Search Results

Search found 9750 results on 390 pages for 'sys debug'.

Page 128/390 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• Very poor read performance compared to write performance on md(raid1) / crypt(luks) / lvm

  - by Android5360

  I'm experiencing very poor read performance over raid1/crypt/lvm. In the same time, write speeds are about 2x+ faster on the same setup. On another raid1 setup on the same machine I get normal read speeds (maybe because I'm not using cryptsetup). OS related disks: sda + sdb. I have raid1 configuration with two disks, both are in place. I'm using LVM over the RAID. No encryption. Both disks are WD Green, 5400 rpm. IO test results on this raid1: dd if=/dev/zero of=/tmp/output.img3 bs=8k count=256k conv=fsync - 2147483648 bytes (2.1 GB) copied, 22.3392 s, 96.1 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=/tmp/output.img3 of=/dev/null bs=8k - 2147483648 bytes (2.1 GB) copied, 15.9 s, 135 MB/s And here is the problematic setup (on the same machine). Currently I have only one sdc (WD Green, 5400rpm) configured in software raid1 + crypt (luks, serpent-xts-plain) + lvm. Tomorrow I will attach another disk (sdd) to complete this two-disk raid1 setup. IO tests results on this raid1: dd if=/dev/zero of=output.img3 bs=8k count=256k conv=fsync 2147483648 bytes (2.1 GB) copied, 17.7235 s, 121 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=output.img3 of=/dev/null bs=8k 2147483648 bytes (2.1 GB) copied, 36.2454 s, 59.2 MB/s We can see that the read performance is very very bad (59MB/s compared to 135MB/s when using no encryption). Nothing is using the disks during benchmark. I can confirm this because I checked with iostat and dstat. Details on the hardware: disks: all are WD green, 5400rpm, 64mb cache. cpu: FX-8350 at stock speed ram: 4x4GB at 1066Mhz. Details on the software: OS: Debian Wheezy 7, amd64 mdadm: v3.2.5 - 18th May 2012 LVM version: 2.02.95(2) (2012-03-06) LVM Library version: 1.02.74 (2012-03-06) LVM Driver version: 4.22.0 cryptsetup: 1.4.3 Here is how I configured the slow raid1+crypt+lvm setup: parted /dev/sdc mklabel gpt type: ext4 start: 2048s end: -1 Now the raid, crypt and the lvm configuration: mdadm --create /dev/md1 --level=1 --raid-disks=2 missing /dev/sdc cryptsetup --cipher serpent-xts-plain luksFormat /dev/md1 cryptsetup luksOpen /dev/md1 md1_crypt vgcreate vg_sql /dev/mapper/md1_crypt lvcreate -l 100%VG vg_sql -n lv_sql mkfs.ext4 /dev/mapper/vg_sql-lv-sql mount /dev/mapper/vg_sql-lv_sql /sql So guys, can you help me identify the reason and fix it? It has to be something with the cryptsetup as there is no such read slowdown on the other setup (sda+sdb) where no encryption is present. But I have no idea what to do. Thanks!

  Read the article

• How use applicationSettings in the new web.config configuration in VS2010?

  - by citronas

  I'm used to use web deployment projects. Currently I am developing a new web application with VS2010 and want to try to get along with the new web.config principle and deployment issues. How can I replace a simple setting like <applicationSettings> <NAMESPACE> <setting name="Testenvironment" serializeAs="String"> <value>True</value> </setting> </NAMESPACE> </applicationSettings> I want to have this setting to be set to True in Debug, and false in Release. How must the entries in the Web.Debug.config and Web.Release.Config look like? And by the way: Is there some documentation about the new web.config issue? Can't seem to google for the correct keywords.

  Read the article

• CPU/Mem/Disk utilization (average) after process has completed

  - by BassKozz

  Ubuntu Server 9.10 So there is the time command which will show you the time it took for a specific process/command to run after the command has completed. For example: :~$ time ls real 0m0.020s user 0m0.000s sys 0m0.000s I'd like to also collect the average CPU usage, Memory, and Disk (i/o) utilization after the process has completed using time (or another command if necessary). How can I accomplish this? Mainly I am using this to benchmark MySQL import performance using different innodb_buffer_pool_size settings.

  Read the article

• Visual VoiceXML/VXML development tool?

  - by IVR Avenger

  Hi, all. Does anyone know of any tools out there that will let me run and debug a VXML application visually? There are a ton of VXML development tools, but they all require you to build your application within them. I have an existing application that uses JSPs to generate VXML, and I'm looking for a way to navigate through and debug the rendered VXML in much the same way that Firebug allows one to do this with HTML. I have some proxy-like tools that let me inspect the rendered code as it is sent to the VXML browser, but there's a ton of JS, which makes traversing the code by hand rather difficult. Has anyone worked with a product that allows for this? Thanks! IVR Avenger

  Read the article

• prevent filesystem from entering read-only mode

  - by user788171

  I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is still physically plugged into the system because I haven't had a chance to go over to the datacentre, I suspect udev and the system kernel is still picking up the bad disk and throwing errors. In /var/log/messages, there are errors like this: Mar 2 06:53:14 nocloud kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 2 06:53:14 nocloud kernel: ata1: irq_stat 0x00400040, connection status changed Mar 2 06:53:14 nocloud kernel: ata1: SError: { PHYRdyChg DevExch } Mar 2 06:53:14 nocloud kernel: ata1: hard resetting link Mar 2 06:53:20 nocloud kernel: ata1: link is slow to respond, please be patient (ready=0) Mar 2 06:53:21 nocloud kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 2 06:53:21 nocloud kernel: ata1.00: configured for UDMA/133 Mar 2 06:53:21 nocloud kernel: ata1: EH complete This happens fairly randomly throughout the day until eventually the filesystem becomes read-only. When this happens, my system becomes non-operational which kind of defeats the purpose of having a raid1. Note, ata1 is the bad disk (I think ata1 corresponds to /dev/sda because they are both first in line). Under mdadm, /dev/sda1,2 is no longer being used, but I can't prevent the system kernel from continuing to query that disk when I am no longer using it and throwing these errors. Is there a way to prevent my filesystem from automatically going into read-only mode? Furthermore, is it safe to do so? Thanks in advance. EDIT: Additional information: output from cat /proc/mdstat md1 : active raid1 sdb2[1] 976554876 blocks super 1.1 [2/1] [_U] bitmap: 5/8 pages [20KB], 65536KB chunk md0 : active raid1 sdb1[1] 204788 blocks super 1.0 [2/1] [_U] Output from mount: /dev/mapper/VolGroup-LogVol00 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/md0 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) EDIT2: pvdisplay output: --- Physical volume --- PV Name /dev/md1 VG Name VolGroup PV Size 931.32 GiB / not usable 2.87 MiB Allocatable yes (but full) PE Size 16.00 MiB Total PE 59604 Free PE 0 Allocated PE 59604

  Read the article

• Writing a Servlet that checks to see if JSP's exist and forwards to another JSP if they aren't

  - by Omar Kooheji

  I've beeb tasked with writing a servlet that intercepts a call to and JSP in a specific directoy, check that the file exists and if it does just forwarding to that file, if if doesn't I'm to forward to a default JSP. I've setup the web.xml as follows: <servlet> <description>This is the description of my J2EE component</description> <display-name>This is the display name of my J2EE component</display-name> <servlet-name>CustomJSPListener</servlet-name> <servlet-class> ... CustomJSPListener</servlet-class> <load-on-startup>1</load-on-startup> </servlet> ... <servlet-mapping> <servlet-name>CustomJSPListener</servlet-name> <url-pattern>/custom/*</url-pattern> </servlet-mapping> And the doGet method of the servlet is as follows: public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { logger.debug(String.format("Intercepted a request for an item in the custom directory [%s]",request.getRequestURL().toString())); String requestUri = request.getRequestURI(); // Check that the file name contains a text string if (requestUri.toLowerCase(Locale.UK).contains("someText")){ logger.debug(String.format("We are interested in this file [%s]",requestUri)); File file = new File(requestUri); boolean fileExists = file.exists(); logger.debug(String.format("Checking to see if file [%s] exists [%s].",requestUri,fileExists)); // if the file exists just forward it to the file if (fileExists){ getServletConfig().getServletContext().getRequestDispatcher( requestUri).forward(request,response); } else { // Otherwise redirect to default.jsp getServletConfig().getServletContext().getRequestDispatcher( "/custom/default.jsp").forward(request,response); } } else { // We aren't responsible for checking this file exists just pass it on to the requeseted jsp getServletConfig().getServletContext().getRequestDispatcher( requestUri).forward(request,response); } } This seems to result in an error 500 from tomcat, I think this is because the servlet is redirecting to the same folder which is then being intercepted again by the servlet, resulting in an infinite loop. Is there a better way to do this? I'm lead to believe that I could use filters to do this, but I don't know very much about them.

  Read the article

• Static Member Variables of the Same Class in C++

  - by helixed

  I'm trying to create a class which contains a static pointer to an instance of itself. Here's an example: A.h: #include <iostream> #ifndef _A_H #define _A_H class A { static A * a; }; A * a = NULL; #endif However, when I include A.h in another file, such as: #include "A.h" class B { }; I get the following error: ld: duplicate symbol _a in /Users/helixed/Desktop/Example/build/Example.build/Debug/Example.build/Objects-normal/x86_64/B.o and /Users/helixed/Desktop/Example/build/Example.build/Debug/Examplebuild/Objects-normal/x86_64/A.o I'm using the Xcode default compiler on Mac OS X Snow Leopard. Thanks, helixed

  Read the article

• Generic List<T> as IEnumerable<object>

  - by Avi

  I'm trying to do cast a List to an IEnumerable, so I can verify that different lists are not null or empty: Suppose myList is a List < T . Then in the caller code I wanted: Validator.VerifyNotNullOrEmpty(myList as IEnumerable<object>, @"myList", @"ClassName.MethodName"); The valdiating code would be: public static void VerifyNotNullOrEmpty(IEnumerable<object> theIEnumerable, string theIEnumerableName, string theVerifyingPosition) { string errMsg = theVerifyingPosition + " " + theIEnumerableName; if (theIEnumerable == null) { errMsg += @" is null"; Debug.Assert(false); throw new ApplicationException(errMsg); } else if (theIEnumerable.Count() == 0) { errMsg += @" is empty"; Debug.Assert(false); throw new ApplicationException(errMsg); } } However, this doens't work. It compiles, but theIEnumerable is null! Why?

  Read the article

• Enabling PostgreSQL support in PHP on Mac OS X

  - by Jordan Scales

  I'm having a terribly difficult time getting the command "pg_connect()" to work properly on my Mac. I'm currently writing a PHP script (to be executed from console) to read a PostgreSQL database and email a report. I've gone into my php.ini file and added extension=pgsql.so But, I'm met with the following error. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/extensions/no-debug-non-zts-20090626/php_pgsql.so' - dlopen(/usr/lib/php/extensions/no-debug-non-zts-20090626/php_pgsql.so, 9): image not found in Unknown on line 0 PHP Fatal error: Call to undefined function pg_connect() in... (blah file here) When running phpinfo(), I see nothing about PostgreSQL, so what is my issue here?

  Read the article

• Visual Studio 2005 - Debugger stopped working.

  - by eric

  More fun and pain with Visual Studio. Visual Studio 2005. About two months ago, I started an assignment. In my role, I cannot install or configure development software. Trust me this has given me plenty of heartburn. No IIS is involved here, just File Sharing. That being said, when I first started I had a problem with my debugger not working. The debugger just stopped. I was able to get it working. Now the problem has returned and I am pulling every last hair on my head. Almost none of my symbols loads. It can't find the PDB files. In Debugger options, I checked the Symbol section. My symbol file location entry is completely blank. ? I don't know why. I did not touch this prior to the problem occurring. I have cleared the Temporary ASP.NET folders. Example: Here is my Module Output CppCodeProvider.dll C:\Windows\assembly\GAC_MSIL\CppCodeProvider\8.0.0.0__b03f5f7f11d50a3a\CppCodeProvider.dll No No Cannot find or open the PDB file. 17 8.0.50727.762 12/2/2006 4:23 AM 6A510000-6A52C000 [1844] WebDev.WebServer.EXE: Managed WebDev.WebHost.dll C:\Windows\assembly\GAC_32\WebDev.WebHost\8.0.0.0__b03f5f7f11d50a3a\WebDev.WebHost.dll No No Cannot find or open the PDB file. 3 8.0.50727.42 9/23/2005 4:20 AM 6D040000-6D050000 [1844] WebDev.WebServer.EXE: Managed So I enabled the SHFUSION.dll in my versio of the the Framework I am using... In my GAC, I can see this version of WebDev.WebHost.dll for example: ProcessArchitecture(x86) Public key token matches: b03f5f7f11d50a3a 8.0.50727.42 I then see some custom dlls. I should note, I created a new project. Recreated my files manually by importing them. The debugger worked 5 times and died. I'm at a loss of what to do next? The obvious has been checked: The project is set to Debug Configuration Manager Configuration Debug Platform .NET Build : checked. Web.Config: I have attempted to manually attach to the Webdev process from the Debug window and that doesn't work. I have googled this and this problem seems to occur quite a bit.

  Read the article

• Error building java project

  - by Leandro

  I have tryied to build my project in netbeans 6.8/ windows xp, and I've received this errors: ..\nbproject\build-impl.xml:452: The following error occurred while executing this line: ..\nbproject\build-impl.xml:224: Compile failed; see the compiler error output for details.output for details. The lines are, respectively: 452: `<j2seproject3:javac gensrcdir="${build.generated.sources.dir}"/>` 224: <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}"> I have tried to reinstall netbeans, java, and anything more...but I can't resolve this error. Do someone know how can I fix it? All the best! Leandro

  Read the article

• Creating multiple log files of different content with log4j

  - by Daniel

  Is there a way to configure log4j so that it outputs different levels of logging to different appenders? I'm trying to set up multiple log files. The main log file would catch all INFO and above messages for all classes. (In development, it would catch all DEBUG and above messages, and TRACE for specific classes.) Then, I would like to have a separate log file. That log file would catch all DEBUG messages for a specific subset of classes, and ignore all messages for any other class. Is there a way to get what I'm after? Thanks, Dan

  Read the article

• Linux Fiber Channel Host Setup Basic

  - by Jim

  I've been googling for about 4 hours now with no luck. I am trying to setup a Linux server running Oracle Server 6.3 as a Fiber Channel host. And then connect it to a Dell Compellent Fibre Channel Host contain a 500GB Volume. The Oracle server itself contains two Brocade 815 FC HBAs. I've discovered their WWN(I think) via cat /sys/class/fc_host/host1/port_name 0x100000051efc3d85 cat /sys/class/fc_host/host2/port_name 0x100000051efc3d9f The next part is where I am at a loss. I've used iSCSI before...is FC the same deal where you have an initiator and a target? If so where do I specific that in linux? I'm also new to Fiber Channel as a protocol, so i am unsure what is needed to make a transaction? WWN and port ID? Similar to IP:Port combination in the Ethernet world. I've read alot regarding using systool, multipath, fc_transport commands, however none of these is recognized as a valid command from Oracle Server 6.3 Appreciate the guidance and assistance. I installed sccsi-target-utils and can now run rescan-scsi-bus and sg_map -x. rescan-scsi-bus.sh -l -w -r Host adapter 0 (megaraid_sas) found. Host adapter 1 ((null)) found. Host adapter 2 ((null)) found. Host adapter 3 (ata_piix) found. Host adapter 4 (ata_piix) found. Scanning SCSI subsystem for new devices and remove devices that have disappeared Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15, LUNs 0 1 2 3 4 5 6 7 Scanning for device 0 2 0 0 .... OLD: Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning for device 0 2 1 0 ... OLD: Host: scsi0 Channel: 02 Id: 01 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 1 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 1 0 3 1 ... OLD: Host: scsi1 Channel: 00 Id: 03 Lun: 01 Vendor: COMPELNT Model: Compellent Vol Rev: 0505 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 2 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning host 3 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 3 0 0 0 ... REM: Host: scsi3 Channel: 00 Id: 00 Lun: 00 DEL: Vendor: TEAC Model: DVD-ROM DV-28SW Rev: R.2A Type: CD-ROM ANSI SCSI revision: 05 Scanning host 4 channels 0 for SCSI target IDs 0, LUNs 0 1 2 3 4 5 6 7 0 new device(s) found. 1 device(s) removed. and sg_map -x /dev/sg0 0 0 32 0 13 /dev/sg1 0 2 0 0 0 /dev/sda /dev/sg2 0 2 1 0 0 /dev/sdb /dev/sg4 1 0 3 1 0 /dev/sdc I'm not sure what this all means...

  Read the article

• Cannot populate form with ajax and populate jquery plugin

  - by Azriel_

  I'm trying to populate a form with jquery's populate plugin, but using $.ajax The idea is to retrieve data from my database according to the id in the links (ex of link: get_result_edit.php?id=34), reformulate it to json, return it to my page and fill up the form up with the populate plugin. But somehow i cannot get it to work. Any ideas: here's the code: $('a').click(function(){ $('#updatediv').hide('slow'); $.ajax({ type: "GET", url: "get_result_edit.php", success: function(data) { var $response=$(data); $('#form1').populate($response); } }); $('#updatediv').fadeIn('slow'); return false; whilst the php file states as follow: <?php $conn = new mysqli('localhost', 'XXXX', 'XXXXX', 'XXXXX'); @$query = 'Select * FROM news WHERE id ="'.$_GET['id'].'"'; $stmt = $conn->query($query) or die ($mysql->error()); if ($stmt) { $results = $stmt->fetch_object(); // get database data $json = json_encode($results); // convert to JSON format echo $json; } ?> Now first thing is that the mysql returns a null in this way: is there something wrong with he declaration of the sql statement in the $_GET part? Second is that even if i put a specific record to bring up, populate doesn't populate. Update: I changed the populate library with the one called "PHP jQuery helper functions" and the difference is that finally it says something. finally i get an error saying NO SUCH ELEMENT AS i wen into the library to have a look and up comes the following function function populateFormElement(form, name, value) { // check that the named element exists in the form var name = name; // handle non-php naming var element = form[name]; if(element == undefined) { debug('No such element as ' + name); return false; } // debug options if(options.debug) { _populate.elements.push(element); } } Now looking at it one can see that it should print out also the name, but its not printing it out. so i'm guessing that retrieving the name form the json is not working correctly. Link is at http://www.ocdmonline.org/michael/edit%5Fnews.php with username: Testing and pass:test123 Any ideas?

  Read the article

• A tool or framework extension or code snippet for logging the internal state of objects?

  - by George Mauer

  When spiking on how something works or when my unit test behave in an unpredictable manner I usually have to drop into debug mode. 99% of my time in debug mode is spent checking the values of fields on objects to verify its state. I already have log4net set up, it would seem that if I could easily add a line of code to log out the state of objects I could remove most of my need to start up the bulky debugger. The problem is of course that to expose object state implicitly you need to manually override each object's ToString() method. What I would like to be able to do is the ability to do logger.LogState(someObject) and have logged out the object state including at least a formatted list of all the private variables, references (to some arbitrary depth), and collections. Does anyone know a tool/framework/code snippet that can be used to generate a string of the internal state of any object? I could of course write one myself but its a non-trivial problem and I'd prefer something someone has put some thought into.

  Read the article

• Seemingly useless debugging environment for Android

  - by mikeY

  I've just started debugging my first three line long android app and I can't seem to use the debug tool like I want to. Here's my code: public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); int a = 1 / 0; } Now I expect the debugger to halt the thread and show me the line number of statement where the division by zero occurs. No, instead it shows some other method internal to the system for which I have no source. To make the matters worse, there is no exception message either. Prior to this app, I created one which would do something when a button was pressed. If any exception was raised, again no useful line number or exception message would be shown. As of right now, there is no way to debug my app. Any ideas? I'm using the latest SDK along with Eclipse ADT plugin and debugging on a real device (Nexus One).

  Read the article

• Compiling GData for iPhone

  - by spin-docta

  Hi, I'm trying to compile a project that uses the GData objective-c framework. I've successfully compiled and run the project under the 'Debug' configuration, but when I try to compile using 'Release' and now 'Adhoc' I get the following errors. NOTE: I duplicated the debug configuration for adhoc and that doesn't seem to help. "_kGDataGoogleAnalyticsDefaultAccountFeed", referenced from: _kGDataGoogleAnalyticsDefaultAccountFeed$non_lazy_ptr in TKGoogleAnayliticsAPI.o ".objc_class_name_GDataFeedAnalyticsAccount", referenced from: literal-pointer@_OBJC@_cls_refs@GDataFeedAnalyticsAccount in TKGoogleAnayliticsAPI.o ".objc_class_name_GDataFeedAnalyticsData", referenced from: literal-pointer@_OBJC@_cls_refs@GDataFeedAnalyticsData in TKGoogleAnayliticsAPI.o ".objc_class_name_GDataQueryAnalytics", referenced from: literal-pointer@_OBJC@_cls_refs@GDataQueryAnalytics in TKGoogleAnayliticsAPI.o ".objc_class_name_GDataServiceGoogleAnalytics", referenced from: literal-pointer@_OBJC@_cls_refs@GDataServiceGoogleAnalytics in TKGoogleAnayliticsAPI.o ld: symbol(s) not found collect2: ld returned 1 exit status

  Read the article

• activities stack

  - by klaus-vlad

  Is there a way to vizualise the activity stack, at some moment during debug, or normal run ?

  Read the article

• Right edge border unpainted & theme drawing on non client area

  - by CodeVisio

  Basically, the problem concerns border flickering during window resizing on Windows. My first goal was to repositioning controls on a dialog during resizing of it. I think I got a good dynamic repositioning without almost any flickering during this operation, but here I'm talking about main window border flickering. However, I wasn't able to eliminate it at all. To simplify the example try to create a simple win32 app with default code VS provided. I'm testing it on Window 7(64bit) with the default theme (Windows 7 basic, no transparency) and VS2008. 1) Do not add code to the app. 2) run it in debug mode. 3) Drag the left edge of the window slowly toward the left of the screen and at the same time keep an eye on the right edge border of the window. You should see a redrawing taking in action. 4) Repeat step 3 moving rapidly the mouse, you should see the flickering on the right edge more clearly. If you invert the edge, that is moving the right edge of the window, then the left edge stay firmly there without unpainted regions. The same process happens for the top edge border vs. the bottom one. Now, enable he Classic Theme (that similar to Win2000) and repeat again the steps above. The right edge is perfectly there without flickering at all! If you keep an eye in the Output Window of Visual Studio when you run in debug mode you should see a list of dll loaded together with your exe. If you run in debug mode with the default theme you will see uxtheme.dll loaded. On the contrary, with classic theme enabled the uxtheme.dll is not loaded (dwmapi.dll is always loaded). Probably uxtheme.dll is loaded at runtime, based on desktop settings and it takes in action for redrawing your windows non-client area. Another trick you could use to see the effect of this flickering is to add a case for WM_NCPAINT and return 0 instead to call the DefWindowProc(). Repeating the steps above and moving fast you should see a big part of the right edge of the window completely erased by background windows. This doesn't happen for the top and bottom ones. Any idea to resolve this flickering? Thank you!

  Read the article

• sql exception when transferring project from usb to c:\

  - by jello

  I'm working on a C# windows program with Visual Studio 2008. Usually, I work from school, directly on my usb drive. But when I copy the folder on my hard drive at home, an sql exception is unhandled whenever I try to write to the database. it is unhandled at the conn.Open(); line. here's the exception unhandled Database 'L:\system\project\the_project\the_project\bin\Debug\PatientMonitoringDatabase.mdf' already exists. Choose a different database name. Cannot attach the file 'C:\Documents and Settings\Administrator\My Documents\system\project\the_project\the_project\bin\Debug\PatientMonitoringDatabase.mdf' as database 'PatientMonitoringDatabase'. it's weird, because my connection string says |DataDirectory|, so it should work on any drive... here's my connection string: string connStr = "Data Source=.\\SQLEXPRESS;AttachDbFilename=|DataDirectory|\\PatientMonitoringDatabase.mdf; " + "Initial Catalog=PatientMonitoringDatabase; " + "Integrated Security=True"; what's going on here?

  Read the article

• server will not reply (syn -ack)

  - by Brent

  I like to use the following commands to manage 'TIME_WAIT', in the hope to free up resources. echo 20 > /proc/sys/net/ipv4/tcp_fin_timeout sysctl -w net.ipv4.tcp_tw_reuse=1 sysctl -w net.ipv4.tcp_tw_recycle=1 I found something interesting while doing a tcpdump. Sometimes if a client makes a connection (syn), the server will not reply (syn -ack). My question is, could it be because of the top three commands.

  Read the article

• Monkey command on android phone?

  - by Sephy

  Hi guys, I'm ok using monkey command on the emulator but is it possible to launch it on a phone i'm using for debug?

  Read the article

• 'Programming by Coincidence' Excercise: Java File Writer

  - by Tapas

  I just read the article Programming by Coincidence. At the end of the page there are excercises. A few code fragments that are cases of "programming by coincidence". But I cant figure out the error in this piece: This code comes from a general-purpose Java tracing suite. The function writes a string to a log file. It passes its unit test, but fails when one of the Web developers uses it. What coincidence does it rely on? public static void debug(String s) throws IOException { FileWriter fw = new FileWriter("debug.log", true); fw.write(s); fw.flush(); fw.close(); } What is wrong about this?

  Read the article

• MSBuild - setting a reference path

  - by Ryan

  I have several assemblies my project is dependant upon. These are stored in the Project's directory under the "Dependencies" folder. So something like this. Solution - Project - Dependancies FunkyAssembly.dll - bin - Debug - Release SomeCode.cs I've referenced FunkyAssembly.dll using Browse and in project.csproj I see <Reference Include="FunkyAssembly"> <HintPath>Dependancies\FunkyAssembly.dll</HintPath> </Reference> So far so good - except after a release build FunkyAssembly.dll is copied to the Release directory (not a problem in itself) but then future debug builds will reference this copy rather than the copy in Dependencies. You can see this if you at Path in the reference properties. This means that if Dependencies\FunkyAssembly.dll is updated the build won't pick it up as its referencing the old copy in bin/Release. Any way to FORCE the damn thing to pick up Dependencies\FunkyAssembly.dll rather than HINT?

  Read the article

• How to automate BlackBerry debugging with Eclipse?

  - by pajton

  I am developing application for BlackBerry 8900 and I am using features that force me to test/debug it on the real device. I am looking for a convenient way to be able to automate build-deploy-lanuch process. The process is: Package application & sign it Load it on the device Start debugging session in Eclipse With the newest version of BlackBerry plugin for Eclipse, step 1. is almost painless, but I would like to get rid of dialogs that I am missing some debug files. Step 2. and step 3. must be performed manually. Ideally I would like to turn it all into one script, Eclipse macro, whatever.... Has anyone tried something like this with any success?

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >