runtime exception - Page 137

Checking out the Helios IIS Owin Web Server Host

- by Rick Strahl

During last week's MVP summit Microsoft showed a new light weight, Owin host called Helios, that can run directly on the IIS core without using the ASP.NET Runtime. It's light weight and fast, and offers a glimpse into where Microsoft is heading for building a more nimble and componentized runtime that is bound to be more flexible and agile. In this post I describe how to set up Helios to play around with and some of the implications it brings.

Read the article

ODI 11g - Dynamic and Flexible Code Generation

- by David Allan

ODI supports conditional branching at execution time in its code generation framework. This is a little used, little known, but very powerful capability - this let's one piece of template code behave dynamically based on a runtime variable's value for example. Generally knowledge module's are free of any variable dependency. Using variable's within a knowledge module for this kind of dynamic capability is a valid use case - definitely in the highly specialized area. The example I will illustrate is much simpler - how to define a filter (based on mapping here) that may or may not be included depending on whether at runtime a certain value is defined for a variable. I define a variable V_COND, if I set this variable's value to 1, then I will include the filter condition 'EMP.SAL > 1' otherwise I will just use '1=1' as the filter condition. I use ODIs substitution tags using a special tag '<$' which is processed just prior to execution in the runtime code - so this code is included in the ODI scenario code and it is processed after variables are substituted (unlike the '<?' tag). So the lines below are not equal ... <$ if ( "#V_COND".equals("1") ) { $> EMP.SAL > 1 <$ } else { $> 1 = 1 <$ } $> <? if ( "#V_COND".equals("1") ) { ?> EMP.SAL > 1 <? } else { ?> 1 = 1 <? } ?> When the <? code is evaluated the code is executed without variable substitution - so we do not get the desired semantics, must use the <$ code. You can see the jython (java) code in red is the conditional if statement that drives whether the 'EMP.SAL > 1' or '1=1' is included in the generated code. For this illustration you need at least the ODI 11.1.1.6 release - with the vanilla 11.1.1.5 release it didn't work for me (may be patches?). As I mentioned, normally KMs don't have dependencies on variables - since any users must then have these variables defined etc. but it does afford a lot of runtime flexibility if such capabilities are required - something to keep in mind, definitely.

Read the article

Howto: Using DotNetOpenAuth v3.4.x with ASP.NET MVC2

- by David Christiansen

When targeting ASP.NET MVC 2, this assemblyBinding makes MVC 1 references relink to MVC 2 so libraries such as DotNetOpenAuth that compile against MVC 1 will work with it. <runtime><legacyHMACWarning enabled="0" /><assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"><dependentAssembly><assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" /><bindingRedirect oldVersion="1.0.0.0" newVersion="2.0.0.0" /></dependentAssembly></assemblyBinding></runtime>

Read the article

Commandline Purge in AS11

- by Dheeraj Kumar

AS11 - B2B offering consists of numerous features that have been made available via commandline approach. Most of these are supplement to the already available User Interface based approach. One such is purging of runtime data. The commandline purge option enables the users to purge the runtime data, based on various criteria. This is an ANT based command, provides the flexibility to selectively set the criteria to purge the runtime data. Providing the command line option also enables the administrator to purge in bulk, without visiting the B2B UI, which can also be used for automation purpose By default archival is turned on for purge activity. As a pre-requisite, the respective folder needs to be configured in database with the proper permission. When no filename is provided for archived data, the sysdate will be considered for filename. Below are the various options to purge the runtime data Normal 0 Option ANT option Message state -Dmsgstate Date range -Dfromdate, -Dtodate Format : dd/mm/yyyy hh:mm AM/PM Trading partner -Dtp Direction -Ddirection Message Type -Dmsgtype Agreement Name -Dagreement IdType/ value -Didtype, -Didvalue Archive -Darchive True/false By default true Archive file name -Darchivename File name (optional), will be used when archive is set to true. Normal 0 Note: When using -Darchivename the value must be a unique file name. An existing file name used with -Darchivename throws an exception v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 Below are the few of ant commands and various options. Purge based on date range and message state: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dfromdate="19/12/2009 1:04 AM" -Dtodate="19/12/2009 1:05 AM" -Dmsgstate=MSG_COMPLETE -Darchivename="filename.dmp" Purge based on direction: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Ddirection="OUTBOUND" Normal 0 Purge based on agreement Name: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dagreement="agreement_name" Normal 0 Purge based on Trading partner Name: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dtp=GlobalChips Normal 0 Purge based on Message State: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dmsgstate="MSG_COMPLETE" Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Ddirection="OUTBOUND" -Dmsgstate="MSG_COMPLETE"

Read the article

What is new in Oracle SOA Suite 11g R1 PS6? by Shanny Anoep

- by JuergenKress

Oracle has released a new version 11.1.1.7.0 for their Oracle Fusion Middleware product line. This version includes Patch Set #6 (PS6) for Oracle SOA Suite 11g R1, with a big list of improvements and fixes for each component in that suite. In this post we will highlight some of the interesting updates with regards to troubleshooting, performance, reliability and scalability. Infrastructure/Purging scripts Database growth is a common problem for large-scale Oracle SOA Suite deployments. Oracle already provides multiple purging strategies for the SOA Suite runtime database. This patch set includes two new scripts for purging most of the runtime data: Table Recreation Script (TRS): This script can be used to reclaim as much database space as possible, while still retaining the open instances. It can be used as a corrective action for databases that grew excessively, for example when purging was not performed at all. This should be used as a single corrective action only; the script does not replace the normal purging scripts. Truncate script: Remove all records from the SOA Suite runtime tables without dropping the tables. This script can be used for cloning SOA Suite environments without copying the instance data, or for recreating test scenarios by cleaning all the runtime data. The Oracle SOA Suite Administrator's guide contains a table with the available purging strategies. Diagnostic dumps Using WLST you could already dump diagnostic information about various components of the SOA Suite. This version adds support to retrieve more information on BPEL and Adapters from the command-line. Diagnostic dumps for BPEL New diagnostic dumps are available for BPEL to get information on thread pools, average processing time for BPEL components, and average waiting times for asynchronous instances. This information can be very useful for performance analysis or troubleshooting. With WLST this information can be retrieved from the command-line and included for monitoring or reporting. Read the full article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: SOA Suite PS6,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

Read the article

Titanium SDK gives a "file too short" error

- by Dananjaya

I'm using Ubuntu 11.04 and recently installed Appcelerator Titanium Studio version 1.7 When I load up a demo project to run, I get an error like this, Couldn't load file:/home/dananjaya/.titanium/runtime/linux/1.1.0/libkhost.so, error: /home/dananjaya/.titanium/runtime/linux/1.1.0/libwebkittitanium-1.0.so.2: file too short Am I missing some dependencies here or is it a bug in the application? Thanks in advance.

Read the article

Microsoft Visual C++ 2010 Redistributable Package (x86)

- by iknowshall

I've had this problem numerous times when trying to install software in WINE, now I've come to the point where I have to install something in WINE. Installing the program works fine, as soon as I go to run it however I get the message Microsoft Visual C++ Runtime. Runtime Error I have installed the above package using wine tricks, but still nothing. Have goggled to try and find if I am missing Dependencies or anything obvious, but after that I am stuck. Cheers

Read the article

Helper class to dynamically modify the Location configuration element

- by anas

The location element is used to restrict user or role access on a specific path.The path could be a folder,aspx page,ashx,axd or any other file that is handled by ASP.NET runtime. In most cases, you use that element declarativley in the web.config file of your website.In this case, you are declaratively telling the ASP.NET runtime and specifically the UrlAuthorizationModule or the FileAuthorizationModule (depending on the Authentication Mode) to grant/deny the access to that path for the specified...(read more)

Read the article

Apress "Pro DLR in .NET 4' - ISBN 978-1-430203066-3 - Conclusion

- by TATWORTH

Having finished Pro DLR in .Net 4, I have concluded that this is a book that needs to be read through several times and the examples worked through. Since the Dynamic Language Runtime is as much a radical change as the the original Common Language Runtime, this is hardly surprising. Ultimatly the DLR will enable more niche programming languages, hence I recommend this book to Dot Net teams for when they have a requirement that justifies the effort.

Read the article

Dynamic Manipulation of Silverlight controls

In this article, you will learn how to create and delete Silverlight controls or XAML elements at runtime. You will also learn how to create event handlers and associate them with the dynamically created control at runtime.

Read the article

Runnin Framework 4.0 with Powershell

- by Mike Koerner

I had problems running scripts with Framework 4.0 assemblies I created. The error I was getting was Add-Type : Could not load file or assembly 'file:///C:\myDLL.dll' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded. I had to add the supported framework to the powershell.exe.config file.<supportedRuntime version="v4.0.30319"/>I still had a problem running the assembly so I had to recompile and set "Generate serialization Assembly" to off.

Read the article

How to improve this piece of code

- by user303518

Can anyone help me on this. It may be very frustrating for you all. But I want you guys to take a moment to look at the code below and please tell me all the things that are wrong in the below piece of code. You can copy it into your visual studio to analyze this better. You don’t have to make this code compile. My task is to get the following things: Most obvious mistakes with this code All the things that are wrong/bad practices with the code below Modify/Write an optimized version of this code. Keep in mind, the code DOES NOT need to compile. Reduce the number of lines of code You should NEVER try to implement something like below: public List<ValidationErrorDto> ProcessEQuote(string eQuoteXml, long programUniversalID) { // Get Program Info. DataTable programs = GetAllPrograms(); DataRow[] programRows = programs.Select(string.Format("ProgramUniversalID = {0}", programUniversalID)); long programID = (long)programRows[0]["ProgramID"]; string programName = (string)programRows[0]["Description"]; // Get Config file values. string fromEmail = ConfigurationManager.AppSettings["eQuotesFromEmail"]; string technicalSupportPhone = ConfigurationManager.AppSettings["TechnicalSupportPhone"]; string fromEmailDisplayName = string.IsNullOrEmpty(ConfigurationManager.AppSettings["eQuotesFromDisplayName"]) ? null : string.Format(ConfigurationManager.AppSettings["eQuotesFromDisplayName"], programName); string itEmail = !string.IsNullOrEmpty(ConfigurationManager.AppSettings["ITEmail"]) ? ConfigurationManager.AppSettings["ITEmail"] : string.Empty; string itName = !string.IsNullOrEmpty(ConfigurationManager.AppSettings["ITName"]) ? ConfigurationManager.AppSettings["ITName"] : "IT"; try { List<ValidationErrorDto> allValidationErrors = new List<ValidationErrorDto>(); List<ValidationErrorDto> validationErrors = new List<ValidationErrorDto>(); if (validationErrors.Count == 0) { validationErrors.AddRange(ValidateEQuoteXmlAgainstSchema(eQuoteXml)); if (validationErrors.Count == 0) { XmlDocument eQuoteXmlDoc = new XmlDocument(); eQuoteXmlDoc.LoadXml(eQuoteXml); XmlElement rootElement = eQuoteXmlDoc.DocumentElement; XmlNodeList quotesList = rootElement.SelectNodes("Quote"); foreach (XmlNode node in quotesList) { // Each node should be a quote node but to be safe, check if (node.Name == "Quote") { string groupName = node.SelectSingleNode("Group/GroupName").InnerText; string groupCity = node.SelectSingleNode("Group/GroupCity").InnerText; string groupPostalCode = node.SelectSingleNode("Group/GroupZipCode").InnerText; string groupSicCode = node.SelectSingleNode("Group/GroupSIC").InnerText; string generalAgencyLicenseNumber = node.SelectSingleNode("Group/GALicenseNbr").InnerText; string brokerName = node.SelectSingleNode("Group/BrokerName").InnerText; string deliverToEmailAddress = node.SelectSingleNode("Group/ReturnEmailAddress").InnerText; string brokerEmail = node.SelectSingleNode("Group/BrokerEmail").InnerText; string groupEligibleEmployeeCountString = node.SelectSingleNode("Group/GroupNbrEmployees").InnerText; string quoteEffectiveDateString = node.SelectSingleNode("Group/QuoteEffectiveDate").InnerText; string salesRepName = node.SelectSingleNode("Group/SalesRepName").InnerText; string salesRepPhone = node.SelectSingleNode("Group/SalesRepPhone").InnerText; string salesRepEmail = node.SelectSingleNode("Group/SalesRepEmail").InnerText; string brokerLicenseNumber = node.SelectSingleNode("Group/BrokerLicenseNbr").InnerText; DateTime? quoteEffectiveDate = null; int eligibleEmployeeCount = int.Parse(groupEligibleEmployeeCountString); DateTime quoteEffectiveDateOut; if (!DateTime.TryParse(quoteEffectiveDateString, out quoteEffectiveDateOut)) validationErrors.Add(ValidationHelper.CreateValidationError((long)QuoteField.EffectiveDate, "Quote Effective Date", ValidationErrorDto.ValueOutOfRange, false, ValidationHelper.CreateValidationContext(Entity.QuoteDetail, "Quote"))); else quoteEffectiveDate = quoteEffectiveDateOut; Dictionary<string, string> replacementCodeValues = new Dictionary<string, string>(); if (string.IsNullOrEmpty(Resources.ParameterMessageKeys.ResourceManager.GetString("GroupName"))) throw new InvalidOperationException("GroupName key is not configured"); replacementCodeValues.Add(Resources.ParameterMessageKeys.GroupName, groupName); replacementCodeValues.Add(Resources.ParameterMessageKeys.ProgramName, programName); replacementCodeValues.Add(Resources.ParameterMessageKeys.SalesRepName, salesRepName); replacementCodeValues.Add(Resources.ParameterMessageKeys.SalesRepPhone, salesRepPhone); replacementCodeValues.Add(Resources.ParameterMessageKeys.SalesRepEmail, salesRepEmail); replacementCodeValues.Add(Resources.ParameterMessageKeys.TechnicalSupportPhone, technicalSupportPhone); replacementCodeValues.Add(Resources.ParameterMessageKeys.EligibleEmployeCount, eligibleEmployeeCount.ToString()); // Retrieve the CityID and StateID long? cityID = null; long? stateID = null; DataSet citiesAndStates = Addresses.GetCitiesAndStatesFromPostalCode(groupPostalCode); DataTable cities = citiesAndStates.Tables[0]; DataTable states = citiesAndStates.Tables[1]; DataRow[] cityRows = cities.Select(string.Format("Name = '{0}'", groupCity)); if (cityRows.Length > 0) { cityID = (long)cityRows[0]["CityID"]; DataRow[] stateRows = states.Select(string.Format("CityID = {0}", cityID)); if (stateRows.Length > 0) stateID = (long)stateRows[0]["StateID"]; } // If the StateID does not exist, then we cannot get the GeneralAgency, so set a validation error and do not contine. // Else, Continue and look for an General Agency. If a GA was found, look for or create a Broker. Then look for or create a Prospect Group // Then using the info, create a quote. if (!stateID.HasValue) validationErrors.Add(ValidationHelper.CreateValidationError((long)ProspectGroupField.State, "Prospect Group State", ValidationErrorDto.RequiredFieldMissing, false, ValidationHelper.CreateValidationContext(Entity.ProspectGroup, "Prospect Group"))); bool brokerValidationError = false; SalesRepDto salesRep = GetSalesRepByEmail(salesRepEmail, ref validationErrors); if (salesRep == null) { string exceptionMessage = "Sales Rep Not found in Opportunity System. Please make sure Sales Rep is present in the system by adding the sales rep in AWP SR Add Screen." + Environment.NewLine; exceptionMessage = exceptionMessage + " Sales Rep Name: " + salesRepName + Environment.NewLine; exceptionMessage = exceptionMessage + " Sales Rep Email: " + salesRepEmail + Environment.NewLine; exceptionMessage = exceptionMessage + " Module : E-Quote Service" + Environment.NewLine; throw new Exception(exceptionMessage); } if (validationErrors.Count == 0) { // Note that StateID and EffectiveDate should be valid at this point. If it weren't there would be validation errors. // Find General Agency long? generalAgencyID; validationErrors.AddRange(GetEQuoteGeneralAgency(generalAgencyLicenseNumber, stateID.Value, out generalAgencyID)); // If GA was found, check for Broker. if (validationErrors.Count == 0 && generalAgencyID.HasValue) { Dictionary<string, string> brokerNameParts = ContactHelper.GetNamePartsFromFullName(brokerName); long? brokerID; validationErrors.AddRange(CreateEQuoteBroker(brokerNameParts["FirstName"], brokerNameParts["LastName"], brokerEmail, brokerLicenseNumber, stateID.Value, generalAgencyID.Value, salesRep, programID, out brokerID)); // If Broker was found but had validation errors if (validationErrors.Count > 0) { DeliverEmailMessage(programID, quoteEffectiveDate.Value, fromEmail, fromEmailDisplayName, itEmail, DocumentType.EQuoteBrokerValidationFailureMessageEmail, replacementCodeValues); brokerValidationError = true; } // If Broker was found, check for Prospect Group if (validationErrors.Count == 0 && brokerID.HasValue) { long? prospectGroupID; validationErrors.AddRange(CreateEQuoteProspectGroup(groupName, cityID, stateID, groupPostalCode, groupSicCode, brokerID.Value, out prospectGroupID)); if (validationErrors.Count == 0 && prospectGroupID.HasValue) { if (validationErrors.Count == 0) { long? quoteID; validationErrors.AddRange(CreateEQuote(programID, prospectGroupID.Value, generalAgencyID.Value, quoteEffectiveDate.Value, eligibleEmployeeCount, deliverToEmailAddress, node.SelectNodes("Employees/Employee"), deliverToEmailAddress, out quoteID)); if (validationErrors.Count == 0 && quoteID.HasValue) { QuoteFromServiceDto quoteFromService = GetQuoteByQuoteID(quoteID.Value); // Generate Pre-Message replacementCodeValues.Add(Resources.ParameterMessageKeys.QuoteNumber, string.Format("{0}.{1}", quoteFromService.QuoteNumber, quoteFromService.QuoteVersion)); replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, brokerName); replacementCodeValues.Add(Resources.ParameterMessageKeys.LicenseNumbers, brokerLicenseNumber); DeliverEmailMessage(programID, quoteEffectiveDate.Value, fromEmail, fromEmailDisplayName, deliverToEmailAddress, DocumentType.EQuotePreMessageEmail, replacementCodeValues); bool quoteGenerated = false; try { quoteGenerated = GenerateAndDeliverInitialQuote(quoteID.Value); } catch (Exception exception) { TraceLogger.LogException(exception, LoggingCategory); if (replacementCodeValues.ContainsKey(Resources.ParameterMessageKeys.Name)) replacementCodeValues[Resources.ParameterMessageKeys.Name] = itName; else replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, itName); if (replacementCodeValues.ContainsKey(Resources.ParameterMessageKeys.Errors)) replacementCodeValues[Resources.ParameterMessageKeys.Errors] = string.Format("Errors:\r\n:{0}", exception); else replacementCodeValues.Add(Resources.ParameterMessageKeys.Errors, string.Format("Errors:\r\n:{0}", exception)); DeliverEmailMessage(programID, quoteEffectiveDate.Value, fromEmail, fromEmailDisplayName, itEmail, DocumentType.EQuoteSystemFailureMessageEmail, replacementCodeValues); } if (!quoteGenerated) { // Generate System Failure Message if (replacementCodeValues.ContainsKey(Resources.ParameterMessageKeys.Name)) replacementCodeValues[Resources.ParameterMessageKeys.Name] = brokerName; else replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, brokerName); if (replacementCodeValues.ContainsKey(Resources.ParameterMessageKeys.Errors)) replacementCodeValues[Resources.ParameterMessageKeys.Errors] = string.Empty; else replacementCodeValues.Add(Resources.ParameterMessageKeys.Errors, string.Empty); DeliverEmailMessage(programID, quoteEffectiveDate.Value, fromEmail, fromEmailDisplayName, itEmail, DocumentType.EQuoteSystemFailureMessageEmail, replacementCodeValues); } } } } } } } //if (validationErrors.Count > 0) // Per spec, if Broker Validation returned an error we already sent an email, don't send another generic one if (validationErrors.Count > 0 && (!brokerValidationError)) { StringBuilder errorString = new StringBuilder(); foreach (ValidationErrorDto validationError in validationErrors) errorString = errorString.AppendLine(string.Format(" - {0}", ValidationHelper.GetValidationErrorReason(validationError, true))); replacementCodeValues.Add(Resources.ParameterMessageKeys.Errors, errorString.ToString()); if (replacementCodeValues.ContainsKey(Resources.ParameterMessageKeys.Name)) replacementCodeValues[Resources.ParameterMessageKeys.Name] = brokerName; else replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, brokerName); // HACK: If there is no effective date, then use Today's date. Do we care about the effecitve dat on validation message? if (quoteEffectiveDate.HasValue) DeliverEmailMessage(programID, quoteEffectiveDate.Value, fromEmail, fromEmailDisplayName, itEmail, DocumentType.EQuoteValidationFailureMessageEmail, replacementCodeValues); else DeliverEmailMessage(programID, DateTime.Now, fromEmail, fromEmailDisplayName, itEmail, DocumentType.EQuoteValidationFailureMessageEmail, replacementCodeValues); } allValidationErrors.AddRange(validationErrors); validationErrors.Clear(); } } } else { // Use todays date as the effective date. Dictionary<string, string> replacementCodeValues = new Dictionary<string, string>(); StringBuilder errorString = new StringBuilder(); foreach (ValidationErrorDto validationError in validationErrors) errorString = errorString.AppendLine(string.Format(" - {0}", ValidationHelper.GetValidationErrorReason(validationError, true))); replacementCodeValues.Add(Resources.ParameterMessageKeys.Errors, string.Format("The following validation errors occurred: \r\n{0}", errorString)); replacementCodeValues.Add(Resources.ParameterMessageKeys.ProgramName, programName); replacementCodeValues.Add(Resources.ParameterMessageKeys.GroupName, "Group"); replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, itName); DeliverEmailMessage(programID, DateTime.Now, fromEmail, null, itEmail, DocumentType.EQuoteSystemFailureMessageEmail, replacementCodeValues); allValidationErrors.AddRange(validationErrors); validationErrors.Clear(); } } return allValidationErrors; } catch (Exception exception) { TraceLogger.LogException(exception, LoggingCategory); // Use todays date as the effective date. Dictionary<string, string> replacementCodeValues = new Dictionary<string, string>(); replacementCodeValues.Add(Resources.ParameterMessageKeys.ProgramName, programName); replacementCodeValues.Add(Resources.ParameterMessageKeys.GroupName, "Group"); replacementCodeValues.Add(Resources.ParameterMessageKeys.Name, itName); replacementCodeValues.Add(Resources.ParameterMessageKeys.Errors, string.Format("Errors:\r\n:{0}", exception)); DeliverEmailMessage(programID, DateTime.Now, fromEmail, null, itEmail, DocumentType.EQuoteSystemFailureMessageEmail, replacementCodeValues); throw new FaultException(exception.ToString()); } }

Read the article

Unable to use nMock GetProperty routine on a property of an inherited object...

- by Chris

I am getting this error when trying to set an expectation on an object I mocked that inherits from MembershipUser: ContactRepositoryTests.UpdateTest : FailedSystem.InvalidProgramException: JIT Compiler encountered an internal limitation. Server stack trace: at MockObjectType1.ToString() Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(ref MessageData msgData, Int32 type) at System.Object.ToString() at NMock2.Internal.ExpectationBuilder.On(Object receiver) Here are the tools I am using... VS2008 (SP1) Framework 3.5 nUnit 2.4.8 nMock 2.0.0.44 Resharper 4.1 I am at a loss as to why this would be happening. Any help would be appreciated. Test Class... [TestFixture] public class AddressRepositoryTests { private Mockery m_Mockery; private Data.IAddress m_MockDataAddress; private IUser m_MockUser; [SetUp] public void Setup() { m_Mockery = new Mockery(); m_MockDataAddress = m_Mockery.NewMock<Data.IAddress>(); m_MockUser = m_Mockery.NewMock<IUser>(); } [TearDown] public void TearDown() { m_Mockery.Dispose(); } [Test] public void CreateTest() { string line1 = "unitTestLine1"; string line2 = "unitTestLine2"; string city = "unitTestCity"; int stateId = 1893; string postalCode = "unitTestPostalCode"; int countryId = 223; bool active = false; int createdById = 1; Expect.Once .On(m_MockUser) .GetProperty("Identity") .Will(Return.Value(createdById)); Expect.Once .On(m_MockDataAddress) .Method("Insert") .With( line1, line2, city, stateId, postalCode, countryId, active, createdById, Is.Anything ) .Will(Return.Value(null)); IAddressRepository addressRepository = new AddressRepository(m_MockDataAddress); IAddress address = addressRepository.Create( line1, line2, city, stateId, postalCode, countryId, active, m_MockUser ); Assert.IsNull(address); } } User Class... public interface IUser { int? Identity { get; set; } int? CreatedBy { get; set; } DateTime CreatedOn { get; set; } int? ModifiedBy { get; set; } DateTime? ModifiedOn { get; set; } string UserName { get; } object ProviderUserKey { get; } string Email { get; set; } string PasswordQuestion { get; } string Comment { get; set; } bool IsApproved { get; set; } bool IsLockedOut { get; } DateTime LastLockoutDate { get; } DateTime CreationDate { get; } DateTime LastLoginDate { get; set; } DateTime LastActivityDate { get; set; } DateTime LastPasswordChangedDate { get; } bool IsOnline { get; } string ProviderName { get; } string ToString(); string GetPassword(); string GetPassword(string passwordAnswer); bool ChangePassword(string oldPassword, string newPassword); bool ChangePasswordQuestionAndAnswer(string password, string newPasswordQuestion, string newPasswordAnswer); string ResetPassword(string passwordAnswer); string ResetPassword(); bool UnlockUser(); } public class User : MembershipUser, IUser { #region Public Properties private int? m_Identity; public int? Identity { get { return m_Identity; } set { if (value <= 0) throw new Exception("Address.Identity must be greater than 0."); m_Identity = value; } } public int? CreatedBy { get; set; } private DateTime m_CreatedOn = DateTime.Now; public DateTime CreatedOn { get { return m_CreatedOn; } set { m_CreatedOn = value; } } public int? ModifiedBy { get; set; } public DateTime? ModifiedOn { get; set; } #endregion Public Properties #region Public Constructors public User() { } #endregion Public Constructors } Address Class... public interface IAddress { int? Identity { get; set; } string Line1 { get; set; } string Line2 { get; set; } string City { get; set; } string PostalCode { get; set; } bool Active { get; set; } int? CreatedBy { get; set; } DateTime CreatedOn { get; set; } int? ModifiedBy { get; set; } DateTime? ModifiedOn { get; set; } } public class Address : IAddress { #region Public Properties private int? m_Identity; public int? Identity { get { return m_Identity; } set { if (value <= 0) throw new Exception("Address.Identity must be greater than 0."); m_Identity = value; } } public string Line1 { get; set; } public string Line2 { get; set; } public string City { get; set; } public string PostalCode { get; set; } public bool Active { get; set; } public int? CreatedBy { get; set; } private DateTime m_CreatedOn = DateTime.Now; public DateTime CreatedOn { get { return m_CreatedOn; } set { m_CreatedOn = value; } } public int? ModifiedBy { get; set; } public DateTime? ModifiedOn { get; set; } #endregion Public Properties } AddressRepository Class... public interface IAddressRepository { IAddress Create(string line1, string line2, string city, int stateId, string postalCode, int countryId, bool active, IUser createdBy); } public class AddressRepository : IAddressRepository { #region Private Properties private Data.IAddress m_DataAddress; private Data.IAddress DataAddress { get { if (m_DataAddress == null) m_DataAddress = new Data.Address(); return m_DataAddress; } set { m_DataAddress = value; } } #endregion Private Properties #region Public Constructor public AddressRepository() { } public AddressRepository(Data.IAddress dataAddress) { DataAddress = dataAddress; } #endregion Public Constructor #region Public Methods public IAddress Create(string line1, string line2, string city, int stateId, string postalCode, int countryId, bool active, IUser createdBy) { if (String.IsNullOrEmpty(line1)) throw new Exception("You must enter a Address Line 1 to register."); if (String.IsNullOrEmpty(city)) throw new Exception("You must enter a City to register."); if (stateId <= 0) throw new Exception("You must select a State to register."); if (String.IsNullOrEmpty(postalCode)) throw new Exception("You must enter a Postal Code to register."); if (countryId <= 0) throw new Exception("You must select a Country to register."); DataSet dataSet = DataAddress.Insert( line1, line2, city, stateId, postalCode, countryId, active, createdBy.Identity, DateTime.Now ); return null; } #endregion Public Methods } DataAddress Class... public interface IAddress { DataSet GetByAddressId (int? AddressId); DataSet Update (int? AddressId, string Address1, string Address2, string City, int? StateId, string PostalCode, int? CountryId, bool? IsActive, Guid? ModifiedBy); DataSet Insert (string Address1, string Address2, string City, int? StateId, string PostalCode, int? CountryId, bool? IsActive, int? CreatedBy, DateTime? CreatedOn); } public class Address : IAddress { public DataSet GetByAddressId (int? AddressId) { Database database = DatabaseFactory.CreateDatabase(); DbCommand dbCommand = database.GetStoredProcCommand("prAddress_GetByAddressId"); DataSet dataSet; try { database.AddInParameter(dbCommand, "AddressId", DbType.Int32, AddressId); dataSet = database.ExecuteDataSet(dbCommand); } catch (SqlException sqlException) { string callMessage = "prAddress_GetByAddressId " + "@AddressId = " + AddressId; throw new Exception(callMessage, sqlException); } return dataSet; } public DataSet Update (int? AddressId, string Address1, string Address2, string City, int? StateId, string PostalCode, int? CountryId, bool? IsActive, Guid? ModifiedBy) { Database database = DatabaseFactory.CreateDatabase(); DbCommand dbCommand = database.GetStoredProcCommand("prAddress_Update"); DataSet dataSet; try { database.AddInParameter(dbCommand, "AddressId", DbType.Int32, AddressId); database.AddInParameter(dbCommand, "Address1", DbType.AnsiString, Address1); database.AddInParameter(dbCommand, "Address2", DbType.AnsiString, Address2); database.AddInParameter(dbCommand, "City", DbType.AnsiString, City); database.AddInParameter(dbCommand, "StateId", DbType.Int32, StateId); database.AddInParameter(dbCommand, "PostalCode", DbType.AnsiString, PostalCode); database.AddInParameter(dbCommand, "CountryId", DbType.Int32, CountryId); database.AddInParameter(dbCommand, "IsActive", DbType.Boolean, IsActive); database.AddInParameter(dbCommand, "ModifiedBy", DbType.Guid, ModifiedBy); dataSet = database.ExecuteDataSet(dbCommand); } catch (SqlException sqlException) { string callMessage = "prAddress_Update " + "@AddressId = " + AddressId + ", @Address1 = " + Address1 + ", @Address2 = " + Address2 + ", @City = " + City + ", @StateId = " + StateId + ", @PostalCode = " + PostalCode + ", @CountryId = " + CountryId + ", @IsActive = " + IsActive + ", @ModifiedBy = " + ModifiedBy; throw new Exception(callMessage, sqlException); } return dataSet; } public DataSet Insert (string Address1, string Address2, string City, int? StateId, string PostalCode, int? CountryId, bool? IsActive, int? CreatedBy, DateTime? CreatedOn) { Database database = DatabaseFactory.CreateDatabase(); DbCommand dbCommand = database.GetStoredProcCommand("prAddress_Insert"); DataSet dataSet; try { database.AddInParameter(dbCommand, "Address1", DbType.AnsiString, Address1); database.AddInParameter(dbCommand, "Address2", DbType.AnsiString, Address2); database.AddInParameter(dbCommand, "City", DbType.AnsiString, City); database.AddInParameter(dbCommand, "StateId", DbType.Int32, StateId); database.AddInParameter(dbCommand, "PostalCode", DbType.AnsiString, PostalCode); database.AddInParameter(dbCommand, "CountryId", DbType.Int32, CountryId); database.AddInParameter(dbCommand, "IsActive", DbType.Boolean, IsActive); database.AddInParameter(dbCommand, "CreatedBy", DbType.Int32, CreatedBy); database.AddInParameter(dbCommand, "CreatedOn", DbType.DateTime, CreatedOn); dataSet = database.ExecuteDataSet(dbCommand); } catch (SqlException sqlException) { string callMessage = "prAddress_Insert " + "@Address1 = " + Address1 + ", @Address2 = " + Address2 + ", @City = " + City + ", @StateId = " + StateId + ", @PostalCode = " + PostalCode + ", @CountryId = " + CountryId + ", @IsActive = " + IsActive + ", @CreatedBy = " + CreatedBy + ", @CreatedOn = " + CreatedOn; throw new Exception(callMessage, sqlException); } return dataSet; } }

Read the article

Configuring Fed Authentication Methods in OIF / IdP

- by Damien Carru

In this article, I will provide examples on how to configure OIF/IdP to map OAM Authentication Schemes to Federation Authentication Methods, based on the concepts introduced in my previous entry. I will show examples for the three protocols supported by OIF: SAML 2.0 SSO SAML 1.1 SSO OpenID 2.0 Enjoy the reading! Configuration As I mentioned in my previous article, mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. WLST Commands The two OIF WLST commands that can be used to define mapping Federation Authentication Methods to OAM Authentication Schemes are: addSPPartnerProfileAuthnMethod() to define a mapping on an SP Partner Profile, taking as parameters: The name of the SP Partner Profile The Federation Authentication Method The OAM Authentication Scheme name addSPPartnerAuthnMethod() to define a mapping on an SP Partner , taking as parameters: The name of the SP Partner The Federation Authentication Method The OAM Authentication Scheme name Note: I will discuss in a subsequent article the other parameters of those commands. In the next sections, I will show examples on how to use those methods: For SAML 2.0, I will configure the SP Partner Profile, that will apply all the mappings to SP Partners referencing this profile, unless they override mapping definition For SAML 1.1, I will configure the SP Partner. For OpenID 2.0, I will configure the SP/RP Partner SAML 2.0 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 2.0 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use BasicScheme as the Authentication Scheme Map BasicSessionScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:Password Federation Authentication Method Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> BasicScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to BasicScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "BasicScheme") Exit the WLST environment:exit() The user will now be challenged via HTTP Basic Authentication defined in the BasicScheme for AcmeSP. Also, as noted earlier, the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via HTTP Basic Authentication, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> Mapping BasicScheme To change the Federation Authentication Method mapping for the BasicScheme to urn:oasis:names:tc:SAML:2.0:ac:classes:Password instead of urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport for the saml20-sp-partner-profile SAML 2.0 SP Partner Profile (the profile to which my AcmeSP Partner is bound to), I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:Password", "BasicScheme") Exit the WLST environment:exit() After authentication via HTTP Basic Authentication, OIF/IdP would now issue an Assertion similar to (see that the AuthnContextClassRef was changed from PasswordProtectedTransport to Password): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:Password </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to OAMLDAPPluginAuthnScheme instead of BasicScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will now be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme and BasicScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods. As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthnContextClassRef set to OAMLDAPPluginAuthnScheme): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> OAMLDAPPluginAuthnScheme </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To add the OAMLDAPPluginAuthnScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapping, I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to PasswordProtectedTransport): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> SAML 1.1 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 1.1 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method Use LDAPScheme as the Authentication Scheme Map LDAPScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:1.0:am:password to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner to OAMLDAPPluginAuthnScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for the SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods (in the SP Partner Profile). As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to OAMLDAPPluginAuthnScheme): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="OAMLDAPPluginAuthnScheme"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To map the OAMLDAPPluginAuthnScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password for this SP Partner only, I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to password): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> LDAPScheme as Authentication Scheme I will now show that by defining a Federation Authentication Mapping at the Partner level, this now ignores all mappings defined at the SP Partner Profile level. For this test, I will switch the default Authentication Scheme for this SP Partner back to LDAPScheme, and the Assertion issued by OIF/IdP will not be able to map this LDAPScheme to a Federation Authentication Method anymore, since A Federation Authentication Method mapping is defined at the SP Partner level and thus the mappings defined at the SP Partner Profile are ignored The LDAPScheme is not listed in the mapping at the Partner level I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for this SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to LDAPScheme): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="LDAPScheme"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Mapping LDAPScheme at Partner Level To fix this issue, we will need to add the LDAPScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password mapping for this SP Partner only. I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to password): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> OpenID 2.0 In the OpenID 2.0 flows, the RP must request use of PAPE, in order for OIF/IdP/OP to include PAPE information. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. The WLST command will take a list of policies, delimited by the ',' character, instead of SAML 2.0 or SAML 1.1 where a single Federation Authentication Method had to be specified. Test Setup In this setup, OIF is acting as an IdP/OP and is integrated with a remote OpenID 2.0 SP/RP partner identified by AcmeRP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Map LDAPScheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods (the second one is a custom for this use case) LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. No Federation Authentication Method is defined OOTB for OpenID 2.0, so if the IdP/OP issue an SSO response with a PAPE Response element, it will specify the scheme name instead of Federation Authentication Methods After authentication via FORM, OIF/IdP would issue an SSO Response similar to: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=LDAPScheme&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D Mapping LDAPScheme To map the LDAP Scheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods, I will execute the addSPPartnerAuthnMethod() method (the policies will be comma separated): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeRP", "http://schemas.openid.net/pape/policies/2007/06/phishing-resistant,http://openid-policies/password-protected", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to the two policies): https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant+http%3A%2F%2Fopenid-policies%2Fpassword-protected&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will cover how OIF/IdP can be configured so that an SP can request a specific Federation Authentication Method to challenge the user during Federation SSO.Cheers,Damien Carru

Read the article

What is the best way to go about testing that we handle failures appropriately?

- by Earlz

we're working on error handling in an application. We try to have fairly good automated test coverage. One big problem though is that we don't really know of a way to test some of our error handling. For instance, we need to test that whenever there is an uncaught exception, a message is sent to our server with exception information. The big problem with this is that we strive to never have an uncaught exception(and instead have descriptive error messages). So, how do we test something what we never want to actually happen?

Read the article

BizTalk – Routing failure on Delivery Notifications (BizTalk 2006 R2 to 2013)

- by S.E.R.

Originally posted on: http://geekswithblogs.net/SERivas/archive/2013/11/11/biztalk-routing-failure-on-delivery-notifications.aspxThis is a detailed explanation of a something I posted a few month ago on stackoverflow, concerning a weird behavior (a bug, really…) of the delivery notifications in BizTalk. Reminder: what are delivery notifications Mechanism BizTalk has the ability to automatically publish positive acknowledgments (ACK) when it has succeeded transmitting a message or negative acknowledgments (NACK) in case of a transmission failure. Orchestrations can use delivery notifications to subscribe to those ACKs and NACKs in order to know if a message sent on a one-way send port has been successfully transmitted. Delivery Notifications can be “activated” in two ways: The most common and easy way is to set the Delivery Notification property of a logical send port (in the orchestration designer) to Transmitted: Another way is to set the BTS.AckRequired context property of the message to be sent to true: NOTE: fundamentally, those methods are strictly equivalent since the fact of setting the Delivery Notification to Transmitted on the send port only tells BizTalk the BTS.AckRequired context property has to be set to true on the outgoing message. Related context properties ACKs and NACKs have a common set of propoted context properties, which are : Propriété Description AckType Equals ACK when successful or NACK otherwise AckID MessageID of the message concerned by the acknowledgment AckOwnerID InstanceID of the instance associated with the acknowledgment AckSendPortID ID of the send port AckSendPortName Name of the send port AckOutboundTransportLocation URI of the send port AckReceivePortID ID of the port the message came from AckReceivePortName Name of the port the message came from AckInboundTransportLocation URI of the port the message came from Detailed behavior The way Delivery Notifications are handled by BizTalk is peculiar compared to the standard behavior of the Message Box: if no active subscription exists for the acknowledgment, it is simply discarded. The direct consequence of this is that there can be no routing failure for an acknowledgment, and an acknowledgment cannot be suspended. Moreover, when a message is sent to a send port where Delivery Notification = Transmitted, a correlation set is initialized and a correlation token is attached to the message (Context property: CorrelationToken). This correlation token will also be attached to the acknowledgment. So when the acknowledgment is issued, it is automatically routed to the source orchestration. Finally, when a NACK is received by the source orchestration, a DeliveryFailureException is thrown, which can be caught in Catch section. Context of the problem Consider this scenario: In an orchestration, Delivery Notifications are activated on a One-Way send port In case of a transmission failure, the messaging instance is suspended and the orchestration catches an exception (DeliveryFailureException). When the exception is caught, the orchestration does some logging and then terminates (thanks to a Terminate shape). So that leaves only the suspended messaging instance, waiting to be resumed. Symptoms Once the problem that caused the transmission failure is solved, the messaging instance is resumed. Considering what was said in the reminder, we would expect the instance to complete, leaving no active or suspended instance. Nevertheless, the result is that the messaging instance is once more suspended, this time because of a routing failure: The routing failure report shows that the suspended message has the following attached properties: Explanation Those properties clearly indicate that the message being suspended is an acknowledgment (ACK in this case), which was published in the message box and was supended because no subscribers were found. This makes sense, since the source orchestration was terminated before we resumed the messaging instance. So its subscription to the acknowledgments was no longer active when the ACK was published, which explains the routing failure. But this behavior is in direct contradiction with what was said earlier: an acknowledgment must be discarded when no subscriber is found and therefore should not be suspended. Cause It is indeed an outright bug, which appeared with the SP1 of BizTalk 2006 R2 and was never corrected since then: not in the next 4 CUs, not in BizTalk 2009, not in 2010 and not event in 2013 – though I haven’t tested CU1 and CU2 for this last edition, but I bet there is nothing to be expected from those CUs (on this particular point). Side effects This bug can have pretty nasty side effects: this behavior can be propagated to other ports, due to routing mechanisms. For instance: you have configured the ESB Toolkit and have activated the “Enable routing failure for failed messages”. The result will be that the ESB Exception SQL send port will also try and publish ACKs or NACKs concerning its own messaging instances. In itself, this is already messy, but remember that those acknowledgments will also have the source correlation token attached to them… See how far it goes? Well, actually there is more: in SQL send ports, transactions will be rolled back because of the routing failure (I guess it also happens with other adapters - like Oracle, but I haven’t tested them). Again, think of what happens when the send port is the ESB Exception send port: your BizTalk box is going mad, but you have no idea since no exception can be written in the exception database! All of this can be tricky to diagnose, I can tell you that… Solution There is no real solution, only a work-around, but it won’t solve all of the problems and side effects. The idea is to create an orchestration which subscribes to all acknowledgments. That is to say: The message type of the incoming message will be XmlDocument The BTS.AckType property exists The logical receive port will use direct binding By doing so, all acknowledgments will be consumed by an instance of this orchestration, thus avoiding the routing failure. Here is an example of what this orchestration could look like: In order not to pollute the HAT and the DTA Db (after all, this orchestration is only meant to be a palliative to some faulty internal BizTalk mechanism, so there should be no trace of its execution), all tracking must be deactivated:

Read the article

I have a stacktrace and limit of 250 characters for a bug report

- by George Duckett

I'm developing an xbox indie game and as a last-resort I have a try...catch encompassing everything. At this point if an exception is raised I can get the user to send me a message through the xbox however the limit is 250 characters. How can I get the most value out of my 250 characters? I don't want to do any encoding / compressing at least initially. Any solution to this problem could be compressed if needed as a second step anyway. I'm thinking of doing things like turning this: at EasyStorage.SaveDevice.VerifyIsReady() at EasyStorage.SaveDevice.Save(String containerName, String fileName) into this (drop the repeated namespace/class and method parameter names): at EasyStorage.SaveDevice.VerifyIsReady() at ..Save(String, String) Or maybe even just including the inner-most method, then only line numbers up the stack etc. TL;DR: Given an exception with a stacktrace how would you get the most useful debugging infromation out of 250 characters? (It will be a .net exception/stacktrace)

Read the article

How to grep 2 or 3 lines, one containing the text I want, and the others just below it?

- by Kaustubh P

This is a snapshot of error log: 06:16:29,933 ERROR EmailRMManager$:45 - Exception In get Message com.rabbitmq.client.AlreadyClosedException: clean connection shutdown; reason: Attempt to use closed channel at com.rabbitmq.client.impl.AMQChannel.ensureIsOpen(AMQChannel.java:195) at com.rabbitmq.client.impl.AMQChannel.rpc(AMQChannel.java:222) at com.rabbitmq.client.impl.AMQChannel.rpc(AMQChannel.java:208) at com.rabbitmq.client.impl.AMQChannel.exnWrappingRpc(AMQChannel.java:139) at com.rabbitmq.client.impl.ChannelN.basicGet(ChannelN.java:645) I do the following command: cat foo.log | grep ERROR to get an OP as: 06:16:29,933 ERROR EmailRMManager$:45 - Exception In get Message What command should I execute to get the output as 06:16:29,933 ERROR EmailRMManager$:45 - Exception In get Message com.rabbitmq.client.AlreadyClosedException: clean connection shutdown; reason: Attempt to use closed channel ie, also grep the line(s) after the pattern?

Read the article

Tester/Doer pattern: Assume the caller conforms to the pattern or be defensive and repeat the check?

- by Daniel Hilgarth

Assume a simple class that implements the Tester/Doer pattern: public class FooCommandHandler : ICommandHandler { public bool CanHandle(object command) { return command is FooCommand; } public void Handle(object command) { var fooCommand = (FooCommand)command; // Do something with fooCommand } } Now, if someone doesn't conform to the pattern and calls Handle without verifying the command via CanHandle, the code in Handle throws an exception. However, depending on the actual implementation of Handle this can be a whole range of different exceptions. The following implementation would check CanHandle again in Handle and throw a descriptive exception: public void Handle(object command) { if(!CanHandle(command)) throw new TesterDoerPatternUsageViolationException("Please call CanHandle first"); // actual implementation of handling the command. } This has the advantage that the exception is very descriptive. It has the disadvantage that CanHandle is called twice for "good" clients. Is there a consensus on which variation should be used?

Read the article

Why does IDLE continue to crash? [migrated]

- by Dyana

Idle keeps crashing and I can't figure it out. After restarting the computer and reinstalling Python, none of which seemed to work, I looked to my peers and was told to "install one of the Tcl/Tk". After getting another opinion I was also told that I already had this and found it to be true but decided to try it anyway since it continued to crash. Nothing has improved and I have an assignment due. Any ideas on why this continues to happen and what I can do to fix the crash? Problem details: Process: Python [1183] Path: /Applications/Python 3.3/IDLE.app/Contents/MacOS/Python Identifier: org.python.IDLE Version: 3.3.0 (3.3.0) Code Type: X86-64 (Native) Parent Process: launchd [793] Date/Time: 2012-11-05 14:10:54.124 -0500 OS Version: Mac OS X 10.7.5 (11G63) Report Version: 9 Interval Since Last Report: 181805 sec Crashes Since Last Report: 4 Per-App Interval Since Last Report: 20 sec Per-App Crashes Since Last Report: 4 Anonymous UUID: 68994A08-7FFB-4074-A553-CB60A60BB412 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Application Specific Information: * Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Error (1007) creating CGSWindow on line 263'

Read the article

Eclipse NullPointerException at getFontList

- by Jan Fabry

Eclipse doesn't start anymore. I get a dialog box that points me to a log file with the following entry: !SESSION 2009-12-08 08:49:16.263 ----------------------------------------------- eclipse.buildId=M20090917-0800 java.version=1.6.0_17 java.vendor=Apple Inc. BootLoader constants: OS=macosx, ARCH=x86_64, WS=cocoa, NL=en_US Framework arguments: -product org.eclipse.epp.package.php.product -keyring /Users/cheezy/.eclipse_keyring -showlocation Command-line arguments: -os macosx -ws cocoa -arch x86_64 -product org.eclipse.epp.package.php.product -keyring /Users/cheezy/.eclipse_keyring -showlocation !ENTRY org.eclipse.osgi 4 0 2009-12-08 08:49:19.993 !MESSAGE Application error !STACK 1 java.lang.NullPointerException at org.eclipse.swt.graphics.Device.getFontList(Device.java:369) at org.eclipse.jface.resource.FontRegistry.filterData(FontRegistry.java:465) at org.eclipse.jface.resource.FontRegistry.createFont(FontRegistry.java:499) at org.eclipse.jface.resource.FontRegistry.defaultFontRecord(FontRegistry.java:563) at org.eclipse.jface.resource.FontRegistry.getFontRecord(FontRegistry.java:673) at org.eclipse.jface.resource.FontRegistry.get(FontRegistry.java:613) at org.eclipse.jface.resource.JFaceResources.getDialogFont(JFaceResources.java:273) at org.eclipse.jface.dialogs.Dialog.initializeDialogUnits(Dialog.java:925) at org.eclipse.jface.dialogs.TitleAreaDialog.createContents(TitleAreaDialog.java:131) at org.eclipse.jface.window.Window.create(Window.java:431) at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:1089) at org.eclipse.jface.window.Window.open(Window.java:790) at org.eclipse.ui.internal.ide.ChooseWorkspaceDialog.prompt(ChooseWorkspaceDialog.java:91) at org.eclipse.ui.internal.ide.application.IDEApplication.promptForWorkspace(IDEApplication.java:275) at org.eclipse.ui.internal.ide.application.IDEApplication.checkInstanceLocation(IDEApplication.java:223) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:103) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) I did clean up my font list in Font Book by disabling duplicate fonts. I also upgraded to Mac OS X 10.6.2.

Read the article

JVM system time runs faster than HP UNIX OS system time

- by winston

Hello I have the following output from a simple debug jsp: Weblogic Startup Since: Friday, October 19, 2012, 08:36:12 AM Database Current Time: Wednesday, December 12, 2012, 11:43:44 AM Weblogic JVM Current Time: Wednesday, December 12, 2012, 11:45:38 AM Line 1 was a recorded variable during WebLogic webapp startup. Line 2 was output from database query select sysdate from dual; Line 3 was output from java code new Date() I have checked from shell date command that line 2 output conforms with OS time. The output of line 3 was mysterious. I don't know how it comes from Java VM. On another machine with same setting, the same jsp output like this: Weblogic Startup Since: Tuesday, December 11, 2012, 02:29:06 PM Database Current Time: Wednesday, December 12, 2012, 11:51:48 AM Weblogic JVM Current Time: Wednesday, December 12, 2012, 11:51:50 AM Another machine: Weblogic Startup Since: Monday, December 10, 2012, 05:00:34 PM Database Current Time: Wednesday, December 12, 2012, 11:52:03 AM Weblogic JVM Current Time: Wednesday, December 12, 2012, 11:52:07 AM Findings: the pattern shows that the longer Weblogic startup, the larger the discrepancy of OS time with JVM time. Anybody could help on HP JVM? On HP UNIX, NTP was done daily. Anyway here comes the server versions: HP-UX machinex B.11.31 U ia64 2426956366 unlimited-user license java version "1.6.0.04" Java(TM) SE Runtime Environment (build 1.6.0.04-jinteg_28_apr_2009_04_46-b00) Java HotSpot(TM) Server VM (build 11.3-b02-jre1.6.0.04-rc2, mixed mode) WebLogic Server Version: 10.3.2.0 Java properties java.runtime.name=Java(TM) SE Runtime Environment java.runtime.version=1.6.0.04-jinteg_28_apr_2009_04_46-b00 java.vendor=Hewlett-Packard Co. java.vendor.url=http\://www.hp.com/go/Java java.version=1.6.0.04 java.vm.name=Java HotSpot(TM) 64-Bit Server VM java.vm.info=mixed mode java.vm.specification.vendor=Sun Microsystems Inc. java.vm.vendor="Hewlett-Packard Company" sun.arch.data.model=64 sun.cpu.endian=big sun.cpu.isalist=ia64r0 sun.io.unicode.encoding=UnicodeBig sun.java.launcher=SUN_STANDARD sun.jnu.encoding=8859_1 sun.management.compiler=HotSpot 64-Bit Server Compiler sun.os.patch.level=unknown os.name=HP-UX os.version=B.11.31

Read the article

Error when starting .Net-Application from ThinApp-Application

- by user50209

one of our customers uses SAP through VMWare ThinApp. In SAP there is a button that launches an .Net application from a server. When starting the .Net-application directly, there is no error. If the user tries to start the application by clicking the button in the ThinApp-Application, it displays the following errors: Microsoft Visual C++ Runtime Library R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. After clicking "OK" it displays: Microsoft Visual C++ Runtime Library Runtime Error! R6030 - CRT not initialized So, does the customer have to install some components into his ThinApp (if yes, which?) to get things working? Regards, inno ----- [EDIT] ----- @Sean: It's installed the following way: The .exe of the .Net-Application is on a mapped drive on a server. All clients have the requirements installed (.Net-framework for example) and start the .exe from the mapped drive. The ThinApp-Application tries to start this application and throws the mentioned exceptions. AFAIK there are no entry points for this application configured. What I should also mention is: The .Net-Application crashes during execution. That means, we have a debug mode implemented that shows what the application is doing. The application shows what it's doing and after some steps it crashes. The interesting point is: It's a .Net-application, not a C++ Application.

Read the article

Unicorn 3.3.1 and Rack 1.1.0 issues?

- by user41422

I'm upgrading from the Ruby Enterprise Edition 1.8.6 to the latest 1.8.7 version with Unicorn to facilitate an upgrade to Rails 2.3.10, and am running into some issues. Should I uninstall the older versions of these gems? Here's the log messages: I'm upgrading from the Ruby Enterprise Edition 1.8.6 to the latest 1.8.7 version with Unicorn to facilitate an upgrade to Rails 2.3.10, and am running into some issues. Should I uninstall the older versions of these gems? I, [2011-02-02T22:06:16.328076 #30672] INFO -- : listening on addr=0.0.0.0:8080 fd=3 I, [2011-02-02T22:06:16.333137 #30672] INFO -- : Refreshing Gem list /srv/ree/bin/unicorn_rails must be run inside RAILS_ROOT: #<Gem::LoadError: can't activate rack (~> 1.1.0, runtime) for ["actionpack-2.3.10", "rails-2.3.10"], already activated rack-1.2.1 for ["unicorn-3.3.1"]> I, [2011-02-02T22:07:12.259436 #30701] INFO -- : listening on addr=0.0.0.0:8080 fd=3 I, [2011-02-02T22:07:12.259952 #30701] INFO -- : Refreshing Gem list /srv/ree/bin/unicorn_rails must be run inside RAILS_ROOT: #<Gem::LoadError: can't activate rack (~> 1.1.0, runtime) for ["actionpack-2.3.10", "rails-2.3.10"], already activated rack-1.2.1 for ["unicorn-3.3.1"]> I, [2011-02-02T22:09:27.787177 #30772] INFO -- : listening on addr=0.0.0.0:8080 fd=3 I, [2011-02-02T22:09:27.787691 #30772] INFO -- : Refreshing Gem list /srv/ree/bin/unicorn_rails must be run inside RAILS_ROOT: #<Gem::LoadError: can't activate rack (~> 1.1.0, runtime) for ["actionpack-2.3.10", "rails-2.3.10"], already activated rack-1.2.1 for ["unicorn-3.3.1"]> I, [2011-02-02T22:10:44.175407 #30846] INFO -- : listening on addr=0.0.0.0:8080 fd=3 I, [2011-02-02T22:10:44.175928 #30846] INFO -- : Refreshing Gem list /srv/ree/bin/unicorn_rails must be run inside RAILS_ROOT: #<Gem::LoadError: can't activate rack (~> 1.1.0, runtime) for ["actionpack-2.3.10", "rails-2.3.10"], already activated rack-1.2.1 for ["unicorn-3.3.1"]>

Read the article

ASP.NET MVC 3: Layouts and Sections with Razor

- by ScottGu

This is another in a series of posts I’m doing that cover some of the new ASP.NET MVC 3 features: Introducing Razor (July 2nd) New @model keyword in Razor (Oct 19th) Layouts with Razor (Oct 22nd) Server-Side Comments with Razor (Nov 12th) Razor’s @: and <text> syntax (Dec 15th) Implicit and Explicit code nuggets with Razor (Dec 16th) Layouts and Sections with Razor (Today) In today’s post I’m going to go into more details about how Layout pages work with Razor. In particular, I’m going to cover how you can have multiple, non-contiguous, replaceable “sections” within a layout file – and enable views based on layouts to optionally “fill in” these different sections at runtime. The Razor syntax for doing this is clean and concise. I’ll also show how you can dynamically check at runtime whether a particular layout section has been defined, and how you can provide alternate content (or even an alternate layout) in the event that a section isn’t specified within a view template. This provides a powerful and easy way to customize the UI of your site and make it clean and DRY from an implementation perspective. What are Layouts? You typically want to maintain a consistent look and feel across all of the pages within your web-site/application. ASP.NET 2.0 introduced the concept of “master pages” which helps enable this when using .aspx based pages or templates. Razor also supports this concept with a feature called “layouts” – which allow you to define a common site template, and then inherit its look and feel across all the views/pages on your site. I previously discussed the basics of how layout files work with Razor in my ASP.NET MVC 3: Layouts with Razor blog post. Today’s post will go deeper and discuss how you can define multiple, non-contiguous, replaceable regions within a layout file that you can then optionally “fill in” at runtime. Site Layout Scenario Let’s look at how we can implement a common site layout scenario with ASP.NET MVC 3 and Razor. Specifically, we’ll implement some site UI where we have a common header and footer on all of our pages. We’ll also add a “sidebar” section to the right of our common site layout. On some pages we’ll customize the SideBar to contain content specific to the page it is included on: And on other pages (that do not have custom sidebar content) we will fall back and provide some “default content” to the sidebar: We’ll use ASP.NET MVC 3 and Razor to enable this customization in a nice, clean way. Below are some step-by-step tutorial instructions on how to build the above site with ASP.NET MVC 3 and Razor. Part 1: Create a New Project with a Layout for the “Body” section We’ll begin by using the “File->New Project” menu command within Visual Studio to create a new ASP.NET MVC 3 Project. We’ll create the new project using the “Empty” template option: This will create a new project that has no default controllers in it: Creating a HomeController We will then right-click on the “Controllers” folder of our newly created project and choose the “Add->Controller” context menu command. This will bring up the “Add Controller” dialog: We’ll name the new controller we create “HomeController”. When we click the “Add” button Visual Studio will add a HomeController class to our project with a default “Index” action method that returns a view: We won’t need to write any Controller logic to implement this sample – so we’ll leave the default code as-is. Creating a View Template Our next step will be to implement the view template associated with the HomeController’s Index action method. To implement the view template, we will right-click within the “HomeController.Index()” method and select the “Add View” command to create a view template for our home page: This will bring up the “Add View” dialog within Visual Studio. We do not need to change any of the default settings within the above dialog (the name of the template was auto-populated to Index because we invoked the “Add View” context menu command within the Index method). When we click the “Add” Button within the dialog, a Razor-based “Index.cshtml” view template will be added to the \Views\Home\ folder within our project. Let’s add some simple default static content to it: Notice above how we don’t have an <html> or <body> section defined within our view template. This is because we are going to rely on a layout template to supply these elements and use it to define the common site layout and structure for our site (ensuring that it is consistent across all pages and URLs within the site). Customizing our Layout File Let’s open and customize the default “_Layout.cshtml” file that was automatically added to the \Views\Shared folder when we created our new project: The default layout file (shown above) is pretty basic and simply outputs a title (if specified in either the Controller or the View template) and adds links to a stylesheet and jQuery. The call to “RenderBody()” indicates where the main body content of our Index.cshtml file will merged into the output sent back to the browser. Let’s modify the Layout template to add a common header, footer and sidebar to the site: We’ll then edit the “Site.css” file within the \Content folder of our project and add 4 CSS rules to it: And now when we run the project and browse to the home “/” URL of our project we’ll see a page like below: Notice how the content of the HomeController’s Index view template and the site’s Shared Layout template have been merged together into a single HTML response. Below is what the HTML sent back from the server looks like: Part 2: Adding a “SideBar” Section Our site so far has a layout template that has only one “section” in it – what we call the main “body” section of the response. Razor also supports the ability to add additional "named sections” to layout templates as well. These sections can be defined anywhere in the layout file (including within the <head> section of the HTML), and allow you to output dynamic content to multiple, non-contiguous, regions of the final response. Defining the “SideBar” section in our Layout Let’s update our Layout template to define an additional “SideBar” section of content that will be rendered within the <div id=”sidebar”> region of our HTML. We can do this by calling the RenderSection(string sectionName, bool required) helper method within our Layout.cshtml file like below: The first parameter to the “RenderSection()” helper method specifies the name of the section we want to render at that location in the layout template. The second parameter is optional, and allows us to define whether the section we are rendering is required or not. If a section is “required”, then Razor will throw an error at runtime if that section is not implemented within a view template that is based on the layout file (which can make it easier to track down content errors). If a section is not required, then its presence within a view template is optional, and the above RenderSection() code will render nothing at runtime if it isn’t defined. Now that we’ve made the above change to our layout file, let’s hit refresh in our browser and see what our Home page now looks like: Notice how we currently have no content within our SideBar <div> – that is because the Index.cshtml view template doesn’t implement our new “SideBar” section yet. Implementing the “SideBar” Section in our View Template Let’s change our home-page so that it has a SideBar section that outputs some custom content. We can do that by opening up the Index.cshtml view template, and by adding a new “SiderBar” section to it. We’ll do this using Razor’s @section SectionName { } syntax: We could have put our SideBar @section declaration anywhere within the view template. I think it looks cleaner when defined at the top or bottom of the file – but that is simply personal preference. You can include any content or code you want within @section declarations. Notice above how I have a C# code nugget that outputs the current time at the bottom of the SideBar section. I could have also written code that used ASP.NET MVC’s HTML/AJAX helper methods and/or accessed any strongly-typed model objects passed to the Index.cshtml view template. Now that we’ve made the above template changes, when we hit refresh in our browser again we’ll see that our SideBar content – that is specific to the Home Page of our site – is now included in the page response sent back from the server: The SideBar section content has been merged into the proper location of the HTML response : Part 3: Conditionally Detecting if a Layout Section Has Been Implemented Razor provides the ability for you to conditionally check (from within a layout file) whether a section has been defined within a view template, and enables you to output an alternative response in the event that the section has not been defined. This provides a convenient way to specify default UI for optional layout sections. Let’s modify our Layout file to take advantage of this capability. Below we are conditionally checking whether the “SideBar” section has been defined without the view template being rendered (using the IsSectionDefined() method), and if so we render the section. If the section has not been defined, then we now instead render some default content for the SideBar: Note: You want to make sure you prefix calls to the RenderSection() helper method with a @ character – which will tell Razor to execute the HelperResult it returns and merge in the section content in the appropriate place of the output. Notice how we wrote @RenderSection(“SideBar”) above instead of just RenderSection(“SideBar”). Otherwise you’ll get an error. Above we are simply rendering an inline static string (<p>Default SideBar Content</p>) if the section is not defined. A real-world site would more likely refactor this default content to be stored within a separate partial template (which we’d render using the Html.RenderPartial() helper method within the else block) or alternatively use the Html.Action() helper method within the else block to encapsulate both the logic and rendering of the default sidebar. When we hit refresh on our home-page, we will still see the same custom SideBar content we had before. This is because we implemented the SideBar section within our Index.cshtml view template (and so our Layout rendered it): Let’s now implement a “/Home/About” URL for our site by adding a new “About” action method to our HomeController: The About() action method above simply renders a view back to the client when invoked. We can implement the corresponding view template for this action by right-clicking within the “About()” method and using the “Add View” menu command (like before) to create a new About.cshtml view template. We’ll implement the About.cshtml view template like below. Notice that we are not defining a “SideBar” section within it: When we browse the /Home/About URL we’ll see the content we supplied above in the main body section of our response, and the default SideBar content will rendered: The layout file determined at runtime that a custom SideBar section wasn’t present in the About.cshtml view template, and instead rendered the default sidebar content. One Last Tweak… Let’s suppose that at a later point we decide that instead of rendering default side-bar content, we just want to hide the side-bar entirely from pages that don’t have any custom sidebar content defined. We could implement this change simply by making a small modification to our layout so that the sidebar content (and its surrounding HTML chrome) is only rendered if the SideBar section is defined. The code to do this is below: Razor is flexible enough so that we can make changes like this and not have to modify any of our view templates (nor make change any Controller logic changes) to accommodate this. We can instead make just this one modification to our Layout file and the rest happens cleanly. This type of flexibility makes Razor incredibly powerful and productive. Summary Razor’s layout capability enables you to define a common site template, and then inherit its look and feel across all the views/pages on your site. Razor enables you to define multiple, non-contiguous, “sections” within layout templates that can be “filled-in” by view templates. The @section {} syntax for doing this is clean and concise. Razor also supports the ability to dynamically check at runtime whether a particular section has been defined, and to provide alternate content (or even an alternate layout) in the event that it isn’t specified. This provides a powerful and easy way to customize the UI of your site - and make it clean and DRY from an implementation perspective. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Search Results

Search found 17554 results on 703 pages for 'runtime exception'.

Page 137/703 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144 | Next Page >

- by Rick Strahl

- by David Allan

- by David Christiansen

- by Dheeraj Kumar

- by JuergenKress

- by Dananjaya

- by iknowshall

- by anas

- by TATWORTH

- by Mike Koerner

- by user303518

- by Chris

- by Damien Carru

- by Earlz

- by S.E.R.

- by George Duckett

- by Kaustubh P

- by Daniel Hilgarth

- by Dyana

- by Jan Fabry

- by winston

- by user50209

- by user41422

- by ScottGu

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144 | Next Page >