Search Results

Search found 29876 results on 1196 pages for 'ubuntu 8 04 lts'.

Page 134/1196 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• Ubuntu 9.1 Only Sees 244 MB RAM, while BIOS and Windows Sees 1.5 GB

  - by nicorellius

  I have 1.5 GB of RAM installed on an older Dell, Pentium 4. I just installed Ubuntu 9.1 and the system is only seeing 244 MB of RAM, even though there is 1.5 GB on the system. The BIOS sees all of it. I ran a Knoppix disc and it only saw 25 MB upon booting. I made no particular changes to the installation taht would affect this. I looked through the BIOS and the only setting I could see was the AGP aperture. Not even sure what this is. Anyone know where I went wrong? I also tried moving the memory modules around on the board. Booted with the 1 GB stick, still saw 244 MB.

  Read the article

• Ubuntu Kernel Panic on Inserting Network Cable

  - by Skizz

  I've been having a recurring kernel panic with my Ubuntu 9.04 installation (see other posts by me). Today, I was fiddling around trying to get some cable attached when the system panicked. Looking at the layout, the only cable in the vicinity was the network cable. Upon further investigation, it seems that the system reliably panics whenever I insert a network cable. Removing the cable does not cause the panic. How do I stop the system panicking when I insert the network cable? If more information is needed, please add comments/answers and I'll post the required data.

  Read the article

• 3D plotting in Ubuntu

  - by Bakhtiyor

  I have Ubuntu 10.10 installed and need to plot 3D graphic. I have installed several free applications available in the repository, like QtiPlot and GNU Octave. I have found out and created the following graphic. Now I have to show in the same graphic the position of my experiment results, which consist of elements with three parameters: X, Y and Z coordinates which had been calculated with the same function as above graphic. Any idea to do that? Would be better if you propose solution in free apps,because there are several proprietary apps like Maple or MATLAB. Thank you very much. UPDATE 1 The final result should be more or less like this:

  Read the article

• Ubuntu 11.04 and OpenLDAP - where is the config?

  - by Tom SKelley

  I've been asked to setup a multimaster LDAP environment on Ubuntu 11.04 - instead of a single master server. I cloned the master server and recreated it into two VMs. I am trying to follow the instructions on the OpenLDAP documentation here: http://www.openldap.org/doc/admin24/replication.html and it talks about modifying the cn=config tree within LDAP. The subdirectory tree appears to be there at: /etc/ldap/slapd.d/ and a slapcat -b cn=config drops out a load of config information. When I try to connect using a browser and the admin bind credentials: ldapsearch -D '<adminDN>' -w <password> -b 'cn=config' I get: # extended LDIF # # LDAPv3 # base <> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # search result search: 2 result: 32 No such object I don't see the config context when I connect via an LDAP browser either. I'm sure I'm missing something, but I can't see what it is!

  Read the article

• Configuring vsftpd with nginx on ubuntu

  - by arby

  I have vsftpd installed on Ubuntu 12.04LTS along with nginx, php, and sql on an Amazon ec2 instance. The web server is good to go, but I'm having trouble connecting to the FTP server. I'm not quite sure how to set the privileges or what configuration options I might be missing. By default, the location of the web root is at /usr/share/nginx/www and it is owned by root:root. The web server runs as user www-data in the group www-data. I've opened port 21 and set the passive ports in the ec2 backend and ufw firewall. In vsftpd.conf, I have: ... anonymous_enable=NO local_enable=YES local_umask=0027 chroot_local_user=YES pasv_enable=YES pas_max_port=12100 pasv_min_port=12000 port_enable=YES ... Now, I'm unsure how to create the FTP user that when I login, displays my web directory with write access. I've tried it a few different ways, but I keep running into errors (either no connection, no write access, or very slow timeouts.)

  Read the article

• Configuration Tuning for PostgreSQL 9.1 PostGIS 1.5 Ubuntu 12.04 Server

  - by Martin

  My server performance is poor. At times SSH, top, and other features or commands are very slow to respond, taking several seconds or more. A query that normally takes 5 minutes can sometimes take 30 minutes. The database is mostly being used to do a spatial query (grid and summarize) on approximately 500GB of stored data spread between 4 tables. Restarting the server works as a temporary fix, but cannot be used as a long term solution. Any suggestions for how to diagnose and solve my performance issues? Hardware and Configuration: 3.3 GHz Intel quad core i5 16 GB DDR3 RAM 6 TB software RAID 10 (6 x 2 TB drives) Ubuntu 12.04 64-bit Postgres 9.1 PostGIS 1.5

  Read the article

• Ubuntu 10.04: unable to login after fresh install

  - by Richard

  Hello All, I,ve just installed a fresh copy of Ubunutu 10.04, downloaded a couple of days ago. The installation seemed to go fine. However I can't log in: the login screen just seems to reset and asks me for my password again. It's not an authentication / incorrect password issue. If I stick in a wrong password, I get "Authentication failure". I've googled around, others report the same issue on the Ubuntu forums, but there doesn't seem to be a fix. Does anyone know of a work around or what the problem is? Have 9.10, I might end up just installing that instead. THanks

  Read the article

• Watch videos from a remote computer on the LAN on ubuntu

  - by tapan

  I want to watch the videos on a friends computer on the LAN without having to download it. Both of us are running ubuntu. Now one way is to ssh to his computer, cd to the directory where the video is and run the falling command: cat video.avi | ssh me@mycomputer mplayer - This works. However the problem is that I cannot seek inside the video as in can't go forward or backward in it. Is there a method by which I can watch the videos and also seek in them ? I can install any software on his comp and my comp to aid this process. I have root level access on both computers. Any suggestions ?

  Read the article

• Unable to connect my computer from LAN (http, smb) in UBUNTU 10.04

  - by Abdul Majeed

  I installed ubuntu 10.04, Apache, PHP, mysql, smb. Everything work fine in locally in my IP. When i trying to access my computer from LAN (other computer), it shows unable to connect. when i ping my IP from remote computer, its pinging OK. I can access internet, and all other systems (http, smb). But the problem is no one can't access my computer remotely in my LAN network. My ip is 192.168.85.105 and i want access(Appaceh,SMB) from 192.168.85.10. Is there any proxy firewall settings? I had tried following commands.. sudo iptables -F or sudo iptables-restore [logout require] If it does not work then try to disable net-filter sudo ufw --disable Please give me the solution.

  Read the article

• On Ubuntu installed NginX and Can't find where new WWW root is

  - by Nick Not

  On Ubuntu 13.04 the original WWW was in /var/www/ then I installed NginX and it installed correctly but I can't find the actual folder accessible by http (I looked in /etc/nginx/). I searched for index.htm, index.html and index.php but there are hundreds of results. Is there a command I can run to tell me what folder http is pointed to? I tried searching for this but I am not sure what keywords to use . Places I looked in: /usr/share/nginx/www /usr/share/www /usr/share/html /var/www /etc/nginx/

  Read the article

• ubuntu input/output error

  - by rplevy

  I'm having a problem with Ubuntu that I'm finding hard to troubleshoot for reasons that will become clear: reboot -bash: /sbin/reboot: Input/output error dmesg -bash: /bin/dmesg: Input/output error ps -e ps: error while loading shared libraries: /lib/libproc-3.2.8.so: cannot read file data: Input/output error lsof -bash: /usr/bin/lsof: Input/output error fsck -bash: /sbin/fsck: Input/output error badblocks -bash: /sbin/badblocks: Input/output error So I can't see what is going on, and I can't remotely reboot. What can I do to get to the bottom of this? Interestingly: init 0 Segmentation fault I can cat /var/syslog but not /var/log/messages or several other important files. less and more don't work, neither do tail or head, etc.

  Read the article

• No virtual console on ubuntu 12.10

  - by Buzzzz

  When I try to do a ctr-alt f(1-6) in ubuntu 12.10 I only get a black screen with a blinking cursor but no login prompt. Any ideas on what could be wrong? It is a fresh install of 12.10 using a amd radeon 5850 graphics card. i have tried different things in my /etc/default/grub but at the moment I use the following: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vga=normal" #GRUB_CMDLINE_LINUX="vga=0x0376" #RUB_CMDLINE_LINUX_DEFAULT="vga=0x014c" #GRUB_CMDLINE_LINUX="vga=0x014c" #GRUB_GFXPAYLOAD_LINUX=1600x1200x24 # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console

  Read the article

• Cannot start Oracle XE 11gR2 Net Listener and Database on Ubuntu 13.04

  - by hydrology

  I have been following the setup step on this article for installing Oracle XE 11g R2 on Ubuntu 13.04. The environment variables PATH, ORACLE_HOME, ORACLE_SID, NLS_LANG ORACLE_BASE have all been set up correctly. simongao:~ 06:16:38$ echo $PATH /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/simongao/adt-bundle-linux-x86_64-20130219/sdk/platform-tools:/u01/app/oracle/product/11.2.0/xe/bin simongao:~ 06:18:36$ echo $ORACLE_HOME /u01/app/oracle/product/11.2.0/xe simongao:~ 06:23:29$ echo $ORACLE_SID XE simongao:~ 06:23:35$ echo $ORACLE_BASE /u01/app/oracle simongao:~ 06:23:37$ sudo echo $LD_LIBRARY_PATH /u01/app/oracle/product/11.2.0/xe/lib simongao:~ 06:23:48$ echo $NLS_LANG /u01/app/oracle/product/11.2.0/xe/bin/nls_lang.sh However, when I try to startup the service, I receive the following error information. simongao:~ 06:18:40$ sudo service oracle-xe start Starting Oracle Net Listener. Starting Oracle Database 11g Express Edition instance. Failed to start Oracle Net Listener using /u01/app/oracle/product/11.2.0/xe/bin/tnslsnr and Oracle Express Database using /u01/app/oracle/product/11.2.0/xe/bin/sqlplus.

  Read the article

• Accessing Windows 7 Printer from Ubuntu Linux via LPR/LPD or Samba

  - by nitbuntu

  Hi, I'm having difficulty printing from my Linux (Ubuntu 10.04) based PC to a printer connected to a Windows 7 machine. I was trying to connect using Samba (version 3.5.6) but this always brings up an authentication screen which never accepts any password I use. So I read somewhere that an alternative is to access the Windows printer via LPR/LPD. I added an LPR/LPD printer in Windows 7, but even within Windows 7, I am not able to print as the print que monitor shows as 'printer busy'. The printer in question is an Epson Stylus DX7400 and works fine when using the standard USB ports....but doesn't when I use with the LPR/LPD ports. I even opened up the TCP/IP port 515 in my McAfee firewall without any success. Any help with this would be highly appreciated. Additionally, does anyone have any idea how I can get Samba working for me?

  Read the article

• Wireless card not found on Ubuntu

  - by idealflip

  Hello all, I'm trying to setup Ubuntu on an old PC. I ran the following command, lspci, in order to get info on the wireless card installed. 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03) Does anyone know where I can get drivers for this card/chip? And also, how to install (I'm rather new to linux). Also, I'm sure the card is working because I just formatted over xp, and everything was working well. Thanks in advanced!

  Read the article

• Configuring ejabberd on ubuntu ami of amazon ec2

  - by andy

  This is my first experience with ejabberd. Spare me if I miss anything. I have installed ejabberd server on ubuntu 12.04 AMI on Amazon EC2. I have successfully installed the server, added the admin user and host in the config file and opened up reqd ports (5222, 5223, 5269, 5280). Now I tried to login the web admin interface using the admin user id and password. I could log in, BUT I could only see one section, Virtual Hosts. No Control Lists, Access rules, Nodes and Statistics Menu items on the left. Also, when I click Virtual Hosts Menu item, the page that comes up does not show anything. Here are the screenshots

  Read the article

• Ubuntu login takes 15 seconds, "I/O error dev fd0 sector 0"

  - by Dan

  After upgrading to Ubuntu 10.04, when I first login it takes 10+ seconds where it just sits at the gdm backgroup before taking me to gnome. By switching to a terminal window during this 10 seconds I saw the error message "I/O error /dev/fd0 sector 0" being outputted. I assume this has to do with the floppy drive... but I don't even have a floppy drive! How do I disable this device and make this error message go away (and hopefully fix the long wait)? Thanks.

  Read the article

• NIS server setting problem in ubuntu

  - by Asma

  Hi, I set NFS for server-client that works properly. Now I am trying to set NIS server-client on same PC's. I am following the instruction from "SettingUpNISHowTo" from https://help.ubuntu.com/community/SettingUpNISHowTo link. But in step-10, "sudo /etc/init.d/nis restart".......it show error fail. If I try to use "ypcat passwd" to check......it shows error YPBINDPROC_DOMAIN: Domain not bound No such map passwd.byname. Reason: Can't bind to server which serves this domain Can anyone able to help me to get rid out from this problem? Is all the step in the document is proper to configure the NIS server? Thanks in advance.

  Read the article

• Adding unallocated partition to Ubuntu in VMware

  - by AMS949

  I've installed Ubuntu 9.10 on a Windows XP using vmware. As most do, I initially setup the size of the virtual drive to 8GB and soon realized I need more. I used the VMware utility to expand the virtual drive and added another 4GB, which I can see using GParted. Now my dilemma is how can I "merge" the newly created space to my original? I need to add the unallocated space. I tried before and after formatting the new space but still whenever I try to resize/move /dev/sda1 it looks like it is using its maximum capacity. Also, GParted is being used from the GParted live CD not from the Linux live CD.

  Read the article

• Mount encrypted hfs in ubuntu

  - by pagid

  I try to mount an encrypted hfs+ partition in ubuntu. An older post described quite good how to do it, but lacks the information how to use encrypted partitions. What I found so far is: # install required packages sudo apt-get install hfsprogs hfsutils hfsplus loop-aes-utils # try to mount it mount -t hfsplus -o encryption=aes-256 /dev/xyz /mount/xyz But once I run this I get the following error: Error: Password must be at least 20 characters. So I tried to type it in twice, but that results in this: ioctl: LOOP_SET_STATUS: Invalid argument, requested cipher or key (256 bits) not supported by kernel Any suggestions? Thx Edit: One thing I'm not sure about is whether I use the right password. My assumption is that it is my default one for these situations. But I'm not sure whether Max OSX choose another password (internally) for that.

  Read the article

• Running Ubuntu with multiple monitors having a panel each

  - by Andreas Grech

  I have just installed Ubuntu and I'm trying to set up a correct configuration for having multiple monitors. I want the two monitors to have their own workspaces, yet the ability to drag a window from one monitor to the next. I also want a separate panel (taskbar) for each monitor. I have played around with nvidia-settings and tried the following different configs: Having both monitors `Use separate X screen" A panel for each monitor but I couldn't drag windows from one monitor to the next Using TwinView The ability to drag windows from one monitor to the next but only a single panel for the primary display Now I want to have the above configurations combined. Basically, as I stated beforehand, having a separate panel for each monitor and also the ability to drag windows across monitors. Can anyone provide me with suggestions please?

  Read the article

• Ubuntu 9.10: switch in KVM, mouse is detected but not usable immediately

  - by CarlF

  I use a KVM switch to jump between my tower and laptop, both placed on my desk. With Ubuntu 9.04 this worked perfectly. In 9.10, when I switch to the tower, then back to the laptop, the mouse is detected (as shown by /var/log/messages) but moving it has no effect. If I use Ctrl-Alt-F1 to switch to the TTY, then Alt-F7 back to Xorg, the mouse starts working. The tower is running Windows 7, but that shouldn't matter. Sometimes, but not other times, the USB keyboard on the KVM switch is also not usable and I have to use the laptop's built-in keyboard to switch to the TTY. The laptop has two monitors, the built-in and an external. It's (obviously) the external panel that is attached via the KVM switch. Any suggestions? Report to Canonical as a bug?

  Read the article

• new ubuntu server installation - java server not receiving packets

  - by James

  I have developed a Java server which listens for UDP packets which come from mobile devices. At the moment, it works correctly if I run my Server on my windows PC. I can receive and respond to the UDP packets sent from my phone (over 3g, not wifi). However, I am trying to run the Server on a different computer which I found lying around my house. I have basically done a clean install of Ubuntu Server edition, updated it, installed the java run time environment and configured port forwarding to allow connections on the appropriate port. I have also tried to disable the firewall. The problem is, it doesn't appear as if the server is receiving any packets and I've exhausted my brain thinking on how to solve/debug the problem. Can anyone suggest to me what the problem might be? or more likely something I can do to help me find out more information about what is going wrong.

  Read the article

• Ubuntu: Take actions when system temperature gets too high

  - by Josh

  One of the CPU fans on my Compaq Presario laptop running Ubuntu 9.10 seems to have bit the dust. The fan is deep within the case and I intend to replace the laptop in the next 6 months so it's not worth replacing it. I have the laptop on a cooling pad and most of the time the system is fine, CPU temps around 90°-110°F. Occasionally, however, I'm seeing random lockups which I believe is due to the system overheating. How can I configure the system to: Lower the CPU speed when the temperature reaches a certain level? (I.E. 110°F) Shutdown the system when the tempature reaches a critical level? (And what would that be? 130°?)

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >