Search Results

Search found 4141 results on 166 pages for 'router'.

Page 131/166 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• Block complete network access for one local user

  - by tumchaaditya

  Well, this is quite trivial question but I could not find a satisfactory answer even after trying many search queries both here and on Google. I want to share my PC with my room-mate. And I don't want him to access ANY network(LAN included). So, I can create an account for him and block network access for the same. I would prefer avoiding any third-party tools as far as possible. It's a simple home PC hooked up to a router for internet. No domain and other stuff. (Technically, guest account can achieve this. But somehow, the guest account on my PC has network access!)

  Read the article

• Domain redirection to port on Windows Server 2008

  - by Rauffle

  I have a Windows server running IIS. I wish to run a piece of software that hosts a web interface on a non-standard HTTP port (let's say, port 9999). I have static DNS entries on my router for two FQDNs, both of which direct to the Windows server. I wish to have requests to 'website1' to continue to go to the IIS website on port 80, but requests for 'website2' to instead go to port 9999 to be handled by the other application. How can I accomplish this? Right now I can get to the application by going to 'website1:9999' or 'website2:9999'.

  Read the article

• Server IP must be a LAN IP (Port Forwarding Netgear)

  - by rphello101

  I'm trying to set up a server (Apache) on my computer (fairly new to it). As I understand it, for it to be accessible to other computers, I need to forward port 80. When I try to forward the port though, I get the error: Server IP must be a LAN IP. I noticed in ipconfig that my default gateway is different than my wireless router. My computer is not hardwired, not on WiFi. Furthermore, I do not, at this point, have a static IP. I read that it should still work with a dynamic IP until it changes. Any ideas on what I can do?

  Read the article

• Need to know who is hogging my bandwidth?

  - by Dev

  I have an ethernet connection to my iMac and with Internet sharing I am broadcasting the wireless network from my mac rather than using a wireless router. I use it to connect other devices wirelessly to the internet. But this makes all the traffic flow through my iMac. I wanted a way to analyze the traffic so that I know what connected devices are hogging the bandwidth at a given time and from which websites? I installed wireshark for mac and played around a little but it seems like an overkill when you first look at it. Can someone please help with few instructions to get what I need or any other way other than using wireshark? Thanks Dev.

  Read the article

• L2TP Site to Site VPN issues

  - by Chris Lively

  I have a windows 2008 r2 server that needs to establish a VPN connection to a remote VPN server. We're using the L2TP protocol with a pre-shared key. I initially used the New Demand Dial interface wizard. Then I went into properties on the interface and set the type of VPn to L2TP/IPSec and put the key under the advanced settings. The error I received when attempting to connect is: An error occured during connection of the interface. A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.

  Read the article

• Slow performance with WAMP localhost access from other devices

  - by Adam

  I setup a localhost WAMP server and other device can access my localhost site on my win8 laptop with computer name instead of IP (bc I have use DCIP so that the wireless router can assign me IP otherwise it will not work). However, problem is that the website (WordPress), access speed is extremely slow on other devices other than my localhost computer, usually a 3s task take at least 10 seconds. (i.e. view my localhost site with computer name in a phone within the same wireless network.) Is that normal? What could be the reason causing it? Thank You

  Read the article

• Routing connections to passthrough a local machine

  - by xiamx

  Please tell me if what I'm trying to do is feasible. I have a router named "R" which is connected to WAN. R allows adding rules to the routing table. There are numerous of machines connected to the LAN port of R, they all have ip addresses 192.168.1.* assigned with DHCP on R. Among those machines, there's a machine C with ip address 192.168.1.100. I want all traffic of other machines in the subnet to pass-through machine C where some filtering and logging will be done. Is this possible? Is there a name for what I'm trying to do? (so i can do more googling later)

  Read the article

• Broadcasted networks appear cached with netsh? [on hold]

  - by Joe

  We have a company mandate to hide certain windows functions. I'm working on a company application which will allow my users to configure WiFi networks. The app is scanning broadcasted networks using: "netsh wlan show networks" it will return networks that have been turned off. For example: I will run the command and then unplug my wireless router with the SSID "Netgear". For several minutes after turning off the network, the show networks command will continue to return "Netgear". Does anyone know where this gets cached, how to clear it out, or how to force a fresh scan of "netsh wlan show networks"? Thanks all, J

  Read the article

• How can I connect to some old Sun servers?

  - by hellsgate

  We have some old Sun servers (V125, V210, V240, T2000 amongst others) sitting unused and I've been asked to find out if there is anything useful on them before they get wiped and disposed of. However, I've been unable to connect to any of the servers. I tried connecting the servers to a router using the Net Management, Serial Management and standard Ethernet ports. When doing this, I ran 'nmap -sP' from my Linux desktop before and after connecting a server so I could compare the two outputs and hopefully work out what IP address had been assigned to the server, but it didn't appear to have received one. Unfortunately only one of the servers has a VGA output. I was able to access this machine as we still have the login details stored in KeePass, but I've no idea at the moment on how I should go about connecting to any of the others. Any suggestions?

  Read the article

• iTunes Home Sharing with VPN

  - by Philip Crumpton

  I'm trying to set up a VPN on a Windows machine that contains my iTunes library, then connect my iPhone ot it, wirelessly, using Home Sharing (remotly). I have read that this can easily be set up if the iTunes library is on a Mac (Network Beacon and YazSoft ShareTool are two products I found). I can't find anyone who has had success on a Windows machine, though. In my thinking, there are a few options to getting this done. Find a utility that takes care of this for me (like the Mac-only options listed above) and is compatible with iPhone (Hamachi is NOT compatible with iPhone VPN). Manually configure a VPN to allow Bonjour multicast (I'm not sure what this really is...) Emulate a Mac on my Windows PC. FYI my router is a Linksys WRT54GL running Tomato 1.28 Note question is related to this

  Read the article

• VPN Configuration

  - by Josh

  How can I allow incoming connections on a Windows 7 machine that is connected to VPN? I have some services listening on certain ports that I have forwarded from my router. When the VPN is disconnected, I can connect to these services from my internal network as well as from the Internet without issue. When I connect my VPN however, I am still able to access the ports from my internal network, but not remotely. I think I need a split tunnel setup, and there is an option in the VPN settings to Use Default Gateway on remote network. I want this option enabled so all my traffic is routed through the VPN, but I want incoming connections to be allowed on my internal network IP from the Internet. Is there some hybrid way to set this up with routing?

  Read the article

• Problem with PPTP VPN and internet

  - by Enriquev

  Hello, I have an internet connection the following way : Internet Modem <- FireWall(not a router, a firewall) <- PC Everything is setup so my pc has an external ip address, and my firewall takes care of blocking bad stuff. I connect by VPN to an external network, so I added a new connection using Windows Xp's "New connection wizard" (the vpn client that comes with Windows XP), it's a PPTP connection so I used all default settings. I put the PPTP server's IP, my username and password and I succesfully connected. I was able to have access to the external VPN ressources. The only problem is everytime I connect to this VPN, my computer cannot connect to the web anymore, no msn, no ping, no web. Is there anything special I should be doing?

  Read the article

• VoIP and IPv6 with IPsec

  - by PhilCisco

  Hi, I had some basic questions about VoIP in a IPv6 architecture, right now I'm running VoIP in a v4 architecture, and I was thinking about to change everything to v6. my questions are not that practical but I would like to understand it well. Question 1: if i had internet full v6 or v4 and that I enable IPsec on my v6 router do I still need a VPN through the internet ? because my routers will anyway exchange their pub/priv key or their certificate to ensure the communication. Question 2: If the answer to question 1 is yes then I only have two advantages to put my VoIP architecture to IPv6 the second advantage for me is the NAT which I will not have anymore. I know that right now I should anyway still use things like NAT-PT, Tunnelling and so one but in full v6 are their any other advantages ? Thank you

  Read the article

• How to configure OpenVPN server to use custom default gateway?

  - by Arenim

  I have a vpn server at address 10.1.0.2 and the server have another ip in it's network -- 10.0.0.2 in his subnet (it's a tun2socks router). But default server's gateway is NOT 10.0.0.2 (and it's ok) but another external IP. I want all the client's traffic to be forwarded through this ip address -- 10.0.0.2. Here is part of my server's config: dev tap0 server-bridge 10.1.0.1 255.255.255.0 10.1.0.50 10.1.0.100 push "route 10.0.0.0 255.255.255.0" ; now client can ping 10.0.0.2 push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 10.1.0.1" push "dhcp-option WINS 10.1.0.1" in fact i want some like push "redirect-gateway 10.0.0.2" How can I achieve this?

  Read the article

• WAN and LAN setup for IPv6

  - by neu242

  We just got a IPv6 /48 range (a gateway and an IP address) for our company, but I'm unsure about how to set it up. We use FreeBSD 8.4 (pfSense 2.1) as a router/firewall. Currently we have IPv4 setup with a WAN towards the internet, and a NAT-ed LAN behind it for office PCs. We want to keep the LAN network for security, and we want IPv6 addresses from the /48 for all office PCs (without NAT). The WAN is configured with the IPv6 gateway 1111:2222:3333::1/48 and interface address 1111:2222:3333::2/48. But when it's configured this way, I guess it's impossible to fit the LAN on a /64 within the /48? I believe I should configure the WAN subnet on 1111:2222:3333:1::/64 and the LAN on a subnet like 1111:2222:3333:2::/64. Is this something I can configure myself, or do I have to ask the ISP to configure that routing for me?

  Read the article

• Setting up virtual network in VMware workstation

  - by Saif Bechan

  I am playing around with VMware workstation and am trying to set up a small virtual network. I am having a little trouble with this I hope somebody can help me out. I want to have all the different virtual machines to have different internal IP adresses so I can ping them SSH etc, from within my windows machine. I am directly connected to the internet without a router, so using a bridged connection does not seem to work. The other options NAT and host-only do not seem to work also. I think i need to create a new adapter. I am testing this out with a virtual image of linux debain 5.0 lenny. I have WMware Workstation 7 with virtual network editor. Can anyone guide me in the right direction.

  Read the article

• Can't get port forwarding to work on Ubuntu

  - by Znarkus

  I'm using my home server as NAT/router, which works well. But now I'm trying to forward port 3478, which I can't get to work. eth0 = public interface eth1 = private network $ cat /proc/sys/net/ipv4/conf/eth0/forwarding 1 $ cat /proc/sys/net/ipv4/conf/eth1/forwarding 1 Then to forward port 3478 to 10.0.0.7, I read somewhere that I should run iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 3478 -j DNAT --to-destination 10.0.0.7:3478 iptables -A FORWARD -p tcp -d 10.0.0.7 --dport 3478 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I also ran ufw allow 3478 But testing port 3478 with http://www.canyouseeme.org/ doesn't work. Any idea what I have done wrong?

  Read the article

• When should .local be used?

  - by hydroparadise

  So, I've set up a few Win Servs in my time and always did the .local thing when there was a router that sepearated my internal from external networks. Now that I'm setting up an *nix box for the first time, does this concept still apply? Do I still want my FQDNs (/etc/hostname) to show .local or .com for all my machines (mixed: linux servers, win workstations) inside of my network. This question comes in context of always having Active Directory hold my hand every step of the way, where now I'm setting up an DNS machine manually.

  Read the article

• Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

  - by thecraic

  I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

  Read the article

• Access to a network server without port forwarding

  - by SdevDavid

  I have a network with the following structure. The server in PC2 is simple socket server TCP in 8080 port. I need to access to PC2 from other external network by socket client. This socket client knows the public IP (85.xxx.xxx.x), the private IP (192.168.0.21) and the port. How I can access PC2 without port forwarding on the router? If possible, I would like to have a reference in any programming language of this case.

  Read the article

• How can I disable internet for a specific interface in Windows 7?

  - by MGSoto

  I have two NICs on my machine, one which connects to my network and has my internet connection. The other connects to a buddy next doors network with his internet connection. I don't want Windows magically deciding which internet connection to use, I want it to use mine. I've had some success by blanking out DNS servers for his connection, but then I also lose hostname resolution on his network and I realize this doesn't solve everything 100%. How can I force Windows to use only my connection while avoiding the use of a router?

  Read the article

• Set Up Remote Desktop at Home

  - by Rev

  I'm sure this has been asked before, but I'm unable to find a clear set of instructions. I'm currently using LogMeIn Hamachi to enable Windows 8's Remote Desktop feature on my home computer (running Win8 Pro x64). Unfortunatley, I can't use this method to access my home computer from my Surface Tablet, as I can't install in the Hamachi client. So how can I set up Remote Desktop without using LogMeIn Hamachi? A link to a noob-friendly tutorial would be greatly appreciated. I haven't been able to find anything that I understand (and I am pretty technical, router stuff just stumps me for some reason). EDIT: And I don't want to use a third party service like TeamViewer, in my experience those tools are laggy and quite horrible. The Remote Desktop feature has been excellent.

  Read the article

• Sharing VPN access between two computers on the LAN

  - by Axelle Ziegler

  I have VPN access to several machines in my office from my home machine. I'd like to be able to access those machines from another computer on my LAN, without setuping a second VPN access. Both computers are Windows 7 machines. Is there a way for my "main" computer to share its VPN access to another machine on the LAN? How would one setup this share? I don't think "simple" Internet connection sharing fits my needs because: My LAN already has its own DHCP/Router to access the Internet, and I'd like to keep it this way I can't access the Internet through my VPN connection

  Read the article

• RV042 - how to broadcast UDP through VPN

  - by user47221

  I setup a gateway to gateway vpn connection with linksys RV042 router. i was able to ping each other, access file sharing ( with netbios enabled ). They are having same subnet mask 255.255.255.0, 192.168.1.0 <--- 192.168.2.0 Firewall disabled. But when i created/host LAN games (eg. warcraft3), it cannot be detect by clients at another site/LAN. As i know warcraft3 is using UDP broadcast to tell the client the game is creaetd. 1. How to broadcast UDP to another LAN ? any things to do with multicast ?

  Read the article

• Mac OSX DHCP Stopped Working [on hold]

  - by Jesse James Richard

  Tethering a Raspberry PI to a MacBook (Mavericks) via ethernet is proving to be a real pain. This worked for about a day. My MacBook required a rare reboot and once it came back up the Pi won't get an address. I've confirmed it's not a problem with the Pi. It's a problem with the MacBook for sure. It's basically just stopped giving out IPs. I've read as much as I've found about how to fix this friggin' problem, but I've thus far come up blank. Internet sharing Wi-fi Ethernet enabled, and/or Edited /etc/bootpd.plist as described here (http://www.jacquesf.com/2011/04/mac-os-x-dhcp-server/ - this worked initially and now no longer does) Pi connected directly to the router has no problems. My MacBook DHCP server will no longer give out addresses. Any help would be much appreciated.

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >