Search Results

Search found 56958 results on 2279 pages for 'system configuration'.

Page 130/2279 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• HAproxy roundrobin balancing does not appear to be distributing evently

  - by andrew

  Hello, I know that with loaded servers, roundrobin in HAproxy (1.4.4) does not evenly distribute, but my servers are currently getting NO traffic (test setup), and roundrobin balancing does www1,www1,www1,www1,www1,...www2,www2,www2,...,www1... I'm verifying this by having the script being run on each server cat /etc/HOSTNAME (slackware). I need to have it switch back and forth each time to test some session stuff (stored in shared memcached) but am having trouble getting it to switch between my two web servers on each request. global log 127.0.0.1 local0 warning maxconn 4096 chroot /usr/share/haproxy pidfile /var/run/haproxy.pid uid 99 gid 99 daemon defaults balance roundrobin fullconn 100 maxconn 4096 mode http option dontlognull option http-server-close option forwardfor option redispatch retries 3 timeout connect 5000 timeout client 20000 timeout server 60000 timeout queue 60000 stats enable stats uri /haproxy stats auth ***:*** frontend www *:80 log global acl is_upload hdr_dom(host) -i uploads.site.com acl is_api hdr_dom(host) -i api.site.com acl is_dev hdr_dom(host) -i dev.site.com acl is_apidev hdr_dom(host) -i apidev.site.com use_backend uploads.site.com if is_upload use_backend api.site.com if is_api use_backend dev.site.com if is_dev !is_apidev default_backend site.com backend site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 backend api.site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:api.site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 backend dev.site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:dev.site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 backend uploads.site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:uploads.site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 backup weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 So basically, I have some different back-ends (I've verified the ACLs are working), with the default option "roundrobin" selected. I've tried removing weights, removing the minconn/maxconn/fullconn attributes for all servers (not just the backend I'm testing), tried removing the ACLs, etc. I've been testing on dev.site.com BTW. Anyone see a reason why I can't get something like www1,www2,www1,www2,...? Also, this is one of my first questions on here, so please let me know if I left anything needed out of my post. Thanks!

  Read the article

• Postfix - how to redirect email if they will rejecting?

  - by Bartosz Kowalczyk

  I have problem with spam and postfix + postgray. It generally good works but I have false-positive still and reject good email. And now I have problems. Can I configure postfix (and postgray) that: if_reject than redirect to [email protected] (change recipients). Or I don't know maybe: Each email have to copy and send to [email protected] Then filtering? If hit restriction than just reject (another copy is in [email protected]) How to do it? Sorry for my english. Can you help me? Thank you

  Read the article

• How to configure IIS for SVG and web testing with Visual Studio?

  - by macias

  Let's say I have a simple web page with svg image in it: <img src="foobar.svg" alt="not working" /> If I make this page as static html page and view it directly svg is displayed. If I type the address of this svg -- it is displayed. But when I make this as .aspx page and launch it dynamically from Visual Studio I get alt text. If I type the address of this svg (from localhost, not as a local file) -- browser tries to download it instead of displaying. I already defined mime type in IIS (for entire server -- "image/svg+xml") and restarted IIS. Same effect as before. Question: what should I do more? Update WireShark won't work (it is in documentation), I tried also RawCap, but it cannot trace my connection (odd), luckily Fiddler worked: From client: GET http://127.0.0.1:1731/svg/document_edit.svg HTTP/1.1 Host: 127.0.0.1:1731 User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:10.0.1) Gecko/20100101 Firefox/10.0.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Answer from server: HTTP/1.1 200 OK Server: ASP.NET Development Server/10.0.0.0 Date: Thu, 16 Feb 2012 11:14:38 GMT X-AspNet-Version: 4.0.30319 Cache-Control: private Content-Type: application/octet-stream Content-Length: 87924 Connection: Close <?xml version="1.0" encoding="UTF-8" standalone="no"?> <!-- Created with Inkscape (http://www.inkscape.org/) --> <svg xmlns: *** FIDDLER: RawDisplay truncated at 128 characters. Right-click to disable truncation. *** For the record, here is useful Q&A for Fiddler: http://stackoverflow.com/questions/826134/how-to-display-localhost-traffic-in-fiddler-while-debugging-an-asp-net-applicati

