Search Results

Search found 16499 results on 660 pages for 'off'.

Page 131/660 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• OCZ Vertex 3 SSD boot failure

  - by Col Zero

  Ok, so I just purchased and received a 120GB OCZ Vertex 3. I had Windows 7 on an .ISO file on my computer. I formatted a USB stick and configured it to be read as a CD so that I could install windows onto my SSD from it. I started my comp, had the boot priority set to my USB, starting installing windows 7 to my SSD. And out of no where (I wasn't watching) my computer restarted and it brought me back to the beginning of the Windows 7 set-up. So I turned my computer off and booted it up from the SSD to see if it had installed onto the SSD. The first 2 attempts I had a disk boot failure. So I plugged my hard drive back in, started my computer, turned it off, plugged the SSD back in (literally) and it booted up fine/ Finalized windows got internet set up, and Windows had updates that required a restart. So I restarted and had another disk boot failure. Now I have a disk boot failure every time I try to start my computer up through my SSD. Extra Info: My SSD has never been able to be detected in my BIOS unless my Hard Drive was unplugged (eve then my BIOS didn't always detect it). MY SSD wasn't detected in my BIOS the first and only time it successfully booted up. My SSD literally boots up successfully randomly (only once unfortunately) and is detected in my BIOS randomly. I've tried switching cords etc and nothing has worked. I just want to get this damn thing running so I can see whats its like. I finally found a way to get the OS on this sucker and now it won't even boot up. Any help appreciated

  Read the article

• switchless Infiniband between two servers on RHEL 6.3

  - by exfizik

  I have 2 servers running RHEL 6.3 which have 2 port Infiniband cards >lspci | grep -i infini 07:00.0 InfiniBand: QLogic Corp. IBA7322 QDR InfiniBand HCA (rev 02) I'm interested in connecting them directly to each other bypassing an Infiniband switch (which I don't have). Quick googling showed that at least in some configurations it's possible. I installed all RedHat Infiniband packages with yum groupinstall "Infiniband Support". However, ibv_devinfo shows that both ports in each card are down, which indicates that cables are not connected. But the cable is connected, although the LEDs are off on the cards (not a good sign). Another source of confusion for me is that according to this, RedHat doesn't come with OFED packages and I'm slightly hesitant to install them from source due to the lack of RedHat support for them... So where am I going with this? The questions I have are: is it possible to have a switchless/direct Infiniband connection between two servers the way I described above? If it's possible, do I have to use the OFED packages or can I configure everything with just the packages coming with RHEL. Why are the LEDs off on my servers even though the cable is connected? Any additional input/advice/pointers would be appreciated. P.S. I followed this guide for installation instructions. The Infiniband cards are clearly recognized by my OS and the rdma service is running. Update: I have opensm installed. When I run it it says: OpenSM 3.3.13 Command Line Arguments: Log File: /var/log/opensm.log ------------------------------------------------- OpenSM 3.3.13 Entering DISCOVERING state Using default GUID 0x1175000076e4c8 SM port is down and stays at that point.

  Read the article

• external drive enclosure -> software RAID 5?

  - by memilanuk

  Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

  Read the article

• HP Procurve Issue Passing Multiple VLANs over a link

  - by MichaelRwat

  Just to start off with I am a Cisco guy that got placed into an HP project. Basic topology overview from outside in: ASA 5505 with two Ethernet connections to a 2910-24 port switch. This switch is then (Cisco Trunking) to a 2626 switch passing vlan (1 untagged and 100 tagged)between them. I created SVI's on each of the switches for both VLAN's for testing purposes. I can not get vlan 100 to pass across this link. I also have trunks configured to AP's off of the switch and can not ping the vlan 100 BVI on the AP's but can reach the vlan 1 BVI. Port 25 on Access layer (2626) connects (trunks) with port A1 of 2610. STP is not running at all on any switch (this is not my network I can't change this nor did I design this) Distribution Sw: MP1-0# show run ip default-gateway 10.100.100.100 vlan 1 name "DATA" untagged 1-22,24-A1,B1 ip address 10.100.100.6 255.255.255.0 no untagged 23 exit vlan 100 name "GUEST" untagged 23 tagged 24-A1 ip address 10.100.102.6 255.255.255.0 exit Access Sw: ip default-gateway 10.100.100.100 vlan 1 name "DEFAULT_VLAN" untagged 1-26 ip address 10.100.100.5 255.255.255.0 exit vlan 100 name "GUEST" ip address 10.100.102.5 255.255.255.0 tagged 15,25 exitt From the ASA I can ping the vlan 100 address of the 2610 but not the 2626 (10.100.102.6)[Not passing the "trunk"] If I plug into an access port vlan 100 of the 2626 I can ping the SVI for vlan 100 as intended. I can not ping across the "trunk" over vlan 100 but I can across vlan 1. There may be something obvious I'm missing but please review my configuration and thank you for the assistance.

  Read the article

• Can't connect to a Hyper-V VM from anywhere but the host OS

  - by Elbelcho

  I have an unusual situation on hand where I'm able to connect to a Hyper-V guest VM from the HOST, but not from anywhere but the host. The VM is running WIn2k8R2 and has IIS installed and Remote Desktop enabled. If I browse to the IP from the host OS, the IIS7 page displays. I can also RDP into the guest OS from the host as well as ping. From OFF the host, RDP, web and ping all fail. If I completely shut off the guest VM's firewall, ping will then start to respond, but all RDP and port 80 still don't. The physical host machine has 2 nics installed, but only one is plugged in. The one plugged in has a static IP. I have one Hyper-V virtual network and it's set to external. The guest VM has one NIC with a different static IP than the host, but both are on the same subnet. The host machine is joined to the domain, the guest VM is not. Any sugestions? Thanks so much for any help you may be able to provide!

  Read the article

• Apache mod_rewrite and mod_vhost_alias Virtual Hosts and %1

  - by Matt Wall

  I have put the main bits of my httpd.conf down below. I am using %1 to get the host field so I can dynamically add vhosts by just creating dns/folders. One problem is I need to reference this: HttpStreamingLiveEventPath "D:/FMSApps/%1" HttpStreamingContentPath "D:/FMSApps/%1" In Apache when I try say to do this: http://test.domain.com/hds-vod/myfile.mp4.f4m it sees the %1 in the logs, and fails. Apache gives me this: [error] mod_jithttp [403]: No access to D:/Content/%1/DefaultContent/eve.mp4 What I'm looking for is the D:/Content/%1/DefaultContent/eve.mp4 to become D:/Content/test/DefaultContent/eve.mp4 Anyone have any useful resources / hints etc. to help me? Meanwhile my Google searching continues...! Listen 80 ServerName main1.rtmphost.com AccessFileName .htaccess ServerSignature On UseCanonicalName Off HostnameLookups Off Timeout 120 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 15 RewriteLogLevel 0 RewriteLog logs/rewrite.log DocumentRoot D:/Content LoadModule vhost_alias_module modules/mod_vhost_alias.so VirtualDocumentRoot "D:/Content/%1" RewriteEngine On <Directory /> Options None AllowOverride None Order allow,deny Allow from all Satisfy all </Directory> <IfModule f4fhttp_module> <Location /vod> HttpStreamingEnabled true HttpStreamingContentPath "D:/FMSApps/%1" Options FollowSymLinks </Location> Redirect 301 /live/events/livepkgr/events /hds-live/livepkgr <Location /hds-live> HttpStreamingEnabled true HttpStreamingLiveEventPath "D:/FMSApps/%1" HttpStreamingContentPath "D:/FMSApps/%1" HttpStreamingF4MMaxAge 2 HttpStreamingBootstrapMaxAge 2 HttpStreamingFragMaxAge -1 Options FollowSymLinks </Location> </IfModule>

  Read the article

• Ripping a home video VCD on Linux or Windows with VLC or otherwise

  - by user259774

  I have a VCD with 22 minutes of video on it. I would like to retain this footage and throw away the VCD. I can play the whole thing with VLC ("open disc - vcd - /dev/sr0 - play"): all 22 minutes of the main track. I don't believe there's any other content aside from the main track. I can seek to anywhere I want to within the 22 minute track. If I mount /dev/sr0 /media/vcd and then try to copy the only file from the MPEGAV folder, I get an I/O error, with an empty destination file. VLC has a "convert" option in addition to "play". When I use this I actually get a good OGG file back, after it runs through the video in painful real-time. I guess it dubs it frame-by-frame. But the file is only 10 minutes long, leaving 12 minutes off of the track. Handbrake doesn't detect it's track titles, unfortunately. I don't know if I should start getting involved with GNU ddrescue or if it's because VCDs somehow encode their data sectors differently. Anyway, I'm in way over my head and if anyone knows how I could get that video track off the thing, feel free to share! Edit: I should note that I also have access to a Windows computer

  Read the article

• Trouble with local id / remote id configuration of VPN

  - by Lynn Owens

  I have a NetGear UTM firewall and a Windows machine running NetGear's VPN client. The Windows machine I can put on the UTM network and take off of it. When I am cabled into the local (internal) the following configuration works: UTM: Local Id: Local Wan IP: (The UTM's WAN IP address) Remote Id: User FQDN: utm_remote1.com Client: Local Id: DNS: utm_remote1.com Remote Id: (The UTM's WAN IP address) Gateway authentication: preshared key Policy remote endpoint: FQDN: utm_remote1.com But when I'm off the UTM's internal local network and simply coming in from the internet, this does not work. It simply repeats SEND phase 1 before giving up. Since I know that the UTM WAN IP is accessible from both inside and outside the network, I figured the problem was with the Client local id. So, I tried the following: UTM: Local Id: Local Wan IP: (The UTM's WAN IP address) Remote Id: (A DN of a self-signed certificate I created for the client and uploaded into the UTM certificates) Client: Local Id: (The DN of the aforementioned self signed cert) Remote Id: (The UTM's WAN IP address) Gateway authentication: (the aforementioned self signed cert) Policy remote end point: ... er, ... my choices are IP and FQDN.... Not sure what to put here No matter what I've tried, it just keeps repeating the SEND phase 1. Any ideas?

  Read the article

• Dual Xeon Server voltages are low

  - by Mindflux

  I've got a whitebox server running CentOS 5.7. It's a Dual Xeon 5620, 24GB of RAM. The mainboard is a SuperMicro X8DT6-F and the chassis is a SC825TQ-R720LPB. Dual 720W Power supplies. We had a big power outage a couple weeks back that took down everything, I don't have any pre-power outage figures for this server, and the only reason I noticed these is because when I was bringing up the servers I was checking them out with more scrutiny than usual. http://i.imgur.com/rSjiw.png (Image of voltage readings) As you can see, CPU1 DIMM is low, +3.3V is high, 3.3VSB is high, +5v is high, +12v is REAL LOW (out of normal 5% (plus/minus))... and VBAT is off the charts. With my whitebox VAR we've tried the following: Swap out PSU with another server I have with the same PSUs. Try different power cord Update BMC/IPMI firmware in case readings were wrong (They aren't) Update BIOS Try different PDU Try a different outlet and/or circuit Replaced Voltage Regulator Unit At this point, the only thing we haven't done, seemingly is replace the mainboard.. which is what the next step will be unless something else shines some light on the situation. I should mention the system is rock solid otherwise which is a surprise given the 12v voltage is that far off.

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• Computer does not switch on after power outage

  - by cristian

  VOLTAGE DROP OFF FOR PC does not restart The other day my pc was turned off due to power outage. Since that time the computer would not turn on again, no sign of life, it seems dead. I did several tests, changed the power outlet and disconnect the wires ... also I have reseated the cards ... but the result is that nothing changes. What can I do? Could there may be damage to the hardware due to the power outage? Note: the voltage drop is not due to a lightning storm and so is not due to damaged components (burnt card etc ...) Original Text: l'altro giorno il pc mi si è spento improvvisamente per calo tensione.... da quel momento non si è piu' riacceso...nessun segnale di vita...sembra proprio morto. Ho fatto diverse prove, cambio presa di alimentazione, scollegare i fili...insomma ho "mischiato le carte"...ma il risultato è che non cambia nulla. Cosa posso fare? cosa puo' essere successo? Possono esserci danni hardware per il calo di tensione? NB: il calo di tensione non e' dovuto ad una saetta e quindi escluderei danni causa temporale (bruciature scheda ecc...) Grazie mille

  Read the article

• Jira access with AJP-Proxy

  - by user60869

  I want to Configure the Jira-Acces over APJ-Proxy. I proceeded as follows (Following this howto: http://confluence.atlassian.com/display/JIRA/Configuring+Apache+Reverse+Proxy+Using+the+AJP+Protocol) : 1) In the server.xml I activate the AJP: 2) Edit VHOST Konfiguration: # Load Proxy-Modules LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so LoadModule proxy_http_module /usr/lib/apache2/modules/mod_proxy_http.so # Load AJP-Modules LoadModule proxy_ajp_module /usr/lib/apache2/modules/mod_proxy_ajp.so # Proxy Configuration <IfModule proxy_http_module> ProxyRequests Off ProxyPreserveHost On # Basic AuthType configuration <Proxy *> AuthType Basic AuthName Bamboo-Server AuthUserFile /var/www/userdb Require valid-user AddDefaultCharset off Order deny,allow Deny from all Allow from 192.168.0.1 satisfy any </Proxy> ProxyPass /bamboo http://localhost:8085/bamboo ProxyPassReverse /bamboo http://localhost:8085/bamboo ProxyPass /jira ajp://localhost:8009/ ProxyPassReverse /jira ajp://localhost:8009/ </IfModule> EDIT: In the logs if found follow: //localhost:8080/ [Fri Nov 19 14:51:13 2010] [debug] proxy_util.c(1819): proxy: worker ajp://localhost:8080/ already initialized [Fri Nov 19 14:51:13 2010] [debug] proxy_util.c(1913): proxy: initialized single connection worker 1 in child 5578 for (localhost) [Fri Nov 19 14:51:32 2010] [error] ajp_read_header: ajp_ilink_receive failed [Fri Nov 19 14:51:32 2010] [error] (120006)APR does not understand this error code: proxy: read response failed from (null) (localhost) [Fri Nov 19 14:51:32 2010] [debug] proxy_util.c(2008): proxy: AJP: has released connection for (localhost) [Fri Nov 19 14:51:32 2010] [debug] mod_deflate.c(615): [client xx.xx.xx.xx Zlib: Compressed 468 to 320 : URL /jira But It dosen´t work. Somebody have an idea?

  Read the article

• Virtual bridged networking with VLAN, could not ping

  - by v.yegy

  I require a virtual network with VLAN be build between two virtual hosts - which can be (lxc/ vbox -ubuntu or win xp). I tried with lxc and vbox with Ubuntu and was finding difficult to make it work without vlan, but was successful with vbox with xp. vbox-xp1 --- br1 ---------------- br2 ---- vbox-xp2 The config is: brctl addbr br1; brctl addbr br2 ifconfig br1 up; ifconfig br2 up stp br1 off; stp br2 off ip link add name br1-br2-l0 type veth peer name br1-br2-l1 sudo brctl addif br1 br1-br2-l0 sudo brctl addif br2 br1-br2-l1 vbox - xp 1 and 2 with network ; bridged and br1 and br2 respectively. The adapter is intel PRO/1000 MT Server and driver installed in guests. Configured IPs and two hosts pinged! VLAN config: ip link add link br1 name br1-2.5 type vlan id 5 brctl addif br2 br1-2.5 create vlan 5 in xp 1 and 2 and assign ip address Ping on with this config does not work. Wireshark trace on interface br1-br2-l1 / br1-2.5 shows that one ping results in ~240 ping packets and each growing by 4 bytes - first one being correct and 60, ping does not reach other host as I see mac is not learnt[arp -a]. -- if br1-2.5 is not configured, I see untagged packets in br1-br2-l1/0, but still not reaching other host as mac is not learnt. if br1-br2-l0/1 is made down, even if br1-2.5 is up, I count not see any packets. I tried with ebtables, but still could not make a correct config to work. -- If any one here are aware of any configuration, please let me know. I need to make a network of switches. Seems I have a very long way. Sorry for a very long question. Thanks and regards, vy

  Read the article

• Keynote presentation in conjunction with other app?

  - by Sören Kuklau

  The short version: I'd like to tell Apple Keynote to switch to a specific app (never leaving full-screen mode) before a certain slide appears, then display that slide as soon as I switch back. Some more details: I'm going to show off five major improvements in an upcoming release of our app. I want one slide highlighting the feature, then one or two showing some details, perhaps with screenshots. After that, so people get a better impression of what I'm talking about, I'll show it off live — to do this, I have to switch to a VM or remote session (since this is a Windows app). Then, I'd like to switch back and go to the next feature. I.e., it would be similar to Apple's "Demo" slides in a cursive font, except not with a different screen, or different computer. It's this switching back and forth that I want to make smooth, just to wow the audience a little. Can I perhaps do a "special" slide in Keynote that tells it to run an AppleScript? Better yet, to switch to an app, and wait until I switch back, and then automatically advance to the next slide?

  Read the article

• How to add another application to apache?

  - by Jader Dias

  I was following the Zabbix installation tutorial for Ubuntu and it requested that I added a file /etc/apache2/sites-enabled/000-default containing Alias /zabbix /home/zabbix/public_html/ <Directory /home/zabbix/public_html> AllowOverride FileInfo AuthConfig Limit Indexes Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec <Limit GET POST OPTIONS PROPFIND> Order allow,deny Allow from all </Limit> <LimitExcept GET POST OPTIONS PROPFIND> Order deny,allow Deny from all </LimitExcept> </Directory> But I already have /etc/apache2/sites-enabled/railsapp NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:80> UseCanonicalName Off Include /etc/apache2/conf/railsapp.conf </VirtualHost> <VirtualHost *:443> SSLEngine on SSLCertificateFile /etc/ssl/certs/cert.pem Include /etc/apache2/conf/railsapp.conf RequestHeader set X_FORWARDED_PROTO 'https' </VirtualHost> and /etc/apache2/sites-enabled/mercurial NameVirtualHost *:8080 <VirtualHost *:8080> UseCanonicalName Off ServerAdmin webmaster@localhost AddHandler cgi-script .cgi ScriptAliasMatch ^(.*) /usr/lib/cgi-bin/hgwebdir.cgi/$1 </VirtualHost> I think that it is because of the already existing virtual hosts that my I can't access the zabbix page. How to circumvent this?

  Read the article

• Proxy to either Rails app or Node.js app depending on HTTP path w/ Nginx

  - by Cirrostratus

  On Ubuntu 11, I have Nginx correctly serving either CouchDB or Node.js depending on the path, but am unable to get Nginx to access a Rails app via it's port. server { rewrite ^/api(.*)$ $1 last; listen 80; server_name example.com; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_pass http://127.0.0.1:3005/; } location /ruby { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_pass http://127.0.0.1:9051/; } location /_utils { proxy_pass http://127.0.0.1:5984; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_buffering off; # buffering would break CouchDB's _changes feed } gzip on; gzip_comp_level 9; gzip_min_length 1400; gzip_types text/plain text/css image/png image/gif image/jpeg application/x-javascript text/xml application/xml application/x ml+rss text/javascript; gzip_vary on; gzip_http_version 1.1; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; } / and /_utils are working bu /ruby gives me a 403 Forbidden

  Read the article

• HTPC/DVR computer won't go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• Opening and Testing Ports on Modem > Router Connection

  - by JakeTheSnake

  Working off of my last question, I can access my server's FTP over the LAN but not over the internet. I'm using Filezilla on port 666. My router/modem configuration is as such (similar to other post): 1) Modem connects to WAN 2) WAN port on modem connects to LAN port on Router 3) Modem internal IP address is 192.168.0.254 4) Router internal IP address is 192.168.0.1 5) Modem has DHCP turned OFF 6) Router has DHCP turned ON 7) Router is running Tomato firmware and it's set as 'Router' (not 'Gateway') 8) The internet is working (just had to say that) I've set up port forwarding both on the modem and router - both route port 666 to the IP address of 192.168.0.3 (TCP); that is the IP address of the server which has FileZilla running. I don't know if that's hindering anything but I've also tried it with just the modem and just the router...same result. I've also tried setting the server to be DMZ (both on router and modem). Neither router nor modem have anything in their logs about denying inbound traffic on port 666 so my ability to troubleshoot stops there. I've tried contacting my ISP (Telus, running on mobility plan...it's a "Smart" Hub) but they weren't much help. They said they only block port 25 and 80 and maybe a few others, but not most ports. I test whether or not the port is open by going to canyouseeme.org - I don't know whether or not that would produce a 'connection refused' result just based on the fact that the FTP requires a login...I'm not well versed on this matter. FWIW, sometimes I get a 'connection refused' error on canyouseeme.org but mostly it's 'connection timed out'. I don't know what else to do at this point.

  Read the article

• I can't download or stream for more then 3 sec, and then the conection activity just dies

  - by JMHein

  Just got a new internet connection installed at my sisters place, but it randomly just stops working. At first it was only affecting flash videos. they would randomly just stop buffering. I did a lot of research on this and found that there can be many things that cause this exact trouble. I then tried IE and some flash would stream fine, but still random deaths. So I told my brother in law to reset the router and modem and that fixed the problem for them but not my laptop. I then started trying to fix the flash problem only to fined that downloads of any kind were affected. Now it is so bad that 50% of page loads will never finish because the connection drops to 0% usage with in a split sec. I can't get flash reinstalled because the installer is trying to download but the download dies at 8% I tried up loading a large file by FTP to a web server with no troubles. Yet any activity on my end that takes longer then about 1 sec to finish, just never finishes I can watch the network log in the taskmanager and it spikes for ruffly one sec then drops back to zero and when I go back to the web page it says it is still loading and no matter how long I let it sit it never does any thing more till I reload then it will again create a very short spike of activity on the connection and then drop to zero. Also if I start a download and it does drop off I can restart the download where it left off and get up to 100Kb/s for around the same one sec then it drops to around 14Kb/s then zero a sec latter... I am running Win 7 home prem x64 with FF11 and IE8 I have simply tried every thing I can short of calling up the ISP which very likely will get me no where fast. any advice on what step to take to figure this out would be nice. I am not even sure it is not just an ISP problem. (at least I should be able to get flash reinstalled once I get back home)

  Read the article

• why adding router will hide all share folders

  - by user1285419

  I have several computers running winxp installed in my office, they are all connecting to the WAN providing by the building (wall socket) (DHCP, mask 255.255.252.0). I setup a shared folder in my computer so all other computer in the same group could access it. This configuration have been using for long time. Recently, I am trying to setup a router. I have the WAN port of the router go to the wall socket, connect the NIC to the LAN port of the router, setup the router in DHCP mode (192.168.0.100/255.255.255.0 to 192.168.0.110 /255.255.255.0), I turn off all the firewall (windows one and router's builtin one), the NIC has ip set as DHCP. If I ipconfig/all, I see that the NIC was assigned ip 192.168.0.100. I can access the internal, email whatever. However, the shared folder can no longer be accessed by other computers in the same group. I think it is the problem of ip. But what's really weird is if I turn off the DHCP function in the router, ipconfig/all always give 0.0.0.0/255.255.255.255 and I cannot access the internet. I have no idea what's going on. Anyone know how to fix it and allow the shared folder in application of router? Thanks.

  Read the article

• UPS with a HP Proliant server

  - by Groo

  We placed a EATON Ellipse Max 1500 (900W) as the UPS for our HP Proliant ML350 G6. Upon first power failure (actually we only moved the UPS' input plug to a different socket), server immediatelly turned off, and the Health LED turned red and started blinking. UPS was in operation for about a week before that, with battery fully charged to 100%. Since our server's hot-plug supply is 460W, we are pretty sure we haven't overloaded it, the server was completely idle at that time (no web or win apps running except Windows Server core services). Then we tried to do the same with a different, no-name older PC (Core 2 Duo, 2Gb RAM) with a generic power supply (not sure what the power is) and it continued working when we pulled the plug out. UPS load was less than 15% (measured in the provided Eaton utility). We measured the UPS' output voltage using a smart oscilloscope and the THD of the UPS output waveform turned out to be 40%. Did you have similar experiences? Could this be a faulty UPS? Or a faulty power supply? Or some HP sensors configured to trigger too strictly? I wouldn't like replacing this UPS with the same brand, to get same results. [Edit] I also tried to do this while the server is turned off. While the UPS is working on battery, server will not start - as soon as I press the power button, Health LED starts blinking red.

  Read the article

• Remote Desktop Session Black after Minimize

  - by TorgoGuy

  PROBLEM: When I minimize a remote desktop session and restore it, the remote desktop screen shows up black. This only happens when connecting to a particular computer. DETAILS: If I start clicking around in the black area, portions of the screen will start redrawing and showing up correctly. For example, if I leave a window open in the remote session and click where that window is located on the remote computer, then that window--and only that window--will redraw, and sometimes a portion of that window won't redraw (usually the toolbar). And to clarify--the window only has to be minimized momentarily, so it doesn't seem to be a timeout issue. Clicking or typing in the remote session still causes the remote computer to respond appropriately. Disconnecting from the session and reconnecting restores the whole screen image, as does clicking all over the place in the black image (causing each section to redraw). CONFIGURATION: This problem only happens for me when connecting to a particular computer (a W2K Server box configured to allow remote administration) and only with certain client computers. I've tried 7 different client computers with various versions of Remote Desktop (the OSes were: Win2K, Server 2003, Server 2008, Windows 7 RC, 3 XP) and two of them exhibit the problem (one is one of the XP boxes and the other is Windows 7). Those same computers can RDP to other computers without problem. RESOLUTION ATTEMPTS: I have tried the following: Disable the LOCAL screen saver as mentioned on Technet Turned off bitmap caching in the client, as mentioned on many forums. Updated to version 6.1 of the remote desktop client Using mRemote (I doubted this would work since it uses MS's code for connecting to RDP servers) Turning off all video acceleration. QUESTION: Any ideas on what is causing this?

  Read the article

• Apache2 with lighttpd as proxy

  - by andrzejp

  Hi, I am using apache2 as web server. I would like to help him lighttpd as a proxy for static content. Unfortunately I can not well set up lighttpd and apache2. (OS: Debian) Important things from lighttpd.config: server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_proxy", "mod_status", ) server.document-root = "/www/" server.port = 82 server.bind = "localhost" $HTTP["remoteip"] =~ "127.0.0.1" { alias.url += ( "/doc/" => "/usr/share/doc/", "/images/" => "/usr/share/images/" ) $HTTP["url"] =~ "^/doc/|^/images/" { dir-listing.activate = "enable" } } I would like to use lighttpd in only one site operating as a virtual directory on apache2. Configuration of this virtual directory: ProxyRequests Off ProxyPreserveHost On ProxyPass /images http://0.0.0.0:82/ ProxyPass /imagehosting http://0.0.0.0:82/ ProxyPass /pictures http://0.0.0.0:82/ ProxyPassReverse / http://0.0.0.0:82/ ServerName MY_VALUES ServerAlias www.MY_VALUES UseCanonicalName Off DocumentRoot /www/MYAPP/forum <Directory "/www/MYAPP/forum"> DirectoryIndex index.htm index.php AllowOverride None ... As you can see (or not;)) my service is physically located at the path: / www / myapp / forum and I would like to support lighttpd dealt with folders: / www / myapp / forum / images / www / myapp / forum / imagehosting / www / myapp / forum / pictures and left the rest (PHP scripts) for apache After running lighttpd and apache2 working party, but did not show up any images of these locations. What is wrong?

  Read the article

• nginx inserting extra characters in Multi-status reply body

  - by user125011

  Here's the setup. I've got one server running apache/php hosting ownCloud. Among other things, I'm using to do CardDAV contact syncing. In order to make things work with my domain I have an nginx server running on the frontend as a reverse-proxy to the ownCloud server. My nginx config is as follows: server { listen 80; server_name cloud.mydomain.com; location / { proxy_set_header X-Forwarded-Host cloud.mydomain.com; proxy_set_header X-Forwarded-Proto http; proxy_set_header X-Forwarded-For $remote_addr; client_max_body_size 0; proxy_redirect off; proxy_pass http://server; } } The problem is that when my phone does a PROPFIND on the server, nginx adds extra characters to the content body that throw the phone off. Specifically, it prepends d611\r\n at the front of the body and appends 0\r\n\r\n to the end of the content. (I got this from wireshark.) It also re-chunks the result. How do I get nginx to send the original content as-is?

  Read the article

• Is it the address bus size or the data bus size that determines "8-bit , 16-bit ,32-bit ,64-bit " systems?

  - by learner

  My simple understanding is as follows. Memory (RAM) is composed of bits, groups of 8 which form bytes, each of which can be addressed ,and hence byte addressable memory. Address Bus stores the location of a byte of memory. If an address bus is of size 32 bits, that means it can hold upto 232 numbers and it hence can refer upto 232 bytes of memory = 4GB of memory and any memory greater than that is useless. Data bus is used to send the value to be written to/read off the memory. If I have a data bus of size 32 bits, it means a maximum of 4 bytes can be written to/read off the memory at a time. I find no relation between this size and the maximum memory size possible. But I read here that: Even though most systems are byte-addressable, it makes sense for the processor to move as much data around as possible. This is done by the data bus, and the size of the data bus is where the names 8-bit system, 16-bit system, 32-bit system, 64-bit system, etc.. come from. When the data bus is 8 bits wide, it can transfer 8 bits in a single memory operation. When the data bus is 32 bits wide (as is most common at the time of writing), at most, 32 bits can be moved in a single memory operation. This says that the size of the data bus is what gives an OS the name, 8bit, 16bit and so on. What is wrong with my understanding?

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >