to whatever monitoring tool we use via an API. For example, when orders for servers come from our retail interface, the server gets built automatically, and as part of the automated build process we'd like to automatically add new tests to the network monitoring systems. Hostmonitor has some support for this via a feature called HM Script but we're starting to encounter some speedbumps - we can't add new operators/users we can't define new "Action Profiles" - these are the actions to be taken when a test goes good or bad. What we love about hostmonitor though are the Action Profiles. For example if a Windows IIS box goes bad our action profile for a bad test does something like: Check host again (one time) Wait another 30 seconds then test again Try restart app pool on remote machine (up to two times) Send an email to ops about the restart failure Try restarting IIS on remote machine (up to four times) Page duty admin (up to 5 times - stops after duty admin ACKS alert) Page backup duty admin (5 times - stops after duty admin ACKS alert) I'm starting to look around at other network monitoring tools and I'm looking for: a comprehensive API to be able to add/remove/control tests/test "action profiles"/operators (not just plugins, we need control and admin interfaces) the ability to have quite detailed action/escalation profiles (and define these via an API) I've looked at Nagios and Icinga but Ican't seem to glean from their documentation whether we could have these features or not, or if we could, how much work would be involved to implement/customise. Can anyone provide any advice, guidance or experiences?

  Read the article

• ScreenOS MIP selection for outbound connections

  - by David Mackintosh

  Given a ScreenOS 6.3.0 firewall with this configuration: unset flow reverse-route clear-text set interface "ethernet0/0" zone "Trust" set interface ethernet0/0 ip 192.168.1.1/24 set interface ethernet0/2 ip 10.0.0.1/24 set interface ethernet0/2 mip 10.9.9.10 host 192.168.1.10 netmask 255.255.255.255 vr trust-vr set interface ethernet0/2 mip 10.8.8.10 host 192.168.1.10 netmask 255.255.255.255 vr trust-vr set route 0.0.0.0/0 interface ethernet0/2 gateway 10.0.0.254 ... (and assuming appropriate policies) is there a way to control which MIP the firewall selects for outbound connections initiated by 192.168.1.10? (presumably because I want the upstream 10.0.0.254 to do different things with the packet depending on what its source IP is). Update: OK, my scenario is this: I have two ISP uplinks, each giving me a different IP space. Each ISP will only route the IP space they have assigned me. So in order for the server to be reachable by both ISPs, I need two MIPs for the same server, one on each interface. Inbound traffic will work fine with the 'unset flow reverse-route clear-text' option in use. But for outbound (think an email server sending a message) I need a way to select an appropriate MIP depending on which outbound link I want the system to use, and I want this to be resiliant so that if the link the firewall prefers goes down overnight I don't have to manually flip something to keep the mail flowing. Basically I'm trying to avoid having to buy a link-balancer appliance (or two since I'll need a cluster). Is there a way to do this?

  Read the article

• Ruby 1.9.3 - Bundler - Graylog2

  - by Arenstar

  im having a strange problem with bundler. Using ruby 1.8 the following works fine however not with 1.9 it always results in Could not find rake-0.9.2.2 in any of the sources Run `bundle install` to install missing gems. i dont understand why, but it functions correctly with rvm. I can not however use rvm, this is not a solution to my problem Install Ruby cd /usr/local/src wget http://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.3-p194.tar.gz tar xzf ruby-1.9.3-p194.tar.gz && cd ruby-1.9.3-p194 ./configure --prefix=/opt/lp/ruby-1.9.3-test make all && make install Install Graylog cd /usr/local/src wget https://github.com/downloads/Graylog2/graylog2-web-interface/graylog2-web-interface-0.9.6p1.tar.gz tar xzf graylog2-web-interface-0.9.6p1.tar.gz cd graylog2-web-interface-0.9.6p1 Setup Graylog cd /usr/local/src/graylog2-web-interface-0.9.6p1 sed -i "3 i gem 'thin', '~> 1.3.1'" Gemfile /opt/lp/ruby-1.9.3-test/bin/gem install bundle /opt/lp/ruby-1.9.3-test/bin/bundle install --path vendor/bundle --binstubs Begin the Test cd /usr/local/src/graylog2-web-interface-0.9.6p1 /opt/lp/ruby-1.9.3/bin/bundle exec bin/rake #Could not find rake-0.9.2.2 in any of the sources #Run `bundle install` to install missing gems. cd /usr/local/src/graylog2-web-interface-0.9.6p1 /opt/lp/ruby-1.9.3/bin/bundle exec bin/thin -e production -S test.sock -c . -R config.ru start #Could not find rake-0.9.2.2 in any of the sources #Run `bundle install` to install missing gems. Where am i going wrong?

  Read the article

• WBadmin script to backup System State into another partition failed ?

  - by Albert Widjaja

  Hi Everyone, I tried numerous time but it is still failed like the following script on cmd prompt. Is there any way to create automated script to backup system state on my Windows Server 2008 using WBAdmin into D drive inside a directory ? any help would be greatly appreciated. C:\Users\Administratorwbadmin START SYSTEMSTATEBACKUP -backuptarget:D:\Admin\Backup wbadmin 1.0 - Backup command-line tool (C) Copyright 2004 Microsoft Corp. Starting System State Backup [12/02/2011 4:22 AM] Retrieving volume information... This would backup the system state from volume(s) SYS(C:) to D:\Admin\Backup. Do you want to start the backup operation? [Y] Yes [N] No Y ERROR - Specified backup location could not be found. C:\Users\Administratorwbadmin START SYSTEMSTATEBACKUP -backuptarget:D:\Admin wbadmin 1.0 - Backup command-line tool (C) Copyright 2004 Microsoft Corp. Starting System State Backup [12/02/2011 4:22 AM] Retrieving volume information... This would backup the system state from volume(s) SYS(C:) to D:\Admin. Do you want to start the backup operation? [Y] Yes [N] No Y ERROR - Specified backup location could not be found. C:\Users\Administratorwbadmin START SYSTEMSTATEBACKUP -backuptarget:"D:\Admin\Backup" -quiet wbadmin 1.0 - Backup command-line tool (C) Copyright 2004 Microsoft Corp. Starting System State Backup [12/02/2011 4:23 AM] Retrieving volume information... This would backup the system state from volume(s) SYS(C:) to D:\Admin\Backup. ERROR - Specified backup location could not be found. C:\Users\Administratorwbadmin START SYSTEMSTATEBACKUP -backuptarget:D:\ -quiet wbadmin 1.0 - Backup command-line tool (C) Copyright 2004 Microsoft Corp. Starting System State Backup [12/02/2011 4:23 AM] Retrieving volume information... This would backup the system state from volume(s) SYS(C:) to D:. ERROR - Specified backup location could not be found. C:\Users\Administrator

  Read the article

• ipmi - can't ping or remotely connect

  - by Fidel

  I've tried configuring the IPMI controller to accept remote connections, but I can't even ping it. Here is it status: #/usr/local/bin/ipmitool lan print 2 Set in Progress : Set Complete Auth Type Support : NONE PASSWORD Auth Type Enable : Callback : : User : NONE PASSWORD : Operator : PASSWORD : Admin : PASSWORD : OEM : IP Address Source : Static Address IP Address : 192.168.1.112 Subnet Mask : 255.255.255.0 MAC Address : 00:a0:a5:67:45:25 IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Enabled Gratituous ARP Intrvl : 8.0 seconds Default Gateway IP : 192.168.1.1 Default Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3 Cipher Suite Priv Max : uaaaXXXXXXXXXXX : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM # /usr/local/bin/ipmitool user list 2 ID Name Enabled Callin Link Auth IPMI Msg Channel Priv Limit 1 true false true true USER 2 admin true false true true ADMINISTRATOR # /usr/local/bin/ipmitool channel getaccess 2 2 Maximum User IDs : 5 Enabled User IDs : 2 User ID : 2 User Name : admin Fixed Name : No Access Available : callback Link Authentication : enabled IPMI Messaging : enabled Privilege Level : ADMINISTRATOR # /usr/local/bin/ipmitool channel info 2 Channel 0x2 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : multi-session Active Session Count : 0 Protocol Vendor ID : 7154 Volatile(active) Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available Non-Volatile Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available # /usr/local/bin/ipmitool chassis status System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : unknown Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false # arp Address HWtype HWaddress Flags Mask Iface 192.168.1.112 ether 00:A0:A5:67:45:25 C bond0 # /usr/local/bin/ipmitool -I lan -H 192.168.1.112 -U admin -P admin chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status In summary. It exists on the ARP list so arp's are being broadcast. I can't ping it and can't connect to it. Can anyone spot any glaring mistakes in the configuration? Many thanks, Fidel

  Read the article

• Unable to specify parameters to cvlc in a script

  - by VxJasonxV

  I'm creating a script that issues a few curl commands in order to access a time-protected mms stream link, then set up a relay using cvlc (vlc's command line interface) for my own use on an unencumbered player. The curl aspect of this is working, as I can run as a browser and curl side by side and get the same access url. (It's time locked meaning the stream will work forever, but you have to connect quickly or the URL will time out.) The very end of the script prints the command I will run, which is then followed up by "exec $CMD". When I echo $CMD I get: cvlc --sout '#standard{access=http,mux=asf,dst=0.0.0.0:58194}' mms://[...] Manually Copy/Pasting this command in, verbatim, works perfectly fine, but as part of a script, the cvlc execution output says: [0x9743d0] main interface error: no suitable interface module [0x962120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x9743d0] dummy interface: using the dummy interface module... [0xb16e30] stream_out_standard stream out error: no mux specified or found by extension [0xb16ad0] main stream output error: stream chain failed for `standard{mux="",access="",dst="'#standard{access=http,mux=asf,dst=0.0.0.0:58194}'"}' [0xb11cd0] main input error: cannot start stream output instance, aborting [0xb11f70] signals interface error: Caught Interrupt signal, exiting... Why is --sout behaving one way in a script (non-interactive shell?) vs. another way in the foreground (interactive shell) ?

  Read the article

• Autologin 2 Windows users OR Login another user from the desktop

  - by fpdragon

  I'm using two windows users on my HTPC at the same time. One is just for watching videos and one for administration via remote. This setup is quite ideal for me since windows can handle multiple concurrent logins and the win "rdp concurrent hack" (Google). The problem is, I want both users to be logged in automatically when the pc was started. It shall be possible to watch tv and also the admin user shall be automatically logged in to start my scripts and other tasks, even if I haven't logged in via remote desktop manually. Later, when I want to admin my htpc I can just rdp connect the admin user without interrupting the video playback on the actual HTPC's screen and check my cleanup tasks, downloads, ... witch already executed for this admin user. But right now I found no solution to automatically login user A from a user B desktop and I also found no solution to autologin both users immediately at startup. As a workaround I have to fire up my other notebook machine and login one time with the remote user via rdp. From this time on the remote admin user is running concurrent with the main user in the background of the machine. The other workaround would be... after startup switch user from main user to admin user and then back again. But that also requires manual steps. I'm on a Windows 8 System right now but all infos for Win7 or XP would be also interesting. thanks a lot for all ideas. PS: just to prevent useless posts... don't tell me that only one user can be logged in to windows. ;)

  Read the article

• Unable to run cvlc in a script

  - by VxJasonxV

  I'm creating a script that issues a few curl commands in order to access a time-protected mms stream link, then set up a relay using cvlc (vlc's command line interface) for my own use on an unencumbered player. The curl aspect of this is working, as I can run as a browser and curl side by side and get the same access url. (It's time locked meaning the stream will work forever, but you have to connect quickly or the URL will time out.) The very end of the script prints the command I will run, which is then followed up by "exec $CMD". When I echo $CMD I get: cvlc --sout '#standard{access=http,mux=asf,dst=0.0.0.0:58194}' mms://[...] But the cvlc execution output says: [0x9743d0] main interface error: no suitable interface module [0x962120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x9743d0] dummy interface: using the dummy interface module... [0xb16e30] stream_out_standard stream out error: no mux specified or found by extension [0xb16ad0] main stream output error: stream chain failed for `standard{mux="",access="",dst="'#standard{access=http,mux=asf,dst=0.0.0.0:58194}'"}' [0xb11cd0] main input error: cannot start stream output instance, aborting [0xb11f70] signals interface error: Caught Interrupt signal, exiting... Why is it ignoring my --sout input?

  Read the article

• Cisco access-list confusion

  - by LonelyLonelyNetworkN00b

  I'm having troubles implementing access-lists on my asa 5510 (8.2) in a way that makes sense for me. I have one access-list for every interface i have on the device. The access-lists are added to the interface via the access-group command. let's say I have these access-lists access-group WAN_access_in in interface WAN access-group INTERNAL_access_in in interface INTERNAL access-group Production_access_in in interface PRODUCTION WAN has security level 0, Internal Security level 100, Production has security level 50. What i want to do is have an easy way to poke holes from Production to Internal. This seams to be pretty easy, but then the whole notion of security levels doesn't seam to matter any more. I then can't exit out the WAN interface. I would need to add an ANY ANY access-list, which in turn opens access completely for the INTERNAL net. I could solve this by issuing explicit DENY ACEs for my internal net, but that sounds like quite the hassle. How is this done in practice? In iptables i would use a logic of something like this. If source equals production-subnet and outgoing interface equals WAN. ACCEPT.

  Read the article

• Port mirroring on multiple switches

  - by Matt

  So here is the deal, I have a server on switch A where port 3 is monitoring traffic for most of the ports on switch A. However I have other users on switch B that needs to have port 3 on switch A monitor as well. Is this possible? I have been reading about rspan but doesnt seem to work. Switch A: monitor session 1 source interface fast0/1 - 2 monitor session 1 source interface fast0/4 - 46 monitor session 1 destination interface fast0/3 (this works great for switch A, I need a solution to get switch B to also have some ports sent to port 3 on switch A for monitoring.) Onxx, All the traffic on switch A is fine, there will be about 10-15 ports on switch B that I need to send to fa0/3 on switch A as the destination. I have the switches connected with a ethernet cable with a trunk port on both switches on port 48 on switch B and A and port 47 on A connects to our sonicwall. So I am assuming they are daisy chained? What if I did the following: Switch A monitor session 1 source interface fast0/1 - 2 monitor session 1 source interface fast0/4 - 46 monitor session 1 destination interface fast0/3 Put all of the ports on vlan 10 because I made an rspan vlan 10 On switch B monitor the ports I need will say 1-10 monitor session 1 source interface fast0/1 - 10 monitor session 1 destination remote vlan 10 as a prerequisite I would have created vlan 10 as a rspan vlan on switch B. Switch A Monitor session 1 destination remote vlan 10 Would this work? By the way I am working with cisco catalyst 3560 switches.

  Read the article

• How does one debug Windows network share authentication?

  - by ajs410

  I have machine0 with 32-bit Vista, logged in as a domain user, running a VMWare image of 32-bit Vista, logged in as a local user, with the VM set to bridge the network. From an administrator account (called admin) within the VM, I try to access the hidden C$ share on machine0 (i.e. start - run - "\\machine0\C$\"). I get no prompts for credentials. Worse, machine0 has an admin account (different password), and machine0\admin gets locked out when VM\admin tries to access the network share. I get a message several seconds later, which feels like a cached credential failure leading to the lockout. I have checked several places for cached credentials; net use, Stored Usernames and Passwords, mapped shares. I rebooted (both machine0 and VM) to make sure the session was clear of any cached credentials. I can force net use to use my domain credentials when accessing machine0, and then I can see the share. I can also see shares that do not require credentials. I decided to try another machine on the network (machine1), 64-bit Vista, local user. This machine has no lockout policy, and after several seconds (feels like failed cached credentials again) it prompts me for credentials. After I enter them, it re-prompts me, saying "logon unsuccessful" (tried my domain credentials, and also machine1\admin's). Which is bogus, because I proceed to log on with remote desktop using the machine1\admin credentials. I have tried this on another machine (machine2, 64-bit Vista), running a copy of the same 32-bit VM, and I don't remember having this problem. machine0 has a fingerprint reader...could that try storing passwords and interfere? Are there any places I'm missing where there could be cached credentials? Is there a way to see what credentials are flying around when I try to connect?

  Read the article

• Can't delete folder and I am admin. "You need permission to perform this action. You require permission from..."

  - by Tony_Henrich

  I can't delete a certain folder in windows 7. It's not a system folder. It was created by an app. I get an error message "You need permission to perform this action. You require permission from Tony....". I am an admin and logged in as myself Tony. I have full ownership of the folder with full control permission. I rebooted the machine. I killed the app which created the folder. I am out of ideas. Why is Windows 7 not letting me delete the folder?

  Read the article

• Master does not appear to be a git repository error

  - by EmmyS

  I've inherited a position and instructions for creating a new git repository. Unfortunately I've run into problems and no one here knows what to do. Hoping someone can help me out. Here are the instructions I was left: Create a new repository: For these steps you need to be in the gitosis-admin repository, if you don't have it, in a suitable parent folder do: git clone [email protected]:gitosis-admin.git Edit gitosis.conf file - in gitosis-admin root, under [group base-repo] section, add the name of the new repo to the end of the "writable =" section. Commit change and push back to gitosis-admin master. For the next commands, my_new_project represents the name of your project mkdir my_new_project cd my_new_project git init Copy in any files you want to use to start the repo git commit -a -m "Initializing new repository" git remote add origin [email protected]:my_new_project.git git push master git push master:qa So I did 1 and 2, with no problem. It created a local folder on my machine called gitosis-admin. I edited the gitosis.conf file as indicated. But when I try to do step 3 (which I assume is git push gitosis-admin master) bash tells me that fatal: 'master' does not appear to be a git repository fatal: The remote end hung up unexpectedly What am I doing wrong?

  Read the article

• cisco asa + action drop issue

  - by ghp

  Have created a tunnel between 10.x.y.z network and 122.a.b.c ..the tunnel is up and active, but when I try the packet tracer output ..I get the ACTION as drop. I have also enabled same-security-traffic permit intra-interface. Can someone help me what does this drop mean? Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule Packet Tracer output @Shane Madden: please find below the packet tracer output. CASA5K-A# CASA5K-A# config t CASA5K-A(config)# packet-tracer input inside tcp 10.x.y.112 0 122.a.b.c 0 Phase: 1 Type: ROUTE-LOOKUP Subtype: input Result: ALLOW Config: Additional Information: in 0.0.0.0 0.0.0.0 outside Phase: 2 Type: ACCESS-LIST Subtype: Result: DROP Config: Implicit Rule Additional Information: Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule CASA5K-A(config)# ======================================================================== The access-group are as follows : access-group acl-inbound in interface outside access-group acl-outbound in interface inside and the access-list's are access-list acl-inbound extended permit tcp any any gt 1023 access-list acl-outbound extended permit ip object-group net-Source object net-dest

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >