Search Results

Search found 4186 results on 168 pages for 'ember router'.

Page 129/168 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

• Computer sending data while turned of

  - by Nicklas Ansman

  I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas

  Read the article

• Instructions to setup domain controller

  - by Robert Koritnik

  Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a network adapter to linksys and a virtual adapter to DC DC machine has two network adapters: one to linksys (to be inetrnet connected) and one to host (my dev Win7 machine)

  Read the article

• Windows 8 doesn't automatically join Wi-Fi network if Ethernet connection is active

  - by Herb Caudill

  In Windows 7, my laptop would automatically join both an Ethernet network and the Wi-Fi network in my house (both going through the same router). In Windows 8, if the Ethernet connection is present, it doesn't join the Wi-Fi network at all. The reason I noticed this is that if Wi-Fi isn't active, I don't see my AirPlay speakers. My wireless printer is also unavailable until I manually connect to Wi-Fi. To recap: When I turn on my computer and it's connected to Ethernet, this is what my Network Connections control panel looks like: After I manually join my Wi-Fi network, it looks like this: I would prefer for it to join both networks automatically on startup, the way it did in Windows 7. Is there a way to make this happen?

  Read the article

• Ubuntu (11.10) fails to connect to wireless network

  - by Tal Galili

  I just installed ubuntu 11.10, and tried to have it connect to the internet. I use a wireless USB stick by edimax (it is called IEEE802.11b/g/n nano USB adapter or also EW-7811Un). My problem is that Ubuntu seems to be able to use the USB to see the networks around me, but when I try to connect to my network - it just keeps trying and failing. I am connected to the internet through a 300M Wireless N Router Model No. TL-WR841N / TL-WR841ND Can you please advise on how this can be resolved? Thanks!

  Read the article

• NAT Error Message - Usage limit exceeded

  - by Kato

  Trying to configure a port to use for Vuze. Using the NAT/server port test, I was getting a message saying the connection timed out, the port was probably closed. I went back and made sure to open the specific port on my router, firewall, etc, but now I'm getting "NAT Error - Usage limit exceeded (173.32.41.24:0). I'm on a mac pro running leopard, trial versions of intego netbarrier and virusbarrier. Network utilities and netbarrier both claim the port is open. I've tested a bunch of other ports, but all give the same message.

  Read the article

• how can i realize a video-wall on 3-9pc with vlc

  - by Luca

  hello! i have to create a videowall, from 3 to 9 monitor. every monitor as a pc. actually, i stream from a server 9 movies with different istances of VLC, but i could also play on every machine the relative video with a single player. there's no problem. the real problem is that i really dont know how to sync the videos on a LAN...unfortunately there is a NETSYNC module inside VLC wich is NOT working. here are some info about my setup: videowall from 3 to 9 monitor || from 3 to 9 pc, all with the same configuration || a gigabit router+switch for the "dedicated" LAN im really stuck in this situation, if anyone has an idea or just a completely different solution, please, share it with me! thanks a lot in advance! :)

  Read the article

• TheGreenBow VPN with Cisco 2811 config

  - by Fujishiro

  Okay. Im using the feared x64 Win7 retail. I tried soooo many clients/methods, but none of them worked. Finally after a long battle, I made TGB working. YAY! I only have problems with the configuration. What data I've got? group auth user+pw;3DES enc(saw it from the router cfg);user+password. And that's all. I tried using the TGB provided manual and the howtos on their site, but there is no instruction for the given model, and the other cisco type conf wont work.) I tried to configure it up, but its not that easy.. as I mentioned aldy. If anyone uses this app or knows how to configure it up... please..help me.

  Read the article

• VoIP on Netgear DGN 2000 and Lynksys PAP2

  - by David Brown

  I have a VoIP service running perfectly for outgoing calls but I cannot receive incoming calls. I have a Netgear DGN 2000 modem router on 192.168.0.1 and a Lynksys Phone Adapter PAP2 on 192.168.0.2. I have created 3 new custom services: Service Table Service Name Ports tlenfon(TCP) 5060 tlenfon2(UDP) 15000 tlenfon3(UDP) 35000 I have reserved the address 192.168.0.2 for the PAP 2 I have forwarded the ports for each service to the PAP2 Service Name Action LAN Server IP address WAN Users Log tlenfon ALLOW always 192.168.0.2 Any Always tlenfon2 ALLOW always 192.168.0.2 Any Always tlenfon3 ALLOW always 192.168.0.2 Any Always I have checked the Default DMZ and specified 192.168.0.2 What have I missed?

  Read the article

• Subdomain only accessible from one computer

  - by Edan Maor

  I recently added a wildcard A record to my domain (*.root.com), mapping it to a certain elastic ip on AWS. I've configured apache to redirect all references to something.root.com to root.com, except for one specific "dev" subdomain, which is hosting its own site (a Django app, specifically). The Problem: This setup works perfectly for me on my computer. But on other computers around the office, it doesn't seem to work. Specifically, trying to visit dev.root.com gives an "unable to find server" error. Pinging dev.root.com gives a "cannot resolve hostname" error. The weird thing: pinging any other subdomain of root.com does work, from all machines. I would think this was all due to DNS propagation, except all the computers are behind the same office router, so how could that be the case? Any ideas?

  Read the article

• block access to wrt from vlan using iptables dd-wrt

  - by NitroxDM

  I set up multiple isolated vlans in dd-wrt. Now I need to forward a port to vlan2. I isolated the vlans using: iptables -I FORWARD -i br0 -o vlan2 -j DROP iptables -I FORWARD -i br0 -o vlan3 -j DROP iptables -I FORWARD -i br0 -o vlan4 -j DROP Now I need to block a clients on each vlan from accessing the router. This doesn't work: iptables -I INPUT -i br0 -o vlan2 --dport telnet -j REJECT --reject-with tcp-reset I'm new it iptables... am I missing something?

  Read the article

• Cannot access internet or remote network after connecting to Windows VPN

  - by Kiewic

  I set up a VPN by creating an incoming VPN connection (VPN server) in my Windows 8 machine at home (not a Windows Server). I forwarded the PPTP port in my router (port 1723) to this machine and enabled PPTP passthrough. In a second Windows 8 machine out of home, I created an outgoing VPN connection (VPN client). And I am able to connect to my home VPN, but I don't have access to any home resource or even internet. This is the output of the client ipconfig: And this are the settings of my VPN server: UPDATE: My VPN server has assigned the 192.168.1.144 IP adress at my home network. So, I tried setting the "IP address assignment" range from 192.168.1.150 to 192.168.1.200. And when a VPN client gets connected, it gets an address in that range, but it doesn't make any difference.

  Read the article

• SSL Certificate for local web server

  - by Firefly

  Is it at all possible to create a self-signed certificate for use on multiple machines on a local network which would stop the browser complaining it is not a trusted site? We have a product which is basically a computer running lighttpd to serve a web interface for configuring the computer (sort of how a router has a web interface). There can also be many of these machines running on the same network with dynamic IP's. What I basically want to do is enable SSL for extra security but I don't want people who are on the local network to be given a browser warning about the certificate not being trusted. Is this at all possible?

  Read the article

• How to share my localhost over the internet?

  - by Loolooii

  I really want to share my localhost over the internet to show my friends the progress of the website we're working on, so that I don't need to upload it to the public server each time I make a change. showoff.io is not free and localtunnel gives me "failed to authenticate" when trying to upload my public key (a lot of people seem to have this problem and there doesn't seem to be a solution for this). Does anyone know any other free service I can use or any other solution at all? I'm using a Mac. Thanks. UPDATE: with localhost I mean a web server running on my computer, I have a dynamic IP address and no I'm not behind a router (just using a wireless modem).

  Read the article

• After installing Windows what should I do first? update or install antivirus?

  - by EApubs

  Normally, after reformating and installing Windows 7, I used to go online and install all the updates, install all the driver updates and then install the anti virus. Because long ago, when I installed the anti virus first, applying windows updates crashed the AV! So, I install it last. Specially 7 sp1 is critical right? But now im having doubts... Going online without an antivirus means I'm vulnerable! (I have a home router which have a small firewall but I'm not sure about it) So, whats the best thing to do? Install the anti virus first or install the updates first?

  Read the article

• Routing Traffic on Ubuntu to give Raspberry PI Internet Access

  - by Scruffers

  I'm hoping someone can point me in the right direction for setting up my Linux (Ubuntu 12.04) box to route traffic from eth0 to wlan0. I'll try and explain the problem I am trying to solve: I currently have two separate networks: [RaspberryPi/eth0] 192.168.2.2 / 255.255.255.0 ^ | v [Ubuntu/eth0] 192.168.2.1 / 255.255.255.0 And: [Ubuntu/wlan0] 192.168.1.100 / 255.255.255.0 ^ | v [ADSL router] 192.168.1.1 / 255.255.255.0 So currently if I want to access the RaspberryPI I can SSH from the Ubuntu box to the PI. And if I want to use the Internet, I have full access from the Ubuntu box, but nothing from the RaspberryPI - the two networks are partitioned. What I would like to do is configure things so that the RaspberryPI has Internet access via the Ubuntu box and out to the Internet. I tried to create a bridge, but got the message "wlan0: operation not supported" (wireless chipset is Ralink RT3062). I'm sure giving the Raspberry PI Internet access should be easy to do in this configuration, but I am a bit lost - can someone point me in the right direction please?

  Read the article

• Unable to FTP, any ideas?

  - by Nick

  I'm using Windows Server 2003. I have the FTP services installed, router set to DMZ, and currently Anonymous logins allowed. (I know, security risk, but there's nothing important on there and not worried at the moment) So here's the thing... I can ftp to my computer, list directory, get files etc, BUT only if I'm using the command prompt. If I try to log in using IE or any FTP client it's just timing out. I've tried: username@ipaddress ipaddress username:password@ipaddress and not able to get any of them to work. Anyone have any ideas? Thanks!!!

  Read the article

• Is there a way to make scp run faster on a Mac OS X?

  - by paul_sns

  I'm trying to a upload a Flex generated SWF file from my Macbook (running Snow Leopard) using the command scp main.swf server.com:/ I had setup key authentication to prevent typing the user/pass every time. This process normally takes up to two minutes using my connection at home (768kbps down/300+ kbps up). The interesting part is that when I use WinSCP in my Windows XP machine, the process only takes 30 seconds max. Both my MacBook and Windows XP machine use the same internet connection. The MacBook is connected to the router via cable (which should be faster right?) while the Windows XP connects through Wifi. Let me know if you need additional information in order to diagnose the problem. Thanks!

  Read the article

• Virtualizing Firewalls/UTM

  - by TheD

  So Sophos UTM (Astaro Gateway UTM) can be virtualized in Hyper-V, VMWare, vSphere etc. Now I'm new to virtualization, so am wondering how the networking would be configured in this situation. Imagine the following (a very simple setup). A Zyxel router acting as the default gateway, standard ADSL line. This is connected directly via Ethernet to my VHost, Hyper-V in my case. Now I assume I need two virtual network adapters, one which is the "External" interface to the firewall, and the other being the "Internal" interface. But where does my switch go, since I have 5 machines (or X number of machines). Where is the switch connected, to the internal interface on the VHost? What default gateway do my clients use etc? How would the routing work if these two interfaces weren't bridged since they are virtual networks anyway. I'm a little confused! Any advice is much appreciated! Cheers

  Read the article

• Cisco access list logging. Why is there a difference between IPv4 and IPv6?

  - by growse

  I've got a Cisco 877 router. I've got an IPv4 access list and an IPv6 access list set up and configured similar to this: interface Dialer1 ... ip access-group INTERET-IN ipv6 traffic-filter IPV6-IN Each of these access lists has a final rule of deny ip/ipv6 any any log. However, in my syslog I notice that there's a difference in formatting between the two types of entries. IPv4 will say: %SEC-6-IPACCESSLOGP: list INTERNET-IN denied udp 88.89.209.63(137) -> 1.2.3.4(137), 1 packet Whereas the IPv6 list will say %IPV6_ACL-6-ACCESSLOGNP: list IPV6-IN/240 denied 59 2001:0:5EF5:79FD:14F9:B773:3EBA:3EE3 (Dialer1) -> 2001:800:1000:0::1, 8 packets Both have broadly the same information, but the IPv6 log entry is missing the protocol type and port, both of which are very useful if I'm trying to troubleshoot connectivity. Why is this? How do I get IPv6 deny logs to display the protocol and port used, if any?

  Read the article

• why this routing configuration does not work?

  - by avs099

  I have 2 VMs in HyperV role: first is RRAS - it has 2 interfaces (both manually configured, no DHCP): 192.168.1.110 - "external" one, connected to the router 192.168.10.2 - that's internal interface which other VMs will be using as well also I added VPN connection to our main server - and it gets 192.168.2.136 IP address in 192.168.2.XXX network. And IP route is create on the server as well for this interface. second VM is called KITCHENER. It only has 1 interface 192.168.10.99 / 255.255.255.0, with default gateway set to RRAS server - 192.168.10.2 QUESTION: how can I ping "main server" - 192.168.2.1 - from the KITCHENER server when RRAS server is connected to VPN? please see screenshots with ipconfig /all, route print and ping 192.168.2.1 commands. What needs to be done to get this working? all servers are Windows 2008 R2 if that matters.

  Read the article

• Ubuntu server loses network connection after ADSL2+ modem reset

  - by squashbuff

  I am using an ubuntu 10.04 server (running on a Lenovo Thinkpad notebook) as my webserver. It is performing well in terms of handling the traffic etc. However my internet connection is ADSL2+ (using Thomson TG782T modem-router) and if the modem is reset, then my server loses network connection. The networkmanager icon shows a red exclamation mark showing that is has no connection. But as soon as I click on it and tell it to connect to eth0, the connection is back on. It must be something that networkmanager is failing to do and because of this, the reliability of my webserver is suffering. Any advice on how this can be fixed?

  Read the article

• Cisco ASA - NAT'ing VPN traffic

  - by DrStalker

  I have an IPsec VPN setup like this: [Remote users]-[Remote ASA] <-VPN-> [My ASA]-[Subnet A]-[Router 2]-[Subnet B] The VPN is set to handle traffic between [remote users] and [Subnet A]; it does not include [Subnet B]. Pretend the firewall rules for all routers are to permit everything. Now I want to redirect traffic that comes over the VPN to a specific IP on [subnet A] (192.168.1.102) to an IP on [Subnet B] (10.1.1.133) If I add a rule on [My ASA] to NAT traffic to original IP 192.168.1.102 to new IP 10.1.1.133, 1) Will this affect the connections coming in over the VPN? (ie: the VPN packets are unencrypted and then NAT is applied) 2) Will this work when the post-NAT target is on Subnet-B, which is not part of the VPN traffic selection?

  Read the article

• What is the right way to use Internet Sharing in OS X?

  - by Bob King

  For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

  Read the article

• What is the best solution for letting both Macs and PCs access digital images and videos on a networ

  - by Gertbert

  I'm looking for a simple way to share digital images and videos over a network to both Macs and PCs. I'm currently looking into three options: NAS, WD MyBook Mirror drives attached to a router, or an HP WHS product like the Data Vault. I'm looking for something easy to implement that allows for drive mirroring but also has good performance for both Macs and PCS. I've read that the HP WHS devices rebalance on their own schedules, making them useless for streaming video, and hope someone can definitively confirm or deny this as it's a dealbreaker if true. Any other suggestions are appreciated. Thanks!

  Read the article

• Changing Internet connection on ISA Server 2000

  - by garyb32234234

  Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

  Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >