Search Results

Search found 107501 results on 4301 pages for 'ubuntu server'.

Page 132/4301 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• SQL SERVER – Storing Variable Values in Temporary Array or Temporary List

  - by pinaldave

  SQL Server does not support arrays or a dynamic length storage mechanism like list. Absolutely there are some clever workarounds and few extra-ordinary solutions but everybody can;t come up with such solution. Additionally, sometime the requirements are very simple that doing extraordinary coding is not required. Here is the simple case. Let us say here are the values: a, 10, 20, c, 30, d. Now the requirement is to store them in a array or list. It is very easy to do the same in C# or C. However, there is no quick way to do the same in SQL Server. Every single time when I get such requirement, I create a table variable and store the values in the table variables. Here is the example: For SQL Server 2012: DECLARE @ListofIDs TABLE(IDs VARCHAR(100)); INSERT INTO @ListofIDs VALUES('a'),('10'),('20'),('c'),('30'),('d'); SELECT IDs FROM @ListofIDs; GO When executed above script it will give following resultset. Above script will work in SQL Server 2012 only for SQL Server 2008 and earlier version run following code. DECLARE @ListofIDs TABLE(IDs VARCHAR(100), ID INT IDENTITY(1,1)); INSERT INTO @ListofIDs SELECT 'a' UNION ALL SELECT '10' UNION ALL SELECT '20' UNION ALL SELECT 'c' UNION ALL SELECT '30' UNION ALL SELECT 'd'; SELECT IDs FROM @ListofIDs; GO Now in this case, I have to convert numbers to varchars because I have to store mix datatypes in a single column. Additionally, this quick solution does not give any features of arrays (like inserting values in between as well accessing values using array index). Well, do you ever have to store temporary multiple values in SQL Server – if the count of values are dynamic and datatype is not specified early how will you about storing values which can be used later in the programming. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Dedicated server: managed hosting or manage it myself?

  - by ddawber

  We're currently hosting a number of sites on a self-managed dedicated server. Some companies, however, offer a managed dedicated server hosting service. They offer: Roughly the same server spec Ticketing system support Managed daily backups Virtual firewall (but with a limit of 10 IP addresses allowed through at any one time) Now, this managed hosting is at extra expense - somewhere in the region of $500 per month, and the limit on the number of IP addresses they'll manage on the firewall is also a real pain. My thinking is it would be better and cheaper to Stay with the same host since the dedicated box is fine Get an Amazon AWS account and use their server to manage backups; there are a number of good tools that can be used to automate the process Configure iptables so that I have complete control of the firewall I want to know Is a managed virtual firewall likely to be more secure than me configuring iptables? Whether, in your opinion, it's best to let someone else take care of backups? If, from your experience, there's anything else i'm missing that warrants using managed hosting over a DIY service? I think there is some reluctance to not having managed hosting since a managed host in effect takes responsibility for your server, whereas any hardware or security issues with a server that we manage would mean we are forced to hold our hands up when a client site goes down. That said, I personally don't think a managed host does that much in the day to day running of your server (backups are automatic, OS updates are carried out with ease, etc.).

  Read the article

• Dedicated server: managed hosting or manage it myself?

  - by ddawber

  We're currently hosting a number of sites on a self-managed dedicated server. Some companies, however, offer a managed dedicated server hosting service. They offer: Roughly the same server spec Ticketing system support Managed daily backups Virtual firewall (but with a limit of 10 IP addresses allowed through at any one time) Now, this managed hosting is at extra expense - somewhere in the region of $500 per month, and the limit on the number of IP addresses they'll manage on the firewall is also a real pain. My thinking is it would be better and cheaper to Stay with the same host since the dedicated box is fine Get an Amazon AWS account and use their server to manage backups; there are a number of good tools that can be used to automate the process Configure iptables so that I have complete control of the firewall I want to know Is a managed virtual firewall likely to be more secure than me configuring iptables? Whether, in your opinion, it's best to let someone else take care of backups? If, from your experience, there's anything else i'm missing that warrants using managed hosting over a DIY service? I think there is some reluctance to not having managed hosting since a managed host in effect takes responsibility for your server, whereas any hardware or security issues with a server that we manage would mean we are forced to hold our hands up when a client site goes down. That said, I personally don't think a managed host does that much in the day to day running of your server (backups are automatic, OS updates are carried out with ease, etc.).

  Read the article

• Server Setups for Agencies [closed]

  - by styks1987

  We are considering consolidating our server administration by cutting down on the number of systems we currently use to manage all our websites(~65 websites). Currently we have a testing server and 3 production servers. (2 - cherokee(linode), 1 - apache (mt)) We don't have a dedicated server admin, so I am stuck with managing all these servers, and as a developer, I don't want to deal with all the server hassle. So my main goal is to cut down on the time spent messing with the servers. We have looked at Pagoda Box and AppFog as possibilities. I am not sure if Pagoda Box would be cost effective. With 65+ websites we may end up paying anywhere from 0 to $50+ per website per month. Right now we page about $250 per month for the 4 VPS servers mentioned above. We already use Capistrano for deployment. I have the opportunity to completely overhaul the entire setup and I would like some feedback on where you found your information for large scale server management or how you currently do it. Articles are welcome. In summary: What is new (past 2 years) in simple server management arena? If you work at an agency or have had agency experience, how do/did you manage your sites? a. What is the level of effort for SSL, new site setup, database management, and extension management. b. How did you handle datacenter outages. Anyone with Pagoda Box experience, do you like it and did you have problems with Wordpress, Cakephp, Drupal, Expression Engine or Magento? a. Is it expensive for you? b. How has server uptime been? Your direction and comments are greatly appreciated.

  Read the article

• TRY CATCH with Linked Server in SQL Server 2005 Not Working

  - by Robert Stanley

  Hello, I am trying to catch sql error raised when I execute a stored procedure on a linked server. Both Servers are running SQL Server 2005. To prove the issue I have created a stored procedure on the linked server called Raise error that executes the following code: RAISERROR('An error', 16, 1); If I execute the stored procedure directly on the linked server using the following code I get a result set with 'An error', '16' as expected (ie the code enters the catch block): BEGIN TRY EXEC [dbo].[RaiseError]; END TRY BEGIN CATCH DECLARE @ErrMsg nvarchar(4000), @ErrSeverity int; SELECT @ErrMsg = ERROR_MESSAGE(), @ErrSeverity = ERROR_SEVERITY(); SELECT @ErrMsg, @ErrSeverity; END CATCH If I run the following code on my local server to execute the stored procedure on the linked server then SSMS gives me the message 'Query completed with errors', .Msg 50000, Level 16, State 1, Procedure RaiseError, Line 13 An error' BEGIN TRY EXEC [Server].[Catalog].[dbo].RaiseError END TRY BEGIN CATCH DECLARE @SPErrMsg nvarchar(4000), @SPErrSeverity int; SELECT @SPErrMsg = ERROR_MESSAGE(), @SPErrSeverity = ERROR_SEVERITY(); SELECT @SPErrMsg, @SPErrSeverity; END CATCH My Question is can I catch the error generated when the Linked server stored procedure executes? Thanks in advance!

  Read the article

• Using a .MDF SQL Server Database with ASP.NET Versus Using SQL Server

  - by Maxim Z.

  I'm currently writing a website in ASP.NET MVC, and my database (which doesn't have any data in it yet, it only has the correct tables) uses SQL Server 2008, which I have installed on my development machine. I connect to the database out of my application by using the Server Explorer, followed by LINQ to SQL mapping. Once I finish developing the site, I will move it over to my hosting service, which is a virtual hosting plan. I'm concerned about whether using the SQL Server setup that is currently working on my development machine will be hard to do on the production server, as I'll have to import all the database tables through the hosting control panel. I've noticed that it is possible to create a SQL Server database from inside Visual Studio. It is then stored in the App_Data directory. My questions are the following: Does it make sense to move my SQL Server DB out of SQL Server and into the App_Data directory as an .mdf file? If so, how can I move it? I believe this is called the Detach command, is it not? Are there any performance/security issues that can occur with a .mdf file like this? Would my intended setup work OK with a typical virtual hosting plan? I'm hoping that the .mdf database won't count against the limited number of SQL Server databases that can be created with my plan. I hope this question isn't too broad. Thanks in advance! Note: I'm just starting out with ASP.NET MVC and all this, so I might be completely misunderstanding how this is supposed to work.

  Read the article

• VS2008 adding SQL Server Database (SQL Server 2008 Mgmt Studio) not working

  - by Kahn

  I'm trying to practice using the ASP.Net MVC at home, but I ran into an impossible problem. I cannot open a connection to SQL Server 2008, I get this error: "Connections to SQL Server files (*.mdf) require SQL Server Express 2005 to function properly. ..." I've googled around for numerous responses, none of them either working or addressing this issue. I'm running Vista 32bit, my SQL Server 2008 Mgmt Studio is also 32bit, I have SP1 installed both on VS2008 Professional, as well as the SQL Server. I changed the machine.config connectionStrings from ./SQLExpress to my SQL Server 2008 name. Now if I connect manually through web.config, in an asp:datasource or code-behind, everything works fine. But for some reason trying to add a DB Connection directly like this always gets the error. This is pretty fatal, since I can't rightly do much unless I can use LINQ to SQL with my MVC test project, and this is the only way I know how. Worked fine in school and work, but not at home. Installing SQL Server Express 2005, as some have suggested, is not an option. Obviously it HAS to work with SQL Server 2008. Thanks in advance.

  Read the article

• Problems with sp_addlinkedserver in MSSQL 2000

  - by manneorama

  Hi! I'm having a bit of a problem with moving specific data from one server running MSSQL 2000 (A) and another running MSSQL 2008 (B). I'm writing a script according to customer specifications which is to be executed on A, populating tables in B with data. However, I can't seem to get the server link to work. -- Bunch of declarations here EXEC sp_addlinkedserver @server = @ServerName, @srvproduct = @ServerProduct, @provider = @ProviderString, @datasrc = @RemoteHost -- Data migration stuff here EXEC sp_dropserver @ServerName Now if I run the script in its entirety I get an error saying: Msg 7202, Level 11, State 2, Line 55 Could not find server 'remoteServer' in sysservers. Execute sp_addlinkedserver to add the server to sysservers. However, if I higlight only the sp_addlinkedserver-part and execute that, there is no error and I can highlight the rest of the script and run it. What am I missing here? Please help! PS. If backup-restore was an option, I would have done that already.

  Read the article

• Gnome Install Error (1) [closed]

  - by Guy1984

  I'm trying to install Gnome on my Ubuntu 12.04 P.Pangolin and getting the following errors: root@***:~# sudo apt-get install gnome-core gnome-session-fallback Reading package lists... Done Building dependency tree Reading state information... Done gnome-core is already the newest version. gnome-session-fallback is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded. 5 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up bluez (4.98-2ubuntu7) ... start: Job failed to start invoke-rc.d: initscript bluetooth, action "start" failed. dpkg: error processing bluez (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of gnome-bluetooth: gnome-bluetooth depends on bluez (>= 4.36); however: Package bluez is not configured yet. dpkg: error processing gnome-bluetooth (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gnome-shell: gnome-shell depends on gnome-bluetooth (>= 3.0.0); however: Package gnome-bluetooth is not configured yet. dpkg: error processing gnome-shell (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gnome-user-share: gnome-user-share depends on gnome-bluetooth; however: Package gnome-bluetooth is not configured yet. dpkg: error processing gnome-user-share (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gnome-core: gnome-core depends on gNo apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already nome-bluetooth (>= 3.0); however: Package gnome-bluetooth is not configured yet. gnome-core depends on gnome-shell (>= 3.0); however: Package gnome-shell is not configured yet. gnome-core depends on gnome-user-share (>= 3.0); however: Package gnome-user-share is not configured yet. dpkg: error processing gnome-core (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: bluez gnome-bluetooth gnome-shell gnome-user-share gnome-core E: Sub-process /usr/bin/dpkg returned an error code (1) Any thoughts?

  Read the article

• unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

  - by jon

  I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

  Read the article

• What is the best server manufacturer for Debian/Ubuntu server ?

  - by Kedare

  Hello, I am looking for rackable servers that will run on Debian or Ubuntu Server with a manufactuer that provide .deb files for the systems tools (Like OpenManage or Insight Manager). It looks like HP provide .deb for its last servers, but Dell does not... What manufacturer do you have on your Debian/Ubuntu server ? What do you recommend ? Thank you ;)

  Read the article

• Ubuntu server; Backup of server and MySql database, and Solr database

  - by Camran

  How is backup done on ubuntu servers? I have a server (Ubuntu 9.10) which has apache2 installed, php5, mysql etc... The website is a classifieds website where all classifieds are stored in mysql and Solr. I need to backup this server with all information to be able to fully restore it if something goes wrong. How should I start? Is it an automated task, or will I do backups manually? (prefer manually) Thanks

  Read the article

• Status of Data in Rollback of Large Transaction in SQL Server

  - by Lloyd Banks

  I have a data warehousing procedure that downloads and replaces dozens of tables from a linked server to a local database. Every once in a while, the code will get stuck on one of the tables on the linked server because the table on the linked server is in a state of transition. I am under the assumption that since the entire procedure is considered one transaction commit, when the procedure gets stuck, none of the changes made by the procudure so far would have committed. But the opposite seems to be true, tables that were "downloaded" before the procedure got stuck would have been updated with today's versions on the local server. Shouldn't SQL Server wait for the entire procedure to finish before the changes are durable? CREATE PROCEDURE MYIMPORT AS BEGIN SET NOCOUNT ON IF EXISTS (SELECT * FROM INFORMATION.SCHEMA.TABLES WHERE TABLE_NAME = 'TABLE1') DROP TABLE TABLE1 SELECT COLUMN1, COLUMN2, COLUMN3 INTO TABLE1 FROM OPENQUERY(MYLINK, 'SELECT COLUMN1, COLUMN2, COLUMN3 FROM TABLE1') IF EXISTS (SELECT * FROM INFORMATION.SCHEMA.TABLES WHERE TABLE_NAME = 'TABLE2') DROP TABLE TABLE2 SELECT COLUMN1, COLUMN2, COLUMN3 INTO TABLE2 FROM OPENQUERY(MYLINK, 'SELECT COLUMN1, COLUMN2, COLUMN3 FROM TABLE2') --IF THE PROCEDURE GETS STUCK HERE, THEN CHANGES TO TABLE1 WOULD HAVE BEEN MADE ON THE LOCAL SERVER WHILE NO CHANGES WOULD HAVE BEEN MADE TO TABLE3 ON THE LOCAL SERVER IF EXISTS (SELECT * FROM INFORMATION.SCHEMA.TABLES WHERE TABLE_NAME = 'TABLE3') DROP TABLE TABLE3 SELECT COLUMN1, COLUMN2, COLUMN3 INTO TABLE3 FROM OPENQUERY(MYLINK, 'SELECT COLUMN1, COLUMN2, COLUMN3 FROM TABLE3') END

  Read the article

• SQL SERVER – Spatial Database Queries – What About BLOB – T-SQL Tuesday #006

  - by pinaldave

  Michael Coles is one of the most interesting book authors I have ever met. He has a flair of writing complex stuff in a simple language. There are a very few people like that.  I really enjoyed reading his recent book, Expert SQL Server 2008 Encryption. I strongly suggest taking a look at it. This blog is written in response to T-SQL Tuesday #006: “What About BLOB? by Michael Coles. Spatial Database is my favorite subject. Since I did my TechEd India 2010 presentation, I have enjoyed this subject a lot. Before I continue this blog post, there are a few other blog posts, so I suggest you read them.  To help build the environment run the queries, I am going to present them in this single blog post. SQL SERVER – What is Spatial Database? – Developing with SQL Server Spatial and Deep Dive into Spatial Indexing This blog post explains the basics of Spatial Database and also provides a good introduction to Indexing concept. SQL SERVER – World Shapefile Download and Upload to Database – Spatial Database This blog post will enable you with how to load the shape file into database. SQL SERVER – Spatial Database Definition and Research Documents This blog post links to the white paper about Spatial Database written by Microsoft experts. SQL SERVER – Introduction to Spatial Coordinate Systems: Flat Maps for a Round Planet This blog post links to the white paper explaining coordinate system, as written by Microsoft experts. After reading the above listed blog posts, I am very confident that you are ready to run the following script. Once you create a database using the World Shapefile, as mentioned in the second link above,you can display the image of India just like the following. Please note that this is not an accurate political map. The boundary of this map has many errors and it is just a representation. You can run the following query to generate the map of India from the database spatial which you have created after following the instructions here. USE Spatial GO -- India Map SELECT [CountryName] ,[BorderAsGeometry] ,[Border] FROM [Spatial].[dbo].[Countries] WHERE Countryname = 'India' GO Now, let us find the longitude and latitude of the two major IT cities of India, Hyderabad and Bangalore. I find their values as the following: the values of longitude-latitude for Bangalore is 77.5833300000 13.0000000000; for Hyderabad, longitude-latitude is 78.4675900000 17.4531200000. Now, let us try to put these values on the India Map and see their location. -- Bangalore DECLARE @GeoLocation GEOGRAPHY SET @GeoLocation = GEOGRAPHY::STPointFromText('POINT(77.5833300000 13.0000000000)',4326).STBuffer(20000); -- Hyderabad DECLARE @GeoLocation1 GEOGRAPHY SET @GeoLocation1 = GEOGRAPHY::STPointFromText('POINT(78.4675900000 17.4531200000)',4326).STBuffer(20000); -- Bangalore and Hyderabad on Map of India SELECT name, [GeoLocation] FROM [IndiaGeoNames] I WHERE I.[GeoLocation].STDistance(@GeoLocation) <= 0 UNION ALL SELECT name, [GeoLocation] FROM [IndiaGeoNames] I WHERE I.[GeoLocation].STDistance(@GeoLocation1) <= 0 UNION ALL SELECT '',[Border] FROM [Spatial].[dbo].[Countries] WHERE Countryname = 'India' GO Now let us quickly draw a straight line between them. DECLARE @GeoLocation GEOGRAPHY SET @GeoLocation = GEOGRAPHY::STPointFromText('POINT(78.4675900000 17.4531200000)',4326).STBuffer(10000); DECLARE @GeoLocation1 GEOGRAPHY SET @GeoLocation1 = GEOGRAPHY::STPointFromText('POINT(77.5833300000 13.0000000000)',4326).STBuffer(10000); DECLARE @GeoLocation2 GEOGRAPHY SET @GeoLocation2 = GEOGRAPHY::STGeomFromText('LINESTRING(78.4675900000 17.4531200000, 77.5833300000 13.0000000000)',4326) SELECT name, [GeoLocation] FROM [IndiaGeoNames] I WHERE I.[GeoLocation].STDistance(@GeoLocation) <= 0 UNION ALL SELECT name, [GeoLocation] FROM [IndiaGeoNames] I1 WHERE I1.[GeoLocation].STDistance(@GeoLocation1) <= 0 UNION ALL SELECT '' name, @GeoLocation2 UNION ALL SELECT '',[Border] FROM [Spatial].[dbo].[Countries] WHERE Countryname = 'India' GO Let us use the distance function of the spatial database and find the straight line distance between this two cities. -- Distance Between Hyderabad and Bangalore DECLARE @GeoLocation GEOGRAPHY SET @GeoLocation = GEOGRAPHY::STPointFromText('POINT(78.4675900000 17.4531200000)',4326) DECLARE @GeoLocation1 GEOGRAPHY SET @GeoLocation1 = GEOGRAPHY::STPointFromText('POINT(77.5833300000 13.0000000000)',4326) SELECT @GeoLocation.STDistance(@GeoLocation1)/1000 'KM'; GO The result of above query is as displayed in following image. As per SQL Server, the distance between these two cities is 501 KM, but according to what I know, the distance between those two cities is around 562 KM by road. However, please note that roads are not straight and they have lots of turns, whereas this is a straight-line distance. What would be more accurate is the distance between these two cities by air travel. When we look at the air travel distance between Bangalore and Hyderabad, the total distance covered is 495 KM, which is very close to what SQL Server has estimated, which is 501 KM. Bravo! SQL Server has accurately provided the distance between two of the cities. SQL Server Spatial Database can be very useful simply because it is very easy to use, as demonstrated above. I appreciate your comments, so let me know what your thoughts and opinions about this are. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Spatial Database

  Read the article

• SQL SERVER – Columnstore Index and sys.dm_db_index_usage_stats

  - by pinaldave

  As you know I have been writing on Columnstore Index for quite a while. Recently my friend Vinod Kumar wrote about  SQL Server 2012: ColumnStore Characteristics. A fantastic read on the subject if you have yet not caught up on that subject. After the blog post I called him and asked what should I write next on this subject. He suggested that I should write on DMV script which I have prepared related to Columnstore when I was writing our SQL Server Questions and Answers book. When we were writing this book SQL Server 2012 CTP versions were available. I had written few scripts related to SQL Server columnstore Index. I like Vinod’s idea and I decided to write about DMV, which we did not cover in the book as SQL Server 2012 was not released yet. We did not want to talk about the product which was not yet released. The first script which I had written was with DMV - sys.column_store_index_stats. This DMV was displaying the statistics of the columnstore indexes. When I attempted to run it on SQL Server 2012 RTM it gave me error suggesting that this DMV does not exists. Here is the script which I ran: SELECT * FROM sys.column_store_index_stats; It generated following error: Msg 208, Level 16, State 1, Line 1 Invalid object name ‘column_store_index_stats’. I was pretty confident that this DMV was available when I had written the scripts. The next reaction was to type ‘sys.’ only in SSMS and wait for intelisense to popup DMV list. I scrolled down and noticed that above said DMV did not exists there as well. Now this is not bug or missing feature. This was indeed something can happen because the version which I was practicing was early CTP version. If you go to the page of the DMV here, it clearly stats notice on the top of the page. This documentation is for preview only, and is subject to change in later releases. Now this was not alarming but my next thought was if this DMV is not there where can I find the information which this DMV was providing. Well, while I was thinking about this, I noticed that my another friend Balmukund Lakhani was online on personal messenger. Well, Balmukund is “Know All” kid. I have yet to find situation where I have not got my answers from him. I immediately pinged him and asked the question regarding where can I find information of ‘column_store_index_stats’. His answer was very abrupt but enlightening for sure. Here is our conversation: Pinal: Where can I find information of column_store_index_stats? Balmukund: Assume you have never worked with CTP before and now try to find the information which you are trying to find. Honestly  it was fantastic response from him. I was confused as I have played extensively with CTP versions of SQL Server 2012. Now his response give me big hint. I should have not looked for DMV but rather should have focused on what I wanted to do. I wanted to retrieve the statistics related to the index. In SQL Server 2008/R2, I was able to retrieve the statistics of the index from the DMV - sys.dm_db_index_usage_stats. I used the same DMV on SQL Server 2012 and it did retrieved the necessary information for me. Here is the updated script which gave me all the necessary information I was looking for. Matter of the fact, if I have used my earlier SQL Server 2008 R2 script this would have just worked fine. SELECT DB_NAME(Database_ID) DBName, SCHEMA_NAME(schema_id) AS SchemaName, OBJECT_NAME(ius.OBJECT_ID) ObjName, i.type_desc, i.name, user_seeks, user_scans, user_lookups, user_updates,* FROM sys.dm_db_index_usage_stats ius INNER JOIN sys.indexes i ON i.index_id = ius.index_id AND ius.OBJECT_ID = i.OBJECT_ID INNER JOIN sys.tables t ON t.OBJECT_ID = i.OBJECT_ID GO Let us see the resultset of above query. You will notice that column Type_desc describes the type of the index. You can additionally write WHERE condition on the column and only retrieve only selected type of Index. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Index, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• The Windows 8 and Ubuntu 12.04 Dual Boot NIghtmare

  - by Steve

  I have done some research as to how to go about this dual-boot, and I am close, but I need some guidance with booting into Windows 8 (Ubuntu is installed). I have a Lenovo Ideapad y510p. I will go over what I have done to dual-boot this laptop, with windows 8 pre-installed, with Ubuntu 12.04: I followed every instruction to the letter for the 97-vote response here, and everything worked fine up until after the repair boot section: Installing on a Pre-Installed Windows 8 System (UEFI Supported) I ran into the following error upon restarting after the repair boot section: error: invalid arch independent elf magic. This error (a grub issue) disabled me from booting into Ubuntu :( After a little googling, I followed the instructions in the reactivating grub 2 section to resolve the error: http://kb.acronis.com/content/1686 I found a possible solution to fixing the Windows 8 boot issue, and tried it: http://webcache.googleusercontent.com/search?q=cache:i9JMyXzzRpYJ:askubuntu.com/questions/279275/dual-boot-problem-windows-8-ubuntu-12-04+&cd=1&hl=en&ct=clnk&gl=us&client=ubuntu I thought the above solution worked, but when I attempt to boot into Windows 8, I get the following missing file error: File: \Boot\BCD Status: 0xc000000e Info: The Boot Configuration Data for your PC is missing or contains errors. Here is some other information that may be useful: I have 3 partitions devoted to Ubuntu. The first, sda8, has a flag bios_grub (1049 kb). The second, sda9, is where everything else is (96.6 GB). The last, sda10, is for swap (8299 MB). My question is: How do I fix the boot configuration for Windows 8? Any help would be greatly appreciated :) Update 1: When I attempt to boot into UEFI mode, I get the following error: invalid arch independent elf magic (the same error I saw in step 2). Update 2: A useful link here I found: Dual booting Ubuntu 12.04: UEFI and Legacy So, this is my 4th time installing Ubuntu on the laptop, and it looks like I need to install it in UEFI mode. Should I scrap it all again, and reinstall? Or is there ANY way of salvaging my installation? At this point, I can't even boot into Windows (although I have an installation cd to fix the windows boot issue, that would ultimately screw over ubuntu). Update 3: After doing a little more browsing around, I found a cool way around this messy grub stuff, using rEFInd. Rod Smith's post here saved me! Installing ubuntu 12.04.02 in uefi mode Now, I am able to dual-boot Windows 8 and Ubuntu and boot into both operating systems :) I have another issue (relating to the boot configuration in the bios) that I will post as a separate question :)

  Read the article

• I need help installing Ubuntu 11.10 to multi-drive system

  - by CookyMonzta

  I have a machine with 3 hard drives; the primary, which is 750GB (drive 0), and 2 others, each of which is 640GB (drives 1 and 2). On the last screen before the actual installation begins, this is how my hard drive configuration looks: /dev/sda [DISK0, 750GB] /dev/sda1 ntfs 104MB [Win7 System Reserved] /dev/sda2 ntfs 499,997MB [Windows 7 Pro] free space 250,052MB [This space intended for Windows 8] /dev/sdb [DISK1, 640GB] /dev/sdb1 ntfs 400,085MB [Windows XP Pro] free space 240,049MB [This space intended for Ubuntu] /dev/sdc [DISK2, 640GB] [This drive intended for various backups] free space 160,033MB /dev/sdc5 ntfs 480,101MB [Acronis Secure Zone] As you can see, I have 3 drives, all SATA. I have Win7 on my first drive (0), WinXP on my second drive (1) and a secure zone for daily backups on my third drive (2). I want to put Ubuntu 11.10 Oneiric Ocelot on the drive that also has XP. I've already used 400GB for XP and I have 240GB remaining, for which, my intention was to create a 4GB swap file and use the rest for Ubuntu itself. This is what my second hard drive looked like, for my intended setup before installation: /dev/sdb /dev/sdb5 swap 4,095MB [Linux swap] /dev/sdb6 ext4 235,951MB [Ubuntu 11.10] Needless to say, this is only the second time I have attempted to install Linux. I managed to get 7.10 Gutsy Gibbon working on an old machine. I have two problems with this installation: Ubuntu asks for a location to install the boot loader (i.e., "Device for Boot Loader Installation"). I already have a boot loader; namely, Acronis OS Selector (from Acronis Disk Director 11). So I decided to put the Ubuntu boot loader in /dev/sdb6 (where I intend to install Ubuntu), to keep it from interfering with my Acronis OS Selector. Once I hit "Install now", I ended up with the following error: "No root file system is defined. Please correct this from the partitioning menu." What am I missing? Did I attempt to put the boot loader in the wrong place? I assume I did, because as I am writing this entry, I am looking at LinuxIdentity.com's Ubuntu 11.04 Natty Narwhal magazine, and I see a screenshot (Figure 7 on Page 13) that implies that the boot loader can be installed anywhere, including the first hard drive (in the MBR, which would obviously force me to reinstall the Acronis OS Selector) or even on a floppy. But why do I get an undefined root file system error? I thought /dev/sdb6 was the root file. Obviously I'm missing something in the installation procedure. Should I try installing it in Windows using the WUBI Installer? I assume that, if I attempt to install Ubuntu from WinXP (on the second drive), it will automatically install Ubuntu on the empty partition alongside XP. But will I have the option of creating a swap partition? And what if the WUBI Installer searches all of my drives and decides to install Ubuntu on my first drive's empty partition (which I have left empty for Win8 upon its release)?

  Read the article

• Ubuntu Apache 10 second timeout

  - by Andreas Jansson

  Hi, I'm debugging an API I'm building using netcat to send raw HTTP requests. The thing is that Apache closes the connection after 10 seconds, giving me very little time to type. I know that I could pipe a file to nc, or use any other workaround, but I'd like it to work as it's supposed to. The Timeout directive in apache2.conf is at its default of 300 seconds, KeetAliveTimeout at 15 seconds. Where could this 10 second timeout possibly be defined? I'm running Ubuntu 10.04 Desktop. Thanks, Andreas

  Read the article

• Wireless networking on Gnome on Ubuntu 9 / 10

  - by WaveyDavey

  So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

  Read the article

• Can’t start MySQL on Ubuntu 12.04 after restored from innobackupex

  - by RAH

  I can’t start MySQL on Ubuntu 12.04 after restored backup from innobackupex. Before I tried to restore the db from backup I moved the datadir and got the same problem. With help from google I fixed the problem and got MySQL started. Ready to set up my new slave, I restored the backup via innobackupex –-copy-path /db/mysql, and now I can’t start MySQL. I am sure of the following: In my.cnf the datadir = /db/mysql The new datadir is chown mysql:mysql. The /etc/apparmor.d/usr.sbin.mysqld contains: #/var/lib/mysql/ r, #/var/lib/mysql/** rwk, /db/mysql r, /db/mysql** rwk, AND /var/run/mysqld/mysqld.pid w, /var/run/mysqld/mysqld.sock w, /run/mysqld/mysqld.pid w, /run/mysqld/mysqld.sock w, /var/log/syslog gives me the following info: http://pastebin.com/1TQGsaBH What am I missing? Thanks.

  Read the article

• Windows Ce 6.0 loses Windows credentials when viewing a web site that's running on Windows 2008 server

  - by gnomixa

  When a user views a web page (with integrated Windows authentication) on WindowsCE 6.0 device, the authentication is lost sporadically. The page being viewed is running on Windows 2008 server. We never had the same issue with Windows 2003 server. The credentials were being asked once and cached for a certain time. My question is: has anything changed in Windows 2008 that doesn't pass the credentials the same way to WindowsCE? The only variable in this scenario is the web server OS - Windows 2003 vs WIndows 2008. Any help would be appreciated, thanks!

  Read the article

• Running out of LowMem with Ubuntu PAE Kernel and 32GB of RAM

  - by magneticMonster

  I'm running a Java data import process on a 32-bit Ubuntu 10 PAE kernel machine. After running the process for a while, the oom-killer zaps my Java process. After some Googling and digging through docs, it looks like the system is running out of LowMem. I started the process for the third time and am watching free -lm show me Low: 464 386 77 with the free value (77MB) slowly decreasing. Why am I running out of lowmem and how do I increase it? Some details: $ cat /proc/sys/vm/lowmem_reserve_ratio 256 256 32 $ free -lm total used free shared buffers cached Mem: 32086 24611 7475 0 0 24012 Low: 464 407 57 High: 31621 24204 7417 -/+ buffers/cache: 598 31487 Swap: 2047 0 2047

  Read the article

• OpenVPN won't start on ubuntu - PID not found

  - by you8301083

  I am running ubuntu version 12.04 LTS and I have installed OpenVPN on it. After a while of troubleshooting why my client won't connect (I have generated keys and confligured the client), I ran 'service openvpn status' from the command line and received the following error: could not access PID file for VPN 'server' I have rebooted, started and restarted the service, but each time I check the status, I receive the PID error. I'm pretty sure that I can't connect because the service isn't running. Where can I begin troubleshooting this? I don't know what to look for. Any help is greatly appreciated. Thanks!

  Read the article

• Ubuntu 9.10 Samba NT_STATUS_CONNECTION_REFUSED errors on remote machines.

  - by user40730

  SAMBA I'm running Samba on Ubuntu 9.10 on a MacBook Pro using Parallels. When I run the smbtree command, I get the following errors: peterv@MBP17U<2005$: sudo smbtree Enter root's password: session request to 192.168.1.156 failed (Called name not present) HADEN \SERVER2 cli_start_connection: failed to connect to SERVER2<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED \MBP17WIN MBP17win cli_start_connection: failed to connect to MBP17WIN<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED \MBP17U \MBP17U\IPC$ IPC Service () \MBP17U\Perl \MBP17U\Home \MBP17U\print$ \MBP17 MBP17 cli_start_connection: failed to connect to MBP17<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED Fri Apr 16 05:24:47 EDT 2010 The MBP17 failure is an OS X system, the SERVER2 failure is a Windows XP system. Running testparm shows no errors. Can someone please help me out?

  Read the article

• setting ulimit and ubuntu 8.04

  - by Wizzard

  Hi there, We have two ubuntu 8.04 servers. With the database server I set the table_cache to 1000 however when I restart mysql the status only shows 257 and the open files limit says 1024 I adjusted ulimit by doing ulimit -n 8192 and then restarting mysql; this seemed to do the tick however after a few hours I did ulimit -n and saw it had returned back to 1024 Bit of a worry. I edited the /etc/security/limits.conf and added mysql soft nofile 8192 mysql hard nofile 8192 then rebooted, no change. I then edited and change mysql to * rebooted, no change I then edited and changed it to one line * - nofile 8192 and rebooted, no change. cat /proc/sys/fs/file-max gives me 768730 sysctl fs.file-max gives me fs.file-max = 768730 I am at a bit of a loss to how I can set and keep the ulimit value set so I can increase the table cache properly on mysql.

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >