Search Results

Search found 4572 results on 183 pages for 'dual monitors'.

Page 138/183 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• IIS6 can't find site on local network

  - by chezy525

  I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

  Read the article

• Change Apache DocumentDirectory path in trueCrypt partition

  - by Alan C

  Hello, I'm recently moving from windows to linux, so I've setup my machine to dual boot Windows7 and Ubuntu 10.04. I was able to successfully setup Apache on the Ubuntu partition, but I need to move the DocumentRoot since my websites are on a TrueCrypt partition that is in another hard drive so I can have them accessible in both OS. I followed some guides on how to change the path for the DocumentRoot so I end up modifiying the default file at /etc/apache2/sites-available DocumentRoot /media/truecrypt1/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /media/truecrypt1/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> Those are the lines that I've changed, but now when I go to localhost I always get the Forbidden You don't have permission to access / on this server. Apache/2.2.14 (Ubuntu) Server at localhost Port 80

  Read the article

• PC reboots regularly

  - by Bob

  Windows XP RAID 5 drives Intel Dual Core processor 2 GB Ram I am running a processor temperature monitor. It does not appear to be overheating. I do not have virus. The PC freezes and reboots. I do not think it is software related, because it will reboot if it is doing nothing. Could it be the power supply? Might i need to replace it? How do I diagnose this? Is this the kind of question that is appropriate here? I am not sure.

  Read the article

• How can I tell if my live web-server is overloaded?

  - by Nick G

  We have a live webserver which doesn't seem to be performing all that well. It's a Dell PowerEdge machine, a few years old (dual core, 4GB) which is hosting about 20 low-traffic websites. However it doesn't seem to be as fast as it used to be. How can we determine the cause of this? If it's website traffic, I would be expecting high CPU but CPU usage is quite low and hovers around the 15-30% mark except for very brief periods. I'm wondering perhaps, if rather than CPU performance being a problem, perhaps it's disk thrashing due to the constant read/writes of all the small web files and database queries. It has 4x 7200 RPM SATA drives in RAID 5. So is there a way to check that it's not disk thrashing?

  Read the article

• Restoring Dell recovery disks while preserving Linux partition

  - by Flup

  I have a Dell laptop dual-booting to Windows 7 and Linux. I have through my own stupidity royally stuffed the Windows partition. I have the set of recovery DVDs that I created when I first got the laptop, and I've successfully booted from them in a VirtualBox VM and ended up with a fresh (albeit virtualised) installation of Windows 7. When I started the recovery process, there was mention of other partitions being preserved, but it was unclear as to whether non-NTFS partitions would survive the process. The question is: can I run the recovery procedure without risking my Linux partition?

  Read the article

• SQL Server 2005/2008 Licensing Decision

  - by Hakim

  Hello, I have purchased a dedicated server from a reputable Hosting company. They only have Windows Server 2008 OS installed on it and NO Sql server. Server Configuration is Intel Dual core Processor with 2GB of RAM and 100GB HDD. I wanted to host my web services on that server which will be using the MS SQL Server 2005 at the backend.There are multiple web services and each using a different Database. Microsoft has CAL basis Licensing , Which I understand is based on number of users accessing the database directly ( I may be wrong ) . But my users will be accessing the webservice and no direct connection to the database as such. Yes but the number of users accessing the web server cannot be known and is not under my control. Which Licensing is best suited for this kind of setup ? I don't need analysing and BI services right now ,but i may want to upgrade that in future may be. Any help will be appreciated. Thanks

  Read the article

• mpstat on slackware 13.0 shows no utilization

  - by conartist6

  As the title says, the mpstat command, executed on Slack 13.0 continuously shows almost no processor utilization of any sort. In fact none of the output ever seems to change at all. The system is dual processor board with two hyperthreaded P4 Xeons. Any ideas? 08:50:06 PM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s 08:50:06 PM all 0.38 0.00 0.03 0.03 0.00 0.00 0.00 99.56 1510.46 08:50:06 PM 0 0.50 0.00 0.05 0.10 0.00 0.01 0.00 99.33 11.90 08:50:06 PM 1 0.32 0.00 0.03 0.01 0.00 0.00 0.00 99.64 0.00 08:50:06 PM 2 0.38 0.00 0.03 0.01 0.00 0.00 0.00 99.58 0.00 08:50:06 PM 3 0.29 0.00 0.02 0.00 0.00 0.00 0.00 99.68 0.00 This is, literally, the only output I can get from the program. No values change ever.

  Read the article

• Linux cannot see Windows 7 partitions on install

  - by Nash0

  I've been trying to install Linux as a dual boot with Windows 7 on my Dell latitude e6510. It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux. The issue I'm having is that when I run Linux installers by boot from CD they see the entire hard drive as unallocated space. I have tried Ubuntu 10.10, Kbuntu 10.10 and Fedora 14 and they all have the same problem. I have also tried the Ubuntu "install in Windows" option and could not get it to work. EDIT: Booting Gparted 0.8.0 from a usb drive did not work. It reported the entire drive as unpartitioned.

  Read the article

• Windows 7 Install command prompt can't access the C drive

  - by theouteredge

  I'm trying to create a new Windows 7 Professional VHD which I can dual boot to, following Scott Hanselman's guide to creating a bootable VHD. When I get to the command prompt in the Windows 7 installation and try to create a VHD or select/attach a pre-created VHD file I get an error saying that diskpart can't find the path specified. If I try and switch to the c drive using cd c: I see c:\ x:\something\> I already have a Windows 7 Ultimate install and my C drive is an SSD – if that makes a difference.

  Read the article

• Nagios: Is it possible to have multiple IPs for a host?

  - by Aknosis

  In our office we have dual WAN setup, if our cable connection drops we still get connectivity via our T1. The only issue is that our office network is no longer available on the same IP so all Nagios check go critical because they can't connect. What'd be awesome is if I could have Nagios try IP 1 by default but if for some reason its failing on that IP try IP 2. I doubt this is possible with a default install but I'm wondering if there is any add-ons or some other magic that could make this work?

  Read the article

• Logitech USB keyboard driver not found on Windows 7 x64

  - by AngCaruso

  I have a Logitech Internet 350 Keyboard which has been working fine on my Lenovo T400 laptop for well over three years. Just within the past week or so, Windows 7 can no longer find the driver for it. There is no custom driver from Logitech for this device -- it uses the generic Windows USB HID driver. The keyboard works just fine from the BIOS (and Linux which I dual boot this machine), but Windows 7 cannot find or load the driver for it. Any ideas? I smell a Windows update problem, but have no idea how to fix it, and I really am not interested in rolling back updates. New Info: I just tested a generic Dell USB keyboard and it worked just find, with Windows immediately recognizing the device and installing the HID keyboard class driver. So, it seems that Windows has decided not to recognize my specific Logitech keyboard device. I still suspect a Windows update issue, but I would love to hear other suggestions.

  Read the article

• Can I delete the OEM partition on the new Dell XPS 15?

  - by timepilot

  My new Dell XPS 15 L521X just arrived. I need to set this up to dual boot Linux. Sadly, the system comes with four primary partitions. I can't do a clean install at the moment, so one of the partitions will have to be deleted before I can install Linux. The layout is as follows: OEM: 39mb Hibernation: 8gb OS: 457gb Recovery: 12gb Obviously, I can't delete the Hibernation and OS partitions (will shrink to make space for Linux) and I'd like to keep the recovery partition if possible. So my question is what is on the small OEM partition? What functionality will I lose if I delete it?

  Read the article

• Swappable hard-drives for laptop

  - by lacqui

  I am bringing my old laptop for recycling, and removed my hard drive beforehand. The drive is a 320GB SATA drive, which is the same as my current laptop's drive. I would like to be able to easily swap between the two drives, in order to dual-boot that way. My laptop (Toshiba Satellite A500) needs a tiny Philip's screwdriver to get at the hard drive bay. I would like to replace that with something that is more easily changed, while still allowing the hard drive to rest on the desk. It can stick out a bit due to the laptop's feet, but not too far.

  Read the article

• Git multi-master, is it possible?

  - by Fran

  Hi, Is it possible to set a dual master GIT repositories? I would like to set up two different servers which I could push and commit to and changes on any of them would be propagated to the other. I've googled for it, but the most similar solution I've found is Gerrit2, but it does only one way replication (master - master). Does anybody know if this is even possible to do with git? If so, could you please tell me which tools to use? Thanks in advance.

  Read the article

• Dell Inspiron 530 - SSD Worth it?

  - by DrFredEdison

  I'm going to be upgrading my Dell Inspiron 530 (2.0 Ghz Intel Dual Core CPU, 3 GB RAM) to windows 7 soon, and rather than backup and reformat my existing drive, I'm planning on getting a 2nd drive to replace my current primary, and moving it to a secondary. Thus, this seems like an excellent time to get a solid-state drive, if its going to be worth it. As far as I can tell this machine has a SATA-I controller, and I'm unsure if I'll see a noticeable performance increase with an SSD without going to SATA-II. So I have a three part question here given all that: Will spending the money on a SSD be worth it if hook it into a SATA-I controller? Is it reasonable to upgrade the controller on this machine to a SATA-II controller? Given that this PC is kind of old to begin with, am I better off performance wise to just stick with a faster HDD?

  Read the article

• WindowsXP+7 on C:/D: :moving the System Partition

  - by user938921

  I had installed Windows 7 on a separate 20gig partition, and I'm absolutely loving it! Plus I can now dual-boot, with my original WinXP residing on the C: drive. But I'm running out of disk space on D:, and I was able to shrink C: and expand D:. But now I would like to make D: not just a Boot Partition, but an Active System Partition, without losing my ability to boot into Windows 7 (since it was created on a separate D: partition, not the current Active System C: Partition). Any advice?

  Read the article

• Resolution of monitor is not supported by motherboard

  - by Sandesh

  I have Desktop with configuration Pentium 4,945 intel chipset board,dual booting with win 7 and ubuntu 10.10 (no graphics card) Recently i purchased Dell IN2020M 20" with native resolution of 1600x900 but my display allow maximum of 1024x768 because of this when i play any video in full screen mode it doesn't play smoothly or frames are refreshed jerkily I have tried updating my VGA driver but its doesn't helping me much. Is there any way to solve this problem ? 1if i want to replace monitor what maximum resolution should i buy ? 2if i want to upgrade(graphics card/motherboard) my desktop what is the minimum configuration to support the current system. Thanks in advance

  Read the article

• Restore Windows 7 Upgraded Computer

  - by Karl

  I have a laptop that came with Windows Vista and I purchased an upgrade to Windows 7. I upgraded the computer to Windows 7. Now I am selling my laptop and would like to restore the laptop to Windows 7 original without my files. I would also need to wipe all partitions as I dual booted Ubuntu on another partition. How do I preserve my license? What are the steps I need to take? Thank you superusers for your help!

  Read the article

• Windows 7 Boot Loader - Remove 30 second waiting time

  - by derekhh

  I've installed Fedora 17 and Windows 7 on two different hard disks as a dual-boot system. The default boot loader is GRUB 2 maintained and configured in Fedora 17. When I startup and choose "Windows 7 bootloader (on /dev/sda1)" in GRUB 2, Windows 7 boot loader will appear, with only Windows 7 as the only choice and also the default operating system, with a 30 second waiting time if no input is detected. I'm trying to see if it is possible to remove this 30-second waiting time. I've tried to follow the instructions on the Web by configuring default operating system in the control panel but seems there is something wrong with it. I've also tried to use "bcdedit enum /all" but still receives error prompts. Update: Added my boot tab screen in msconfig.

  Read the article

• Windows 7 install crashes

  - by Alan Whitelaw

  I have a strange case that I cannot install windows 7 or windows vista on my 3 year old PC. The machine is an MSI K9NGM, with an AMD AM2 processor. I have bought a new Samsung SATA drive to install Windows 7 on, so as to preserve my existing XP install which I intend to dual boot in the future. However about half way through either a vista or w7 install (just after the mouse is shown for the first time, after the first restart) the machine will crash with a blue screen. I have removed, reordered the memory in the machine, with no luck. Does anyone have any experience of why this would happen with BOTH vista and w7 when everything is fine with XP?

  Read the article

• how to record videos from my laptop webcam?

  - by Nick

  I am not sure but I can't seem to turn on my webcam to record videos which I would broad cast somewhere later on. I have a HP G62 Laptop, and the cam turns on when I use programs like Skype and other Video Calling clients, other wise I can't turn it own, as I don't seem to know how. Laptop: HP G62 Notebook PC, AMD Atholon II P230 Dual-Core, Windows 7: Home Premium Can some one tell me how do I turn on my webcam and record videos? Or is there some sort of a software? I tend to read stuff I wrote in Word, so if there is a program I need it to be in the tray dock and not to bug me, while I am moving between different documents/web pages.

  Read the article

• RCA monitor won't display highest resolution when NVidia drivers are installed

  - by novellterminator

  My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

  Read the article

• Virtualbox: Raw linux partition not booting

  - by abalter

  I have a dual-boot laptop with Windows 7 and Ubuntu 12.04. I am trying to boot the ubuntu partition from windows using Virtualbox. I have successfully created the .vmdk, and created the virtual machine. However, I can't get it to boot (in Virtualbox). All I get is a black screen with the cursor in the top left. I wonder if I'm specifying the partitions correctly. My Ubuntu install has 3 partitions: \, \boot, \home. No swap partition. These are all in Disk 0, partitions 3,4,5 respectively. The command I used to create the .vmdk is: VBoxManage internalcommands createrawvmdk -filename C:\Users\abalter\.virtualbox\ubuntu.vmdk -rawdisk \\.\PhysicalDrive0 -partitions 3,4,5 Then I create a virtual machine based on that .vmdk. Why won't it boot?

  Read the article

• Memory works fine separately, but not together

  - by patersonjs

  I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

  Read the article

• Build Advise for Home Web/NAS Server with Ubuntu Server 12.04 [closed]

  - by razor7

  I need to have a personal Webserver with NAS capabilities. The Webserver to test some LAMP projects I develop for clients, and also NAS to be able to stream media to local network. I want to have full control of the box, so I'm planning to build it with some spare parts and Ubuntu Server. The services/software that will run are (remember, is for personal and testing use only): SAMBA/CIFS SSH Server Apache 2 MySQL 5 Mercurial Repo PHP 5.3 Ruby on Rails OwnCloud Dovecot Webmin Postfix PureFTPd ClamAV The Hardware: Intel Dual Core E2180 2.0 GHz MSI P35 Neo Kinkston 1GB DDR2, 667 MSI Nvidia 7300le PCIe x16 256mb RAM HDD SATA WD Green 2TB x2 (RAID-1 with MDADM RAID Controller) 16 GB USB Pendrive (For server system installation) My idea is to build this system, using the pendrive for the Ubuntu Server software, and packages, and the RAID-1 for gross data storage. What do you think? Thanks a lot!

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >