Search Results

Search found 5786 results on 232 pages for 'umbraco scripts'.

Page 133/232 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• Set Default Program for All Users on Server

  - by MattN

  I work with a large server environment that's running Windows Server 2003, 2008, and 2012 now on some boxes. We have a custom-built log viewer program that associates with two file types that I'd like to set to be the default program for all users across all boxes, so new users don't have to set the default program themselves on every box they log into. Ideally I'd like to have a simple registry script we could push out to all machines at once. I realize this likely means changing the registry entries for either HKCR or HKLM for the file extensions, but adding the program location with %1 extension to \shell\open\command value in HKLM simply opens the program and does not also load the log file. Am I just missing an open and play setting, or am I looking at this entirely wrong? (And I know the script will need to be different for 2003 and 2008, but changing the version for two scripts isn't hard) Thanks!

  Read the article

• Where do you find the Bash source files of programs in Linux/Mac OSX?

  - by AndrewKS

  I am currently writing some convenience methods for my terminal in my bash_profile and am sure if what I am writing is "the best way". I figure a good way to verify whether what I'm doing is right or not would be to find some source code of more established programs and see how they do it. My question then is, where can I find this code on my Mac? An example is, with Macports installed, where is the source code that opens the port interactive console when I type nothing but "port" in my shell? (I added Linux in the title even though I am on a Mac because I assume the answer would be the same for both) Edit: The answer I am looking for is in terms of which directory relative to the programs will I find their unix scripts.

  Read the article

• Apache configuration to accept all data

  - by ServerDown

  Hi, I have apache running on port 7979 to talk with a device that sends data to webserver and later will run php scripts to process and send reply xml. The problem now is that it sends data like POST HTTP/1.1 Content-Type:text/xml Content-Length:369 Followed by XML When apache sees this it gives a 400 error. Since the device cannot be changed is there any way to accept the full data sent from the device and write to some log? Currently apache simply keeps sending 400 errors back. If there was a way to log the entire xml or create some custom handler for 400 error then the xml could be read by a php script. Looking forward to solutions.

  Read the article

• Brocade 200E Switch - Fibre Channel

  - by Arthor

  What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

  Read the article

• Is there some way Linux editors can tell the programming language without the file extension?

  - by vfclists

  I am editing some scripts on Linux without the languages file extensions, and it seems that the editors, namely vi, nano and gedit are not applying syntax highlighting because the filenames don't use the language extensions. Is there some parameters to be passed or some setting that can enable them to recognize the language? Update: After some googling I realize that bash has that ability, at least to do some parsing or check the shebang at the top determine the language. By default Ubuntu does not install the complete vim package, so after installing it, the shell files are recognized. I don't know about nano or gedit, but vi and its graphical counterpart will do.

  Read the article

• What useful things can one add to one's .bashrc?

  - by gyaresu

  Is there anything that you can't live without and will make my life SO much easier? Here are some that I use ('diskspace' & 'folders' are particularly handy). # some more ls aliases alias ll='ls -alh' alias la='ls -A' alias l='ls -CFlh' alias woo='fortune' alias lsd="ls -alF | grep /$" # This is GOLD for finding out what is taking so much space on your drives! alias diskspace="du -S | sort -n -r |more" # Command line mplayer movie watching for the win. alias mp="mplayer -fs" # Show me the size (sorted) of only the folders in this directory alias folders="find . -maxdepth 1 -type d -print | xargs du -sk | sort -rn" # This will keep you sane when you're about to smash the keyboard again. alias frak="fortune" # This is where you put your hand rolled scripts (remember to chmod them) PATH="$HOME/bin:$PATH"

  Read the article

• "killed" message from cron.daily, but not when run from command line

  - by Dan Stahlke

  On Fedora 17, I put a file into /etc/cron.daily with the following contents: cd / su dstahlke /home/dstahlke/bin/anacron-daily.sh exit 0 For some reason, I get a mail every day that just says /etc/cron.daily/dstahlke-daily: ...killed. I tried with and without the exit 0 line above (I noticed that some system scripts have that and others don't, I'm not sure of the purpose). Running /etc/cron.daily/dstahlke-daily from the command line as root produces no ...killed message. Other than the message, everything seems to work fine. Putting set -x in the above script, as well as in the /home/dstahlke/bin/anacron-daily.sh script shows that the ...killed message happens just after the latter script terminates (or perhaps just after the su command finishes). What causes the ...killed message? Or, is there a more acceptable way to have anacron run a user script daily? I figured that putting this in /etc/cron.daily would help the system coordinate all of the daily tasks rather than potentially running my task concurrently with the system tasks.

  Read the article

• Linux script to find time difference and send an email if need

  - by Gnanam

  Hi, I'm not an expert in writing shell scripts but also I'm looking for a very specific solution. OS: CentOS release 5.2 (Final) I've a Java standalone which keeps writing (all System.out.println) to a log file. For some unknown reason, this Java standalone stops working at some point of time in my server and eventually logs writing also stops working. I want to have a script which checks the last modified date & time of the log file with current date & time in the server. If the time difference exceeds more than 5 minutes, I want to send an email immediately to my recipients list. This way I'll come to know when this Java standalone has stopped working. I'll move this script to crontab and make it run for every 1 minute, so that this whole process is automated. Log file location: /usr/local/logs/standalone.log

  Read the article

• WGet or cURL: Mirror Site from http://site.com And No Internal Access

  - by alharaka

  I have tried wget -m wget -r and a whole bunch of variations. I am getting some of the images on http://site.com, one of the scripts, and none of the CSS, even with the fscking -p parameter. The only HTML page is index.html and there are several more referenced, so I am at a loss. curlmirror.pl on the cURL developers website does not seem to get the job done either. Is there something I am missing? I have tried different levels of recursion with only this URL, but I get the feeling I am missing something. Long story short, some school allows its students to submit web projects, but they want to know how they can collect everything for the instructor who will grade it, instead of him going to all the externally hsoted sites.

  Read the article

• Saving each layer of a Photoshop image to separate files

  - by BadKnees

  I have a PSD file with all icons in separate layers as vectors. I would like to save them in different sizes to use in iPhone, iPhone4 and iPad. I tried Files Scripts Export Layers to Files That took about 15 minutes to save each layer while the computer was overheating from the work. Tried with two different computers, one with CS4 and the other with CS5. Same result. And that doesn't allow me to set sizes. Seem like most icon packs, like pictos, glyphish and iconsweets are distributed in this way, in one PSD file. Is some easy way to get them out of the PSD and into PNG files?

  Read the article

• Minutely cron, ensuring only a single instance

  - by Christopher Nadeau

  Is there a way to run a script every minute (or 2, or 5, etc), but only if it isn't already running? We have a set of scripts that need to run every minute. Sometimes they might start and finish in a second, other times they might go on for 5 minutes. Our current way of avoiding simultaneous executions is by setting a is_running flag in each script, and exiting if it's still enabled. But this is a little unreliable (i.e., fatal errors would cause the flag to remain enabled even after the script halted). We could write our own little manager, but I'm wondering if there is a more fashionable solution that already exists.

  Read the article

• bridge to share WiFi internet connection over eth0

  - by rubo77

  In this script there is implemented that you create a mesh network and connect other machines to your device to serve an internet connection with dhcp: echo "starting bridge to share internet connection over eth0" ifconfig eth0 up promisc brctl addbr br-freifunk brctl addif br-freifunk bat0 brctl addif br-freifunk eth0 echo "internet starting, this may take some minutes due to latency..." echo "(use" echo "tail -f /var/log/syslog" echo "in another window for debugging)" echo echo dhclient br-freifunk echo "The error 'Rather than invoking init scripts through /etc/init.d...' can be ignored:" dhclient br-freifunk # without bridge: dhclient bat0 This works fine with the freifunk-mesh network. But how can I serve internet in a normal case? I would like to connect to any open Wifi I find with my network-manager or wicd (yes, with the graphical GUI) and then start a small script that creates a bridge to my network-out on my laptop I use Ubuntu and my networkcards are eth0 and wlan0

  Read the article

• Need personal music collection streaming solution

  - by purpler

  I used to use Opera and it's built in media server feature for some time and it both worked and looked really well. It's dead now and i'm in search of a decent audio streaming solution (Windows 8) to be able to stream my music collection via http to work or whatever.. I tried couple of PHP scripts but they all looked really awful, also, tried couple of solutions mentioned here at Superuser but i wasn't really satisfied.. I tried vibestreamer as well and while it looks really nice i'm not really into installing it as an application. I've set up an WAMP server which i intend to use in this purpose. I'd be mostly satisfied with a way to browse my collection folders and pick the one i want to play, no playlists and various sorting features a la iTunes. Any suggestions? Thanks

  Read the article

• Close - python.

  - by Jahkr

  Hi there, I'm new to Python. I use Python 2.7 and I am running Windows Vista (64-bit). How do I make it when I click on .py scripts... that it opens up in IDLE so I can edit it a snap? Ya know... without having to open IDLE by itself. Heh. I got all the way to C:\Python27\Lib\idlelib but I don't see the IDLE application. Then when I do right-click and "Default open with" and select the idle.bat file.. I get this: Thanks!

  Read the article

• How Do I Schedule Cron to Run at Specific intervals?

  - by Russ

  I have 6 scripts that each take about 20 minutes to run, I want to schedule cron to run the first 3 at 00, 20, and 40 on the odd hours and the second 3 at the same intervals on the even hours. How can I tell cron to do this? is it something like this: 0 2,4,6,8,10,12,14,16,18,20,22,24 * * * root Script1 20 2,4,6,8,10,12,14,16,18,20,22,24 * * * root Script2 40 2,4,6,8,10,12,14,16,18,20,22,24 * * * root Script3 0 1,3,5,7,9,11,13,17,19,21,23 * * * root Script4 20 1,3,5,7,9,11,13,17,19,21,23 * * * root Script5 40 1,3,5,7,9,11,13,17,19,21,23 * * * root Script6

  Read the article

• script Disk Management configuration

  - by Joseph

  I have 10 workstations with large monitors that have USB slots and several card readers built in. The card readers cannot be disabled and will map to drive letters when I image the computers. I go into Disk Management and delete the drive mappings and add mappings to a single folder in C:\ with a folder for each slot. I have to do this because of scripts that run that are expecting specific letter drive mappings to network resources. Is there a way to script the deleting and adding of drive mappings instead of having to use the Disk Management GUI manually on each workstation? The workstations are running XP Professional.

  Read the article

• Any way to program a system which automatically restores home / sql database

  - by Mirage

  I have made two shell scripts Script 1: It does all Home directory backups with name username_home_date.tar.gz Script 2: It does SQL backups of all sites every 3 hrs. username_databse_date.sql.gz Now currently if I want to restore the site, I have to copy the tar file to /home/username and then untar there with all the permissions as well and then manually import the database. Is there any way (for instance a program, system or script) that I can just select which backup I want to restore and do automatically? Maybe like a cPanel addon thing.

  Read the article

• Apache rewrite module, 404 not found

  - by Eneroth3

  I've been having some problems with rewriting directory styled addresses into query strings for my php scripts. Here's the code RewriteRule ^(\w+)/?(\w+)?/?(\w+)?/?$ /index.php?section=$1&category=$2&subcategory=$3 [QSA] This line works perfectly fine on both my local wamp and lamp server, and my friend's lamp server. However on the web hotel I've been using (freehostia) I only get a 404 error when trying to browse a "directory" that isn't really there (supposed to be generated by php). I've tried connecting their support but they only say 3rd party applications aren't their job. I know rewriteEngine is turned on because some basic redirect attempts have worked. Perhaps this line of code could be better written? It's quite important that extra queries are appended and would be nice (but not necessary) if the last slash could be left out. Any help is appreciated :)

  Read the article

• Executing EXE with wildcard from psexec

  - by Danny

  I'm writing a few scripts that I am using to integrate with bamboo for some continuous integration improvements and I've run into a bit of a snag. I'm currently trying to run a psexec command that installs the latest build on the remote machine but I dont necessary know the revision number. For example, the remote exe file could be Installer-3.1.xxxxx.exe where the xxxxx changes. I tried running the command with Installer-3.1.*.exe but it takes it as literal in Windows. I'm not overly familiar with Windows command prompt and am more used to Linux at this moment.

  Read the article

• Which tool / technology: System management for databases and dependent services

  - by Filburt

  I'm looking for advice on how to enable our team to take down and re-start our company systems for maintainance purposes. The scenario includes several Oracle db machines several MS SQL Server machines with multiple instances windows services (IIS etc.) BizTalk EAI solution Apache and Tomcat instances lots of scheduled tasks on win2003 and win2008 machines (physical and virtual). The main focus is on capture all dependencies between said databases and services and tasks connecting to them. At the moment an enterprise class solution is not an option. We are considering developing a solution driven by PowerShell scripts but I hope for some more suggestions.

  Read the article

• Secure Apache PHP vhost configuration

  - by jsimmons

  I'm looking to secure some websites running under apache using suexec. At the moment php is executed with the user/group of the file being executed. This seems to me, not secure enough. It stops vhosts interfering with each other, but does not stop malicious code writing anywhere in the vhost being used. I was thinking that a possibility would be to run scripts as nobody/vhost group, that way the vhost user could still have full access to the vhost directories, but executing php would only be able to write to files with g+w, and to execute files with g+x. This I think should stop arbitrary writing in the web dir from compromised php. Just wondering if this is crazy, ridiculous, stupid? Of course this would be done on top of existing security measures.

  Read the article

• Windows Azure openSUSE: rcnetwork not starting

  - by djechelon

  I have a Linux VM in Azure, created from their default image. My problem is simply that the init script network doesn't look like to start, so dependent services (apache, postfix...) won't start. If I run yast runlevel and try to start postfix it asks me to start network first: if I accept, network is started without errors and then postfix is started. While network is configured to start on boot, it just doesn't appear to have started. Anyway, SSH connections work fine. Currently, I had to edit my init scripts and remove network from the Required-Start list, but that didn't work for posftix (even after running systemctl --system daemon-reload). How can I fix all this?

  Read the article

• How to run Firefox jailed without serious performance loss?

  - by Vi

  My Firefox configuration is tricky: Firefox runs at separate restricted user account which cannot connect to main X server. Firefox uses Xvfb (virtual "headless" X server) as X server. x11vnc is running on that Xvfb. On the main X server there is vncviewer running that connect to this x11vnc On powerful laptop (Acer Extensa 5220) it seems to work more or less well, but on "Acer Aspire One" netbook it is slowish (on a background that firefox is loaded with lots of extensions). How to optimise this scheme? Requirements: Browser cannot connect to main X server. Browser should be in chroot jail (no "suid" scripts, readonly for many things) Browser should have a lot of features (like in AutoPager, NoScript, WoT, AdBlockPlus)

  Read the article

• How to synchronize users, passwords, hosts, etc without NIS

  - by joshxdr

  I am administering a very small solaris 2.6 network with 4 boxes total. Is it possible to use scp or similar to replace NIS for synchronizing users, groups, hosts, etc? This network is only a small part of my job and I don't want to spend too much time on it, and I am worried the setup and maintenence of NIS will not pay off. I need it to behave like a proper multi-user system, when a user logs into any machine, the users, passwords, hosts, etc. are always the same. Is there an easy way to do this with scp? Right now I copy /etc/passwd from one box to another with scp, but sometimes I make mistakes or forget a step, and scp inside of shell scripts don't seem to works so well since they require password authentication. Any recommendations would be welcome.

  Read the article

• Load Testing Linux Virtual Server

  - by Anubhav Agarwal

  I have configured a Linux virtual network with following configuration 172.17.6.112- VIP 172.17.6.111- Linux Director | |----------172.17.6.113 --- Real Server 1 |----------172.17.6.114 --- Real Server 2 I am using direct routing technique. I am unable to test my LVS network. Are there some good scripts/softwares available for load testing. I am running apache2.0 service on them. I came across with testlvs on the internet but am unable to understand its documentation. Are there more simpler ones I want to test the response time of server using various scheduling algorithms .

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >