Search Results

Search found 3084 results on 124 pages for 'lan'.

Page 14/124 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• WOL for Asus M5A97 built in Realtek Network Adapter

  - by madphp

  I cant get wake on lan to work for my built in network adapter. Its a ASUS M5A97 motherboard, and the network adapter is a Realtek PCIe GBE. I have Shutdown WakeOnLan - Enabled Wake on Magic Packet - Enabled Wake on Pattern Match - Enabled WOL & Shutdown Link Speed - 10 Mbps First I have set up a magic packet client to listen, and the packet is getting through. I have also checked these in Power Management for the network adapter. Allow the computer to turn off this device to save power Allow this device to wake the computer Allow a magic packet to wake the computer.

  Read the article

• Firewall behind firewall

  - by Makach

  I've recently changed jobs and I've been set up with a new workstation. On all previous places where I've been working they've had some sort of local firewall installed on each and every workstation - but here I've been told not to activate it because it is not necessary since we're already behind a HW Firewall. To me this seem a bit naïve, but I cannot emphasise it. I always thought a local firewall was good practice, ie. if something managed to come through the hw firewall there might be a slight chance other computers on the lan would block the internal threath. We got free access to internet and we got a virus checker installed.

  Read the article

• We have no SW Firewall behind our office HW firewall, admin says its not req'd

  - by Makach

  I've recently changed jobs and I've been set up with a new workstation. On all previous places where I've been working they've had some sort of local firewall installed on each and every workstation - but here I've been told not to activate it because it is not necessary since we're already behind a HW Firewall. To me this seem a bit naïve, but I cannot emphasise it. I always thought a local firewall was good practice, ie. if something managed to come through the hw firewall there might be a slight chance other computers on the lan would block the internal threath. We got free access to internet and we got a virus checker installed.

  Read the article

• Sleep/Suspend and WOL on FreeNAS

  - by Timothy R. Butler

  I am trying to figure out how to get FreeNAS 8 to sleep when inactive and, ideally, wake on lan activity (or, less ideally, wake on a WOL magic packet). However, as I've tried to search for information on how to do this, almost all discussions seem to be centered on FreeNAS 7. Also, the tools included in FreeBSD to do this seem to be missing (i.e. acpiconf, etc.). Is there a way to get FreeNAS 8 to sleep and wake so that I don't have to leave the server running all the time? Given its usage level, it seems a waste to have the server running constantly.

  Read the article

• Remote call script as administrator

  - by drupality

  I created a Windows XP bat script to modify etc/hosts file. I want to share this script at other machine, then from another computer I want to invoke these script to modify hosts file at first computer (via LAN). I need some example. I didn't find any example. Is this possible? I try: runas/user:username block.bat On the same machine login as guest but it doesn't work. No errors just "Attempting to call block.bat" and end of invocation. As admin script works ok. Could someone give me any advice?

  Read the article

• Cookies blocked by router?

  - by Martin wiboe

  Hello, My friend has a D-Link DI-524 router that she uses for her home broadband. It's a pretty vanilla setup with the standard firewall settings, DHCP enabled etc. However, recently she has experienced something strange - cookies are not working on every computer on her LAN, whether using FF3.5 or IE8. I tried viewing the HTTP traffic using Fiddler2, and the requests come through fine (mind you, Internet browsing still works flawlessly) but whenever a website tries to set a cookie using the "Set-Cookie:" header, my computer sees that line as "Set-*ookie:" with the cookie contents removed. I have never seen anything like this - do you have any idea? Regards, Martin

  Read the article

• Two NIC cards with the same metric - Internet traffic going out the wrong one

  - by bvanderw

  I have two NIC cards in my computer - one is connected to our corporate network and the Internet, the other is connected to a private LAN through a Linksys WRT54G. Both cards use DHCP. This was never an issue with Windows XP, but with Windows Vista (and Windows 7) the metric for the 0.0.0.0 route is the same (20), and it appears that some network traffic that should go out my main network card are going out my secondary card instead. The solution to date is to delete the 0.0.0.0 route associated with the second NIC card, but I have to do this several times a day. Is there a better solution? --Bruce

  Read the article

• Share the DVB card on windows 7

  - by Bashar Kernel

  I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

  Read the article

• ssh all machines behind a router

  - by Luc

  Hello, I have several machines on my lan. One is used as a http proxy to target web sites located on the others (that's working fine now thanks to ServerFault). On my router, Port 22 is NATed to this proxy machine. I would like to be able to access the other machines, within internet, with something like: ssh user@first_machine.my_domain.tld ssh user@second_machine.my_domain.tld Could I use the proxy machine to 'filter' the incoming ssh request and to route them to the correct machine ? (in the same way it's possible to do so for web sites using a mix of mod_proxy and namevirtualhost in Apache) Thanks a lot, Luc

  Read the article

• How to force a host to not send a broadcast for an IP address in its own subnet?

  - by Bruce

  For a LAN, instead of a switch, I have built a topology where each machine is connected to a router. Each host is assigned an IP address from 10/8. Here are the interface details: Lets say I ping 10.16.0.3 from this host. The routing table of 10.16.0.2 has been configured to use the router (10.16.0.1) as the default gateway. But since the destination IP address (10.16.0.3) is in the same subnet it sends out an ARP broadcast. I want to disable this behavior of sending an ARP broadcast and instead force it to use the routing table. How do I accomplish this?

  Read the article

• Is it possible to use Logmein to connect to a sleeping (Mac) computer on a wireless network?

  - by jaydles

  I'm using logmein to access my Mac. So I have the local logmein app running on my MacBook Pro, which is on my home wireless network. I access it either from the website (www.logmein.com) or the Logmein Ignition Apps on the iphone or ipad. My problem is that I have to set my MacBook Pro to not sleep at all when plugged in to make this a practical solution, because logmein cant seem to wake it up. I did change the settings in System Preferences to allow "Wake from Lan", but it seems like this won't work with a a Wifi connection. Am I missing anything? Assuming I'm not, is it bad for my computer to basically leave it running and not asleep most of the time?

  Read the article

• Dropbox alternative with local sync support?

  - by srid

  I am currently using Dropbox. Just decided to sync my huge (about 5 GB) iTunes Library (music collection) in Dropbox. For that I must subscribe to their paid account. But before I do so, I'd like evaluate the alternatives. Is there an alternative that does this? Local LAN sync (eg: sync my huge music collection across computers in local network without uploading/downloading them to internet) The following would be nice (but not required): Native android client - so music will be made available in the Android music app / SDHC card Selective sync: sync particular folders / exclude certain folders on certain computers .. eg: excluding porn folder on work computers ;-) Just like Dropbox, it MUST work on 64-bit Windows, Linux and Mac. Know of any? (I am currently evaluating Spideroak. Boy, was it so complicated to use?)

  Read the article

• Need assistance setting up Linux Router with 2 public lans

  - by user195407

  I was assigned a.b.c.10/30 (Public IP) for my router and given a.b.c.9 as the gateway. I was also assigned x.y.z.128/25 (Public IP block) for my use. I want to setup a Linux router to handle this situation. My Linux box has 3 NICs, eth0 is a.b.c.10, eth1 I have assigned x.y.z.254, eth2 is unused at present. I have eth1 connected to a network switch, and several devices connected. Let's say box A is x.y.z.129 with a gateway of x.y.z.254. I have not connected to the network yet, as it is not live. What settings do I need to make, beyond adding the 2 network definitions to the cards and having "route add default gw a.b.c.9 eth0"? I may add a private 192.168.100.0/24 lan to eth2 later.

  Read the article

• Which way should we choose to shorten backup time?

  - by facebook-100005613813158

  A company performs a full backup for its data in a daily basis for disaster recovery purposes. However, their backup process cannot be completed within the assigned backup time window. What would you recommend to this company about how to restructure its backup environment in order to minimize the backup time? We got 4 candidates, 1. Perform LAN based backup 2. Weekly full backup and daily incremental 3. Weekly full backup and daily cumulative 4. Add more ISL to increase bandwidth when comparing incremental backup with cumulative backup ,incremental backup time is surely shorter than cumulative backup time .But I don's know adding more ISL is allowed in an existing storage system,or can this operation really shorten backup time ?

  Read the article

• Ideas for home media server with Dell laptop?

  - by Warlax

  Hi guys, We have an old Dell Inspiron laptop we don't use anymore and would look to turn it onto a media/backup server for music/pictures - and maybe documents/code. The laptop only has 40Gb of HD space but we can hook to it a USB external HD with an additional 80Gb. This is a very general question: - What OS should I put on it (more like, what flavor of Linux)? - What media/backup server software should I install on top of that? - How would you go about backing up to it? I need to back up computers on the same LAN, some have Windows, some OS X, some Linux. If you could point me to an all-in-one solution with a nice tutorial for non-sysadmin folks it would be greatly appreciated, thank you!!!

  Read the article

• Automatically wake up notebooks not on the ethernet

  - by gletscher

  I am looking for an automated backup system and I like bacula. I have 3 Notebooks and a Desktop computer that need regular backup. Now I don't want to let them run all night just to do the backuping, so I was thinking I could use wake-on-lan to have bacula wake up the machines, then do the backups, and shut them down afterswards. While this may work with devices on the ethernet, it won't work with the Notebooks on the wifi. So is it possible to have the Notebooks schedules to automatically wake up from suspend or shutdown ? Or is it possible to interject a shutdown command if it is after a certain hour and call the bacula director to start the backup now? I'm new to controlling the linux system using scripts, so any hints on how and where to start are greatly appreciated. Thanks alot for your help, input and ideas.

  Read the article

• CSS, JS and images are not loading while sharing WAMP over local network

  - by Hardik Thaker

  I have share my wamp over my personal LAN . (Server IP : 192.168.0.100) When I am trying to access wamp server it's working perfectly. But when I open website hosted on server using client machine (192.168.0.103) , it doesn't load CSS - Images and JS files. So I saw console and found that my browser is trying to load : localhost//mysite/css/style.css And failing to load resource. now when I try to load the same resource directly from browser using 192.168.0.100/mysite/css/style.css It's showing me css file ! Now I am confused how to solve this problem so that my browser load that css perfectly ! Please help me ! thanks in advance !

  Read the article

• MAC to IP binding in ASA 5510 / SG 300-52

  - by Sampsa

  I am trying to configure a Cisco ASA 5510 to assign specific IP-addresses to specific MACs. Firmware on my ASA is 8.2(5). I have used this feature in our previous device (Cisco SA-520W). I have also read that this feature is (not yet) implemented. How do I work around this problem, if not by direct assignment? Do I need to specify fixed IP's on concerned devices themselves? I also have a SG 300-52 switch for our LAN. We cannot specify IP-addresses to ports, because we have further switches down the line. Thank you for your help!

  Read the article

• Web Server with phpMyAdmin

  - by Kumar P

  We have web development company, We using RHEL 5 as local (proxy) server with few windows XP client machines. Now i want to make my Server machine as Web Server ( LAN only ), with mysql and phpMyAdmin. I installed httpd,php,mysql by yum. How to install phpMyAdmin ? And Where i want to installl ? Now i want to make my client machines can create php files in web folder, Also use mysql and phpMyAdmin. How can i do it ? Give me clear steps to do it .

  Read the article

• localhost name error with linux machines

  - by coderex

  Hi, CASE 1: I have a Ubuntu machine with name midhun.local I can access this in http://midhun.local/svn ... But its can't access from other machines(both Windows and Linux) through this host name. But it works with http://192.168.1.192/svn CASE 2: I have a another machine(windows) having the host-name myname:555 In this case i can access https://myname:555/svn from other windows machines with the same URL. But if am trying to access from the a Linux machine it will not work with the same URL instead of that https://192.1.168.111:555/svn will work. How can I solve the problem. I need to access via the same name from cross domain. How is it possible in LAN Thanks in advance!!

  Read the article

• Wake computer from sleep/standby without BIOS support for WOL?

  - by jjeaton

  Just bought a new home server and the nice folks at HP disabled the Wake-On-Lan feature in my motherboard. Are there any other options for waking the computer from Sleep/Standby mode? I'd like to take advantage of power savings wherever I can. I realize that I won't be able to wake it from shutdown, short of putting together some Rube Goldberg machine. EDIT: I'd like to be able to wake the machine on demand, remotely. So I can then RDP into it, or access files, etc.

  Read the article

• solving network connection problem on xp

  - by doug

  Hi there I feel so stupid, because I have to fix my dad computer(which was mine years ago). So it is an old computer on which I have installed windows xp and the drivers for main-board. The device manager says that I have no more problems with the hardware. That computer has to connect to a router from my room but it doesn't. On ping 192.168.2.1 I get "Request time out"., The other computers are connecting to that router. Only the old computer doesn't connect to the LAN and later to the internet. Also it doesn't get a good IP(from the same class). After running ipconfig command I know that i have an IP with 169.... What can I do? Do you have any tips for me?

  Read the article

• Share the DVB card on windows 7 [closed]

  - by Bashar Kernel

  I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

  Read the article

• How do I get my 192.168.* Linux server accessible via http://hostname/?

  - by rfrankel

  (Sorry if this question isn't worded well and/or is duplicate. I'm not a networking guy and I'm probably not using the right terms...this also makes it hard to see if this has already been answered.) I'm running a CentOS server in VirtualBox, Windows host, and I can see access Apache-hosted pages at http://192.168.1.109/ from machines on my LAN. But what I'd like is for people to be able to type http://hostname/ ...both because it's easier and primarily because I'm not sure that local IP is static. I'm not really sure how to proceed - could someone point me in the right direction? Thanks.

  Read the article

• Separate 2 networks with 1 Windows Server

  - by SamuGG

  The situation is: I have 1 router 192.168.1.1, 1 switch, 1 windows server and a basic LAN of devices accessing it. I need to split into 2 separate LANs with full Internet access each, but isolated from each other. Given that, the server is a Windows Server 2008 R2 with 2 NICs: NIC1: 192.168.1.2 NIC2: 192.168.2.2 The router has no dhcp configuration. Please, can anyone explain gracefully, step by step, what do I need to do? What would be the 2 NICs full configuration? What services do I need to install? I don't want devices on either network to see devices on the other network, they must be completely separate. I guess I'm missing the routing procedure step, but I have no idea how is that done. For example: tell the server that devices with gateway 192.168.2.2 must send traffic for internet to 192.168.1.1 router. Thanks in advance.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >