Search Results

Search found 1543 results on 62 pages for 'motherboard'.

Page 13/62 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• System failure - need diagnostic recommendation

  - by Ladislav Mrnka

  I have big problem with my computer. Configuration is: Intel i7 + 6x2GB OCZ DDR3 Motheboard: Asus P6T Deluxe V2, HDD controller configured to AHCI Main drive: OCZ Vertex 2 (SSD) - contains all installed programs and system Second drive: Samsung SpinPoint - contains User profiles, ProgramData, virtual machines and databases Third drive: Samsung SpinPoint - data drive + backups OS: Windows 7 Ultimate x64 I have never had any problem with this computer until now. During weekend my computer completely crashed without any reason. Each time I tried to boot to Windows I got BSOD with message BAD_SYSTEM_CONFIG_INFO and automatic restart (I didn't install any new SW or HW). But after restart main OCZ drive was disconnected (not detected by BIOS). When I turned off and on computer, the drive was again connected. It also happend every single time I tried to repair installation somehow. It ended with some error and after restart drive was disconnected. The only thing which worked was format + fresh install. After installing almost everything I wanted to install Visual Studio 2010 Ultimate (complete installation without SQL Server Express). During installation of VS itself I always get BSOD - it is too fast so I'm not able to read description. After restart it searches for all disk drives for really long time and sometimes it changes boot drive so the system is not able to start - Bootmgr not found. After reconfiguring BIOS the system starts. There is no event describing the failure in Event viewer. Installing VS 2010 is absolutely necessary for me. I need help with diagnostic. I need to find where is the problem - I expect that the problem is in OCZ drive or in HDD controller on motherboard but I don't know how to find it. All components still have valid warranty. Can you recommend me some approach or tools to find the problem? Edit: I'm still looking for source of the problem. New information is that Windows are not able to perform check disk (Chkdsk) on the SSD system drive. After restarting it always starts checking drive and in part where files are checked it fails with BSOD - BAD_SYSTEM_CONFIG_INFO. After next restart and skipping check disk tests the system runs.

  Read the article

• USB keyboard not recognized by motherboard with only a legacy PS/2 header

  - by Luis

  I've bought a D945GSEJT Atom motheboard that has three usb ports available and no PS/2 connector, just a PS/2 header. I have a PS/2 keyboard with a PS/2 to USB adapter and connected it to a USB port. I tried all three USB ports. The problem is that the board seems to not recognize my keyboard. None of the keys I press are detected by the system. I've read that maybe I could try to change BIOS USB settings to solve this detection problem. But how can I do it if I can't type anything? Is there any other option other than buying a PS/2 adapter and plug it to the PS/2 header?

  Read the article

• Where can i get the motherboard cd's

  - by Velmrugan

  Hi, Can you please tell me where can i get the mother board softwares for my intel celeron processor. I need Audio driver, Graphics & windows installer for my Intel celeron processor. Where can i download all these softwares, freely. I searched in Intel homepage but i cant find what and all to download, So please can u tell me briefly how to download these files. Regards, Velmurugan

  Read the article

• Computer makes hissing noise, turns off after few seconds

  - by Kaustubh P

  I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

  Read the article

• How do you test if a PCI slot is working - motherboard diagnostic software?

  - by Adam

  I suspect that my motherboard is bad, and that my PCI-E slot is not working. I have a Gigabyte motherboard that had a Hauppage 2250 working fine in the PCI-E slot for many months. However - recently - would not get TV channels that I used to get --- until finally Media center cant detect any channels at all. Got a new tuner card (ATI 350 card) - cant detect any channels. The cable signal is good - I have it connected directly to a TV - all channels come in clear. SO that is why I suspect a motherboard problem. Are there any motherboard diagnostic scanner utilities that can verify I need a new motherboard

  Read the article

• Gigabyte Onboard graphics card heating up and then crashing

  - by this is text comes from a db

  5 minutes after I turn on my PC the onboard graphics card is usually over 80° celsius and then crashes (random colors on screen, only way to get out is to just plug out the pc). I haven't installed any new drivers or added/changed hardware recently Everything went fine until yesterday What should I do next? Do I have to buy a new mainboard right now? There is no fan on the onboard graphics card, only a heatsink.

  Read the article

• Hardware selection for Linux machine

  - by bguiz

  Hi, I am building a new box, and planning to install Ubuntu 9-04 or Ubuntu 9-10 on it. I am wary of the hardware selection because in the past I struggled with lack of drivers or driver incompatibility with the network card and video card, etc. The last time I built a Linux box was 2007, and I have not kept up to date with the changes since. One notable difference is that I can no longer find motherboards with nVidia chip sets. See what I mean (links to my local shop's website): Intel motherboards: http://www.centrecom.com.au/catalog/default.php?page=1&cPath=36_62 AMD motherboards: http://www.centrecom.com.au/catalog/default.php?page=1&cPath=36_63 I have already checked the Ubuntu forums, but their motherboards section is rather outdated, and I did not look further. I would like to know your suggestions for what Linux compatible hardware that you have got. Thank you!

  Read the article

• Why are most fan controllers limited to a minimum of 5v?

  - by ULTRA_POROV

  I have a fan that runs at about 3500 rpm at 12v. At 5v (the minimum that my zalman fanmate allows) it runs at about 2000 rpm which is still quite LOUD. I looked on the net for other controllers that can go below 5v and found nothing. Why is that? Any solutions?

  Read the article

• How to get ASUS UEFI BIOS EZ Mode utility on my asus laptop?

  - by Manoj Kumar

  i have asus laptop with the following specs: Manufacturer ASUSTeK Computer Inc. Model K53SC (CPU 1) Version 1.0 Chipset Vendor IntelBIOS Brand American Megatrends Inc. Version K53SC.208 Chipset Model Sandy Bridge BIOS Brand American Megatrends Inc. Version K53SC.208 Operating System MS Windows 7 Ultimate 64-bit In the BIOS setting i have enabled 'UEFI' but im not unable to see the graphical interface of UEFI.

  Read the article

• Maximum RAM on Biostar P4M8PM7 Socket775 mATX board

  - by Alex Balashov

  I have a server with a Biostar P4M8PM7 ("Pro-M7") board based on a VIA chipset. It's a strange board to put in a server because it seems like more of a desktop board to me, but alas! It takes DDR2-667 (PC5300) RAM. What I can't figure out is the maximum amount I can put in it, as I cannot find the manual anywhere online. I've found a few marketing broadsheets from online retailers that say, "up to 2 GB of RAM!" but I am not sure whether to believe them. They also do not seem to be quite for the same board, as they indicate DDR2 400/533 RAM, for example: http://www.geeks.com/details.asp?invtid=P4M8P-M7. The manufacturer's web site says the same thing, but does not elaborate. It's a 64-bit CPU and board; is there a technical reason why the board would not be able to address more than 2 GB? Can someone tell me what sort of that reason that would be? I bought this server from someone really hoping I could put 8 to 16 in it, and wanted to do some research before I gave up. On a related note, it's not indicated anywhere whether it can take ECC RAM; the existing chips are not ECC, but most memory sold in the range I'm looking for (e.g. DIMMs with enough chip density to do 8 GB) seems to be server-class and for that reason ECC. Any ideas? Thank you very much for your consideration in advance!

  Read the article

• intel dg31pr heat issues

  - by user17077

  Hi there, I have got Intel 8400 processor installed on a DG31PR board. My board gets hot quite quickly and the temperature hovers around 50-65 C at normal load. I have got a good cooling system but I wonder if its a problem in my mobo. Can you guys kindly suggest what to do? My processor runs fine and stands at 30-32 C. Thanks. Regards, Adnan

  Read the article

• Intel D510MO board - 1000Mbit LAN or not?

  - by T.J. Crowder

  The Intel forum seems to be down (signing in fails with connection refused), but perhaps someone here knows the answer. The Intel D510MO product page says that the LAN is 10/100/1000, but when I look at the NM10 chipset it uses, it says it's just 10/100 (and the detailed PDF spec here backs that up pretty definitively). I don't immediately see anything saying the D510MO has a different LAN controller than the NM10's onboard one, and it would seem odd if it did given the purpose of the board (low power, small footprint; integrated). Does this board support 1000Mbit LAN or not? Anyone have direct knowledge of it? Thanks in advance.

  Read the article

• Can't get Intel drivers for ASUS P6T Deluxe

  - by Alex K

  Hi everybody, A few days back my Win7 Ultimate started bugging me to install the RAID drivers for my ASUS P6T Delux. Fine, I'm all for having up to date drivers even for stuff I don't use. The problem is that the drivers I download from both ASUS support site here and the ones I get directly from Intel (can't post the second link, since I have less than 10 rep, but it's the first hit for "Intel(R) Matrix Storage Manager Driver" on google) say that my system does not meet the minimum system requirements. Impossible, I would think, what with it having the X58 chipset and the Windows version is supported one. Has anyone encountered something like this before? Any clues on how to solve this would be much appreciated. Thanks!

  Read the article

• MSI X58M - Digital Audio Output?

  - by iik

  Does anyone own a MSI X58M mainboard? Are there any digital audio connectors on the board? Is it possible to send the audio digitally to my speakers?

  Read the article

• Do i need to join Graphics Card with CPU fan

  - by Mirage

  Initially i had inno 3d 256MB Nvidia GTS graphics card. I also had another Big FAN above the processor (Vendor put in quad core) In that card there was one cable which was joined with that FAN. Now i have changed the CARD to 1GB Nvidia GT9600 . But there is no pins to join the fan with that card. Is it ok . i don't know why old card was joined with FAN

  Read the article

• I must clear my cmos to be able to boot

  - by Fredou

  I have this Asus p7p55d-e pro for about 8 months(got it last July) and for this last 3-4 days I cannot boot without clearing my CMOS what I have is: Seasonic M12D 750W ASUS P7P55D-E Pro Intel Core i5 760 Quad Core Processor Lynnfield LGA1156 XFX GeForce® 8800 GT Alpha Dog 512MB DDR3 Standard (PV-T88P-YDF4) 2x Corsair XMS3 CMX4GX3M2A1600C7 4GB DDR3 2X2GB DDR3-1600 CL 7-8-7-20 I tried to remove all the unnecessary stuff: HD/dvd/pci card/usb cable/etc I tried with only 1 dimm filled, instead of my 4, each one individually it didn't work I tried changing the battery, here goes a few dollars to nowhere, didn't work if I don't reset the CMOS it sometime stock on RAM led, sometime on BOOT DEVICE led, when this happen, it stuck on CPU speed detection when I boot right after the reset, i MUST click on the F2 option (boot with default bios setting) if i go into the bios and save/restart, i have to reset it again when booted, everything is rock solid stable, tried memtest, cpu stress, etc, etc. without issue what should be my next step? trying a new psu? (i need to find one..) doing rma? (i need this mb since it's my only computer...) something else?

  Read the article

• Computer won't power on

  - by briskmojo

  Was working fine for over a year, now won't boot. LEDs on the GFX card and one on the MOBO labeled PWR glow when plugged in, but nothing happens when I push power and shorting switch pins does nothing either. If I pop out the CMOS battery and put it back in then try the fans lurch but nothing happens. Shorting the 15 and 16 pins turns the PSU on, and when the 24pin connector is attached to the MOBO it will start up briefly then stop. If I plug in the CPU header it returns to what I described, no power but will lurch after replacing the CMOS battery. Should I be shopping for a new PSU or is there another problem maybe?

  Read the article

• Asus P6X58D & 12GB of RAM

  - by Hunter

  I just assembled my new PC and it screams, BUT it's only recognizing 8GB of ram in BIOS and OS rather than the installed 12GB. In the BIOS the RAM was registering at 1066 so I set it to 1600MHz. I update the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS = Windows 7 Ultimate 64-bit Mobo = Asus P6X58D Premium CPU = Intel Core i7 920 RAM = CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD = Intel 80GB SSD SATA II PS = Kingwin 1000W Modular I've installed the Beta BIOS 0808 but no luck!

  Read the article

• Is dual-channel RAM operation independent for each bank?

  - by user553702

  For dual-channel usage of DDR3 SDRAM, what happens if one bank has DIMMs in both channels but the other bank has only one DIMM in one channel? Will the bank with the paired DIMMs operate at the dual-channel rate while the bank with the unpaired DIMM operates at the single-channel rate? Or does having a bank with an unpaired DIMM force all of the RAM to operate as single-channel? For example, if I initially have only one bank populated with paired 4GB sticks operating as dual-channel, what happens if I then add a single 8GB stick to the other channel leaving the last DIMM slot empty? Will this stop the 4GB sticks from being dual-channel? In addition, what happens if each bank has DIMMs of different clock speeds? Does each dual-channel bank operate at an independent speed, or does all of the RAM operate at the slowest DIMM's speed? For example, in the above scenario, what would happen if the 8GB stick I added is slower than the original 4GB sticks in the other bank? Will the (paired) 4GB sticks then operate at a slower speed than before?

  Read the article

• Mother Board Question

  - by user33931

  1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

  Read the article

• Intel Matrix Storage Manager not showing on Asus P5W DH Deluxe?

  - by Leon

  I have set, under "Main" - "IDE Configuration" - "Configure SATA as" to "Raid" and "Onboard Serial-ATA BootRom" to "Enabled", but upon POST I still do not see the Intel Matrix Storage Manager screen where I can press Ctrl+I to set up my raid? I have the latest BIOS version EDIT: Although I had set the rom to "enabled", I then went and reset the bios settings to default. I then set the bootrom setting to "disabled", restarted and then "enabled" again and it seemed to work.

  Read the article

• Connecting mother board, power supply, and tower

  - by JordanD

  I am working on putting together a desktop for the first time and and ran into a problem, I am not sure how to connect the fans that came in my tower, my power supply, and connect them all to the mother board. Tower Mobo Power Supply There are 3 fans in the tower, each have 3 pin male and female connector that come connected, and 4 pin (larger?) male and female connector which are hanging. How would I go about connecting The fans together then to the power supply and mobo so it is easiest control (or suggest me a smart / better option). Pictures are from fans on HAF 922 Tower. Thanks

  Read the article

• GA 8KNXP Rev1.0: 4 GB installed, only 3.5 GB recognized by BIOS

  - by hurikhan77

  I've installed 2x 1 GB and 4x 512 MB memory into my GA-8KNXP system which would sum up to 4 GB. The specification from the manual says: Maximum memory support: 4 GB. If all six slots are utilized, slot 5+6 may only equipped with single-sided RAM modules. And so I did. Anyway: The BIOS counts up to 3.5 GB and finishes there. Also my Linux system reports only 3.5 GB of memory although 4 GB memory support is activated in the kernel. So I suppose this is a memory mapping issue or a hardware issue. I've tried removing only on of the 512 MB memory modules leaving 5 modules in place. But that just stopped the system from powering on correctly (screen stays black although fans and leds come to live). Dual Channel was detected and enabled so the system technically found all 6 modules. "dmidecode" in Linux reports only memory in slots 1 to 4 and ignores slots 5+6, so it only detects 3 GB of memory. It also says the system would support up to 16 GB of memory with 4 GB modules per slot. I think technically the chipset should be able to offer and utilize the complete 4 GB memory range. Any clues what else I could check? Or do I have just to live with 0.5 GB wasted memory?

  Read the article

• SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

  - by V M

  After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

  Read the article

• when i set my FSB to 400mhz in bios it actually stays at 333mhz

  - by Mantis

  My front side bus (FSB) is rated for a maximum of 400mhz (Rated FSB 1600MHz). In fact, it used to run at 400mhz until recently. I'm trying to overclock my E8400 to 3.6GHz. I have done that in the past by having the FSB at 400 with a multiplier of 9. Now, when I set the FSB to 400, the system boots as normal, but the FSB stubbornly is stuck at 333 (Rated FSB 1333). The CMOS is set to 400, I've triple-checked it. It's just the FSB isn't listening. Is my FSB damaged? Gigabyte mobo

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >