Search Results

Search found 5123 results on 205 pages for 'gateway timeout'.

Page 131/205 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

  • Network: Incoming connections work, outgoing fails

    - by anirvan
    i recently set up my own server at home to run Ubuntu 12.04 server ed. on booting up, i noticed that a message related to networking comes up, and the booting process pauses. the message read something like - waiting for network configuration and after a while - waiting another 60 seconds... on booting up, I realised that any command which requires a network connection was not working - ping, apt-get install, etc. on firing the ifup eth0 command, I get the error RTNETLINK answers: File exists. Failed to bring up eth0. I also realised, while searching the web for this problem, that this is probably one of the most common networking related issues - however, most of the questions are around setting up multiple IPs for the same machine. ifdown eth0 also fails, stating that eth0 is not configured. my /etc/network/interfaces file has a simple configuration for a static IP: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask xx.xx.xx.xx broadcast xx.xx.xx.xx gateway xx.xx.xx.xx dns-nameservers xx.xx.xx.xx The strangest part of this problem is that, while I can't connect to anything outside, I can ping to this particular server using the static IP configured in the interface file, and, i can even SSH into it! I'm really at ends here with this problem, and any guidance is much appreciated. Thanks!

    Read the article

  • Can't connect to Wireless Network - Ubuntu 12.04 LTS & Sabrent A111N USB Dongle

    - by Ohgodwhy
    I've been trying to connect to this network for quite some time. I can't directly connect to the router with a Wire, but can access the Router with other wireless devices without any issues. I had previously tried several other Wifi nic's but none of them would load properly. Today, i went and bought a new (supported) Sabrent A111N USB Dongle, which said explicitly that it works with Linux 2.4 +. I popped the Dongle in, and low-and-behold it immediately said that there were Available Wireless Connections. I selected my connection and tried to connect, but it just loops constantly while saying Wireless Disconnected then attempts to connect again over and over. ifconfig and iwconfig both show my device in a ready and working state. However, iwlist wlan0 scan says that there are no results found. I don't get it... At one point, I could see the CPU in the DHCP client list under the router, but it doesn't fully make the connection (something about a timeout?). Any help would be appreciated. Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

    Read the article

  • exception occurred for backend host '127.0.0.1/7001/7001': 'CONNECTION_REFUSED [os error=0, line 1715 of URL.cpp]: Error connecting to host 127.0.0.1:7001'

    - by Vijaya Moderator -Oracle
    When you hit the WLS Server via Proxy server, we may get the issue like below... [09/Jun/2014:06:05:50] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/0': 'PROTOCOL_ERROR [line 835 of URL.cpp]: Backend Server not responding' [09/Jun/2014:06:05:50] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/0': 'PROTOCOL_ERROR [line 835 of URL.cpp]: Backend Server not responding' [09/Jun/2014:06:05:51] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/7001': 'CONNECTION_REFUSED [os error=0, line 1715 of URL.cpp]: Error connecting to host 127.0.0.1:7001' To solve the issue 1.  Check if there is any issue at the firewall by executing the below command     telnet 127.0.0.1 7001 2.  Also access  using the hostname instead of IP Address  If it errors out like below   Microsoft Telnet> o 127.0.0.1 7001 connecting to 127.0.0.1  Warning thrown at weblogic console: <BEA-000449> <Closing socket as no data read from it on 127.0.0.1:54,356 during the configured idle timeout of 5 secs>  Test the same again by disabling the firewall. Below are the steps... 1)Go to Start ----> Run  2)Type services.msc  3)In services.msc search for "Windows Firewall" and Right Click on "Windows Firewall"---->Select Stop. 4)Access the Weblogic URL  If the issue is resolved after disabling firewall, Request your  OS System Admin to open the port 7001 at the firewall end to access the application

    Read the article

  • Ubuntu 12.04 LTS - Apple iPad 3 (iOS 7 non-jailbroken) USB connection problem

    - by Eldian
    I've bought an Apple iPad 3 (iOS 7 non-jailbroken), and I'm trying to connect it to my PC running Ubuntu 12.04 through the original USB cable. After I plugged in the cable, I got this message on the PC: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. Slide to unlock on iPad, it's OK, I got this message on the PC again: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. iPad: Trust this computer? TRUST/DON'T TRUST I've selected TRUST. PC: Unable to mount - DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) OK, I've read some forums, everywhere there was this solution: "Install: ifuse, libimobiledevice-utils, Rhythmbox OK, I've installed them through terminal, and used the idevicepair unpair && idevicepair pair command also in the terminal. Then I got this message: Device is not paired with this host. I don't know what to do. Please help!

    Read the article

  • How to connect ethernet on ubuntu (with auto-detection by Ubuntu)

    - by user12285
    Do I need to post another thread for the same? If so, sorry. Yes, I saw that it's been well over six months but I have the same router SmartAX MT880d with ethernet, and the exact same problem, that is no internet even though I can successfully reach the modem settings page by entering 192.168.1.1 in Firefox. Sorry if I don't use the right (technical) terminology to express my issue. English is not my mother tongue. I'm a total beginner with ubuntu. My internet works great in Windows but does not work in Ubuntu. For 2 weeks, I've kept reading on the web and forums and the ubuntuguide.org to name a few but to no avail. Now I see no other solution but to ask for help. My problem is that as a beginner, I can't find a way to put the right digits in the right place because I don't know what numbers I need to put in what files (eg: do I need to use DHCP? or a static IP address? No clue whatsoever. I'm confused between putting figures in the wrong spaces. For example, is the modem/router's IP exactly 192.168.1.1 for Huawei Smart AXMT880d modem?? Is the subnet 255.255.255.0? Gateway 192.168.1.1. I'm confused as I can also see a different IP starting with 155131*** (is it an account number? no clue again) on my contract with Huawei (a Chinese ISP). Apart from calling 911, what other numbers do I need to put in and where? How do I check that all the numbers have been entered correctly in every appropriate space before trying to connect the Internet?

    Read the article

  • Is Wordpress more appropriate than Magento/Opencart for site like this?

    - by Alex
    The premise of the site is that a user pays a small fee to advertise an item that they want to sell. Therefore the user is responsible for adding the "products", not the administrator. The product upload will create a product page for that item. This is a rather common framework that I'm sure you're familiar with. My initial thought was that it would be best suited using Magento - mainly because it needs to accept payments - and the products will grow to form a catalog of categorized products. However - there is no concept of a shopping cart. A buyer does not buy the item online, or go to a checkout. They simply look at the product, and contact the seller if they like it. The buyer and seller then take it from there. For this reason, I then begin to suspect that Magento is perhaps too overkill, or just simply not the right CMS if there is on checkout procedure (other than the uploader making a payment) So then I begin to think Wordpress....Hmmm Feature requirements: User's can add content via a form process User's can be directed to a payment gateway For each product listing - a series of photographs shall be displayed, in thumbnail form Zoom capabilities/rotate on the images would be a welcome feature In short - e-commerce CMS, or something more simple?

    Read the article

  • FTP gives me a error when uploading and deleting files [on hold]

    - by AR Games
    Here's the error I get when trying to delete files... Command: DELE index.html Response: 550 Delete operation failed. Here's the error I get when trying to upload files... Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Status: Connected Status: Starting upload of C:\wamp\www\.DS_Store Command: CWD /var/www/html Response: 250 Directory successfully changed. Command: TYPE A Response: 200 Switching to ASCII mode. Command: PASV Response: 227 Entering Passive Mode (76,185,76,101,78,222). Command: STOR .DS_Store Response: 553 Could not create file. Error: Critical file transfer error Status: Retrieving directory listing... Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 227 Entering Passive Mode (76,185,76,101,23,94). Command: LIST Response: 150 Here comes the directory listing. Response: 226 Directory send OK. Status: Directory listing successful Response: 421 Timeout. Error: Connection closed by server Status: Disconnected from server IM running windows OS and using filezilla FTP client

    Read the article

  • Ubuntu installed along side Win 8 but not shown in boot

    - by Mahesha999
    Actually the question says it all, but let me tell you what I did, so u may find exactly what might have went wrong: I have Win 8 installed on 500 GB HDD. SO I shrunk it four times for: partition 1 - the original partition containing Win 8 sys (118GB) partition 2 - NTFS formatted for my data (188GB) partition 3 - NTFS formatted for my data (100GB) partition 4 - NTFS formatted for Linux distro 1 (I reformatted it to ext4 during Ubuntu installation) (25GB) partition 5 - NTFS formatted for Linux distro 1 (21GB) So now I booted Ubuntu from USB (created from ubuntu-12.04-desktop-amd64.iso) and deleted last two partitions 4 and 5 to create: partition 1 - ext4 where I installed Ubuntu (25GB) partition 2 - Swap (4GB) partition 3 - unallocated space, not formatted yet (17GB) Ubuntu installation said it installed successfully and that I have to restart to boot in Ubuntu. But when I restart Windows 8 auto booted - there was no dual boot. After that I devided above 100GB partition to 80Gb and 20GB ones (since I read online that I should have /home in separate partition for convenience, so I created 20GB partition for it) So I went on to manually create boot entry using EasyBCD as below show in picture at below link http://s19.postimage.org/dof2zuvw3/Free_BCD.png When I created the entry, FreeBCD showed the information as follows: Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} integrityservices Enable default {ea8167ad-d189-11e1-90e4-ab2f09569dcc} resumeobject {ea8167a3-d189-11e1-90e4-ab2f09569dcc} displayorder {ea8167ad-d189-11e1-90e4-ab2f09569dcc} {ea8167b1-d189-11e1-90e4-ab2f09569dcc} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {ea8167ad-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \Windows\system32\winload.exe description Windows 8 locale en-US osdevice partition=C: systemroot \Windows resumeobject {9bc7fdf7-3ae0-11e2-be77-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {ea8167b1-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu Notice the last bolded entry created. Howevever after thet, when I rebooted it firstly showed old DOS like bootloader (no Windows 8 UI based bootloader) with two entries Windows and Ubuntu. Windows 8 was booting correctly but I was getting an error while booting Ubuntu taking me to GRUB Rescue. Please help am new to Linux world.

    Read the article

  • Software Center Freezing on Xubuntu 12.10

    - by AC3
    Whenever I open Software center I get this error: 012-12-12 16:19:29,196 - softwarecenter.fixme - WARNING - logs to the root logger: '('/usr/lib/python2.7/dist-packages/dbus/proxies.py', 410, '_introspect_error_handler')' 2012-12-12 16:19:29,196 - dbus.proxies - ERROR - Introspect error on :1.74:/com/ubuntu/Softwarecenter: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. 2012-12-12 16:19:54,713 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None' 2012-12-12 16:19:54,816 - softwarecenter.db.database - INFO - open() database: path=None use_axi=True use_agent=True 2012-12-12 16:19:55,705 - softwarecenter.region - WARNING - failed to use geoclue: 'org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Geoclue.Master was not provided by any .service files' 2012-12-12 16:19:56,575 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file 2012-12-12 16:19:56,592 - softwarecenter.fixme - WARNING - logs to the root logger: '('/usr/lib/python2.7/dist-packages/gi/importer.py', 51, 'find_module')' 2012-12-12 16:19:56,592 - root - ERROR - Could not find any typelib for LaunchpadIntegration 2012-12-12 16:19:56,910 - softwarecenter.ui.gtk3.app - INFO - show_available_packages: search_text is '', app is None. 2012-12-12 16:19:56,935 - softwarecenter.db.pkginfo_impl.aptcache - INFO - aptcache.open() Not sure if it is a bug or not, have uninstalled and reinstalled the program already with synaptic. Very little experience with linux and any help will be appreciated

    Read the article

  • How to make ip Address static (eth0)

    - by Jordan Angelucci
    I'm having a really hard time configuring ubuntu 13.04 to have a static ip address. I have tried multiple solutions but everytime I reboot (can't do the network reset command because ubuntu freezes) I end up with no connection. Here is what I get when i type ifconfig into the terminal: eth0 Link encap:Ethernet HWaddr 10:bf:48:bc:07:cb inet addr:192.168.0.8 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::12bf:48ff:febc:7cb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1763067 errors:0 dropped:0 overruns:0 frame:0 TX packets:1024326 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2284491220 (2.2 GB) TX bytes:136809317 (136.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1840 errors:0 dropped:0 overruns:0 frame:0 TX packets:1840 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:185688 (185.6 KB) TX bytes:185688 (185.6 KB) I have also tried this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.160 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 24.222.0.94 dns-nameservers 24.222.0.95 If anyone could help me it would be very much appreciated.

    Read the article

  • Ubuntu Server 12.04 as a router. Problem with DNS?? Or Routing table?

    - by Lorenzo
    I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

    Read the article

  • How to create a bootable system with a squashfs root

    - by cldfzn
    My goal is to be able to take a customized root file system loaded with the software I want. So far I've created a squashed filesystem using debootstrap and chroot to install the software I want on the system. The problem I am now running in to.. whenever I boot in to the system, my user accounts that were set up in the chroot do not work. First boot everything works out, second boot I can't log in. That is baffling to me. Any one know a reason or a place to start looking? Update To get a working system with a squashfs filesystem: sudo apt-get install live-boot live-boot-initramfs-tools extlinux sudo update-initramfs -u Create a squashfs file from a bootstrapped or running ubuntu filesystem with whatever packages you want available. https://help.ubuntu.com/community/LiveCDCustomizationFromScratch provides good instructions for creating a debootstrapped system to build on. Format the target drive with ext2/3/4 and enable the bootable flag. Create the folder layout on the target drive and install extlinux: mkdir -p ${TARGET}/boot/extlinux ${TARGET}/live extlinux -i ${TARGET}/boot/extlinux dd if=/usr/lib/syslinux/mbr.bin of=/dev/sdX #X is the drive letter cp /boot/vmlinuz-$(uname -r) ${TARGET}/boot/vmlinuz cp /boot/initrd.img-$(uname -r) ${TARGET}/boot/initrd cp filesystem.squashfs ${TARGET}/live Create ${TARGET}/boot/extlinux/extlinux.conf with the following contents: DEFAULT Live LABEL Live KERNEL /boot/vmlinuz APPEND initrd=/boot/initrd boot=live toram=filesystem.squashfs TIMEOUT 10 PROMPT 0 Now you should be able to boot from the target drive in to your squashed system.

    Read the article

  • Wifi won't connect to certain networks

    - by Dave M G
    As I write this, I'm in a coffee shop on my laptop, and I am trying to connect to the free wifi network they offer. Every time I select their network from the wifi applet drop down menu, it connects for a second and then disconnects. At the same time, I have my Android phone with me, and it connects to the coffee shop's network without problem. There are a couple of people around me also using the same network with no issues. I asked the staff to check and as far as they can tell there is no problem with their router or anything. I have tried rebooting, but it has not made a difference. I have double and triple checked that I am using the correct WEP password. As an added wrinkle, when I connect to another network, it seems to connect (although I can't use them because they are paid gateway services). So I'm able to ask this question now because I have tethered my laptop to my phone, but it's slow and a workaround, not a solution. All indications are that it's a problem with my computer against this one network. Why would that be and how can I fix it?

    Read the article

  • How do I turn off PCI devices?

    - by ethana2
    With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

    Read the article

  • 301 redirect from HTTP to HTTPS - how to be sure Google is fetching the correct information?

    - by user33692
    I'm hoping somebody might be able to provide a bit of advice on an issue I am having. I have one site where we implemented a 301 redirect on the homepage from HTTP to HTTPS. We have links on the homepage to other parts of the site that are not under SSL (in fact there is only one other page under SSL). When I go to our Webmaster Tools account I notice that we are not being provided with any webmaster information (e.g., search queries, backlinks, etc...) related to our homepage under SSL. I performed a Fetch as Google on the homepage and the information it returned is: HTTP/1.1 301 Moved Permanently Date: Fri, 08 Nov 2013 17:26:24 GMT Server: Apache/2.2.16 (Debian) Location: https://mysite.com/ Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 242 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/html; charset=iso-8859-1 <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>301 Moved Permanently</title> </head><body> <h1>Moved Permanently</h1> <p>The document has moved <a href="https://mysite.com/">here</a>.</p> <hr> <address>Apache/2.2.16 (Debian) Server at mysite.com</address> </body></html> I am worried by the fact that Google fetch is not getting the correct Title tags and Meta information from our homepage and that this is hurting our search results. Additionally, I am worried that we need to do something specific with the sitemap to ensure that Google is correctly indexing all our pages and being able to flow from the HTTPS to the HTTP without issues. Does anybody have any advice on how we can correctly set this up or be sure that Google is fetching the correct information?

    Read the article

  • ubuntu 12.04 installer does not recognize drive partitions

    - by endless forms
    I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

    Read the article

  • New Versions of Whitepapers are available

    - by Anthony Shorten
    The set of whitepapers that are available are progressively being updated and republished to reflect new versions of the products as well new advice for existing customers. A number of whitepapers are now available that have been updated (the My Oracle Support Doc Id is indicated): What’s New in Oracle Utilities Application Framework V4 (Doc Id: 1177265.1) -  This has been updated for the latest facilities in Oracle Utilities Application Framework V4.1. Batch Best Practices (Doc Id: 836362.1) – This has been updated for newer advice including more details of how CLUSTERED mode works, how to migrate to CLUSTERED mode and some configuration examples to cover typical configuration scenarios. Oracle Utilities Application Framework Architecture Guidelines (Doc Id: 807068.1) – This has been updated to reflect additional architecture advice. Performance Troubleshooting Guides (Doc Id: 560382.1) – This has been updated for the latest facilities in Oracle Utilities Application Framework V4.1 and includes additional techniques that have been used by customers to track performance. The whitepapers apply to all Oracle Utilities Application Framework Products which at the present time includes: Oracle Utilities Customer Care And Billing (V2.x) Oracle Enterprise Taxation Management (V2.x) Oracle Utilities Business Intelligence (V2.x) Oracle Utilities Meter Data Management (V2.x) Oracle Utilities Mobile Workforce Management (V2.x) Oracle Utilities Smart Grid Gateway (V2.x) Additional whitepapers and updates will be posted as they are available.

    Read the article

  • How to connect Ethernet via a Huawei Smart AXMT880s modem (with auto-detection)?

    - by user12285
    It's been well over six months but I have the same router SmartAX MT880d with Ethernet, and the exact same problem : no internet, even though I can successfully reach the modem settings page by entering 192.168.1.1 in Firefox. I'm a total beginner with Ubuntu. My internet works great in Windows but does not work in Ubuntu. Sorry if I don't use the right (technical) terminology to explain my issue. English is not my mother tongue. For 2 weeks, I've been doing reading on the web and forums and the ubuntuguide.org to name a few, but to no avail. Now I see no other solution but to ask for help. My problem is that I can't find a way to put the right digits in the right place because I don't know what numbers I need to put in what files. E.g.: do I need to use DHCP? or a static IP address? No clue whatsoever. I'm concerned that I might put figures in the wrong spaces. For example, is the modem/router's IP exactly 192.168.1.1 for Huawei Smart AXMT880d modem? Is the subnet 255.255.255.0? Gateway 192.168.1.1? I'm confused as I can also see a different IP starting with 155131*** (is it an account number?) on my contract with Huawei (a Chinese ISP). Apart from calling 911, what other numbers do I need to put in and where? How do I check that all the numbers have been entered correctly in every appropriate space before trying to connect the Internet?

    Read the article

  • AngularJS dealing with large data sets (Strategy)

    - by Brian
    I am working on developing a personal temperature logging viewer based on my rasppi curl'ing data into my web server's api. Temperatures are taken every 2 seconds and I can have several temperature sensors posting data. Needless to say I will have a lot of data to handle even within the scope of an hour. I have implemented a very simple paging api from the server so the server doesn't timeout and is currently only returning data in 1000 units per call, then paging through the data. I had the idea to intially show say the last 20 minutes of data from a sensor (or all sensors depending on user choices), then allowing the user to select other timeframes from which to show data. The issue comes in when you want to view all sensors or an extended time period (say 24 hours). Is there a best practice of handling this large amount of data? Would it be useful to load those first 20 minutes into the live view and then cache into local storage something like the last 24 hours? I haven't been able to find a decent idea of this in use yet even though there are a lot of ways to take this problem. I am just looking for some suggestions as to what might provide a good balance between good performance and not caching the entire data set on the client side (as beyond a week of data this might not be feasible).

    Read the article

  • How can I speed up boot on one of my machines?

    - by Korneel Bouman
    I have a Gateway all in one machine (2 gig Intel Core 2 Duo T7250 dual core processor, 2 gig RAM - full specs) on which I installed 10.10. Once it has booted it's fine, but it takes forever to boot. This is what happens: 1. Boot starts with cursor flashing for about 10-15 seconds 2. Cursor disappears for 1.5 - 2 minutes 3. Cursor reappears, blinks a few seconds more, boot finishes in another 10 seconds 4. Login screen I have another machine with marginal better specs that boots up in no time (basically the above minus the two minute delay). Things I've done: enabled verbose mode for grub nothing is showing until after 2 minute pause. checked syslog last message before pause is a message from alsa saying the process is already running (or something similar... going from memory here...) It could be something sound related as the built in speakers are not working (sound card is recognized though and headphones work). Anyway, it's not the end of the world, but it's annoying and I'd like to know what's going on... Many thanks, and let me know if more info is needed.

    Read the article

  • Should Starting a Quick Game via Google Game Services be Iterated?

    - by user46727
    I have been following this tutorial for Google Play Game Services. I am a little unclear as to if the room matching algorithm should be looped or not. Can I just initialize this process once and let it time out? Or by iterating through it is it somehow rechecking it? If anyone had the approximate timeout that would be great as well. The problem stems from the fact that even when both phones are signing into the Game Services (at virtually the same time, my friend and I logged in), the room is not registering multiple people. One time my friend's phone even entered the game map, showing that he somehow was able to progress from the room initialization process. Relevant screen update methods which I am starting this matchmaking process: @Override public void update(float deltaTime) { game.options.updateTiles(); if(!isInitiated) { startQuickGame(); } } private void startQuickGame() { // auto-match criteria to invite one random automatch opponent. // You can also specify more opponents (up to 3). if(game.mGoogleClient.isConnected() && !isInitiated) { Bundle am = RoomConfig.createAutoMatchCriteria(1, 3, 0); // build the room config: RoomConfig.Builder roomConfigBuilder = RoomConfig.builder(Network.getInstance()); roomConfigBuilder.setMessageReceivedListener(Network.getInstance()); roomConfigBuilder.setRoomStatusUpdateListener(Network.getInstance()); roomConfigBuilder.setAutoMatchCriteria(am); RoomConfig roomConfig = roomConfigBuilder.build(); // create room: Games.RealTimeMultiplayer.create(game.mGoogleClient, roomConfig); // go to game screen this.mRoom = Network.getInstance().getRoom(); if(this.mRoom != null && this.mRoom.getParticipants().size() >= 2) { game.setScreen(new MultiGameScreen(game, this.mRoom)); isInitiated = true; } } else { game.mGoogleClient.connect(); } }

    Read the article

  • curl blocked at TMG firewall

    - by jemtube100
    i using TMG (threat management gateway) firewall at my web server. when i try to use Curl from outside, this firewall was blocked the connection. what rule/setting that i need to create at TMG to allow it. the error state as below : Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion. Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped. Access from a link: If there is a link to the page you are looking for, try accessing the page from that link. </UL> <HR color=#c0c0c0 noShade> <P id=L_defaultr_11>Technical Information (for support personnel)</P> <UL> <LI id=L_defaultr_12>Error Code: 403 Forbidden. The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. (12202)

    Read the article

  • Hosting woes

    Unfortunately quite a few people have noticed our recent hosting problems, but if you are reading this they should all be over, so please accept our apologies. Our former web host decided migrate to a new platform, it had all sorts or great features, but on reflection hosting wasn’t one of them. We knew it was coming, and had even been proactive and requested several dates on their migration control panel so I could be around to check it afterwards. The dates came and went without anything happening, so we sat back and carried on on for a couple of months thinking they’d get back to us when they were ready. Then out of the blue I get an email saying it has happened! Now this is what I call timing, I had client work to complete, a 50 minute presentation to write and there was a little conference called SQLBits that I help organise at the end of the week, and then our hosting provider decides to migrate our sites. Unfortunately they only migrated parts of the sites, they forgot things like the database for SQLDTS. The database eventually appeared, but the data didn’t. Then the data pitched up but without the stored procedures. I was even asked if I could perform a backup and send it to them, as they were getting timeout errors. Never mind the issues of performing a native backup on a hosted server, whilst I could have done something, the question actually left me speechless. So you cannot access your own SQL server and you expect me to be able to help? This site was there, but hadn’t been set as an IIS application so all path references were wrong which meant no CSS and all the internal navigation and links were wrong. The new improved hosting platform Control Panel didn't appear to like setting applications. It said it would, you’d have to wait 2 hours of course, then just decided not to bother after all. So needless to say after a very successful SQLBits I focused my attention on finding a new web host, and here we are again. Sorry it took so long.

    Read the article

  • Is it okay to just add a page or two PHP page to add some functionality to a Drupal site?

    - by Zaemz
    I'm not familiar with Drupal, really. I can dig around the admin interface and navigate the directories and find the files that I need to just fine as well. What I'm really not familiar with is adding modules or extending modules. The site currently takes an order and sets up recurring payments through Ubercart and uses Authorize.net as a gateway. Right now, when a payment fails, a single e-mail gets sent out to the admin. We'd like to extend it to send an e-mail to the user and let them change their payment information through another page on the site. Authorize has a service called Silent Post URL that basically just posts a carbon copy in XML to whatever URL you give it. We'd like to accept that XML, deserialize it, parse the data, send a notice to the user and give them the page for updating their information. So, I guess it'll be two PHP pages. One for the XML API call from Authorize.net, and then one for the page for the users' to update their payment information. Could I just create two simple pages each handling their own tasks, or should I check out properly extending a module? If it's appropriate for me to write up the pages and not have to hook them into the module, what would be the best way to handle setting up what needs to get done? (The most experience I've had with extending a PHP site has been hacking away at someone else' poorly constructed, custom framework, so if anyone has any good resources perhaps on PHP best practices that they could share through a PM or a comment, I'd appreciate It) (Also, I'm still getting the hang of Stack Exchange, so if this isn't appropriate please let me know. I'll delete it.)

    Read the article

  • How to post JSON object to a URL without cURL in PHP? [closed]

    - by empyreanphoenix
    I have written a send sms code which uses an available sms api. So, I need to post a string in the json(string in $json) format to a url(url specified in $url var), but I am getting the following error String index out of range: -1 I understand that the error arises when requesting for an index that isn't there, but I dont find how that applies in this case. Please help. Note: name1,name2 and name3 are sender name, phone number and content respectively. Thanks array ( 'method' = 'POST', 'content' = $data, 'header' ="Authentication:$key" . "timeout:50000"."ContentLength: " . strlen ( $data) . "\r\n" ) ); if ($optional_headers != null) { $params ['http'] ['header'] = $optional_headers; } $ctx = stream_context_create ( $params ); try { $fp = fopen ( $url, 'rb', false, $ctx ); $response = stream_get_contents ( $fp ); echo "response"; } catch ( Exception $e ) { echo 'Exception: ' . $e-getMessage (); echo "caught"; } echo "done"; return $response; }

    Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >