Search Results

Search found 6103 results on 245 pages for 'logical tree'.

Page 128/245 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• Why does HDTune report better performing drives 2 months after installing them?

  - by Rolnik

  OK, so this is really weird. I ran HDTune on a newly set-up home-built computer and got the following readings from my drives in mid-November. SSD 154 MB/s RAID1 87 RAID0 198 (software installs) RAID0 98 Swap drive Today, in January, I run HDTune (same version) and get these results, in MB/s: SSD 186 RAID1 98 RAID0 241 RAID0 98 (Swap drive) Here are more details that HDTune reports on the SSD drive: HD Tune: OCZ-VERTEX Benchmark Blockquote Transfer Rate Minimum : 135.4 MB/sec Transfer Rate Maximum : 219.4 MB/sec Transfer Rate Average : 185.7 MB/sec Access Time : 0.1 ms Burst Rate : 187.3 MB/sec CPU Usage : -1.0% To get to my question: Why are my hard drives improving in performance? Most of my logical drives are in some form of RAID, except for the SSD. Will this performance ever deteriorate? Note, none of my drives are a hybrid drive that uses some form of SSD to enhance the write/reads on actual platters.

  Read the article

• What SATA drive should I install FreeBSD onto? i.e. ar0 vs da0 vs ad4/5

  - by Matt

  I'm installing FreeBSD 8.0 on a server that has hardware SATA Raid. I'm just wondering. What is the difference between these devices. i.e. ar0, da0, ad4, ad5 I take it that ad4 & 5 are my two disks. Somehow the OS can see them individually even though it's one logical mirrored drive. Should I be installing it onto ar0 or one of the adX disks. What is da0? it's smaller than the others. ar0 is not some kind of software raid device is it? Just want to make sure I don't mess this up right from the get go.

  Read the article

• My computer won't go into standby or hibernate

  - by Thomas B.

  Hi. I have a problem that I first noticed yesterday. Whenever I would press the half moon standby button on my keyboard, my computer would go to sleep. I also have a shortcut on my desktop configured to put my computer into hibernate. But now whenever I try to put my pc in sleep or hibernate mode, my monitor goes black for a few seconds but then comes back on at the login screen. I haven't installed or changed anything other than create a couple logical partitions in the hfs+ filesystem. (still in the process of trying to triple-boot) Any help would be great, but for now I'm going to bed. Will check back in the morning.

  Read the article

• How do you expand a raid disk array in a dell 2850?

  - by johnny

  Hi, I have a Dell 2850 and I want to install Windows 2008 Server. Problem is that my C drive only has 16GB of space. The requirements say I need at least 20. I have an open bay for a drive. If I put in another drive, how can I add that to the array and them make it only for the C drive? what do I do? Thank you. edit: I don't want to remove any drives. I just want to add a new one to the existing array. Can I do that and make sure that new drive is for the logical C drive?

  Read the article

• How can I mount an image from an external HDD to a partition within the host system?

  - by HardwareMuch

  I'm currently using Acronis True Image Home 2010 and I have created an image of my Windows 7 OS. I copied it to my external HDD and I repartitioned my other PC's HDD. The primary partition houses the Windows Xp system which also has Acronis installed. The new partition is logical. Whenever I try to go through the steps on "Clone Disk" the program would not let me select a destination drive if I choose the external HDD as the source. I also did not know that it you can only select disks instead of partitions as a source or destination. Any suggestions would be greatly appreciated. Thanks.

  Read the article

• How to benchmark kernel (-Os vs -O2)

  - by NightwishFan

  It seems logical to me that on a 64-bit kernel compiling it to optimize for size might help overall. (My distro of choice uses -O2) It has the benefits of more registers and memory and perhaps less cache contention than normal optimized code. I have a kernel compiled like this and it seems excellent. However my question is how can I prove this? I like using Phoronix for "real world" sort of benchmarks so I would prefer to test cases like that. What should I pick to test? Does anyone else have any alternatives? Thank you very much in advance.

  Read the article

• How can I know if a VM is used or not?

  - by Saariko

  I am running eSXI 4.1. In my main datastore I have plenty of folders, some of them has logical names, while the others don't, they hold BASE configurations/images of clients that I duplicate and activate. I only have a fraction of the actual clients loaded and running on the server. How can I know, but looking in the datastore folder, if the VM is in the inventory or not? If I right click on the vmx file, I can add it to the inventory - EVEN if the same client/folder is already active.

  Read the article

• Is email forwarding to the sender's address usually blocked in Mail servers / MTA?

  - by codecowboy

  I've noticed that email forwarding to an address seems not to work if I send an email from the address to which I am forwarding email. This happens for GMail and Fasthosts mail servers. e.g I send an email to [email protected] from [email protected] , [email protected] is set to forward to [email protected] and the email never arrives. I realise this seems logical but it is a potential cause of confusion when testing email functionality in a web application (for me, anyway ;-). I would just like to know if this is standard for all MTA software so I can avoid confusing myself.

  Read the article

• Volume expanded in Volume Group, old disk reduced but still in use in system

  - by Yurij73

  Tryed to add a new hard sdb (not formated) to my virtualbox Centos. Successfully extended an existing vg_localhost to /dev/sdb/ # lvdisplay --- Logical volume --- LV Path /dev/vg_localhost/lv_root LV Name lv_root VG Name vg_localhost LV UUID DkYX7D-DMud-vLaI-tfnz-xIJJ-VzHz-bRp3tO LV Write Access read/write LV Creation host, time localhost.centos, 2012-12-17 LV Status available # open 1 LV Size 18,03 GiB Current LE 4615 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 20G 0 disk +-vg_localhost-lv_root (dm-0) 253:0 0 18G 0 lvm / +-vg_localhost-lv_swap (dm-1) 253:1 0 2G 0 lvm [SWAP] sda 8:0 0 9G 0 disk +-sda1 8:1 0 500M 0 part /boot +-sda2 8:2 0 8,5G 0 part sr0 11:0 1 1024M 0 rom df -h /dev/mapper/vg_localhost-lv_root 6,5G 6,2G 256M 97% / tmpfs 499M 200K 499M 1% /dev/shm /dev/sda1 485M 78M 382M 17% /boot it still old sda in use, what i have to do further?

  Read the article

• ext4 loopback device, Buffer I/O Error on reboot

  - by cvb

  I am trying to mount a loopback device on my ext4 formatted ssd drive. I get these errors when I reboot on Linux kernel 2.6.38.8 Buffer I/O error on device loop1, logical block 0 Here is what I do: dd if=/dev/zero of=/mnt/s/lodev bs=4096 count=250000 mkfs.ext4 /mnt/s/lodev mount -n -o loop,rw /mnt/s/lodev /mnt/test The loopback mount is successful, but on reboot I get errors as mentioned above. Even mouting with 'sync','data=writeback' does not help. I tried to losetup a device, but see the same behavior. I also reformatted the base device and created the loopback device and mounted as above, I still see these errors. I do not see them when I format them as vfat. Appreciate any suggestions on this problem.

  Read the article

• How to install Windows 8 boot manager in a different partition?

  - by arnab321

  the last time i installed Windows 7, the boot manager automatically got installed in a small hidden partition, and the main os into another partition. So, formatting the c: won't affect the boot manager. yesterday i wiped and repartitioned my hdd like this: 50mb primary ntfs (meant for boot manager) 100gb primary ntfs (for win 8) 50gb primary ntfs (for win 7) some logical partitions to install ubuntu and other os i installed win 7 and then win 8, and now there is no os choosing menu. system directly boots win 8 and the 50 mb partition is empty. There is a way to boot Windows 7 and even Ubuntu directly from the Windows boot manager with EasyBCD. But How do i put the boot manager in the 50mb partition ?

  Read the article

• Move /var directories to to /mnt on an EC2 instance

  - by Geoff Lanotte

  I am trying to work on a standard configuration for a set of EC2 instances running ubuntu 12.04. These servers are going to be primarily web servers for a Ruby on Rails application. When you configure a new large instance, you are given a primary of 8GB and then ephemeral storage of 400 GB that is mounted to /mnt. It seems logical to me to move some directories that have a potential for growth off to the /mnt directory, I was specifically thinking of /var/www and /var/log. My question is two-fold: Is this a good idea or are there pitfalls that I cannot see? If this is a good idea, how should I go about configuring this. I do have the ability to configure new instances and down our old instances. My concern is over long term, doing this in such a way that it prevents downtime. I am a developer with some experience in devops, but mounting drives is something I have not faced before, so explicit directions would be greatly appreciated.

  Read the article

• How to setup IP alias on bridged interface in Ubuntu

  - by Anonymouslemming

  How do I setup an IP alias on a bridge (br0) device on Ubuntu ? If I wait for br0 to come up and then do /sbin/ifconfig br0:0 192.168.10.1 netmask 255.255.255.0 then it works fine. If however I add the following to my /etc/network/interfaces file, it does not work and the network fails to start: auto br0:0 iface br0:0 inet static address 192.168.10.1 netmask 255.255.255.0 At the moment, I have a script in /etc/network/if-up.d/bridge_alias that does this as follows: #!/bin/bash if [ "${LOGICAL}" == "br0" ] && [ "${PHASE}" = "post-up" ]; then echo -n "Starting br0:0 ... " /sbin/ifconfig br0:0 192.168.10.2 netmask 255.255.255.0 echo "Done!" fi What is the right way of doing this though, just using the OS network config files ?

  Read the article

• Turn off write barriers on ext4 whiche FS is mounted

  - by user462982

  I am doing some IO intensive DB imports that run for several days now and the IO performance has dropped tremendously over times. The DB data files (log files) are on an ext4 formatted logical volume which is mounted with default options (did not specify something special in fstab). Since I just learned that ext4 enables write barriers by default: Q: Is there some way to disable write barriers online (i.e. while the file system is in use), because I cannot interrupt the import and don't want to restart it again. I am aware that write barriers might not be the only thing impeding performance it is a bad idea to have write barriers disabled on journalling file systems if data safty is important (e.g. on a production system)

  Read the article

• Force RAID to read exiled disk?

  - by user198847

  user user197015 asked on 1th of November the following question: "We have a RAID 6 array (Infortrend EonStor DS S16F) that recently had two disks fail. Immediately prior to replacing these two disks, a third, good, disk was accidentally ejected from the array. After reinserting this disk it is marked as "exiled" by the array's firmware, and so even after replacing the two failed disks with new ones the array refuses to rebuild the logical volume and remains inaccessible. Since the temporarily-ejected disk is still functional and nothing has been written to the array since it was ejected, it seems that it should theoretically be possible to recover all the data on the array, but how can we convince the array to use the data from the "exiled" disk? Thanks for any help or advice you can offer." Now I've got quite the same problem. The post has been deleted by the user, so I don#t know if he was successful. Is there anybody who can help me? Thank you!

  Read the article

• How does one enable --write-mostly with Linux RAID?

  - by user76871

  Unfortunately the mdadm and mdadm.conf man pages are not quite up to par. I would like to enable the --write-mostly flag for my RAID, but neither the man pages nor the internet will tell me how. I am not aware of any place to put default arguments for mdadm, nor aware of when it would be launched and by what. It seems the logical place to add this information is mdadm.conf, but the flag is unmentioned in man mdadm.conf. Where and how can I enable --write-mostly? Thank you.

  Read the article

• How to extend a partition in Windows 2000 Server

  - by user999684

  I have a Windows 2000 Server set up with RAID 5. I initially defined 2 136 GB logical disks 0 and 1. I have a small utility partition on disk 0 along with the C drive. I wish to extend the C drive to use disk 1 as well, which is now configured to drive D. I deleted drive D, but it is still in disk 1. I download partdisk.exe from MS, but am not sure how to accomplish what I want to do. I know I need to use extend, but I think I need to remove disk 1 and somehow add the unallocated space to disk zero, but am not at all confident on how to do it.

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• Ultimate way to use Picasa in a home network

  - by luisfarzati

  I've been trying a lot of approaches but still didn't find any effective solution. I want gigs of photos in a network drive (a IOMega Home Media Network Drive, plugged to my wifi router). I'd like to do 2 things: Do a Picasa import process of all the photos in the drive, making Picasa organize all the files in a year/month folder structure physically. Ideally, the import target directory should be the same network drive, otherwise I should move all the imported files in my local computer back to the drive myself. Share the Picasa database over the network, by uploading it to the network drive. Have me and other members of the family point our Picasas to the network database, and see the photos as well as make changes (tag faces, create logical albums, etc) into it. Is ANY possibility to accomplish this? Or should I be looking for another photo management app, and in that case do you know such one? Thank you!

  Read the article

• Dell Precision 670 no booting

  - by fristson

  Our dell running xp did not boot one day and was making a beep code I had a hard time finding on the internet. It was one of the RAM sticks so i replaced it. Before that i removed the motherboard battery to see if there was a problem with the battery. Now at start up it tells me that No Logical Drives Found and then BIOS not installed!. I have read over alot of post here and other places but everyone is talking about installation of the OS. I just want it to start with what it had. Please help.

  Read the article

• Poor disk performance with high disk capacity usage

  - by GoldenNewby

  I've heard numerous times in the web hosting industry that using "too much" disk space on a drive is bad for performance. Is this just a myth? Can someone explain why this is an issue, even in a situation where the amount of IO done to the drive would be the same at 10% as it would be at 90%? I'm especially curious in the case of virtual servers. If I set up 10 Logical volumes as the virtual disks for some VMs, is it going to run better if I "waste" 20% of the disk space?

  Read the article

• "net use /delete" question

  - by tinmaru

  I want to delete a network connection. When I type net use I get this: Microsoft Windows XP [version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\totonet use État Local Distant Réseau OK M: \192.168.5.138\share Réseau Microsoft Windows OK R: \192.168.2.18\tools Réseau Microsoft Windows OK \192.168.2.43\data Réseau Microsoft Windows La commande s'est terminée correctement. The syntax for deleting a network map is : net use /delete X: if I want to delete a specific connection net use /delete * * if I want to delete all connections. How can I delete the \192.168.2.43\data connection which, as you can see, is not link to any logical letter?

  Read the article

• Turning a running Linux system into a KVM instance on another machine

  - by Charles

  I have two physical machines that I wish to virtualize. I can not (physically) plug the hard drives from either machine into the new machine that will act as their VM host, so I think that copying the entire structure of the system over using dd is out of the question. How can I best go about migrating these machines from their hardware to the KVM environment? I've set up empty, unformatted LVM logical volumes to host their filesystems, with the understanding that giving the VMs a real partition to work with achieves higher performance than sticking an image on the filesystem. Would I be better off creating new OS installs and rsyncing the differences over? FWIW, the two machines to be VM'd are running CentOS 5, and the host machine is running Ubuntu Server 10.04 for no particularly important reason. I doubt this matters too much, as it's still going to be KVM and libvert that matter.

  Read the article

• Best way to partition 1 TB (Linux and Windows 7)

  - by Simon

  Is there an intelligent way to partition 1 TB and be prepared for resizing/adding/deleting partitions? I was thinking about LVM, but as far as I remember, Windows 7 can't be installed on logical volume right? For now my plan is: - ~150 GB for Windows 7 and other stuff (Visual Studio..., maybe I'll split it 100/50 or something like that) - simple NTFS - 850 GB = LVM - disk for Linux (Ubuntu) and other stuff virtual machines, etc. I'm mostly interested in how and what tools should I use to get easy in maintain partitions for both systems.

  Read the article

• Accessing a broken mdadm raid

  - by CarstenCarsten

  Hi! I used a western digital mybookworld (SOHO NAS storage using Linux) as backup for my Linux box. Suddenly, the mybookworld does not boot up any more. So I opened the box, removed the hard disk and put the hard disk into an external USB HDD case, and connected it to my Linux box. [ 530.640301] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 530.797630] scsi7 : usb-storage 2-1:1.0 [ 531.794844] scsi 7:0:0:0: Direct-Access WDC WD75 00AAKS-00RBA0 PQ: 0 ANSI: 2 [ 531.796490] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 531.797966] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 531.800317] sd 7:0:0:0: [sdc] Write Protect is off [ 531.800327] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 531.800333] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803836] sdc: sdc1 sdc2 sdc3 sdc4 [ 531.815831] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.815842] sd 7:0:0:0: [sdc] Attached SCSI disk The dmesg output looks normal, but I was wondering why the hardisk was not mounted at all. And why there are 4 different partitions on it. fdisk showed the following: root@ubuntu:/home/ubuntu# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdc: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007c00 Device Boot Start End Blocks Id System /dev/sdc1 4 369 2939895 fd Linux raid autodetect /dev/sdc2 370 382 104422+ fd Linux raid autodetect /dev/sdc3 383 505 987997+ fd Linux raid autodetect /dev/sdc4 506 91201 728515620 fd Linux raid autodetect Oh no! Everything seems to be created as a mdadm software raid. Calling mdadm --examine with the different partitions seems to affirm that. I think the only partition I am interested in, is /dev/sdc4 (because it is the largest). But nevertheless I called mdadm --examine with every partition. root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 00.90.00 UUID : 5626a2d8:070ad992:ef1c8d24:cd8e13e4 Creation Time : Wed Feb 20 00:57:49 2002 Raid Level : raid1 Used Dev Size : 2939776 (2.80 GiB 3.01 GB) Array Size : 2939776 (2.80 GiB 3.01 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 1 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 4c90bc55 - correct Events : 16682 Number Major Minor RaidDevice State this 0 8 1 0 active sync /dev/sda1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 00.90.00 UUID : 9734b3ee:2d5af206:05fe3413:585f7f26 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 104320 (101.89 MiB 106.82 MB) Array Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 2 Update Time : Wed Oct 27 20:19:08 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 55560b40 - correct Events : 9884 Number Major Minor RaidDevice State this 0 8 2 0 active sync /dev/sda2 0 0 8 2 0 active sync /dev/sda2 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc3 /dev/sdc3: Magic : a92b4efc Version : 00.90.00 UUID : 08f30b4f:91cca15d:2332bfef:48e67824 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Array Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 3 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 39717874 - correct Events : 73678 Number Major Minor RaidDevice State this 0 8 3 0 active sync 0 0 8 3 0 active sync 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc4 /dev/sdc4: Magic : a92b4efc Version : 00.90.00 UUID : febb75ca:e9d1ce18:f14cc006:f759419a Creation Time : Wed Feb 20 00:57:55 2002 Raid Level : raid1 Used Dev Size : 728515520 (694.77 GiB 746.00 GB) Array Size : 728515520 (694.77 GiB 746.00 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 4 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 2f36a392 - correct Events : 519320 Number Major Minor RaidDevice State this 0 8 4 0 active sync 0 0 8 4 0 active sync 1 1 0 0 1 faulty removed If I read the output correctly everything was removed, because it was faulty. Is there ANY way to see the contents of the largest partition? Or seeing somehow which files are broken? I see that everything is raid1 which is only mirroring, so this should be a normal partition. I am anxious to do anything with mdadm, in fear that I destroy the data on the hard disk. I would be very thankful for any help.

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >