Search Results

Search found 3865 results on 155 pages for 'removing whitespace'.

Page 133/155 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• C# cross thread dialogue co-operation

  - by John Attridge

  K I am looking at a primarily single thread windows forms application in 3.0. Recently my boss had a progress dialogue added on a separate thread so the user would see some activity when the main thread went away and did some heavy duty work and locked out the GUI. The above works fine unless the user switches applications or minimizes as the progress form sits top most and will not disappear with the main application. This is not so bad if there are lots of little operations as the event structure of the main form catches up with its events when it gets time so minimized and active flags can be checked and thus the dialog thread can hide or show itself accordingly. But if a long running sql operation kicks off then no events fire. I have tried intercepting the WndProc command but this also appears queued when a long running sql operation is executing. I have also tried picking up the processes, finding the current app and checking various memory values isiconic and the like inside the progress thread but until the sql operation finishes none of these get updated. Removing the topmost causes the dialog to disappear when another app activates but if the main app is then brought back it does not appear again. So I need a way to find out if the other thread is minimized or no longer active that does not involve querying the actual thread as that locks until the sql operation finishes. Now I know that this is not the best way to write this and it would be better to have all the heavy processing on separate threads leaving the GUI free but as this is a huge ancient legacy app the time to re-write in that fashion will not be provided so I have to work with what I have got. Any help is appreciated

  Read the article

• How to clean up my code

  - by simion

  Being new to this i realy am trying to learn how to keep code as simple as possible, whilst doing the job its supposed to. The question i have done is from project eulur, it says Each new term in the Fibonacci sequence is generated by adding the previous two terms. By starting with 1 and 2, the first 10 terms will be: 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, ... Find the sum of all the even-valued terms in the sequence which do not exceed four million. Here is my code below, i was wondering what the best way of simplifying this would be, for a start removing all of the .get(list.length()-1 )..... stuff would be a good start if possible but i dont really no how to? Thanks public long fibb() { ArrayList<Integer> list = new ArrayList<Integer>(); list.add(1); list.add(2); while((list.get(list.size() - 1) + (list.get(list.size() - 2)) < 4000000)){ list.add((list.get(list.size()-1)) + (list.get(list.size() - 2))); } long value = 0; for(int i = 0; i < list.size(); i++){ if(list.get(i) % 2 == 0){ value += list.get(i); } } return value; }

  Read the article

• VS2010 and CSS: What is the best way to position a single form control

  - by George

  OK, I have a ton of controls on my page that I need to individually place. I need to set a margin here, a padding there, etc. None of these particular styles that I want to apply will be applied to more than control. What is the bets practice for determining at which level the style is placed, etc? OK, my choices are 1) External CSS file 1A) Using ClientIdMode = Auto (the default) I could assign a unique CssClass value to the ASP.NET control and, in the external CSS file, create a class selector that would only be applied to that one control. 1B) User Client ID = Predicatable In the external CSS file, I could determine what the ID will be for the controls of interest and create an ID selector (#ControlID{Style} ). However, I fear maintenance issues due to including/removing parent containers that would cause the ID to change. 1C) User Client ID = Static. I could choose static IDs for the controls such that I minimize the likelihood of a clash with auto generated IDs (perhaps by prefixing the ID with "StaticID_" and use an external stylesheet with ID selectors. 2) I could place the style right on the control. The only disadvantage here, as I see it, is that style info is brought down each time instead of being cached , which is what I'd get using an external CSS. If a style isn't resused, I personally don't see much benefit to placing it in an external file, though please explain why if you disagree. Is there moire of a reason that "It's nice to have all the CSS in one place?"

  Read the article

• CURL request incomplete, suspect timeout but not sure.

  - by girlygeek

  I am currently using CURL via a php script running as daily cron to export product data in csv format from a site's admin area. The normal way of exporting data will be to go to the Export page in a browser, and set the configuration, then click on "export data" button. But as the number of products I am exporting is very large, and it takes more than 5-10 mins to export the data, I've decided to use php's curl function to mimic this on a daily basis via cron. Previously, it is working fine, but recently as I increased the number of products in the store by 500+, the script fails to return the exported data. Testing it manually via clicking on the "export" button in a browser, does return the data correctly. Thus there is no "timeout" issue with running the export in a browser manually. I've tested and by removing/decreasing the number of products (thus the time needed), the php-curl script works fine again when run from cron. So I suspect that it has something to do with timeouts issue, specifically with the curl function in php. I've set both CURLOPT_TIMEOUT and CURLOPT_CONNECTTIMEOUT to '0' respectively to try. In the php-curl script, I've also set "set_time_limit(3000)". But still it does not work, and the request will timeout, with the script failing to return with a complete set of csv data. Any help in helping me resolve/understand this issue will be much appreciated!

  Read the article

• XPath Query - Select relative top level nodes

  - by John

  I'm trying to iterate over some elements in an XML document that may be nested, but as I iterate over them I may be removing some from the tree. I'm thinking the best way is to do this recursively, so I'm trying to come up with an XPath Query that will select all the top-level nodes relative to the current node. //foo[not(ancestor::foo)] works great at the document level, but I'm trying to figure out how to do this from a relative query. <foo id="1"> <foo id="2" /> <foo id="3"> <foo id="4"> <bar> <foo id="5"> <foo id="6" /> </foo> <foo id="7" /> </bar> </foo> </foo> </foo> If the current node is foo#3, I only want to select foo#4. When the current node is foo#4, I only want to select foo#5 and foo#7. I think I'm trying to select any descendant foo nodes of the current node, but without any ancestor foo nodes between the current node and the node I'm selecting. My conundrum is if we're already inside a foo node, not(ancestor::foo) doesn't help.

  Read the article

• Problem with configure script

  - by cube

  I am running into a problem with the ./configure script for ffmpeg. My linux environment uses busybox, which only allows for limited set of linux commands. One command which is used in the ffmpeg ./configure script is mktemp -u, the problem here is the busybox for linux does not recognize the -u switch as valid, so it complains about it and breaks the configure process. This is the relevant code in ./configure which uses the mktemp -u command: if ! check_cmd type mktemp; then # simple replacement for missing mktemp # NOT SAFE FOR GENERAL USE mktemp(){ echo "${2%XXX*}.${HOSTNAME}.${UID}.$$" } fi tmpfile(){ tmp=$(mktemp -u "${TMPDIR}/ffconf.XXXXXXXX")$2 && (set -C; exec > $tmp) 2>/dev/null || die "Unable to create temporary file in $TMPDIR." append TMPFILES $tmp eval $1=$tmp } I am not good with bash scripting at all, so I was wondering if anyone one had an idea on how I can force this configure script to not use mktemp -u and use the 'replacement' alternative option that is available in as per the snippet above. Thanks. btw... simply removing the -u switch does not work. Nor does replacing it with -t, or -p. I believe the mktemp has to be bypassed completely.

  Read the article

• Serializing an extended form object

  - by andyperfect

  I've been reading up on this whole subject, but I never came across this specific problem. I already understand that the whole idea of serializing an entire form is a horrible idea and just doesn't work. But, I am encountering a bit of a different problem. I have a class that inherits the "button" form object, that I call DataButton. Now for my problem. I want to be able to serialize this class, but I don't need any of the information from the actual button class. Is there any way to bypass the fact that I can't set the button form object to Serializable() and notify VB that when serialization is to occur, it should simply skip over that information? Theoretically, if such a procedure were possible, I'd be able to do the entire serialization without a hitch. I came up with the idea earlier of removing the "inherits" feature from the class, and having simply a button within the class, but that makes my program really difficult to work with as I am constantly changing the location, size, backgroundImage, text, and whatnot. Thus, immediate updates would be much tougher to work with. Any help would be greatly appreciated.

  Read the article

• JQuery remove() not working with a two word id

  - by Programer

  I have a button <button onclick="takedown()"> take down </button> that creates a H1 and button with the id of the text in my text field and h1 at the end for the h1 and button at the end for the button the button has a onclick onclick="delete()". This is that function function takedown(){ note = document.getElementById("noteinput").value; idh1 = note + "h1"; idbutton = note + "button"; idcenter = note + "center"; $('<center id="' + idcenter + '"> <h1 id="' + idh1 + '">' + note + '</h1> <button id="'+ idbutton +'" onclick="deletenote()"> Delete </button> </center>').appendTo("body"); } For the delete function the remove() works only if the id of the button and the h1 is one word. function deletenote(){ // First setting var idbuttondelete = event.target.id; var idh1delete = idbuttondelete.replace("button", "h1"); // Removing the button, h1,center $('#' + idbuttondelete).remove(); $('#' + idh1delete).remove(); } Does anybody know whats wrong or how to use JQuery to delete something if it has a two word id.

  Read the article

• F# insert/remove item from list

  - by Timothy

  How should I go about removing a given element from a list? As an example, say I have list ['A'; 'B'; 'C'; 'D'; 'E'] and want to remove the element at index 2 to produce the list ['A'; 'B'; 'D'; 'E']? I've already written the following code which accomplishes the task, but it seems rather inefficient to traverse the start of the list when I already know the index. let remove lst i = let rec remove lst lst' = match lst with | [] -> lst' | h::t -> if List.length lst = i then lst' @ t else remove t (lst' @ [h]) remove lst [] let myList = ['A'; 'B'; 'C'; 'D'; 'E'] let newList = remove myList 2 Alternatively, how should I insert an element at a given position? My code is similar to the above approach and most likely inefficient as well. let insert lst i x = let rec insert lst lst' = match lst with | [] -> lst' | h::t -> if List.length lst = i then lst' @ [x] @ lst else insert t (lst' @ [h]) insert lst [] let myList = ['A'; 'B'; 'D'; 'E'] let newList = insert myList 2 'C'

  Read the article

• Why in the world is this Moq + NUnit test failing?

  - by Dave Falkner

  I have this dataAccess mock object and I'm trying to verify that one of its methods is being invoked, and that the argument passed into this method fulfills certain constraints. As best I can tell, this method is indeed being invoked, and with the constraints fulfilled. This line of the test throws a MockException: data.Verify(d => d.InsertInvoice(It.Is<Invoice>(i => i.TermPaymentAmount == 0m)), Times.Once()); However, removing the constraint and accepting any invoice passes the test: data.Verify(d => d.InsertInvoice(It.IsAny<Invoice>()), Times.Once()); I've created a test windows form that instantiates this test class, runs its .Setup() method, and then calls the method which I am wishing to test. I insert a breakpoint on the line of code where the mock object is failing the test data.InsertInvoice(invoice); to actually hover over the invoice, and I can confirm that its .TermPaymentAmount decimal property is indeed zero at the time the method is invoked. Out of desperation, I even added a call back to my dataAccess mock: data.Setup(d => d.InsertInvoice(It.IsAny<Invoice>())).Callback((Invoice inv) => System.Windows.Forms.MessageBox.Show(inv.TermPaymentAmount.ToString("G17"))); And this gives me a message box showing "0". This is really baffling me, and no one else in my shop has been able to figure this out. Any help would be appreciated. A barely related question, which I should probably ask independently, is whether it is preferable to use Mock.Verify(...) as I have here, or to use Mock.Expect(...).Verifiable followed by Mock.VerifyAll() as I have seen other people doing? If the answer is situational, which situations would warrent the use of one over the other?

  Read the article

• auto_complete plugin error: Couldn't find Question with ID=auto_complete_for_tag_tag_name

  - by bgadoci

  I have successfully set up this plugin before so I am curious as to what I am doing wrong here. I have built the ability for users to add tags to questions. I am not using tagging plugin here but that shouldn't matter for this. With respect to the auto complete, I am trying to have the form located in the /views/questions/show.html.erb file access the Tags table and display entries in the tags.tags_name column. When I begin to type in the field I get the following error message: Processing QuestionsController#show (for 127.0.0.1 at 2010-05-31 15:22:20) [GET] Parameters: {"tag"=>{"tag_name"=>"a"}, "id"=>"auto_complete_for_tag_tag_name"} Question Load (0.1ms) SELECT * FROM "questions" WHERE ("questions"."id" = 0) ActiveRecord::RecordNotFound (Couldn't find Question with ID=auto_complete_for_tag_tag_name): app/controllers/application_controller.rb:15:in `init_data' For some reason I am actually passing the field name as the Question.id. The plugin set up is fairly simple as you add the following line to your controller: auto_complete_for :tag, :tag_name and the following line in your routes.rb file: map.resources :tags, :collection => {:auto_complete_for_tag_tag_name => :get } I have added the controller line to both my tags and questions controller and also mapped resources for both tags and questions in my routes.rb file: map.resources :tags, :collection => {:auto_complete_for_tag_tag_name => :get } map.resources :questions, :collection => {:auto_complete_for_tag_tag_name => :get } I have played around with removing either or of the above but can't seem to fix it. Any ideas what I am doing wrong here?

  Read the article

• How can I have a Label change dynamically based on a Slider Value?

  - by duney

  I'm writing a grade calculator and I currently have a slider with a textbox beside it which displays the current value of the slider: <Slider Name="gradeSlider" Grid.Row="3" Grid.Column="2" VerticalAlignment="Center" Minimum="40" Maximum="100" IsSnapToTickEnabled="True" TickFrequency="5" TickPlacement="BottomRight"/> <TextBox Name="targetGrade" Grid.Row="3" Grid.Column="3" Width="30" Height="23" Text="{Binding ElementName=gradeSlider, Path=Value}" TextAlignment="Center"/> However I'm struggling to include a label which will show display a different grade classification based on the slider's value range. I'd have thought that I could create the label: <Label Name="gradeClass" Grid.Row="2" Grid.Column="2" HorizontalAlignment="Center" VerticalAlignment="Bottom"/> And then use code: string gradeText; if (gradeSlider.Value >= 40 && gradeSlider.Value < 50) { gradeText = "Pass"; gradeClass.Content = gradeText; } else if (gradeSlider.Value >= 50 && gradeSlider.Value < 60) { gradeText = "2:2"; gradeClass.Content = gradeText; } else { gradeText = "so on..."; gradeClass.Content = gradeText; } But the label just stays as "Pass" whatever the slider value. Could somebody please advise me as to where I'm going wrong? I tried using Content = "{Binding Source = gradeText}" on the Label xaml and removing the gradeClass.Content's in the code but it complained that gradeText was declared but never used. Many thanks to anyone who can help.

  Read the article

• How can I prevent the scaling of a UIWebview's content after reorientation?

  - by frankhermes

  I'm building an iOS 5/6 app that has a UIWebView. It loads some HTML that I have embedded in my app. Now when I rotate my device, the WebView changes its size (as I want it to fill the entire width of the screen). And then it gets weird: some content gets scaled up and some content doesn't get scaled up. See this image with some example text in it: As you can see, the header (H6) stays the same, while the paragraph gets scaled up. Does anybody have an idea how to prevent this? I want the html to look the same in landscape as it does in portrait mode. I've tried setting the viewport scaling to 1: <meta name="viewport" content="initial-scale=1.0,max-scale=1.0"> but that doesn't help. The body's font-size style is set to 14px, but changing that to 14pt or a percentage also made no difference. Setting the width of the body to 100% also didn't help. Strangely, removing the line break (<br/>) that's in the text fixes it but I need line breaks to be in there so that's no solution. The only thing that does work is reloading the UIWebView's content after an orientation change, but that doesn't prevent it from looking wrong during rotation, and it resets any scrolling that the user may have done. Any ideas?

  Read the article

• PHP include taking too long

  - by wxiiir

  I have a php file with around 100mb which is full of arrays (only arrays). I've made a script that includes this file (for processing), first it exhausted the default Xampp 128mb memory limit, i've raised it to 1024mb but it just takes forever and doesn't do anything. I'm sure the problem is being created by the sheer size of the file because i've tried removing all lines of code and just leaving the include and an echo for me to know when it finishes executing, and it does the same thing (which is taking forever), i've also tried to run the 100mb file in separate and same thing again. A 10mb file is taking forever as well but a similar 1mb file is almost instantly read and executed so the problem must be more than just the file size. I was avoiding using c++ for a simple project as this and would rather not to as php is easier for me and the task that will be executed doesn't need to benefit from the added speed that it would have if it had been done in c++ but if i have no luck in solving this problem i guess i'll have to. EDIT Reasons for not using a database: 1-Whoever made it didn't used a database and it will be pretty hard to store this in an organized database if i'm not able to do something with it first, like just reading it, copying parts from it or putting in memory or something. 2-I don't have experience working with databases as pretty much all stuff i've ever done in php didn't needed large amounts of stored data, 50kb at best, if i was thinking about a big project or huge chunks of data as this one, i definitely would, but i didn't made this mess to start with and now i have to undo it. 3-The logic for having to store a small portion of data like 10mb in hard drive when now every computer has pretty much enough ram to fit the whole OS in it is pretty much incomprehensible unless someone gives a good explanation about it, if i had to access a lot of said files simultaneously i would understand but like i said, this is a simple project, this is the only file that will be accessed at a given time this isn't even to make some kind of website, it's to run a few times and be done with it.

  Read the article

• Velocity CTP: can we 'search' for objects?

  - by Stato Machino

  It appears that 'tags' allow us to associate a 'search term' with the objects placed into the Velocity cache space. However, these can only be queried within a 'region'. Further, regions somehow limit the locality of objects in the cache to a single server (or maybe something kinda like that). So this appears to make it hard to perform any operation for which the unique Id of the cached item is not persisted or continuously available to the application that stores and retrieves objects to and from the cache. In any case, I can't see an easy way to 'cleanse' the cache of objects or to find objects across the entire cache that may share some prefix, postfix or infix values in the cache key so that i can clear out the cache of object repeatedly created in unit tests, for example. And I am unsure about the consequences of regions being associated with single server cache locations. So I would appreciate any help with the following questions: What is the difference between a 'distributed cache' (called a 'partitioned' cache??) when using regions, and a 'local cache'? 1.a. In particular, are the region-oriented values in a distributed cache visible through a cache factory that is configured to 'see' the entire cache space? Are the operations of creating and removing 'regions' efficient enough that it would be reasonable to create a region and a group of tags for each bundle of objects that need to be cached? 2.a. Or does this just push the problem of scoping the 'search for objects' up the chain because the ability of the DataCache object to query down through regions and tags as limited as querying for the cache keys of objects themselves. Thanks, Stato

  Read the article

• Using LINQ, need help splitting a byte array on data received from Silverlight sockets

  - by gcadmes

  The message packats received contains multiple messages deliniated by a header=0xFD and a footer=0xFE // sample message packet with three // different size messages List<byte> receiveBuffer = new List<byte>(); receiveBuffer.AddRange(new byte[] { 0xFD, 1, 2, 0xFE, 0xFD, 1, 2, 3, 4, 5, 6, 7, 8, 0xFE, 0xFD, 33, 65, 25, 44, 0xFE}); // note: this sample code is without synchronization, // statements, error handling...etc. while (receiveBuffer.Count > 0) { var bytesInRange = receiveBuffer.TakeWhile(n => n != 0xFE); foreach (var n in bytesInRange) Console.WriteLine(n); // process message.. // 1) remove bytes read from receive buffer // 2) construct message object... // 3) etc... receiveBuffer.RemoveRange(0, bytesInRange.Count()); } As you can see, (including header/footer) the first message in this message packet contains 4 bytes, and the 2nd message contains 10 bytes,a and the 3rd message contains 6 bytes. In the while loop, I was expecting the TakeWhile to add the bytes that did not equal the footer part of the message. Note: Since I am removing the bytes after reading them, the header can always be expected to be at position '0'. I searched examples for splitting byte arrays, but non demonstrated splitting on arrays of unknown and fluctuating sizes. Any help will be greatly appreciated. thanks much!

  Read the article

• Remove file from history completely

  - by Iain

  A colleague has done a few things I told them not to do: forked the origin repo online cloned the fork, added a file that shouldn't have been added to that local repo pushed this to their fork I've then: merged the changes from the fork and found the file I want to remove this from: my local repo the fork their local repo I have a solution for removing something from the history, taken from Remove file from git repository (history). What I need to know is, should my colleague also go through this, and will a subsequent push remove all info from the fork? (I'd like an alternative to just destroying the fork, as I'm not sure my colleague will do this) SOLUTION: This is the shortest way to get rid of the files: check .git/packed-refs - my problem was that I had there a refs/remotes/origin/master line for a remote repository, delete it, otherwise git won't remove those files (optional) git verify-pack -v .git/objects/pack/#{pack-name}.idx | sort -k 3 -n | tail -5 - to check for the largest files (optional) git rev-list --objects --all | grep a0d770a97ff0fac0be1d777b32cc67fe69eb9a98 - to check what files those are git filter-branch --index-filter 'git rm --cached --ignore-unmatch file_names' - to remove the file from all revisions rm -rf .git/refs/original/ - to remove git's backup git reflog expire --all --expire='0 days' - to expire all the loose objects (optional) git fsck --full --unreachable - to check if there are any loose objects git repack -A -d - repacking the pack git prune - to finally remove those objects

  Read the article

• Using an iterator without its container

  - by User1

  I am mixing some C and C++ libraries and have only a single pointer available to do some work in a callback function. All I need to do is iterate through a vector. Here's a simplified, untested example: bool call_back(void* data){ done=... if (!done) cout << *data++ << endl; return done; } Note that this function is in an extern "C" block in C++. call_back will be called until true is returned. I want it to cout the next element each time it's called. data is a pointer to something that I can pass from elsewhere in the code (an iterator in the above example, but can be anything). Something from data will likely be used to calculate done. I see two obvious options to give to data: Have data point to my vector. Have data point to an iterator of my vector. I can't use an iterator without having the .end() method available, right? I can't use a vector alone (unless maybe I start removing its data). I could make a struct with both vector and iterator, but is there a better way? What would you do?

  Read the article

• In sync query calls, one query causing other query to run slower. Why?

  - by Irchi

  Sorry for the long question, but I think this is an interesting situation and I couldn't find any explanations for it: I was involved in optimization of an application that performed a large number of sequential SELECT and INSERT statements on a single dedicated SQL Server database. The process needs to INSERT a large number of records into a table, but for each of them there should be some value mappings, which performed using SELECT statements on another table in the same database. For a specific execution, it took 90 minutes to run. I used a profiler (JProfiler - the application is Java-based) to determine how much time does each part of the application take. It yields that 60% of the time was spent on INSERT method calls, and almost 20% on SELECT calls (the rest distributed in other parts). After some trials, I came to this situation: I commented out the INSERT query that took 60% of the time. I was expecting for the total run time to be around 35 minutes, as I have removed 60% of the 90 minutes. But the whole process took the same 90 minutes (doing only SELECTs and nothing else), but each SELECT took longer this time! Everything was running sync, there were no async calls. And there was only one single thread of execution. SELECT and INSERT queries are very simple, and don't have anything special, and they are on different tables, but on the same DB. I tested with both the DB on the application machine, and on a remote network machine. I can't think of any explanation for this, as the Profiler (Application profiler, not SQL Profiler) reported the changes in the method call times, and by removing INSERT statements SELECT statements took longer to run. Can anyone give me some kind of explanation of what could have happened? (there can't be cache / query optimization stuff, because the queries were run in sync, and in a single thread, and it was far from affecting the cache this much) I should note that the bottleneck of the speed was in SQL server, using most of the CPU time.

  Read the article

• PHP cache header override

  - by Soyo

  I've been through over 100 answers here, lots to try, NOTHING working?? Have a PHP based site. I need caching OFF for all .php files EXCEPT A SELECT FEW. So, in .htaccess, I have the following: ExpiresActive On # Eliminate caching for certain dynamic files <FilesMatch "\.(php|cgi|pl)$"> ExpiresDefault A0 Header set Cache-Control "no-cache, no-store, must-revalidate, max-age=0, proxy-revalidate, no-transform" Header set Pragma "no-cache" </FilesMatch> Using Firebug, I see the following: Cache-Control no-cache, no-store, must-revalidate, max-age=0, proxy-revalidate, no-transform Connection Keep-Alive Content-Type text/html Date Sun, 02 Sep 2012 19:22:27 GMT Expires Sun, 02 Sep 2012 19:22:27 GMT Keep-Alive timeout=3, max=100 Pragma no-cache Server Apache Transfer-Encoding chunked X-Powered-By PHP/5.2.17 Hey, Looks great! BUT, I have a couple .php pages I need some very short caching on. I thought the simple answer was having this added to the very top of each php page in which I want caching enabled: <?php header("Cache-Control: max-age=360"); ?> Nope. Then I tried various versions of the above. Nope. Then I tried meta http-equiv variations. Nope. Then I tried variations of the .htaccess code along with the above variations, such as limiting it to: # Eliminate caching for certain dynamic files <FilesMatch "\.(php|cgi|pl)$"> Header set Cache-Control "no-cache, max-age=0" </FilesMatch> Nope. It seems nothing I do will allow a single .php to be cache enabled with the .htaccess code in place, short of removing the statements from the .htaccess file altogether. Where am I going wrong? What do I have to do to get individual php pages to be cacheable while the rest remain off?? Thank you for any thoughts.

  Read the article

• Hide form if javascript disabled

  - by Kero

  I need to check on disabling JavaScript if the user disabled JavaScript from browser or firewall or any other place he will never show the form. I have lots of search and solutions, but unfortunately didn't got the right one. - Using style with no-script tag: This one could be broke with removing style... <noscript> <style type="text/css"> .HideClass { display:none; } </style> </noscript> The past code will work just fine but there is lots of problems in no-script tag as here Beside that i don't want to redirect user with no-script tag too...Beside that i can quickly stop loading the page to broke this meta or disable Meta tag from IE: <meta http-equiv="refresh" content="0; URL=Frm_JavaScriptDisable.aspx" /> Another way to redirect user with JavaScript but this will work let's say for 99% of users and this one isn't lovely way and will slow down the website... window.location="http://www.location.com/page.aspx"; Is there is any other ideas or suggestions to secure working with JavaScript...and prevent user from entering the website or see my form except when JavaScript enabled...

  Read the article

• subset complete or balance dataset in r

  - by SHRram

  I have a dataset that unequal number of repetition. I want to subset a data by removing those entries that are incomplete (i.e. replication less than maximum). Just small example: set.seed(123) mydt <- data.frame (name= rep ( c("A", "B", "C", "D", "E"), c(1,2,4,4, 3)), var1 = rnorm (14, 3,1), var2 = rnorm (14, 4,1)) mydt name var1 var2 1 A 2.439524 3.444159 2 B 2.769823 5.786913 3 B 4.558708 4.497850 4 C 3.070508 2.033383 5 C 3.129288 4.701356 6 C 4.715065 3.527209 7 C 3.460916 2.932176 8 D 1.734939 3.782025 9 D 2.313147 2.973996 10 D 2.554338 3.271109 11 D 4.224082 3.374961 12 E 3.359814 2.313307 13 E 3.400771 4.837787 14 E 3.110683 4.153373 summary(mydt) name var1 var2 A:1 Min. :1.735 Min. :2.033 B:2 1st Qu.:2.608 1st Qu.:3.048 C:4 Median :3.120 Median :3.486 D:4 Mean :3.203 Mean :3.688 E:3 3rd Qu.:3.446 3rd Qu.:4.412 Max. :4.715 Max. :5.787 I want to get rid of A, B, E from the data as they are incomplete. Thus expected output: name var1 var2 4 C 3.070508 2.033383 5 C 3.129288 4.701356 6 C 4.715065 3.527209 7 C 3.460916 2.932176 8 D 1.734939 3.782025 9 D 2.313147 2.973996 10 D 2.554338 3.271109 11 D 4.224082 3.374961 Please note the dataset is big, the following may not a option: mydt[mydt$name == "C",] mydt[mydt$name == "D", ]

  Read the article

• iPhone loading view from nib only works once

  - by The Swissdude

  Hi Forum I'm trying to add a «loader-view» to my app which shows a spinner while doing stuff. This works fine the first time, but it doesn't work a second time. here's what I do: I have a viewController for the spinner (spinnerViewController) and a nib-file which I made in IB (spinner.xib). I load the nib in the viewDidLoad-event: spinnerView = [[spinnerViewController alloc] initWithNibName:@"spinner" bundle:nil]; [spinnerView retain]; spinnerView is declared in the .h-file (spinnerViewController *spinnerView;) next, I show the spinner-view: [self.view addSubview:spinnerView.view]; [self.view bringSubviewToFront:spinnerView.view]; which works fine... And now the trouble starts. No matter what I do, I can't show the spinner view again. I tried just hiding it (self.view sendSubViewToBack: spinnerView.view) which works for hiding, but when I try to bring it to the front again (self.view bringSubViewToFront: spinnerView.view) it doesn't work. I also tried removing the spinner-view and add it again with no success (within the spinnerViewController: [self.view removeFromSuperview] and to show it again [self.view addSubview... ) Any ideas what I'm doing wrong??? ;) Thanks for the help!

  Read the article

• auto_complete plugin error: Couldn't find Question with ID=auto_complete_for_...

  - by bgadoci

  I have successfully set up this plugin before so I am curious as to what I am doing wrong here. I have built the ability for users to add tags to questions. I am not using tagging plugin here but that shouldn't matter for this. With respect to the auto complete, I am trying to have the form located in the /views/questions/show.html.erb file access the Tags table and display entries in the tags.tags_name column. When I begin to type in the field I get the following error message: Processing QuestionsController#show (for 127.0.0.1 at 2010-05-31 15:22:20) [GET] Parameters: {"tag"=>{"tag_name"=>"a"}, "id"=>"auto_complete_for_tag_tag_name"} Question Load (0.1ms) SELECT * FROM "questions" WHERE ("questions"."id" = 0) ActiveRecord::RecordNotFound (Couldn't find Question with ID=auto_complete_for_tag_tag_name): app/controllers/application_controller.rb:15:in `init_data' For some reason I am actually passing the field name as the Question.id. The plugin set up is fairly simple as you add the following line to your controller: auto_complete_for :tag, :tag_name and the following line in your routes.rb file: map.resources :tags, :collection => {:auto_complete_for_tag_tag_name => :get } I have added the controller line to both my tags and questions controller and also mapped resources for both tags and questions in my routes.rb file: map.resources :tags, :collection => {:auto_complete_for_tag_tag_name => :get } map.resources :questions, :collection => {:auto_complete_for_tag_tag_name => :get } I have played around with removing either or of the above but can't seem to fix it. Any ideas what I am doing wrong here? UPDATE: My QuestionsController#show action is fishing posts by: @question = Question.find(params[:id])

  Read the article

• php png image transparency

  - by user1334130

  I have been working with some code to draw a circle but I am having problems with removing the black background from the shape. I am using imagecopyresampled for its AA features in order to draw a smooth circle, so I can't use a different drawing function. Thanks. <?php $img_2 = imagecreatetruecolor(200, 200); $red = imagecolorallocate($img_2, 255, 0, 0); imagefill($img_2, 0, 0, $red); //set circle values $xPos = 50; $yPos = 80; $diameter = 40; $img_1 = imagecreatetruecolor(($diameter + 2) * 2, ($diameter + 2) * 2); $green = imagecolorallocate($img_1, 0, 255, 0); //draw the circle imagefilledarc($img_1, $diameter+1, $diameter+1, ($diameter + 2) * 2, ($diameter + 2) * 2, 0, 360, $green, IMG_ARC_PIE); imagecopyresampled($img_2, $img_1, $xPos, $yPos, 0, 0, $diameter+2, $diameter+2, ($diameter + 2) * 2, ($diameter + 2) * 2); header("Content-type: image/png"); imagepng($img_2); imagedestroy($img_1); imagedestroy($img_2); ?>

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >