Search Results

Search found 2866 results on 115 pages for 'benjamin dell'.

Page 14/115 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• continuous hard disk access - slowing down my machine

  - by suresh

  I find from the hard disk access LED on the front of my machine that the hard disk is being accessed more often and probably because of that, my machine is quite slow. The machine becomes unresponsive even when the load as seen from w command is around 1 or so. My desktop is optiplex 360 dell machine running Ubuntu 10.04. My questions are: How to quantify hard disk access and how to see if it is more than "normal" ? If it is more than normal, what are my solutions ? thanks suresh

  Read the article

• Enter / Return key stops working

  - by andygrunt

  I have a Dell Latitude E5400 laptop running Windows 7. Everything runs fine on it for days then I suddenly notice the enter/return key is no longer working e.g. I could be writing an email, press enter for a new line but it doesn’t ‘register’ – so no new line. I thought it might be some dirt under the key perhaps so I tried running the Windows onscreen keyboard but the Enter key on that doesn’t work either. A reboot always fixes the problem but it’s a pain. Any ideas a) how to fix it and b) out of interest, is there some other key combination that I can use as an alternative to using the Enter key when I need to?

  Read the article

• servers connected to a poweredge 6248 receive traffic for their 'neighbours'

  - by Hannes

  In the network we have a few vlans but at the moment I was investigating vlan2 which carries the most traffic. When tcpdumping on the eth0.2 interface, I see a lot of packets arriving which are not addressed to, nor coming from the server. I checked this on several servers in the network and they all have the same issues. In short, our switches don't switch the traffic but threat it like they are a hub. Can you tell me what settings on the dell poweredge 6248 should prevent this behaviour?

  Read the article

• Enter / Return key stops working

  - by andygrunt

  I have a Dell Latitude E5400 laptop running Windows 7. Everything runs fine on it for days then I suddenly notice the enter/return key is no longer working e.g. I could be writing an email, press enter for a new line but it doesn’t ‘register’ – so no new line. I thought it might be some dirt under the key perhaps so I tried running the Windows onscreen keyboard but the Enter key on that doesn’t work either. A reboot always fixes the problem but it’s a pain. Any ideas a) how to fix it and b) out of interest, is there some other key combination that I can use as an alternative to using the Enter key when I need to? UPDATE: Thanks to CarlF's suggestion, I tried exiting running programmes and found it seems to be a problem with PhraseExpress.

  Read the article

• Can't Remote into Windows Server

  - by Brian

  Hello, I have a Dell server wired into the router. I was able to connect to it with my laptop (laptop is wireless) before my router died. My verizon router went kaput, and I got everything else back up and running on the wireless network other than the remoting in feature, even though I can access the server through windows explorer just fine. Any ideas why? What do I need to check? UPDATE: Interesting scenario, Network Discovery is off; I turn it on and save, but for some reason, even after that, network discovery is turning itself off... no idea why that is happening? Thanks.

  Read the article

• How do I get wireless working on a Dell Inspiron 510m?

  - by user17449

  Why WiFi don't work in my Dell Inspiron 510m with Ubuntu 10.04? Is that usefull? inspiron@Inspiron:~$ rfkill list all inspiron@Inspiron:~$ sudo lshw -C network [sudo] password for inspiron: *-network:0 DISABLED description: Wireless interface product: PRO/Wireless LAN 2100 3B Mini PCI Adapter vendor: Intel Corporation physical id: 3 bus info: pci@0000:01:03.0 logical name: eth1 version: 04 serial: 00:0c:f1:5b:5d:40 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ipw2100 driverversion=git-1.2.2 firmware=712.0.3:3:00000001 latency=32 link=no maxlatency=34 mingnt=2 multicast=yes wireless=unassociated resources: irq:5 memory:fcffe000-fcffefff *-network:1 description: Ethernet interface product: 82801DB PRO/100 VE (MOB) Ethernet Controller vendor: Intel Corporation physical id: 8 bus info: pci@0000:01:08.0 logical name: eth0 version: 81 serial: 00:11:43:41:d8:b8 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A ip=192.168.0.2 latency=32 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10MB/s resources: irq:11 memory:fcffd000-fcffdfff ioport:ecc0(size=64) inspiron@Inspiron:~$ iwconfig wlan0 wlan0 No such device inspiron@Inspiron:~$ ifconfig -a eth0 Link encap:Ethernet Endereço de HW 00:11:43:41:d8:b8 inet end.: 192.168.0.2 Bcast:192.168.0.255 Masc:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet Endereço de HW 00:0c:f1:5b:5d:40 BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) IRQ:5 Endereço de E/S:0xe000 Memória:fcffe000-fcffefff lo Link encap:Loopback Local inet end.: 127.0.0.1 Masc:255.0.0.0 endereço inet6: ::1/128 Escopo:Máquina UP LOOPBACK RUNNING MTU:16436 Métrica:1 pacotes RX:628 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:628 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:0 RX bytes:50104 (50.1 KB) TX bytes:50104 (50.1 KB) inspiron@Inspiron:~$ nm-tool NetworkManager Tool State: connected - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: ipw2100 State: unavailable Default: no HW Address: 00:0C:F1:5B:5D:40 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: e100 State: unmanaged Default: no HW Address: 00:11:43:41:D8:B8 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: off inspiron@Inspiron:~$

  Read the article

• Dell Management Packs in System Center Operations Manager 2007 R2?

  - by bwerks

  Hey all, I recently set up SCOM in a small business network environment. The root management server is a Dell Poweredge 2950, and I'd like to use SCOM to monitor it using Dell's management packs. I've imported the management packs into the SCOM deployment and followed Dell's installation instructions, but it doesn't seem to be fully working yet. Currently, the Diagram views in the Dell tree (Monitoring tab) seem to show me the server's place in the network topology, so it seems that at least part of it is working. However, none of the reports under "Performance and Power Monitoring Views" provide any information. When clicking on one of them (Power Consumption (Watts), for instance), the display area is blank and there is a tooltip visible that reads "No performance counter is selected. To select a counter, place a check mark in the Show column in legend below." However, in the legend, there's nothing there for me to check. I've installed OpenManage 6.2 on the server as per the Dell documentation, but I don't know what else I could have done that I missed. Does this sound like a familiar problem to anyone?

  Read the article

• After a week of smooth running, my Dell t310 servername reverted to the service tag and screwed everything up!

  - by user779887

  Has this happened to anyone else? Began having a tremedous amount of problems with our brand new Dell SBS 2011 T310 server and after nearly 15 hours will Dell support, they determined that the server name hade reverted to DXXXXXXXX ("D: + the service tag). The Dell tech said that this was a major major problem. I'm the only person with any access to the machine and I didn't attempt to change the server name. The tech said it didn't look as if anyone had hacked the box but something had replaced "OurCompanyServer" with "DXX12XX" It would seem to me, simply changing the server name back to what I originally had would correct the problem, but the Dell tech said it wasn't that easy. Anyone encounter this?

  Read the article

• Lubuntu wireless issue with Broadcom chipset

  - by Variant Web Solutions

  I'm a web dev that just started a new venture in buying wiped laptops in bulk and selling them at a low cost to lower income families that want a laptop that will simply preform and not become virus ridden and require constant maintenance, so naturally I opted for a linux distro and after some research, lubuntu was my top pick. I'm not a stranger to linux as all of my servers for my web dev business are linux, but I am however new to L/Ubuntu and I'm having some issues with both wifi (broadcom chipsets) on the 20 or so dells that I have right now, D800's, D810's and E5400's. Not sure if you can point me in a solid direction, I've scoured (and implemented) the suggestions on ask ubuntu and still coming up short. On one of the e5400's ( though they all seem to suffer the same errors) I got the following: [code]dell-latitude-e5400@dell-Latitude-E5400:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. dell-latitude-e5400@dell-Latitude-E5400:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10) dell-latitude-e5400@dell-Latitude-E5400:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.5-1ubuntu1 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm nfc dell-latitude-e5400@dell-Latitude-E5400:~$ [/code]

  Read the article

• How do I toggle the wifi hardware switch for a Dell XPS 17 L702X?

  - by Sparhawk

  Every now and then, I disable my wireless via the menu icon in Ubuntu. Then, when I try to enable the wifi, it tells me that "wireless is disabled" or "wireless is disabled by hardware switch". There is a red icon on the F2 key that looks like a wireless icon, and in Windows, pressing the (red) Fn key and F2 toggles the wifi. This does not work in Ubuntu, leaving me no clear way to turn wifi back on. How can I restart wifi in Ubuntu?

  Read the article

• How to monitor RAID in Solaris 10 x86 on PowerEdge 2650 with PERC 3/Di

  - by cope360

  I have a PowerEdge 2650 with the PERC 3/Di RAID controller. The OS installed is Solaris 10 8/07 U4. Currently RAID is configured through the BIOS and it works fine, but I have no way to monitor the status of the drives. Is there a command to show me the status of the drives? Drivers I need to install?

  Read the article

• How to configure SCSI hard drives and RAID for Poweredge 2850 web server

  - by Saul

  I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

  Read the article

• Disable "System Memory Testing" via OMSA 6.4.0

  - by EGr

  Is it possible to disable system memory testing via OMSA 6.4.0? I can only find ways to do it using newer versions of OMSA; and I can't even see the setting in 6.4.0. I have quite a few machines that I want to disable this (BIOS) setting on, but I don't want to have to install the new OMSA and reboot. My intentions are to disable the setting so that when the systems are rebooted in the future, they don't need to go through the system memory testing. If it is possible to disable this another way, without OMSA or manually changing the BIOS settings, I would be open to that as well.

  Read the article

• Suggested RAM for inspiron 1720

  - by sososo

  I have a inspiron 1720 with 2gb ram, what kind of ram should I buy, I want to get 4gb. i'm running windows 7 on it. Do I have to buy 4gb or should there be empty slots? Any links would be appreciated, I want to get an idea of the $ involved to see if its worth it. I am hoping it will make it substantially faster!

  Read the article

• Dell fumbles OpenManage installation process, forgets to write documentation?

  - by bwerks

  Hi all, I'm setting up a Dell PowerEdge 2950 for a small business, and I've just spent a while with Dell OpenManage Server Administrator 6.2, trying to clear the installation process of errors before I execute it. Right now I'm getting the following warning from the installer. The installer has detected that the HTTPS listener is not configured for Windows Remote Management. You can either configure the HTTPS listener before installing Remote Enablement, or install Remote Enablement now by selecting the "Custom" installation screen and configure the HTTPS listener later. See the "Remote Enablement Requirements" section in the "Dell OpenManage Installation and Security User's Guide" for information on configuring the HTTPS listener. Note: Remote Enablement is required to manage this system from a remote Server Administrator Web Server and is applicable only for those systems that support Server Instrumentation. Click here to configure HTTPs Listener for Windows Remote Management. The italicized line is a link, which executes...something...via cmd, and doesn't seem to help the problem. Not knowing exactly what to do here, I consulted the documentation. I read through the Setup and Administration section of the User's Guide, but all that it contained was a weird primer on role-based security and some SNMP stuff. The next section skips installation entirely and moved on to features of the suite. Thinking myself crazy, I consulted the readme, which told me that for installation I should consult the "Dell OpenManage Installation and Security Version 6.2 User's Guide" which not only doesn't exist in the documentation, but also not in all of google? Soo yeah, if anyone is familiar with this problem, drop me some knowledge!

  Read the article

• Does anyone know the touchpad disabling driver for Dell xps 14?

  - by rkar

  I accidentally deleted my Dell xps 14 touch pad disabling driver and I don't know where to find it and reinstall it. I have already tried Dell support and without luck (I don't want to install something that I don't know). Would anyone please send me the link to that driver To clarify: There is this Fn shortcut key used to disable/enable touch pad in Dell xps14 and when press it orange light on touch pad will lit and touch pad will stop working. But after deleting the driver that responsible for that function,it stopped working. My service center is almost 600 miles away and he said that he forgot to add it last time he fix my laptop. Since the internet connection at his place is slow,he can't send me from mail either.So can anyone send me the link for that driver. Since I don't really know about drivers it would be really nice if some one show me the driver name or link. Sorry,here is my laptop service tag "C37KWL1".I don't know how to find the specific driver for that function key.My dell has a short cut for disabling touchpad with picture on it along with the other multimedia short cut key with picture. since xps 15 and 17 have seperated touch key instead of on function keys mine have to choose function key or multimedia key through setting.To be honest my service center tech guy forgot to install it when he repair it and can't send me the file(which is about over 20mb or something according to him)for some reason.All i need is that particular file.

  Read the article

• How would you apply a BIOS update for a Dell M610 blade with VMware ESXi installed?

  - by Guamaniac

  Hello, all. We've got a Dell M610 blade with VMware ESXi 4 installed and we need to update it's BIOS to the latest version. Unfortunately, Dell only makes available a Windows (.exe) and Linux (.bin) versions of the BIOS update program (as well as a bootable DOS floppy version that is too big to fit on a 1.44MB floppy!). We've tried using various "LiveCD" versions of linux distributions but keep running into errors. Anyone out there with experience with Dell blades who could give us a hint or two to get this working? Thanks a lot, in advance. Joe

  Read the article

• How do I replace the screen of a Dell Ispiron 1545?

  - by Ajus10

  I got a new screen for a Dell Inspiron 1545. The old screen says Dell Inspiron 1545 LP156WH1 (TL)(C1?) HD and the new one says Dell Inspiron 1545 LP156WH1 (TL)(C1?) LCD Does that make a difference? All I can get to work on the new screen is the backlight. The old screen had a crack. Now when I plug the old one in, it will not turn on at all. Could I have blown the inverter or messed up the cable?

  Read the article

• How do I replace the screen of a Dell Inspiron 1545?

  - by Ajus10

  I got a new screen for a Dell Inspiron 1545. The old screen says Dell Inspiron 1545 LP156WH1 (TL)(C1?) HD and the new one says Dell Inspiron 1545 LP156WH1 (TL)(C1?) LCD Does that make a difference? All I can get to work on the new screen is the backlight. The old screen had a crack. Now when I plug the old one in, it will not turn on at all. Could I have blown the inverter or messed up the cable?

  Read the article

• Dell whitepaper on PowerEdge R810 R910 and M910 Memory Architecture

  - by jchang

  The Dell PowerEdge 11 th Generation Servers: R810, R910 and M910 Memory Guidance whitepaper seems to have caused some confusion. I believe the source is an error in the paper. In the section on FlexMem Bridge Technology, the Dell whitepaper says this applies to the R810 and the M910. The Dell M910 is a 4-way blade server for the Xeon 7500 series processor line. First a breif recap. The R810 is a 2-way server, by which I mean it has two sockets regardless of the number of cores on each processor....(read more)

  Read the article

• Why I LOVE Dell

  - by Robert May

  We recently ordered a laptop for an employee.  It was delivered yesterday and we realized it had no web cam and wasn’t the 1080p resolution.  He wasn’t happy. So, this morning, I sent an e-mail to our rep and asked him what we could do.  Within an hour or two, he called me, arranged a replacement laptop with the corrected specs, set up a return and had everything arranged and charged us only for the difference.  No pain, no silly questions.  We won’t loose use of the laptop either.  The return and the new laptop will overlap so that we can just pack up the old laptop in the box of the new one, slap some labels on and away we go. This has been my experience with Dell over the past 10 years.  Their corporate service has always been fantastic, and it’s made me a huge fan.  Keep up the good work, Dell! Technorati Tags: Dell

  Read the article

• Hulu desktop stopped working on my Dell

  - by jwdinkc

  After last weeks flash update Hulu desktop no longer works on my Dell laptop though it still works on my HP Desktop. Here's what CLI tells me on the Dell: Inspiron-1564:~$ huludesktop Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory I tried: sudo apt-get install libvdpau_nvidia.so but got E: Unable to locate package libvdpau_nvidia.so and E: Couldn't find any package by regex 'libvdpau_nvidia.so' Hulu does work through the browser and through XBMC. XBMC just doesn't seem to match the video quality of the Hulu Desktop. I don't really know why a nvidia.so is needed for my Intel graphics that comes on Dell Insiron 1564's. anyway. So, do you guys have a solution?

  Read the article

• Getting Service Tag from Dell Machine using .net?

  - by JonH

  Hello folks I've got a class that pulls model information (hardware info) for a local machine code is like so: Imports System.Management Public Class clsWMI Private objOS As ManagementObjectSearcher Private objCS As ManagementObjectSearcher Private objMgmt As ManagementObject Private m_strComputerName As String Private m_strManufacturer As String Private m_StrModel As String Private m_strOSName As String Private m_strOSVersion As String Private m_strSystemType As String Private m_strTPM As String Private m_strWindowsDir As String Public Sub New() objOS = New ManagementObjectSearcher("SELECT * FROM Win32_OperatingSystem") objCS = New ManagementObjectSearcher("SELECT * FROM Win32_ComputerSystem") For Each objMgmt In objOS.Get m_strOSName = objMgmt("name").ToString() m_strOSVersion = objMgmt("version").ToString() m_strComputerName = objMgmt("csname").ToString() m_strWindowsDir = objMgmt("windowsdirectory").ToString() Next For Each objMgmt In objCS.Get m_strManufacturer = objMgmt("manufacturer").ToString() m_StrModel = objMgmt("model").ToString() m_strSystemType = objMgmt("systemtype").ToString m_strTPM = objMgmt("totalphysicalmemory").ToString() Next End Sub Public ReadOnly Property ComputerName() Get ComputerName = m_strComputerName End Get End Property Public ReadOnly Property Manufacturer() Get Manufacturer = m_strManufacturer End Get End Property Public ReadOnly Property Model() Get Model = m_StrModel End Get End Property Public ReadOnly Property OsName() Get OsName = m_strOSName End Get End Property Public ReadOnly Property OSVersion() Get OSVersion = m_strOSVersion End Get End Property Public ReadOnly Property SystemType() Get SystemType = m_strSystemType End Get End Property Public ReadOnly Property TotalPhysicalMemory() Get TotalPhysicalMemory = m_strTPM End Get End Property Public ReadOnly Property WindowsDirectory() Get WindowsDirectory = m_strWindowsDir End Get End Property End Class Any possibility to get a service tag from WMI ? From the client side form I display values like so: Dim objWMI As New clsWMI() With objWMI Debug.WriteLine("Computer Name = " & .ComputerName) Me.Label1.Text = "Name: " & .ComputerName Debug.WriteLine("Computer Manufacturer = " & .Manufacturer) Me.Label2.Text = "Manufacturer: " & .Manufacturer Debug.WriteLine("Computer Model = " & .Model) Me.Label3.Text = "Model: " & .Model Debug.WriteLine("OS Name = " & .OsName) Me.Label4.Text = "OS Name: " & .OsName Debug.WriteLine("OS Version = " & .OSVersion) Me.Label5.Text = "OS VERSION: " & .OSVersion Debug.WriteLine("System Type = " & .SystemType) Me.Label6.Text = "System type = " & .SystemType Debug.WriteLine("Total Physical Memory = " & .TotalPhysicalMemory) Me.Label7.Text = "Memory: " & .TotalPhysicalMemory Debug.WriteLine("Windows Directory = " & .WindowsDirectory) Me.Label8.Text = "Win Directory: " & .WindowsDirectory End With

  Read the article

• There are lots of "Core i" CPUs, but Dell only offers a few -- who builds systems with the others?

  - by Jesse

  Passmark shows many varieties of Core i3, i5, and i7 cpus. Some of them, even at similar prices, are much faster than others. But Dell only offers a few options, and they're not the fast ones. For example, Dell offers the Core i5 650 (benchmark), which costs $220, and doesn't come close to the performance of the Core i3-2100 (benchmark), which costs $120. Does anyone sell systems with the faster, cheaper chips?

  Read the article

• There are lots of "Core i" CPUs, but Dell only offers a few -- who builds systems with the others? [closed]

  - by Jesse

  Passmark shows many varieties of Core i3, i5, and i7 cpus. Some of them, even at similar prices, are much faster than others. But Dell only offers a few options, and they're not the fast ones. For example, Dell offers the Core i5 650 (benchmark), which costs $220, and doesn't come close to the performance of the Core i3-2100 (benchmark), which costs $120. Does anyone sell systems with the faster, cheaper chips?

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >