Search Results

Search found 1657 results on 67 pages for 'synetech inc'.

Page 1/67 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • wireless LAN soft blocked on Ubuntu 13.10

    - by iacopo
    I've troubles with bluetooth and with lan. When I digit: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no When I digit: lspci -v 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Flags: bus master, 66MHz, medium devsel, latency 0 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at f000 [size=256] Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: radeon 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at feb48000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: xhci_hcd 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Advanced Micro Devices, Inc. [AMD] Device 7800 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 45 I/O ports at f190 [size=8] I/O ports at f180 [size=4] I/O ports at f170 [size=8] I/O ports at f160 [size=4] I/O ports at f150 [size=16] Memory at feb50000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4f000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4c000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller Flags: 66MHz, medium devsel Kernel driver in use: piix4_smbus 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f100 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (prog-if 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller Flags: bus master, 66MHz, medium devsel, latency 39, IRQ 16 Memory at feb4a000 (64-bit, non-prefetchable) [size=256] Kernel driver in use: sdhci-pci 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Capabilities: Kernel driver in use: pcieport 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-feafffff Capabilities: Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 Flags: fast devsel 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 Flags: fast devsel Capabilities: Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 Flags: fast devsel 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 Flags: fast devsel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Subsystem: PC Partner Limited / Sapphire Technology Device 0123 Flags: bus master, fast devsel, latency 0, IRQ 46 I/O ports at e000 [size=256] Memory at d0004000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: AzureWave Device 2b87 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at fea40000 (32-bit, non-prefetchable) [size=64K] Memory at fea30000 (32-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: rt2800pci 03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: AzureWave Device 2787 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fea20000 (32-bit, non-prefetchable) [size=64K] Memory at fea10000 (32-bit, non-prefetchable) [size=64K] Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fea00000 [disabled] [size=64K] Capabilities: Thank you for all the help

    Read the article

  • WebCenter Customer Spotlight: Textron Inc.

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryTextron Inc. is one of the world's best known multi-industry companies and is a pioneer of the diversified business model. Founded in 1923, it has grown into a network of businesses—including Bell Helicopter, E-Z-GO, Cessna, and Jacobsen—with facilities and a presence in 25 countries, serving a diverse and global customer base. Textron is ranked 236th on the Fortune 500 list of the largest US companies. Textron needed a Web experience management solution to centralize control, minimize costs, and enable more efficient operations. Specifically, the company wanted to take IT out of the picture as much as possible, enabling sales and marketing leads for subsidiaries to make Website updates as they deem appropriate for their business.   Textron worked with Oracle partner Element Solutions to consolidate its Website management systems onto Oracle WebCenter Sites. The implementation enables Textron’s subsidiaries to adjust more quickly to customer demands,  reduced Website management cost & time to update content on a Website while allowing to integrate its Website updates more closely with social media and mobile platforms. Company OverviewTextron Inc. is one of the world's best known multi-industry companies and is a pioneer of the diversified business model. Founded in 1923, it has grown into a network of businesses—including Bell Helicopter, E-Z-GO, Cessna, and Jacobsen—with facilities and a presence in 25 countries, serving a diverse and global customer base. Textron is ranked 236th on the Fortune 500 list of the largest US companies. Business ChallengesWith numerous subsidiaries and more than 50 public Websites, Textron needed a Web experience management solution to centralize control, minimize costs, and enable more efficient operations. Specifically, the company wanted to take IT out of the picture as much as possible, enabling sales and marketing leads for subsidiaries to make Website updates as they deem appropriate for their business.   Solution DeployedTextron worked with Oracle partner Element Solutions to consolidate its Website management systems onto Oracle WebCenter Sites. Specifically, Textron: Used Oracle WebCenter Sites to integrate Web experience management capabilities for all Textron brands, including Bell Helicopter, E-Z-GO, Cessna, and Jacobsen Developed Website templates to enable marketing and communications professionals to easily make updates to their Websites, without having to work with IT Reduced Website management costs, as it costs more for IT to coordinate Website updates as opposed to marketing and communications Enabled IT to concentrate on other activities to enhance overall operations for Textron, such as project workflows Acquired a platform that enables marketing teams to integrate their Websites with social media and mobile platforms, allowing subsidiaries to make updates and contact customers anytime and everywhere—including through tablets and smartphones Reduced the time it takes to update content on a Website, including press releases, by enabling communications professionals to make updates directly Developed more appealing visual designs for Websites to help enhance customer purchase Business ResultsThe implementation enabled Textron’s subsidiaries to adjust more quickly to customer demands and Textron’s IT staff to concentrate on other processes, such as writing code and developing new workflows, enabling them to enhance company processes. In addition, Textron can use Oracle WebCenter Sites to integrate its Website updates more closely with social media and mobile platforms, enabling marketing and communications teams to make updates anytime and everywhere. The initiative has enabled Textron to save money by freeing IT up to work on more important tasks, instituting new e-commerce and mobile initiatives to better engage customers, and by ensuring efficient Website management processes to quickly adjust to customer demands.  “We considered a number of products, but chose Oracle WebCenter Sites because it provides the best user interface. We reviewed customer references and analyst reports, and Oracle WebCenter Sites was consistently at the top of the list,” Brad Hof, Manager, Advanced Business Solutions and Web Communications, Textron Inc. Additional Information Tectron Inc. Customer Snapshot Oracle WebCenter Sites

    Read the article

  • Bunny Inc. Season 2: Optimize Your Enterprise Content

    - by kellsey.ruppel
    In a business environment largely driven by informal exchanges, digital assets and peer-to-peer interactions, turning unstructured content into an enterprise-wide resource is the key to gain organizational agility and reduce IT costs. To get their work done, business users demand a unified, consolidated and secure repository to manage the entire life cycle of content and deliver it in the proper format.At Hare Inc., finding information turns to be a daunting and error-prone task. On the contrary, at Bunny Inc., Mr. CIO knows the secret to reach the right carrot! Have a look at the third episode of the Social Bunnies Season 2 to discover how to reduce resource bottlenecks, maximize content accessibility and mitigate risk.

    Read the article

  • Bunny Inc. Season 2: Spice Up Your Applications

    - by kellsey.ruppel
    The quality and effectiveness of online services is strongly dependent on core business processes and applications. Nonetheless, user friendly composite applications are still a challenge for enterprises, especially if they are also requested to embed social technologies to empower customization and facilitate collaboration. You can operate like Hare Inc. and disappoint your customers, delivering inefficient services and wasting outside-in innovation opportunities, or you can operate like Bunny Inc., leveraging participatory services to improve connections between people, information and applications. And maybe you are ahead enough to adopt a public enterprise cloud to drive business through organic conversations and jump-start productivity with more-purposeful social networking and contextual enterprise collaboration. Don't miss this second episode of Social Bunnies Season 2 to learn how to increase the value of existing enterprise systems while augmenting employee productivity, business flexibility and organizational awareness. Still looking for more information on composite applications. We've got a ton of great resources for you to learn more!

    Read the article

  • WebCenter Customer Spotlight: Texas Industries, Inc.

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryTexas Industries, Inc. (TXI) is a leading supplier of cement, aggregate, and consumer product building materials for residential, commercial, and public works projects. TXI is based in Dallas and employs around 2,000 employees. The customer had the challenge of decentralized and manual processes for entering 180,000 vendor invoices annually.  Invoice entry was a time- and resource-intensive process that entailed significant personnel requirements. TXI implemented a centralized solution leveraging Oracle WebCenter Imaging, a smart routing solution that enables users to capture invoices electronically with Oracle WebCenter Capture and Oracle WebCenter Forms Recognition to send  the invoices through to Oracle Financials for approvals and processing.  TXI significantly lowered resource needs for payable processing,  increase productivity by 80% and reduce invoice processing cycle times by 84%—from 20 to 30 days to just 3 to 5 days, on average. Company OverviewTexas Industries, Inc. (TXI) is a leading supplier of cement, aggregate, and consumer product building materials for residential, commercial, and public works projects. With operating subsidiaries in six states, TXI is the largest producer of cement in Texas and a major producer in California. TXI is a major supplier of stone, sand, gravel, and expanded shale and clay products, and one of the largest producers of bagged cement and concrete  products in the Southwest. Business ChallengesTXI had the challenge of decentralized and manual processes for entering 180,000 vendor invoices annually.  Invoice entry was a time- and resource-intensive process that entailed significant personnel requirements. Their business objectives were: Increase the efficiency of core business processes, such as invoice processing, to support the organization’s desire to maintain its role as the Southwest’s leader in delivering high-quality, low-cost products to the construction industry Meet the audit and regulatory requirements for achieving Sarbanes-Oxley (SOX) compliance Streamline entry of 180,000 invoices annually to accelerate processing, reduce errors, cut invoice storage and routing costs, and increase visibility into payables liabilities Solution DeployedTXI replaced a resource-intensive, paper-based, decentralized process for invoice entry with a centralized solution leveraging Oracle WebCenter Imaging 11g. They worked with the Oracle Partner Keste LLC to develop a smart routing solution that enables users to capture invoices electronically with Oracle WebCenter Capture and then uses Oracle WebCenter Forms Recognition and the Oracle WebCenter Imaging workflow to send the invoices through to Oracle Financials for approvals and processing. Business Results Significantly lowered resource needs for payable processing through centralization and improved efficiency  Enabled the company to process invoices faster and pay bills earlier, allowing it to take advantage of additional vendor discounts Tracked to increase productivity by 80% and reduce invoice processing cycle times by 84%—from 20 to 30 days to just 3 to 5 days, on average Achieved a 25% reduction in paper invoice storage costs now that invoices are captured digitally, and enabled a 50% reduction in shipping costs, as the company no longer has to send paper invoices between headquarters and production facilities for approvals “Entering and manually processing more than 180,000 vendor invoices annually was time and labor intensive. With Oracle Imaging and Process Management, we have automated and centralized invoice entry and processing at our corporate office, improving productivity by 80% and reducing invoice processing cycle times by 84%—a very important efficiency gain.” Terry Marshall, Vice President of Information Services, Texas Industries, Inc. Additional Information TXI Customer Snapshot Oracle WebCenter Content Oracle WebCenter Capture Oracle WebCenter Forms Recognition

    Read the article

  • Realtek RTL8111/8168B wired network doesn't work anymore

    - by Radar4002
    This sounds like it's a common problem upgrading 11.04, but I am having trouble finding a common solution, and one that will work for me. I just applied updates via the update manager and now my wired network connection is down. I know Ubuntu network settings is the issue, because I have a dual-boot with Win 7 and my network/internet is fine on Win 7. I don't know too much about networking, so what can I do to trouble shoot this issue? I can choose an older grub version, 2.6.38-8 instead of 2.6.38-11 and this does not resolve the issue. Here is my lspci result: 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) 00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) Here is my sudo lshw -class network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 03 serial: 6c:f0:49:e7:72:e8 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:9e00(size=256) memory:fceff000-fcefffff memory:fcef8000-fcefbfff memory:fce00000-fce1ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth1 version: 03 serial: 6c:f0:49:e7:72:ea size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:8e00(size=256) memory:fddff000-fddfffff memory:fddf8000-fddfbfff memory:fdd00000-fdd1ffff

    Read the article

  • How to get my laptop to detect SD cards inserted into its built-in card reader?

    - by Candelight
    My laptop has a built-in SD Card reader but it cannot detect one when inserted. Here is the result when I type lspci from the terminal: 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 05:09.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g

    Read the article

  • Hide *.inc.php from website visitors

    - by Ghostrider
    I have a script myscript.inc.php which handles all urls that look like /script-blah I accomplish this by using following .htaccess RewriteEngine On RewriteRule ^script-(.*)$ myscript.inc.php?s=$1 [QSA,L] However users could also access it this way by typing /myscript.inc.php?s=blah I would like to prevent that. I tried <Files ~ "\.inc\.php$"> Order deny,allow Deny from all </Files> and RewriteCond %{REQUEST_URI} \.inc\.php RewriteRule .* - [F,L,NS] They both prevent users from viewing /myscript.inc.php?s=blah but they also cause /script-blah to return 403... Is there a way to do this correctly?

    Read the article

  • BREAKING NEWS: Bunny Inc. becomes a Social Enterprise

    - by kellsey.ruppel(at)oracle.com
    Bunny what? Is your business adaptive, agile, innovative, productive… profitable? No? Wondering how to make it so?Social Enterprise is gaining ground as a global trend to accelerate business performance by better engaging employees, partners and customers.Starting with this post we are looking forward to stimulate an open conversation on the benefits, the stumbling blocks and the best practices of the Enterprise 2.0 journey… but with a bunny smile!Is Social Enterprise revolutionary or evolutionary? How does it impact traditional systems (such as ERP, CRM, BPM, Portals)? How do you measure it? How do you avoid major mistakes?We want to share our vision and to hear from you. Tell us what you did, what you are going to do and what you would never do with social and ... start looking for the invasion of the #e20bunnies at #webcenterJoin the discussion on LinkedIn! And follow the conversation on Twitter!Technorati Tags: UXP, collaboration, enterprise 2.0, modern user experience, oracle, portals, webcenter, e20bunnies

    Read the article

  • BREAKING NEWS: Bunny Inc. becomes a Social Enterprise

    - by kellsey.ruppel(at)oracle.com
    Bunny what? Is your business adaptive, agile, innovative, productive… profitable? No? Wondering how to make it so?Social Enterprise is gaining ground as a global trend to accelerate business performance by better engaging employees, partners and customers.Starting with this post we are looking forward to stimulate an open conversation on the benefits, the stumbling blocks and the best practices of the Enterprise 2.0 journey… but with a bunny smile!Is Social Enterprise revolutionary or evolutionary? How does it impact traditional systems (such as ERP, CRM, BPM, Portals)? How do you measure it? How do you avoid major mistakes?We want to share our vision and to hear from you. Tell us what you did, what you are going to do and what you would never do with social and ... start looking for the invasion of the #e20bunnies at #webcenterJoin the discussion on LinkedIn! And follow the conversation on Twitter!

    Read the article

  • BREAKING NEWS: Bunny Inc. becomes a Social Enterprise

    - by kellsey.ruppel(at)oracle.com
    Bunny what? Is your business adaptive, agile, innovative, productive… profitable? No? Wondering how to make it so?Social Enterprise is gaining ground as a global trend to accelerate business performance by better engaging employees, partners and customers.Starting with this post we are looking forward to stimulate an open conversation on the benefits, the stumbling blocks and the best practices of the Enterprise 2.0 journey… but with a bunny smile!Is Social Enterprise revolutionary or evolutionary? How does it impact traditional systems (such as ERP, CRM, BPM, Portals)? How do you measure it? How do you avoid major mistakes?We want to share our vision and to hear from you. Tell us what you did, what you are going to do and what you would never do with social and ... start looking for the invasion of the #e20bunnies at #webcenterJoin the discussion on LinkedIn! And follow the conversation on Twitter!

    Read the article

  • SAS V9.1.3 - Error when combining %INC and CALL EXECUTE

    - by Mark
    Hi, I am getting a resolution error with some SAS v9.1.3 code. Here is some code I want to store in a .txt file (called problem2.txt) and bring into SAS with a %INC %macro email020; %if &email = 1 %then %do; %put THIS RESOLVED AT 1; %end; %else %if &email = 2 %then %do; %put THIS RESOVLED AT 2; %end; %put _user_; %mend email020; %email020; Then this is the main code: filename problem2 'C:\Documents and Settings\Mark\My Documents\problem2.txt'; %macro report1; %let email = 1; %inc problem2; %mend report1; %macro report2 (inc); %let email = 2; %inc problem2; %mend report2; data test; run = 'YES'; run; data _null_; set test; call execute("%report1"); call execute("%report2"); run; The log shows: NOTE: CALL EXECUTE generated line. 1 + %inc problem2; MLOGIC(EMAIL020): Beginning execution. WARNING: Apparent symbolic reference EMAIL not resolved. ERROR: A character operand was found in the %EVAL function or %IF condition where a numeric operand is required. The condition was: &email = 1 ERROR: The macro EMAIL020 will stop executing. MLOGIC(EMAIL020): Ending execution. So the question is why does CALL EXECUTE generate %inc problem2 rather than %report1, causing SAS to miss the assignment and what can I do about it?

    Read the article

  • Wireless not detected on an hp Pavilion g6 - RT5390PCIe

    - by Earl Larson
    I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

    Read the article

  • Wireless not detected on an hp Pavilion g6

    - by Earl Larson
    I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

    Read the article

  • Can't locate RRDs.pm in @INC

    - by User4283
    Hi, If i run any of my perl script without "use lib qw( /opt/rrdtool-1.4.4/lib/perl );" after perl interpreter. I've to face the following error. Can't locate RRDs.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) Its hard for me to use: "use lib qw( /opt/rrdtool-1.4.4/lib/perl );" in all of my scripts because there are hundreds of scripts. Can anyone help to resolve this....?

    Read the article

  • Perl cgi @INC different in shell and in http request

    - by pistacchio
    Hi to all, I have the follwing, simplest per cgi script: use strict; use warnings; use CGI(); use CGI::Carp qw(fatalsToBrowser); use Template; print CGI::header(); foreach(@INC) { print "$_\n"; } When called (http://[..]/cgi-bin/p.cgi) I am given the following error: Can't locate Template.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at /home/pistacchio/webapps/htdocs/cgi-bin/p.cgi line 8. BEGIN failed--compilation aborted at /home/pistacchio/webapps/htdocs/cgi-bin/p.cgi line 8. I made sure that Template is installed and indeed when running this program from shell it works (loads Template) and outputs: Content-Type: text/html; charset=ISO-8859-1 /home/pistacchio/lib/perl5 /home/pistacchio/lib/perl5/lib/i386-linux-thread-multi /home/pistacchio/lib/perl5/lib /home/pistacchio/lib/perl5/lib/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 Template is installed in /home/pistacchio/lib/perl5/lib/i386-linux-thread-multi [pistacchio@web118 i386-linux-thread-multi]$ pwd /home/pistacchio/lib/perl5/lib/i386-linux-thread-multi [pistacchio@web118 i386-linux-thread-multi]$ ls auto perllocal.pod Template Template.pm This directory is correctly listed in env and, as previously posted, in @INC. In @INC it is shown twice, so I even tried to pop it out before calling use Template, but without result. From env: [pistacchio@web118 i386-linux-thread-multi]$ env [..] PERL5LIB=/home/pistacchio/lib/perl5:/home/pistacchio/lib/perl5/lib:/home/pistacchio/lib/perl5/lib/i386-linux-thread-multi [..] Removing use Template gets rid of the problem. Can anybody help?

    Read the article

  • Using .inc files when theming.

    - by Nick Lowman
    Hi there, I noticed in the Zen theme there were various PHP files with the .inc file extension .i.e. template.conditional-styles.inc. I've read/watched quite a few theming tutorials but none of them mentioned these files for theming, only the template.php. Can anyone tell me when, if and how I should be using these files for theming. Many thanks

    Read the article

  • Login error in phpMyAdmin, problem setting auth_type in config.inc.php

    - by sergiom
    I'm having a problem accessing phpMyAdmin. A few weeks ago I did succeed configuring it for auth_type = 'cookie', but I still receive an error stating that I should have to set blowfish_secret. That was strange because it was set. So I changed auth_type from cookie to http, but it didn't work. I changed it back to cookie, but it doesn't work anymore. this is the error. phpMyAdmin - Error Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly. this is my C:\wamp\apps\phpmyadmin3.2.0.1\config.inc.php <?php /* Servers configuration */ $i = 0; /* Server: localhost [1] */ $i++; $cfg['Servers'][$i]['verbose'] = 'localhost'; $cfg['Servers'][$i]['host'] = 'localhost'; $cfg['Servers'][$i]['port'] = ''; $cfg['Servers'][$i]['socket'] = ''; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['extension'] = 'mysqli'; $cfg['Servers'][$i]['auth_type'] = 'cookie'; $cfg['Servers'][$i]['user'] = ''; $cfg['Servers'][$i]['password'] = ''; $cfg['Servers'][$i]['AllowNoPassword'] = false; $cfg['Servers'][$i]['blowfish_secret'] = 'this is my passphrase'; /* End of servers configuration */ $cfg['DefaultLang'] = 'en-utf-8'; $cfg['ServerDefault'] = 1; $cfg['UploadDir'] = ''; $cfg['SaveDir'] = ''; ?> I changed the blowfish_secret, since I don't remember the old one, and I deleted the cookies in my browser and restartd all wamp services and the browser. After I enter username and password in the login page I get the error. I've tried searching into the log files, but I'm a newbie and I'm not sure I've searched the right ones. I'm using Wamp server 2.0 that has Apache Version : 2.2.11 PHP Version : 5.3.0 MySQL Version : 5.1.36 phpmyadmin : 3.2.0.1

    Read the article

  • Ubuntu, No wireless networks found after correctly installed madwifi

    - by Peter
    Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

    Read the article

  • When is a subroutine reference in @INC called?

    - by gvkv
    As the title says, I'm not clear on when such a subroutine will be called. From the require page at perldoc one can write: push @INC, \&my_sub; sub my_sub { my ($coderef, $filename) = @_; # $coderef is \&my_sub ... } but where does this go exactly? The required package or the requiring script (or package)? I've tried both with some sentinel print statements but neither worked so clearly there is something I'm not getting.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >