Search Results

Search found 5564 results on 223 pages for 'multi gpu'.

Page 133/223 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• Does the Intel DX79TO motherboard support x8 devices (SAS HBAs) on PCIe x16 slots?

  - by Zac B

  Context: I have an Intel DX79TO motherboard and a Sun SAS3081E-S/LSI 1060E-S HBA card with a PCIe x8 interface. I plug the HBA into my mobo next to my graphics card, and the HBA power lights illuminate, but the BIOS and OSes (tried Linux, ESXi, Win7) don't see the HBA at all. Question: Does the DX79TO motherboard support non-x16/non-GPU devices in its PCIe x16 slots? According to this question, some consumer motherboards don't support this, but I can't figure out whether or not this motherboard/family does. The answer will affect whether I buy a new motherboard or RMA the SAS card, with money attached to each course, so I figured I'd ask here first. What I've Tried: I've read the spec/manuals for the motherboard and the HBA, and I didn't see anything regarding whether or not the x16 slots were back-compatible to lower lane widths/non graphics-card devices, or whether or not the card could run in wider slots than x8. I've tried contacting Intel, but that was over a month ago and I haven't yet heard anything back except an automated "we got your email!" message.

  Read the article

• Can I minimize VMWare Workstation from exclusive mode?

  - by Blorgbeard

  I am running a VM on two monitors, in fullscreen exclusive mode. I would like to be able to minimize the VM and mess around in the Host, then go back to the VM. I can do this by pressing CTRL+ALT to get out of fullscreen mode, but this puts the VM back onto a single monitor, which moves all my VM's windows back to the main virtual screen. This is annoying, because when I come back to the VM, I have to go back to multiple monitor mode, and move windows back to where they should be. Is there a way to temporarily escape from fullscreen exclusive mode, without disturbing multi-monitor layout? I should note that I'm only using exclusive mode to get rid of the popup toolbar that otherwise appears when your mouse gets too close to the top of the screen. If there's another way to kill that, please let me know. My host and guest are both Windows 7 x64, and I'm running VMWare Workstation 8.

  Read the article

• Dual-screen Multimedia Control Suite for Linux (like Screen Monkey)

  - by samjetski

  I'm looking for some linux software to manage and control a dual monitor/multi screen setup for use in professional-like presentations (ie: monitor1=control, monitor2=projector/audience). I have the dual-monitor configured with my gnome desktop running over both monitors (that's the easy part). What I'm looking for is a neat/seamless way to switch between, say, OpenOffice Impress, DVD Player, VLC live video, Lyricue, other software on monitor2. To have monitor2 shown to the audience and run neat presentations of DVDs, Slideshows, etc. whilst controlling it from monitor1. I can run slideshows, play a DVD on monitor2 (drag & drop VLC on monitor2, and go fullscreen) etc. but this is rather messy in a presentation environment. I found this software: Screen Monkey. Looks like an excellent windows equivalent for what I want to do. Is there anything similar for linux? For Gnome, KDE, anything else X based? Thanks, SamJ

  Read the article

• How to Configure Windows Machine to Allow File Sharing with DNS Alias

  - by Michael Ferrante

  I have not seen a single article posted anywhere online that brings together all the settings one would need to do to make this work properly on Windows, so I thought I would post it here. To facilitate failover schemes, a common technique is to use DNS CNAME records (DNS Aliases) for different machine roles. Then instead of changing the Windows computername of the actual machine name, one can switch a DNS record to point to a new host. This can work on Microsoft Windows machines, but to make it work with file sharing the following configuration steps need to be taken. Outline The Problem The Solution Allowing other machines to use filesharing via the DNS Alias (DisableStrictNameChecking) Allowing server machine to use filesharing with itself via the DNS Alias (BackConnectionHostNames) Providing browse capabilities for multiple NetBIOS names (OptionalNames) Register the Kerberos service principal names (SPNs) for other Windows functions like Printing (setspn) References 1. The Problem On Windows machines, file sharing can work via the computer name, with or without full qualification, or by the IP Address. By default, however, filesharing will not work with arbitrary DNS aliases. To enable filesharing and other Windows services to work with DNS aliases, you must make registry changes as detailed below and reboot the machine. 2. The Solution Allowing other machines to use filesharing via the DNS Alias (DisableStrictNameChecking) This change alone will allow other machines on the network to connect to the machine using any arbitrary hostname. (However this change will not allow a machine to connect to itself via a hostname, see BackConnectionHostNames below). Edit the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters and add a value DisableStrictNameChecking of type DWORD set to 1. Allowing server machine to use filesharing with itself via the DNS Alias (BackConnectionHostNames) This change is necessary for a DNS alias to work with filesharing from a machine to find itself. This creates the Local Security Authority host names that can be referenced in an NTLM authentication request. To do this, follow these steps for all the nodes on the client computer: To the registry subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0, add new Multi-String Value BackConnectionHostNames In the Value data box, type the CNAME or the DNS alias, that is used for the local shares on the computer, and then click OK. Note: Type each host name on a separate line. Providing browse capabilities for multiple NetBIOS names (OptionalNames) Allows ability to see the network alias in the network browse list. Edit the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters and add a value OptionalNames of type Multi-String Add in a newline delimited list of names that should be registered under the NetBIOS browse entries Names should match NetBIOS conventions (i.e. not FQDN, just hostname) Register the Kerberos service principal names (SPNs) for other Windows functions like Printing (setspn) NOTE: Should not need to do this for basic functions to work, documented here for completeness. We had one situation in which the DNS alias was not working because there was an old SPN record interfering, so if other steps aren't working check if there are any stray SPN records. You must register the Kerberos service principal names (SPNs), the host name, and the fully-qualified domain name (FQDN) for all the new DNS alias (CNAME) records. If you do not do this, a Kerberos ticket request for a DNS alias (CNAME) record may fail and return the error code KDC_ERR_S_SPRINCIPAL_UNKNOWN. To view the Kerberos SPNs for the new DNS alias records, use the Setspn command-line tool (setspn.exe). The Setspn tool is included in Windows Server 2003 Support Tools. You can install Windows Server 2003 Support Tools from the Support\Tools folder of the Windows Server 2003 startup disk. How to use the tool to list all records for a computername: setspn -L computername To register the SPN for the DNS alias (CNAME) records, use the Setspn tool with the following syntax: setspn -A host/your_ALIAS_name computername setspn -A host/your_ALIAS_name.company.com computername 3. References All the Microsoft references work via: http://support.microsoft.com/kb/ Connecting to SMB share on a Windows 2000-based computer or a Windows Server 2003-based computer may not work with an alias name Covers the basics of making file sharing work properly with DNS alias records from other computers to the server computer. KB281308 Error message when you try to access a server locally by using its FQDN or its CNAME alias after you install Windows Server 2003 Service Pack 1: "Access denied" or "No network provider accepted the given network path" Covers how to make the DNS alias work with file sharing from the file server itself. KB926642 How to consolidate print servers by using DNS alias (CNAME) records in Windows Server 2003 and in Windows 2000 Server Covers more complex scenarios in which records in Active Directory may need to be updated for certain services to work properly and for browsing for such services to work properly, how to register the Kerberos service principal names (SPNs). KB870911 Distributed File System update to support consolidation roots in Windows Server 2003 Covers even more complex scenarios with DFS (discusses OptionalNames). KB829885

  Read the article

• Networking Logs for MAC Addresses

  - by NetworkGuy

  I wanted to ask a multi-part question. Does Comcast Cable Internet services record MAC Addresses of the Router behind the cable modem. I know they record it for the modem itself. But is there a way for the Modem/Comcast to relay and keep logs of the MAC ID of the Router itself? Then does a windows operating system Log the MAC ID of the Router when its connected to it? If so where do I locate and purge this? Please let me know all areas where it is Logged within the operating system. Thank you!

  Read the article

• Is there a good dual monitor arm solution for iMac 27" i7s?

  - by Darren Newton

  I currently have an iMac 27" and am considering purchasing another to run in target display mode. My desk space is a little limited. Is there a dual monitor arm solution that can support the weight of two iMac 27" units (30.5 pounds (13.8 kg)) as well as their width (25.6 inches (65.0 cm)) in a side-by-side landscape configuration? I looked at the Ergotron LX Dual Side by Side but the iMacs appear to exceed the width and weight limit this device is rated for. I'm open to alternate solutions to arms, such as a multi-unit desk stand/mount, but a wall mount is not possible for me at this time. Thanks!

  Read the article

• How to copy lots of files between two computers, without network?

  - by Steve Bennett

  I want to copy around 50Gb of files from my desktop to my work laptop. For some reason, the laptop won't connect to my home network. I haven't had any luck with a direct ethernet connection either, and I'm not willing to change any of the laptop's network configuration (last time I did that, I couldn't get onto the network at work, making me Not Very Popular). So...what else is there? The obvious route is copying via SD card. My largest card is 8Gb. But I can't find a good workflow. Is there a tool designed for this, where I could just repetitively move the card back and forth, without having to select files? I've tried using teracopy, but you end up missing a few files. I guess I could zip everything up into multi-volume .rars or something...but is there a more elegant way?

  Read the article

• Suggestions for a nice&small - high battery life programmer notebook

  - by Emir

  Hi guys, I'm planning to buy a new notebook since the Toshiba I have now sucks in battery life. I'm a web designer & programmer, and the main features of the notebook should be: High battery life Small, 13.3" or 14" screen A fast processor and RAM that won't let me down while multi-tasking Anything other than these is secondary, I wouldn't like it to be very pricey though :) I'm now leaning towards Macbook Pro 13.3", 2.66 Ghz; it has 10 hours of battery life. However, I mostly develop on Windows, so I don't know how many hours of battery will I get if I run Windows 7 on Bootcamp. Your ideas and suggestions will be much appreciated.

  Read the article

• Intel Core i7 QuadCore on HP Pavilion dv7 Overheating Issues

  - by kellax

  I bought a brand new HP notebook: HP Pavilion dv7-6b21em BeatsAudio edition. The notebook is about 2 months old and has pretty nasty overheating problem. I mainly use it for development however i do play some games. The disturbing thing is that the computer is loud on pretty simple tasks. Here are the specs: CPU: Intel Core i7-2670QM QuadCore ( 8 threads ) @ 2.20 GHz RAM: ( 8GB ) 2x 4GB @ 1066 HDD: 1TB 7200 GPU: ATI Radeon HD 6770M 1GB Dedicated DDR OS: Windows 7 64bit Enterprise I have an external monitor runing on VGA port an 22' Samsung SyncMaster S24B300 CPU Heat Statistics Platform: rPGA 988B (Socket G2) Frequency: cca. 3000 Mhz VID: 1.1809 - 1.2059 v Revision: D2 CPUID: 0x206A7 TDP: 45.0 Wats, Lithographu: 32 nm Heat: Tj. Max: 100*C, Power 4.5 - 5.9 Wats Core #0: 63*C Load on all is about 0 to 2% Core #1: 65*C Core #2: 66*C Core #3: 67*C I opened the notebook the fan is working fine there is no dust but still right now the fan is pretty loud even tho all i have open is FireFox. When i run a game the heat jumps to whopping 90-97*C. It has not shut down due to overheating yet but the loud fan is pretty annoying considering I'm not really doing anything stressfull. Is there anything i can do to fix this is it maybe a BIOS issue ? I have all drivers updated tho to the latest. I have very few background processes running consuming bare 2GB of RAM and about 2% of CPU. I had it serviced they said there is nothing wrong with it. But i feel that a Notebook that costs 1.2k Euros cant be like this.

  Read the article

• How does firefox chose which plugin to use?

  - by Brian Postow

  I have written a plugin which allows the user to view multi-page TIFF images within firefox. The problem is that Quicktime also thinks it can view TIFF images. How does Firefox chose which one gets used? through trial and error I've determined that: Sometimes, my plugin (Accel VIewTIFF) just runs, and everyone is happy. Sometimes I need to disable Quicktime in the Add-ons window. Sometimes I need to remove the QuickTime plugin files from the / Library/Internet Plug-ins folder (I'm on a mac) Sometimes I can put QuickTime BACK after having successfully run Accel ViewTIFF. I've yet to figure out when (if ever) each step is necessary. Please help me escape the cargo cult! (or at least point me to the right place in a manual.) thanks.

  Read the article

• OpenVPN on ec2 bridged mode connects but no Ping, DNS or forwarding

  - by michael

  I am trying to use OpenVPN to access the internet over a secure connection. I have openVPN configured and running on Amazon EC2 in bridge mode with client certs. I can successfully connect from the client, but I cannot get access to the internet or ping anything from the client I checked the following and everything seems to shows a successful connection between the vpn client/server and UDP traffic on 1194 [server] sudo tcpdump -i eth0 udp port 1194 (shows UDP traffic after establishing connection) [server] sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] sudo iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- ip-W-X-Y-0.us-west-1.compute.internal/24 anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] openvpn.log Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 [localhost] Inactivity timeout (--ping-restart), restarting Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 SIGUSR1[soft,ping-restart] received, client-instance restarting Wed Oct 19 03:41:31 2011 MULTI: multi_create_instance called Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Re-using SSL/TLS context Wed Oct 19 03:41:31 2011 a.b.c.d:57889 LZO compression initialized Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Local Options hash (VER=V4): '360696c5' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Expected Remote Options hash (VER=V4): '13a273ba' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 TLS: Initial packet from [AF_INET]a.b.c.d:57889, sid=dd886604 ab6ebb38 Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=EXAMPLE_CA/[email protected] Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=localhost/[email protected] Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Oct 19 03:41:37 2011 a.b.c.d:57889 [localhost] Peer Connection Initiated with [AF_INET]a.b.c.d:57889 Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 PUSH: Received control message: 'PUSH_REQUEST' Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 SENT CONTROL [localhost]: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route-gateway W.X.Y.Z,ping 10,ping-restart 120,ifconfig W.X.Y.Z 255.255.255.0' (status=1) Wed Oct 19 03:41:40 2011 localhost/a.b.c.d:57889 MULTI: Learn: (IPV6) -> localhost/a.b.c.d:57889 [client] tracert google.com Tracing route to google.com [74.125.71.104] over a maximum of 30 hops: 1 347 ms 349 ms 348 ms PC [w.X.Y.Z] 2 * * * Request timed out. I can also successfully ping the server IP address from the client, and ping google.com from an SSH shell on the server. What am I doing wrong? Here is my config (Note: W.X.Y.Z == amazon EC2 private ipaddress) bridge config on br0 ifconfig eth0 0.0.0.0 promisc up brctl addbr br0 brctl addif br0 eth0 ifconfig br0 W.X.Y.X netmask 255.255.255.0 broadcast W.X.Y.255 up route add default gw W.X.Y.1 br0 /etc/openvpn/server.conf (from https://help.ubuntu.com/10.04/serverguide/C/openvpn.html) local W.X.Y.Z dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;server W.X.Y.0 255.255.255.0 server-bridge W.X.Y.Z 255.255.255.0 W.X.Y.105 W.X.Y.200 ;push "route W.X.Y.0 255.255.255.0" push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" tls-auth ta.key 0 # This file is secret user nobody group nogroup log-append openvpn.log iptables config sudo iptables -A INPUT -i tap0 -j ACCEPT sudo iptables -A INPUT -i br0 -j ACCEPT sudo iptables -A FORWARD -i br0 -j ACCEPT sudo iptables -t nat -A POSTROUTING -s W.X.Y.0/24 -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Routing Tables added route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface W.X.Y.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 W.X.Y.1 0.0.0.0 UG 0 0 0 br0 C:>route print =========================================================================== Interface List 32...00 ff ac d6 f7 04 ......TAP-Win32 Adapter V9 15...00 14 d1 e9 57 49 ......Microsoft Virtual WiFi Miniport Adapter #2 14...00 14 d1 e9 57 49 ......Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Net work Adapter 10...00 1f d0 50 1b ca ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 36...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.2.1 10.1.2.201 25 10.1.2.0 255.255.255.0 On-link 10.1.2.201 281 10.1.2.201 255.255.255.255 On-link 10.1.2.201 281 10.1.2.255 255.255.255.255 On-link 10.1.2.201 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.2.201 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.2.201 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.1.2.1 Default =========================================================================== C:>tracert google.com Tracing route to google.com [74.125.71.147] over a maximum of 30 hops: 1 344 ms 345 ms 343 ms PC [W.X.Y.221] 2 * * * Request timed out.

  Read the article

• ECC RAM in GA-G33M-DS2R? Or any Gigabyte/G33M motherboard?

  - by Gregory Hoerner

  I'm looking to retire a server which has 12GB of ECC DDR2 RAM. I'd like to upgrade my multi-purpose machine (firewall, file server, VM host for Windows Home Server, etc.) using the RAM from the server. I was just wondering: Has anyone had experience using ECC RAM in a GA-G33M-DS2R motherboard (or any Gigabyte GA-G33M-XXXX motherboard for that matter)? Has anyone had experience using ECC RAM in a motherboard with a G33M chipset. I've searched everywhere and found the attitude positive of ECC memory working in a Non-ECC board, but I would like some specific positive feedback before proceeding tonight. I have to kick the entire house offline, which I don't like to do without good reason :)

  Read the article

• Why would cat6 connectors not work with cat5e patch cable?

  - by Lee Tickett

  I had a naff batch of cat5 connectors (the latching mechanism didn't work) so decided to order in some cat6 connectors in preparation for the inevitable upgrade. My existing reel of for making patch cables is cat5e utp stranded. I made up a few cables and tested them- none of them worked. I recrimped and still nothing. When i check them with a multi-meter not all pins are connected. This reel has always worked with the previous cat5 connectors so I tested the cat6 connectors on a reel of solid cat5e cable and they work fine. Any ideas what I might be doing wrong? Or what might be at fault? (cable/connectors) and how I can diagnose? Thanks Lee

  Read the article

• ADSIEdit freezes gettings properties of a group with hundred of thousands members

  - by ixe013

  Doing performance testing on an AD-LDS (Server 2008 R2 64 bits), we created a milion user in a single OU. We also created a single group object and made those milion users member of that group. When we try to list the milion of users ADSIEdit times out with an error message saying it cannot display that many users. Fine. But if we open the properties for the group, ADSIEdit freezes, eating up all available memory and CPU trashing (nearly 60M page faults in under an hour). AD-LDS (running on another computer) is barely hitting the 1% CPU mark, servicing other ldap requests as if nothing were. We can throw more memory at the problem, but more users will have to be managed one day and we will be back at square one. Is there a way to set a limit in ADSIEdit so that it will not hang the computer when retreving a very large multi-value object ?

  Read the article

• httpd not starting with systemd on F17

  - by malfy

  Title says it all. This is a fresh Fedora 17 system running on a Xen hypervisor. No idea why it won't start [root@box~]  uname -a Linux box.localhost 3.5.4-2.fc17.i686.PAE #1 SMP Wed Sep 26 22:10:23 UTC 2012 i686 i686 i386 GNU/Linux [root@box~]  cat /etc/redhat-release Fedora release 17 (Beefy Miracle) [root@box~]  systemctl enable httpd.service ln -s '/usr/lib/systemd/system/httpd.service' '/etc/systemd/system/multi-user.target.wants/httpd.service' [root@box~]  systemctl start httpd.service Job failed. See system journal and 'systemctl status' for details. [root@box~]  systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled) Active: failed (Result: exit-code) since Fri, 19 Oct 2012 22:43:37 -0500; 3s ago Process: 18225 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=226/NAMESPACE) CGroup: name=systemd:/system/httpd.service Oct 19 22:43:37 box.localhost systemd[18225]: Failed at step NAMESPACE spawning /usr/sbin/httpd: No such file or directory [root@box~]  ls -al /usr/sbin/httpd -rwxr-xr-x 1 root root 343496 Apr 30 04:56 /usr/sbin/httpd

  Read the article

• Xen dom0 reports incorrect amount of RAM with dom0_mem set

  - by xen_amnesiac

  I've done a fair bit of searching about this, but have found nothing that answers my question. I have a system with 6GB of RAM which acts as a Xen server. For reference, it runs Ubuntu 12.04. I've set the kernel parameter dom0_mem:512M,max:512M in /etc/default/grub as follows: GRUB_CMDLINE_XEN_DEFAULT="dom0_mem=min:512M,max:512M" I've tried variations of that, with the same result. My question is this: With the above set, the dom0 reports in all applications a RAM amount of 422M. cat /proc/meminfo gives the following: $ cat /proc/meminfo MemTotal: 432472 kB MemFree: 54144 kB Buffers: 17640 kB Cached: 220104 kB SwapCached: 30172 kB Active: 136500 kB Inactive: 167780 kB Active(anon): 6156 kB Inactive(anon): 60516 kB Active(file): 130344 kB Inactive(file): 107264 kB Unevictable: 52 kB Mlocked: 52 kB SwapTotal: 1794044 kB SwapFree: 1682012 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 39572 kB Mapped: 8048 kB Shmem: 136 kB Slab: 44324 kB SReclaimable: 22012 kB SUnreclaim: 22312 kB KernelStack: 1280 kB PageTables: 3840 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2010280 kB Committed_AS: 329192 kB VmallocTotal: 34359738367 kB VmallocUsed: 313988 kB VmallocChunk: 34359417340 kB HardwareCorrupted: 0 kB AnonHugePages: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 524696 kB DirectMap2M: 0 kB top, htop, free -m, and byobu's RAM monitor all report the same amount. At first I thought this was because of the onboard graphics borrowing some memory, but have now switched to a dedicated GPU and it persists. Is this normal behavior, or has something gone amiss? It's just about 100MB of RAM that's "gone", and I have no idea where it went. I understand that it's normal that not all RAM is available for allocation, but does the system really take an amount relatively high to the amount of RAM available?

  Read the article

• Do I need liquid cooling?

  - by Mrrvomun

  I'm building a computer mainly for gaming and developing games. It's going to be a three screen system with two GeForce GTX 460's and a quad-core i7. The newegg wattage calculator says I need around 900W. The case I intend to get is this one. Full specs if you need 'em are at the end of this post. I have no intentions to overclock the system at the moment, but this may change in the future. I've done a lot of research on the subject, and the answers I've found indicate that it takes a heck of a lot of power to require liquid cooling, and most non-overclocked systems don't need it. But I haven't seen a question about a system with two GPU's, so I ask you the following two questions: Assuming that the system is used for gaming for very extended periods of time (say 4-6 hours at a time, nonstop) with all three screens running at full 1080p, would the fans installed in the system suffice? Or would I need more fans and/or liquid cooling? If the system is used under the same circumstances as above, and is overclocked to a reasonable level, would the fans installed in the system suffice? Or would I need more fans and/or liquid cooling? Specs: Intel Core i7 16GB DDR3 Two nVIDIA GeForce GTX 460 3TB HDD Two DVD-RW writers Thermaltake 1050W power supply Case is linked above

  Read the article

• ASUS P8B WS - Endless Reboots

  - by tuxGurl

  I am running a Intel XEON 1245 with 4GBx2 Kingston Memory ECC Unbuffered DDR3 on an ASUS P8B WS motherboard. BIOS Version 0904 x64. This system is a little over a month old. It is running Ubuntu 11.10. This evening I found the machine turned off. When I tried to restart it, it would POST and stop at the GRUB screen. When I selected Ubuntu and hit enter within 2-3 seconds the would shutdown and restart. If I stayed at the GRUB screen and did nothing the system would not cut out. I tried booting off a USB stick and again 2-3 seconds after selecting 'Try Ubuntu without Installing' the machine will cut power and reboot. Things I have tried so far: Resetting the BIOS using the on board jumper Resetting the BIOS settings to default Disconnecting all external hardware - except keyboard & monitor Booting with 1 stick of RAM - I tried different single sticks Ensured that onboard EPU and GPU boost switches are in the off position. I am running a Memtest86 right now and it has been running for 38+ minutes. This is not an OS problem or an overheating issue (I have a CoolerMaster HAF Case with 3 fans besides the CPU fan) I am at a loss as to what to try next. I think the BIOS is mis-configured somehow but I don't know what to look for.

  Read the article

• Delay between printing via lp in opensuse

  - by adamweeks

  I am experiencing a 10-15 second delay when printing multiple documents to a barcode printer in opensuse. I have had the same setup on other systems with older versions of opensuse without any issue. The setup is as follows: The print queue is setup as a "generic with driver Raw Queue". The files being sent down to the printers are simple text files with the lp command: lp -dprinter1 /path/file The printer is a JetDirect compatible device (Intermec brand) with a standard 9100 port socket setup. If I send a multi-page document to the printer, it will print nonstop the multiple pages. If I send 2 or more text files down via separate "lp" commands, the delay will be there between each printout. I've tried multiple different printers and they all experience the same issue.

  Read the article

• systemd initiated uwsgi process shuts down after a while

  - by Calvin Cheng

  So I wrote this simple systemd service script:- [Unit] Description=uwsgi server script [Service] User=web Group=web WorkingDirectory=/var/www/prod/myproject/releases/current ExecStart=/bin/bash -c 'source ~/.bash_profile; workon myproject; uwsgi --ini /var/www/prod/myproject/releases/current/myproject/uwsgi_prod.ini' [Install] WantedBy=multi-user.target which works fine - it starts up and I can see my uwsgi processes in htop. However, it inexplicably shuts down after being idle for 5 minutes. If I start this process manually in bash console by executing, as web user:- source ~/.bash_profile workon myproject uwsgi --ini /var/www/prod/myproject/releases/current/myproject/uwsgi_prod.ini my process does not die after being idle. What could the problem be?

  Read the article

• Are HDMI to VGA Adapters Really Device-Specific?

  - by allquixotic

  There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

  Read the article

• Tooltips shadow stuck on desktop

  - by faulty

  I tends to get this problem from time to time. The tooltips with a shadow appearing on top of everything. It's the shadow of the tooltips not disappearing after the tooltips disappear. The last one I had the tooltips was from the wifi connection list at the systray. This problem also happen to me on another computer. Both running Win7 with ATI gpu. I found this similar post Menu command stuck on screen but none of the solution helped. In fact the "Fade or slide tooltips into view" has been unchecked from the beginning. Ending task of "dwm.exe" also doesn't help. So far the only way to resolve this by restarting window. I can't post picture yet, so can't show any screenshot. Edit: Just tested a few more trick which doesn't work. 1. Turn of aero 2. Hibernate 3. Switch main display to external display and switch back. 4. Change resolution

  Read the article

• When gaming computer freezes with a blank screen and a buzzing sound

  - by The Colour Of Heartache

  I have a problem with random freezes when playing games. Sometimes it's fine for hours, other times it dosn't last even one. I tried googling around and I found recomendations to update my graphics drivers and to test for overheating. The graphics drivers haven't helped worked and Furmark created a consistant heat higher than I get during a crash. I even tried running a game using the Linux dual boot and WINE, that crashed too. Here are the tempreture logs leading up to the latest crash. The GPU dosn't hit 80, and I've hit 90 with no crash on firmark. DATE TIME MHz CPU_0 CPU_1 CPU_2 CPU_3 LOAD% GPU 04/05/12 15:21:00 3200.16 63 58 57 56 15.4 77 04/05/12 15:21:05 3200.16 63 59 58 56 15.8 76 04/05/12 15:21:10 3200.16 62 59 58 55 15.1 78 04/05/12 15:21:15 3200.16 63 59 58 56 16.5 77 04/05/12 15:21:20 3200.16 64 58 58 57 15.3 77 04/05/12 15:21:25 3200.16 63 58 59 56 15.8 78 04/05/12 15:21:30 3200.16 63 58 58 57 15.8 77 04/05/12 15:21:35 3200.16 63 58 58 56 17.0 77 04/05/12 15:21:40 3200.16 63 59 59 56 15.9 77 04/05/12 15:21:45 3200.16 63 58 58 58 15.6 77 04/05/12 15:21:50 3200.16 63 58 58 58 15.8 77 04/05/12 15:21:55 3200.16 63 58 59 56 15.9 77 04/05/12 15:22:00 3200.16 63 58 58 57 15.8 77 04/05/12 15:21:05 3200.16 63 58 58 56 15.9 77 04/05/12 15:21:10 3200.16 63 57 58 56 15.3 78 04/05/12 15:21:15 3200.16 64 58 58 56 15.4 78 04/05/12 15:21:20 3200.16 63 58 58 56 15.4 77 04/05/12 15:21:25 3200.16 62 58 58 57 15.6 77 04/05/12 15:21:30 3200.16 62 58 58 57 15.8 77 04/05/12 15:21:35 3200.16 63 59 58 56 15.9 77 04/05/12 15:21:40 3200.16 63 58 58 56 15.9 77 04/05/12 15:21:45 3200.16 63 59 58 56 15.6 77 04/05/12 15:21:50 3200.16 62 59 58 58 15.8 77 04/05/12 15:21:55 3200.16 63 58 58 57 15.9 77 04/05/12 15:22:00 3200.16 63 58 58 56 15.9 77 04/05/12 15:22:05 3200.16 63 58 58 56 16.3 77 04/05/12 15:22:10 3200.16 64 58 59 56 15.7 77 04/05/12 15:22:15 3200.16 63 58 60 57 17.2 77 04/05/12 15:22:20 3200.16 63 58 58 56 15.5 78 04/05/12 15:22:25 3200.16 63 58 60 57 15.9 77 04/05/12 15:22:30 3200.16 63 59 59 57 15.6 76 04/05/12 15:22:35 3200.16 64 59 60 57 17.7 77 04/05/12 15:22:40 3200.16 63 59 58 57 16.0 77 04/05/12 15:22:45 3200.16 64 58 58 57 15.8 77 04/05/12 15:22:50 3200.16 63 59 58 56 15.8 77 04/05/12 15:22:55 3200.16 63 58 59 57 15.8 78 04/05/12 15:23:00 3200.16 63 59 58 57 15.7 77 04/05/12 15:22:05 3200.16 62 58 57 58 15.9 77 04/05/12 15:22:10 3200.16 63 58 59 57 15.9 77 04/05/12 15:22:15 3200.16 63 59 58 56 17.1 77 04/05/12 15:22:20 3200.16 63 58 59 57 16.0 77 04/05/12 15:22:25 3200.16 63 58 58 57 15.9 77 04/05/12 15:22:30 3200.16 63 59 59 57 15.7 77 04/05/12 15:22:35 3200.16 64 59 58 58 21.0 77 04/05/12 15:22:40 3200.16 63 59 58 58 16.0 77 04/05/12 15:22:45 3200.16 64 59 59 57 15.7 77 04/05/12 15:22:50 3200.16 63 59 58 56 15.8 78 04/05/12 15:22:55 3200.16 63 59 58 57 15.8 78 04/05/12 15:23:00 3200.16 63 59 57 57 15.9 77 04/05/12 15:23:05 3200.16 64 58 58 58 15.7 77 04/05/12 15:23:10 3200.16 63 59 58 56 15.9 77 04/05/12 15:23:15 3200.16 64 59 58 57 16.6 77 04/05/12 15:23:20 3200.16 63 59 58 58 16.0 77 04/05/12 15:23:25 3200.16 63 58 58 57 15.7 77 04/05/12 15:23:30 3200.16 63 59 58 56 15.4 78 04/05/12 15:23:35 3200.16 64 60 59 61 17.7 77 04/05/12 15:23:40 3200.16 63 59 58 57 15.6 77 04/05/12 15:23:45 1600.08 53 54 53 52 4.4 76 04/05/12 15:23:50 3200.16 63 59 57 56 15.8 77 04/05/12 15:23:55 3200.16 63 58 57 57 15.6 77 04/05/12 15:24:00 3200.16 63 58 58 58 15.9 77 04/05/12 15:23:05 3200.16 64 59 58 56 15.6 77 04/05/12 15:23:10 3200.16 64 59 58 57 15.9 77 04/05/12 15:23:15 3200.16 63 59 58 59 16.7 77 04/05/12 15:23:20 3200.16 64 58 58 58 16.0 77 04/05/12 15:23:25 3200.16 64 58 58 57 15.7 77 04/05/12 15:23:30 3200.16 64 58 58 57 15.2 78 04/05/12 15:23:35 3200.16 63 59 59 58 17.8 77 04/05/12 15:23:40 3200.16 63 59 59 58 15.8 77 04/05/12 15:23:45 1600.08 53 54 53 52 4.7 76 04/05/12 15:23:50 3200.16 63 59 57 56 16.9 77 04/05/12 15:23:55 3200.16 63 58 59 56 15.7 77 04/05/12 15:24:00 3200.16 63 58 59 57 15.9 77 I also got a dmp file, here's what BlueScreenView gave me. The first three lines were in red, the summery says that the crash was casued by hal.dll and the address hal.dll+12903 Filename Address in Stack From Address To Address Size Time Stamp Time String Product Name File Description File Version Company Full Path hal.dll hal.dll+12903 fffff800`033e0000 fffff800`03429000 0x00049000 0x4a5bdf08 14/07/2009 02:27:36 ntoskrnl.exe ntoskrnl.exe+185923 fffff800`02e05000 fffff800`033e0000 0x005db000 0x4ec7a284 19/11/2011 13:35:16 Microsoft® Windows® Operating System NT Kernel & System 6.1.7600.16917 (win7_gdr.111118-2330) Microsoft Corporation C:\Windows\system32\ntoskrnl.exe pci.sys pci.sys+9aff fffff880`0108f000 fffff880`010c2000 0x00033000 0x4a5bc117 14/07/2009 00:19:51 kdcom.dll fffff800`00bc4000 fffff800`00bce000 0x0000a000 0x4d4d40d9 05/02/2011 13:21:45 mcupdate_GenuineIntel.dll fffff880`00c26000 fffff880`00c6a000 0x00044000 0x4a5bdf66 14/07/2009 02:29:10 PSHED.dll fffff880`00c6a000 fffff880`00c7e000 0x00014000 0x4a5be027 14/07/2009 02:32:23 Microsoft® Windows® Operating System Platform Specific Hardware Error Driver 6.1.7600.16385 (win7_rtm.090713-1255) Microsoft Corporation C:\Windows\system32\PSHED.dll CLFS.SYS fffff880`00c7e000 fffff880`00cdc000 0x0005e000 0x4a5bc11d 14/07/2009 00:19:57 CI.dll fffff880`00cdc000 fffff880`00d9c000 0x000c0000 0x4a5be01d 14/07/2009 02:32:13 Wdf01000.sys fffff880`00e0e000 fffff880`00eb2000 0x000a4000 0x4a5bc19f 14/07/2009 00:22:07 WDFLDR.SYS fffff880`00eb2000 fffff880`00ec1000 0x0000f000 0x4a5bc11a 14/07/2009 00:19:54 sptd.sys fffff880`00ec1000 fffff880`00fe7000 0x00126000 0x4ad24632 11/10/2009 21:55:14 WMILIB.SYS fffff880`00fe7000 fffff880`00ff0000 0x00009000 0x4a5bc117 14/07/2009 00:19:51 SCSIPORT.SYS fffff880`00d9c000 fffff880`00dcb000 0x0002f000 0x4a5bcac0 14/07/2009 01:01:04 ACPI.sys fffff880`01021000 fffff880`01078000 0x00057000 0x4a5bc106 14/07/2009 00:19:34 msisadrv.sys fffff880`01078000 fffff880`01082000 0x0000a000 0x4a5bc0fe 14/07/2009 00:19:26 vdrvroot.sys fffff880`01082000 fffff880`0108f000 0x0000d000 0x4a5bcadb 14/07/2009 01:01:31 partmgr.sys fffff880`010c2000 fffff880`010d7000 0x00015000 0x4a5bc11e 14/07/2009 00:19:58 volmgr.sys fffff880`010d7000 fffff880`010ec000 0x00015000 0x4a5bc11d 14/07/2009 00:19:57 volmgrx.sys fffff880`010ec000 fffff880`01148000 0x0005c000 0x4a5bc141 14/07/2009 00:20:33 pciide.sys fffff880`01148000 fffff880`0114f000 0x00007000 0x4a5bc115 14/07/2009 00:19:49 PCIIDEX.SYS fffff880`0114f000 fffff880`0115f000 0x00010000 0x4a5bc114 14/07/2009 00:19:48 mountmgr.sys fffff880`0115f000 fffff880`01179000 0x0001a000 0x4a5bc11a 14/07/2009 00:19:54 atapi.sys fffff880`01179000 fffff880`01182000 0x00009000 0x4a5bc113 14/07/2009 00:19:47 ataport.SYS fffff880`01182000 fffff880`011ac000 0x0002a000 0x4a5bc118 14/07/2009 00:19:52 msahci.sys fffff880`011ac000 fffff880`011b7000 0x0000b000 0x4a5bcabd 14/07/2009 01:01:01 amdxata.sys fffff880`011b7000 fffff880`011c2000 0x0000b000 0x4ba3a3ca 19/03/2010 17:18:18 fltmgr.sys fffff880`01211000 fffff880`0125d000 0x0004c000 0x4a5bc11f 14/07/2009 00:19:59 fileinfo.sys fffff880`0125d000 fffff880`01271000 0x00014000 0x4a5bc481 14/07/2009 00:34:25 Ntfs.sys fffff880`0145c000 fffff880`015fe000 0x001a2000 0x4d79996d 11/03/2011 04:39:25 msrpc.sys fffff880`01271000 fffff880`012cf000 0x0005e000 0x4a5bc17c 14/07/2009 00:21:32 ksecdd.sys fffff880`01400000 fffff880`0141a000 0x0001a000 0x4ec48579 17/11/2011 04:54:33 cng.sys fffff880`012cf000 fffff880`01342000 0x00073000 0x4ec48cfb 17/11/2011 05:26:35 pcw.sys fffff880`0141a000 fffff880`0142b000 0x00011000 0x4a5bc0ff 14/07/2009 00:19:27 Fs_Rec.sys fffff880`0142b000 fffff880`01435000 0x0000a000 0x4a5bc111 14/07/2009 00:19:45 ndis.sys fffff880`01653000 fffff880`01745000 0x000f2000 0x4a5bc184 14/07/2009 00:21:40 NETIO.SYS fffff880`01745000 fffff880`017a5000 0x00060000 0x4bbe946f 09/04/2010 03:43:59 ksecpkg.sys fffff880`017a5000 fffff880`017d0000 0x0002b000 0x4ec48d32 17/11/2011 05:27:30 tcpip.sys fffff880`01802000 fffff880`01a00000 0x001fe000 0x4e83eb7f 29/09/2011 04:52:31 fwpkclnt.sys fffff880`01600000 fffff880`0164a000 0x0004a000 0x4a5bc164 14/07/2009 00:21:08 vmstorfl.sys fffff880`017d0000 fffff880`017e0000 0x00010000 0x4a5bc67e 14/07/2009 00:42:54 volsnap.sys fffff880`01342000 fffff880`0138e000 0x0004c000 0x4a5bc128 14/07/2009 00:20:08 spldr.sys fffff880`017e0000 fffff880`017e8000 0x00008000 0x4a0858bb 11/05/2009 17:56:27 rdyboost.sys fffff880`0138e000 fffff880`013c8000 0x0003a000 0x4a5bc48a 14/07/2009 00:34:34 mup.sys fffff880`017e8000 fffff880`017fa000 0x00012000 0x4a5bc201 14/07/2009 00:23:45 hwpolicy.sys fffff880`0164a000 fffff880`01653000 0x00009000 0x4a5bc0fa 14/07/2009 00:19:22 fvevol.sys fffff880`011c2000 fffff880`011fc000 0x0003a000 0x4abd7db2 26/09/2009 03:34:26 disk.sys fffff880`01435000 fffff880`0144b000 0x00016000 0x4a5bc11d 14/07/2009 00:19:57 CLASSPNP.SYS fffff880`013c8000 fffff880`013f8000 0x00030000 0x4a5bc11e 14/07/2009 00:19:58 cdrom.sys fffff880`00dcb000 fffff880`00df5000 0x0002a000 0x4a5bc11a 14/07/2009 00:19:54 MpFilter.sys fffff880`02c1a000 fffff880`02c4b000 0x00031000 0x4d9cc801 06/04/2011 21:07:29 Null.SYS fffff880`02c4b000 fffff880`02c54000 0x00009000 0x4a5bc109 14/07/2009 00:19:37 Beep.SYS fffff880`02c54000 fffff880`02c5b000 0x00007000 0x4a5bca8d 14/07/2009 01:00:13 vga.sys fffff880`02c5b000 fffff880`02c69000 0x0000e000 0x4a5bc587 14/07/2009 00:38:47 VIDEOPRT.SYS fffff880`02c69000 fffff880`02c8e000 0x00025000 0x4a5bc58b 14/07/2009 00:38:51 watchdog.sys fffff880`02c8e000 fffff880`02c9e000 0x00010000 0x4a5bc53f 14/07/2009 00:37:35 RDPCDD.sys fffff880`02c9e000 fffff880`02ca7000 0x00009000 0x4a5bce62 14/07/2009 01:16:34 rdpencdd.sys fffff880`02ca7000 fffff880`02cb0000 0x00009000 0x4a5bce62 14/07/2009 01:16:34 rdprefmp.sys fffff880`02cb0000 fffff880`02cb9000 0x00009000 0x4a5bce63 14/07/2009 01:16:35 Msfs.SYS fffff880`02cb9000 fffff880`02cc4000 0x0000b000 0x4a5bc113 14/07/2009 00:19:47 Npfs.SYS fffff880`02cc4000 fffff880`02cd5000 0x00011000 0x4a5bc114 14/07/2009 00:19:48 tdx.sys fffff880`02cd5000 fffff880`02cf3000 0x0001e000 0x4a5bc16b 14/07/2009 00:21:15 TDI.SYS fffff880`02cf3000 fffff880`02d00000 0x0000d000 0x4a5bc16e 14/07/2009 00:21:18 afd.sys fffff880`02d00000 fffff880`02d89000 0x00089000 0x4efa940c 28/12/2011 04:59:08 netbt.sys fffff880`02d89000 fffff880`02dce000 0x00045000 0x4a5bc178 14/07/2009 00:21:28 ws2ifsl.sys fffff880`02dce000 fffff880`02dd9000 0x0000b000 0x4a5bccf9 14/07/2009 01:10:33 wfplwf.sys fffff880`02dd9000 fffff880`02de2000 0x00009000 0x4a5bccb6 14/07/2009 01:09:26 pacer.sys fffff880`00c00000 fffff880`00c26000 0x00026000 0x4a5bccc5 14/07/2009 01:09:41 vpcnfltr.sys fffff880`02de2000 fffff880`02df6000 0x00014000 0x4ab97aae 23/09/2009 02:32:30 netbios.sys fffff880`02c00000 fffff880`02c0f000 0x0000f000 0x4a5bccb6 14/07/2009 01:09:26 serial.sys fffff880`04075000 fffff880`04092000 0x0001d000 0x4a5bcaa8 14/07/2009 01:00:40 wanarp.sys fffff880`04092000 fffff880`040ad000 0x0001b000 0x4a5bcced 14/07/2009 01:10:21 vpcvmm.sys fffff880`040ad000 fffff880`04103180 0x00056180 0x4ab97ab6 23/09/2009 02:32:38 termdd.sys fffff880`04104000 fffff880`04118000 0x00014000 0x4a5bce64 14/07/2009 01:16:36 rdbss.sys fffff880`04118000 fffff880`04169000 0x00051000 0x4a5bc219 14/07/2009 00:24:09 nsiproxy.sys fffff880`04169000 fffff880`04175000 0x0000c000 0x4a5bc15e 14/07/2009 00:21:02 mssmbios.sys fffff880`04175000 fffff880`04180000 0x0000b000 0x4a5bc3be 14/07/2009 00:31:10 discache.sys fffff880`04180000 fffff880`0418f000 0x0000f000 0x4a5bc52e 14/07/2009 00:37:18 csc.sys fffff880`04280000 fffff880`04303000 0x00083000 0x4a5bc22a 14/07/2009 00:24:26 dfsc.sys fffff880`04303000 fffff880`04321000 0x0001e000 0x4db78623 27/04/2011 03:57:39 blbdrive.sys fffff880`04321000 fffff880`04332000 0x00011000 0x4a5bc4df 14/07/2009 00:35:59 tunnel.sys fffff880`04332000 fffff880`04358000 0x00026000 0x4a5bccc1 14/07/2009 01:09:37 intelppm.sys fffff880`04358000 fffff880`0436e000 0x00016000 0x4a5bc0fd 14/07/2009 00:19:25 nvlddmkm.sys fffff880`0fe34000 fffff880`10b52000 0x00d1e000 0x4f4e68c4 29/02/2012 19:04:52 nvBridge.kmd fffff880`10b52000 fffff880`10b53180 0x00001180 0x4d27c482 08/01/2011 02:57:22 dxgkrnl.sys fffff880`04450000 fffff880`04544000 0x000f4000 0x4d3fa1a0 26/01/2011 05:22:56 dxgmms1.sys fffff880`04544000 fffff880`0458a000 0x00046000 0x4d3fa174 26/01/2011 05:22:12 usbuhci.sys fffff880`0458a000 fffff880`04597000 0x0000d000 0x4d8c0a8f 25/03/2011 04:22:55 USBPORT.SYS fffff880`04597000 fffff880`045ed000 0x00056000 0x4d8c0a97 25/03/2011 04:23:03 usbehci.sys fffff880`045ed000 fffff880`045fe000 0x00011000 0x4d8c0a91 25/03/2011 04:22:57 HDAudBus.sys fffff880`04400000 fffff880`04424000 0x00024000 0x4a5bcbf5 14/07/2009 01:06:13 1394ohci.sys fffff880`10b54000 fffff880`10b92000 0x0003e000 0x4a5bcc30 14/07/2009 01:07:12 Rt64win7.sys fffff880`10b92000 fffff880`10bc4000 0x00032000 0x49a65b0d 26/02/2009 10:04:13 i8042prt.sys fffff880`04424000 fffff880`04442000 0x0001e000 0x4a5bc11d 14/07/2009 00:19:57 kbdclass.sys fffff880`10bc4000 fffff880`10bd3000 0x0000f000 0x4a5bc116 14/07/2009 00:19:50 VMkbd.sys fffff880`04442000 fffff880`0444d000 0x0000b000 0x4b5a836f 23/01/2010 06:04:47 serenum.sys fffff880`10bd3000 fffff880`10bdf000 0x0000c000 0x4a5bcaa1 14/07/2009 01:00:33 av1shsvl.SYS fffff880`0436e000 fffff880`043b3000 0x00045000 0x4a5cf4d7 14/07/2009 22:12:55 wmiacpi.sys fffff880`10bdf000 fffff880`10be8000 0x00009000 0x4a5bc3b6 14/07/2009 00:31:02 CompositeBus.sys fffff880`10be8000 fffff880`10bf8000 0x00010000 0x4a5bcaa1 14/07/2009 01:00:33 AgileVpn.sys fffff880`0fe00000 fffff880`0fe16000 0x00016000 0x4a5bccf0 14/07/2009 01:10:24 rasl2tp.sys fffff880`043b3000 fffff880`043d7000 0x00024000 0x4a5bcce3 14/07/2009 01:10:11 ndistapi.sys fffff880`0fe16000 fffff880`0fe22000 0x0000c000 0x4a5bccd8 14/07/2009 01:10:00 ndiswan.sys fffff880`04200000 fffff880`0422f000 0x0002f000 0x4a5bcce3 14/07/2009 01:10:11 raspppoe.sys fffff880`0422f000 fffff880`0424a000 0x0001b000 0x4a5bcce9 14/07/2009 01:10:17 raspptp.sys fffff880`0424a000 fffff880`0426b000 0x00021000 0x4a5bccea 14/07/2009 01:10:18 rassstp.sys fffff880`043d7000 fffff880`043f1000 0x0001a000 0x4a5bccf1 14/07/2009 01:10:25 tapoas.sys fffff880`0fe22000 fffff880`0fe2f000 0x0000d000 0x4c3a627f 12/07/2010 01:31:59 tap0901.sys fffff880`043f1000 fffff880`043fe000 0x0000d000 0x4b22da33 12/12/2009 00:48:03 rdpbus.sys fffff880`0426b000 fffff880`04276000 0x0000b000 0x4a5bceaa 14/07/2009 01:17:46 mouclass.sys fffff880`0418f000 fffff880`0419e000 0x0000f000 0x4a5bc116 14/07/2009 00:19:50 swenum.sys fffff880`0444d000 fffff880`0444e480 0x00001480 0x4a5bca92 14/07/2009 01:00:18 ks.sys fffff880`0419e000 fffff880`041e1000 0x00043000 0x4b8f37d9 04/03/2010 05:32:25 umbus.sys fffff880`041e1000 fffff880`041f3000 0x00012000 0x4a5bcc20 14/07/2009 01:06:56 vpcusb.sys fffff880`04000000 fffff880`0401d000 0x0001d000 0x4ab97ab7 23/09/2009 02:32:39 usbrpm.sys fffff880`0401d000 fffff880`0402c000 0x0000f000 0x4a5bd2c2 14/07/2009 01:35:14 USBD.SYS fffff880`045fe000 fffff880`045fff00 0x00001f00 0x4d8c0a8b 25/03/2011 04:22:51 vmnetadapter.sys fffff880`10bf8000 fffff880`10c00000 0x00008000 0x4a800ce5 10/08/2009 13:04:53 VMNET.SYS fffff880`04276000 fffff880`04280000 0x0000a000 0x4a800ce2 10/08/2009 13:04:50 vpchbus.sys fffff880`0402c000 fffff880`04068000 0x0003c000 0x4ab97ab0 23/09/2009 02:32:32 usbhub.sys fffff880`04c26000 fffff880`04c80000 0x0005a000 0x4d8c0aaa 25/03/2011 04:23:22 NDProxy.SYS fffff880`04c80000 fffff880`04c95000 0x00015000 0x4a5bccdd 14/07/2009 01:10:05 HdAudio.sys fffff880`04c95000 fffff880`04cf1000 0x0005c000 0x4a5bcc23 14/07/2009 01:06:59 portcls.sys fffff880`04cf1000 fffff880`04d2e000 0x0003d000 0x4a5bcc03 14/07/2009 01:06:27 drmk.sys fffff880`04d2e000 fffff880`04d50000 0x00022000 0x4a5bd8e5 14/07/2009 02:01:25 ksthunk.sys fffff880`04d50000 fffff880`04d55200 0x00005200 0x4a5bca93 14/07/2009 01:00:19 win32k.sys fffff960`000c0000 fffff960`003d4000 0x00314000 0x00000000 Dxapi.sys fffff880`04d56000 fffff880`04d62000 0x0000c000 0x4a5bc574 14/07/2009 00:38:28 udfs.sys fffff880`04d62000 fffff880`04db6000 0x00054000 0x4a5bc1f9 14/07/2009 00:23:37 monitor.sys fffff880`04db6000 fffff880`04dc4000 0x0000e000 0x4a5bc58c 14/07/2009 00:38:52 TSDDD.dll fffff960`004c0000 fffff960`004ca000 0x0000a000 0x00000000 hidusb.sys fffff880`04dc4000 fffff880`04dd2000 0x0000e000 0x4a5bcbfe 14/07/2009 01:06:22 HIDCLASS.SYS fffff880`04dd2000 fffff880`04deb000 0x00019000 0x4a5bcbfd 14/07/2009 01:06:21 HIDPARSE.SYS fffff880`04deb000 fffff880`04df3080 0x00008080 0x4a5bcbf9 14/07/2009 01:06:17 cdd.dll fffff960`00660000 fffff960`00687000 0x00027000 0x00000000 mouhid.sys fffff880`04c00000 fffff880`04c0d000 0x0000d000 0x4a5bca94 14/07/2009 01:00:20 luafv.sys fffff880`05a78000 fffff880`05a9b000 0x00023000 0x4a5bc295 14/07/2009 00:26:13 WudfPf.sys fffff880`05a9b000 fffff880`05abc000 0x00021000 0x4a5bcbd1 14/07/2009 01:05:37 crashdmp.sys fffff880`05abc000 fffff880`05aca000 0x0000e000 0x4a5bcabd 14/07/2009 01:01:01 dump_dumpata.sys fffff880`05aca000 fffff880`05ad6000 0x0000c000 0x4a5bc113 14/07/2009 00:19:47 dump_msahci.sys fffff880`05ad6000 fffff880`05ae1000 0x0000b000 0x4a5bcabd 14/07/2009 01:01:01 dump_dumpfve.sys fffff880`05ae1000 fffff880`05af4000 0x00013000 0x4a5bc18f 14/07/2009 00:21:51 vmnetbridge.sys fffff880`05af4000 fffff880`05b04000 0x00010000 0x4a800d26 10/08/2009 13:05:58 lltdio.sys fffff880`05b04000 fffff880`05b19000 0x00015000 0x4a5bcc92 14/07/2009 01:08:50 rspndr.sys fffff880`05b19000 fffff880`05b31000 0x00018000 0x4a5bcc92 14/07/2009 01:08:50 HTTP.sys fffff880`05b31000 fffff880`05bf9000 0x000c8000 0x4a5bc1a8 14/07/2009 00:22:16 bowser.sys fffff880`05a00000 fffff880`05a1e000 0x0001e000 0x4d6497da 23/02/2011 06:15:06 mpsdrv.sys fffff880`05a1e000 fffff880`05a36000 0x00018000 0x4a5bcc79 14/07/2009 01:08:25 mrxsmb.sys fffff880`05a36000 fffff880`05a63000 0x0002d000 0x4dc0bf1a 04/05/2011 03:51:06 mrxsmb10.sys fffff880`066ce000 fffff880`0671c000 0x0004e000 0x4e17c0a7 09/07/2011 03:44:55 mrxsmb20.sys fffff880`0671c000 fffff880`0673f000 0x00023000 0x4dc0bf19 04/05/2011 03:51:05 hcmon.sys fffff880`0673f000 fffff880`0674b000 0x0000c000 0x4b5a765b 23/01/2010 05:08:59 vmci.sys fffff880`0674b000 fffff880`06763000 0x00018000 0x4b5a6e03 23/01/2010 04:33:23 vmx86.sys fffff880`06896000 fffff880`0696c000 0x000d6000 0x4b5a8e0d 23/01/2010 06:50:05 MpNWMon.sys fffff880`0696c000 fffff880`0697c000 0x00010000 0x4d9cc7fb 06/04/2011 21:07:23 peauth.sys fffff880`06600000 fffff880`066a6000 0x000a6000 0x4a5bd8df 14/07/2009 02:01:19 secdrv.SYS fffff880`0697c000 fffff880`06987000 0x0000b000 0x4508052e 13/09/2006 14:18:38 srvnet.sys fffff880`06987000 fffff880`069b4000 0x0002d000 0x4dba2ca3 29/04/2011 04:12:35 tcpipreg.sys fffff880`069b4000 fffff880`069c6000 0x00012000 0x4a5bcccd 14/07/2009 01:09:49 vmnetuserif.sys fffff880`069c6000 fffff880`069d0000 0x0000a000 0x4b5a7a6b 23/01/2010 05:26:19 vstor2-mntapi10.sys fffff880`069d0000 fffff880`069dc000 0x0000c000 0x49e94462 18/04/2009 04:09:22 vstor2-ws60.sys fffff880`069dc000 fffff880`069e8000 0x0000c000 0x4ad39a52 12/10/2009 22:06:26 srv2.sys fffff880`06800000 fffff880`06867000 0x00067000 0x4dba2cb3 29/04/2011 04:12:51 srv.sys fffff880`06763000 fffff880`067f8000 0x00095000 0x4dba2cc1 29/04/2011 04:13:05 NisDrvWFP.sys fffff880`06867000 fffff880`0687f000 0x00018000 0x4d9cc855 06/04/2011 21:08:53 WinRing0x64.sys fffff880`0687f000 fffff880`06886000 0x00007000 0x488b26c1 26/07/2008 14:29:37 asyncmac.sys fffff880`0aa8f000 fffff880`0aa9a000 0x0000b000 0x4a5bcce5 14/07/2009 01:10:13 nvoclk64.sys fffff880`0aa9a000 fffff880`0aaaa000 0x00010000 0x4ab00e3d 15/09/2009 22:59:25 I'd apreciate any help because I'm well outside of my comfort zone.

  Read the article

• Ati X1600 driver problem on Mac

  - by Mulot

  Hi all, I currently own a 06' Macbook pro 1.1, and since some months I have recurrent problems of displays bug or artifacts. I searched quickly around to see that a lot of other users on Mac (iMac or Macbook pro) also have the same problem due to a problem for the X1600 video card. Apparently it's due to overheating problem, in my case even without warming a lot I have very bad display bugs such as colorful pixel lines, or glitches, and freeze and crash, all of this on Tiger, Leopard and Snow Leopard. I found this interesting article here talking about this problem and trying to gather people so that Apple take the serious GPU problem in consideration. In one of the comments, an user said he removed all bundle named with "radeon" and then he had no more problems under Leopard, and seems ot work fine well too on Snow Leopard. I did the same thing, I removed the bundles of the driver, restart, and no more problems, but not more 3D acceleration, which is not an acceptable solution. For those interested, here is the list of files to be deleted to stop having this problem. /System/Library/Extensions/ATIRadeonX1000.kext /System/Library/Extensions/ATIRadeonX1000GA.plugin /System/Library/Extensions/ATIRadeonX1000GLDriver.bundle /System/Library/Extensions/ATIRadeonX1000VADriver.bundle /System/Library/Extensions/ATIRadeonX2000.kext /System/Library/Extensions/ATIRadeonX2000GA.plugin /System/Library/Extensions/ATIRadeonX2000GLDriver.bundle /System/Library/Extensions/ATIRadeonX2000VADriver.bundle I would like to know if there is a way to fix this using other drivers if that's possible or by creating a group to force Apple to make a replacement program in place. Edit : How to locate those files on your hard drive if you are not under Snow Tiger : sudo find / -iname "*radeon*"

  Read the article

• How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

  - by Burnzy

  I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >