Search Results

Search found 402 results on 17 pages for 'junk'.

Page 13/17 | < Previous Page | 9 10 11 12 13 14 15 16 17  | Next Page >

  • DLINK WBR-1310B Wireless Router seems to hang...

    - by Ira Baxter
    I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it the neighborhood computer junk store). I am using it at home (and in fact am using it this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other internet service) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Rebooting fixes it. Its brand new. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anyboyd else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK becuase a previous Linksys died of apparant heating problems). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy?

    Read the article

  • What was your biggest waste of money, and what should you have bought instead? [closed]

    - by rob
    I waste a lot of money on computer equipment and other electronics that I don't really need. I've also bought software that I've never really used, or which as been replaced by better free software. As I'm buying things, it doesn't seem like much--fifty bucks here, a hundred dollars there. But when I go back and look at how much I've spent over my past few electronics purchases, I usually start to think of the other things I could have bought with that money instead. Most of the computer hardware and electronics don't usually improve my life by much, if at all. Case in point: back when I was in college, I prided myself on getting the best deals for computer hardware, but when I went back and added up all the money I had spent, I had probably wasted close to a thousand dollars on "cheap" $100 hard drives that eventually all went bad (including the warranty replacements). Even if they did still work, it would not be worth the effort to use them, because they're too small and too noisy by today's standards. I've also spent thousands more on other junk, such as RAM and CPU upgrades that only gave modest performance jumps, and wireless audio transmitters that I used for a short time to stream music from the now-defunct Yahoo! Music service. Every time I see a really great deal on RAM or video cards, I come one click away from buying them, but these days I'm usually able to resist. I've been wanting to get into woodworking ever since I moved into my house, and five years later I'm finally saving up for a $600 table saw. Sure, I've already got a toolbox and a couple of the essential power tools like a drill and a jigsaw, but I can't help but think that I'd have an entire shop full of woodworking tools and a lot of nice wood furniture if I hadn't wasted all that money back in college. What has been your biggest waste of money on computer stuff and technology? If you had all that money back, would you make the same mistake again and buy the same types of things, or would you spend it on something else?

    Read the article

  • Microsoft Word 2007 restarts the installer upon exiting on Windows XP

    - by leeand00
    A user complained that they were having issues with MS Office 2007, and that the installation / configuration dialog kept appearing. I already tried uninstalling Office 2007 and I ended up needing to use the Microsoft Fix It package to uninstall it, since using the control panel failed. I close Microsoft Word. The Installer for Microsoft Office inexplicably opens. I then get a dialog that says I need to reboot. So I restart... Start Microsoft Word, Word starts up, and everything appears to be fine. I close word, and nothing much happens this is on the administrator account. I think everything is fixed so I call the user over to come try their account out. We login as the user, and the user tries to open a document in Word. The Configuration Progress Window reappears. It runs...and then Word appears. I close it and it appears to work, no window. I open it again and the Configuration Progress window appears yet again... Then Word opens up again, if I exit out and open up again I get the same Configuration Progress window. I have no idea what is causing the Configuration Progress Window to come up.. Update: I attempted to install two updates: Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687400) Update for the 2007 Microsoft Office System (KB967642) Both of these updates failed. Update: I attempted to install KB967642 manually and it failed.

    Read the article

  • Configure IIS to pass-through CGI output without any conditioning

    - by Daniel Watrous
    I'm building a web service on Windows 2008 R2 with IIS 7.5 and Python 2.5. Right now I have the Handler Mappings and everything else setup just fine, Except that IIS is modifying what it gets back from the CGI script before sending it along the the client. Here's an example: I wrote the following CGI script: # hello.py print "Status: 400 Bad Request" print "Content-Type: text/html" print print "Error Message" According to the HTTP spec this should be fine and a Status of 400 should allow for a description of the error message in the body of the response. When the server response actually comes back to me I get the following: Status: 400 Bad Request Date: Fri, 11 Feb 2011 17:58:30 GMT X-Powered-By: ASP.NET Connection: close Content-Length: 11 Server: Microsoft-IIS/7.5 Content-Type: text/html Bad Request I've seen on this forum and others where I can change or eliminate the X-Powered-By header element, but I would like IIS to leave it alone altogether. I'm not sure why it takes my response, deletes "Error Message" from the body and replaces it with "Bad Request" and then adds all that other junk in. Is there some way to tell IIS to just send the response along without making any changes at all?

    Read the article

  • Nvidia: force 1920x1080 as an option

    - by progo
    Proprietary Nvidia (290) on gentoo here. I'm running Nvidia TwinView with two 1680x1050 monitors here. Now I want to hotplug between HDTV and one of the monitors. Almost good, but since Nvidia reads the EDID information of the monitors and sees the maximum resolution of 1680x1050, it won't allow 1920x1080. "Detect displays" of nvidia-settings doesn't do anything. My only option this far is to restart X, but this is highly unpreferable. I already discovered that something towards my liking can be done with MetaModes, but it doesn't allow larger resolutions either. I guess I have to drop the EDID information and specify modes manually. However, TwinView hasn't liked my offerings thus far. Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection # inputdevice junk removed; it's overridden anyway Section "Monitor" Identifier "CRT-0" ModelName "Acer P221W" HorizSync 31-84 VertRefresh 56-77 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 7600 GS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "MetaModes" "CRT: 1680x1050 +1680+0, DFP: 1680x1050 +0+0; CRT: 1680x1050 +0+0, DFP: 1920x1080 +1680+0" #Option "UseEdid" "false" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Is there a list of Windows services that can be turned off to save resources?

    - by scunliffe
    Every time I open up my task manager and look at the tasks running, it appears to me that there has got to be a bunch of junk running in there that I don't want or need and would be better off turning off (e.g. set the service to manual vs. automatic) In particular I'm running Windows XP, but I'd be interested in services for any version. e.g. Service: ThinkPad PM Service What is it: The ibmpmsvc.exe process is installed by default on IBM Notebook computers. It allows various functions of your IBM notebook to be controlled using the blue Fn keys. If you use the blue Fn keys on your Notebook, you should leave this process running. Otherwise, if it is causing problems for your system you should terminate the ibmpmsvc.exe process. (source) Thus for me, (having never used, or intending to use these buttons) - I want to turn it off. There's lots that just seem painfully unnecessary to me... I'm just not sure which ones I can "safely" stop/disable without issues... "Alerter", "ClipBook", "Messenger", "Telnet", "ATI Hotkey Poller", "Office Source Engine", etc. I'd appreciate any info on services that are truly unnecessary, or only useful to certain people/types of users.

    Read the article

  • CMD/ADB - Autorun script to search, copy, and paste a file from android system to flash drive

    - by Outride
    I've looked around and can't find anything that answers my question. This is my first question, so any tips or thoughts are welcome, as well as an answer :p As explained in title, i want to create a script that launches, finds a file on android phone, copies it, and pastes it to a flash drive. As of right now, it's a mix of multiple tutorials, trial and error, and I'm at a point of giving up. As of right now, I have a flash drive, loaded with three scripts. As follows: Bold = name of file file.bat @echo off :: variables /min SET odrive=%odrive:~0,2% set backupcmd=xcopy /s /c /d /e /h /i /r /y echo off %backupcmd% "C:\Users\Outride\Desktop\kikDatabase.db" "%drive%\all" @echo off cls invisible.vbs CreateObject("Wscript.Shell").Run """" & WScript.Arguments(0) & """", 0, False launch.bat wscript.exe \invisible.vbs file.bat So far, I had to use android commander, manually go through the directory, find /data/data/kik.android/databases and then copy kikDatabase.db to my desktop. Then run this scrip. Yes i'm trying to pull the database to copy all my email contacts. I use launch.bat, which then makes file.bat invisible due to the invisible.vbs script. What would i need to do now to have the file searched for and copied to the flashdrive? Thanks in advance, i'll be glad to answer any questions if theres any :p just remember that i'm not exactly a tech expert haha EDIT* Cleared junk of prior edits. New - I now have a .bat script to recognize what drive the usb is on, and launch py_cmd (adb shell) This is the current script. pull.bat @echo off :: variables SET odrive=%odrive:~0,2% set launching=start "%drive%\Minimal ADB and Fastboot\py_cmd" echo off %launching% so how could I make it for the .bat or a new script, to type the following "adb pull /data/data/kik.android/databases/ %drive%\All\Database" into the adb terminal? please help! I've been racking my brain over this all night :3

    Read the article

  • Gigabit LAN not working on ASUS M2N-MX

    - by chmod
    Today I replace my FastEthernet switch with a newly bought gigabit switch (DGS-1008A). All computers in my house are displaying that the connection speed is 1 Gbps except for one. The computer that is not working is an ASUS M2N-MX which contain an onboard gigabit NIC. See ASUS link for confirmation http://www.asus.com/Motherboards/AMD_AM2/M2NMX/ Here are some info of the machine OS: Windows 7 Ultimate SP1 64bit BIOS version: 1004 (latest) Driver: installed via Windows update (latest from Windows update) Windows Update: fully updated The machine is reformatted 3 days ago, so it's pretty clean, no junk, no virus, etc Cable: Amp CAT5E 5 meters In device manager, the name of the NIC is "NVIDIA nForce 10/100/1000 Mbps Ethernet" What I have try: I did try to install the driver provided in ASUS website, but there isn't any for Windows 7 64 or Vista 64. I did try to install the latest nForce340/6100, downloaded from Nvidia website. However, the LAN driver refuse to install, it complain that I already have the best driver installed. I looking in the property -- advance tab -- Speed/duplex settings, in an attempt to force it to run at 1000Mbps, but there is no 1000Mbps choice, only 10 and 100Mpbs. I change the CAT5E cable (use one from another computer that is running gigabit without problem) Anyone have this issue or know how to solve it? Thanks

    Read the article

  • How do I stop linux from trying to mount android phone as usb storage?

    - by user1160711
    When I plug in my Motorola Triumph to my fedora 17 linux box USB port, I get an endless series of errors on the linux box as it desperately attempts to mount the phone as a USB drive. Stuff like this: Jun 23 10:26:00 zooty kernel: [528926.714884] end_request: critical target error, dev sdg, sector 4 Jun 23 10:26:00 zooty kernel: [528926.715865] sd 16:0:0:1: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 23 10:26:00 zooty kernel: [528926.715869] sd 16:0:0:1: [sdg] Sense Key : Illegal Request [current] Jun 23 10:26:00 zooty kernel: [528926.715872] sd 16:0:0:1: [sdg] Add. Sense: Invalid field in cdb Jun 23 10:26:00 zooty kernel: [528926.715876] sd 16:0:0:1: [sdg] CDB: Read(10): 28 20 00 00 00 00 00 00 04 00 If I go ahead and tell the phone to allow linux to mount the USB storage, the messages stop, and I get a mounted drive, but if all I want to do is use the debug bridge, my log on linux will continue to fill with this junk. Is there some udev magic I can do to make the system ignore this particular device as far as usb storage goes? I just noticed that if I tell the phone to enable USB storage, let linux recognize the new disk, then tell the phone to disable USB storage again, I get one additional log message about capacity changing to zero, but the endless spew of messages stops, so I guess one work around is to enable and disable USB right away.

    Read the article

  • How do I send e-mails with attachments to a Microsoft WebTV user?

    - by Petr 'PePa' Pavel
    my friend uses Microsoft WebTV (e-mail address ends with @webtv.net) and I'd like to send him an e-mail with a picture attached to it. We went through a series of attempts one of which ended up a success, all others a failure. He just can't see my e-mail in his mailbox, when it contains an attachment. E-mails without attachments always go through all right. What seemed to help in the first successful case, was that he added my e-mail address to his address book and my e-mail suddenly showed up. Seemed to have been delivered before but hidden. He kept my address in his address book however, it didn't help with the following trials. He did look into his junk folder, nothing there. I made sure the file name contains no spaces. It's a regular jpeg, named something-like-this.jpg I downsized it to have only about 50k, as I've read somewhere that that's a limit. I actually doubt this piece of information, because I think the successful attempt was larger. webtv.net contains zero information. I watched their video demo for the e-mail client, so I at least know how the user interface looks like. I've never laid my hands on the real thing. I'm an advanced user myself (a programmer) but I can't wrap my mind around this. He on the other hand, is a very technically inexperienced user and because he's half way across the globe, I can't come and look over his shoulder. He doesn't have a computer, afaik there's no way I could see what he sees. Any ideas on how to debug this? Thanks for your time, guys. P.S. I can't tag this "webtv" because such tag doesn't exist yet and my reputation is too low, sorry.

    Read the article

  • How to install Red Hat Enterprise Linux on Apple Macbook Pro MacBookPro4,1

    - by Todd V. Rovito
    I have a one year old Mac Book Pro that I am trying to get RHEL 5.4 installed on via bootcamp. No matter what I do I can't get the installer to boot. I have tried multiple DVD's and even verified the install works on a new Mac Book Pro. Most of the time the installer simply locks up. I usually use Linux text with all-generic-ide on the boot line. I removed the ide parameter and I just used linux text. The results I get are that a bunch of kernel messages appear then the background turns blue and a thin text box pops up saying its loading ata..... something it disappears too fast for me to read. Then the machine freezes. I pressed the alt function keys to see if I could look at the system log, here is what it says: Alt-f3 says "trying to mount CD device hda" Alt-f4 says status error: hda: lastFailedSense Hda: Failed opcode was: unknown Hda: Lost interrupt Hda: Drive not ready for command Ide-cd: command 0x3 timed out Above this junk it looks like it found the partition because it knew it was 20 GB and listed as /dev/sda3. I think it has something to do with the CD drive, is that possible? Thanks again for the support. PS I posted in the apple support forums ( Apple.com Support Discussions Boot Camp Installation and Storage) and didn't get an answer.

    Read the article

  • Mercurial hook fails on Windows

    - by Nick Hodges
    I am trying to use the headcount hook (https://bitbucket.org/dgc/headcount/overview) with my main develop repository. I pulled the code and placed it in C:\Python26\Lib\site-packages. I made the following entries into my hgrc file: [hooks] pretxnchangegroup.headcount = python:headcount.headcount.hook [headcount] push_ok = * commit_ok = * warnmsg = %(headcount)d new heads detected. You may not push new heads to this repository. debug = False All this is as per the install instructions. I then cloned the repository, created a branch, committed a change to that branch, and then issued: hg push -f as a test. However, this fails with: C:\junk\htmlwriter>hg push -f pushing to c:\code\htmlwriter searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files transaction abort! rollback completed abort: pretxnchangegroup.headcount hook is invalid (import of "headcount.headcou nt" failed) I then ran this: C:\Python26>python c:\Python26\Lib\site-packages\headcount\headcount.py Traceback (most recent call last): File "c:\Python26\Lib\site-packages\headcount\headcount.py", line 2, in <modul e> import mercurial.node ImportError: No module named mercurial.node I'm far from a python expert, so can someone help me figure out how to get the headcount hook to run inside my mercurial environment? Details: Windows 7, Mercurial 1.7.2, TortoiseHg 1.1.7

    Read the article

  • Understanding Netbook Partitions & UNR Installation

    - by Wesley
    Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I'm just looking at the Disk Management right now (in Windows XP) and I'm trying to understand what partition holds what. There is "Local Disk (C:)" which is 40GB, "RECOVERY" (no drive letter) which is 6GB and then "TEMP_PART01 (D:)" which is 103.05GB. XP is installed on Local Disk (C:) and I've only used this hard drive for all my files, etc. Recovery is recovery... probably not removable anyways. Now, what bugs me is the TEMP_PART01 (D:) partition, which contains quite a bit of random junk, such as EULA text documents, an "external installer", UI Wrapper Resource DLLs, a "VC_RED" Windows Installer Package and a few more files. I have no clue what any of it means, but I'm assuming that this was probably stuff that could have been on the Local Disk (C:), along with the WINDOWS, Program Files, and Docs and Settings folder. So, how should I go about this? Should I have kept all my data on D: and left all OS related files/folders on C:? Now, I want to install Ubuntu Netbook Remix. Question is, will this install within Windows, if I want to dual boot it? If not, would I partition D: into two small chunks, one on which I would install UNR? There are basically two questions in here, but it'd be great to get answers for both! Thanks in advance.

    Read the article

  • Messages don’t always appear in Mail.app

    - by MikeHoss
    I asked this question on serverfault, but it was correctly suggested that superuser is better -- and I agree: My wife and I share a Mac and use different accounts. We both use Apple's standard Mail.app. We can also get to our email accounts via SquirrelMail that our webhost provides. Both SquirrelMail and Mail.app are connecting via IMAP. My wife was the first to notice that not all messages were getting to the Mail.app. She would check the Mac (our main machine) and then a little while later check mail from another machine via SquirrelMail and see messages there that should have been on the Mac. She would go back and those messages would never show up. Lately, I have been seeing the same thing, though less often. I can't reproduce it, or just look at a message to see if they haven't been moved over. I've looked in Junk, etc. and the Mac simply never sees those messages via IMAP. Does anyone have a guess to something I could poke around at?

    Read the article

  • Escaping %’s in file-/folder-names at the command-line

    - by Synetech
    Does anybody of a way to access files and directories that have a % in their name (which is valid) from the command-line? Specifically, if there are two %’s and the text between them happens to correspond to an environment variable. For example, if there is a file called C:\blah\%temp%.txt or a folder called C:\Program Files\%temp%\, none of the following will work because the variable gets expanded: > dir "c:\blah\%temp%.txt" > dir "c:\blah\^%temp^%.txt" > dir "c:\blah\%%temp%%.txt" > dir "c:\blah\\%temp\%.txt" > dir "c:\program files\%temp%" > dir "c:\program files\^%temp^%" > dir "c:\program files\%%temp%%" > dir "c:\program files\\%temp\%" Using wildcards will work, but does not uniquely select the file/folder and may include others: > dir "c:\blah\?temp?.txt"        (also shows ztempz.temp, 1tempa.txt, etc.) > dir "c:\program files\?temp?"   (likewise) (This is frustrating because every now and then—usually when Explorer is restarted for whatever reason—the environment variables stop expanding and some places where they are used end up creating files or directories with the environment variable in it. For example, because I configured Chromium to store its cache in a subdirectory of %temp%, if the variable expands, it is fine, but when it doesn’t, Chromium creates a directory called %temp% under its own directory and stores the cache—which can get large—there. I want to add a line to my temp-/junk-file cleaning script to automatically delete that folder if it exists, but I cannot figure out how to access it from the command-line without resorting to wildcards.)

    Read the article

  • From the Tips Box: Pre-installation Prep Work Makes Service Pack Upgrades Smoother

    - by Jason Fitzpatrick
    Last month Microsoft rolled out Windows 7 Service Pack 1 and, like many SP releases, quite a few people are hanging back to see what happens. If you want to update but still error on the side of caution, reader Ron Troy  offers a step-by-step guide. Ron’s cautious approach does an excellent job minimizing the number of issues that could crop up in a Service Pack upgrade by doing a thorough job updating your driver sets and clearing out old junk before you roll out the update. Read on to see how he does it: Just wanted to pass on a suggestion for people worried about installing Service Packs.  I came up with a ‘method’ a couple years back that seems to work well. Run Windows / Microsoft Update to get all updates EXCEPT the Service Pack. Use Secunia PSI to find any other updates you need. Use CCleaner or the Windows disk cleanup tools to get rid of all the old garbage out there.  Make sure that you include old system updates. Obviously, back up anything you really care about.  An image backup can be real nice to have if things go wrong. Download the correct SP version from Microsoft.com; do not use Windows / Microsoft Update to get it.  Make sure you have the 64 bit version if that’s what you have installed on your PC. Make sure that EVERYTHING that affects the OS is up to date.  That includes all sorts of drivers, starting with video and audio.  And if you have an Intel chipset, use the Intel Driver Utility to update those drivers.  It’s very quick and easy.  For the video and audio drivers, some can be updated by Intel, some by utilities on the vendor web sites, and some you just have to figure out yourself.  But don’t be lazy here; old drivers and Windows Service Packs are a poor mix. If you have 3rd party software, check to see if they have any updates for you.  They might not say that they are for the Service Pack but you cut your risk of things not working if you do this. Shut off the Antivirus software (especially if 3rd party). Reboot, hitting F8 to get the SafeMode menu.  Choose SafeMode with Networking. Log into the Administrator account to ensure that you have the right to install the SP. Run the SP.  It won’t be very fancy this way.  Maybe 45 minutes later it will reboot and then finish configuring itself, finally letting you log in. Total installation time on most of my PC’s was about 1 hour but that followed hours of preparation on each. On a separate note, I recently got on the Nvidia web site and their utility told me I had a new driver available for my GeForce 8600M GS.  This laptop had come with Vista, now has Win 7 SP1.  I had a big surprise from this driver update; the Windows Experience Score on the graphics side went way up.  Kudo’s to Nvidia for doing a driver update that actually helps day to day usage.  And unlike ATI’s updates (which I need for my AGP based system), this update was fairly quick and very easy.  Also, Nvidia drivers have never, as I can recall, given me BSOD’s, many of which I’ve gotten from ATI (TDR errors).How to Enable Google Chrome’s Secret Gold IconHTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?Internet Explorer 9 Released: Here’s What You Need To Know

    Read the article

  • App Stores&ndash;In All Things, Its Quality Over Quantity

    - by D'Arcy Lussier
    Everybody has an opinion about Windows 8. People love it, people hate it, people are meh about it, people are apparently buying it from Microsoft stores in NYC as if it was water before a natural disaster…if there’s one thing that Microsoft product launches do well, its the ability to bring out strong emotional responses. Over at eweek.com, Don Reisinger wrote about 5 good and bad things about Windows 8. Yes, another opinion piece on WIndows 8. I figured since this one had good and bad it might be worthwhile to read. I then came across #10 on his list, and figured “What the hell…might as well post a bit of a rant on Windows 8 myself!” Here’s #10: 10. Bad: Too few apps Unfortunately, Microsoft wasn’t able to get too many developers to start producing applications for its Windows 8 Store. Microsoft hasn’t yet released official numbers, but some have said that the marketplace has less than 8,000 programs. Considering Apple’s App Store has 100 times that, it’s about time Microsoft starts leaning on developers to get more programs into its store. Believe me, Microsoft *has* been leaning on developers to get apps into the store. I’ve been asked at least 5 or 6 times from 5 or 6 different friends at Microsoft about whether I was going to write a Windows 8 app. I think Microsoft felt they had to try and address the number of apps available in their marketplace, since some people (like Don) would draw comparisons to the number of apps in the Apple marketplace. I feel for Microsoft in this, since the number of apps in a marketplace are an empty stat. Quality of Quantity I have an iPad that my family (wife, 10yo daughter, 3yo daughter) use. We all have our own apps installed on it. In addition, my wife has an iPhone 4S that she also installs apps on. As someone who gets asked by his kids often whether they can buy/download an app, the vast majority of the vast catalogue of iOS marketplace apps are crap! Do you realize how many “free” games are out there, only to really be not-free because you have to purchase in-game content to make the game actually playable? And how about searching – with such a vast array of apps and such high numbers of craptastic ones, trying to find something is incredibly difficult and can be frustrating. I would rather see that Microsoft has 8000 high quality apps in their store at launch, instead of 800000 that were mostly junk. Too Few Apps?! And seriously, 8000 is not a small number. How many iOS apps have I actually bought between the iPad and iPhone? I’ll be generous and say 30…heck, let’s round it up to 40. It’s not like I have 10,000 apps installed on my iPad, nor will that ever happen! So if people have, at the *launch* of a new platform ecosystem, EIGHT THOUSAND apps to choose from, I don’t see that as a fail at all! It should be noted that most of the most common apps (Netflix, Skype, etc.) are available for Windows 8 at launch – I guess I’ll have to wait a few weeks for My Pony Ranch and all its clones to start showing up; pity. Let’s Check Back in a Year So look, let’s check back in a year’s time and see what the app store looks like. My hope is that Microsoft doesn’t continue to push quantity over quality. Even knowing the optics that # of apps in the store carries and the pressure to catch Apple and Android marketplaces, I hope Microsoft avoids the scenario where there’s a good percentage of apps in the Windows Store that are utter rubbish and finding the gems will be cumbersome. But if that happens, we can thank guys like Dan who raised the false issue of app count at the launch for it.

    Read the article

  • Ubuntu + Wacom Intuos 4 + MyPaint HELP!

    - by Sativa
    Please keep in mind I'm not that computer savvy, but I will try any suggestion so please help me out! My tablet will stop working if the USB connection is ever broken, or the Ubuntu software is being updated. Sometimes it will stop working for no reason that I can see. The lights will still be on, but it won't be responsive. It doesn't work again until I restart the laptop with the tablet plugged in, which is grating if you have to do it every 25 min. or so... I'm not sure if the issue is with the port, the tablet/cable or the driver but any suggestions would be very welcome! Also, MyPaint is frequently having hiccups. It seems to save fine but at times it will randomly close down and when I open files they're often empty. They turn into 0Kb files and only contain a single empty layer. Also very grating, considering I lose days of work for no clear reason and without any heads up. Again, I'm not sure if the issue is with the port, the tablet/cable or the driver but any suggestions would be very welcome! The error message reads; Traceback (most recent call last): File "/usr/share/mypaint/gui/application.py", line 177, at_application_start(*junk=()) else: self.filehandler.open_file(fn) variables: {'fn': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora'), 'self.filehandler.open_file': ('local', <bound method FileHandler.wrapper of <gui.filehandling.FileHandler object at 0x7fdb89063a10>>)} File "/usr/share/mypaint/gui/drawwindow.py", line 60, wrapper(self=<gui.filehandling.FileHandler object>, *args=(u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora',), **kwargs={}) try: func(self, *args, **kwargs) # gtk main loop may be called in here... variables: {'self': ('local', <gui.filehandling.FileHandler object at 0x7fdb89063a10>), 'args': ('local', (u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora',)), 'func': ('local', <function open_file at 0x7fdb8b397b90>), 'kwargs': ('local', {})} File "/usr/share/mypaint/gui/filehandling.py", line 231, open_file(self=<gui.filehandling.FileHandler object>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora') try: self.doc.model.load(filename, feedback_cb=self.gtk_main_tick) except document.SaveLoadError, e: variables: {'self.doc.model.load': ('local', <bound method Document.load of <lib.document.Document instance at 0x7fdb8ab4f8c0>>), 'feedback_cb': (None, []), 'self.gtk_main_tick': ('local', <function gtk_main_tick at 0x7fdb8b397b18>), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/share/mypaint/lib/document.py", line 544, load(self=<lib.document.Document instance>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', **kwargs={'feedback_cb': <function gtk_main_tick>}) try: load(filename, **kwargs) except gobject.GError, e: variables: {'load': ('local', <bound method Document.load_ora of <lib.document.Document instance at 0x7fdb8ab4f8c0>>), 'kwargs': ('local', {'feedback_cb': <function gtk_main_tick at 0x7fdb8b397b18>}), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/share/mypaint/lib/document.py", line 772, load_ora(self=<lib.document.Document instance>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', feedback_cb=<function gtk_main_tick>) tempdir = tempdir.decode(sys.getfilesystemencoding()) z = zipfile.ZipFile(filename) print 'mimetype:', z.read('mimetype').strip() variables: {'zipfile.ZipFile': ('global', <class 'zipfile.ZipFile'>), 'z': (None, []), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/lib/python2.7/zipfile.py", line 770, __init__(self=<zipfile.ZipFile object>, file=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', mode='r', compression=0, allowZip64=False) if key == 'r': self._RealGetContents() elif key == 'w': variables: {'self._RealGetContents': ('local', <bound method ZipFile._RealGetContents of <zipfile.ZipFile object at 0x7fdb9b952790>>)} File "/usr/lib/python2.7/zipfile.py", line 811, _RealGetContents(self=<zipfile.ZipFile object>) if not endrec: raise BadZipfile, "File is not a zip file" if self.debug > 1: variables: {'BadZipfile': ('global', <class 'zipfile.BadZipfile'>)} BadZipfile: File is not a zip file

    Read the article

  • Let Me Show You Something: Instagram, Vine and Snapchat for Brands

    - by Mike Stiles
    While brands are well aware of how much more impactful images are than text-only posts on social channels, today you’re additionally being presented with platform after additional platform for hosting, doctoring and sharing photos and videos.  Can you play in every sandbox? And if you do, can you be brilliant on all of them? As has usually been the case, so far brands are sticking their toes into new platforms while not actually committing to them, or strategizing for them, or resourcing them. TrackMaven found of the 123 F500 companies using Instagram, only 22% of them are active on it. Likewise, research from Simply Measured found brands are indeed jumping in, with the number establishing a presence on Instagram up 55% over the past year. Users want them there…brand engagement has exploded 350%, and over 1/3 of the top brands have at least 10,000 followers. BUT…the top 10 brands are generating 33% of all posts, reaping 83% of all engagement. Things are also growing on Twitter’s Vine, the 6-second looping video app that hit 40 million users in August. The 7th Chamber says 5 tweets a second contain a Vine link. Other studies say branded Vines are 4 times more likely to be shared and seen than rank-and-file branded videos. Why? Users know that even if a video is pure junk, they won’t get robbed of too much of their valuable time. Vine is always upgrading so you can make sure your videos are worth viewers’ time. You can now edit videos, and save & work on several projects concurrently. What you can’t do is upload a finely crafted video into Vine, but you can do that with Instagram. The key to success? Same as with all other content; make it of value. Deliver a laugh or a lesson or both. How-to, behind the scenes peeks, contests, demos, all make sense in the short video format. Or follow Nash Grier’s example, which is to just have fun with and connect to your viewers, earning their trust that your next Vine will be as good as the last. Nash is only 15, has over 1.4 million followers, and adds about 100,000 a week. He broke out when one of his videos was re-Vined by some other kid with 300,000 followers. Make good stuff, get it in front of influencers, and your brand Vines could break out as well. Then there’s Snapchat, the “this photo will self destruct” platform. How can that be of use to brands besides offering coupons that really expire? The jury is out. But with an audience of over 100 million and a valuation of $800 million, media-with-a-time-limit is compelling. Now there’s “Snapchat Stories” that can last 24 hours and be shared to the public at large. You might be able to capitalize on how much more focus gets put on content when there’s a time limit on its availability. The underlying truth to all of this is, these are all tools. Very cool, feature rich tools, but tools. You can give the exact same art kit to 5 different people and you’d get back 5 very different works, ranging from worthless garbage to masterpiece. Brands are being called upon to be still and moving image artists. That’s what your customers are used to seeing, from a variety of sources. Commit to communicating with them accordingly. @mikestiles Photo: stock.xchng

    Read the article

  • Pro/con of using Angular directives for complex form validation/ GUI manipulation

    - by tengen
    I am building a new SPA front end to replace an existing enterprise's legacy hodgepodge of systems that are outdated and in need of updating. I am new to angular, and wanted to see if the community could give me some perspective. I'll state my problem, and then ask my question. I have to generate several series of check boxes based on data from a .js include, with data like this: $scope.fieldMappings.investmentObjectiveMap = [ {'id':"CAPITAL PRESERVATION", 'name':"Capital Preservation"}, {'id':"STABLE", 'name':"Moderate"}, {'id':"BALANCED", 'name':"Moderate Growth"}, // etc {'id':"NONE", 'name':"None"} ]; The checkboxes are created using an ng-repeat, like this: <div ng-repeat="investmentObjective in fieldMappings.investmentObjectiveMap"> ... </div> However, I needed the values represented by the checkboxes to map to a different model (not just 2-way-bound to the fieldmappings object). To accomplish this, I created a directive, which accepts a destination array destarray which is eventually mapped to the model. I also know I need to handle some very specific gui controls, such as unchecking "None" if anything else gets checked, or checking "None" if everything else gets unchecked. Also, "None" won't be an option in every group of checkboxes, so the directive needs to be generic enough to accept a validation function that can fiddle with the checked state of the checkbox group's inputs based on what's already clicked, but smart enough not to break if there is no option called "NONE". I started to do that by adding an ng-click which invoked a function in the controller, but in looking around Stack Overflow, I read people saying that its bad to put DOM manipulation code inside your controller - it should go in directives. So do I need another directive? So far: (html): <input my-checkbox-group type="checkbox" fieldobj="investmentObjective" ng-click="validationfunc()" validationfunc="clearOnNone()" destarray="investor.investmentObjective" /> Directive code: .directive("myCheckboxGroup", function () { return { restrict: "A", scope: { destarray: "=", // the source of all the checkbox values fieldobj: "=", // the array the values came from validationfunc: "&" // the function to be called for validation (optional) }, link: function (scope, elem, attrs) { if (scope.destarray.indexOf(scope.fieldobj.id) !== -1) { elem[0].checked = true; } elem.bind('click', function () { var index = scope.destarray.indexOf(scope.fieldobj.id); if (elem[0].checked) { if (index === -1) { scope.destarray.push(scope.fieldobj.id); } } else { if (index !== -1) { scope.destarray.splice(index, 1); } } }); } }; }) .js controller snippet: .controller( 'SuitabilityCtrl', ['$scope', function ( $scope ) { $scope.clearOnNone = function() { // naughty jQuery DOM manipulation code that // looks at checkboxes and checks/unchecks as needed }; The above code is done and works fine, except the naughty jquery code in clearOnNone(), which is why I wrote this question. And here is my question: after ALL this, I think to myself - I could be done already if I just manually handled all this GUI logic and validation junk with jQuery written in my controller. At what point does it become foolish to write these complicated directives that future developers will have to puzzle over more than if I had just written jQuery code that 99% of us would understand with a glance? How do other developers draw the line? I see this all over Stack Overflow. For example, this question seems like it could be answered with a dozen lines of straightforward jQuery, yet he has opted to do it the angular way, with a directive and a partial... it seems like a lot of work for a simple problem. Specifically, I suppose I would like to know: how SHOULD I be writing the code that checks whether "None" has been selected (if it exists as an option in this group of checkboxes), and then check/uncheck the other boxes accordingly? A more complex directive? I can't believe I'm the only developer that is having to implement code that is more complex than needed just to satisfy an opinionated framework.

    Read the article

  • SetupAPI.DLL to HID.DLL

    - by lexdean
    With the SetupAPI.DLL I execute Function SetupDiGetClassDevs and get a pointer or handle Then Begin a loop Then I run Return = Function SetupDiEnumDeviceInterfaces with SP_DEVICE_INTERFACE_DATA.cbSize = 0 to get my size of what SP_DEVICE_INTERFACE_DATA needs to be Then I set size and execute again SP_DEVICE_INTERFACE_DATA.cbSize = return (the size) Function SetupDiEnumDeviceInterfaces From the data structures I get DevicePath from SP_DEVINFO_DATA And a heap of information from the registry if I want it I beleave What I’m realy wanting is to access the HID.DLL and call HidD_GetAttributes to get VendorID, ProductID, and VersionNumber To this Enumerated device, so I can ID the device. I expect this particular info would come from the USB device its self. Can any one show me how to do that. By the way in my version of windows XP I’m using the registry path, I cannot find HKEY_LOCAL_MACHINE\Enum\HID...\Class I do not even get HKEY_LOCAL_MACHINE\Enum\ I think this is because I have not executed the SetupDiEnumDeviceInterfaces Function Why? I find Lake View Research the only data that is in complete And does not cover this subject. Why is it all over the net when its junk???????? Thanks in advance, J Lex Dean.

    Read the article

  • Python MySQL wrong architecture error

    - by phoebebright
    I've been at this for some time and read many sites on the subject. suspect I have junk lying about causing this problem. But where? This is the error when I import MySQLdb in python: >>> import MySQLdb /Library/Python/2.6/site-packages/MySQL_python-1.2.3c1-py2.6-macosx-10.6-universal.egg/_mysql.py:3: UserWarning: Module _mysql was already imported from /Library/Python/2.6/site-packages/MySQL_python-1.2.3c1-py2.6-macosx-10.6-universal.egg/_mysql.pyc, but /Users/phoebebr/Downloads/MySQL-python-1.2.3c1 is being added to sys.path Traceback (most recent call last): File "<stdin>", line 1, in <module> File "MySQLdb/__init__.py", line 19, in <module> import _mysql File "build/bdist.macosx-10.6-universal/egg/_mysql.py", line 7, in <module> File "build/bdist.macosx-10.6-universal/egg/_mysql.py", line 6, in __bootstrap__ ImportError: dlopen(/Users/phoebebr/.python-eggs/MySQL_python-1.2.3c1-py2.6-macosx-10.6-universal.egg-tmp/_mysql.so, 2): no suitable image found. Did find: /Users/phoebebr/.python-eggs/MySQL_python-1.2.3c1-py2.6-macosx-10.6-universal.egg-tmp/_mysql.so: mach-o, but wrong architecture I'm trying for 64 bit so checked here: file $(which python) /usr/bin/python: Mach-O universal binary with 3 architectures /usr/bin/python (for architecture x86_64): Mach-O 64-bit executable x86_64 /usr/bin/python (for architecture i386): Mach-O executable i386 /usr/bin/python (for architecture ppc7400): Mach-O executable ppc file $(which mysql) /usr/local/mysql/bin/mysql: Mach-O 64-bit executable x86_64 Have set my default version of python to 2.6 python Python 2.6.1 (r261:67515, Feb 11 2010, 00:51:29) [GCC 4.2.1 (Apple Inc. build 5646)] on darwin Tried deleting build directory and python setup.py clean Renamed Python/2.5/site-packages so it could not try and pick that up. Run out of ideas. Any suggestions?

    Read the article

  • How to Global onRouteRequest directly to onBadRequest?

    - by virtualeyes
    EDIT Came up with this to sanitize URI date params prior to passing off to Play router val ymdMatcher = "\\d{8}".r // matcher for yyyyMMdd URI param val ymdFormat = org.joda.time.format.DateTimeFormat.forPattern("yyyyMMdd") def ymd2Date(ymd: String) = ymdFormat.parseDateTime(ymd) override def onRouteRequest(r: RequestHeader): Option[Handler] = { import play.api.i18n.Messages ymdMatcher.findFirstIn(r.uri) map{ ymd=> try { ymd2Date( ymd); super.onRouteRequest(r) } catch { case e:Exception => // kick to "bad" action handler on invalid date Some(controllers.Application.bad(Messages("bad.date.format"))) } } getOrElse(super.onRouteRequest(r)) } ORIGINAL Let's say I want to return a BadRequest result type for all /foo URIs: override def onBadRequest(r: RequestHeader, error: String) = { BadRequest("Bad Request: " + error) } override def onRouteRequest(r: RequestHeader): Option[Handler] = { if(r.uri.startsWith("/foo") onBadRequest("go away") else super.onRouteRequest(r) } Of course does not work, since the expected return type is Option[play.api.mvc.Handler] What's the idiomatic way to deal with this, create a default Application controller method to handle filtered bad requests? Ideally, since I know in onRouteRequest that /foo is in fact a BadRequest, I'd like to call onBadRequest directly. Should note that this is a contrived example, am actually verifying a URI yyyyMMdd date param, and BadRequest-ing if it does not parse to a JodaTime instance -- basically a catch-all filter to sanitize a given date param rather than handling on every single controller method call, not to mention, avoiding cluttering up application log with useless stack traces re: invalid date parse conversions (have several MBs of these junk trace entries accruing daily due to users pointlessly manipulating the uri date in attempts to get at paid subscriber content)

    Read the article

  • Creating generic list of instances of a class.

    - by Jim Branson
    I have several projects where I build a dictionary from a small class. I'm using C# 2008, Visual studio 2008 and .net 3.5 This is the code: namespace ReportsTest { class Junk { public static Dictionary<string, string> getPlatKeys() { Dictionary<string, string> retPlatKeys = new Dictionary<string, string>(); SqlConnection conn = new SqlConnection("Data Source=JB55LTARL;Initial Catalog=HldiReports;Integrated Security=True"); SqlDataReader Dr = null; conn.Open(); SqlCommand cmnd = new SqlCommand("SELECT Make, Series, RedesignYear, SeriesName FROM CompPlatformKeys", conn); Dr = cmnd.ExecuteReader(); while (Dr.Read()) { utypPlatKeys rec = new utypPlatKeys(Dr); retPlatKeys.Add(rec.Make + rec.Series + rec.RedesignYear, rec.SeriesName); } conn = null; Dr = null; return retPlatKeys; } } public class utypPlatKeys { public string Make { get; set; } public string Series { get; set; } public string RedesignYear { get; set; } public string SeriesName { get; set; } public utypPlatKeys(SqlDataReader dr) { this.Make = dr.GetInt16(dr.GetOrdinal("Make")).ToString("D3"); this.Series = dr.GetInt16(dr.GetOrdinal("Series")).ToString("D3"); this.RedesignYear = dr.GetInt16(dr.GetOrdinal("RedesignYear")).ToString(); this.SeriesName = dr["SeriesName"].ToString(); } } } The immediate window shows all of the entries in retPlatKeys and if you hover over retPlatKeys after loading it indicates the number of elements like this: "retPlatKeys| Count = 923 which is correct. I went to create a new project using this pattern only now the immediate window says retPlatKeys is out of scope and hovering over retPlatKeys after loading I get something like retPlatKeys|0x0000000002578900. Any help is greatly appreciated.

    Read the article

  • Rails add a param to the end of a search query

    - by bob
    Hello, I am trying to implement a sort on the returned results of a search with rails. Filter by: 'recent' % | 'lowest_price' % | 'highest_price' % here are my links. I would like to add a filter to the end of my search query. So for example, I submit a search and I get back results and in my url I have http://localhost:3000/junks?search=handbag&condition=&category=&main_submit=Go! I would then like the user to be able to click one of the above links and have the page come back with a new query (i have this set up in the controller like such) con_id = params[:condition] if params[:category].nil? || params[:category].empty? cat_id = params[:category] results = Junk.search params[:search], :with => { :category_id => cat_id, :condition_id => con_id } case params[:filter] when "lowest_price" @junks = results.lowest_price.paginate :page => params[:page], :per_page => 12 when "highest_price" @junks = results.highest_price.paginate :page => params[:page], :per_page => 12 else @junks = results.paginate :page => params[:page], :per_page => 12 end else I would like the user to be able to click on of the above links and append a filter param to the end of the search query so that my controller can pick it up and call the correct database queries as seen in the case statement above. I'm guessing the url will look like this http://localhost:3000/junks?search=handbag&condition=&category=&main_submit=Go!&filter="lowest_price" How can I do this? Is there a better way?

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17  | Next Page >