Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 132/176 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• Straight-forward to Virtualise with XEN or KVM on IBM Server System x3650 M4 791562G?

  - by ChrisZZ

  I want to built a virtualised Server Environment using XEN or KVM. The virtual machines should be purely debian systems - so XEN or KVM should be a sane choice. Now while buying servers, I am confronted with the fact, that the vendors obviously only support commercial solution. I think, on a good server, one should be able to install uncommercial software as well - but of course sometimes systems have hardware, that requires drivers, that are not found in the OS Community. So I am asked the question: Is it straight-forward to use Debian with IBM Server System x3650 M4 791562G with Debian - or even virtualising the IBM Server System x3650 M4 791562G using XEN or KVM. I am sure there will always be a way to achieve this goal - but this way might have a high milage - so I am not asking, whether this is theoretical possible, but whether this should be straight-forward and practically easy to do, no major headaches to be expected.

  Read the article

• Hibernate doesn't work in Windows 7 64bit

  - by hey

  Hibernate doesn't work in Windows 7 64bit. When I try to hibernate, it just turns off computer and when I turn on it, it doesn't resume and it just starts as 'fresh' again. I updated my drivers. What is the problem? Can you give me a hand? Thank you. Come on, please help me, I really need hibernate working, 100 of my reputation will go to you. Thanks. Edit, by the way, my model is: Inspiron N5010. After I hibernate and turn on my computer, it just show Shut down didn't shut down correctly.

  Read the article

• RocketRaid gives me studdering computer

  - by Dan

  I have a RocketRaid SanDigital 8U TowerRaid with 8x5900 RPM 2 TB harddrives in a raid 5. When I'm writing data to the drives my computer studders (meaning freezes for a 1/2 second every 2 seconds or so). My screen freezes, my music goes into a loop, its really annoying. I get the same thing in windows 7 as I do in linux. The only difference is it seems to happen less in linux, but occassionally linux will crash (I've never had linux crash for any other reason, so I'm assuming they have poor linux drivers and kernal mod). Any tips for how to deal with this? Thanks

  Read the article

• Windows XP crashes by GT610 driver (nv4_disp)

  - by undone

  I have a PC which was working fine but one day screen went dark and nothing was shown. I thought the problem is graphic card, so I replaced it with new one. I bought a new graphic card (GeForce 610) and installed it on my system. I formatted my hard-drive and installed a fresh Windows XpSp3 and its drivers. Everything was fine but after installing graphic card's driver, I got an error saying windows got stuck in an infinite loop and it couldn't get out (in nv4_disp). I uninstalled it and downloaded its last version and installed it. Unfortunately, I got the same error and windows restated! Here's my system: Pascal Motherboard PT880PRO Intel CPU Windows XPSp3 I searched this issue on the internet and I found bunch of suggestions (from cleaning hardware to installing latest version of its driver) but nothing help! Any help would be appreciated! Thanks.

  Read the article

• Nvidia driver on Windows 7 causing black screen

  - by inKit

  I have just installed Windows 7 on a desktop machine and for the first time ever have had a really tough time doing so, its normally a nice smooth install. This time I found that the monitor would simply go black after completing the installation. I tried reinstalling about 3 times and this did not help. After much searching I discovered that it was the nvidia drivers that were playing up with win 7, so i booted into safe mode, disabled the device, then rebooted to complete the installation. Windows 7 now works fine as long as the nvidia 9600 gt video card is disabled. The moment I enable it, the system requires a reboot and the screen will go black before even getting to the log in screen. I have tried downloading the latest driver and installing it manually, I have also tried uninstalling the device and allowing windows 7 to install it itself. Nothing seems to work. any clues?

  Read the article

• an issue with VMWare Workstation 10 and three monitors

  - by whtvr

  I'm having a bit of a problem with using three monitors with VMWare Workstation 10. When only two monitors are enabled in the system I have an option to "Cycle Multiple Monitors", available from the View menu (in full screen). When I enable the third monitor that option is no longer in the menu and I can only use one monitor at a time. I've found this article and a "Choose a Monitor Layout" button is mentioned there but I'm unable to see it anywhere. I'm using Windows 8.1 as the host and Ubuntu 14.04 as the guest. The graphics card is AMD Radeon R9 290x with latest beta drivers

  Read the article

• Can't set up printer

  - by Jason Swett

  I'm trying to set up an HP OFficejet Pro 8500 A909a on my Windows XP machine over the network. I know the IP address of the printer but it's unclear to me how to set it up based on that. I have no idea how to troubleshoot this problem. I've tried installing the drivers but when I do that it tells me the printer is on a different gateway from my workstation, which is not true. Also, other people in the office are able to connect to this printer just fine, although the driver apparently didn't work for them, either.

  Read the article

• Windows 7 Hibernate Problem

  - by goygoycu

  I cannot hibernate windows. When I click "hibernate", my laptop(windows) just locks and the screen goes black. I can unlock without any problem. I do not have any problem with other options such as "sleep" or "shut down". I updated the chipset drivers but it did not help. There is not any option in BIOS about the sleep modes. "Hibernate" is "on" on Windows. Any advice? My Laptop specifications: MSI A5000 3gb system memory, Windows 7 Home Premium 32bit installed, Gentoo linux installed, Grub bootloader(MBR). Hard drive: Around 4gb of free space in windows partition.

  Read the article

• Windows 7 Laptop, cursor jumping after typing the letters "y" or "t" [closed]

  - by Dave K

  My wife has an HP laptop running windows 7. She has a very frustrating problem when typing: in some, but not all cases, typing the letter's "y" or "t" will cause the cursor to jump back a few lines or some number of words. The result is that she ends up typing over whatever it was that she was working on. (as a matter of fact, I just experienced this while typing this question on her computer with the phrase: "typing the letter..." above.) I've installed the latest drivers for her touchpad from Synaptic and disabled tap touching and gesture features to rule out simple unintended mouse clicks. Still the "y" and "t" keys continue to cause problems.

  Read the article

• Why do I have inconsistent network issues with my laptop's wireless?

  - by Jason

  I'm having trouble with my laptop Internet connection. It's patchy at best and resets or freezes a lot. The signal strength is also random. I thought it might be a driver issue but now I don't know. Three other computers using the same wireless network run well. I've switched out wireless routers so I don't think it's the router. I thought it might be the laptop's internal wireless card but I just bought an external USB network card and I'm still having problems. Specs Lenovo T-60p Windows 7 Ultimate Edition Patches/drivers are up to date I only use one of the below at a time, disabling the other: Intel PRO/Wireless 3945ABG v. 13.3.0.137 (Internal wireless) Medialink Wireless-N USB 2.0 Adapter (USB wireless) Any ideas on what might be the problem?

  Read the article

• When to run SYSPREP

  - by haxel

  I am attempting to set up a computer using an answer file created by the WAIK and resetting the settings with SYSPREP and had a quick question. We are wanting to use Norton GHOST for our deployments. When do I run the sysprep? I figure it is after I get the computer all set up with the proper updates/software/drivers but I have not been able to find a direct answer to this online. Do i run it after everything is set up and the system is ready to be captured?

  Read the article

• How to "get" a reliable parallel port on a laptop without a PCMCIA slot?

  - by ldigas

  Usb-Parallel port (for an old, but reliable matrix printer that has its special use) connections (cables) are unreliable. They sometimes work, sometimes don't - and since I installed Windows 7 I can't get neither of my old ones to work properly. PCMCIA is usually considered (and it is) a much more reliable solution, but unfortunatelly, none of my new laptops has a PCMCIA slot. So, all ideas are welcomed. What should I do? I'm open to all suggestions as long as you have some experience that they work more reliably than USB-Parallel cables and their wicked drivers.

  Read the article

• Freeze during Battlefield 3 - Probable Hardware issue?

  - by HendsteR

  my friend's notebook frequently freezes during BF3 sessions since ~1 1/2 months. It runs Win764Bit and he already reinstalled windows during the process, it didn't help. So we guess it might probably be a hardware issue. Now the question - which part of the hardware could effect a total freeze of the system WITHOUT getting a bluescreen? Or are there any known software issues he could also try? The hardware specs are: Acer 7745G Intel i7 720QM AMD Mobility 5850HD - Running Catalyst 11.6 now btw. (all drivers tested from 11.2 to 12.6 though) 4GB Ram 1.333MHz Oh and yeah, he just added that it crashes playing Diablo3 from time to time, too. Please help :)

  Read the article

• Extract X11 configuration information from running instance.

  - by kasterma

  Since I had a hard disk die on me, I figured I could easily try some other OS (I usually run Ubuntu). Turns out that Ubuntu flawlessly recognizes my video card and monitor (X11 works right out of the box), and none of the other systems I tried gets anything working (I tried CentOS and FreeBSD). In my now working version of Ubuntu I cannot find a configuration file with information I could try to use with one of the other versions, which makes me guess that it just detects the hardware every time. Can I extract its choice for drivers and configuration options somehow (so I can try these same options in the other systems)?

  Read the article

• Nvidia driver on Windows 7 causing black screen

  - by inKit

  I have just installed Windows 7 on a desktop machine and for the first time ever have had a really tough time doing so, its normally a nice smooth install. This time I found that the monitor would simply go black after completing the installation. I tried reinstalling about 3 times and this did not help. After much searching I discovered that it was the nvidia drivers that were playing up with win 7, so i booted into safe mode, disabled the device, then rebooted to complete the installation. Windows 7 now works fine as long as the nvidia 9600 gt video card is disabled. The moment I enable it, the system requires a reboot and the screen will go black before even getting to the log in screen. I have tried downloading the latest driver and installing it manually, I have also tried uninstalling the device and allowing windows 7 to install it itself. Nothing seems to work. any clues?

  Read the article

• IntelliPoint & Intellitype upgrade to Mouse and Keyboard Center causing system freeze?

  - by Kent England

  I allowed Microsoft to upgrade my wireless keyboard 6000 v3.0 and mouse 6000 v2.0 from Intelliyada v 8.20.468 to what appears to be v9.1.486. This was some time ago, so I can't be certain but this upgrade might be causing my system to freeze on the logon screen (user selection) in Windows 7 Home Premium 32-bit. Mouse and keyboard don't work, but system seems to be running underneath. No indication in Event Viewer about keyboard/mouse driver issues. Might be problem with transceiver hardware. I now have the "Microsoft Mouse and Keyboard Center" UI which isn't very helpful (seems to be very metro) in debugging these drivers. I'm just looking to see if anyone else had problems upgrading to this new Intelliyada software for their MS keyboard and rodent.

  Read the article

• Third monitor randomly defaults to 640 x 480 on startup

  - by ajbdev

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

• I want to "image" 40+ laptops quickly...i welcome suggestions on reliable software

  - by Joldfield101

  I often have batches of laptops/PC's to re-image and have tried various methods, but each of them has been problematic and often take more time to troubleshoot than it would have been to image them individually! For example, i have tried to use ghost - i installed ghostcast server on my laptop but the clients never seem to boot to LAN successfully, or it takes an hour to get everything sorted (drivers, LAN, DHCP etc etc). I want a reliable tool that makes imaging quick and easy - and i don't mind paying for it if it's going to work (but obviously free = always good!)

  Read the article

• Windows 7 64 bit will hesitate and the screen will go black

  - by jondrnek

  I am running windows 7 64 bit with 2 monitors. Several time a day the system will freeze up for about 5 seconds and the screens will go black. After the 5 seconds are up, the system continues to function properly. I get no error messages that pop up and all the applications I am running handle it fine. All the devices appear fine, my drivers are up to date and nothing is jumping out at me in event viewer. What are the next troubleshooting steps I can take?

  Read the article

• What Filesystem should be used for a 4TB drive for both Windows and OSX compatibility? [closed]

  - by Nicholas Yost

  Note: I am aware of similar questions. The one's I seen here are for Windows, OSX, and Linux (which I do not need). I also can use Mountain Lion, which the other questions did not mention. I was going to use NTFS, but OSX Mountain Lion can only read that filesystem and not write to it for some reason. I want to use something native between OSX and Windows, as I don't want to risk losing the data over filesystem incompatibilities. I have USB 3.0 and want something that will allow files greater than 4GB. I do not mind installing a small set of drivers on the Windows machine(s), but I would strongly prefer to leave the Mac machine untouched. Thanks!

  Read the article

• Keyboard no longer works when entering BIOS

  - by Tommy

  I am trying to boot from USB so I can install a couple different Linux distros. I can enter the BIOS, but as soon as I enter the BIOS the keyboard lights switch off (Num Lock and Caps Lock) and I cannot use the keyboard to do anything in the BIOS or even exit or restart the PC using Ctrl+Alt+Del or do anything at all with the keyboard. But as soon as I boot back into Windows, everything is fine... I've never had this problem before and some Googling hasn't helped. I've tried using a few other keyboards and simply unplugging/replugging the keyboards, but it didn't work. Is there anything I can do in Windows to maybe find out why the keyboard isn't working in the BIOS screen? In the Device Manager, all the drivers are up to date and there are no conflicts.

  Read the article

• USB 3.0 Device not detected in Windows 8

  - by Tek

  About my setup: Windows 8 64-bit. X79-UD3 Motherboard. Latest Windows 8 USB 3.0 Drivers from motherboard manufacturer website. All right so device manager detects my USB 3.0 ports, so all is well there. However when I plug in my external USB 3.0 hard drive, windows doesn't even make a beep; the hard drive is not picked up by device manager at all. The SAME thing happens with Ubuntu 12.10 BUT adding PCI=nomsi (as a workaround) to the Grub command line of the Ubuntu boot option makes Ubuntu 12.10 detect my external hard drive. I also have a few other doubts, if you guys would be kind enough to answer them that include: Should XHCI hand-off in the UEFI bios be enabled or disabled for Windows 8? The difference between XHCI hand-off and EHCI hand-off and what are it's effects on USB 3.0 functionality? And last but not least how can I get Windows 8 to recognize my external hard drive when Ubuntu 12.10 (after the Grub workaround) works fine?

  Read the article

• RAID 1 in ubuntu 12.04

  - by Bavly Hanna

  Right now I have a small file server to which I have loaded ubuntu 12.04 desktop on a small 160gb harddrive. This harddrive is the primary drive from which the OS boots. I want to move all my data to my file server so it can be shared on the network (contain in 2x2TB harddrives in my desktop. The 2TB drivers are in raid 1 (hardware). I simply want to move them to the file server and set it up so that they are in software raid 1. If at all possible I'd like to be able to do this without losing any info on the drives. I've searched around and the guides i find describe raiding drives for boot driver, but these wouldn't be boot drives just regular storage drives. If someone could tell me how to perform this or point me in the right direction it would be much appreciated.

  Read the article

• Left click and enter not working

  - by user1981338

  Sometimes when I turn on my homemade desktop computer (running 64-bit Windows 7), the left mouse click and enter key doesn't work. They work well in BIOS, as well as on the Windows 7 BCD and login screen. Usually, restarting the computer solves the problem. Why does this keep happening? I've tried: Using other USB ports Refreshing, repairing and reinstalling drivers Changing mouse settings Refreshing mouse profiles My keyboard is a Logitech G510, and my mouse is a Razer Lanchesis 5600. Both work without problems in Ubuntu 12.04 and Windows 8.1 Preview, and I've been using both on my 64-bit Windows 7 homemade desktop without problems for about a year and a half. I encountered the problems yesterday.

  Read the article

• Pressing zero key brings up lock/switch user screen in W7

  - by qinghua

  This issue started after my cat walked all over the keyboard... Whenever I press the "zero" key, the screen goes black and I'm taken to the lock/switch user screen. The other functions of the key work fine - it can produce ) and / like usual. Numlock is off, and as far as I know, my computer doesn't have Function Lock. If I log out of my user account and sign in as a guest, the "zero" works again, but if I create a new user profile, it doesn't work. I get the same issue when I hit "zero" using the on-screen keyboard. My keyboard layout is set to US English. I've uninstalled and reinstalled the ATK package, and updated my keyboard drivers. I have an ASUS U43JC-X1 laptop running Windows 7, and I haven't installed any new programs lately.

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >