Search Results

Search found 92188 results on 3688 pages for 'advanced user'.

Page 1291/3688 | < Previous Page | 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298  | Next Page >

  • Editing multiple TODO simultaneously -- priority and/or deadine

    - by lawlist
    Can anyone please steer me in the right direction to a function that will edit multiple TODO in one fell swoop. Here are some examples: highlight a group of TODO that have deadlines and remove the dealines to make them undated. modify all priorites in a highlighted group -- e.g., #A to #D set deadlines by group and/or change deadlines by group -- e.g., move everything to a specific date, or set a specific date for each if they were undated.

    Read the article

  • HP DL380 using HP NC522SFP NIC shows supported link modes: not reported

    - by MikeS
    When using ethtool on this NIC, the supported link modes show "not reported". Any idea why this is the case? Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: Not reported Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 1 Transceiver: external Auto-negotiation: off Supports Wake-on: g Wake-on: g Current message level: 0x00002000 (8192) hw Link detected: yes

    Read the article

  • USB Wireless keyboards not registering Ctrl Alt Delete when computer boots

    - by Donovan
    I've recently installed a new PC at work. Its a Dell Optiplex 9010. I bought a USB wireless keyboard and mouse from Dell and subsequently from Logitech to use with this PC. The Dell keyboard is a model KM632 and the logitech is an mk260. Both units work properly and have decent range. The issue is when the PC boots they keyboard (neither model) will register a Ctrl+Alt+Delete to the PC. I can say for sure the keyboards are still functional as the media keys will still produce a result (notably the sleep key on the mk260). My gut reaction is I'm dealing with an issue in the PC or Windows. I'm not sure where to start though. If I unplug and reinsert the USB dongle both units will work. Also, I don't use both they keyboards at the same time I bought the Logitech fearing the Dell unit was bad. Any ideas would be appreciated.

    Read the article

  • Resolving loss of internet bandwidth in home network

    - by Caspar
    Recently, I've decided to connect my laptop at home to my modem/router through Ethernet cables built into my apartment. As these built-in Ethernet cables are usable via plugs built into the walls (called powerline adapters), I use some additional cabling (STP CAT6 cables) from my laptop/router to the plugs. In addition, I don't know any technical details about these built-in cables (as they're not visible), only the maximal bandwidth (1 GBit = Cat6?) that they're supporting. The built-in cables are Cat. 5e Ethernet cables. The problem is now that when I set up the connection, I cannot use the full bandwidth that my internet connection is actually offering (100 Mbit/s), only about 85 Mbit/s between 85 - 88 Mbit/s, despite the fact that all cables involved should support the maximal bandwidth. I know from other tests with one of the Ethernet cables in use that I can use almost 99 Mbit/s when I connect my laptop directly to the router/modem using only this one cable. In addition, it is very unlikely that the length of the resulting cable connection from my laptop to my router involving the built-in cables exceeds 100 m. So, what possible reasons for this loss of bandwidth exist? And how I can fix this issue? I hope this might help resolve the issue: The built-in cables appear to be Cat. 5e Ethernet cables. So, is there any problem when I connect Cat6 Ethernet cables directly to Cat5e Ethernet cables via the plugs?

    Read the article

  • Setup a vpn server with a static IP with NAT and port forwarding

    - by Lorenzo Pistone
    I have a Debian VPS with an assigned static IP. I want to setup a virtual interface (with an ip like 192.168..) on my laptop (Ubuntu, dynamic IP) linked to the remote VPS, so that if I bind sockets to it the traffic is tunneled to the VPS and sent to the Internet from there. Port forwarding must be available. This looks like a job for a VPN software, but I'm clueless about the pieces of software needed. Any advice?

    Read the article

  • Is there a performance difference between Cat5 and Cat6 keystone blocks?

    - by Scott Anderson
    I'm going to be wiring my home for ethernet soon, and I've already decided that I want to use Cat6 cable to do it (faster speeds, better performance, etc). During the installation, I'd like to add wall-plates to certain rooms in my house, and the keystone blocks look like the best option for me. My question is: I've seen different keystone blocks on many cabling websites, some say Cat5e and some say Cat6. The Cat6 ones are slightly more expensive. Is there any noticeable performance gain from using a Cat6 keystone? To me, it just seems like the keystone really wouldn't matter, since it's basically like putting an RJ-45 end on a cable. Can I buy the cheaper Cat5e keystone blocks and still have the performance that Cat6 cable will give me? Thanks!

    Read the article

  • Daisy-chainable DisplayPort Monitors

    - by thepurplepixel
    I am the proud new owner of a MacBook Pro with a mini-DisplayPort. My desk setup used to allow me to position the screen of my old MacBook beside an external monitor, essentially allowing dual-head. It was also advantageous that my old MBP and my external monitor had the same resolution, 1440x900. Now, I'm searching for a set of two monitors that I can use a HengeDock with. Unfortunately, the MacBook Pro suffers from having only one mini-DisplayPort. Looking up the spec for DisplayPort 1.2 (which the MBP supports), DisplayPort daisy chaining is supported. What I'm looking for is a monitor that has two DisplayPorts so I can daisy chain two monitors off the single mini-DisplayPort. What I don't want is a USB-based video solution. I need full acceleration on both monitors; an external video card won't cut it. I hope I don't have to wait a few years for these monitors to come out. TL;DR: I need two monitors with two DisplayPorts each that I can daisy-chain. Thanks!

    Read the article

  • Performance SAS vs SSD

    - by omoto
    When it comes to speed of development, very important thing is your hardware. I need suggestion to choice between hard drives. What is a best solution: price/value

    Read the article

  • PSU failing or Mainboard failing?

    - by Andrei Rinea
    I am having some troubles lately powering on my desktop workstation. While starting up the PC after being off for hours (usually at least 8 hours) it randomly fails to do so. What happens is that : I press the power button; nothing happens I can hear a moderate buzzing noise at the back of the PC (near the PSU); but I can't say for sure that it's not from the mainboard. If I insist pressing the power button a few times in 1-2 minutes it'll start Another route would be that instead of (3) I will plug off the power cable from the PSU and wait for 30 seconds. Then I will press the power on and keep it for 30-60 seconds (I had some success at notebooks with a similar approach). Then I will plug back the cable in the PSU, press only once the power button and it will start normally. Also while running normally I keep hearing some low buzzing which seems to be fan-RPM-related (i.e. when processing images or doing CPU intensive work). What should I look into? UPDATE It's getting worse. It took more than 10 retries today and almost 20 minutes to start the computer. I tried the paperclip trick and the PSU behaves perfectly. I managed to start the computer like so : I pressed the on-button a few times and then left the PC in a pre-startup state (the fans were working the buzzing noise was strong and I went to eat. I thought I won't lit the house on fire so fast and without smelling. Back, after 10-15 min the computer booted up! Discussed with a fellow at Intel and he told me the capacitors on the mainboard are probably a bit shot. If they are shot, he said, it should start up warm perfectly. So I did restart it, warm, a few times (5 sec cooldown and then 40 sec cooldown and it started up perfectly). I can either replace the capacitors on the mainboard (doesn't sound worth it or replace the mainboard (this one sucks too :)) ) FINAL INFO : It was the PSU after all. Although it was powering the IDEs and SATAs the Mainboard power module was failing. I bought another mainboard just to find out that this wasn't the cause. Now I'll have to return it somehow. The spare PSU is now in the computer and doing well.. Although larger (500W), it's like a plane taking off.. I need a better one.

    Read the article

  • Windows 7 boots to black screen with blinking cursor

    - by murgatroid99
    I have an Alienware M17x that dual boots into Ubuntu 11.04 and Windows 7 Home Premium. Currently, the computer starts at the GRUB loader and will boot into Ubuntu, but if I try to boot into Windows, I immediately get a black screen with a blinking cursor in the upper left corner. The output of fdisk -l is Device Boot Start End Blocks Id System /dev/dm-0p1 1 5 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/dm-0p2 6 1918 15360000 7 HPFS/NTFS Partition 2 does not start on physical sector boundary. /dev/dm-0p3 * 1918 64772 504878877+ 7 HPFS/NTFS Partition 3 does not start on physical sector boundary. /dev/dm-0p4 64772 77827 104858625 5 Extended Partition 4 does not start on physical sector boundary. /dev/dm-0p5 64772 67204 19531008 83 Linux /dev/dm-0p6 67204 74498 58593536 83 Linux /dev/dm-0p7 74498 77577 24731648 83 Linux /dev/dm-0p8 77578 77827 2000128 82 Linux swap / Solaris I have used the Windows rescue CD, and run the automatic error fixer until it finds no errors. I have run chkdsk /R on both the main Windows 7 (/dev/dm-0p3) partition and the recovery partition (/dev/dm-0p2). I set the main Windows 7 partition to be active. I also tried running in the recovery console the commands bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd None of these helped and the last set of commands deletes grub, which I then have to reinstall from Ubuntu. I think the last thing I did in windows before this started was install the newest ATI driver for my video card. This would suggest using system restore, and I actually had a restore point earlier (after the problem started), but after whatever I did that restore point does not appear in the list on the recovery disk any more, so I cannot do a system restore. Is there anything else I can try to make Windows boot properly again? Edit: Running the suggested commands bootsect /nt60 c: bcdboot c:\windows /s c: was also ineffective.

    Read the article

  • Is it possible to download extremely large files intelligently or in parts via SSH from Linux to Windows?

    - by Andrew
    I have a ~35 GB file on a remote Linux Ubuntu server. Locally, I am running Windows XP, so I am connecting to the remote Linux server using SSH (specifically, I am using a Windows program called SSH Secure Shell Client version 3.3.2). Although my broadband internet connection is quite good, my download of the large file often fails with a Connection Lost error message. I am not sure, but I think that it fails because perhaps my internet connection goes out for a second or two every several hours. Since the file is so large, downloading it may take 4.5 to 5 hours, and perhaps the internet connection goes out for a second or two during that long time. I think this because I have successfully downloaded files of this size using the same internet connection and the same SSH software on the same computer. In other words, sometimes I get lucky and the download finishes before the internet connection drops for a second. Is there any way that I can download the file in an intelligent way -- whereby the operating system or software "knows" where it left off and can resume from the last point if a break in the internet connection occurs? Perhaps it is possible to download the file in sections? Although I do not know if I can conveniently split my file into multiple files -- I think this would be very difficult, since the file is binary and is not human-readable. As it is now, if the entire ~35 GB file download doesn't finish before the break in the connection, then I have to start the download over and overwrite the ~5-20 GB chunk that was downloaded locally so far. Do you have any advice? Thanks.

    Read the article

  • How do I model teams and gameplay in this scorekeeping application?

    - by Eric Hill
    I'm writing a scorekeeping application for card game that has a few possibly-interesting constraints. The application accepts user registrations for players, then lets them check-in to a particular game (modeled as Event). After the final player registers, the app should generate teams, singles or doubles, depending on the preference of the person running the game and some validations (can't do doubles if there's an odd number checked in). There are @event.teams.count rounds in the game. To sum up: An event consists of `@event.teams.count` rounds; Teams can have 1 or more players Events have n or n/2 teams (depending on whether it's singles or doubles) Users will be members of different teams at different events Currently I have a rat's nest of associations: class User < ActiveRecord::Base has_many :teams, :through => :players has_many :events, :through => :teams class Event < ActiveRecord::Base has_many :rounds has_many :teams has_many :players, :through => :teams class Player < ActiveRecord::Base belongs_to :user belongs_to :team end class Team < ActiveRecord::Base has_many :players belongs_to :event end class Round < ActiveRecord::Base belongs_to :event belongs_to :user end The sticky part is team generation. I have basically a "start game" button that should freeze the registrations and pair up teams either singly or doubly, and render to Round#new so that the first (and subsequent) matches can be scored. Currently I'm implementing this as a check on Round#new that calls Event#generate_teams and displays the view: # Event#generate_teams def generate_teams # User has_many :events, :through => :registrations # self.doubles is a boolean denoting 2 players per team registrations.in_groups_of(self.doubles ? 2 : 1, nil).each do |side| self.teams << Player.create(self,side) end end Which doesn't work. Should there maybe be a Game model that ties everything together rather than (my current method) defining the game as an abstraction via the relationships between Events, Users, and Rounds (and Teams and Players and etc.)? My head is swimming.

    Read the article

  • Installing Windows 7 x64 SP1: Error 0x8007007b (The filename, directory name or volume label syntax is incorrect)

    - by Eikern
    I just tried to install Windows 7 x64 SP1 on my desktop computer, but 10 minutes in to the installation i get this error: The filename, directory name or volume label syntax is incorrect. ERROR_INVALID_NAME(0x8007007b) My guess is that I have to reinstall the OS, but I'm wondering if I somehow can get a more detailed error message. I want to know what has got the wrong name/path? Anybody know? EDIT: I pressed enter after selecting a tag, before I had finished the question.

    Read the article

  • Building an Email server for mass emails

    - by EGHDK
    I recently started doing IT odd jobs for a company. The company has a pretty decent sized mail list that costs them over $3000 per month to send out email from. The company is set on creating their own email server so that it can just run and send emails to the client lists. They only send out emails roughly once a month. Has anyone had experience with this? This wouldn't be an email server I guess (as it doesn't need to handle incoming messages) It just has to be able to send around 200,000 emails, once a month. What would be the best way to go about this? Services online like MailChimp have proved to be too pricey. It's not an ad that is being sent out, it's more of a monthly newsletter, so we don't need any crazy software for ROI or anything crazy like that. If I could fit 200,000 people in GMAIL, I'd do it, but I don't think I can (heh... maybe I should try).

    Read the article

  • Viewing the full Skype chat history

    - by hekevintran
    I have Skype 2.8 on Mac OS X 10.5.8. Under the the chat menu is an option called "Recent Chats". This allows me to see logs of recent chats, but not of older ones. I know the older ones are stored because they are in ~/Library/Application Support/Skype/username/chatmsg256.dbb. This file when put in a text editor has text chat information from all my previous Skype chats. It is however stored in an unknown file format that I do not know how to parse. Does Skype have a built-in log viewer (like Adium's) that I can use to access these older logs?

    Read the article

  • SSD/HDD not exceeding 120 MB/s

    - by skiwi
    SO here is the situation: First this was my old PC, it had a 2x 1TB RAID 0 and a Corsair Force 3 SSD in it. This were the old speeds, measured by HDTune Pro. 2x 1TB RAID 0: Corsair Force 3 SSD Then my dad got my PC and we had several issues, in the end turned out both RAID and SSD controller were malfunctioning causing BlueScreens on 100% load. Removed the RAID 0, but leaving the HDD's intact and bought an Samsung 840 EVO 120GB, though the Corsair SSD is still in the system, just not as sytem disk anymore. 1TB HDD (one of them): Corsair SSD: Samsung SSD: We did not assemble the PC ourselves, so answering some technical questions might be more difficult, though we will do our best. First thing we noticed is that the Samsung 840 EVO is no where reaching it's advertised speed, even an Samsung 840 250GB (non-EVO) is reaching 350 MB/s in my own PC. Then we noticed that both SSD's are capped at 120 MB/s exactly, not sure if this is being caused by HDTune Pro, but very unlikely. And even worse, the Corsair Forza 3 was running faster before the system got reassembled. Does anyone have any clue what is going on?

    Read the article

  • How to create a template with contact info in Windows Live Mail?

    - by Elliott
    Is it possible to create a template to use in Windows Live mail which I can load peoples details into from my contact list? I currently send emails to people but I have to manually view them in the address book, then copy there details into an email. What I would like is to open the template, select the email address and everything else is auto completed, such as first name, address etc. These would go in set fields which I set within the template. Is this possible? I am willing to switch to another mail account if needed but I would prefer it to be in Windows Live Mail. Thank you. :)

    Read the article

  • AMD Processors and the Windows Phone 8 Emulator

    - by Aj Patel
    I would madly appreciate it if anyone in this community would help me with my question. The background is that I want to develop Windows Phone 8 applications but both of my current computer processors do not have Hardware Virtualization & Second Level Address Translation that are needed to run the Emulator. I have my eyes on an AMD computer g7-2243us (I like it because it has 1600x900 screen res). I looked up this Link that shows that this computer's AMD processor (Next Gen AMD Quad-Core A8-4500M Accelerated 1.9GHz up to 2.8GHz 4MB L2 Cache Processor) supports AMD-V Hardware Virtualization. So, will this computer be able to run the emulator? Thank you so much for your answers. I'm pretty sure it will run the emulator, but I just want to make sure before spending $400. Thank You all So Much.

    Read the article

  • Did chkdsk make it harder to restore files?

    - by neyl
    My friend asked me to try and fix his loaded Sansa Clip + which wasn't playing. After opening it in MSC mode I discovered that the Music directory was empty and total of all files was only a few MB. However Disk properties showed me that it was 7Gb full. I then ran Tools - Error Checking and Windows dutifully informed me that disk was corrupt and I should run again Allowing Windows to Fix Errors. I did that and it told me everything was fixed and that all files were placed in FOUND.000 Dir. FOUND.000 was about 7.5 GB with FILE0000-1546 . CHK. (I am aware of methods like ChkBack to scan and convert to mp3 etc BUT Original filenames and structure needed!) Now I started getting worried that I made things worse! I have plenty of experience with Data Recovery Programs - Recuva, Restore My Files etc. and I was anyhow planning to use them to scan the drive. But NOW after CHKDSK "fixed" the drive maybe it modified critical FAT information vital for data recovery. So I run these programs and 0!!!. No trace of files! I tried a ton of Recovery Programs with same results TILL EaseUS Data Recovery Wizard found all files and I purchased program for $55! My Question In your opinion - did running CHKDSK with automatic fixing of errors make matters worse (i.e. many data recovery progs. didn't find a trace and they would have done if not for chkdsk) or was the filesystem too corrupt anyhow for regular File Recovery Progs.? If I would be a Professional - would I be responsible for running CHKDSK - automatic Fixing. Do you know of a better Data Recovery Program than EaseUs Data Recovery wizard - According to my experience I haven't found better!? Thanks

    Read the article

  • Avoiding double NAT with PPPoA connection

    - by user498429
    I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

    Read the article

  • Rotate PDF document

    - by Rogier
    We have created thousands of PDF files that are printed as a label on a special label printer. Printing these labels is ok, but some of the label paper are quarter turned and the PDF are printed incorrectly. There is a possibility to rotate the page before printing. But is it possible to rotate a PDF file and save it again as a PDF file? And there are thousands of PDF files, is it also possible to do this is a batch program?

    Read the article

< Previous Page | 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298  | Next Page >