  Read the article

• Problem in listening to multicast in multihomed Linux server

  - by Lior

  I am trying to write a multicast client on a machine with two NICs, and I can't make it work. I can see with a sniffer that once I start the program the NIC (eth4) start receiving the multicast datagrams: y.y.y.y. (some ip) - z.z.z.z (multicast ip, not my eth4 NIC IP) UDP Source port: kkk (some other port) Destination port: xxx (multicast port) However, I can't get those packets using my program (listening to port xxx on eth4). I also added: route add 224.0.0.0 netmask 240.0.0.0 dev eth4 Searched the web for some examples/explanations, but it seems like I do what everybody else does. Any help will be appreciated. is there anything else to do with route/iptables?

  Read the article

• Scaling up an apache server

  - by pehrs

  I have an Ubuntu server running apache2 which i expect to be hit by around 500-1000 (concurent) users for a limited amount of time. The server serves a mixture of custom (rather light) php pages connected to a postgresql db (around 20 Mb in size) and static content. The hardware is stable and pretty beefy: Intel Xeon E5420 @ 2.5 GHz 12 GB RAM During previous rushes on this server I have increased ServerLimit, the MaxClients for the MPM modules and decreased Timeout and KeepAliveTimeout. It has worked, but been sluggish and I have a feeling more can be done. How would you suggest configuring the Apache server to handle this kind of load?

  Read the article

• Generating/managing config files for hosted application

  - by mfinni

  I asked a question about config management, and haven't seen a reply. It's possible my question was too vague, so let's get down to brass tacks. Here's the process we follow when onboarding a new customer instance into our hosted application : how would you manage this? I'm leaning towards a Perl script to populate templates to generate shell scripts, config files, XML config files, etc. Looking briefly at CFengine and Chef, it seems like they're not going to reduce the amount of work, because I'd still have to manually specify all of the changes/edits within the tool. Doesn't seem to be much of a gain over touching the config files directly. We add a stanza to the main config file for the core (3rd-party) application. This stanza has values that defines the instance (customer) name the TCP listener port for this instance (not one currently used) the DB2 database name (serial numeric identifier, already exists, they get prestaged for us by the DBAs) three sub-config files, by name - they need to be created from 3 templates and be named after the instance The sub-config files define: The filepath for the DB2 volumes The filepath for the storage of objects The filepath for just one of the DB2 volumes (yes, redundant to the first item. We run some application commands, start the instance We do some LDAP thingies (make an OU for the instance, etc.) We add a stanza to the config file for our security listener that acts as a passthrough to LDAP instance name LDAP OU TCP port for instance DB2 database name We restart the security listener (off-hours), change the main config file from item 1, stop and restart the instance. It is now authenticating via LDAP. We add the stop and start commands for this instance to the HA failover scripts. We import an XML config file into the instance that defines things for the actual application for the customer - user names, groups, permissions, and business rules. The XML is supplied by the implementation team. Now, we configure the dataloading application We add a stanza to the existing top-level config file that points to a new customer-level config file. The new customer-level config file includes: the instance (customer) name the DB2 database name arbitrary number of sub-config files, by name Each of the sub-config files defines: filepaths to the directories for ingestion, feedback, backup, and failure those filepaths have a common path to a customer-specific folder, and then one folder for each sub-config file Each of those filepaths needs to be created We need to add this customer instance to our monitoring scripts that confirm the proper processes are running and can be logged into. Of course, those monitoring config files include the instance name, the TCP port, the DB2 database name, etc. There's also a reporting application that needs to be configured for the new instance. You get the idea. There's also XML that is loaded into WAS by the middleware team. We give them the values for them to plug into the XML - they could very easily hand us the template and we could give them back completed XML.

  Read the article

• Potential issues with SharePoint 2007 and SQL Server default collation?

  - by MDRoz

  SharePoint installation guidance specifies that SQL Server collation should be set to Latin1_General_CI_AS_KS_WS (case-insensitive, accent-sensitive, Kana-sensitive, and width-sensitive). However, our internal hosting group uses the default SQL Server 2005 collation SQL_Latin1_General_CP1_CI_AS. What are the potential issues we might face with MOSS 2007?

  Read the article

• Media Player Classic creating folder

  - by radiok

  Whenever I open a file in Media Player Classic it creates a new folder "Media Player Classic" under the folder of the file I opened. Originally it was putting a playlist in that folder, "default.mpcpl", but I found that if you open the playlist (Ctrl+7) and right-click the playlist, there is an option "Remember items", unchecking that will prevent MPC from creating this playlist. I was hopeful that without the auto-generated playlist MPC would have no reason to create the folder. Wrong. Now the folder is empty, but I still have to follow MPC around deleting all these blank folders. I use Media Player Classic on several of my computers so I think I just screwed up some variable somewhere somehow regarding where it stores playlists or something, but I can't figure out what it is, I've tried uninstalling and reinstalling to little avail. Which makes me think it might be in the registry. Does anyone have any ideas?

  Read the article

• Configure tomcat behind loadbalancer to respond on HTTP and HTTPS

  - by user253530

  I have 2 tomcat machines behind a load balancer on Amazon EC2. Until now The load balancer was configured to respond only on https. So in order to access our services you would go to https://url. Tomcat was configured to listen on 8080 but the connector had additional params that would tell tomcat that it is behind a proxy and that it should respond on HTTPS 443. The connector looks like this: <Connector scheme="https" secure="true" proxyPort="443" proxyHost="my.domain.name" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" useBodyEncodingForURI="true" URIEncoding="UTF-8" /> What i would like to do is to open port 80 on the load balancer and basically allow traffic on HTTP and HTTPS. I've configured the load balancer to redirect all HTTP traffic to the tomcat machines on port 8088. I was thinking that i could define a new connector so that all HTTPS traffic goes to 8080 and HTTP to 8088. Unfortunately i did not succeed. Here is my connector <Connector port="8088" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" useBodyEncodingForURI="true" URIEncoding="UTF-8" /> Am I missing something? Thanks

  Read the article

• FTP issue - VSFTPd and connecting to from FileZilla

  - by B Tyndall

  I'm trying to connect to a CentOS Linux box that I have hosted on EC2 and I think I have everything configured correctly but when I try to connect I get this series of messages Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 2.0.5) Command: USER tyndall Response: 331 Please specify the password. Command: PASS ********* Response: 230 Login successful. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/home/tyndall" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing Not sure where to start troubleshooting this issue. Any ideas? Do I need to change any permissions? I would think this ID has the ability to see my own home directory. I am able to push/pull files from the command line version of FTP client working on Windows.

  Read the article

• How can I hide the Tool-bar in Emacs persistently?

  - by Sanoj

  I have installed emacs23 on Linux Mint 8. I would like to hide the toolbar, and I can do it with Options Show/Hide Tool-bar. But the Tool-bar comes back next time I start emacs. How can I hide it persistently?

  Read the article

• Ubuntu 11.04 and OpenLDAP - where is the config?

  - by Tom SKelley

  I've been asked to setup a multimaster LDAP environment on Ubuntu 11.04 - instead of a single master server. I cloned the master server and recreated it into two VMs. I am trying to follow the instructions on the OpenLDAP documentation here: http://www.openldap.org/doc/admin24/replication.html and it talks about modifying the cn=config tree within LDAP. The subdirectory tree appears to be there at: /etc/ldap/slapd.d/ and a slapcat -b cn=config drops out a load of config information. When I try to connect using a browser and the admin bind credentials: ldapsearch -D '<adminDN>' -w <password> -b 'cn=config' I get: # extended LDIF # # LDAPv3 # base <> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # search result search: 2 result: 32 No such object I don't see the config context when I connect via an LDAP browser either. I'm sure I'm missing something, but I can't see what it is!

  Read the article

• Amazon EC2, fastest way to get a node into an existing cluster

  - by imaginative

  I'm new to Amazon AWS. A lot of the time I hear about people folks spawning instances and almost instantly putting them behind a load balancer and into an existing cluster. In the traditional world of managed machines, this would include provisioning hardware, installing an OS, configuring the network on the machine and once the network is available, use a tool of your choice such as CFengine, Puppet or Chef to bootstrap the machine based on its class. It seems like there are "shortcuts" that are able to get a server of a particular class up and running in Amazon EC2. If I have a particular stack running on my server, such as erlang, tomcat6 etc.. what's the fastest way to get these up and running and hooked into Amazon's load balancer? From network, to software stack to kernel tuning? Is it a combination of creating an AMI then running a tool like Puppet against the new instance? Any idea

  Read the article

• How to retrieve all MySQL settings?

  - by Max Kielland

  I have a configured MySQL server (MySQL 5.1.47-community) that works perfect. I installed a second server (MySQL 5.5.15-community) to see if the new version of MySQL would work with my application before upgrading. When I run the application against the new server it behaves different. When I run it against the old server (MySQL 5.1.47-community) everything works perfect. I remember that I set some parameters through the MySQL prompt to accept larger result set and some other stuff, now I can't remember what I did. So my question is: Is there a way to transfer all the MySQL settings from one server to another? Thanks.

  Read the article

• How Do I Change the Windows7 LAN Proxy Config from the Command Line

  - by david.barkhuizen

  In Windows7, Is it possible to define/change the proxy config from the command line ? So, using the gui, I would go: Start Control Panel Network and Internet Internet Options Connections LAN Settings and then - enable/disable the proxy - define IP:port of proxy server But I would like to rather do this from the command line (so that I can run the command from a batch-file with a shortcut key - enabling me to switch proxy configs using a short-cut, rather than having to wade through the MS wizard). I've looked at using netsh.exe to change the settings for WinHTTP, but this seems to be thr wrong thing to do, as the WinHTTP setting do not appear to be related to the LAN settings. Much appreciated folks.

  Read the article

• Parse/Edit Apache conf files with Ruby?

  - by Josh

  I need to write some scripts to make changes to Apache conf files, namely to add/update VirtualHosts. I plan on doing this in Ruby. before I write my own, are there any scripts/rubygems which allow Ruby to parse/modify Apache conf files, specifically <VirtualHost> directives?

  Read the article

• How to make ssh/rsync/etc use a VLAN network interface?

  - by Annan

  A company I work for has a number of virtual servers with ElasticHosts. They are setup in such a way that eth1 is on a private VLAN connecting them to each other. This is so backups sent between servers are not charged at the same rate as external data transfer. My understanding of how VLANs and network interfaces work is sketchy at best. How can I make ssh, rsync, etc. transfer data through the VLAN? My final solution: I spent a while trying to figure this out, For all servers involved, edit /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static ONBOOT=yes HWADDR=YOUR_MAC_ADDR IPADDR=192.168.0.100 NETMASK=255.255.255.0 Where HWADDR should already be set and the last octate of IPADDR should be different from each other. Then run, on all servers /etc/init.d/network restart After this the IP addresses specified by IPADDR can be used directly as any other IP address.

  Read the article

• Change lxadmin watchdog frequency of testing services

  - by Tomaszs

  I had lxadmin, now I have only some remains of it. I don't have any admin panel for lxadmin. But I have watchdog that takes care of restarting services that go down. It checks services once per 2 hours. Do you know what to do to make watchodog restart services faster?

  Read the article

• Can't bring NAT to work

  - by user31738

  Hello, I bought a D-link DIR-300 wireless router and i can't bring NAT to work, i have an ssh and http service i need to forward to the internet. My connection is as follows: I have an ADSL connection, i'm using a ADSL ethernet modem connected and working, it doesnt let me put it on bridge mode. I have my router connected to my adsl modem through ethernet, it gets its ip through DHCP (and i'ts always the same) I have a desktop computer running linux with apache and openssh configured and working, it has fixed ip. I configured the NAT in the modem forwarding port 22 from the router ip to the internet. In the router i setup NAT forwarding port 22 from the desktop computer fixed ip to out there. This setup already worked with a fonera i had before, can anyone help me with this or tell me what kind of tests do i need to do? How can i test if the router is forwarding ports correctly before the modem?

  Read the article

• Asterisk Connection not working

  - by Tamas Ionut

  I have installed Asterisk on VirtualBox by following the steps from here. Everything went ok until I got to navigate to an IP to configure Asterisk using FreePBX: 10.0.2.15 (Shouldn't be something like 192.168.x.y?? ). However, when I navigated to that url from outside of VirtualBox, that url pointed to nothing. Also I am logged in as root@localhost. Should I be logged in as root@server? I have also validated the installation as described here and everything went well. I am a complete beginner at Asterisk.

  Read the article

• Book recommendation for learning server management and Apache

  - by japancheese

  Hello, I'm currently managing a site that I feel could be optimized and utilized to be much faster, however, I'm having difficulty finding reliable information to do it. I find the Apache documentation to be a hard read, and too technical about things I don't have a strong grasp on. I'm just looking for a good beginner/intermediate book about server administration to learn as much as possible about Apache, as well as how to create a nice secure, robust server that doesn't crash at the first hint of unusual traffic surges. Thanks to anyone who can point me in the right direction.

  Read the article

• SQL Server Remote Connections

  - by Barry

  Hi, I am at my wits end with trying to access a remote SQL Server 2008 R2 Express instance. Here are the following that I have tried. 1) I enabled remote connections in the instance properties. 2) I enabled sql server and windows authentication mode and created an account to log in using sql server authentication. 3) I started the SQL Server Browser service 4) I forwarded ports 1433 and 1434 on the router to the IP address of the machine hosting SQL Server. 5) I turned off firewalls on both the Machine running the instance and the router. 6) http://www.yougetsignal.com/tools/open-ports/ I used this to check whether or not both ports were open and it says that they are closed. I have the SQL Server Express instance running and the browser running. I have configured it to allow remote connections yet, it tells me they are both closed. I'm pretty confused at this stage. On the client Machine I am trying to connect using the following format machineip\SQLEXPRESS with SQL Server Management Studio Express. Thanks in advance

  Read the article

• Problem in Installing Wordpress

  - by Hajloo

  I try to install Wordpress in a Windows Client with WebPI which provided by Microsoft. I had tostop installation process 3 time and installing PHP and mysql Extention manually. but everytime I continue setup by WebPi andfinally it show me a success message. But when I try to see installed wordpress in my client I see this Your PHP installation appears to be missing the MySQL extension which is required by WordPress. I asked it in StackOverFlow here but I couln't get the right answer. I install everything in **C:\Program files\** so these are the location C:\Program Files\MySQL\MySQL Server 5.1 C:\Program Files\Php C:\Program Files\ext mysql root password: admin wordpress database : wordpress wordpress database password : 123 here is my php.ini

  Read the article

• How to approach taking a very diverse hybrid network and making something lean and cohesive

  - by Gregg Leventhal

  I am going to have an opportunity (from the role of Linux Sysadmin) to work on optimizing a corporate server network that has a lot of different application servers from LAMP stacks to JBOSS to IIS based ASP/.NET systems of all sorts. I am interested to hear how you would approach evaluating and consolidating a network in a situation like this where you are walking in cold? What are some of your go-to techniques?

  Read the article

• Cfengine Perform action based on variable value

  - by Daniel

  In cfengine, I have a variable that is set to the output of a command. Let say variable myoutput is set to "hi world". How can I execute a command based on the contents of myoutput. I would like to do something like this (sudo cfengine code): bundle agent test { vars: "myoutput" string => execresult("echo 'hi world';","noshell"); commands: myoutput=="hi world":: "/usr/bin/php myaction.php"; }

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >