Search Results

Search found 35604 results on 1425 pages for 'text align'.

Page 1347/1425 | < Previous Page | 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354  | Next Page >

• Why are emails sent from my applications being marked as spam?

  - by Brian

  Hi. I have 2 web apps running on the same server. The first is www.nimikri.com and the other is www.hourjar.com. Both apps share the same IP address (75.127.100.175). My server is through a shared hosting company. I've been testing my apps, and at first all my emails were being delivered to me just fine. Then a few days ago every email from both apps got dumped into my spam box (in gmail and google apps). So far the apps have just been sending emails to me and nobody else, so I know people aren't manually flagging them as spam. I did a reverse DNS lookup for my IP and the results I got were these: 100.127.75.in-addr.arpa NS DNS2.GNAX.NET. 100.127.75.in-addr.arpa NS DNS1.GNAX.NET. Should the reverse DNS lookup point to nimikri.com and hourjar.com, or are they set up fine the way they are? I noticed in the email header these 2 lines: Received: from nimikri.nimikri.com From: Hour Jar <[email protected]> Would the different domain names be causing gmail to think this is spam? Here is the header from one of the emails. Please let me know if any of this looks like a red flag for spam. Thanks. Delivered-To: [email protected] Received: by 10.231.157.85 with SMTP id a21cs54749ibx; Sun, 25 Apr 2010 10:03:14 -0700 (PDT) Received: by 10.151.130.18 with SMTP id h18mr3056714ybn.186.1272214992196; Sun, 25 Apr 2010 10:03:12 -0700 (PDT) Return-Path: <[email protected]> Received: from nimikri.nimikri.com ([75.127.100.175]) by mx.google.com with ESMTP id 28si4358025gxk.44.2010.04.25.10.03.11; Sun, 25 Apr 2010 10:03:11 -0700 (PDT) Received-SPF: neutral (google.com: 75.127.100.175 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=75.127.100.175; Authentication-Results: mx.google.com; spf=neutral (google.com: 75.127.100.175 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] Received: from nimikri.nimikri.com (localhost.localdomain [127.0.0.1]) by nimikri.nimikri.com (8.14.3/8.14.3) with ESMTP id o3PH3A7a029986 for <[email protected]>; Sun, 25 Apr 2010 12:03:11 -0500 Date: Sun, 25 Apr 2010 12:03:10 -0500 From: Hour Jar <[email protected]> To: [email protected] Message-ID: <[email protected]> Subject: [email protected] has invited you to New Event MIME-Version: 1.0 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit

  Read the article

• design of orm tool

  - by ifree

  Hello , I want to design a orm tool for my daily work, but I'm always worry about the mapping of foreign key. Here's part of my code: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Data; namespace OrmTool { [AttributeUsage(AttributeTargets.Property)] public class ColumnAttribute:Attribute { public string Name { get; set; } public SqlDbType DataType { get; set; } public bool IsPk { get; set; } } [AttributeUsage(AttributeTargets.Class,AllowMultiple=false,Inherited=false)] public class TableAttribute:Attribute { public string TableName { get; set; } public string Description { get; set; } } [AttributeUsage(AttributeTargets.Property)] public class ReferencesAttribute : ColumnAttribut { public Type Host { get; set; } public string HostPkName{get;set;} } } I want to use Attribute to get the metadata of Entity ,then mapping them,but i think it's really hard to get it done; public class DbUtility { private static readonly string CONNSTR = ConfigurationManager.ConnectionStrings["connstr"].ConnectionString; private static readonly Type TableType = typeof(TableAttribute); private static readonly Type ColumnType = typeof(ColumnAttribute); private static readonly Type ReferenceType = typeof(ReferencesAttribute); private static IList<TEntity> EntityListGenerator<TEntity>(string tableName,PropertyInfo[] props,params SqlParameter[] paras) { return null; } private static IList<TEntity> ResultList() { return null; } private static SqlCommand PrepareCommand(string sql,SqlConnection conn,params SqlParameter[] paras) { SqlCommand cmd = new SqlCommand(); cmd.CommandText = sql; cmd.Connection = conn; if (paras != null) cmd.Parameters.AddRange(paras); conn.Open(); return cmd; } } I don't know how to do the next step, if every Entity has it's own foreign key,how do I get the return result ? If the Entity like this: [Table(Name="ArtBook")] public class ArtBook{ [column(Name="id",IsPk=true,DataType=SqlDbType.Int)] public int Id{get;set;} [References(Name="ISBNId",DataType=SqlDataType.Int,Host=typeof(ISBN),HostPkName="Id")] public ISBN BookISBN{get;set;} public .....more properties. } public class ISBN{ public int Id{get;set;} public bool IsNative{get;set;} } If I read all ArtBooks from database and when I get a ReferencesAttribute how do I set the value of BookISBN?

  Read the article

• A New Threat To Web Applications: Connection String Parameter Pollution (CSPP)

  - by eric.maurice

  Hi, this is Shaomin Wang. I am a security analyst in Oracle's Security Alerts Group. My primary responsibility is to evaluate the security vulnerabilities reported externally by security researchers on Oracle Fusion Middleware and to ensure timely resolution through the Critical Patch Update. Today, I am going to talk about a serious type of attack: Connection String Parameter Pollution (CSPP). Earlier this year, at the Black Hat DC 2010 Conference, two Spanish security researchers, Jose Palazon and Chema Alonso, unveiled a new class of security vulnerabilities, which target insecure dynamic connections between web applications and databases. The attack called Connection String Parameter Pollution (CSPP) exploits specifically the semicolon delimited database connection strings that are constructed dynamically based on the user inputs from web applications. CSPP, if carried out successfully, can be used to steal user identities and hijack web credentials. CSPP is a high risk attack because of the relative ease with which it can be carried out (low access complexity) and the potential results it can have (high impact). In today's blog, we are going to first look at what connection strings are and then review the different ways connection string injections can be leveraged by malicious hackers. We will then discuss how CSPP differs from traditional connection string injection, and the measures organizations can take to prevent this kind of attacks. In web applications, a connection string is a set of values that specifies information to connect to backend data repositories, in most cases, databases. The connection string is passed to a provider or driver to initiate a connection. Vendors or manufacturers write their own providers for different databases. Since there are many different providers and each provider has multiple ways to make a connection, there are many different ways to write a connection string. Here are some examples of connection strings from Oracle Data Provider for .Net/ODP.Net: Oracle Data Provider for .Net / ODP.Net; Manufacturer: Oracle; Type: .NET Framework Class Library: - Using TNS Data Source = orcl; User ID = myUsername; Password = myPassword; - Using integrated security Data Source = orcl; Integrated Security = SSPI; - Using the Easy Connect Naming Method Data Source = username/password@//myserver:1521/my.server.com - Specifying Pooling parameters Data Source=myOracleDB; User Id=myUsername; Password=myPassword; Min Pool Size=10; Connection Lifetime=120; Connection Timeout=60; Incr Pool Size=5; Decr Pool Size=2; There are many variations of the connection strings, but the majority of connection strings are key value pairs delimited by semicolons. Attacks on connection strings are not new (see for example, this SANS White Paper on Securing SQL Connection String). Connection strings are vulnerable to injection attacks when dynamic string concatenation is used to build connection strings based on user input. When the user input is not validated or filtered, and malicious text or characters are not properly escaped, an attacker can potentially access sensitive data or resources. For a number of years now, vendors, including Oracle, have created connection string builder class tools to help developers generate valid connection strings and potentially prevent this kind of vulnerability. Unfortunately, not all application developers use these utilities because they are not aware of the danger posed by this kind of attacks. So how are Connection String parameter Pollution (CSPP) attacks different from traditional Connection String Injection attacks? First, let's look at what parameter pollution attacks are. Parameter pollution is a technique, which typically involves appending repeating parameters to the request strings to attack the receiving end. Much of the public attention around parameter pollution was initiated as a result of a presentation on HTTP Parameter Pollution attacks by Stefano Di Paola and Luca Carettoni delivered at the 2009 Appsec OWASP Conference in Poland. In HTTP Parameter Pollution attacks, an attacker submits additional parameters in HTTP GET/POST to a web application, and if these parameters have the same name as an existing parameter, the web application may react in different ways depends on how the web application and web server deal with multiple parameters with the same name. When applied to connections strings, the rule for the majority of database providers is the "last one wins" algorithm. If a KEYWORD=VALUE pair occurs more than once in the connection string, the value associated with the LAST occurrence is used. This opens the door to some serious attacks. By way of example, in a web application, a user enters username and password; a subsequent connection string is generated to connect to the back end database. Data Source = myDataSource; Initial Catalog = db; Integrated Security = no; User ID = myUsername; Password = XXX; In the password field, if the attacker enters "xxx; Integrated Security = true", the connection string becomes, Data Source = myDataSource; Initial Catalog = db; Integrated Security = no; User ID = myUsername; Password = XXX; Intergrated Security = true; Under the "last one wins" principle, the web application will then try to connect to the database using the operating system account under which the application is running to bypass normal authentication. CSPP poses serious risks for unprepared organizations. It can be particularly dangerous if an Enterprise Systems Management web front-end is compromised, because attackers can then gain access to control panels to configure databases, systems accounts, etc. Fortunately, organizations can take steps to prevent this kind of attacks. CSPP falls into the Injection category of attacks like Cross Site Scripting or SQL Injection, which are made possible when inputs from users are not properly escaped or sanitized. Escaping is a technique used to ensure that characters (mostly from user inputs) are treated as data, not as characters, that is relevant to the interpreter's parser. Software developers need to become aware of the danger of these attacks and learn about the defenses mechanism they need to introduce in their code. As well, software vendors need to provide templates or classes to facilitate coding and eliminate developers' guesswork for protecting against such vulnerabilities. Oracle has introduced the OracleConnectionStringBuilder class in Oracle Data Provider for .NET. Using this class, developers can employ a configuration file to provide the connection string and/or dynamically set the values through key/value pairs. It makes creating connection strings less error-prone and easier to manager, and ultimately using the OracleConnectionStringBuilder class provides better security against injection into connection strings. For More Information: - The OracleConnectionStringBuilder is located at http://download.oracle.com/docs/cd/B28359_01/win.111/b28375/OracleConnectionStringBuilderClass.htm - Oracle has developed a publicly available course on preventing SQL Injections. The Server Technologies Curriculum course "Defending Against SQL Injection Attacks!" is located at http://st-curriculum.oracle.com/tutorial/SQLInjection/index.htm - The OWASP web site also provides a number of useful resources. It is located at http://www.owasp.org/index.php/Main_Page

  Read the article

• Mouse scroll not working in a scroll viewer with a wpf datagrid and additional UI elements

  - by paladugu457

  I am trying to figure out how to get the mouse scroll working on a wpf window with a scrollviewer and a datagrid within it. The WPF and C# code is below <ScrollViewer HorizontalScrollBarVisibility="Disabled" VerticalScrollBarVisibility="Auto"> <Grid> <Grid.RowDefinitions> <RowDefinition/> <RowDefinition/> </Grid.RowDefinitions> <Grid Grid.Row="0"> <Border Name="DataGridBorder" BorderThickness="2" Margin="1" CornerRadius="4" BorderBrush="#FF080757"> <dg:DataGrid AutoGenerateColumns="False" Name="ValuesDataGrid" BorderThickness="0" CanUserResizeColumns="True" FontWeight="Bold" HorizontalScrollBarVisibility="Auto" CanUserReorderColumns="False" IsReadOnly="True" IsTextSearchEnabled="True" AlternationCount="2" SelectionMode="Extended" GridLinesVisibility="All" HeadersVisibility="Column" CanUserAddRows="False" CanUserDeleteRows="False" CanUserResizeRows="False" CanUserSortColumns="False" RowDetailsVisibilityMode="Collapsed" SelectedIndex="0" RowStyle="{StaticResource CognitiDataGridRowStyle}" > <dg:DataGrid.Columns> <dg:DataGridTemplateColumn Header="Title" > <dg:DataGridTemplateColumn.CellTemplate> <DataTemplate> <StackPanel Orientation="Horizontal" > <TextBlock HorizontalAlignment="Left" VerticalAlignment="Center" Text="{Binding Path=Name}" FontWeight="Normal" /> </StackPanel> </DataTemplate> </dg:DataGridTemplateColumn.CellTemplate> </dg:DataGridTemplateColumn> </dg:DataGrid.Columns> </dg:DataGrid> </Border> </Grid> <Button Grid.Row="1" Height="90" >hello world</Button> </Grid> </ScrollViewer> and the C# code is as follows public partial class Window1 : Window { public Window1() { InitializeComponent(); initialize(); } public void initialize() { ObservableCollection<MyObject> testList = new ObservableCollection<MyObject>(); for (int i = 0; i < 20; i++) { MyObject my = new MyObject("jack " + i); testList.Add(my); } ValuesDataGrid.ItemsSource = testList; } } public class MyObject { public string Name { get; set; } public MyObject(string name) { Name = name; } } The problem i am facing is that when using the mouse to scroll, it works fine when it is over the button but as soon as i move the mouse pointer over the grid and try to scroll, nothing happens. I am able to move the scrollbar of the scrollviewer directly though. I am still a wpf novice so any help on how to get the mouse scroll to work over the datagrid would be appreciated. I am guessing there should be a pretty easy solution for this but I havent been able to figure it out

  Read the article

• IE6 "frame" layout with 100% height and scrollbars

  - by Joe

  I want to achieve a simple "frame" layout with fixed header, fixed left navigation area, and a main content area that fills 100% of the remainder of the viewport with scrollbars if necessary. My best attempt is below - but when I add enough content to the main div to force scrolling, I see that the scrollbar extends below the bottom of the viewport. What am I doing wrong? Or what is IE6 doing wrong and how can I fix it? NB please don't recommend using a more recent browser - I'd love to but can't. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head> <title></title> <style type="text/css"> html, body { height:100%; margin:0; padding:0; overflow:hidden; } div { border:0; margin:0; padding:0; } div#top { background-color:#dddddd; height:100px; } div#left { background-color:#dddddd; float:left; width:120px; height:100%; overflow:hidden; } div#main { height:100%; overflow:auto; } </style> </head> <body> <div id="top">Title</div> <div id="left">LeftNav</div> <div id="main"> Content <p> Lorem ipsum ... </p> ... repeated several times ... </div> </body> </html>

  Read the article

• Share and Deliver BI Publisher Reports in Multiple Languages

  - by kanichiro.nishida

  When you share your reports with someone who speak and read in different languages you want your reports to be shown in their language, right ? Well, translating reports with BI Publisher is not only easy but also reduces the maintenance cost a lot. Many of us in the BI Publisher product development team used to work in Globalization and Multi Lingual support, which enables Oracle products and applications to be used in many different languages and countries and territories.  And we have a lot of experience in this area. In fact, being a strategic reporting platform for Oracle EBS, PeopleSoft, JD Edwards, Siebel, and many other Oracle application products, our customers from all over the world are generating thousands of thousands of reports, including out-of-the-box pre-developed reports from Oracle and customer created or customized reports, in their own local language everyday as they operate and manage their business. Today, I’m going to talk about this very topic, how to translate my reports with BI Publisher 11G. Translation Grows, not the Numbers of the Reports Most of the reporting tools, regardless if it’s traditional or new, always take this translation on the back burner. They require their users to copy an original report and translate the whole thing. So when you want to support additional10 languages you will need to have 10 copies of the original. Imagine when you have 50 reports then you will end up having 500 reports (50 x 10) ! Now you need to maintain these 500 reports, whenever you need to make a change in a report you need to apply the same change to the other 10 reports. And as you imagine this is not only a nightmare for IT managements but not acceptable especially for the applications like Oracle EBS that supports over 30 languages. So first thing we did was, very simple, we separated the translation out of the report and marry it to the report only at the report generation. This means, regardless of how many languages you need to support you need to have only one report and translation files for the 10 languages, which would contain the translated letters and words. So let’s say you have 50 reports and need to support 10 languages for those reports you still have only 50 reports and each report now has 10 language translation files. Yes, translation is the one should grow as you add more languages to support, not the report itself! And second, we provide the translation files in XLIFF format, which is an international standard XML based format to exchange and maintain translation strings. So once you generate the XLIFF files for your reports with BI Publisher then you can work with any translation vendors in the world to make a mass translation or you can translate the XML files by yourself by manually updating the translatable strings presented in this text file. Lastly, we made it easier to manage the translation process starting from generating the XLIFF files to uploading the translated XLIFF files back to the BI Publisher server. You can generate, download, upload the XLIFF files from the BI Publisher’s Web interface with your browser and you can see the translated reports right away without needing to shutdown or restart your server. While the translated reports are displayed based on your language preference setting you can also specify a different language when you schedule or deliver the reports so that they can be generated in your customer’s preferred language. What Can I Translate? When it comes to translation there are three things. First, report content translation. When you receive a report you like to see the content like report title, section title, comments, annotation, table column header, and anything that are static and embedded in the report. in your preferred language. We call this Reports Content translation. Second, when you open a report online you might want to see not only the report content being translated but also the report UI, such as report name, parameter name, layout name, and anything that would help you to navigate around the reports, to be translated in your language. We call this Reports UI translation. And this separation of the Reports Content and Reports UI translation makes it very useful especially when you want to navigate through the reports in your preferred language UI but want to generate the reports in your customer’s preferred language. Imagine you are English native speaker and need to generate and send a report to your customers in China. You like to see the report name, parameter name in English so that you can comfortably navigate to the report and generate the report output, but like to see the report generated in Chinese so that the your customers in China can understand the report when they receive it. And lastly, you might want to see even the data presented in the report to be translated. For example, you might want to see product names in an Order Status report to be translated based on the report viewer’s language preference. We call this Reporting Data translation. Since this Reporting Data translation is maintained at the data source level such as Database tables along with the main data, you need to prepare the translation at the data source level first. Then, you want to make sure that your query is switched accordingly based on the language preference setting so that the translated data will be retrieved. How to Translate BI Publisher Reports? Now when it comes to ‘how to translate BI Publisher reports?’ the main focus here is about the translation for the Report Content and Report UI. And I just created this video to show you how to create and manage the translation with BI Publisher 11G. Please take a look at the clip below.   In today’s business world, customers and suppliers are from all over the world regardless of the size of the company or organization. Supporting multiple languages for your reports is no longer something ‘nice to have’, it’s mandatory. BI Publisher is designed to support multi lingual reports from the beginning without any extra hidden cost of license or configuration like other reporting tools such as Crystal Reports. You can support additional languages translation at any time with the very simple steps shown in the video above. Happy translation! Please share your translation experience with us! 

  Read the article

• Windows Azure Virtual Machine Readiness and Capacity Assessment for SQL Server

  - by SQLOS Team

  Windows Azure Virtual Machine Readiness and Capacity Assessment for Windows Server Machine Running SQL Server With the release of MAP Toolkit 8.0 Beta, we have added a new scenario to assess your Windows Azure Virtual Machine Readiness. The MAP 8.0 Beta performs a comprehensive assessment of Windows Servers running SQL Server to determine you level of readiness to migrate an on-premise physical or virtual machine to Windows Azure Virtual Machines. The MAP Toolkit then offers suggested changes to prepare the machines for migration, such as upgrading the operating system or SQL Server. MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Now, let’s walk through the MAP Toolkit task for completing the Windows Azure Virtual Machine assessment and capacity planning. The tasks include the following: Perform an inventory View the Windows Azure VM Readiness results and report Collect performance data for determine VM sizing View the Windows Azure Capacity results and report Perform an inventory: 1. To perform an inventory against a single machine or across a complete environment, choose Perform an Inventory to launch the Inventory and Assessment Wizard as shown below: 2. After the Inventory and Assessment Wizard launches, select either the Windows computers or SQL Server scenario to inventory Windows machines. HINT: If you don’t care about completely inventorying a machine, just select the SQL Server scenario. Click Next to Continue. 3. On the Discovery Methods page, select how you want to discover computers and then click Next to continue. Description of Discovery Methods: Use Active Directory Domain Services -- This method allows you to query a domain controller via the Lightweight Directory Access Protocol (LDAP) and select computers in all or specific domains, containers, or OUs. Use this method if all computers and devices are in AD DS. Windows networking protocols --  This method uses the WIN32 LAN Manager application programming interfaces to query the Computer Browser service for computers in workgroups and Windows NT 4.0–based domains. If the computers on the network are not joined to an Active Directory domain, use only the Windows networking protocols option to find computers. System Center Configuration Manager (SCCM) -- This method enables you to inventory computers managed by System Center Configuration Manager (SCCM). You need to provide credentials to the System Center Configuration Manager server in order to inventory the managed computers. When you select this option, the MAP Toolkit will query SCCM for a list of computers and then MAP will connect to these computers. Scan an IP address range -- This method allows you to specify the starting address and ending address of an IP address range. The wizard will then scan all IP addresses in the range and inventory only those computers. Note: This option can perform poorly, if many IP addresses aren’t being used within the range. Manually enter computer names and credentials -- Use this method if you want to inventory a small number of specific computers. Import computer names from a files -- Using this method, you can create a text file with a list of computer names that will be inventoried. 4. On the All Computers Credentials page, enter the accounts that have administrator rights to connect to the discovered machines. This does not need to a domain account, but needs to be a local administrator. I have entered my domain account that is an administrator on my local machine. Click Next after one or more accounts have been added. NOTE: The MAP Toolkit primarily uses Windows Management Instrumentation (WMI) to collect hardware, device, and software information from the remote computers. In order for the MAP Toolkit to successfully connect and inventory computers in your environment, you have to configure your machines to inventory through WMI and also allow your firewall to enable remote access through WMI. The MAP Toolkit also requires remote registry access for certain assessments. In addition to enabling WMI, you need accounts with administrative privileges to access desktops and servers in your environment. 5. On the Credentials Order page, select the order in which want the MAP Toolkit to connect to the machine and SQL Server. Generally just accept the defaults and click Next. 6. On the Enter Computers Manually page, click Create to pull up at dialog to enter one or more computer names. 7. On the Summary page confirm your settings and then click Finish. After clicking Finish the inventory process will start, as shown below: Windows Azure Readiness results and report After the inventory progress has completed, you can review the results under the Database scenario. On the tile, you will see the number of Windows Server machine with SQL Server that were analyzed, the number of machines that are ready to move without changes and the number of machines that require further changes. If you click this Azure VM Readiness tile, you will see additional details and can generate the Windows Azure VM Readiness Report. After the report is generated, select View | Saved Reports and Proposals to view the location of the report. Open up WindowsAzureVMReadiness* report in Excel. On the Windows tab, you can see the results of the assessment. This report has a column for the Operating System and SQL Server assessment and provides a recommendation on how to resolve, if there a component is not supported. Collect Performance Data Launch the Performance Wizard to collect performance information for the Windows Server machines that you would like the MAP Toolkit to suggest a Windows Azure VM size for. Windows Azure Capacity results and report After the performance metrics are collected, the Azure VM Capacity title will display the number of Virtual Machine sizes that are suggested for the Windows Server and Linux machines that were analyzed. You can then click on the Azure VM Capacity tile to see the capacity details and generate the Windows Azure VM Capacity Report. Within this report, you can view the performance data that was collected and the Virtual Machine sizes.   MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Useful References: Windows Azure Homepage How to guides for Windows Azure Virtual Machines Provisioning a SQL Server Virtual Machine on Windows Azure Windows Azure Pricing     Peter Saddow Senior Program Manager – MAP Toolkit Team

  Read the article

• The Shift: how Orchard painlessly shifted to document storage, and how it’ll affect you

  - by Bertrand Le Roy

  We’ve known it all along. The storage for Orchard content items would be much more efficient using a document database than a relational one. Orchard content items are composed of parts that serialize naturally into infoset kinds of documents. Storing them as relational data like we’ve done so far was unnatural and requires the data for a single item to span multiple tables, related through 1-1 relationships. This means lots of joins in queries, and a great potential for Select N+1 problems. Document databases, unfortunately, are still a tough sell in many places that prefer the more familiar relational model. Being able to x-copy Orchard to hosters has also been a basic constraint in the design of Orchard. Combine those with the necessity at the time to run in medium trust, and with license compatibility issues, and you’ll find yourself with very few reasonable choices. So we went, a little reluctantly, for relational SQL stores, with the dream of one day transitioning to document storage. We have played for a while with the idea of building our own document storage on top of SQL databases, and Sébastien implemented something more than decent along those lines, but we had a better way all along that we didn’t notice until recently… In Orchard, there are fields, which are named properties that you can add dynamically to a content part. Because they are so dynamic, we have been storing them as XML into a column on the main content item table. This infoset storage and its associated API are fairly generic, but were only used for fields. The breakthrough was when Sébastien realized how this existing storage could give us the advantages of document storage with minimal changes, while continuing to use relational databases as the substrate. public bool CommercialPrices { get { return this.Retrieve(p => p.CommercialPrices); } set { this.Store(p => p.CommercialPrices, value); } } This code is very compact and efficient because the API can infer from the expression what the type and name of the property are. It is then able to do the proper conversions for you. For this code to work in a content part, there is no need for a record at all. This is particularly nice for site settings: one query on one table and you get everything you need. This shows how the existing infoset solves the data storage problem, but you still need to query. Well, for those properties that need to be filtered and sorted on, you can still use the current record-based relational system. This of course continues to work. We do however provide APIs that make it trivial to store into both record properties and the infoset storage in one operation: public double Price { get { return Retrieve(r => r.Price); } set { Store(r => r.Price, value); } } This code looks strikingly similar to the non-record case above. The difference is that it will manage both the infoset and the record-based storages. The call to the Store method will send the data in both places, keeping them in sync. The call to the Retrieve method does something even cooler: if the property you’re looking for exists in the infoset, it will return it, but if it doesn’t, it will automatically look into the record for it. And if that wasn’t cool enough, it will take that value from the record and store it into the infoset for the next time it’s required. This means that your data will start automagically migrating to infoset storage just by virtue of using the code above instead of the usual: public double Price { get { return Record.Price; } set { Record.Price = value; } } As your users browse the site, it will get faster and faster as Select N+1 issues will optimize themselves away. If you preferred, you could still have explicit migration code, but it really shouldn’t be necessary most of the time. If you do already have code using QueryHints to mitigate Select N+1 issues, you might want to reconsider those, as with the new system, you’ll want to avoid joins that you don’t need for filtering or sorting, further optimizing your queries. There are some rare cases where the storage of the property must be handled differently. Check out this string[] property on SearchSettingsPart for example: public string[] SearchedFields { get { return (Retrieve<string>("SearchedFields") ?? "") .Split(new[] {',', ' '}, StringSplitOptions.RemoveEmptyEntries); } set { Store("SearchedFields", String.Join(", ", value)); } } The array of strings is transformed by the property accessors into and from a comma-separated list stored in a string. The Retrieve and Store overloads used in this case are lower-level versions that explicitly specify the type and name of the attribute to retrieve or store. You may be wondering what this means for code or operations that look directly at the database tables instead of going through the new infoset APIs. Even if there is a record, the infoset version of the property will win if it exists, so it is necessary to keep the infoset up-to-date. It’s not very complicated, but definitely something to keep in mind. Here is what a product record looks like in Nwazet.Commerce for example: And here is the same data in the infoset: The infoset is stored in Orchard_Framework_ContentItemRecord or Orchard_Framework_ContentItemVersionRecord, depending on whether the content type is versionable or not. A good way to find what you’re looking for is to inspect the record table first, as it’s usually easier to read, and then get the item record of the same id. Here is the detailed XML document for this product: <Data> <ProductPart Inventory="40" Price="18" Sku="pi-camera-box" OutOfStockMessage="" AllowBackOrder="false" Weight="0.2" Size="" ShippingCost="null" IsDigital="false" /> <ProductAttributesPart Attributes="" /> <AutoroutePart DisplayAlias="camera-box" /> <TitlePart Title="Nwazet Pi Camera Box" /> <BodyPart Text="[...]" /> <CommonPart CreatedUtc="2013-09-10T00:39:00Z" PublishedUtc="2013-09-14T01:07:47Z" /> </Data> The data is neatly organized under each part. It is easy to see how that document is all you need to know about that content item, all in one table. If you want to modify that data directly in the database, you should be careful to do it in both the record table and the infoset in the content item record. In this configuration, the record is now nothing more than an index, and will only be used for sorting and filtering. Of course, it’s perfectly fine to mix record-backed properties and record-less properties on the same part. It really depends what you think must be sorted and filtered on. In turn, this potentially simplifies migrations considerably. So here it is, the great shift of Orchard to document storage, something that Orchard has been designed for all along, and that we were able to implement with a satisfying and surprising economy of resources. Expect this code to make its way into the 1.8 version of Orchard when that’s available.

  Read the article

• Using native MySQL driver in Erlang

  - by Mickey Shine

  I am using native MySQL driver (http://code.google.com/p/erlang-mysql-driver/) with mochiweb. When I tried that MySQL driver in shell mode, all woked fine. But when I write some code with Mochiweb, it reported me the following error: =CRASH REPORT==== 4-Jul-2009::04:44:29 === crasher: initial call: mochiweb_socket_server:acceptor_loop/1 pid: <0.61.0> registered_name: [] exception error: no function clause matching mysql:fetch(p1,<<"SELECT * FROM cdb_forums LIMIT 10">>) in function perly_web:loop/2 in call from mochiweb_http:headers/5 ancestors: [perly_web,perly_sup,<0.58.0>] messages: [] links: [<0.60.0>,#Port<0.965>] dictionary: [{mochiweb_request_body,undefined}, {mochiweb_request_qs,[]}, {mochiweb_request_post,[]}, {mochiweb_request_path,"/online"}, {mochiweb_request_cookie, [{"04c_sid","hG9Oyv"}, {"04c_visitedfid","2"}, {"kQx_cookietime","2592000"}, {"kQx_loginuser","admin"}, {"kQx_activationauth", "98b3mdX86fKT9dI4WyKuL61Tqxk%2BW1r6ACpHp9y8itH2xQ"}, {"smile","1D1"}]}] trap_exit: false status: running heap_size: 1597 stack_size: 24 reductions: 5188 neighbours: The code I write in Mochiweb is start(Options) -> {DocRoot, Options1} = get_option(docroot, Options), Loop = fun (Req) -> ?MODULE:loop(Req, DocRoot) end, % we’ll set our maximum to 1 million connections. (default: 2048) mochiweb_http:start([{max, 1000000}, {name, ?MODULE}, {loop, Loop} | Options1]), mysql:start_link(p1, "10.0.0.123", "root", "root", "test"). stop() -> mochiweb_http:stop(?MODULE). loop(Req, DocRoot) -> "/" ++ Path = Req:get(path), case Req:get(method) of Method when Method =:= 'GET'; Method =:= 'HEAD' -> case Path of "online" -> Result1 = mysql:fetch(p1, <<"SELECT * FROM cdb_forums LIMIT 10">>), Body1 = io:format("Result1: ~p~n", [Result1]), Req:ok({"text/plain", Body1}); The connection looks good but when I added Result1 = mysql:fetch(p1, <<"SELECT * FROM cdb_forums LIMIT 10">>), it crashed. Can someone help me? Thanks in advance~ //================================================== updated: I noticed the follwoing information. If that is correct? =PROGRESS REPORT==== 4-Jul-2009::05:49:32 === supervisor: {local,kernel_safe_sup} started: [{pid,<0.65.0>}, {name,inet_gethost_native_sup}, {mfa,{inet_gethost_native,start_link,[]}}, {restart_type,temporary}, {shutdown,1000}, {child_type,worker}] mysql_conn: greeting version "5.1.33-log" (protocol 10) salt "ne0_m'vA" caps 63487 serverchar <<8,2,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0>> salt2 "!|o;vabJ*4bt" mysql_auth send packet 1: <<5,162,0,0,64,66,15,0,8,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,114,111,111,116,0,20,52,235,78, 173,36,251,201,242,172,139,113,231,253,181,245,3, 91,198,111,135>> Link: {ok,<0.62.0>} =SUPERVISOR REPORT==== 4-Jul-2009::05:49:32 === Supervisor: {local,perly_sup} Context: start_error Reason: ok Offender: [{pid,undefined}, {name,perly_web}, {mfa, {perly_web,start, [[{ip,"0.0.0.0"}, {port,8000}, {docroot, "/work/mochiweb-read-only/scripts/perly/priv/www"}]]}}, {restart_type,permanent}, {shutdown,5000}, {child_type,worker}]

  Read the article

• SVN: Create a dump file of a folder

  - by DarkJaff

  I'm trying to create a dump file of a folder in my SVN repository.(My goal is to import this dump on another repository, but that's another story). I've read like 20 pages about this and they all tell me to use svndumpfilter but I can't seem to make it work. Here is my command: C:\>svnadmin dump d:/SvnData/TestingSVN/ | svndumpfilter include /TestingSVN/Trunk/Fms/ > d:\FMS.txt The output in the command line is this strange thing: Including prefixes: '/TestingSVN/Trunk/Fms' * Dumped revision 0. Revision 0 com*m iDtutmepde da sr e0v.isi n 1. Revision 1 committed as 1. * Dumped revision 2. Revision 2 committed a*s D2u.mpe revision 3. Revisio*n D3u mcpoemdm irtetveids iaosn 34.. Revision* 4D ucmopmemdi trteevdi saiso n4 .5. Revision 5 com*m iDtutmepde da sr e5v.isi n 6. Revision 6 commi*t tDeudm paesd 6r.evi ion 7. Revisio*n D7u mcpoemdm irtetveids iaosn 78.. Revision *8 Dcuommpmeidt treedv iassi o8n. 9. Revision 9* cDoummmpietdt erde vaiss i9o.n 1 . Revisi*o nD u1m0p ecdo mrmeivtitseido na s1 11.0 . Revision 11 *c oDmummiptetde dr eavsi s1i1o.n 1 . Revision 12 committed* aDsu m1p2e.d r vision 13. Revision 13 committ*e dD uamsp e1d3 .rev sion 14. Revision 14 commit*t eDdu mapse d1 4r.evi ion 15. Revision 15 committed as 15. * Dumped revision 16. Revision 16 committed as 16. Dropped 83 nodes: '/Branches' '/Branches/305' '/Branches/305/New Text Document.txt' '/Fms' '/Fms/ADPropertySheet.cpp'** etc. for 83 nodes... Also, the dump file itself is only 3 kb and contain no real data, only things like that (this is not the complete dump, just a sample) SVN-fs-dump-format-version: 2 UUID: 592fc9f0-5994-e841-a4dc-653714c95216 Revision-number: 0 Prop-content-length: 56 Content-length: 56 K 8 svn:date V 27 2009-06-19T15:05:52.001352Z PROPS-END Revision-number: 1 Prop-content-length: 112 Content-length: 112 K 7 svn:log V 38 This is an empty revision for padding. K 8 svn:date V 27 2009-06-19T15:11:29.378511Z PROPS-END Can anybody help me sort this out?

  Read the article

• Converting projects to use Automatic NuGet restore

  - by terje

  Originally posted on: http://geekswithblogs.net/terje/archive/2014/06/11/converting-projects-to-use-automatic-nuget-restore.aspxDownload tool In version 2.7 of NuGet automatic nuget restore was introduced, meaning you no longer need to distort your msbuild project files with nuget target information.   Visual Studio and TFS 2013 build have this enabled by default.  However, if your project was created before this was introduced, and/or if you have used the “Enable NuGet Package Restore” afterwards, you now have a series of unwanted things in your projects, and a series of project files that have been modified – and – you no longer neither want nor need this !  You might also get into some unwanted issues due to these modifications.  This is a MSBuild modification that was needed only before NuGet 2.7 ! So: DON’T USE THIS FUNCTION !!! There is an issue https://nuget.codeplex.com/workitem/4019 on this on the NuGet project site to get this function removed, renamed or at least moved farther away from the top level (please help vote it up!).  The response seems to be that it WILL BE removed, around version 3.0. This function does nothing you need after the introduction of NuGet 2.7.  What is also unfortunate is the naming of it – it implies that it is needed, it is not, and what is worse, there is no corresponding function to remove what it does ! So to fix this use the tool named IFix, that will fix this issue for you   - all free of course, and the code is open source.  Also report issues there:  https://github.com/OsirisTerje/IFix    IFix information DOWNLOAD HERE This command line tool installs using an MSI, and add itself to the system path.  If you work in a team, you will probably need to use the  tool multiple times.  Anyone in the team may at any time use the “Enable NuGet Package Restore” function and mess up your project again.  The IFix program can be run either in a  check modus, where it does not write anything back – it only checks if you have any issues, or in a Fix mode, where it will also perform the necessary fixes for you. The IFix program is used like this: IFix <command> [-c/--check] [-f/--fix]  [-v/--verbose] The command in this case is “nugetrestore”.  It will do a check from the location where it is being called, and run through all subfolders from that location. So  “IFix nugetrestore  --check” , will do the check ,  and “IFix nugetrestore  --fix”  will perform the changes, for all files and folders below the current working directory. (Note that --check  can be replaced with only –c, and --fix with –f, and so on. ) BEWARE: When you run the fix option, all solutions to be affected must be closed in Visual Studio ! So, if you just want to DO it, then: IFix nugetrestore --check to see if you have issues then IFix nugetrestore  --fix to fix them. How does it work IFix nugetrestore  checks and optionally fixes four issues that the older enabling of nuget restore did.  The issues are related to the MSBuild projess, and are: Deleting the nuget.targets file. Deleting the nuget.exe that is located under the .nuget folder Removing all references to nuget.targets in the solution file Removing all properties and target imports of nuget.targets inside the csproj files. IFix fixes these issues in the same sequence. The first step, removing the nuget.targets file is the most critical one, and all instances of the nuget.targets file within the scope of a solution has to be removed, and in addition it has to be done with the solution closed in Visual Studio.  If Visual Studio finds a nuget.targets file, the csproj files will be automatically messed up again. This means the removal process above might need to be done multiple times, specially when you’re working with a team, and that solution context menu still has the “Enable NuGet Package Restore” function.  Someone on the team might inadvertently do this at any time. It can be a good idea to add this check to a checkin policy – if you run TFS standard version control, but that will have no effect if you use TFS Git version control of course. So, better be prepared to run the IFix check from time to time. Or, even better, install IFix on your build servers, and add a call to IFix nugetrestore --check in the TFS Build script.    How does it look As a first example I have run the IFix program from the top of a set of git repositories, so it spans multiple repositories with multiple solutions. The result from the check option is as follows: We see the four red lines, there is one for each of the four checks we talked about in the previous section. The fact that they are red, means we have that particular issue. The first section (above the first red text line) is the nuget targets section.  Notice  No.1, it says it has found no paths to copy.  What IFix does here is to check if there are any defined paths to other nuget galleries.  If there are, then those are copied over to the nuget.config file, where is where it should be in version 2.7 and above.   No.2 says it has found the particular nuget.targets file,  No.3  states it HAS found some other nuget galleries defines in the targets file, which then it would like to copy to the config.file. No.4 is the section for nuget.exe files, and list those it has found, and which it would like to delete. No 5 states it has found a reference to nuget.targets in the solution file.  This reference comes from the fact that the .nuget folder is a solution folder, and the items within are described in the solution file. It then checks the csproj files, and as can be seen from the last red line, it ha found issues in 96 out of 198 csproj files.  There are two possible issues in a csproj files.  No.6 is the first one, and the most common and most important one, an “Import project” section.  This is the section that calls the nuget.targets files.  No.7 is another issue, which seems to sometimes be there, sometimes not, it is a RestorePackages property, which also should go away. Now, if we run the IFix nugetrestore –fix command, and then the check again after that, the result is: All green !

  Read the article

• Form won't submit properly in IE

  - by VUELA

  Hi! My simple donation form submits properly except for Internet Explorer. I'm sure it has to do with issues with change() and focus() or blur(), but all my hundreds of attempts so far have failed me. I tried using .click() instead of change() as mentioned in this post:http://stackoverflow.com/questions/208471/getting-jquery-to-recognise-change-in-ie (and elsewhere), but I could not get it to work! ... so I am overlooking something simple perhaps. Any help is greatly appreciated!! Here is the link to the page: http://www.wsda.org/donate HTML FORM: <form id="donationForm" method="post" action="https://wsda.foxycart.com/cart.php" class="foxycart"> <input type="hidden" id="name" name="name" value="Donation" /> <input type="hidden" id="price" name="price" value="10" /> <div class="row"> <label for="price_select">How much would you like to donate?</label> <select id="price_select" name="price_select"> <option value="10">$10</option> <option value="20">$20</option> <option value="50">$50</option> <option value="100">$100</option> <option value="300">$300</option> <option value="0">Other</option> </select> </div> <div class="row" id="custom_amount"> <label for="price_input">Please enter an amount: $</label> <input type="text" id="price_input" name="price_select" value="" /> </div> <input type="submit" id="DonateBtn" value="Submit Donation »" /> </form> JQUERY: // donation form $("#custom_amount").hide(); $("#price_select").change(function(){ if ($("#price_select").val() == "0") { $("#custom_amount").show(); } else { $("#custom_amount").hide(); } $("#price").val($("#price_select").val()); }); $("#price_input").change(function(){ $("#price").val($("#price_input").val()); });

  Read the article

• Populating ComboBoxDataColumn items and values

  - by MarceloRamires

  I have a "populate combobox", and I'm so happy with it that I've even started using more comboboxes. It takes the combobox object by reference with the ID of the "value set" (or whatever you want to call it) from a table and adds the items and their respective values (which differ) and does the job. I've recently had the brilliant idea of using comboboxes in a gridview, and I was happy to notice that it worked JUST LIKE a single combobox, but populating all the comboboxes in the given column at the same time. ObjComboBox.Items.Add("yadayada"); //works just like ObjComboBoxColumn.Items.Add("blablabla"); But When I started planning how to populate these comboboxes I've noticed: There's no "Values" property in ComboBoxDataColumn. ObjComboBox.Values = whateverArray; //works, but the following doesn't ObjComboBoxColumn.Values = whateverArray; Questions: 0 - How do I populate it's values ? (I suspect it's just as simple, but uses another name) 1 - If it works just like a combobox, what's the explanation for not having this attribute ? -----[EDIT]------ So I've checked out Charles' quote, and I've figured I had to change my way of populating these bad boys. Instead of looping through the strings and inserting them one by one in the combobox, I should grab the fields I want to populate in a table, and set one column of the table as the "value", and other one as the "display". So I've done this: ObjComboBoxColumn.DataSource = DTConfig; //Double checked, guaranteed to be populated ObjComboBoxColumn.ValueMember = "Code"; ObjComboBoxColumn.DisplayMember = "Description"; But nothing happens, if I use the same object as so: ObjComboBoxColumn.Items.Add("StackOverflow"); It is added. There is no DataBind() function. It finds the two columns, and that's guaranteed ("Code" and "Description") and if I change their names to nonexistant ones it gives me an exception, so that's a good sign. -----[EDIT]------ I have a table in SQL Server that is something like code  |  text —————    1    | foo    2    | bar It's simple, and with other comboboxes (outside of gridviews) i've successfully populated looping through the rows and adding the texts: ObjComboBox.Items.Add(MyDataTable.Rows[I]["MyColumnName"].ToString()); And getting every value, adding it into an array, and setting it like: ObjComboBox.Values = MyArray; I'd like to populate my comboboxColumns just as simply as I do with comboboxes.

  Read the article

• Cascade Saves with Fluent NHibernate AutoMapping - Old Anwser Still Valid?

  - by Glenn

  I want to do exactly what this question asks: http://stackoverflow.com/questions/586888/cascade-saves-with-fluent-nhibernate-automapping Using Fluent Nhibernate Mappings to turn on "cascade" globally once for all classes and relation types using one call rather than setting it for each mapping individually. The answer to the earlier question looks great, but I'm afraid that the Fluent Nhibernate API altered its .WithConvention syntax last year and broke the answer... either that or I'm missing something. I keep getting a bunch of name space not found errors relating to the IOneToOnePart, IManyToOnePart and all their variations: "The type or namespace name 'IOneToOnePart' could not be found (are you missing a using directive or an assembly reference?)" I've tried the official example dll's, the RTM dll's and the latest build and none of them seem to make VS 2008 see the required namespace. The second problem is that I want to use the class with my AutoPersistenceModel but I'm not sure where to this line: .ConventionDiscovery.AddFromAssemblyOf() in my factory creation method. private static ISessionFactory CreateSessionFactory() { return Fluently.Configure() .Database(SQLiteConfiguration.Standard.UsingFile(DbFile)) .Mappings(m => m.AutoMappings .Add(AutoMap.AssemblyOf<Shelf>(type => type.Namespace.EndsWith("Entities")) .Override<Shelf>(map => { map.HasManyToMany(x => x.Products).Cascade.All(); }) ) )//emd mappings .ExposeConfiguration(BuildSchema) .BuildSessionFactory();//finalizes the whole thing to send back. } Below is the class and using statements I'm trying using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.IO; using FluentNHibernate.Conventions; using FluentNHibernate.Cfg; using FluentNHibernate.Cfg.Db; using NHibernate; using NHibernate.Cfg; using NHibernate.Tool.hbm2ddl; using FluentNHibernate.Mapping; namespace TestCode { public class CascadeAll : IHasOneConvention, IHasManyConvention, IReferenceConvention { public bool Accept(IOneToOnePart target) { return true; } public void Apply(IOneToOnePart target) { target.Cascade.All(); } public bool Accept(IOneToManyPart target) { return true; } public void Apply(IOneToManyPart target) { target.Cascade.All(); } public bool Accept(IManyToOnePart target) { return true; } public void Apply(IManyToOnePart target) { target.Cascade.All(); } } }

  Read the article

• Error: java.security.AccessControlException: Access denied

  - by RMD

  Hi, I have to connect to a https url with username and password to read a file. I am not able to connect to the server (see the error log below). I do not have much java experience so I need help with this code. I would really appreciate some help to solve this! Thank you. Raquel CODE: import lotus.domino.; import java.net.; import java.io.*; import javax.net.ssl.HttpsURLConnection; public class JavaAgent extends AgentBase { public void NotesMain() { try { String username = "123"; String password = "456"; String input = username + ":" + password; String encoding = new sun.misc.BASE64Encoder().encode (input.getBytes()); //Open the URL and read the text into a Buffer String urlName = "https://server.org/Export.mvc/GetMeetings?modifiedSince=4/9/2010"; URL url = new URL(urlName); HttpsURLConnection connection = (HttpsURLConnection)url.openConnection(); connection.setRequestMethod("POST"); connection.setRequestProperty("Content-Type", "application/x-www-form-urlencoded"); connection.setRequestProperty("Content-Length", String.valueOf (encoding.length())); connection.setUseCaches(false); connection.setDoInput(true); connection.setDoOutput(true); connection.setAllowUserInteraction(true); connection.setRequestProperty("Authorization", "Basic " + encoding); connection.setRequestProperty("Cookie", "LocationCode=Geneva"); connection.connect(); BufferedReader rd = null; try{ rd = new BufferedReader(new InputStreamReader(connection.getInputStream())); } catch (IOException e) { System.out.println("Read failed"); System.exit(-1); } String line; while((line = rd.readLine()) != null) { System.out.println(line.toString()); } rd.close(); connection.disconnect(); } catch(Exception e) { e.printStackTrace(); } } } LOG: java.security.AccessControlException: Access denied (java.lang.RuntimePermission exitVM.-1) at java.security.AccessController.checkPermission(AccessController.java:108) at java.lang.SecurityManager.checkPermission(SecurityManager.java:532) at COM.ibm.JEmpower.applet.AppletSecurity.superDotCheckPermission(AppletSecurity.java:1449) at COM.ibm.JEmpower.applet.AppletSecurity.checkRuntimePermission(AppletSecurity.java:1311) at COM.ibm.JEmpower.applet.AppletSecurity.checkPermission(AppletSecurity.java:1611) at COM.ibm.JEmpower.applet.AppletSecurity.checkPermission(AppletSecurity.java:1464) at java.lang.SecurityManager.checkExit(SecurityManager.java:744) at java.lang.Runtime.exit(Runtime.java:99) at java.lang.System.exit(System.java:275) at JavaAgent.NotesMain(Unknown Source) at lotus.domino.AgentBase.runNotes(Unknown Source) at lotus.domino.NotesThread.run(Unknown Source)

  Read the article

• EditText doesn't fill the whole height of the window

  - by user565447

  EditText doesn't fill the whole height of the window. Here is the code: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/LinearLayout01" android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="vertical"> <LinearLayout android:id="@+id/LinearLayout02" android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="horizontal" > <Button android:id="@+id/bItalic" android:layout_width="wrap_content" android:layout_height="wrap_content" ></Button> <Button android:id="@+id/bBold" android:layout_width="wrap_content" android:layout_height="wrap_content" /> <Button android:id="@+id/bUnderline" android:layout_width="wrap_content" android:layout_height="wrap_content" /> <Button android:id="@+id/bStrike" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="S" /> <Button android:id="@+id/bSub" android:layout_width="wrap_content" android:layout_height="wrap_content" /> <Button android:id="@+id/bSup" android:layout_width="wrap_content" android:layout_height="wrap_content" /> <ImageButton android:id="@+id/bInsertImage" android:src="@drawable/insertimage" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <ImageButton android:id="@+id/bInsertTable" android:src="@drawable/table" android:layout_width="wrap_content" android:layout_height="wrap_content"/> </LinearLayout> <FrameLayout android:id="@+id/FrameLayout02" android:layout_height="fill_parent" android:layout_width="fill_parent" > <TabHost android:id="@+id/tabhost" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TabWidget android:id="@android:id/tabs" android:layout_width="fill_parent" android:layout_height="fill_parent" /> <FrameLayout android:id="@android:id/tabcontent" android:layout_width="fill_parent" android:layout_height="fill_parent" android:paddingTop="62px"> <ScrollView android:id="@+id/scroll01" android:layout_width="fill_parent" android:layout_height="fill_parent"> <HorizontalScrollView android:id="@+id/scroll_hor01" android:layout_width="fill_parent" android:layout_height="fill_parent"> <EditText android:id="@+id/VisualPane" android:layout_width="fill_parent" android:layout_height="fill_parent" /> </HorizontalScrollView> </ScrollView> <ScrollView android:id="@+id/scroll02" android:layout_width="fill_parent" android:layout_height="fill_parent"> <HorizontalScrollView android:id="@+id/scroll_hor02" android:layout_width="fill_parent" android:layout_height="fill_parent"> <EditText android:id="@+id/HTMLPane" android:layout_width="fill_parent" android:layout_height="fill_parent" /> </HorizontalScrollView> </ScrollView> </FrameLayout> </TabHost> </FrameLayout> </LinearLayout> Here is a screenshot: Why doesn't EditText fill the whole height of the window?

  Read the article

• CodePlex Daily Summary for Tuesday, March 23, 2010

  CodePlex Daily Summary for Tuesday, March 23, 2010New Projects.NET StarCraft II Replay Parser: A .NET 3.5 Library used to parse StarCraft II replays. Developed in C# 3.5.BackToBasics "B2B" Chat: With technology and software getting more and more complicated, why not get back to basics with BackToBasicsChat. B2B allows you to chat over a ser...Dark Neuron Game Engine: Dark Neuron allows you to easily create fun and interesting games with no need of developing basic game components. This engine is developed for C#...DeepZoom Pivot Constructor: Library to make building DeepZoom images and Pivot displays simpler.ePaper reader: The project is aimed at creating a tool which helps in reading electronic editions of news papers(pdf/flash)FSharpPageProvider for EPiServer CMS 6: This project starts as the port of EPiServer XmlPageProvider to F# programming language. Hammock for REST: Hammock is a REST library for .NET that greatly simplifies consuming and wrapping RESTful services.Kirill Osenkov: Various small projects, tools, utilities and samples by Kirill OsenkovliveDB: liveDB - web client for sql serverLucilla Framework: lucilla frameworkMVC Foolproof Validation: MVC Foolproof Validation aims to extend the Data Annotation validation provided in ASP.NET MVC. Initial efforts are focused on adding contingent va...MVC2Forums: MVC2Forums is simply a forum system based upon MVC2.Mvvm Foundation Silverlight: Mvvm Foundation Silverlight is a library of classes that are helpful when building Silverlight applications based in the MVVM pattern. This librar...MyPersonalWebsite: This is my personal web site developed using ASP.NET MVC 2Planner: Planner makes it easier for all peoples to plan your tasks. It's developed in Delphi.Prose: Prose is an playground for an experimental JavaScript like language compiler. Eventually it will implement 0-CFA, CFA2, and a Tracing JITQuestTracker: QuestTracker is a todo list presented in the format of a quest tracking list such as the one in World of Warcraft.SevenZipLib: SevenZipLib is a C# interface to the 7-zip library.SimpleGeo .Net: .Net Client library for the SimpleGeo.com serviceNew ReleasesAutenticar no OpenLDAP utilizando pGIna: DLL LDAPAuth Plus: New Group: No LoginBMap.NET: BMap.NET 2: This is the 2nd version of BMap.NET. It has included these tags: Bing Maps, and "About BMap.NET".Cronos: Version 2.04: This is primarily a bug-fix release. Several numerical issues have been resolved, and a resource leak (of MS Windows graphics objects) has been fi...EV Dashboard: v1.0: This release includes support for an App.config file and Auto Connect, which will connect to the specified BMS at startup. Note: You still have to ...GKO Libraries: GKO Libraries 0.1 Beta: 0.1 Beta Added More utilities and functions RefactoringsGLB Virtual Player Builder: 0.4.2 Beta: Beta build that includes a new player creator.HKGolden Express: HKGoldenExpress (Build 201003222215): New features: (None) Bug fix: Fixed bugs of unable to parse XML file stream returned from HKGolden API, as the encoding of XML file stream chang...jQuery Web Controls ASP.Net: jQueryWebControls 1.1.1.2: En esta versión se han corregido problemas existentes en la ejecución de los scripts de jquery cuando se utilizaban MasterPage y/o Ajax Control Too...LightKit: Version 0.2.2: Fixed: fixed bug when CollectionItemsEditor ditermines IsChanged property incorrectly fixed ObjectEditor`a thisstring propertyName method wrong l...LINQ to Twitter: LINQ to Twitter Beta v2.0.8: New items added since v1.1 include: Support for OAuth (via DotNetOpenAuth), secure communication via https, VB language support, serialization of ...MapWindow6: MapWindow 6.0 msi (March 22): This version fixes the icons for the desktop installer and changes the install directory to Program Files\MapWindow instead of Program Files\ISU.Math.NET Numerics: 2010.3.22.1334 Build: Latest alpha buildMiniCalendar Web Part: MiniCalendar Web Part 1.8: A small web part to display links to events stored in a list (or document library) in a mini calendar (in month view mode). It shows tooltips for t...OCInject: Release Two: This release brings some missing features such as Singleton support, Func<T> factories and child containers. It, also, has an updated constructor ...Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (March 2010): Installer of the latest binaries of Phalanger 2.0 (March 2010) and its integration into Visual Studio 2008. Easy installer with automatic IIS int...Planner: Planner: firstQuestTracker: QuestTracker 0.1: This is the preliminary release of QuestTracker. There's not much documentation or many features yet, but it is functional. Any feedback would be a...QuestTracker: QuestTracker 0.1.1: Bugfix for QuestTracker 0.1QuestTracker: QuestTracker 0.1.2: Fixes an issue with saving the quest list.Rawr: Rawr 2.3.13: We're pleased to announce that, after long last, Rawr3 has entered public beta. You're still welcome to continue using Rawr2 (that's what you're re...Single Web Session: Alpha Model Plugin: !How to use Single Web Session add following line into your web config <httpModules> <add name="SingleSession" type="SingleWebSession.Model.W...SMIL - SharePoint Map Integration Layer: SMIL 1.0: Custom data field Extracts Lat/Lon from EXIF from images being uploaded. Map Web Part Filter with SharePoint views Filter by connecting to...sTASKedit: sTASKedit 42532 (Developer Alpha): This release is only to verify the currently decoded task structure... Supported files: tasks.data (v1.3.6 client)VCC: Latest build, v2.1.30322.0: Automatic drop of latest buildVisual Studio DSite: Advanced Notepad (Visual C++ 2008): An notepad written in c that can save in a rich text file format.Wallpaper Rotator: Wallpaper Rotator 0.5: Wallpaper Rotator 0.5 This version includes the following improvements: Saving the choice of "Random Order (Shuffle Mode)" Updating the configu...Most Popular ProjectsMetaSharpRawrWBFS ManagerSilverlight ToolkitASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBlogEngine.NETLINQ to TwitterPHPExcelFarseer Physics EngineFacebook Developer ToolkitNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices: Composite WPF and SilverlightN2 CMS

  Read the article

• PHP/Java Bridge java.lang.NoSuchMethodException

  - by m1sk

  I have setup PHP/Java Bridge with working examples in netbeans tomcat directory. What doesnt work is using custom JAR Here is my code: package com.micha; public class Hello1Bean { public Hello1Bean() {} String hi() {return "This is my hello message";} String hello(String name) {return "Hello" + name;} } And the php code <!DOCTYPE html> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <title></title> </head> <body> <?php require_once ("java/Java.inc"); $world = new Java("com.micha.Hello1Bean"); echo java_values($world->hi()); echo "Hello Working Thingy\n\n"; ?> </body> </html> When I check http://localhost:8084/JavaBridge/mytest.php: javax.servlet.ServletException: java.lang.RuntimeException: PHP Fatal error: Uncaught [[o:Exception]:"java.lang.Exception: Invoke failed: [[o:Hello1Bean]]->hi. Cause: java.lang.NoSuchMethodException: hi(). Candidates: [] VM: 1.6.0_25@http://java.sun.com/" at: #-6 php.java.bridge.JavaBridge.checkM(JavaBridge.java:1085) #-5 php.java.bridge.JavaBridge.Invoke(JavaBridge.java:1024) #-4 php.java.bridge.Request.handleRequest(Request.java:417) #-3 php.java.bridge.Request.handleRequests(Request.java:500) #-2 php.java.bridge.http.ContextRunner.run(ContextRunner.java:145) #-1 php.java.bridge.ThreadPool$Delegate.run(ThreadPool.java:60) #0 C:\Users\Micha\.netbeans\7.1.2\apache-tomcat-7.0.22.0_base\webapps\JavaBridge\java\Java.inc(232): java_ThrowExceptionProxyFactory->getProxy(2, 'com.micha.Hello...', 'T', true) #1 C:\Users\Micha\.netbeans\7.1.2\apache-tomcat-7.0.22.0_base\webapps\JavaBridge\java\Java.inc(360): java_Arg->getResult(true) #2 C:\Users\Micha\.netbeans\7.1.2\apache-tomcat-7.0.22.0_base\webapps\JavaBridge\java\Java.inc(366): java_Client->getWrappedResult(true) #3 C:\Users\Micha\.netbean in C:\Users\Micha\.netbeans\7.1.2\apache-tomcat-7.0.22.0_base\webapps\JavaBridge\java\Java.inc on line 195 php.java.servlet.fastcgi.FastCGIServlet.handle(FastCGIServlet.java:499) php.java.servlet.fastcgi.FastCGIServlet.doGet(FastCGIServlet.java:521) javax.servlet.http.HttpServlet.service(HttpServlet.java:621) javax.servlet.http.HttpServlet.service(HttpServlet.java:722) org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:393) php.java.servlet.PhpCGIFilter.doFilter(PhpCGIFilter.java:126) Before I had a ClassNotFoundException so it knows there is a a class but for some odd reason I cant call the function. ( if I replace "com.micha.Hello1Bean" with some class that doesnt exist then I get that exception)

  Read the article

• Silverlight MEF – Download On Demand

  - by PeterTweed

  Take the Slalom Challenge at www.slalomchallenge.com! A common challenge with building complex applications in Silverlight is the initial download size of the xap file.  MEF enables us to build composable applications that allows us to build complex composite applications.  Wouldn’t it be great if we had a mechanism to spilt out components into different Silverlight applications in separate xap files and download the separate xap file only if needed?   MEF gives us the ability to do this.  This post will cover the basics needed to build such a composite application split between different silerlight applications and download the referenced silverlight application only when needed. Steps: 1.     Create a Silverlight 4 application 2.     Add references to the following assemblies: System.ComponentModel.Composition.dll System.ComponentModel.Composition.Initialization.dll 3.     Add a new Silverlight 4 application called ExternalSilverlightApplication to the solution that was created in step 1.  Ensure the new application is hosted in the web application for the solution and choose to not create a test page for the new application. 4.     Delete the App.xaml and MainPage.xaml files – they aren’t needed. 5.     Add references to the following assemblies in the ExternalSilverlightApplication project: System.ComponentModel.Composition.dll System.ComponentModel.Composition.Initialization.dll 6.     Ensure the two references above have their Copy Local values set to false.  As we will have these two assmblies in the original Silverlight application, we will have no need to include them in the built ExternalSilverlightApplication build. 7.     Add a new user control called LeftControl to the ExternalSilverlightApplication project. 8.     Replace the LayoutRoot Grid with the following xaml:     <Grid x:Name="LayoutRoot" Background="Beige" Margin="40" >         <Button Content="Left Content" Margin="30"></Button>     </Grid> 9.     Add the following statement to the top of the LeftControl.xaml.cs file using System.ComponentModel.Composition; 10.   Add the following attribute to the LeftControl class     [Export(typeof(LeftControl))]   This attribute tells MEF that the type LeftControl will be exported – i.e. made available for other applications to import and compose into the application. 11.   Add a new user control called RightControl to the ExternalSilverlightApplication project. 12.   Replace the LayoutRoot Grid with the following xaml:     <Grid x:Name="LayoutRoot" Background="Green" Margin="40"  >         <TextBlock Margin="40" Foreground="White" Text="Right Control" FontSize="16" VerticalAlignment="Center" HorizontalAlignment="Center" ></TextBlock>     </Grid> 13.   Add the following statement to the top of the RightControl.xaml.cs file using System.ComponentModel.Composition; 14.   Add the following attribute to the RightControl class     [Export(typeof(RightControl))] 15.   In your original Silverlight project add a reference to the ExternalSilverlightApplication project. 16.   Change the reference to the ExternalSilverlightApplication project to have it’s Copy Local value = false.  This will ensure that the referenced ExternalSilverlightApplication Silverlight application is not included in the original Silverlight application package when it it built.  The ExternalSilverlightApplication Silverlight application therefore has to be downloaded on demand by the original Silverlight application for it’s controls to be used. 1.     In your original Silverlight project add the following xaml to the LayoutRoot Grid in MainPage.xaml:         <Grid.RowDefinitions>             <RowDefinition Height="65*" />             <RowDefinition Height="235*" />         </Grid.RowDefinitions>         <Button Name="LoaderButton" Content="Download External Controls" Click="Button_Click"></Button>         <StackPanel Grid.Row="1" Orientation="Horizontal" HorizontalAlignment="Center" >             <Border Name="LeftContent" Background="Red" BorderBrush="Gray" CornerRadius="20"></Border>             <Border Name="RightContent" Background="Red" BorderBrush="Gray" CornerRadius="20"></Border>         </StackPanel>       The borders will hold the controls that will be downlaoded, imported and composed via MEF when the button is clicked. 2.     Add the following statement to the top of the MainPage.xaml.cs file using System.ComponentModel.Composition; 3.     Add the following properties to the MainPage class:         [Import(typeof(LeftControl))]         public LeftControl LeftUserControl { get; set; }         [Import(typeof(RightControl))]         public RightControl RightUserControl { get; set; }   This defines properties accepting LeftControl and RightControl types.  The attrributes are used to tell MEF the discovered type that should be applied to the property when composition occurs. 17.   Add the following event handler for the button click to the MainPage.xaml.cs file:         private void Button_Click(object sender, RoutedEventArgs e)         {                   DeploymentCatalog deploymentCatalog =     new DeploymentCatalog("ExternalSilverlightApplication.xap");                   CompositionHost.Initialize(deploymentCatalog);                   deploymentCatalog.DownloadCompleted += (s, i) =>                 {                     if (i.Error == null)                     {                         CompositionInitializer.SatisfyImports(this);                           LeftContent.Child = LeftUserControl;                         RightContent.Child = RightUserControl;                         LoaderButton.IsEnabled = false;                     }                 };                   deploymentCatalog.DownloadAsync();         } This is where the magic happens!  The deploymentCatalog object is pointed to the ExternalSilverlightApplication.xap file.  It is then associated with the CompositionHost initialization.  As the download will be asynchronous, an eventhandler is created for the DownloadCompleted event.  The deploymentCatalog object is then told to start the asynchronous download. The event handler that executes when the download is completed uses the CompositionInitializer.SatisfyImports() function to tell MEF to satisfy the Imports for the current class.  It is at this point that the LeftUserControl and RightUserControl properties are initialized with composed objects from the downloaded ExternalSilverlightApplication.xap package. 18.   Run the application click the Download External Controls button and see the controls defined in the ExternalSilverlightApplication application loaded into the original Silverlight application. Congratulations!  You have implemented download on demand capabilities for composite applications using the MEF DeploymentCatalog class.  You are now able to segment your applications into separate xap file for deployment.

  Read the article

• Dotted Border turns to solid if object is animated with jQuery.

  - by Serg Chernata

  I have a simple setup: an image and then a paragraph with a bit of info that is hidden and then slides up over the image on mouse hover. If I try to apply a border-top that is dashed or dotted onto the paragraph it simply turns into a solid line. Is this a known issue with a fix? I even tried adding the dotted border through jQuery and it still comes out as a solid line. <div class="wrap"> <img src="images/fillertxt.jpg" alt="image" /> <img src="images/filler.jpg" class="front" alt="image" /> <p class="info"> This is a short description with a bit of text. </p> </div> .wrap .info { width:204px; height:50px; background:url(images/infobg.jpg) repeat-x #8d9c0c; color:#f7f5ef; padding:3px; position:absolute; top:142px; left:0; border-top:3px dotted #8d9c0c; } $(document).ready(function(){ $("p.info").css("border-top","3px dotted #8d9c0c"); $(function(){ bindTypeOne(); $("input[type=radio]").click(function(){ if ($(this).attr("rel") == "type1"){ bindTypeOne(); } else if ($(this).attr("rel") == "type2"){ bindTypeTwo(); } }); }); function bindTypeOne() { $("div.wrap").hover(function(){ $(this).children("p.info").stop(); $(this).children(".front").stop().animate({"top":"141px"}, 400); },function(){ $(this).children("p.info").stop(); $(this).children(".front").stop().animate({"top":"0"}, 700); }); }; function bindTypeTwo() { $("div.wrap").hover(function(){ $(this).children(".front").stop(); $(this).children("p.info").stop().animate({"top":"80px","border-top":"3px dotted #8d9c0c"}, 400); },function(){ $(this).children(".front").stop(); $(this).children("p.info").stop().animate({"top":"142px"}, 700); }); }; });

  Read the article

• Android - Create a custom multi-line ListView bound to an ArrayList

  - by Bill Osuch

  The Android HelloListView tutorial shows how to bind a ListView to an array of string objects, but you'll probably outgrow that pretty quickly. This post will show you how to bind the ListView to an ArrayList of custom objects, as well as create a multi-line ListView. Let's say you have some sort of search functionality that returns a list of people, along with addresses and phone numbers. We're going to display that data in three formatted lines for each result, and make it clickable. First, create your new Android project, and create two layout files. Main.xml will probably already be created by default, so paste this in: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"  android:orientation="vertical"  android:layout_width="fill_parent"   android:layout_height="fill_parent">  <TextView   android:layout_height="wrap_content"   android:text="Custom ListView Contents"   android:gravity="center_vertical|center_horizontal"   android:layout_width="fill_parent" />   <ListView    android:id="@+id/ListView01"    android:layout_height="wrap_content"    android:layout_width="fill_parent"/> </LinearLayout> Next, create a layout file called custom_row_view.xml. This layout will be the template for each individual row in the ListView. You can use pretty much any type of layout - Relative, Table, etc., but for this we'll just use Linear: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"  android:orientation="vertical"  android:layout_width="fill_parent"   android:layout_height="fill_parent">   <TextView android:id="@+id/name"   android:textSize="14sp"   android:textStyle="bold"   android:textColor="#FFFF00"   android:layout_width="wrap_content"   android:layout_height="wrap_content"/>  <TextView android:id="@+id/cityState"   android:layout_width="wrap_content"   android:layout_height="wrap_content"/>  <TextView android:id="@+id/phone"   android:layout_width="wrap_content"   android:layout_height="wrap_content"/> </LinearLayout> Now, add an object called SearchResults. Paste this code in: public class SearchResults {  private String name = "";  private String cityState = "";  private String phone = "";  public void setName(String name) {   this.name = name;  }  public String getName() {   return name;  }  public void setCityState(String cityState) {   this.cityState = cityState;  }  public String getCityState() {   return cityState;  }  public void setPhone(String phone) {   this.phone = phone;  }  public String getPhone() {   return phone;  } } This is the class that we'll be filling with our data, and loading into an ArrayList. Next, you'll need a custom adapter. This one just extends the BaseAdapter, but you could extend the ArrayAdapter if you prefer. public class MyCustomBaseAdapter extends BaseAdapter {  private static ArrayList<SearchResults> searchArrayList;    private LayoutInflater mInflater;  public MyCustomBaseAdapter(Context context, ArrayList<SearchResults> results) {   searchArrayList = results;   mInflater = LayoutInflater.from(context);  }  public int getCount() {   return searchArrayList.size();  }  public Object getItem(int position) {   return searchArrayList.get(position);  }  public long getItemId(int position) {   return position;  }  public View getView(int position, View convertView, ViewGroup parent) {   ViewHolder holder;   if (convertView == null) {    convertView = mInflater.inflate(R.layout.custom_row_view, null);    holder = new ViewHolder();    holder.txtName = (TextView) convertView.findViewById(R.id.name);    holder.txtCityState = (TextView) convertView.findViewById(R.id.cityState);    holder.txtPhone = (TextView) convertView.findViewById(R.id.phone);    convertView.setTag(holder);   } else {    holder = (ViewHolder) convertView.getTag();   }      holder.txtName.setText(searchArrayList.get(position).getName());   holder.txtCityState.setText(searchArrayList.get(position).getCityState());   holder.txtPhone.setText(searchArrayList.get(position).getPhone());   return convertView;  }  static class ViewHolder {   TextView txtName;   TextView txtCityState;   TextView txtPhone;  } } (This is basically the same as the List14.java API demo) Finally, we'll wire it all up in the main class file: public class CustomListView extends Activity {     @Override     public void onCreate(Bundle savedInstanceState) {         super.onCreate(savedInstanceState);         setContentView(R.layout.main);                 ArrayList<SearchResults> searchResults = GetSearchResults();                 final ListView lv1 = (ListView) findViewById(R.id.ListView01);         lv1.setAdapter(new MyCustomBaseAdapter(this, searchResults));                 lv1.setOnItemClickListener(new OnItemClickListener() {          @Override          public void onItemClick(AdapterView<?> a, View v, int position, long id) {           Object o = lv1.getItemAtPosition(position);           SearchResults fullObject = (SearchResults)o;           Toast.makeText(ListViewBlogPost.this, "You have chosen: " + " " + fullObject.getName(), Toast.LENGTH_LONG).show();          }          });     }         private ArrayList<SearchResults> GetSearchResults(){      ArrayList<SearchResults> results = new ArrayList<SearchResults>();            SearchResults sr1 = new SearchResults();      sr1.setName("John Smith");      sr1.setCityState("Dallas, TX");      sr1.setPhone("214-555-1234");      results.add(sr1);            sr1 = new SearchResults();      sr1.setName("Jane Doe");      sr1.setCityState("Atlanta, GA");      sr1.setPhone("469-555-2587");      results.add(sr1);            sr1 = new SearchResults();      sr1.setName("Steve Young");      sr1.setCityState("Miami, FL");      sr1.setPhone("305-555-7895");      results.add(sr1);            sr1 = new SearchResults();      sr1.setName("Fred Jones");      sr1.setCityState("Las Vegas, NV");      sr1.setPhone("612-555-8214");      results.add(sr1);            return results;     } } Notice that we first get an ArrayList of SearchResults objects (normally this would be from an external data source...), pass it to the custom adapter, then set up a click listener. The listener gets the item that was clicked, converts it back to a SearchResults object, and does whatever it needs to do. Fire it up in the emulator, and you should wind up with something like this:

  Read the article

• Inline-editing: onBlur prevents onClick from being triggered (jQuery)

  - by codethief

  Hello StackOverflow community! I'm currently working on my own jQuery plugin for inline-editing as those that already exist don't fit my needs. Anyway, I'd like to give the user the following (boolean) options concerning the way editing is supposed to work: submit_button reset_on_blur Let's say the user would like to have a submit button (submit_button = true) and wants the inline input element to be removed as soon as it loses focus (reset_on_blur = true). This leads to an onClick handler being registered for the button and an onBlur handler being registered for the input element. Every time the user clicks the button, however, the onBlur handler is also triggered and results in the edit mode being left, i.e. before the onClick event occurs. This makes submitting impossible. FYI, the HTML in edit mode looks like this: <td><input type="text" class="ie-input" value="Current value" /><div class="ie-content-backup" style="display: none;">Backup Value</div><input type="submit" class="ie-button-submit" value="Save" /></td> So, is there any way I could check in the onBlur handler if the focus was lost while activating the submit button, so that edit mode isn't left before the submit button's onClick event is triggered? I've also tried to register a $('body').click() handler to simulate blur and to be able to trace back which element has been clicked, but that didn't work either and resulted in rather strange bugs: $('html').click(function(e) { // body doesn't span over full page height, use html instead // Don't reset if the submit button, the input element itself or the element to be edited inline was clicked. if(!$(e.target).hasClass('ie-button-submit') && !$(e.target).hasClass('ie-input') && $(e.target).get(0) != element.get(0)) { cancel(element); } }); jEditable uses the following piece of code. I don't like this approach, though, because of the delay. Let alone I don't even understand why this works. ;) input.blur(function(e) { /* prevent canceling if submit was clicked */ t = setTimeout(function() { reset.apply(form, [settings, self]); }, 500); }); Thanks in advance!

  Read the article

• How can I take the first 100 characters of html content ( without stripping the TAGS! )

  - by Atomiton

  There are lots of questions on how to strip html tags, but not many on functions/methods to close them. Here's the situation. I have a 500 character Message summary ( which includes html tags ), but I only want the first 100 characters. Problem is if I truncate the message, it could be in the middle of an html tag... which messes up stuff. Assuming the html is something like this: <div class="bd">"Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. <br/> <br/>Some Dates: April 30 - May 2, 2010 <br/> <p>Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. <em>Duis aute irure dolor in reprehenderit</em> in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum. <br/> </p> For more information about Lorem Ipsum doemdloe, visit: <br/> <a href="http://www.somesite.com" title="Some Conference">Some text link</a><br/> </div> How would I take the first ~100 characters or so? ( Although, ideally that would be the first approximately 100 characters of "CONTENT" ( in between the html tags ) I'm assuming the best way to do this would be a recursive algorithm that keeps track of the html tags and appends any tags that would be truncated, but that may not be the best approach. My first thoughts are using recursion to count nested tags, and when we reach 100 characters, look for the next "<" and then use recursion to write the closing html tags needed from there. The reason for doing this is to make a short summary of existing articles without requiring the user to go back and provide summaries for all the articles. I want to keep the html formatting, if possible. NOTE: Please ignore that the html isn't totally semantic. This is what I have to deal with from my WYSIWYG. EDIT: I added a potential solution ( that seems to work ) I figure others will run into this problem as well. I'm not sure it's the best... and it's probably not totally robust ( in fact, I know it isn't ), but I'd appreciate any feedback

  Read the article

• How do you make a CSS-defined table-cell scroll?

  - by Giffyguy

  I want to be able to set the height of the table, and force the cells to scroll individually if they are larger than the table. Consider the following code: (see it in action here) <div style="display: table; position: absolute; width: 25%; height: 80%; min-height: 80%; max-height: 80%; left: 0%; top: 10%; right: 75%; bottom: 10%; border: solid 1px black;"> <div style="display: table-row;"> <div style="display: table-cell; border: solid 1px blue;"> {Some dynamic text content}<br/> This cell should shrink to fit it's contents. </div> </div> <div style="display: table-row;"> <div style="display: table-cell; border: solid 1px red; overflow: scroll;"> This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. </div> </div> </div> If you open this code (in IE8, in my case) you'll notice that the second cell fits in the table nicely when the browser is maximized. In theory, when you shrink the browser (forcing the table to shrink as well), a vertical scrollbar should appear INSIDE the second cell when the table becomes too small to fit all of the content. But in reality, the table just grows vertically, beyond the bounds set by the CSS height attribute(s). Hopefully I've explained this scenario adequately... Does anyone know how I can get this to work?

  Read the article

• How do you make a CSS-defined table-cell scroll?

  - by Giffyguy

  I want to be able to set the height of the table, and force the cells to scroll individually if they are larger than the table. Consider the following code: (see it in action here) <div style="display: table; position: absolute; width: 25%; height: 80%; min-height: 80%; max-height: 80%; left: 0%; top: 10%; right: 75%; bottom: 10%; border: solid 1px black;"> <div style="display: table-row;"> <div style="display: table-cell; border: solid 1px blue;"> {Some dynamic text content}<br/> This cell should shrink to fit it's contents. </div> </div> <div style="display: table-row;"> <div style="display: table-cell; border: solid 1px red; overflow: scroll;"> This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. </div> </div> </div> If you open this code (in IE8, in my case) you'll notice that the second cell fits in the table nicely when the browser is maximized. In theory, when you shrink the browser (forcing the table to shrink as well), a vertical scrollbar should appear INSIDE the second cell when the table becomes too small to fit all of the content. But in reality, the table just grows vertically, beyond the bounds set by the CSS height attribute(s). Hopefully I've explained this scenario adequately... Does anyone know how I can get this to work?

  Read the article

< Previous Page | 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354  | Next Page >