Search Results

Search found 37200 results on 1488 pages for 'select option'.

Page 132/1488 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

  • Question about DBD::CSB Statement-Functions

    - by sid_com
    From the SQL::Statement::Functions documentation: Function syntax When using SQL::Statement/SQL::Parser directly to parse SQL, functions (either built-in or user-defined) may occur anywhere in a SQL statement that values, column names, table names, or predicates may occur. When using the modules through a DBD or in any other context in which the SQL is both parsed and executed, functions can occur in the same places except that they can not occur in the column selection clause of a SELECT statement that contains a FROM clause. # valid for both parsing and executing SELECT MyFunc(args); SELECT * FROM MyFunc(args); SELECT * FROM x WHERE MyFuncs(args); SELECT * FROM x WHERE y < MyFuncs(args); # valid only for parsing (won't work from a DBD) SELECT MyFunc(args) FROM x WHERE y; Reading this I would expect that the first SELECT-statement of my example shouldn't work and the second should but it is quite the contrary. #!/usr/bin/env perl use warnings; use strict; use 5.010; use DBI; open my $fh, '>', 'test.csv' or die $!; say $fh "id,name"; say $fh "1,Brown"; say $fh "2,Smith"; say $fh "7,Smith"; say $fh "8,Green"; close $fh; my $dbh = DBI->connect ( 'dbi:CSV:', undef, undef, { RaiseError => 1, f_ext => '.csv', }); my $table = 'test'; say "\nSELECT 1"; my $sth = $dbh->prepare ( "SELECT MAX( id ) FROM $table WHERE name LIKE 'Smith'" ); $sth->execute (); $sth->dump_results(); say "\nSELECT 2"; $sth = $dbh->prepare ( "SELECT * FROM $table WHERE id = MAX( id )" ); $sth->execute (); $sth->dump_results(); outputs: SELECT 1 '7' 1 rows SELECT 2 Unknown function 'MAX' at /usr/lib/perl5/site_perl/5.10.0/SQL/Parser.pm line 2893. DBD::CSV::db prepare failed: Unknown function 'MAX' at /usr/lib/perl5/site_perl/5.10.0/SQL/Parser.pm line 2894. [for Statement "SELECT * FROM test WHERE id = MAX( id )"] at ./so_3.pl line 30. DBD::CSV::db prepare failed: Unknown function 'MAX' at /usr/lib/perl5/site_perl/5.10.0/SQL/Parser.pm line 2894. [for Statement "SELECT * FROM test WHERE id = MAX( id )"] at ./so_3.pl line 30. Could someone explaine me this behavior?

    Read the article

  • xsl:variable contains nodeset. How to output nth node of variable?

    - by dnagirl
    I am transforming an XML document. There is an attribute @prettydate that is a string similar to "Friday, May 7, 2010". I want to split that string and add links to the month and the year. I am using the exslt:strings module and I can add any other necessary EXSLT module. This is my code so far: <xsl:template match="//calendar"> <xsl:variable name="prettyparts"> <xsl:value-of select="str:split(@prettydate,', ')"/> </xsl:variable> <table class='day'> <thead> <caption><xsl:value-of select="$prettyparts[1]"/>, <a> <xsl:attribute name='href'><xsl:value-of select="$baseref"/>?date=<xsl:value-of select="@highlight"/>&amp;per=m</xsl:attribute> <xsl:value-of select='$prettyparts[2]'/> </a> <xsl:value-of select='$prettyparts[3]'/>, <a> <xsl:attribute name='href'><xsl:value-of select="$baseref"/>?date=<xsl:value-of select="@highlight"/>&amp;per=y</xsl:attribute> <xsl:value-of select='$prettyparts[4]'/> </a> </caption> <!--etcetera--> I have verified, by running $prettyparts through a <xml:for-each/> that I am getting the expected nodeset: <token>Friday</token> <token>May</token> <token>7</token> <token>2010</token> But no matter which way I attempt to refer to a particular <token> directly (not in a foreach) I get nothing or various errors to do with invalid types. Here's some of the syntax I've tried: <xsl:value-of select="$prettyparts[2]"/> <xsl:value-of select="$prettyparts/token[2]"/> <xsl:value-of select="exsl:node-set($prettyparts/token[2])"/> <xsl:value-of select="exsl:node-set($prettyparts/token)[2]"/> Any idea what the expression ought to be?

    Read the article

  • How to Create Auto Playlists in Windows Media Player 12

    - by DigitalGeekery
    Are you getting tired of the same old playlists in Windows Media Player? Today we’ll show you how to create dynamic auto playlists based on criteria you choose in WMP 12 in Windows 7. Auto Playlists In Library view, click on Create playlist dropdown arrow and select Create auto playlist. On the New Auto Playlist window type in a name for the playlist in the text box. Now we need to choose our criteria by which to filter your playlist. Select Click here to add criteria. For our example, we will create a playlist of songs that were added to the library in the last week from the Alternative genre. So, we will first select Date Added from the dropdown list. Many criteria will have addition options to configure. In the example below you will see that we have a few options to fine tune.   We will filter all the songs added to the library in the last 7 days. We will select Is After from the first dropdown list. Then select Last 7 Days from the second dropdown list. You can add multiple criteria to further filter your playlist. If you can’t find the criteria you are looking for, select “More” at the bottom of the dropdown list.   This will pull up a filter window with all the criteria. Select a filter and then click OK when finished.   From the Genre dropdown, we will select Alternative. If you’d like to add Pictures, Videos, or TV Shows to your auto playlists you can do so by selecting them from the dropdown list under And also include. You will then be able to select criteria for your pictures, videos, or TV shows from the dropdown list.   Finally, you can also add restrictions to your music such as the number of items, duration, or total size. We will limit the duration of our playlist to one hour by selecting Limit Total Duration To… Then type in 1 hour…Click OK.   Our library is automatically filtered and a playlist is created based on the criteria we selected. When additional songs are added to the Windows Media Player library, any of new songs that fit the criteria will automatically be added to the New Songs playlist. You can also save a copy of an auto playlist as a regular playlist. Switch to Playlists view by clicking Playlists from either the top menu or the navigation bar. Select the Play tab and then click Clear list to remove any tracks from the list pane.   Right-click on the playlist you want to save, select Add to, and then Play list. The songs from your auto playlist will appear as an Unsaved list on the list pane. Click Save list. Type in a name for your playlist. Your auto playlist will continue to change as you add or remove items from your Media Player library that meet the criteria you established. The new saved playlist we just created will stay as it is currently. Editing a Auto playlist is easy. Right-click on the playlist and select Edit. Now you are ready to enjoy your playlist. Conclusion Auto playlists are great way to keep your playlists fresh in Windows Media Player 12. Users can get creative and experiment with the wide variety of criteria to customize their listening experience. If you are new to playlists in Windows Media Player, you may want to check our our previous post on how to create custom playlists in Windows Media Player 12. Are you looking to get better sound from WMP 12? Take a look at how to improve playback using enhancements in Windows Media Player 12. Similar Articles Productive Geek Tips Create Custom Playlists in Windows Media Player 12Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxMake Windows Media Player Automatically Open in Mini Player ModeMake VLC Player Look like Windows Media Player 10 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid

    Read the article

  • SQL SERVER – Enumerations in Relational Database – Best Practice

    - by pinaldave
    Marko Parkkola This article has been submitted by Marko Parkkola, Data systems designer at Saarionen Oy, Finland. Marko is excellent developer and always thinking at next level. You can read his earlier comment which created very interesting discussion here: SQL SERVER- IF EXISTS(Select null from table) vs IF EXISTS(Select 1 from table). I must express my special thanks to Marko for sending this best practice for Enumerations in Relational Database. He has really wrote excellent piece here and welcome comments here. Enumerations in Relational Database This is a subject which is very basic thing in relational databases but often not very well understood and sometimes badly implemented. There are of course many ways to do this but I concentrate only two cases, one which is “the right way” and one which is definitely wrong way. The concept Let’s say we have table Person in our database. Person has properties/fields like Firstname, Lastname, Birthday and so on. Then there’s a field that tells person’s marital status and let’s name it the same way; MaritalStatus. Now MaritalStatus is an enumeration. In C# I would definitely make it an enumeration with values likes Single, InRelationship, Married, Divorced. Now here comes the problem, SQL doesn’t have enumerations. The wrong way This is, in my opinion, absolutely the wrong way to do this. It has one upside though; you’ll see the enumeration’s description instantly when you do simple SELECT query and you don’t have to deal with mysterious values. There’s plenty of downsides too and one would be database fragmentation. Consider this (I’ve left all indexes and constraints out of the query on purpose). CREATE TABLE [dbo].[Person] ( [Firstname] NVARCHAR(100), [Lastname] NVARCHAR(100), [Birthday] datetime, [MaritalStatus] NVARCHAR(10) ) You have nvarchar(20) field in the table that tells the marital status. Obvious problem with this is that what if you create a new value which doesn’t fit into 20 characters? You’ll have to come and alter the table. There are other problems also but I’ll leave those for the reader to think about. The correct way Here’s how I’ve done this in many projects. This model still has one problem but it can be alleviated in the application layer or with CHECK constraints if you like. First I will create a namespace table which tells the name of the enumeration. I will add one row to it too. I’ll write all the indexes and constraints here too. CREATE TABLE [CodeNamespace] ( [Id] INT IDENTITY(1, 1), [Name] NVARCHAR(100) NOT NULL, CONSTRAINT [PK_CodeNamespace] PRIMARY KEY ([Id]), CONSTRAINT [IXQ_CodeNamespace_Name] UNIQUE NONCLUSTERED ([Name]) ) GO INSERT INTO [CodeNamespace] SELECT 'MaritalStatus' GO Then I create a table that holds the actual values and which reference to namespace table in order to group the values under different namespaces. I’ll add couple of rows here too. CREATE TABLE [CodeValue] ( [CodeNamespaceId] INT NOT NULL, [Value] INT NOT NULL, [Description] NVARCHAR(100) NOT NULL, [OrderBy] INT, CONSTRAINT [PK_CodeValue] PRIMARY KEY CLUSTERED ([CodeNamespaceId], [Value]), CONSTRAINT [FK_CodeValue_CodeNamespace] FOREIGN KEY ([CodeNamespaceId]) REFERENCES [CodeNamespace] ([Id]) ) GO -- 1 is the 'MaritalStatus' namespace INSERT INTO [CodeValue] SELECT 1, 1, 'Single', 1 INSERT INTO [CodeValue] SELECT 1, 2, 'In relationship', 2 INSERT INTO [CodeValue] SELECT 1, 3, 'Married', 3 INSERT INTO [CodeValue] SELECT 1, 4, 'Divorced', 4 GO Now there’s four columns in CodeValue table. CodeNamespaceId tells under which namespace values belongs to. Value tells the enumeration value which is used in Person table (I’ll show how this is done below). Description tells what the value means. You can use this, for example, column in UI’s combo box. OrderBy tells if the values needs to be ordered in some way when displayed in the UI. And here’s the Person table again now with correct columns. I’ll add one row here to show how enumerations are to be used. CREATE TABLE [dbo].[Person] ( [Firstname] NVARCHAR(100), [Lastname] NVARCHAR(100), [Birthday] datetime, [MaritalStatus] INT ) GO INSERT INTO [Person] SELECT 'Marko', 'Parkkola', '1977-03-04', 3 GO Now I said earlier that there is one problem with this. MaritalStatus column doesn’t have any database enforced relationship to the CodeValue table so you can enter any value you like into this field. I’ve solved this problem in the application layer by selecting all the values from the CodeValue table and put them into a combobox / dropdownlist (with Value field as value and Description as text) so the end user can’t enter any illegal values; and of course I’ll check the entered value in data access layer also. I said in the “The wrong way” section that there is one benefit to it. In fact, you can have the same benefit here by using a simple view, which I schema bound so you can even index it if you like. CREATE VIEW [dbo].[Person_v] WITH SCHEMABINDING AS SELECT p.[Firstname], p.[Lastname], p.[BirthDay], c.[Description] MaritalStatus FROM [dbo].[Person] p JOIN [dbo].[CodeValue] c ON p.[MaritalStatus] = c.[Value] JOIN [dbo].[CodeNamespace] n ON n.[Id] = c.[CodeNamespaceId] AND n.[Name] = 'MaritalStatus' GO -- Select from View SELECT * FROM [dbo].[Person_v] GO This is excellent write up byMarko Parkkola. Do you have this kind of design setup at your organization? Let us know your opinion. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Best Practices, Database, DBA, Readers Contribution, Software Development, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Secondary DHCP server won't start on Centos 6.2

    - by Slowjoe
    I'm trying to create a backup DHCP server. Server times are in sync. Primary server starts fine. Secondary server won't start. Error from /var/log/messages is: Sep 15 14:47:45 stream dhcpd: Copyright 2004-2010 Internet Systems Consortium. Sep 15 14:47:45 stream dhcpd: All rights reserved. Sep 15 14:47:45 stream dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 25: invalid statement in peer declaration Sep 15 14:47:45 stream dhcpd: #011max-response-default Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 41: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 49: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in. Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 70: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 78: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: Configuration file errors encountered -- exiting Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: This version of ISC DHCP is based on the release available Sep 15 14:47:45 stream dhcpd: on ftp.isc.org. Features have been added and other changes Sep 15 14:47:45 stream dhcpd: have been made to the base software release in order to make Sep 15 14:47:45 stream dhcpd: it work better with this distribution. Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: Please report for this software via the CentOS Bugs Database: Sep 15 14:47:45 stream dhcpd: http://bugs.centos.org/ Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: exiting. Config file contents: # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "eng.foo.com"; option domain-name-servers ns0.eng.foo.com, ns1.eng.foo.com; option ntp-servers ntp.eng.foo.com; #option time-servers ntp.eng.foo.com; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; failover peer "dhcp-failover" { secondary; address 10.0.1.70; port 647; peer address 10.0.1.11; peer port 647; max-response-default 30; max-unacked-updates 10; load balance max seconds 3; } # # Management subnet # subnet 10.0.0.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; option routers 10.0.0.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.0.240 10.0.0.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.0.150 10.0.0.199; deny unknown-clients; } include "/etc/dhcp/dhcpd.conf-engmgmt"; } # # Data subnet # subnet 10.0.1.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.1.255; option routers 10.0.1.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.1.240 10.0.1.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.1.150 10.0.1.199; deny unknown-clients; } # For centos network installs if substring (option vendor-class-identifier, 0, 8) = "anaconda" { filename "/autohome/distro/ks/"; next-server eng-data.eng.foo.com; } # For PXE network installs if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } # For KVM PXE network installs if substring (option vendor-class-identifier, 0, 9) = "Etherboot" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } include "/etc/dhcp/dhcpd.conf-engdata"; }

    Read the article

  • How to change metamode in xorg.conf so that my game in FHD will be displayed only in the external monitor?

    - by Patryk
    I would like to launch my game only in the external monitor which I have attached to my laptop with hdmi cable. This is my current xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 319.60 (buildmeister@swio-display-x64-rhel04-15) Wed Sep 25 15:17:31 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "metamodes" "1024x786,NULL;1280x720,NULL;NULL,1680x1050;NULL,1920x1080" SubSection "Display" Depth 24 EndSubSection EndSection Although with this config nothing changes (I have my game displayed in the laptop screen and exceeding a little bit onto the external monitor since I set it to be in 1920x1080) I have read this https://help.ubuntu.com/community/XineramaHowTo but with no luck of solving this issue. The only temporary solution for this problem now is to manually switch of the laptop display and then launch the game.

    Read the article

  • SQL SERVER – Simple Explanation and Puzzle with SOUNDEX Function and DIFFERENCE Function

    - by pinaldave
    Earlier this week I asked a question where I asked how to Swap Values of the column without using CASE Statement. Read here: A Puzzle – Swap Value of Column Without Case Statement,there were more than 50 solutions proposed in the comment. There were many creative solutions. I have mentioned my personal favorite (different ones) here: Solution of Puzzle – Swap Value of Column Without Case Statement. However, I received lots of questions regarding one of the Solution by SIJIN KUMAR V P. He has used the function SOUNDEX in his solution. The request was to explain how SOUNDEX and DIFFERENCE works. Well, there are pretty decent documentations provided over here SOUNDEX function and DIFFERENCE over on MSDN and if I attempt to explain this function I will end up writing the same details which are available on MSDN. Instead of writing theory, we will try to learn this function by using a couple of simple puzzles. You try to solve the puzzles using the MSDN and see if you can learn something very quickly. In simple words - SOUNDEX converts an alphanumeric string to a four-character code to find similar-sounding words or names. The first character of the code is the first character of character_expression and the second through fourth characters of the code are numbers that represent the letters in the expression. Vowels incharacter_expression are ignored unless they are the first letter of the string. DIFFERENCE function returns an integer value. The  integer returned is the number of characters in the SOUNDEX values that are the same. The return value ranges from 0 through 4: 0 indicates weak or no similarity, and 4 indicates strong similarity or the same values. Learning Puzzle 1: Now let us run following four queries and observe its output. SELECT SOUNDEX('SQLAuthority') SdxValue SELECT SOUNDEX('SLTR') SdxValue SELECT SOUNDEX('SaLaTaRa') SdxValue SELECT SOUNDEX('SaLaTaRaM') SdxValue When you look at the result set all the four values are same. The reason for all the values to be same is as for SQL Server SOUNDEX function all the four strings are similarly sounding string. Learning Puzzle 2: Now let us run following five queries and observe its output. SELECT DIFFERENCE (SOUNDEX('SLTR'),SOUNDEX('SQLAuthority')) SELECT DIFFERENCE (SOUNDEX('TH'),SOUNDEX('SQLAuthority')) SELECT DIFFERENCE ('SQLAuthority',SOUNDEX('SQLAuthority')) SELECT DIFFERENCE ('SLTR',SOUNDEX('SQLAuthority')) SELECT DIFFERENCE ('SLTR','SQLAuthority') When you look at the result set you will get the result in the ranges from 1 to 4. Here is how it works if your result is 0 which means absolutely not relevant to each other and if your result is 1 which means the results are relevant to each other. Have you ever used above two functions in your business need or on production server? If yes, would you please leave a comment with use cases. I believe it will be beneficial to everyone. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • How do I set up nvidia graphics adapter to put out 1080p, it seems to be using interlace mode>

    - by keepitsimpleengineer
    After upgrading to 12.04, my mythbuntu client/server seems to be running in 1080i, the clue comes from: [ 1176.117] (II) NVIDIA(0): Setting mode "1920x1080_60i" [ 1231.340] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080_60@1920x1080+0+0" This is from Xorg.0.log. This whole thing started from video tearing when watching Mythtv recordings. It didn't happen in 10.10. Should I use "TVStandard" "HD1080p" in the screen section since this is a dedicated HTPC? It only connects to an HDTV (1080p) via hdmi. Here is the current xorg.conf file: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Keyboard0" "CoreKeyboard" # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" FontPath "unix/:7100" EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Device" "/dev/psaux" # Option "Emulate3Buttons" "no" # Option "ZAxisMapping" "4 5" #EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Keyboard0" # Driver "kbd" #EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "SAMSUNG" HorizSync 26.0 - 81.0 VertRefresh 24.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 240" Option "TripleBuffer" "1" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection After a little digging, the question changes slightly, to wit... Per Chapter 19 of nvidia README... "If the EDID for the display device reported a preferred mode timing, and that mode timing is considered a valid mode, then that mode is used as the "nvidia-auto-select" mode." The EDID for my HDMI connected LCD monitor says use first device as preferred. Prefer first detailed timing : Yes Also: (--) NVIDIA(0): EDID maximum pixel clock : 230.0 MHz The list: (from startx -- -verbose 6 ) (--) NVIDIA(0): Detailed Timings: (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 148.50 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125 (--) NVIDIA(0): H/V Polarity : +/+ This is the actual mode selected: (from xorg.0.log) (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 74.18 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1094, 1124 (--) NVIDIA(0): H/V Polarity : +/+ (--) NVIDIA(0): Extra : Interlaced (--) NVIDIA(0): CEA Format : 5 So my HTPC is down-converting to 1080i and then the Monitor is up-converting to 1080p How can I fix this, please?

    Read the article

  • How do I EFI boot Zenbook Prime UX31A from built-in card reader?

    - by Richard Ayotte
    How do I EFI boot Zenbook Prime UX31A from built-in card reader? Ubuntu 12.10 64bit has been copied onto an a SD card which I'm trying to boot from. When I power on my Zenbook and press ESC, the SD card isn't an option. There is an "Add boot option" in the BIOS but it requires a few a things that I'm not quite sure of. Add boot option - I guess any identifier works here. I've been entering ubuntu. Select Filesystem - The only option available is PCI(1F|2)\DevicePath(Type 3, SubType 12)HD(Part1,Sig787e6287-xxxx-xxxx-xxxx-xxxxxxxxxxxx) Path for boot option - I've been entering ubuntu:\EFI\BOOT\BOOTx64.EFI Then I select Create and the new boot option appears in the boot menu but it doesn't work.

    Read the article

  • SQL SERVER – Merge Two Columns into a Single Column

    - by Pinal Dave
    Here is a question which I have received from user yesterday. Hi Pinal, I want to build queries in SQL server that merge two columns of the table If I have two columns like, Column1 | Column2 1                5 2                6 3                7 4                8 I want to output like, Column1 1 2 3 4 5 6 7 8 It is a good question. Here is how we can do achieve the task. I am making the assumption that both the columns have different data and there is no duplicate. USE TempDB GO CREATE TABLE TestTable (Col1 INT, Col2 INT) GO INSERT INTO TestTable (Col1, Col2) SELECT 1, 5 UNION ALL SELECT 2, 6 UNION ALL SELECT 3, 7 UNION ALL SELECT 4, 8 GO SELECT Col1 FROM TestTable UNION SELECT Col2 FROM TestTable GO DROP TABLE TestTable GO Here is the original table. Here is the result table. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • Getting a Temporary Table Returned from from Dynamic SQL in SQL Server 05, and parsing

    - by gloomy.penguin
    So I was requested to make a few things.... (it is Monday morning and for some reason this whole thing is turning out to be really hard for me to explain so I am just going to try and post a lot of my code; sorry) First, I needed a table: CREATE TABLE TICKET_INFORMATION ( TICKET_INFO_ID INT IDENTITY(1,1) NOT NULL, TICKET_TYPE INT, TARGET_ID INT, TARGET_NAME VARCHAR(100), INFORMATION VARCHAR(MAX), TIME_STAMP DATETIME DEFAULT GETUTCDATE() ) -- insert this row for testing... INSERT INTO TICKET_INFORMATION (TICKET_TYPE, TARGET_ID, TARGET_NAME, INFORMATION) VALUES (1,1,'RT_ID','IF_ID,int=1&IF_ID,int=2&OTHER,varchar(10)=val,ue3&OTHER,varchar(10)=val,ue4') The Information column holds data that needs to be parsed into a table. This is where I am having problems. In the resulting table, Target_Name needs to become a column that holds Target_ID as a value for each row in the resulting table. The string that needs to be parsed is in this format: @var_name1,@var_datatype1=@var_value1&@var_name2,@var_datatype2=@var_value2&@var_name3,@var_datatype3=@var_value3 And what I ultimately need as a result (in a table or table variable): RT_ID IF_ID OTHER 1 1 val,ue3 1 2 val,ue3 1 1 val,ue4 1 2 val,ue4 And I need to be able to join on the result. Initially, I was just going to make this a function that returns a table variable but for some reason I can't figure out how to get it into an actual table variable. Whatever parses the string needs to be able to be used directly in queries so I don't think a stored procedure is really the right thing to be using. This is the code that parses the Information string... it returns in a temporary table. -- create/empty temp table for var_name, var_type and var_value fields if OBJECT_ID('tempdb..#temp') is not null drop table #temp create table #temp (row int identity(1,1), var_name varchar(max), var_type varchar(30), var_value varchar(max)) -- just setting stuff up declare @target_name varchar(max), @target_id varchar(max), @info varchar(max) set @target_name = (select target_name from ticket_information where ticket_info_id = 1) set @target_id = (select target_id from ticket_information where ticket_info_id = 1) set @info = (select information from ticket_information where ticket_info_id = 1) --print @info -- some of these variables are re-used later declare @col_type varchar(20), @query varchar(max), @select as varchar(max) set @query = 'select ' + @target_id + ' as ' + @target_name + ' into #target; ' set @select = 'select * into ##global_temp from #target' declare @var_name varchar(100), @var_type varchar(100), @var_value varchar(100) declare @comma_pos int, @equal_pos int, @amp_pos int set @comma_pos = 1 set @equal_pos = 1 set @amp_pos = 0 -- while loop to parse the string into a table while @amp_pos < len(@info) begin -- get new comma position set @comma_pos = charindex(',',@info,@amp_pos+1) -- get new equal position set @equal_pos = charindex('=',@info,@amp_pos+1) -- set stuff that is going into the table set @var_name = substring(@info,@amp_pos+1,@comma_pos-@amp_pos-1) set @var_type = substring(@info,@comma_pos+1,@equal_pos-@comma_pos-1) -- get new ampersand position set @amp_pos = charindex('&',@info,@amp_pos+1) if @amp_pos=0 or @amp_pos<@equal_pos set @amp_pos = len(@info)+1 -- set last variable for insert into table set @var_value = substring(@info,@equal_pos+1,@amp_pos-@equal_pos-1) -- put stuff into the temp table insert into #temp (var_name, var_type, var_value) values (@var_name, @var_type, @var_value) -- is this a new field? if ((select count(*) from #temp where var_name = (@var_name)) = 1) begin set @query = @query + ' create table #' + @var_name + '_temp (' + @var_name + ' ' + @var_type + '); ' set @select = @select + ', #' + @var_name + '_temp ' end set @query = @query + ' insert into #' + @var_name + '_temp values (''' + @var_value + '''); ' end if OBJECT_ID('tempdb..##global_temp') is not null drop table ##global_temp exec (@query + @select) --select @query --select @select select * from ##global_temp Okay. So, the result I want and need is now in ##global_temp. How do I put all of that into something that can be returned from a function (or something)? Or can I get something more useful returned from the exec statement? In the end, the results of the parsed string need to be in a table that can be joined on and used... Ideally this would have been a view but I guess it can't with all the processing that needs to be done on that information string. Ideas? Thanks!

    Read the article

  • Iteration, or copying in XSL, based on a count. How do I do it?

    - by LOlliffe
    I'm trying to create an inventory list (tab-delimited text, for the output) from XML data. The catch is, I need to take the line that I created, and list it multiple times (iterate ???), based on a number found in the XML. So, from the XML below: <?xml version="1.0" encoding="UTF-8"?> <library> <aisle label="AA"> <row>bb</row> <shelf>a</shelf> <books>4</books> </aisle> <aisle label="BB"> <row>cc</row> <shelf>d</shelf> <books>3</books> </aisle> </library> I need to take the value found in "books", and then copy the text line that number of times. The result looking like this: Aisle Row Shelf Titles AA bb a AA bb a AA bb a AA bb a BB cc d BB cc d BB cc d So that the inventory taker, can then write in the titles found on each shelf. I have the basic structure of my XSL, but I'm not sure how to do the "iteration" portion. <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xs="http://www.w3.org/2001/XMLSchema" exclude-result-prefixes="xs" xmlns:xd="http://www.oxygenxml.com/ns/doc/xsl" version="2.0"> <xsl:output omit-xml-declaration="yes"/> <xsl:variable name="tab" select="'&#09;'"/> <xsl:variable name="newline" select="'&#10;'"/> <xsl:template match="/"> <!-- Start Spreadsheet header --> <xsl:text>Aisle</xsl:text> <xsl:value-of select="$tab"/> <xsl:text>Row</xsl:text> <xsl:value-of select="$tab"/> <xsl:text>Shelf</xsl:text> <xsl:value-of select="$tab"/> <xsl:text>Titles</xsl:text> <xsl:value-of select="$newline"/> <!-- End spreadsheet header --> <!-- Start entering values from XML --> <xsl:for-each select="library/aisle"> <xsl:value-of select="@label"/> <xsl:value-of select="$tab"/> <xsl:value-of select="row"/> <xsl:value-of select="$tab"/> <xsl:value-of select="shelf"/> <xsl:value-of select="$tab"/> <xsl:value-of select="$tab"/> <xsl:value-of select="$newline"/> </xsl:for-each> <!-- End of values from XML --> <!-- Iteration of the above needed, based on count value in "books" --> </xsl:template> </xsl:stylesheet> Any help would be greatly appreciated. For starters, is "iteration" the right term to be using for this? Thanks!

    Read the article

  • Merge functionality of two xsl files into a single file (not a xsl import or include issue)

    - by anuamb
    I have two xsl files; both of them perform different tasks on source xml one after another. Now I need a single xsl file which will actually perform both these tasks in single file (its not an issue of xsl import or xsl include): say my source xml is: <LIST_R7P1_1 <R7P1_1 <LVL2 <ORIG_EXP_PRE_CONV#+# <EXP_AFT_CONVabc <GUARANTEE_AMOUNT#+# <CREDIT_DER/ </LVL2 <LVL21 <AZ#+# <BZbz1 <AZaz2 <BZ#+# <CZ/ </LVL21 </R7P1_1 </LIST_R7P1_1 My first xsl (tr1.xsl) removes all nodes whose value is blank or null: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:template match="@*|node()"> <xsl:if test=". != '' or ./@* != ''"> <xsl:copy> <xsl:apply-templates select="@*|node()"/> </xsl:copy> </xsl:if> <xsl:template </xsl:stylesheet The output here is <LIST_R7P1_1 <R7P1_1 <LVL2 <ORIG_EXP_PRE_CONV#+# <EXP_AFT_CONVabc <GUARANTEE_AMOUNT#+# </LVL2 <LVL21 <AZ#+# <BZbz1 <AZaz2 <BZ#+# </LVL21 </R7P1_1 </LIST_R7P1_1 And my second xsl (tr2.xsl) does a global replace (of #+# with text blank'') on the output of first xsl: <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" <xsl:template name="globalReplace" <xsl:param name="outputString"/ <xsl:param name="target"/ <xsl:param name="replacement"/ <xsl:choose <xsl:when test="contains($outputString,$target)"> <xsl:value-of select= "concat(substring-before($outputString,$target), $replacement)"/> <xsl:call-template name="globalReplace"> <xsl:with-param name="outputString" select="substring-after($outputString,$target)"/> <xsl:with-param name="target" select="$target"/> <xsl:with-param name="replacement" select="$replacement"/> </xsl:call-template> </xsl:when> <xsl:otherwise> <xsl:value-of select="$outputString"/> </xsl:otherwise> </xsl:choose </xsl:template <xsl:template match="text()" <xsl:template match="@*|*"> <xsl:copy> <xsl:apply-templates select="@*|node()"/> </xsl:copy> </xsl:template> </xsl:stylesheet So my final output is <LIST_R7P1_1 <R7P1_1 <LVL2 <ORIG_EXP_PRE_CONV <EXP_AFT_CONVabc <GUARANTEE_AMOUNT </LVL2 <LVL21 <AZ <BZbz1 <AZaz2 <BZ </LVL21 </R7P1_1 </LIST_R7P1_1 My concern is that instead of these two xsl (tr1.xsl and tr2.xsl) I only need a single xsl (tr.xsl) which gives me final output? Say when I combine these two as <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" <xsl:template match="@*|node()" <xsl:if test=". != '' or ./@* != ''"> <xsl:copy> <xsl:apply-templates select="@*|node()"/> </xsl:copy> </xsl:if> <xsl:template name="globalReplace" <xsl:param name="outputString"/ <xsl:param name="target"/ <xsl:param name="replacement"/ <xsl:choose <xsl:when test="contains($outputString,$target)"> <xsl:value-of select= "concat(substring-before($outputString,$target), $replacement)"/> <xsl:call-template name="globalReplace"> <xsl:with-param name="outputString" select="substring-after($outputString,$target)"/> <xsl:with-param name="target" select="$target"/> <xsl:with-param name="replacement" select="$replacement"/> </xsl:call-template> </xsl:when> <xsl:otherwise> <xsl:value-of select="$outputString"/> </xsl:otherwise> </xsl:choose </xsl:template <xsl:template match="text()" <xsl:call-template name="globalReplace" <xsl:with-param name="outputString" select="."/ <xsl:with-param name="target" select="'#+#'"/ <xsl:with-param name="replacement" select="''"/ </xsl:call-template </xsl:template <xsl:template match="@|" <xsl:copy <xsl:apply-templates select="@*|node()"/ </xsl:copy </xsl:template </xsl:stylesheet it outputs: <LIST_R7P1_1 <R7P1_1 <LVL2 <ORIG_EXP_PRE_CONV <EXP_AFT_CONVabc <GUARANTEE_AMOUNT <CREDIT_DER/ </LVL2 <LVL21 <AZ <BZbz1 <AZaz2 <BZ <CZ/ </LVL21 </R7P1_1 </LIST_R7P1_1 Only replacement is performed but not null/blank node removal.

    Read the article

  • Designing an API with compile-time option to remove first parameter to most functions and use a glob

    - by tomlogic
    I'm trying to design a portable API in ANSI C89/ISO C90 to access a wireless networking device on a serial interface. The library will have multiple network layers, and various versions need to run on embedded devices as small as an 8-bit micro with 32K of code and 2K of data, on up to embedded devices with a megabyte or more of code and data. In most cases, the target processor will have a single network interface and I'll want to use a single global structure with all state information for that device. I don't want to pass a pointer to that structure through the network layers. In a few cases (e.g., device with more resources that needs to live on two networks) I will interface to multiple devices, each with their own global state, and will need to pass a pointer to that state (or an index to a state array) through the layers. I came up with two possible solutions, but neither one is particularly pretty. Keep in mind that the full driver will potentially be 20,000 lines or more, cover multiple files, and contain hundreds of functions. The first solution requires a macro that discards the first parameter for every function that needs to access the global state: // network.h typedef struct dev_t { int var; long othervar; char name[20]; } dev_t; #ifdef IF_MULTI #define foo_function( x, a, b, c) _foo_function( x, a, b, c) #define bar_function( x) _bar_function( x) #else extern dev_t DEV; #define IFACE (&DEV) #define foo_function( x, a, b, c) _foo_function( a, b, c) #define bar_function( x) _bar_function( ) #endif int bar_function( dev_t *IFACE); int foo_function( dev_t *IFACE, int a, long b, char *c); // network.c #ifndef IF_MULTI dev_t DEV; #endif int bar_function( dev_t *IFACE) { memset( IFACE, 0, sizeof *IFACE); return 0; } int foo_function( dev_t *IFACE, int a, long b, char *c) { bar_function( IFACE); IFACE->var = a; IFACE->othervar = b; strcpy( IFACE->name, c); return 0; } The second solution defines macros to use in the function declarations: // network.h typedef struct dev_t { int var; long othervar; char name[20]; } dev_t; #ifdef IF_MULTI #define DEV_PARAM_ONLY dev_t *IFACE #define DEV_PARAM DEV_PARAM_ONLY, #else extern dev_t DEV; #define IFACE (&DEV) #define DEV_PARAM_ONLY void #define DEV_PARAM #endif int bar_function( DEV_PARAM_ONLY); // I don't like the missing comma between DEV_PARAM and arg2... int foo_function( DEV_PARAM int a, long b, char *c); // network.c #ifndef IF_MULTI dev_t DEV; #endif int bar_function( DEV_PARAM_ONLY) { memset( IFACE, 0, sizeof *IFACE); return 0; } int foo_function( DEV_PARAM int a, long b, char *c) { bar_function( IFACE); IFACE->var = a; IFACE->othervar = b; strcpy( IFACE->name, c); return 0; } The C code to access either method remains the same: // multi.c - example of multiple interfaces #define IF_MULTI #include "network.h" dev_t if0, if1; int main() { foo_function( &if0, -1, 3.1415926, "public"); foo_function( &if1, 42, 3.1415926, "private"); return 0; } // single.c - example of a single interface #include "network.h" int main() { foo_function( 11, 1.0, "network"); return 0; } Is there a cleaner method that I haven't figured out? I lean toward the second since it should be easier to maintain, and it's clearer that there's some macro magic in the parameters to the function. Also, the first method requires prefixing the function names with "_" when I want to use them as function pointers. I really do want to remove the parameter in the "single interface" case to eliminate unnecessary code to push the parameter onto the stack, and to allow the function to access the first "real" parameter in a register instead of loading it from the stack. And, if at all possible, I don't want to have to maintain two separate codebases. Thoughts? Ideas? Examples of something similar in existing code? (Note that using C++ isn't an option, since some of the planned targets don't have a C++ compiler available.)

    Read the article

  • Why is Word 2007 not allowing me to select and edit text?

    - by CT
    I have just installed Office 2007 for a user. Word is acting strangely. If I open a document. The cursor just stays at the top left of the document and I can not place it anywhere else. I cannot select other text. I cannot write additional text. If I simply open up Word and start a new document I am allowed to type like normal. If I were to save and close this document and reopen it. I would not be able to input anything. Seems like I am stuck in some wrong input mode? I have already tried uninstalling and reinstalling. Any ideas?

    Read the article

  • How can I force Firefox to select the tab to the right on tab close?

    - by Philip
    I'm using TMP 0.3.8.2 and a host of other extensions on FF 3.6.3 on OSX 10.6. I've tried disabling all other extensions that might interfere with tab settings but it's hard to keep track of everything because I have literally 60 (about 30 are disabled though) that are on and off in various configurations. I'm wondering if there's a way to FORCE Firefox to select the tab to the right on closing a tab, in such a way that it overrides any other setting anywhere else. I realize the prospects for this are dim. Thanks.

    Read the article

  • how to block select, move, copy, paste in vi?

    - by gojira
    I am trying to migrate from Notepad++ to vi. In N++, I constantly rely on block edit (or "column mode"), as it is a great increase in productivity: I can select a rectangular area of text by pressing ALT before marking with the mouse, and copy, move, paste the rectangular area anywhere. Also, it is possible to drag the cursor vertically so that I can type simulatenously on several subsequent lines at the same time. Is there any similar functionality for vi? If yes, how can I do that?

    Read the article

  • How to select File menu in Mac, just like Alt + F in Windows?

    - by pal4life
    I have a Macbook Air with Mac OSX 10.8.2 . I have been wondering how do I select the File Menu which I am so used to doing in Windows using Alt + F, so that I do not have to click on the File menu each time I need to do something. I googled and checked out a bunch of articles as well. This wikipedia article suggests http://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts CTRL +F2 then F. I tried this in Sublime Text and did not work for me. Any clues? Thanks.

    Read the article

  • What does SQL Server do if you select more than 1 full backup when doing a restore?

    - by Rob Sobers
    I have a backup file that contains 2 backup sets. Both backup sets are full backups. When I open SQL Server Management Studio and choose "Restore..." and pick the file as my device, it lets me pick both backup sets. The restore operation completes without error, but I'm not sure exactly what SQL server did. Did it restore the first one, drop the database, and then restore the second one? Will it always let the most recent full backup prevail? It doesn't seem to make sense for SQL server to even allow you to select more than one full backup.

    Read the article

  • Gnome+NX clipboard behavior; auto-copy on select?

    - by threecheeseopera
    I am having issues with the Gnome(/Linux/Debian+Ubuntu) clipboard when connected remotely; it's default behavior appears to be to automatically add text to a clipboard buffer when that text is selected. This is not usually a problem, until I need to log into one of these systems remotely (w/ GUI), and attempt to use a shared clipboard. If I 'copy' text on the local machine (destined to replace some text on the remote machine), that copy buffer is overwritten as soon as I select the text on the remote machine to be replaced. Is there some way around this? It sort of drives me nuts. Thanks! UPDATE: This is really an NX server issue; X11 supports multiple clipboards ("selections": clipboard, primary. secondary; see this excellent article) that behave differently, and it appears that my problem is related to how NX server translates this over to the host machine.

    Read the article

  • How can I modify the BAT file in this post so it will randomly select 1 background contained in a folder containing multiple backgrounds?

    - by Radical924
    Is there a way to modify the bat file from this post here: How do I set the desktop background on Windows from a script? so that it will randomly select 1 background image from a folder containing multiple images??? AND I would also like the background to randomly change to one of the backgrounds randomly contained in the same folder. If this is possible how would I modify the bat file below??? @echo off reg add "hkcu\control panel\desktop" /v wallpaper /t REG_SZ /d "" /f reg add "hkcu\control panel\desktop" /v wallpaper /t REG_SZ /d "C:\[LOCATION OF WALLPAPER HERE]" /f reg delete "hkcu\Software\Microsoft\Internet Explorer\Desktop\General" /v WallpaperStyle /f reg add "hkcu\control panel\desktop" /v WallpaperStyle /t REG_SZ /d 2 /f RUNDLL32.EXE user32.dll,UpdatePerUserSystemParameters exit Also I noticed that this bat file won't work usually (9 times out of 10)... I receive an "ERROR: The system was unable to find the specified registry key or value." I have Windows 7 64-BIT Home Premium Service Pack 1

    Read the article

  • How to select the page range to print in Windows 8 Modern UI apps?

    - by Magnetic_dud
    Today I wanted to print an email from the Mail app (modern UI). I selected devices from the charms bar, and I chose my printer. The problem is that it was a very long email (a 40 replies unthreaded email), and I only needed the first page. It looks like there is no way to select a page range in the simple printing dialog, am I right? I solved the problem by inserting just one page in the printer and then deleting the job, but this is not a real fix... (I could print to a PDF printer, then open in Acrobat and print again, but...)

    Read the article

  • How can I select multiple windows to tile in Window 7 (like you could in previous versions)?

    - by Daniel
    I've disabled Aero Snap, is there any way to restore the old method of window arrangement allowing you to do side by side, or top and bottom, etc.? All you had to do before is select the windows you want and right click. I know the menu is still there in Windows 7 but it is only for the whole Task Bar, and you can also do it from the Task Manager but that is more complex to get too. After looking all around I cannot find a way to restore any such right click menu for each application. Is there a way to tile like this for individual windows or groups?

    Read the article

  • Win xp reinstall now I am unable to connect to broadband what shall I select to do this?

    - by waterfallrain
    Hello, My hardrive was failing so I needed to reinstall win xp. I completed the reinstall and the drivers but now only the wireless connection works. The broadband states connected but does not go out to the interenet. When I click Internet Explorer it says unable to find webpage. I have tried several major sites so I know its not the site but some configuration or something I need to do on my end. When I go to the cmd prompt and renew the ip it refers to my wireless nothing about this broadband connection. What do I type/select to get this to go out to the Internet. The broadband is working for my other laptop so I know the connection is not the issue. Any help would be much appreciated thank you.

    Read the article

  • Windows XP reinstall, now I am unable to connect to broadband what shall I select to do this?

    - by waterfallrain
    My hardrive was failing so I needed to reinstall Windows XP. I completed the reinstall and the drivers but now only the wireless connection works. The broadband states connected but does not go out to the Internet. When I click Internet Explorer it says unable to find webpage. I have tried several major sites so I know it's not the site but some configuration or something I need to do on my end. When I go to the command prompt and renew the IP address it refers to my wireless, nothing about this broadband connection. What do I type/select to get this to go out to the Internet. The broadband is working for my other laptop so I know the connection is not the issue. Any help would be much appreciated.

    Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >