Search Results

Search found 19411 results on 777 pages for 'browser cache'.

Page 128/777 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

  • Caching queries in Django

    - by dolma33
    In a django project I only need to cache a few queries, using, because of server limitations, a cache table instead of memcached. One of those queries looks like this: Let's say I have a Parent object, which has a lot of Child objects. I need to store the result of the simple query parent.childs.all(). I have no problem with that, and everything works as expected with some code like key = "%s_children" %(parent.name) value = cache.get(key) if value is None: cache.set(key, parent.children.all(), CACHE_TIMEOUT) value = cache.get(key) But sometimes, just sometimes, the cache.set does nothing, and, after executing cache.set, cache.get(key) keeps returning None. After some test, I've noticed that cache.set is not working when parent.children.all().count() has higher values. That means that if I'm storing inside of key (for example) 600 children objects, it works fine, but it wont work with 1200 children. So my question is: is there a limit to the data that a key could store? How can I override it? Second question: which way is "better", the above code, or the following one? key = "%s_children" %(parent.name) value = cache.get(key) if value is None: value = parent.children.all() cache.set(key, value, CACHE_TIMEOUT) The second version won't cause errors if cache.set doesn't work, so it could be a workaround to my issue, but obviously not a solution. In general, let's forget about my issue, which version would you consider "better"?

    Read the article

  • Should I use /etc/bind/zones/ or /var/cache/bind/?

    - by nbolton
    Each tutorial seems to have a different opinion on this. For my ISC BIND zones, should I use /etc/bind/zones/ or /var/cache/bind/? In the last install, I used /var/cache/bind/ but only because I was guided to do so; however I just spotted a pid file in there for this new Debian install, so I figured that using the "working directory" to store zone files probably wasn't the best idea. It seems that many admins use this so they don't have to type the full path when declaring a new zone. For example: file "/etc/bind/zones/db.foobar.com"; Instead of: file "db.foobar.com"; Is obviously easier to type, but is it good or bad practice? Some may also suggest setting the working directory to /etc/bind/zones: options { // directory "/var/cache/bind"; directory "/etc/bind/zones"; } ... but something tells me this isn't good practice, since the pid file would be created there I assume (unless it's just in /var/cache/bind by coincidence). I took a look at the manpage but it didn't seem to say what the directory option was for, any ideas exactly what it was design for?

    Read the article

  • What's with the accesses to $random_existing_file/cache/df.php?

    - by Bernd Jendrissek
    Occasionally I eyeball Apache's access_log and lately I've been noticing these accesses to URLs that I don't serve. They're correctly 404'ed, but I'd like to know just who and what is involved here. "Obviously" it's some sort of vulnerability probing; I'd like to know which. (Not that it affects me, but I like to know the score.) Here's an example: 69.89.31.206 - - [28/Nov/2012:17:36:34 +0200] "GET /cvfull.pdf/cache/df.php HTTP/1.1" 404 489 "-" "-" Oddly, all 26 attempts are to either /cache/df.php, or to /cvfull.pdf/cache/df.php - they come in pairs. A few weeks ago it was zx.php, now it's df.php - I'm assuming the target is the same. Perhaps I should be flattered that a script is thinking of hiring me. Seriously, my CV is one of only two PDF files on my site, so I can only guess that non-PDF URLs aren't interesting? I've tried Googling for "cache df php", but my Google-fu is weak at the best of times, so I can only find a few reports of other script attacks. What's the vulnerability being scanned for here?

    Read the article

  • Can you share offline files cache with two user accounts?

    - by Joel Coehoorn
    I have a new laptop that I use for both home and work. It runs windows 7 ultimate, and is joined to the domain at work. It is okay to use this laptop for both work and personal activities, and I even have an account set up on the local machine in addition to the work domain account specifically for this to help keep the two separate. At home, I have a file server that I use to share files and printers with my wife's laptop, this new laptop, and my old desktop which will now become the family machine. My mp3 library is on there, among other things. What I want to do is use the windows Offline Files feature to keep a synced copy of my music library on the laptop. That part is easy. What's tricky is that I want to share this offline cache between both the local account on the laptop and my work domain account. I could do them both separately, but then I have two copies of a very large music library stored locally. This also means twice the sync burden, when the domain account is rarely connected to the file share. I really want to be able to sync from the local machine account only, and have the domain account be able to use the synced files. I know where the offline file cache is kept (\Windows\CSC) and I can find the cached files (not encrypted), but permissions on the cache are setup weird, and so using that cache directly is not trivial. Any ideas appreciated.

    Read the article

  • How can I configure apache to cache the images that it is serving? Right now it is giving headers t

    - by Tchalvak
    Serving up images that don't seem to cache There's a LAPP (postgresql instead of mysql) running over on http://ninjawars.net. I just recently noticed that images don't seem to be caching with any kind of good frequency as I was reloading a page with a few images on it here: http://www.ninjawars.net/attack_player.php Here is an example image (they're probably all being served exactly the same): http://www.ninjawars.net/images/characters/fighter.png Checking the header, it seems that the caching is set to: Cache-Control:max-age=0 (the full header for this image-like-all-the-others is... Request URL:http://www.ninjawars.net/images/characters/fighter.png Request Method:GET Status Code:200 OK Request Headers Accept:application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,/;q=0.5 Cache-Control:max-age=0 Referer:http://www.ninjawars.net/images/characters/fighter.png User-Agent:Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.3 Safari/533.4 Response Headers Accept-Ranges:bytes Content-Length:938 Content-Type:image/png Date:Thu, 13 May 2010 21:24:07 GMT ETag:"ffd4d-3aa-4837efc120540" Last-Modified:Mon, 05 Apr 2010 15:28:45 GMT Server:Apache ) So what modules or config or htaccess or whatever do I change to have it cache images, e.g. for 24 hours?

    Read the article

  • How to simulate browser form POST method using PHP/cURL

    - by user283266
    I'm trying to simulate browser with POST method using PHP/cURL. When I looked at that live Http header it shows Content-Type: multipart/form-data. I checked on the internet where it was suggested that cURL will send multipart/form-data when a custom headers is specified to Content-Type: multipart/form-data. $headers = array( 'Content-Type' => 'multipart/form-data; boundary='.$boundary ); This didn't work for me either when I print_r(curl_getinfo()) it showed [content_type] => text/html; charset=UTF-8 Which means cURL sent a default headers I also read that sending/uploading a file with cURL will cause data to be send as multipart/form-data. I created a file which curl uploaded but again when I ran curl_getinfo I got [content_type] => text/html; charset=UTF-8 $data_array = array("field" => "@c:\file_location.txt"); I also tried to read a file content so that the only thing sent would be content NOT ATTACHED FILE but this didn't work for me curl_getinfo shows [content_type] => text/html; charset=UTF-8. $data_array = array("field" => "<c:\file_location.txt"); // note @ replaced with < Do I miss somthing here? This is the referer url POST somepath HTTP/1.1 Host: www(dot)domain(dot)com User-Agent: Mozilla/5.0 (Windows) Gecko/13081217 Firefox/3 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Referer: url/some-file.php Content-Type: multipart/form-data; boundary=--------------------------$boundary Content-Length: $some_number ----------------------------$boundary Content-Disposition: form-data; name="$some_Value1" $some_text1 ----------------------------$boundary Content-Disposition: form-data; name="$some_Value2" $some_text2 ----------------------------$boundary Content-Disposition: form-data; name="$some_Value3" $some_text3 ----------------------------$boundary Content-Disposition: form-data; name="$some_Value4" $some_text4 ----------------------------$boundary Content-Disposition: form-data; name="$some_Value5" $some_text5 ----------------------------$boundary Content-Disposition: form-data; name="$some_Value6" $some_text6 ----------------------------$boundary Content-Disposition: form-data; name="$some_Value7" $some_text7 ----------------------------$boundary Content-Disposition: form-data; name="$some_Value8" $some_text8 ----------------------------$boundary Content-Disposition: form-data; name="$some_Value9" ----------------------------$boundary Content-Disposition: form-data; name="$some_Value10" ----------------------------$boundary-- Here is a piece of code. <? //Include files set_time_limit(0); include'body.php'; include'keyword.php'; include'bio.php'; include'summary.php'; include'headline.php'; include'category.php'; include'spin.php'; include'random-text.php'; $category = category(); $headline = headline() ; $summary = summary(); $keyword = keyword(); $body = body(); $bio = bio(); $target="url"; $ref ="url_ref"; $c = "Content-Disposition: form-data; name="; $boundary = "---------------------------".random_text(); $category = category(); $headline = headline() ; $summary = summary(); $keyword = keyword(); $body = body(); $bio = bio(); // emulating content form as it appears on livehttp header $data = "\r\n".$boundary."\r\n".$c."\"pen_id\"\r\n\r\n".$Auth_id."\r\n".$boundary."\r\n".$c."\"cat_id\"\r\n\r\n".category()."\r\n".$boundary."\r\n".$c."\"title\"\r\n\r\n".headline()."\r\n".$boundary."\r\n".$c."\"meta_desc\"\r\n\r\n".summary()."\r\n".$boundary."\r\n".$c."\"meta_keys\"\r\n\r\n".keyword()."\r\n".$boundary."\r\n".$c."\"content\"\r\n\r\n".body()."\r\n".$boundary."\r\n".$c."\"author_bio\"\r\n\r\n".bio()."\r\n".$boundary."\r\n".$c."\"allow_comments\"\r\n\r\ny\r\n".$boundary."\r\n".$c."\"id\"\r\n\r\n\r\n".$boundary."\r\n".$c."\"action\"\r\n\r\n\r\n".$boundary."--\r\n"; // inserting content into a file $file = "C:\file_path.txt"; $fh = fopen($file, 'w+') or die("Can't open file"); fwrite($fh,$data); fclose($fh); // pulling out content from a file as multipart/form-data $data_array = array ("field" => "<C:\file_path.txt"); $headers = array ( 'POST /myhome/article/new HTTP/1.1', 'Host: url', 'User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.20) Gecko/20081217 Firefox/2.0.0.20 (.NET CLR 3.5.30729)', 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9;q=0.8', 'Accept-Language: en-us,en;q=0.5', 'Accept-Encoding: gzip,deflate', 'Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7', 'Keep-Alive: 300', 'Connection: keep-alive', 'Content-Type: multipart/form-data; boundary='.$boundary, 'Content-Length: '.strlen($data), ); # Create the cURL session $ch = curl_init(); curl_setopt($ch, CURLOPT_URL, $target); // Define target site curl_setopt($ch, CURLOPT_POST,1); curl_setopt($ch, CURLOPT_HEADER, $headers); // No http head //curl_setopt($ch, CURLOPT_REFERER, $ref); curl_setopt($ch, CURLOPT_NOBODY, FALSE); curl_setopt($ch, CURLOPT_RETURNTRANSFER, TRUE); // Return page in string curl_setopt($ch, CURLOPT_COOKIEJAR, "c:\cookie\cookies.txt"); // Tell cURL where to write curl_setopt($ch, CURLOPT_COOKIEFILE, "c:\cookie\cookies.txt"); // Tell cURL which cookies //curl_setopt($ch, CURLOPT_USERAGENT, $agent); curl_setopt($ch, CURLOPT_POST, TRUE); curl_setopt($ch, CURLOPT_POSTFIELDS, "$data_array"); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, TRUE); // Follow redirects curl_setopt($ch, CURLOPT_MAXREDIRS, 4); # Execute the PHP/CURL session and echo the downloaded page $page = curl_exec($ch); $err = curl_error($ch); $info =curl_getinfo($ch); # Close the cURL session curl_close($ch); print_r($err); print_r($info); ?>

    Read the article

  • Updated data is not loaded in the same browser(using Ajax )

    - by Mouli
    Initilly load some datas into dropdown list. It contain company code and company related fields in Textbox. Using Ajax to load the company related Fields in onchange Function I edit the company related fields and update it. Its updated Successfully then i Click the back button and refresh the browser. I select the updated company form the dropdown list. It always list the old value insted of updated data. I want to show the updated fields into corresponding textbox. This part of coding is to load the companyname into dropdown list <% DBAccess dbAccess = Util.initDatabaseAccess(); ResultSet rs = null; ResultSet rsEdit = null; int updateSuccess = 0; String button = request.getParameter("saveAction"); rs = dbAccess.executeQuery("select companyname,Companycode,companyid from yosemitecompany where cmpstatus=1 order by companyname"); %> My Ajax function <script> function showCompanyDetails(str) { if (str=="") { document.getElementById("CompanyName").innerHTML=""; return; } if (window.XMLHttpRequest) { xmlhttp=new XMLHttpRequest(); } else { xmlhttp=new ActiveXObject("Microsoft.XMLHTTP"); } xmlhttp.onreadystatechange=function() { if (xmlhttp.readyState==4 && xmlhttp.status==200) { var resValue=new Array(); resValue = xmlhttp.responseText.split("$"); document.getElementById("CompanyName").value=resValue[0]; document.getElementById("StreetName1").value=(resValue[1]!=null && !resValue[1].equalsIgnoreCase("null") && resValue[1].length>0?resValue[1]:""); document.getElementById("StreetName2").value=(resValue[2]!=null && !resValue[2].equalsIgnoreCase("null") && resValue[2].length>0?resValue[2]:""); document.getElementById("City").value=(resValue[3]!=null && !resValue[3].equalsIgnoreCase("null") && resValue[3].length>0?resValue[3]:""); document.getElementById("Zipcode").value=trim((resValue[5]!=null && !resValue[5].equalsIgnoreCase("null") && resValue[5].length>0?resValue[5]:"")); document.getElementById("officePhone").value=(resValue[6]!=null && !resValue[6].equalsIgnoreCase("null") && resValue[6].length>0?resValue[6]:""); document.getElementById("Fax1").value=(resValue[7]!=null && !resValue[7].equalsIgnoreCase("null") && resValue[7].length>0?resValue[7]:""); document.getElementById("email").value=(resValue[8]!=null && !resValue[8].equalsIgnoreCase("null") && resValue[8].length>0?resValue[8]:""); document.getElementById("WebSite").value=(resValue[9]!=null && !resValue[9].equalsIgnoreCase("null") && resValue[9].length>0?resValue[9]:""); document.getElementById("description").value=(resValue[10]!=null && !resValue[10].equalsIgnoreCase("null") && resValue[10].length>0?resValue[10]:""); document.getElementById("companycode").value=resValue[11]; document.getElementById("tempCompanyId").value=resValue[12]; document.getElementById("tempStateId").value=resValue[13]; stateID = resValue[13]; countryID = resValue[14]; processAjaxRequestPost('ajaxRequestPost','SingleListHandler','getCountryListDetails', document.getElementById("tempCompanyId").value); showTimezone(resValue[15]); document.getElementById("userName").value=resValue[16]; document.getElementById("passWord").value=resValue[17]; } } xmlhttp.open("GET","customerDetail.jsp?val="+str,true); xmlhttp.send(); } </script> My Update function <%if(updateSuccess <= 0){ if(button != null && button.equalsIgnoreCase("update")) { String companyCode = request.getParameter("companycode").trim(); String companyName = request.getParameter("CompanyName").trim(); String StreetName1 = request.getParameter("StreetName1").trim(); String StreetName2 = request.getParameter("StreetName2").trim(); String City = request.getParameter("City").trim(); String Zipcode = request.getParameter("Zipcode").trim(); String officePhone = request.getParameter("officePhone").trim(); String Fax1 = request.getParameter("Fax1").trim(); String email = request.getParameter("email").trim(); String WebSite = request.getParameter("WebSite").trim(); String description = request.getParameter("description").trim(); String companyid = request.getParameter("tempCompanyId").trim(); String stateId = request.getParameter("tempStateId").trim(); String timeZone = request.getParameter("timezone").trim(); String uploadCustomerLogo = request.getParameter("uploadCustomerLogo").trim(); String userName = request.getParameter("userName").trim(); String passWord = request.getParameter("passWord").trim(); String smtpInsertFlag = "NO"; String getCompanyId = null; updateSuccess = dbAccess.executeUpdate("update yosemitecompany set companyname='"+com.zoniac.util.Util.deQuoteForSingleQuote(companyName)+"', streetname1='"+com.zoniac.util.Util.deQuoteForSingleQuote(StreetName1)+"', streetname2='"+com.zoniac.util.Util.deQuoteForSingleQuote(StreetName2)+"', cityname='"+com.zoniac.util.Util.deQuoteForSingleQuote(City)+"', zipcode='"+com.zoniac.util.Util.deQuoteForSingleQuote(Zipcode)+"', phonenumber1='"+com.zoniac.util.Util.deQuoteForSingleQuote(officePhone)+"', fax1='"+com.zoniac.util.Util.deQuoteForSingleQuote(Fax1)+"', email1='"+com.zoniac.util.Util.deQuoteForSingleQuote(email)+"', website='"+com.zoniac.util.Util.deQuoteForSingleQuote(WebSite)+"', description='"+com.zoniac.util.Util.deQuoteForSingleQuote(description)+"',timezoneid="+timeZone+", stateid="+stateId+" where companyid='"+companyid+"'"); if(rs != null) { rs = null; dbAccess.close(); } } %> My customerDetail.jsp File <% String val = request.getParameter("val"); DBAccess dbAccess = Util.initDatabaseAccess(); ResultSet rs = null; String outputResult = null; String ff = "NO"; rs = dbAccess.executeQuery("select companyname,streetname1,streetname2,cityname,(select statename from state where stateid = (select stateid from yosemitecompany where companyid ="+val+"))as state,zipcode,phonenumber1,fax1,email1,website,description,companycode,companyid,(select stateid from state where stateid = (select stateid from yosemitecompany where companyid ="+val+"))as statecode,(select countryid from country where countryid =(select countryid from state where stateid = (select stateid from yosemitecompany where companyid ="+val+")))as countryid,timezoneid from yosemitecompany where companyid = "+val+""); if(rs.next()){ outputResult = rs.getString(1)+"$"+rs.getString(2)+"$"+rs.getString(3)+"$"+rs.getString(4)+"$"+rs.getString(5)+"$"+rs.getString(6)+"$"+rs.getString(7)+"$"+rs.getString(8)+"$"+rs.getString(9)+"$"+rs.getString(10)+"$"+rs.getString(11)+"$"+rs.getString(12)+"$"+rs.getString(13)+"$"+rs.getString(14)+"$"+rs.getString(15)+"$"+rs.getString(16); } rs = null; rs = dbAccess.executeQuery("select username,password from EMAILAUTHENTICATIONDETAILS where companyid="+val); if(rs.next()){ ff="YES"; outputResult += "$"+rs.getString(1)+"$"+rs.getString(2); } if(ff.equals("NO")){ outputResult += "$$"; } out.println(outputResult); outputResult = null; ff = "NO"; if(rs!=null) { rs = null; dbAccess.close(); } %>

    Read the article

  • css menu for cross browser...mobile and desktop

    - by user1763319
    I made a cross browser drop down menu, which works well with IE6. However, I have problems with other browsers such as IE9, Firefox, Chrome... etc. How can I modify my HTML and CSS to get the same effect that works in IE6? Link to JSFiddle Here is my CSS: <style> .bar ul,li{ z-index:999; margin:0; padding:0; } .bar { color: #FFFFFF; font-weight: bold; text-align: center; } .bar a { padding: 11px; } .bar a:visited { color: #FFFFFF; font-weight: bold; text-decoration:none } .bar a:link { color: #FFFFFF; font-weight: bold; text-decoration:none } .bar a:hover { color: #FFFFFF; font-weight: bold; text-decoration:underline } #nav0{ list-style:none; font-weight:bold; /* Clear floats */ float:left; width:100%; } #nav0 li{ float:left; margin-right:10px; position:relative; } #nav0 a{ display:block; padding:5px; color:#fff; background:#003399; text-decoration:none; } #nav0 a:hover{ color:#fff; background:#333; text-decoration:underline; } /*--- DROPDOWN ---*/ #nav0 ul{ background:#fff; background:rgba(255,255,255,0); list-style:none; position:absolute; left:-9999px; } #nav0 ul li{ padding-top:1px; float:none; } #nav0 ul a{ white-space:nowrap; } #nav0 li:hover ul{ left:0; } #nav0 li:hover a{ text-decoration:underline; } #nav0 li:hover ul a{ text-decoration:none; } #nav0 li:hover ul li a:hover{ background:#333; } #nav0 li ul li a{ text-align: left; } #nav0 li:hover ul li ul { display:block; background:#003399; float:left; position:relative; padding-left:20px; } #nav0 li ul li:hover ul { display:block; background:#003399; float:left; position:relative; padding-left:20px; } </style> Here is my HTML: <body bgcolor="#79A6A6"> <div id="page" align="center"> <table class="bar" border="0" width="960" cellspacing="0" cellpadding="0" id="table_bar" bgcolor="#003399"> <tr> <td> <ul id="nav0"> <li><a><strong>Home</strong> </a> <ul> <li><a href="#" title>Top Item 1</a><ul> <li><a href="#" title="-">Item 1</a></li> <li><a href="#" title="-">Item 2</a></li> </ul> </li> <li><a href="#" title>Top Item 2</a><ul> <li><a href="@" title>Item 3</a></li> <li><a href="@" title>Item 4</a></li> </ul> </li> </ul> </li> <li><a><strong>Home</strong> </a> <ul> <li><a href="#" title>Top Title</a><ul> <li><a href="#" title="-">title</a></li> <li><a href="#" title="-">title123456789</a></li> </ul> </li> <li><a href="#" title>Top Hello</a><ul> <li><a href="@" title>hello</a></li> <li><a href="@" title>hello123456789</a></li> </ul> </li> </ul> </li> </ul> </li> <ul> </ul> </td> <td width="50" style="text-align: left">&nbsp;</td> </tr> </table> </div> </body> In ie6 Home Top Item 1 Item 1 Item 2 Top Item 2 Item3 Item4 In ie9 Home Top Item 1 Top Item 2 Item 2 Item 3 Item 4

    Read the article

  • Installing Lubuntu 14.04.1 forcepae fails

    - by Rantanplan
    I tried to install Lubuntu 14.04.1 from a CD. First, I chose Try Lubuntu without installing which gave: ERROR: PAE is disabled on this Pentium M (PAE can potentially be enabled with kernel parameter "forcepae" ... Following the description on https://help.ubuntu.com/community/PAE, I used forcepae and tried Try Lubuntu without installing again. That worked fine. dmesg | grep -i pae showed: [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- forcepae [ 0.008118] PAE forced! On the live-CD session, I tried installing Lubuntu double clicking on the install button on the desktop. Here, the CD starts running but then stops running and nothing happens. Next, I rebooted and tried installing Lubuntu directly from the boot menu screen using forcepae again. After a while, I receive the following error message: The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again. Hitting Enter brings me to the desktop. For what errors should I search? And how? Finally, I rebooted once more and tried Check disc for defects with forcepae option; no errors have been found. Now, I am wondering how to find the error or whether it would be better to follow advice c in https://help.ubuntu.com/community/PAE: "Move the hard disk to a computer on which the processor has PAE capability and PAE flag (that is, almost everything else than a Banias). Install the system as usual but don't add restricted drivers. After the install move the disk back." Thanks for some hints! Perhaps some of the following can help: On Lubuntu 12.04: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 bogomips : 1284.76 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: uname -a Linux humboldt 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 i686 i686 i386 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.5 LTS Release: 12.04 Codename: precise cpuid eax in eax ebx ecx edx 00000000 00000002 756e6547 6c65746e 49656e69 00000001 000006d6 00000816 00000180 afe9f9bf 00000002 02b3b001 000000f0 00000000 2c04307d 80000000 80000004 00000000 00000000 00000000 80000001 00000000 00000000 00000000 00000000 80000002 20202020 20202020 65746e49 2952286c 80000003 6e655020 6d756974 20295228 7270204d 80000004 7365636f 20726f73 30352e31 007a4847 Vendor ID: "GenuineIntel"; CPUID level 2 Intel-specific functions: Version 000006d6: Type 0 - Original OEM Family 6 - Pentium Pro Model 13 - Stepping 6 Reserved 0 Brand index: 22 [not in table] Extended brand string: " Intel(R) Pentium(R) M processor 1.50GHz" CLFLUSH instruction cache line size: 8 Feature flags afe9f9bf: FPU Floating Point Unit VME Virtual 8086 Mode Enhancements DE Debugging Extensions PSE Page Size Extensions TSC Time Stamp Counter MSR Model Specific Registers MCE Machine Check Exception CX8 COMPXCHG8B Instruction SEP Fast System Call MTRR Memory Type Range Registers PGE PTE Global Flag MCA Machine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMX MMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSE Streaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop TM Thermal monitor 31 reserved TLB and cache info: b0: unknown TLB/cache descriptor b3: unknown TLB/cache descriptor 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries f0: unknown TLB/cache descriptor 7d: unknown TLB/cache descriptor 30: unknown TLB/cache descriptor 04: Data TLB: 4MB pages, 4-way set assoc, 8 entries 2c: unknown TLB/cache descriptor On Lubuntu 14.04.1 live-CD with forcepae: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1284.68 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management: uname -a Linux lubuntu 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty cpuid CPU 0: vendor_id = "GenuineIntel" version information (1/eax): processor type = primary processor (0) family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6) model = 0xd (13) stepping id = 0x6 (6) extended family = 0x0 (0) extended model = 0x0 (0) (simple synth) = Intel Pentium M (Dothan B1) / Celeron M (Dothan B1), 90nm miscellaneous (1/ebx): process local APIC physical ID = 0x0 (0) cpu count = 0x0 (0) CLFLUSH line size = 0x8 (8) brand index = 0x16 (22) brand id = 0x16 (22): Intel Pentium M, .13um feature information (1/edx): x87 FPU on chip = true virtual-8086 mode enhancement = true debugging extensions = true page size extensions = true time stamp counter = true RDMSR and WRMSR support = true physical address extensions = false machine check exception = true CMPXCHG8B inst. = true APIC on chip = false SYSENTER and SYSEXIT = true memory type range registers = true PTE global bit = true machine check architecture = true conditional move/compare instruction = true page attribute table = true page size extension = false processor serial number = false CLFLUSH instruction = true debug store = true thermal monitor and clock ctrl = true MMX Technology = true FXSAVE/FXRSTOR = true SSE extensions = true SSE2 extensions = true self snoop = true hyper-threading / multi-core supported = false therm. monitor = true IA64 = false pending break event = true feature information (1/ecx): PNI/SSE3: Prescott New Instructions = false PCLMULDQ instruction = false 64-bit debug store = false MONITOR/MWAIT = false CPL-qualified debug store = false VMX: virtual machine extensions = false SMX: safer mode extensions = false Enhanced Intel SpeedStep Technology = true thermal monitor 2 = true SSSE3 extensions = false context ID: adaptive or shared L1 data = false FMA instruction = false CMPXCHG16B instruction = false xTPR disable = false perfmon and debug = false process context identifiers = false direct cache access = false SSE4.1 extensions = false SSE4.2 extensions = false extended xAPIC support = false MOVBE instruction = false POPCNT instruction = false time stamp counter deadline = false AES instruction = false XSAVE/XSTOR states = false OS-enabled XSAVE/XSTOR = false AVX: advanced vector extensions = false F16C half-precision convert instruction = false RDRAND instruction = false hypervisor guest status = false cache and TLB information (2): 0xb0: instruction TLB: 4K, 4-way, 128 entries 0xb3: data TLB: 4K, 4-way, 128 entries 0x02: instruction TLB: 4M pages, 4-way, 2 entries 0xf0: 64 byte prefetching 0x7d: L2 cache: 2M, 8-way, sectored, 64 byte lines 0x30: L1 cache: 32K, 8-way, 64 byte lines 0x04: data TLB: 4M pages, 4-way, 8 entries 0x2c: L1 data cache: 32K, 8-way, 64 byte lines extended feature flags (0x80000001/edx): SYSCALL and SYSRET instructions = false execution disable = false 1-GB large page support = false RDTSCP = false 64-bit extensions technology available = false Intel feature flags (0x80000001/ecx): LAHF/SAHF supported in 64-bit mode = false LZCNT advanced bit manipulation = false 3DNow! PREFETCH/PREFETCHW instructions = false brand = " Intel(R) Pentium(R) M processor 1.50GHz" (multi-processing synth): none (multi-processing method): Intel leaf 1 (synth) = Intel Pentium M (Dothan B1), 90nm

    Read the article

  • NUMA-aware placement of communication variables

    - by Dave
    For classic NUMA-aware programming I'm typically most concerned about simple cold, capacity and compulsory misses and whether we can satisfy the miss by locally connected memory or whether we have to pull the line from its home node over the coherent interconnect -- we'd like to minimize channel contention and conserve interconnect bandwidth. That is, for this style of programming we're quite aware of where memory is homed relative to the threads that will be accessing it. Ideally, a page is collocated on the node with the thread that's expected to most frequently access the page, as simple misses on the page can be satisfied without resorting to transferring the line over the interconnect. The default "first touch" NUMA page placement policy tends to work reasonable well in this regard. When a virtual page is first accessed, the operating system will attempt to provision and map that virtual page to a physical page allocated from the node where the accessing thread is running. It's worth noting that the node-level memory interleaving granularity is usually a multiple of the page size, so we can say that a given page P resides on some node N. That is, the memory underlying a page resides on just one node. But when thinking about accesses to heavily-written communication variables we normally consider what caches the lines underlying such variables might be resident in, and in what states. We want to minimize coherence misses and cache probe activity and interconnect traffic in general. I don't usually give much thought to the location of the home NUMA node underlying such highly shared variables. On a SPARC T5440, for instance, which consists of 4 T2+ processors connected by a central coherence hub, the home node and placement of heavily accessed communication variables has very little impact on performance. The variables are frequently accessed so likely in M-state in some cache, and the location of the home node is of little consequence because a requester can use cache-to-cache transfers to get the line. Or at least that's what I thought. Recently, though, I was exploring a simple shared memory point-to-point communication model where a client writes a request into a request mailbox and then busy-waits on a response variable. It's a simple example of delegation based on message passing. The server polls the request mailbox, and having fetched a new request value, performs some operation and then writes a reply value into the response variable. As noted above, on a T5440 performance is insensitive to the placement of the communication variables -- the request and response mailbox words. But on a Sun/Oracle X4800 I noticed that was not the case and that NUMA placement of the communication variables was actually quite important. For background an X4800 system consists of 8 Intel X7560 Xeons . Each package (socket) has 8 cores with 2 contexts per core, so the system is 8x8x2. Each package is also a NUMA node and has locally attached memory. Every package has 3 point-to-point QPI links for cache coherence, and the system is configured with a twisted ladder "mobius" topology. The cache coherence fabric is glueless -- there's not central arbiter or coherence hub. The maximum distance between any two nodes is just 2 hops over the QPI links. For any given node, 3 other nodes are 1 hop distant and the remaining 4 nodes are 2 hops distant. Using a single request (client) thread and a single response (server) thread, a benchmark harness explored all permutations of NUMA placement for the two threads and the two communication variables, measuring the average round-trip-time and throughput rate between the client and server. In this benchmark the server simply acts as a simple transponder, writing the request value plus 1 back into the reply field, so there's no particular computation phase and we're only measuring communication overheads. In addition to varying the placement of communication variables over pairs of nodes, we also explored variations where both variables were placed on one page (and thus on one node) -- either on the same cache line or different cache lines -- while varying the node where the variables reside along with the placement of the threads. The key observation was that if the client and server threads were on different nodes, then the best placement of variables was to have the request variable (written by the client and read by the server) reside on the same node as the client thread, and to place the response variable (written by the server and read by the client) on the same node as the server. That is, if you have a variable that's to be written by one thread and read by another, it should be homed with the writer thread. For our simple client-server model that means using split request and response communication variables with unidirectional message flow on a given page. This can yield up to twice the throughput of less favorable placement strategies. Our X4800 uses the QPI 1.0 protocol with source-based snooping. Briefly, when node A needs to probe a cache line it fires off snoop requests to all the nodes in the system. Those recipients then forward their response not to the original requester, but to the home node H of the cache line. H waits for and collects the responses, adjudicates and resolves conflicts and ensures memory-model ordering, and then sends a definitive reply back to the original requester A. If some node B needed to transfer the line to A, it will do so by cache-to-cache transfer and let H know about the disposition of the cache line. A needs to wait for the authoritative response from H. So if a thread on node A wants to write a value to be read by a thread on node B, the latency is dependent on the distances between A, B, and H. We observe the best performance when the written-to variable is co-homed with the writer A. That is, we want H and A to be the same node, as the writer doesn't need the home to respond over the QPI link, as the writer and the home reside on the very same node. With architecturally informed placement of communication variables we eliminate at least one QPI hop from the critical path. Newer Intel processors use the QPI 1.1 coherence protocol with home-based snooping. As noted above, under source-snooping a requester broadcasts snoop requests to all nodes. Those nodes send their response to the home node of the location, which provides memory ordering, reconciles conflicts, etc., and then posts a definitive reply to the requester. In home-based snooping the snoop probe goes directly to the home node and are not broadcast. The home node can consult snoop filters -- if present -- and send out requests to retrieve the line if necessary. The 3rd party owner of the line, if any, can respond either to the home or the original requester (or even to both) according to the protocol policies. There are myriad variations that have been implemented, and unfortunately vendor terminology doesn't always agree between vendors or with the academic taxonomy papers. The key is that home-snooping enables the use of a snoop filter to reduce interconnect traffic. And while home-snooping might have a longer critical path (latency) than source-based snooping, it also may require fewer messages and less overall bandwidth. It'll be interesting to reprise these experiments on a platform with home-based snooping. While collecting data I also noticed that there are placement concerns even in the seemingly trivial case when both threads and both variables reside on a single node. Internally, the cores on each X7560 package are connected by an internal ring. (Actually there are multiple contra-rotating rings). And the last-level on-chip cache (LLC) is partitioned in banks or slices, which with each slice being associated with a core on the ring topology. A hardware hash function associates each physical address with a specific home bank. Thus we face distance and topology concerns even for intra-package communications, although the latencies are not nearly the magnitude we see inter-package. I've not seen such communication distance artifacts on the T2+, where the cache banks are connected to the cores via a high-speed crossbar instead of a ring -- communication latencies seem more regular.

    Read the article

  • Silverlight and WCF caching

    - by subodhnpushpak
    There are scenarios where Silverlight client calls WCF (or REST) service for data. Now, if the data is cached on the WCF layer, the calls can take considerable resources at the server if NOT cached. Keeping that in mind along with the fact that cache is an cross-cutting aspect, and therefore it should be as easy as possible to put Cache wherever required. The good thing about the solution is that it caches based on the inputs. The input can be basic type of any complex type. If input changes the data is fetched and then cached for further used. If same input is provided again, data id fetched from the cache. The cache logic itself is implemented as PostSharp aspect, and it is as easy as putting an attribute over service call to switch on cache. Notice how clean the code is:        [OperationContract]       [CacheOnArgs(typeof(int))] // based on actual value of cache        public string DoWork(int value)        {            return string.Format("You entered: {0} @ cached time {1}", value, System.DateTime.Now);        } The cache is implemented as POST Sharp as below 1: public override void OnInvocation(MethodInvocationEventArgs eventArgs) 2: { 3: try 4: { 5: object value = new object(); 6: object[] args = eventArgs.GetArgumentArray(); 7: if (args != null || args.Count() > 0) 8: { 9:   10: string key = string.Format("{0}_{1}", eventArgs.Method.Name, XMLUtility<object>.GetDataContractXml(args[0], null));// Compute the cache key (details omitted). 11:   12: 13: value = GetFromCache(key); 14: if (value == null) 15: { 16: eventArgs.Proceed(); 17: value = XMLUtility<object>.GetDataContractXml(eventArgs.ReturnValue, null); 18: value = eventArgs.ReturnValue; 19: AddToCache(key, value); 20: return; 21: } 22:   23:   24: Log(string.Format("Data returned from Cache {0}",value)); 25: eventArgs.ReturnValue = value; 26: } 27: } 28: catch (Exception ex) 29: { 30: //ApplicationLogger.LogException(ex.Message, Source.UtilityService); 31: } 32: } 33:   34: private object GetFromCache(string inputKey) { if (ServerConfig.CachingEnabled) { return WCFCache.Current[inputKey]; } return null; }private void AddToCache(string inputKey,object outputValue) 35: { 36: if (ServerConfig.CachingEnabled) 37: { 38: if (WCFCache.Current.CachedItemsNumber < ServerConfig.NumberOfCachedItems) 39: { 40: if (ServerConfig.SlidingExpirationTime <= 0 || ServerConfig.SlidingExpirationTime == int.MaxValue) 41: { 42: WCFCache.Current[inputKey] = outputValue; 43: } 44: else 45: { 46: WCFCache.Current.Insert(inputKey, outputValue, new TimeSpan(0, 0, ServerConfig.SlidingExpirationTime), true); 47:   48: // _bw.DoWork += bw_DoWork; 49: //string arg = string.Format("{0}|{1}", inputKey,outputValue); 50: //_bw.RunWorkerAsync(inputKey ); 51: } 52: } 53: } 54: }     The cache class can be extended to support Velocity / memcahe / Nache. the attribute can be used over REST services as well. Hope the above helps. Here is the code base for the same.   Please do provide your inputs / comments.

    Read the article

  • Web Sockets: Browser won't receive the message, complains about it not starting with 0x00 (byte)

    - by giggsey
    Here is my code: import java.net.*; import java.io.*; import java.util.*; import org.jibble.pircbot.*; public class WebSocket { public static int port = 12345; public static ArrayList<WebSocketClient> clients = new ArrayList<WebSocketClient>(); public static ArrayList<Boolean> handshakes = new ArrayList<Boolean>(); public static ArrayList<String> nicknames = new ArrayList<String>(); public static ArrayList<String> channels = new ArrayList<String>(); public static int indexNum; public static void main(String args[]) { try { ServerSocket ss = new ServerSocket(WebSocket.port); WebSocket.console("Created socket on port " + WebSocket.port); while (true) { Socket s = ss.accept(); WebSocket.console("New Client connecting..."); WebSocket.handshakes.add(WebSocket.indexNum,false); WebSocket.nicknames.add(WebSocket.indexNum,""); WebSocket.channels.add(WebSocket.indexNum,""); WebSocketClient p = new WebSocketClient(s,WebSocket.indexNum); Thread t = new Thread( p); WebSocket.clients.add(WebSocket.indexNum,p); indexNum++; t.start(); } } catch (Exception e) { WebSocket.console("ERROR - " + e.toString()); } } public static void console(String msg) { Date date = new Date(); System.out.println("[" + date.toString() + "] " + msg); } } class WebSocketClient implements Runnable { private Socket s; private int iAm; private String socket_res = ""; private String socket_host = ""; private String socket_origin = ""; protected String nick = ""; protected String ircChan = ""; WebSocketClient(Socket socket, int mynum) { s = socket; iAm = mynum; } public void run() { String client = s.getInetAddress().toString(); WebSocket.console("Connection from " + client); IRCclient irc = new IRCclient(iAm); Thread t = new Thread( irc ); try { Scanner in = new Scanner(s.getInputStream()); PrintWriter out = new PrintWriter(s.getOutputStream(),true); while (true) { if (! in.hasNextLine()) continue; String input = in.nextLine().trim(); if (input.isEmpty()) continue; // Lets work out what's wrong with our input if (input.length() > 3 && input.charAt(0) == 65533) { input = input.substring(2); } WebSocket.console("< " + input); // Lets work out if they authenticate... if (WebSocket.handshakes.get(iAm) == false) { checkForHandShake(input); continue; } // Lets check for NICK: if (input.length() > 6 && input.substring(0,6).equals("NICK: ")) { nick = input.substring(6); Random generator = new Random(); int rand = generator.nextInt(); WebSocket.console("I am known as " + nick); WebSocket.nicknames.set(iAm, "bo-" + nick + rand); } if (input.length() > 9 && input.substring(0,9).equals("CHANNEL: ")) { ircChan = "bo-" + input.substring(9); WebSocket.console("We will be joining " + ircChan); WebSocket.channels.set(iAm, ircChan); } if (! ircChan.isEmpty() && ! nick.isEmpty() && irc.started == false) { irc.chan = ircChan; irc.nick = WebSocket.nicknames.get(iAm); t.start(); continue; } else { irc.msg(input); } } } catch (Exception e) { WebSocket.console(e.toString()); e.printStackTrace(); } t.stop(); WebSocket.channels.remove(iAm); WebSocket.clients.remove(iAm); WebSocket.handshakes.remove(iAm); WebSocket.nicknames.remove(iAm); WebSocket.console("Closing connection from " + client); } private void checkForHandShake(String input) { // Check for HTML5 Socket getHeaders(input); if (! socket_res.isEmpty() && ! socket_host.isEmpty() && ! socket_origin.isEmpty()) { send("HTTP/1.1 101 Web Socket Protocol Handshake\r\n" + "Upgrade: WebSocket\r\n" + "Connection: Upgrade\r\n" + "WebSocket-Origin: " + socket_origin + "\r\n" + "WebSocket-Location: ws://" + socket_host + "/\r\n\r\n",false); WebSocket.handshakes.set(iAm,true); } return; } private void getHeaders(String input) { if (input.length() >= 8 && input.substring(0,8).equals("Origin: ")) { socket_origin = input.substring(8); return; } if (input.length() >= 6 && input.substring(0,6).equals("Host: ")) { socket_host = input.substring(6); return; } if (input.length() >= 7 && input.substring(0,7).equals("Cookie:")) { socket_res = "."; } /*input = input.substring(4); socket_res = input.substring(0,input.indexOf(" HTTP")); input = input.substring(input.indexOf("Host:") + 6); socket_host = input.substring(0,input.indexOf("\r\n")); input = input.substring(input.indexOf("Origin:") + 8); socket_origin = input.substring(0,input.indexOf("\r\n"));*/ return; } protected void send(String msg, boolean newline) { byte c0 = 0x00; byte c255 = (byte) 0xff; try { PrintWriter out = new PrintWriter(s.getOutputStream(),true); WebSocket.console("> " + msg); if (newline == true) msg = msg + "\n"; out.print(msg + c255); out.flush(); } catch (Exception e) { WebSocket.console(e.toString()); } } protected void send(String msg) { try { WebSocket.console(">> " + msg); byte[] message = msg.getBytes(); byte[] newmsg = new byte[message.length + 2]; newmsg[0] = (byte)0x00; for (int i = 1; i <= message.length; i++) { newmsg[i] = message[i - 1]; } newmsg[message.length + 1] = (byte)0xff; // This prints correctly..., apparently... System.out.println(Arrays.toString(newmsg)); OutputStream socketOutputStream = s.getOutputStream(); socketOutputStream.write(newmsg); } catch (Exception e) { WebSocket.console(e.toString()); } } protected void send(String msg, boolean one, boolean two) { try { WebSocket.console(">> " + msg); byte[] message = msg.getBytes(); byte[] newmsg = new byte[message.length+1]; for (int i = 0; i < message.length; i++) { newmsg[i] = message[i]; } newmsg[message.length] = (byte)0xff; // This prints correctly..., apparently... System.out.println(Arrays.toString(newmsg)); OutputStream socketOutputStream = s.getOutputStream(); socketOutputStream.write(newmsg); } catch (Exception e) { e.printStackTrace(); } } } class IRCclient implements Runnable { protected String nick; protected String chan; protected int iAm; boolean started = false; IRCUser irc; IRCclient(int me) { iAm = me; irc = new IRCUser(iAm); } public void run() { WebSocket.console("Connecting to IRC..."); started = true; irc.setNick(nick); irc.setVerbose(false); irc.connectToIRC(chan); } void msg(String input) { irc.sendMessage("#" + chan, input); } } class IRCUser extends PircBot { int iAm; IRCUser(int me) { iAm = me; } public void setNick(String nick) { this.setName(nick); } public void connectToIRC(String chan) { try { this.connect("irc.appliedirc.com"); this.joinChannel("#" + chan); } catch (Exception e) { WebSocket.console(e.toString()); } } public void onMessage(String channel, String sender,String login, String hostname, String message) { // Lets send this message to me WebSocket.clients.get(iAm).send(message); } } Whenever I try to send the message to the browser (via Web Sockets), it complains that it doesn't start with 0x00 (which is a byte). Any ideas? Edit 19/02 - Added the entire code. I know it's real messy and not neat, but I want to get it functioning first. Spend last two days trying to fix.

    Read the article

  • Php code works on every browser but not on IE8, help please

    - by DomingoSL
    I think the error has to be in a incompatibility with IE8 and the cookies manipulation, cuz in IE8 you can see the password and login asking screen but when you enter the data and send it the browser seems to do nothing, this is a url you were you can try my code: http://200.8.27.127/tiempo/teacher.php and this is the code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta content="it" http-equiv="Content-Language" /> <meta content="text/html; charset=utf-8" http-equiv="Content-Type" /> <title>Formulario</title> <style type="text/css"> h1 { font: 50px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #111; text-shadow: 0px 2px 3px #555; } h2 { font: 14px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #CCC; text-shadow: 0px 1px 2px #555; } h3 { font: 10px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #CCC; } b1 { font: 16px Tahoma, Helvetica, Arial, Sans-Serif; color: #DDD; } b2 { font: 10px Tahoma, Helvetica, Arial, Sans-Serif; color: #F9F7ED; } .caja { width: 690px; height: 40px; background-color: transparent; border: 0px solid #000000; font-size:x-large; color: #222; font-family: 'Trebuchet MS', 'Lucida Sans Unicode', 'Lucida Grande', 'Lucida Sans', Arial, sans-serif; font-weight: bold;" size="299"; } .style1 { text-align: right; } </style> </head> <body style="background-image: url('IMG/bg.png')"> <script type="text/javascript" src="JS/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="JS/jquery.notifications-1.1.min.js"></script> <link rel="stylesheet" type="text/css" href="JS/jquery.notifications.css" /> <script> function checkCharCount(textfield) { if(textfield.value.length > 300) textfield.value = textfield.value.substr(0, 300); document.getElementById("charCounter").innerHTML = 300 - textfield.value.length; } </script> <?php include("/LIB/HeadSQL.php"); include("/LIB/error.php"); if (isset($_COOKIE['ID_tablon'])) { $username = $_COOKIE['ID_tablon']; $pass = $_COOKIE['Key_tablon']; $check = mysql_query("SELECT * FROM usuarios WHERE nombre = '$username'") or die(mysql_error()); while($info = mysql_fetch_array( $check )) { if ($pass != $info['clave']) { login(); } else { entro($info['email'],$username); } } } else { login(); } function login() { if (isset($_POST['quiere'])) { if(!$_POST['username'] | !$_POST['pass']) { include("LIB/login.php"); error('Debes llenar todos los campos.',0); } else { $check = mysql_query("SELECT * FROM usuarios WHERE nombre = '".$_POST['username']."'") or die(mysql_error()); $check2 = mysql_num_rows($check); if ($check2 == 0) { include("LIB/login.php"); error('Ese usuario no existe.',0); } while($info = mysql_fetch_array( $check )) { $_POST['pass'] = stripslashes($_POST['pass']); $info['clave'] = stripslashes($info['clave']); //$_POST['pass'] = md5($_POST['pass']); if ($_POST['pass'] != $info['clave']) { include("LIB/login.php"); error('La clave es incorrecta.',0); } else { $_POST['username'] = stripslashes($_POST['username']); $hour = time() + 3600; setcookie("ID_tablon", $_POST['username'], $hour); setcookie("Key_tablon", $_POST['pass'], $hour); entro($info['email'],$_POST['username']); } } } } else { include("LIB/login.php"); } exit; } function entro($email,$username) { ?> <div id="todo" align="center" > <div id="cabeza" style="width:850px;height:100px"> </div> <div id="contenido" style="width:850px;height:420px;background-image: url(IMG/cuadro.png)" > <div id="titulo" style="width:765px;height:75px;padding-top: 18px;margin: auto;text-align: left;"> <b1>Bienvenido <b><?php echo($username); ?></b></b1><br> <?php $check = mysql_query("SELECT * FROM sms WHERE ref = '".$username."' ORDER BY fecha DESC LIMIT 0, 1") or die(mysql_error()); while($info = mysql_fetch_array( $check )) { echo("<b1> Tu ultimo mensaje enviado fue: </b1><b2>" . $info['texto'] . " enviado el " . $info['fecha'] . "</b2>"); } ?> </div> <form method="post"> <div id="formulario" style="width:850px;height:255px;margin-top: 10px"> <div id="foto" align="right" style="width:725px; height:40px;padding-top: 11px;margin: auto"> <?php $size = 60; $grav_url = "http://www.gravatar.com/avatar/" . md5( strtolower( $email ) ) . "?size=" . $size; $size = 256; $grav_urlB = "http://www.gravatar.com/avatar/" . md5( strtolower( $email ) ) . "?size=" . $size; echo('<img alt="Image" src="' . $grav_url . '" />'); ?> </div> <div id="texto" style="width:850px;height:29px; margin-top: 38px;margin-left: 4px"> <input name="sms" type="text" onKeyUp="checkCharCount(this)" class="caja" /> </div> <div id="botones" style="width:725px;height:27px; margin-top: 15px" class="style1"> <input name="usuario" type="hidden" value="<?php echo($username); ?>" /> <input name="Submit1" type="image" value="submit" src="IMG/envia.png" /> </div> <div id="resta" style="width:850px;height:29px; margin-top: 53px;margin-left: 4px"> <h2><span id="charCounter">300</span> caracteres restantes.</h2> <h3><a href=logout.php>Cerrar Sesion</a></h3> </div> </div> </form> </div> </div> </body> </html> <?php session_start(); if (isset($_POST['Submit1'])) { if (isset($_SESSION['token']) && (time() - $_SESSION['token']) < 5) { error('Debes esperar 5 segundos para poder enviar otra informacion.',0); } else { $_SESSION['token'] = time(); include("/LIB/HeadSQL.php"); include("/LIB/comprueba.php"); $insert = "INSERT INTO sms (ref, texto, fecha) VALUES ('" . addslashes($_POST['usuario']) . "', '" . addslashes($_POST['sms']) . "', NOW() )"; $add_member = mysql_query($insert); error("Tu mensage ha sido enviado con exito.",1); } } exit; } ?> do you think the isuue can be on the javascript? try the code firts with Firefox or google chrome, then try in IE8.

    Read the article

  • Is it possible to make CSS-added text searchable by a browser?

    - by Andrew Stacey
    I run a website that uses CSS pseudo classes to insert text here and there. One of them inserts the value of a CSS counter (whereupon it would require considerable re-engineering of the system to do this without CSS text injection). The specific CSS rule is: .num_defn .theorem_label:after { content: " " counter(definition, decimal); counter-increment: definition; } and this converts "Definition" to "Definition 1" (say). However, the injected text is not searchable by the browser. It doesn't see the 1: if I search for "Definition 1" then it doesn't find it, and if I search for "Definition. Whatever the definition text was" then the browser happily highlights the line except for the inserted 1. So if you imagine the bold text as the highlighting, it would look like: Definition 1 . Whatever the definition text was This is not ideal! People like to refer to definitions by their number and to say "Look at Definition 1 on the page XYZ" (and in contexts where hyperlinks are not available - strange, I know, but it does happen). Thus: Is there any way that I, on the server end, can designate the injected text as "searchable"? If not, is there a simple way at the browser end that this can be enabled?

    Read the article

  • UITableView UITableViewCell not reloading on reloadData

    - by David van Dugteren
    This question has been asked a few times now, but there exists no answer on the web that has solved the problem for me yet... See the code: { const NSInteger TOP_LABEL_TAG = 1001; static NSString *CellIdentifier = @"CellIdentifier"; UITableViewCell *cell = [theTableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; } getAQuestionToAnswer = [[QuestionsToAnswer sharedInstance] getLatestLoadedQuestion]; UILabel *topLabel; topLabel = [[[UILabel alloc] initWithFrame: CGRectMake ( 50, 18, 260, 75)] autorelease]; [cell.contentView addSubview:topLabel]; topLabel.tag = TOP_LABEL_TAG; topLabel.backgroundColor = [UIColor clearColor]; topLabel.textColor = [UIColor colorWithRed:0.25 green:0.0 blue:0.0 alpha:1.0]; topLabel.highlightedTextColor = [UIColor colorWithRed:1.0 green:1.0 blue:0.9 alpha:1.0]; [topLabel setFont:[UIFont fontWithName:@"MarkerFelt-Thin" size:13]]; topLabel.numberOfLines = 4; topLabel = (UILabel *)[cell viewWithTag:TOP_LABEL_TAG]; topLabel.text = [NSString stringWithFormat:@"%@", [getAQuestionToAnswer valueForKey:@"question"] ]; Some code is omitted but the basics is there, I'm updating by means of a shake gesture, the NSLog confirms that the getAQuestionToAnswer is indeed updated with a new question after the gesture. Yet at run time, no matter what I do... e.g. [self.tableview reloaddata]; nothing works. It just doesn't want to refresh.

    Read the article

  • fresh_when in ruby not working with xml rendering

    - by Guilherme Silveira
    While trying to implement support for conditional GETting in a rest system, we have come across the fresh_when and stale? methods. The following code works fine with 304 and not further rendering: if stale?(:etag = resource, :last_modified = resource.updated_at.utc) respond_to do |format| format.html # show.html.erb } end end But accessing 1.xml will try to render the resource twice: if stale?(:etag => resource, :last_modified => resource.updated_at.utc) respond_to do |format| format.html # show.html.erb format.xml { render :xml => @order.to_xml(:controller => self, :except => [:paid_at]) } end end The error message: ActionController::DoubleRenderError in OrdersController#show Can only render or redirect once per action RAILS_ROOT: /Users/guilherme/Documents/ruby/restfulie-test Application Trace | Framework Trace | Full Trace /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/base.rb:900:in render_without_benchmark' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/benchmarking.rb:51:in render' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/core_ext/benchmark.rb:17:in ms' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/core_ext/benchmark.rb:10:in realtime' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/core_ext/benchmark.rb:17:in ms' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/benchmarking.rb:51:in render' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/base.rb:1331:in send' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/base.rb:1331:in perform_action_without_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/filters.rb:617:in call_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/filters.rb:610:in perform_action_without_benchmark' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/benchmarking.rb:68:in perform_action_without_rescue' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/core_ext/benchmark.rb:17:in ms' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/core_ext/benchmark.rb:10:in realtime' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/core_ext/benchmark.rb:17:in ms' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/benchmarking.rb:68:in perform_action_without_rescue' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/rescue.rb:160:in perform_action_without_flash' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/flash.rb:146:in perform_action' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/base.rb:532:in send' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/base.rb:532:in process_without_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/filters.rb:606:in process' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/base.rb:391:in process' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/base.rb:386:in call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.4/lib/action_controller/routing/route_set.rb:437:in `call' Any suggestions? Regards

    Read the article

  • Using EHCache with ASP.NET?

    - by frankadelic
    I have heard of .NET APIs for memcached. Is there any equivalent for EHCache? I am envisioning a cluster of linux machines running EHCache, serving cached objects for a farm of ASP.NET webservers. Is this practical? Can this be done without installing Java on the ASP.NET servers?

    Read the article

  • Mustache.js render technique

    - by PanosJee
    Hello everyone, i am trying to use mustache.js to render some JSON in the browser. What i want to do is: <li> <span class="label">Location: </span> {{#locations}} {{.}}<span class="social-small-size "></span> {{/locations}} </li> The locations is a js array [["Pendéli, Attiki, Greece", "facebook"], ["Greece", "linkedin"]] Initially i tried to use {{%IMPLICIT-ITERATOR iterator=loc}} in my attempt to split the data in the view. So i the actual rendering code was {{loc[0]}}<span class="social-small-size {{loc[1}}"></span> But that did n t work altough the loop worked and i got 2 spans but without any content. I think the PRAGMA is what I need but I didn 't figure it out. Any hints ? :)

    Read the article

  • microphone volume control from javascript

    - by paleozogt
    I'd like to be able to control the system microphone volume from the browser. I know that the microphone can be recorded from using Flash or Silverlight, but these don't allow control of the microphone volume. (Flash has Microphone.gain, but as its just a software multiplier, it doesn't help when the system mic volume is muted or too loud.) I've heard that HTML5 will have some sort of microphone access, but whether it will allow volume control is unclear to me. At any rate, I don't think any browsers support it yet. Are there any plugins that would allow volume control? The old Google Gears project has some AudioApi docs, though these don't seem to have made it into the actual plugin. There's also the Google Talk plugin- it seems to do some kind of gain control, but its unclear if there's an api to the plugin. Perhaps there's a draft HTML5 implementation plugin for microphone access (like indexeddb, for example)?

    Read the article

  • JavaScript to detect if the parent frame is of the same origin?

    - by tlrobinson
    I'm looking for a cross-browser way to detect whether the parent frame is the same origin as my frame, preferably without printing warnings on the JavaScript error console. The following seems to work but I'd like to avoid printing errors to the console (at least Safari and Chrome do when accessing location.href on the parent frame. Firefox throws an exception which can be caught): function parentIsSameOrigin() { var result = true; try { result = window.parent.location.href !== undefined; } catch (e) { result = false; } return result; }

    Read the article

  • C#: Cached Property: Easier way?

    - by Peterdk
    I have a object with properties that are expensive to compute, so they are only calculated on first access and then cached. private List<Note> notes; public List<Note> Notes { get { if (this.notes == null) { this.notes = CalcNotes(); } return this.notes; } } I wonder, is there a better way to do this? Is it somehow possible to create a Cached Property or something like that in C#?

    Read the article

  • Determining URLs updated via a series of commit logs

    - by adamrubin
    I'm working on a project where I programmatically need to know when a URL has been changed by a developer, post or during deploy. The obvious answer may be to curl the URL one day, save the output, then curl and in x days then do a diff. That won't work in my case, as I'm only looking for changes the developer mande. If the site is a blog, new comments, user submitted photos, etc would make that curl diff useless. RoR example, using github. Let's assume I have access to the entire repository and all commit logs between iterations. Is there a way I could see that "/views/people/show.html.erb" was commited, then backtrack from there (maybe by inspecting routes.rb), to come up with the URL I can then hit via a browser?

    Read the article

  • Hot to trigger saved password autofill in browsers?

    - by Aleksander Kmetec
    I have a web application written in pure JavaScript (no pre-generated HTML except for the document which loads all the JS files). This app contains a login form which is created dynamically when the document.ready event event is triggered. I trick the browser into displaying the "Remember password?" dialog by posting the login form into a hidden iframe before logging in using ajax (in Firefox the password appears on the saved password list, so this part obviously works) but saved passwords never get filled in after the login screen is loaded again at a later time. The same thing happens in Firefox and Safari. Is there something I can do or some function I can call to trigger autofill?

    Read the article

  • Cross domain cookie reading/setting cross browsers

    - by Rac123
    I know there are already a few threads available here on this subject but I want others' opinion on this. There are two ways to set/read the cross domain cookies: Creating IFrame on A.com pointing to a page on B.com which creates the cookie and pass that information by creating another IFrame on B.com side pointing to A.com, either using window.name or in location.href.hash A.com page makes a XHR/JSONP call to B.com web service/page that has the following headers and it also sets up the cookie and returns the value. AddHeader("p3p", "CP=\"IDC DSP COR ADM DEVi TAIi PSA PSD IVAi IVDi CONi HIS OUR IND CNT\"") As we don't have postMessage available across all the browsers, I believe we have to go with one of the cases mentioned above. My question is which is a better way (cleaner) and why to implement for cross browser. Using any other JS framework is out of scope of this discussion. If there's another better way, please mention here! Thank you for your intelligent input in advance! :)

    Read the article

  • counter_cache rails a child creation should increment the count intwo different models based on cond

    - by aditi-syal
    Hi, I have 3 models Recommendation Job Qualification Recommendation model has two fields as work_type and work_id(foreign key for job/qualification based on work_type as "J"/"Q") I am facing problem in using counter_cache I have done this in recommendation.rb belongs_to :job , :counter_cache = true, :foreign_key = "work_id" belongs_to :qualification , :counter_cache = true, :foreign_key = "work_id" and in job and qualification model files has_many :recommendations , :conditions = {:work_type = "J"} has_many :recommendations , :conditions = {:work_type = "Q"} Both Job and Qualification Models have a column as recommendations_count The problem is every time an object of recommendation is created count is increased in the both the models Please help me with this Thanks

    Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >