Search Results

Search found 16417 results on 657 pages for 'computer linguist'.

Page 135/657 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• Windows undetectable after interrupted chkdsk

  - by Felthragar

  I have a computer that is running Windows XP. For some reason, the other day it wouldn't start giving me the following message: "ntoskrnl.exe is missing or corrupt" So I put the XP disc in the tray and fired up the repair console and ran the following: chkdsk /r It was on for about eight hours and it got to about 52% I believe. Then there was a power outage and the computer shut down (obviously). Today when I was booting it, it isn't even detecting there's an OS anymore. If I boot the computer with no cd in the tray it says: "Reboot and select a proper Boot device or Insert Boot Media in selected Boot device and press a key" If I run the repair console, or the xp installation program it isn't finding any OS installations. Any ideas on what to do next? Any help is appreciated. Thanks! Update: After turning boot-time diagnostics on, I got this message when booting without cd (instead of the previous one): "Couldn't open drive multi(0)disk(0)rdisk(0)partition(2)"

  Read the article

• Removing a malware that sets up as a system driver

  - by ereOn

  Hello, I recently tried to fix up my mother's computer which has some serious malwares. One of them apparently registered itself as system driver (tjbijkoq.sys if that can help) and after running a malware suppression tool, the computer won't boot anymore, complaining about a "critical driver that is missing". I think deleting the matching entry in the registry would just solve the problem, but obviously I can't boot up the computer (even in safe mode) to fix it. Do you guys have any experience with such an issue and how to solve this ? Thank you very much. The operating system is Windows Vista 32 bits Professional

  Read the article

• Bios wont post unless I restart power supply.

  - by remy

  I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

  Read the article

• Multicasting Windows 7 Image

  - by LawnChairSkank

  I am trying to deploy some new machines with windows 7 for the first time in our computer labs. We used to use third party imaging software and then run sysprep after the image was copied(XP), but it seems you can't go that route with windows 7. We set up a new imaging server with the windows system image manager, but when we try to multicast the image it pretty much takes down our whole staff and faculty network. I heard you can turn on a multicast feature on our cisco switches to help with the issue, but that it also slows the switches to a crawl. Another idea we have tried was pulling the the computer lab switch off the main network and plugging the imaging server directly into the computer lab switch so the multicast doesn't take down our network, but it doesn't seem to work without being able to hit a domain controller. Is there a way to multicast without taking out the network? I feel like I am missing something... Thanks in advance

  Read the article

• Route multiple subdomains on one external ip to multiple internal ips

  - by Abenil

  i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

  Read the article

• Network Drive Via Ethernet Port for Speed?

  - by Yar

  I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

  Read the article

• Network? or router? problem

  - by Robert H Mercer

  I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

  Read the article

• Clonezilla , NLite and PCs with different hardware specs

  - by r2b2

  I used Clonezilla to create and restore images from a master computer to other workstations with the same specs. But the problem now is there are new computers whose hardware specs are different than the ones I maintained (mostly the videocard is different). Is it possible to create a customize Windows XP installer using Nlite and integrate all potential videocard and motherboard drivers ? If I then used this NLite ISO to install to a master computer which i will later clone and restore the image to other workstations, will windows xp still pick up the correct driver set? During XP installation, does the installer transfers all the drivers to the computer's harddisk? Thanks! Ryan

  Read the article

• Allowing access to MPD from local network

  - by August Karlstrom

  I have successfully installed MPD (Music Player Daemon) on my desktop computer. Everything works fine when the client runs on the same machine as the server. Now I would like to access MPD from my laptop computer which is connected (wirelessly) to the local network. In order to allow access to MPD from any computer on the local network I have added this line to /etc/hosts.allow: mpd: .local and restarted MPD. Still I get the message "error: Connection refused" when I try to access MPD with MPC (Music Player Client) from my laptop. Any clues or troubleshooting hints?

  Read the article

• Too big a difference between Loud and Quiet when watching DVD's... constantly have to adjust volume.

  - by Dan

  It is hard for me to find the right volume for my computer to watch my dvd's on because it seems like most reasonable volumes become overwhelming at the loudest parts of a movie and it is hard to even make out the dialog at the quietest parts. I find I'm constantly adjusting the volume during the course of a movie. Are there ways to make the difference between the louds and the quiets not so extreme? (both computer related solutions and non-computer related solutions welcome). Like moving my speakers across the room and increasing the volume? or the opposite? Or would would the extremes be less noticeable if I used headphones? Are there movie players that might have more complex sound adjustment features? If there is a software solution out there for linux that would be great too. Thanks, Dan

  Read the article

• Install Ubuntu in UEFI mode (unable to boot from USB)

  - by Adele

  I recently bought a Dell Inspiron 15R SE with Windows 8 (64 bit) pre-installed (UEFI supported). I want to install Ubuntu in dual boot with Windows 8. I tried to follow all instruction here : https://help.ubuntu.com/community/UEFI And here : Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) So, I set Secure Boot to "off" into BIOS and I disable Fast Startup as described here : http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html I created a bootable USB key for Ubuntu (Ubuntu 13.10 64bits international Edition) with Unetbootin. The problem is I am unable to boot from the USB key. The computer tries to boot into infinite loop. I also tried to boot from USB with "Legacy Boot" option instead of UEFI. In this case, the computer says there are no bootable devices. Of course, I tried to boot from my USB key on an other computer having normal BIOS and it works perfectly. Have you ideas about what I need to do to be able to boot from USB ? Thanks in advance for your help, Adele

  Read the article

• Adding files and folders to a Root Folder (inode/directory)

  - by xBaldwin

  Ok so I'm fairly new to Ubuntu and wasn't even the one who put it one this computer(my friend did while I was storing it at his house because I was in the middle of transitioning between houses), but It's on here so I need to learn what I can so I can use it more effectively. My question at the moment is "Would it be safe to add files/folders to a folder (inode/directory) that requires Root access?" I continue to be informed by the system that the directory I am using is running low on space which I found odd seeing how I should have a lot more room on this computer. That's when I started looking at the directories and found that there are two with a bunch of un-used space on them. One says it has 46.9 GB of free space and the other has 24.9 GB of free space. Seems like a complete waste to not use that space and yet they both say they require Root access to add to them. I know that Root folders and files are normally all system folders and files. I also know that changing or deleting them can mess up the computer which right now I cant afford to do. I just don't know if it would mess anything up to add something to those folders. Thank you in advance to anyone who takes the time to reply and try to teach me about how all that works. I really do appreciate it and will do the same if by some crazy (completely unlikely) reason I have an answer to your question. :-)`

  Read the article

• Web Development - How to access custom host, defined in my hosts file, from another device in the same network

  - by Neara

  Ok, I hope i'll be able to explain the issue im experiencing. I'm working on a project, that has 2 parts: one takes all requests from usual localhost, the other handles requests from myhost.local. While trying to access both addresses from my computer, it works ok. But now i need to test myhost.local on mobile devices, connected to the same network. Usually i would just run server from my computer ip in the network: python manage.py runserver 10.0.0.8:8000 And then from any device, going to 10.0.0.8:8000 would show the project im working on. However, now accessing that ip address routes me straight to localhost. So, my question is how to access myhost.local from another device in same network? I don't want to change router settings, if that can be avoided, cos sometimes i work from places where i can't access router admin. Is there any network settings on my computer, that i can change to fix the routing to myhost.local w.o losing access to localhost as well?

  Read the article

• Testing a Virtualisation of a Debian Server (vmWare vSphere probably)

  - by xyza

  I'm soon getting access to a powerful root-server (quad-core, 16gb ram, 1gbit connection) where gameservers (like minecraft,counterstrike etc.) for different customers should be setup. My plan is to use programs such as vmWare vSphere to create some virtual machines for each customer. Inside such a virtual machine I'll setup the gameserver and maybe some kind of ftp server when its needed. Now that I'm kinda new to virtualisation of servers I want to test this local on my Desktop Computer. Is it possible to create a virtual machine of debian using vmWare Player on my Windows desktop computer and then install vmware vSphere in this VM to create multiple VM's inside that VM ? Or do I really need to install Debian on my desktop computer. (I want to use the time during installations etc. to work a bit at my windows installation) Some tips on virtualising debian servers are also appreciated :)

  Read the article

• How to make OS X send LOCAL IP address in www request headers?

  - by Louis W

  I need to be able to send the local IP address of a computer along with the headers when making requests to a website. Similar to the way you can get the _SERVER["REMOTE_ADDR"] in php, but the local ip (e.g. 192.168.100.1) This will be an intranet so the environment can be controlled. Anything can be installed on the computer, etc. This will be on a Mac OS X computer. Hoping for both Safari AND Firefox. But would be open to using one one. Does anyone know if this is possible? Thanks so much.

  Read the article

• Setup IPv6 over IPv4 tunnel in VPN

  - by bfmeb

  Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

  Read the article

• How do I find the source of soft page faults?

  - by David Robison

  I have Windows 7 x64 computer that according to Performance Monitor has 70,000 page faults / second when idling. That's seems like a lot to me (every other computer I check has basically 0 page faults / second when idling). If I use Resource Monitor or Process Explorer to check hard faults, I see that they are basically 0. So all the page faults are soft. Normally, soft page faults are not a problem, but I suspect they might be causing issues for this computer given there are so many. I would like to identify what programs are causing the soft faults. Are there any tools that exist the display the number of soft page faults for each process?

  Read the article

• WinXP on VPC - Unable to change the way users log on or off

  - by kamleshrao

  On my Win7 computer, I have setup a new Win-XP VPC. In the VPC window, when I click Ctrl+Alt+Del, it shows me Windows Task Manager. As per MS KB [ http://support.microsoft.com/kb/281980 ], we can change this behavior to show the regular Windows Security window. But while making this change, I am getting the following error: User Accounts Fast User Switching cannot be turned off from a remote connection to this computer. Log on to the computer locally to turn off Fast User Switching. OK Is there any way I can fix this setting?

  Read the article

• Blocked port 25 on Windows 7 64 bit

  - by Michal Gow

  Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

  Read the article

• ubuntu to ubuntu backup in internal network

  - by amirash

  hey, i got my development "home" server witch is ubuntu 10, i brought today a computer in order to make a backup to this computer (the development server does also to him self backups every day but im paranoaid so i want to have two backups just in case on diffrent computers) what is the best way to backup the system core of the development server (like norton ghost) & do a full & incrmnt backup of him to the new computer that ive brought? rsync? rdiff? scp? clonezilla?

  Read the article

• X200 Tablet notebook won't start after BIOS Update

  - by THEn

  I have LENOVO X200 Tablet and I ran the BIOS Update and the computer won't start after the BIOS update. When I ran the BIOS update utility it ran everything fine and asked to restart the computer but it wont start screen is blank. I unplugged the power and took of the battery and put them back and still not starting. Now it has [Power On] indicator light on and screen is not starting. I tried pressing F1 button while trying to start the computer but it doesn't do react to anything. Please help how I can start my Tablet. The update utility is http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-70651 Does any body know if X200 have any kind of hardware switch to reset the BIOS or any thing? What would be the best way to fix my BIOS? Thank you.

  Read the article

• Have Windows Automatically Login Without Entering Your Password

  - by deadlydog

  If you are like me and don't want to have to enter your password each time Windows loads, you can have Windows start up without prompting you to enter a user name or password.  The simple (and BAD) way to do this is to simply not have a password on your user account, but that’s a big security risk and will allow people to easily remote desktop into your computer. So, first set a password on your windows account if you don’t already have one.  Then select Run... from the start menu (or use Windows Key + R to open the Run window) and type control userpasswords2, which will open the user accounts application.   On the Users tab, clear the box for Users must enter a user name and password to use this computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use to automatically log into Windows.  That's it.    You may also want to make sure your screen saver is not set to prompt you for a password when it exits either. Now your computer is secure without getting in your way.

  Read the article

• One vs. many domain user accounts in a server farm

  - by mjustin

  We are in a migration process of a group of related computers (Intranet servers, SQL, application servers of one application) to a new domain. In the past we used one domain user account for every computer (web1, web2, appserver1, appserver2, sql1, sqlbackup ...) to access central Windows resources like network shares. Every computer also has a local user account with the same name. I am not sure if this is necessary, or if it would be easier to configure and maintain to use one domain user account. Are there key advantages / disadvantages of having one single user account vs. dedicated accounts per computer for this group of background servers? If I am not wrong, one advantage besides easier administration of the user account could be that moving installed applications and services around between the computers does not require a check of the access rights anymore. (Except where IP addresses or ports are used)

  Read the article

• Remote Install Mac OS X from Windows not on LAN?

  - by Frost Shadow

  I want to install applications from my Mac OS X install disc, or be able to archive-install from it, but it's back at my house outside my current LAN. Is there a way I can remotely access my OS X install disc on my home Windows XP computer from my Snow Leopard? In my help manual it says I can do remote installs, or use another computer's disc drive remotely, but it has to be with another computer on the LAN. Is there a way to combine my mac's LAN and my windows' LAN? I think it has something to do with making a VPN; is there a way to do that which will work between Snow Leopard and XP, doesn't require additional hardware, and is preferably free? Thanks a lot!

  Read the article

• Help with my application please! Can't open image(s) with error: External component has thrown an ex

  - by Brandon

  I have an application written in C# I believe and it adds images to a SQL Server 2005 Database. It requires .NET 3.5 to be installed on my computer. I installed .NET 3.5 and setup a database. It runs fine but then once it gets to image 100 when running on one computer, It stops and gives me this error: Can't open image(s) with error: External component has thrown an exception.... When I run the program on my own computer I am able to reach 300 images but then it stops after 300 images and gives me Can't open image(s) with error: External component has thrown an exception.... error once again. please help!

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >