Search Results

Search found 86974 results on 3479 pages for 'visualsvn server'.

Page 1288/3479 | < Previous Page | 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295  | Next Page >

• AIX network parameters to close TCP sockets of unplugged devices

  - by ADD Geek

  Hi there We have an AIX box, running what we call in banking "ATM Switch" not the ATM networking switch, but the bank ATM driver. where we have some ATM machines connected to two server processes. The problem is, when we disconnect any of these machines, the netstat -na| grep <port number> command shows that the socket established for this disconnected device is still established, we have to manually send a command from the software to make the socket aware that it is not live anymore. Is there a parameter on tcp level to make this connection aware within a minute or two that this device is not connected anymore? we had the following parameters set with root privileges: no -o tcp_keepidle=1000 no -o tcp_keepcnt=2 no -o tcp_keepintvl=150 no -o tcp_finwait2=100 it was originally having the default values. but even after we changed these parameters and restarted the server processes, the problem was still there.

  Read the article

• HowTo access Samba Share over VPN Tunnel?

  - by Jeff

  I don't know how to access a Samba share running on a Ubuntu 10.04 server through OpenVPN 2.1.0. I've installed & configured OpenVPN and everything works. The server end of the tunnel has the IP of 10.8.0.1. When I connect from XP (over our local network) I'm given the IP of 10.8.0.6. I can ping and trace route from both ends of the tunnel. Now, I'm lost...how to access the Samba share from XP and from OS X?

  Read the article

• How to share internet over VPN and inside a virtual machine (Windows)?

  - by mountrix

  ` My final goal is to have a virtual machine at work in which anything that happen inside (tcp, udp, ping, ...) will use the Internet connection of a computer at home. So, if inside this VM should I open an Internet browser to a site such as "show my IP", my home IP should be printed. I am also looking for a way to debug/develop a software inside this VM, but I would like to tunnel only the connections of this software, not the full graphical interface, this is why a Remote Desktop solution won't fit me. The connection between the both computer should be secured somehow, like in a SSH tunnel. This ultimately should allow me to have a portable VM in which I can connect to whatever networks I have access at home, in a secure way. This is my configuration: At work, I have a LAN-connected desktop computer, with Windows 7 Professional Edition as a host [computer W] On this same computer, I have a Virtual Box machine running Windows XP [computer V] At home, I have a laptop computer, running Windows 7 Home Edition [computer H] This laptop is connected to a Livebox 2 broadband modem by Wifi. What I am trying to do is to sit at work in front of the virtual machine [V], and connect to a webpage as if the request was issued from the laptop [H] at home, and the data should be securely tunneled between the both. But if I am using internet directly inside [W], it should use the normal LAN interface at work. To achieve my goal, I first try using VPN, than SSH tunneling, without success. I first tried to install Teamviewer between [W] and [H]. This is working fine, I can send files, share desktop, etc. Teamviewer has a VPN mode that creates a new VPN network interface with its own IP, both on computer [W] and [H]. This allowed me to connect [H] as a network computer inside [W] and I was able to share files, but not to share Internet. At this point, I tried to use from [W] the Internet as if I was at home. I setup a route (using route add from command line in [W]) in order to instruct each packet going to a given website to pass by the new VPN interface on [W], with the hope it will be forwarded to [H], but the webpage was simply inaccessible. I then tried to setup a Windows VPN connection between [W] and [H], using the Windows 7 VPN feature. [H] was the server and [W] the client. But it failed: I got the "Unable to join a remote PC while trying to VPN" 720 Error when I was setting up the client on [W]. I think the problem is the Livebox 2 that could blocks the packets. But I am not sure of this: 1) with Teamviewer it works fine, 2) Livebox 2 has a configuration page for port mapping that gives the proper configuration to map VPN ports as an example so I guess that it should allow it, 3) I opened the ports 1723 (TCP) and 500 (UDP) according to some forums. Virtual box has a network configuration parameter in which I can use the VPN network interface created by Teamviewer as a bridged connection. This is suppose to work in the sense that all packets issued by the virtual machine [V] is supposed to go directly to [H]. But I had no internet connection inside [V]. Using the NAT mode, [V] has internet. For me this is the feature that I look for: filtering all connections from the virtual box application to the VPN network interface, and the remaining should use the normal LAN interface. Apart from the build-in feature of VBox, I even do not know if it is possible to route the packet from a given application to a given interface. Finally I tried also SSH tunneling, but this is not the solution I looked for. Using an external SSH server (Linux), I was able to create a localhost connection on [W] (or [V]), using something like 'ssh -N -D server[H]' in order to allow a web browser located in [W] to connect to any website using the SOCKS 5 proxy created locally (SOCKS is a build-in feature of SSH). But repeating the same operation on windows, using a windows SSH server inside [W] (I tried freeSSHd), it failed: SFTP worked, but not the SOCKS tunneling, it was like the browser in [H] did not find internet. Finally only Teamviewer looked able to create a VPN between [W] and [H], but I am not able to use it, as I want, I mean using the Internet connection of [H] sitting in front of [W]. I also tried to bridge the VPN interface and the wifi interface inside [H], but it blocked my laptop, and I tried also the Internet Connection Sharing, trying to share on [H] the wifi connection over the VPN interface. This fails also, but it seems because Teamviewer actually use the wifi interface to be able to provide the VPN link, so I guess I am creating a recursive loop. I do not know what to try next... Thank you for any advice!!

  Read the article

• Slow IE8 Start-up due to LDAP DNS queries

  - by MikeJ-UK

  Recently (in the last few days), my installation of IE8 has been taking 15 to 20 seconds to load my home page. Specifically, the sequence of events (as reported by WireShark) is:- Browser issues a DNS A query to resolve the home page server's IP address. Browser then spends the next 15-20 seconds broadcasting DNS SRV _LDAP._TCP queries, (roughly on a 2 second tick) to which it receives no answer (we have no LDAP servers). Browser re-issues the DNS A query and resolves the server's IP address again. Finally, the browser issues an HTTP GET for the home page. Does anyone know why this is happening? Possibly related to this question EDIT: @Massimo, LDAP query is :- Domain Name System (query) Transaction ID: 0x11c5 Flags: 0x0100 (Standard query) Questions: 1 Answer RRS: 0 Authority RRS: 0 Additional RRS: 0 Queries _LDAP._TCP: type SRV, class IN Name: _LDAP._TCP Type: SRV (Service location) Class: IN (0x0001)

  Read the article

• Security question pertaining web application deployment

  - by orokusaki

  I am about to deploy a web application (in a couple months) with the following set-up (perhaps anyways): Ubuntu Lucid Lynx with: IP Tables firewall (white-list style with only 3 ports open) Custom SSH port (like 31847 or something) No "root" SSH access Long, random username (not just "admin" or something) with a long password (65 chars) PostgreSQL which only listens to localhost 256 bit SSL Cert Reverse proxy from NGINX to my application server (UWSGI) Assume that my colo is secure (Physical access isn't my concern for the time being) Application-level security (SQL injection, XSS, Directory Traversal, CSRF, etc) Perhaps IP masquerading (but I don't really understand this yet) Does this sound like a secure setup? I hear about people's web apps getting hacked all the time, and part of me thinks, "maybe they're just neglecting something", but the other part of me thinks, "maybe there's nothing you can do to protect your server, and those things are just measures to make it a little harder for script kiddies to get in". If I told you all of this, gave you my IP address, and told you what ports were available, would it be possible for you to get in (assuming you have a penetration testing tool), or is this really protected well.

  Read the article

• Web Deploy to IIS7 fails with 401 (Unauthorized)

  - by Trex

  we have IIS7 running on Windows Web Server 2008 R2 and it's set up to support Web Deploy. It worked fine when we used the default Administrator account. We recently disabled this account (for security reasons) and are now trying to deploy using another account which is member of the Administrators group, but the deploy fails with 401 (Unauthorized). More specifically, it says: Connected to '<IP>' using Web Deployment Agent Service, but could not authorize. Make sure you are an admin on '<IP>'. The remote server returned an error: (401) Unauthorized. Anybody has any ideas why this is happening? Thanks. Trex

  Read the article

• How to avoid Master Browser errors, MRxSmb Event ID 8003?

  - by Sanoj

  I have a domain with Windows SBS 2003 as domain controller. It's very common to get Master Browser errors in the logs, MRxSmb Event ID 8003. How can I avoid that? What have I done wrong? I know how to solve this: Stop the Computer Browser service on clients, but I don't know how to avoid this since the problem comes back every time I add a new client and I forget to stop the Computer Browser service. Error message: The master browser has received a server announcement from the computer [computer] that believes that it is the master browser for the domain on transport NetBT_Tcpip_{#######-####-####-#. The master browser is stopping or an election is being forced. Is there an configuration of the server to avoid this problem?

  Read the article

• SharePoint 2010 search crawl not working

  - by J. Hammond

  I have the following set up: 1 x Windows server 2008 R2 running SQL 1 x Windows server 2008 R2 running SharePoint 2010. I have an issue with the search service application, the crawl appears to run for a never ending amount of time with 0 successes and 0 failures. Checking the Search Application Topology, I find that "Query Component 0" is "Not Responding". I have tried the following: I have ensured that the index directory has the right permissions applied to it and the search service account is in the right groups to consume those permissions. I have re-created the search service application. I have restarted the search service manually. I have trawled the net as much as possible to find a solution but as of yet have not come across something that has resolved this issue. Any input will be very much appreciated

  Read the article

• Amazon EC2 pem file stopped working suddenly

  - by Jashwant

  I was connecting to Amazon EC2 through SSH and it was working well. But all of a sudden, it stopped working. I am not able to connect anymore with the same key file. What can go wrong ? Here's the debug info. ssh -vvv -i ~/Downloads/mykey.pem [email protected] OpenSSH_6.1p1 Debian-4, OpenSSL 1.0.1c 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-54-222-60-78.eu.compute.amazonaws.com [54.229.60.78] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/home/jashwant/Downloads/mykey.pem" as a RSA1 public key debug1: identity file /home/jashwant/Downloads/mykey.pem type -1 debug1: identity file /home/jashwant/Downloads/mykey.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1.1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1.1 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1p1 Debian-4 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "ec2-54-222-60-78.eu.compute.amazonaws.com" from file "/home/jashwant/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/jashwant/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA d8:05:8e:fe:37:2d:1e:2c:f1:27:c2:e7:90:7f:45:48 debug3: load_hostkeys: loading entries for host "ec2-54-222-60-78.eu.compute.amazonaws.com" from file "/home/jashwant/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/jashwant/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "54.229.60.78" from file "/home/jashwant/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/jashwant/.ssh/known_hosts:5 debug3: load_hostkeys: loaded 1 keys debug1: Host 'ec2-54-222-60-78.eu.compute.amazonaws.com' is known and matches the ECDSA host key. debug1: Found key in /home/jashwant/.ssh/known_hosts:4 debug1: ssh_ecdsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: jashwant@jashwant-linux (0x7f827cbe4f00) debug2: key: /home/jashwant/Downloads/mykey.pem ((nil)) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: jashwant@jashwant-linux debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug1: Trying private key: /home/jashwant/Downloads/mykey.pem debug1: read PEM private key done: type RSA debug3: sign_and_send_pubkey: RSA 9b:7d:9f:2e:7a:ef:51:a2:4e:fb:0c:c0:e8:d4:66:12 debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey). I've already googled everything and checked : Public DNS is same (It hasnt changed), Username is ubuntu as it's a Ubuntu AMI ( Used the same earlier), Permission is 400 on mykey.pem file ssh port is enabled via security groups ( Used the same ealier )

  Read the article

• IMAP can't access virtual account sharing name with local user account

  - by chernevik

  I am setting up a postfix/dovecot mail server with virtual accounts, per the Chris Haas tutorial. I'm finding that virtual users who also have local user accounts on the mail server cannot access their email remotely via IMAP. They're told they cannot login. (I'm using Thunderbird for that). These same users can login when emulating IMAP locally via telnet. Virtual users without local accounts have no trouble with IMAP access from remote clients. These local user accounts have vestiges of prior efforts in their home directories: mbox files, Mail and mail directories. I've looked at the logs for clues to where the remote login process is failing (dovecot authentication failure? confusion over where emails are stored?) but found nothing helpful. I haven't found much in the dovecot or postfix documentation that describes the IMAP login process and expectations in enough detail to help me diagnose this. So: how do I go about identifying the problem and researching a solution?

  Read the article

• How to setup anonymous access in WinSSHD

  - by Shrike

  I have a Windows server (Win2008R2) with WinSSHD installed. I need to allow anonymous access to a particular folder on the server. Actually it's a git repositiory for bower registy but it doesn't matter. I want WinSSHD allow me to connect to an endpoint like "ssh://[email protected]/" I've created a virtual user "bower" with password only auth. No keys. But if I leave empty password then WinSSHD doesn't allow connection with error "Incorrect virtual account password". How to setup a SSH access without any authentication?

  Read the article

• Properly Hosting Multiple Sites on VDS

  - by Aristotle

  I'm going to be moving about 7-10 websites (5-8 with Databases - MySQL) onto our new Virtual Private Server. I'm curious what the best way to host many sites on a single server is though. Do I create a directory for each site immediately within my root directory, and then point the domain names for each site to http://123.123.123.123/siteDirectory - or is there a more appropriate way to do this? I'm very interested in maintining control over how many concurent connections each site can have at any given time - would I be able to do that on the directory-level, or am I required to limit the concurrent-connections to the VPS itself?

  Read the article

• Site Isn't Enabled When Apache Restarted and No Error Message

  - by curiouscat

  I have added a new sites-available file but the site isn't enabled when apache is restarted. All the existing sites continue to work fine. There is no error message in /var/log/apache2/error.log There is the message, in the error log showing that I shut down the server and restarted: caught SIGTERM, shutting down There is nothing fancy about the site. The only special thing is the name is: domain_name.tv I can't imagine why that would matter, but at this point I can't imagine why the site isn't enabled or at least an error message given. Server running Ubuntu 12.04.

  Read the article

• Why does bash invocation differ on AIX when using telnet vs ssh

  - by Philbert

  I am using an AIX 5.3 server with a .bashrc file set up to echo "Executing bashrc." When I log in to the server using ssh and run: bash -c ls I get: Executing bashrc . .. etc.... However, when I log in with telnet as the same user and run the same command I get: . .. etc.... Clearly in the telnet case, the .bashrc was not invoked. As near as I can tell this is the correct behaviour given that the shell is non-interactive in both cases (it is invoked with -c). However, the ssh case seems to be invoking the shell as interactive. It does not appear to be invoking the .profile, so it is not creating a login shell. I cannot see anything obviously different between the environments in the two cases. What could be causing the difference in bash behaviour?

  Read the article

• Force Finder to log in as Guest to a SMB share

  - by slhck

  I have a QNAP NAS that offers a few SMB shares. As I'm in a trusted environment, my shares are accessible as guest rather than with a combination of username and password. Problem Now, when I click the name of the device in Finder's sidebar, I get the black "Connection failed" bar, with the option "Connect as...". When I click that, I receive: I can however press ? + K and enter the server's name manually, which gets me to this window: Here, I have to select "guest". Now, I can select one of the shares to connect to, and I'm finally connected to the server. If I select it in the sidebar, I get a list of all shares available, because I'm connected as "guest", obviously: What I need Well, as soon as I unmount all shares, I have to go through the same procedure of manually logging in as "guest" again, which I find quite annoying. Is there any way I could get Finder (or the underlying SMB client) to know which credentials to use? Or should I look for the solution rather on the server side? (I know that other SMB shares seem to work fine in my network) Diagnostics The only thing I can get out of Console.app is: 5/15/11 7:36:40 PM /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[200] SharePointBrowser::handleOpenCallBack returned 64 This message occurs when I click the name of the SMB server in the Finder sidebar. Here's the output of `smbclient -L meredith -U guest -d=2 charon:~ werner$ smbclient -L meredith -U guest -d=2 added interface ip=192.168.100.11 bcast=192.168.100.255 nmask=255.255.255.0 tdb(unnamed): tdb_open_ex: could not open file /private/var/samba/gencache.tdb: Permission denied Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Password: Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Sharename Type Comment --------- ---- ------- music Disk movies Disk photos Disk software Disk archive Disk backups Disk IPC$ IPC IPC Service (NAS Server) Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Server Comment --------- ------- Workgroup Master --------- ------- WORKGROUP MEREDITH Also, things I've tried: There is no relevant entry in the Keychain (but why would it, I'm only connecting as guest) Connecting with user name "Guest" and empty password logs me in but still after ejecting the last share, I get the same "Connection failed" error as before. The appropriate entry is made in the Keychain but obviously has no effect.

  Read the article

• Multiple CAS servers with Microsoft Exchange and selective authorization

  - by John Wilcox

  I have a Microsoft Exchange 2010 organization within one Microsoft Windows domain and I have users accessing it through OWA. For simplicity lets say I currently have one CAS server (CAS 1) which is accessible only through a VPN connection. Lets call the users connecting to the first CAS group a. For some users though, I need to install another CAS server (CAS 2) so that they can connect without using a VPN connection. Lets call those users group b. What I need to achieve is that group a can only log in to CAS 1 and group b can only log in to CAS 2. Now I know that one can disable/enable OWA per user but in my case that is not enough because OWA must be enabled for both groups.

  Read the article

• Filesystem access through web interface

  - by Jorge Suárez de Lis

  I have an SSH+Samba server so people can access its files from anywhere on the network. I thought it would be also interesting to provide access through a web interface, so they can access the files even when they don't have access to the VPN or a Samba/SSH client. Something like the Ubuntu One or Dropbox web interface. The http server could be on the same machine as the SSH+Samba, so it should just provide access to local files and some way to login with their username/password. Someone knows any software like this?

  Read the article

• Linux: Can that command "break" the machine?

  - by poru

  Hello, my server (Ubuntu) doesn't went right and I think it's because I entered that command: mv directory/* /*

  Read the article

• What should I know before I set up RAID 6 on Linux?

  - by Dan Ellis

  I just ordered five 1TB drives to install as a RAID 6 array in a Linux server (keeping the existing 1TB drive as a boot disk). I want to use Linux MD for RAID rather than a RAID card, to avoid lock-in. The intended use is for storing filesystems for Xen development environments and an AFP server for iPhoto/Aperture/Lightroom. What things should I know before I set it up? For example, what would be a good choice of filesystem, and what chunk size should I use?

  Read the article

• Is there a free-embedded SSH solution ?

  - by ereOn

  Hi, I'm working for an important company which has some severe network policies. I'd like to connect from my work, to my home linux server (mainly because it allows me to monitor my home-automated installation, but that's off-topic) but of course, any ssh connection (tcp port 22) to an external site is blocked. While I understand why this is done (to avoid ssh tunnels I guess), I really need to have some access to my box. (Well, "need" might be exagerated, but that would be nice ;) Do you know any web-based solution that I could install on my home linux server that would give me some pseudo-terminal (served using https) embedded in a web page ? I'm not necessarily looking for something graphical: a simple web-embedded ssh console would do the trick. Or do you guys see any other solution that wouldn't compromise network security ? Thank you very much for your solutions/advices.

  Read the article

• Export SSL Cert from IIS and import into GlassFish keystore

  - by Tim H

  What I need: I have an existing SSL certificate installed on IIS 6. On the same machine, I have GlassFish installed and would like to share the same certificate since they both share the same hostname, and they use different ports: IIS uses 443 and GlassFish uses 8181. Why I need it: Reuse existing SSL certs from IIS to GlassFish. I imagine that this is possible. I am able to install an SSL cert into GlassFish's keystore, and then import the same exact cert into IIS. I just want to go the other way - imagine having an SSL cert on IIS being used for months, and now I want to enable SSL on GlassFish. What I have done: Created a keystore with an alias: server.hostname.com Imported intermediate CA certs associated with the existing SSL Cert Imported the existing SSL cert with the same alias: server.hostname.com, but the keytool won’t allow this, as it is not associated: keytool error: java.lang.Exception: Public keys in reply and keystore don't match Why? Using a different alias causes the cert to not be trusted in the CA chain.

  Read the article

• Access writes issue in MAC

  - by user594738

  Hi All, I have a MAC machine running MAC OS Version 10.6.6. I have added my mac machine to a domain controller (which runs Windows version of server) and allow users from domain controller to login. Because of our server migration, we removed the mac machine from old domain controller and added it to the new domain controller. Users in the old domain controller are copied to new domain controller. When I login into mac (which is added to new domain controller) with the domain controller user credentials, I was not able to access my desktop folders and any other folders in my users directory. It says "The folder Desktop can't be opened because you don't have permission its contents" Any idea why I was not able to access my home directory and how can I resolve this issue...!

  Read the article

• Connecting to localhost resolves 127.0.0.1 but connects with external IP [Linux, Debian]

  - by skgsergio

  I'm having a problem with a dedicated server, I don't known if it's the default behavior but this is the problem: If I connect to a service located on the server with localhost the service gets as source IP the external IP. Let me show an example, I use netcat for listening on 127.0.0.1:4444 xxxxxx # nc -vv -l -s 127.0.0.1 -p 4444 listening on [127.0.0.1] 4444 ... Lets check if it's ok: xxxxxx ~ # netstat -atnp | grep 4444 tcp 0 0 127.0.0.1:4444 0.0.0.0:* LISTEN 14038/nc Ok lets connect: xxxxxx ~ # nc -vv 127.0.0.1 4444 localhost [127.0.0.1] 4444 (?) open Return to the tty that have the listening process and I get this: connect to [127.0.0.1] from xxxxxx.net [176.31.xxx.xx] 50354 So that's the problem. I have a server daemon that have to listen on localhost and checks that the ip is 127.0.0.1 when the client connects but for some reason when I connect to localhost it reports the external ip... If I do the same with IPv6 it works as excepted... Detects connection as localhost (::1). Some info that can be useful: "localhost" resolves without problems to 127.0.0.1 xxxxxx ~ # ping -c1 localhost PING localhost (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost (127.0.0.1): icmp_req=1 ttl=64 time=0.086 ms Nothing weird on my hosts file, I think... xxxxxx ~ # grep -v ^# /etc/hosts 127.0.0.1 localhost localhost.localdomain 176.31.xxx.xx xxxxxx.net ns1.xxxxxx.net ::1 ip6-localhost ip6-loopback feo0::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts And ifconfig reports all ok... eth0 Link encap:Ethernet HWaddr e0:69:95:d8:30:a1 inet addr:176.31.xxx.xx Bcast:176.31.108.255 Mask:255.255.255.0 inet6 addr: 2001:41d0:8:xxxx::/64 Scope:Global inet6 addr: 2001:41d0:8:xxxx:x:xx:xx:xx/64 Scope:Global inet6 addr: fe80::e269:95ff:fed8:30a1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16916 errors:0 dropped:0 overruns:0 frame:0 TX packets:16914 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8410679 (8.0 MiB) TX bytes:10539881 (10.0 MiB) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:5570 errors:0 dropped:0 overruns:0 frame:0 TX packets:5570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:744490 (727.0 KiB) TX bytes:744490 (727.0 KiB)

  Read the article

• Multiple nt52 entries in bootmgr

  - by SLaks

  I have a machine with Windows XP, Server 2003 R2, and Server 2008 R2. Right now, bootmgr has one entry for Server 2008 R2 and one entry for ntldr, which then leads to the ntldr boot.ini menu. Is it possible to add two different nt52 entries on two partitions so that I can access all three OSes from the bootmgr menu? Right now, Server 2008 and XP are in logical drives on an extended partition, but (I assume) I can image them onto basic partitions if necessary.

  Read the article

• How to give an apache user read/write permissions?

  - by Amy

  How can I give another user on the server the same read/write access permissions just like when I am logged in as root?

  Read the article

< Previous Page | 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295  | Next Page >