Search Results

Search found 1240 results on 50 pages for 'sam carleton'.

Page 14/50 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Cisco 800 series won't forward port

    - by sam
    Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

    Read the article

  • Sync OneNote Notebooks to/on SkyDrive

    - by Sam
    I've got OneNote running on all computers in our house, using it all the time with several people and computers. The only drawback: I want to keep the copies of OneNote in sync without having to run a dedicated server myself. Right now one of my computers has a folder share, where all others sync to, but this is highly impractical since the computer is not always running. So my question is: is it possible to put the notebook files on a (private) SkyDrive Folder and have all the computers sync to there? This way all computers could keep in sync whenever they got access to the web. Can this be done? and, of course, How? [Update] Maybe I should not have taken knowledge about OneNote as granted: OneNote uses a propietary file format, but has a very good in-file-syncing, working on network shares. Generic 'just sync the complete file' won't be useful at all, because I'd just have 'file has changed on server and on client' conflicts all the time. The sync needs to know OneNote files and be able to sync the content - eg. OneNote itself needs to sync the files, not some generic sync tool.

    Read the article

  • IIS 7.0 Web Deploy authentication fails after changing Windows password... help?

    - by Lucifer Sam
    I have a very basic Windows 2008 R2 Web Server running IIS 7.0. This is just a test/practice server, so I enabled Web Deployment using Windows Authentication. All was well and I was able to deploy easily from VS 2010 using the Administrator account credentials. After changing the Administrator account password, I get the following error when trying to deploy from Visual Studio (using the new password, of course): Error 1 Web deployment task failed... ...An unsupported response was received. The response header 'MSDeploy.Response' was '' but 'v1' was expected. The remote server returned an error: (401) Unauthorized. If I change the Administrator password back to the original one and try to publish using it everything works fine again. So what am I missing? Am I supposed to do something in IIS after changing the password? Thanks!

    Read the article

  • MOSS 2007 - Solution deployment never successful

    - by Sam
    We cannot get any solutions to deploy to a MOSS 2007 environment. We are also attempting to install solutions from a SharePoint vendor - their installer is reporting the solutions are already deployed. This doesn't appear to apply to our farm: http://social.technet.microsoft.com/Forums/en-US/sharepointadmin/thread/4f1b3aaf-7173-4151-874b-5740bff4b14f We could not find that path location anywhere our any of our MOSS servers (CA, WFEs, etc).

    Read the article

  • Setting empathy's idle time

    - by Sam Bisbee
    Hello - I'm using Empathy for IM on Ubuntu 10.04. In every IM client I've used since the '90s there's always been a way to set "idle me after X time", at which point it would set you as being away. Empathy seems to do this, but I haven't found a place to specify how long to wait before marking me as away. Am I missing a plugin or something in the settings? Is this somehow tied in with Gnome and the power setting's idle time? (I'm using a laptop.) Cheers.

    Read the article

  • SQL instance through F5 BigIP VIP

    - by Sam
    We have a SQL 2008 instance Server01\instance02. The port is set to 1466. We've set up a VIP named Server1 Attempting to connect to Server1\instance02 does not work. Server1,1466 does work. We have ports 1433, 1434 and 1466 open. Can we configure this to be able to use the name without any changes to the SQL client. Thanks!!

    Read the article

  • How do I install OpenStack on a single Ubuntu 12.04 node?

    - by Sam Edwards
    I'm having trouble installing OpenStack in Ubuntu 12.04, for various reasons: The official Ubuntu website recommends Juju and MAAS. However, this is a single node I am trying to get OpenStack installed on, and MAAS requires "two or more nodes" according to the docs. Additionally, I don't have any experience in MAAS and Juju and would rather stick to technologies I am more familiar with so that I can debug problems that arise. I have tried StackGeek but this fails because the node only has a single Ethernet port. The node does, however, have the second hard drive required for the nova storage. I have tried DevStack but cannot log into the dashboard. The login form appears fine, but as soon as I try to submit the page, my browser begins loading indefinitely. I have tried installing straight from packages, but I get an Internal Server Error in the dashboard upon trying to log in, with no helpful logs anywhere in sight to aid me in debugging the issue. Each of these attempts was with a fresh Ubuntu 12.04 LTS setup; I'm finding it really strange that no matter what I try, I cannot get OpenStack installed. Is this even a stable/mature project? Why am I encountering so many bugs?

    Read the article

  • Copy Windows 7 environment running on external drive to a new HDD partition on a Mac?

    - by sam
    My PC has just given up on me. It's getting a bit old so I took the HDD out and bought a Mac. I've put the PC's HDD into an enclosure, plugged it into the Mac and dragged across most of my files. I've got a couple of programs that are PC-only that I have to run from time to time, so I'd like to make a partition on the Mac and have Windows 7 installed there. I know how to set up a clean version of Windows in Boot Camp. Is there an easy way to copy over the environment on the HDD to the Mac's partition? I don't really need all the stuff on the PC, just the operating system. Is there a better way to do this other than having to deactivate Windows, then reactivate it on the Mac? I have a free upgrade to Windows 7 from Vista, thus I have an upgrade disc, not the full disc.

    Read the article

  • ESXi Server with 12 physical cores maxed out with only 8 cores assigned in virtual machines

    - by Sam
    I have an ESXi 5 server running on a 2-processor, 12-core system with hyperthreading enabled. So: 12 physical cores, 24 logical ones. On this server are 4 Windows 7 VMs, each configured for 2 processors, each running VMware Tools. Looking at my stats in vSphere, my "core utilization" is constantly maxed out. Yes, these machines are working hard, but only 8 cores have been allocated. How is this possible? Should I look into reducing the processor count per machine as in this post: VMware ESX server? I checked to ensure that hardware virtualization is enabled in the BIOS of the machine (a DELL R410). I've also started reading up on configuration, but being a newbie there's a lot of material to catch up on. It also seems I should only bother with advanced settings and pools if I'm really pushing the load, and I don't think that I should be pushing it with so few VMs. I suspect that I have some basic, incorrect configuration setting, but it's also possible that I have some giant misconceptions about virtualization. Any pointers? EDIT: Given the responses I've gotten so far, it seems that this is a measurement problem and not a configuration problem, making this less critical. Perhaps the real question is: How does the core utilization of the server reach a higher percentage than all individual cores' core utilization, and given that this possibility makes the metric useless for overall server load, what is the best global metric for measuring CPU load on hyper-threaded systems?

    Read the article

  • How do you configuring vlans/trunk on a Cicso ASA 5510

    - by Sam Sanders
    I have a Cicso ASA 5510 that I want to connect to 2 Dell PowerConnect 5500 linked in a Switch Stack. I want to connect a trunking line to each switch so if one switch dies the other works. The problem is I can't seem to do anything thing with vlans on the 5510 using the "Cisco ASDM 6.4 for ASA" . Do I need to use CLI for this, or is it just not possible? I'm new at networking so any advice would be helpful.

    Read the article

  • How to blacklist a problem wifi access point by MAC address in OSX

    - by Sam Alexander
    So I am a small mac-user cog in a larger windows-based network machine. The network here works fine for most everyone else (on PCs), but I have random timeouts and issues with the Wifi. Luckily, I have identified a few problem access points by MAC address (via their log messages in Console.app). Is it possible to tell my Airport on my Macbook to avoid those access points, and only speak with the access points who are far less touchy about me drinking the Apple kool-aid? All of the points are on the same network SSID.

    Read the article

  • Set up DNS or F5 VIP to send traffic to a specific port

    - by Sam
    I have a clustered SQL instance set up at SERVER01\dev08 It's assigned to a static port of 1466. Can I set up something which will let users connect to SERVER01 and hit that port? If this is possible, what problems might it create (all traffic coming to this name hitting only one port)? It seems that DNS has nothing to do with ports - nor does the F5 big IP.

    Read the article

  • SNMP based network discovery (switches), device (ports on switches) power management

    - by SaM
    In a enterprise network, what would be the right way to generate a list of switches (SNMP managed) Is it reasonable to ask the organization to supply a list such as this: Switch name IP Address of switch Location SNMP community strings Or are there standard ways to run discovery scans - UDP broadcasts? After having generated a repository such as the above; given a single switch, how to query it for the list of all devices attached to it? Finally, how to selectively power down/power up ports? (remotely - using SNMP) Platform is going to be .NET based (C#) and the library being used is SharpSNMP

    Read the article

  • Ubuntu whois package and request limits

    - by Sam Hammamy
    I'm writing a django app with a form that accepts an IP and does a whois lookup on the discovered domain names. I've found the Ubuntu package whois which I plan to call from a python subprocess, and read the stdout into a StringIO, then parse for things like Registrar, Name Servers, etc. My question is, it seems that there are many paid whois services, which means that there must be a reason why people don't just use this Ubuntu package. I'm wondering if there's a request limit on the number of requests from a single IP to the package's whois server? I will probably be making 250 domain lookups per IP or maybe more. Also, I've found that some domains aren't searchable: qmul.ac.uk is searchable kat.ph is not searchable ahram.org.eg is not searchable Any particular reason for that?

    Read the article

  • Tomato OS: "memory exhausted" running vi .... how to solve?

    - by Sam Jones
    I have set up tomato (shibby) on an asus RT-N66U router. It works great. I loaded up a few pieces, like transmission and optware. I can run vi, but when I run vi it fails with a "memory exhausted" error, and the terminal session hangs. For reference: If I simply start "vi" it runs fine. But if I specify vi I get the memory exhausted error, even if the file I am opening is just a couple of hundred bytes in size (like fstab). I discovered that my swap partition was not properly set up, so I did that. The swapon command now indicates I really do have a swap: [root@MyRouter samba]$ swapon -s Filename Type Size Used Priority /dev/sda1 partition 32900860 0 1 How can I get vi to work? Thanks! System setup reference information: asus RT-N66U router 2TB usb hard drive partitions on hard drive: Disk /dev/sda: 2000.4 GB, 2000398839808 bytes 255 heads, 63 sectors/track, 30400 cylinders Units = cylinders of 16065 * 4096 = 65802240 bytes Disk identifier: 0xfacbc8ab Device Boot Start End Blocks Id System /dev/sda1 1 512 32900868 82 Linux swap / Solaris /dev/sda2 513 29000 1830638880 83 Linux running samba memory: $ cat /proc/meminfo MemTotal: 255840 kB MemFree: 210980 kB Buffers: 5264 kB Cached: 22768 kB SwapCached: 0 kB Active: 20272 kB Inactive: 11448 kB HighTotal: 131072 kB HighFree: 99868 kB LowTotal: 124768 kB LowFree: 111112 kB SwapTotal: 32900860 kB SwapFree: 32900860 kB Dirty: 0 kB Writeback: 0 kB TIA!

    Read the article

  • Unable to establish remote access to workplace pc windows 7

    - by sam
    I am successfully connected to my workplace via vpn. But when I try to connect to my pc via remote desktop it keep asking for credentials even I am providing the right one. This works fine in windows xp but unable to connect using win 7. Also after establishing a vpn I lost my internet access. Any idea.

    Read the article

  • Server high memory usage at same time every day

    - by Sam Parmenter
    Right, we moved one of our main sites onto a new AWS box with plenty of grunt as it would allow us more control that we had before and future proof ourselves. About a month ago we started running into issues with high memory usage at the same time every day. In the morning an export is run to export data to a file which is the FTPed to a local machine for processing. The issues were co-inciding with the rough time of the export but when we didn't run the export one day, the server still ran into the same issues. The export has been run at other times in the day since to monitor memory usage to see if it spikes. The conclusion is that the export is fine and barely touches the sides memory wise. No noticeable change in memory usage. When the issue happens, its effect is to kill mysql and require us to restart the process. We think it might be a mysql memory issue, but might just be that mysql is just the first to feel it. Looking at the logs there is no particular query run before the memory usage hits 90%. When it strikes at about 9:20am, the memory usage spikes from a near constant 25% to 98% and very quickly kills mysql to save itself. It usually takes about 3-4 minutes to die. There are no cron jobs running at that time of the day and we haven't noticed a spike in traffic over the period of the issues. Any help would be massively appreciated! thanks.

    Read the article

  • Make IE stop asking me to install adobe flash player

    - by Sam
    I don't have adobe flash player installed, and don't miss the flashing ads a bit. The only thing that annoys me: IE8 keeps asking me "this web site wants to install Adobe Flash Player", and I want to get rid of this question. I don't want to install it, not now, not ever. So how do I make IE stop asking me about it?

    Read the article

  • SQL Server Rights to backup drive

    - by Sam
    I'm trying to copy a backup I've made from one server to another using either an SSIS or Powershell step in a job. I've run into the same error on both systems when running the step under the sql agent. I receive errors that the path does not exist. I've tried granting the agent rights to e:\backups, where the file is located, but it still doesn't work. When I use a proxy for the step, it works fine. Can anyone help me with what permissions to grant to sqlagent? Rights look to have been granted to MSSQL$Instance1 on the backup drive.

    Read the article

  • Authenticating Mountain Lion over Ubuntu 12 LDAP [closed]

    - by Sam Hammamy
    Possible Duplicate: Ubuntu OpenLDAP and Mac OS X Roaming Profiles I've installed slapd on Ubuntu 12 after a long long day of trial and error. I've added the apple.ldif schema, and the samba.ldif schema, plus a test user. Last week, I had installed slapd on Ubuntu 11, and was able to authenticate against it from OS X Lion after finding the following blog post: Fixing OpenLDAP Authentication on OS X Lion This suggests running the following commands to fix the authentication problem /usr/libexec/PlistBuddy -c "add ':module options:ldap:Denied SASL Methods:' string CRAM-MD5" /Library/Preferences/OpenDirectory/Configurations/LDAPv3/yourldapserver.plist /usr/libexec/PlistBuddy -c "add ':module options:ldap:Denied SASL Methods:' string NTLM" /Library/Preferences/OpenDirectory/Configurations/LDAPv3/yourldapserver.plist /usr/libexec/PlistBuddy -c "add ':module options:ldap:Denied SASL Methods:' string GSSAPI" /Library/Preferences/OpenDirectory/Configurations/LDAPv3/yourldapserver.plist However, I ran these commands on OS X Mountain Lion, and I am still unable to authenticate. I can't even use the Directory Editor app to examine the AD. I am however able to bind to the server via python-ldap's ldap.simple_bind_s('cn=admin,dc=foo,dc=net,'secret'). The error I am getting when trying to use Director Editor is Error Code (5000)

    Read the article

  • using monit to restart custom daemon

    - by Jenis Sam
    I wrote a php daemon using system daemon pear class. How do I use monit to restart it when it fails? I have the following code in my monit config file: check process merge with pidfile /var/www/merge/merge.pid group 1000 start program = "/etc/init.d/merge start" stop program = "/etc/init.d/merge stop" IF CHANGED PID then restart My goal is solely if the daemon fails (stops running because of an error), I want monit to make it start running again.

    Read the article

  • HDD vanished after wakeup from standby

    - by Sam
    In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

    Read the article

  • vista wireless adapter not working

    - by Sam Adams
    After this script gets called http://blogs.technet.com/b/heyscriptingguy/archive/2008/09/29/how-can-i-enable-or-disable-my-network-adapter.aspx 50 times over a 12 hour span, disabling wireless/enabling wired, followed by enabling wireless/disabling wired, the wireless adapter stops finding connections entirely, even if it is enabled, needing a reboot. vista, powershell 1.0 (for some reason vista is not accepting powershell 2 for an update), 32 bit, intel R pro /wireless 3945ABG adapter. Any reasons why, thanks.

    Read the article

  • How do I tell Apache which PHP to use?

    - by Sam McAfee
    I am running Apache2 on a Mac OS X (10.5). I just compiled PHP 5.2.8 and finally got pdo-mysql working (or so I think). My command line "php --version" is showing 5.2.8 and I have the right modules installed. But, when do a phpinfo(), Apache dumps out PHP 5.2.6 (my earlier version, without pdo_mysql). How do I tell Apache which PHP to load? The httpd.conf has the line: LoadModule php5_module libexec/apache2/libphp5.so But, I don't know what or where that is. Is that what I have to change?

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >