Search Results

Search found 6887 results on 276 pages for 'internal'.

Page 140/276 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

• When using RAID10 + BBWC why is it better to separate PostgreSQL data files from OS and transaction logs than to keep them all on the same array?

  - by Vlad

  I've seen the advice everywhere (including here and here): keep your OS partition, DB data files and DB transaction logs on separate discs/arrays. The general recommendation is to use RAID1 for OS, RAID10 for data (or RAID5 if load is very read-biased) and RAID1 for transaction logs. However, considering that you will need at least 6 or 8 drives to build this setup, wouldn't a RAID10 over 6-8 drives with BBWC perform better? What if the drives are SSDs? I'm talking here about internal server drives, not SAN.

  Read the article

• Bound external Cisco CIGESM ports to a specific BladeServer

  - by Vinícius Ferrão

  We have an IBM BladeCenter with 14 blade servers and one external Cisco CIGESM for Ethernet connectivity. Since this hardware is a little old, we will use it for other services, and we want to run a pfSense instance on one of the blades. It's just an Firewall Appliance, but it needs two network interfaces: one for the WAN and the other one for LAN access. Our architecture works on top of static routes, we don't use NAT, so we got the WAN IP in one interface routing to the another one. The main problem is how to plug the WAN cable in one of the four external ports and make it exclusive to the blade server containing the firewall. And we also need an exit port that goes through a 3COM 4200G switch that makes the internal routing and VLAN separation. Thanks in advance

  Read the article

• Detecting damage done by virus

  - by user38471

  This morning after I went to college, a virus infected my PC without any user interaction at my end. When I came home my computer was completely frozen and infected with lots of trojans. I have not typed anything important since returning so keys cannot be logged. However I want to know exactly when my computer crashed from the time of infection to see what could potentially be done remotely by a hacker. The virus my pc was diagnosed with was "fakespypro" on a fully updated Windows 7 installation with firewall enabled. My computer was connected to an internal dorm room network, so probably that has had to do something with it. Any further information about how I could backtrace this virus infection or ways to discover what data might be stolen would be greatly appreciated.

  Read the article

• phpbb behind a reverse proxy

  - by asciitaxi

  Hi, i've got a django app running on apache behind an nginx reverse proxy. Nginx takes requests on port 80 and forwards them to apache on 127.0.0.1:81. This works fine. Now I want to run phpbb on apache under /forums. My problem is that when phpbb does a redirect, it seems to redirect to the internal apache port, rather than port 80. So, for instance when I first go to http://my-dev-server/forums to configure php bb, it immediately redirects to http://127.0.0.1:81/forums/install/index.php. Is there something I need to do in nginx/apache/phpbb config to get it to redirect to the external port? Thanks very much!

  Read the article

• How to block spam site republishing my content

  - by Fo.

  I noticed today that Google search results shows some spam copies of one of my sites. The url looks something like this: http://[subdomain].spamsite.com/www.example.com ...where example.com is my site. In my Apache access logs I'm noticing several lines like the following whenever I load the above url: 127.0.0.1 - - [219/Oct/2012:19:27:34 +0000] "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)" The spammer's site shows an exact up to date copy of my site, so I think they are pulling in live data. Any idea how I can block this traffic?

  Read the article

• SharePoint Designer not syncing consistently

  - by normalocity

  I've got a user who uses SharePoint Designer to maintain an internal intranet site. When syncing (remote-to-local) it appears to work at first, but usually hangs about 2-3 minutes into the sync, when he's syncing it to a sub-folder of his "My Documents". In this case, his "My Documents" is stored on a network share/profile. When I do the same thing, it works for me. The difference? My "My Documents" folder is locally stored. In other words, he's syncing from the remote server, into a network share. I'm syncing from the remote server, into a local drive. Any idea why having the sync destination on a network share, vs. a local drive would cause this? When it locks up, we can navigate to his "My Documents" folder still - so I don't believe that we're loosing connection to his drive - unless perhaps the connection is intermittent, and SharePoint Designer isn't re-trying the sync.

  Read the article

• curl XPUT returning HTTP 500 error message

  - by pradeepchhetri

  I have added the following changes in nginx configuration. server { listen 8080; root /usr/share/nginx/www; client_body_temp_path /tmp/; dav_methods PUT DELETE MKCOL COPY MOVE; create_full_put_path on; dav_access user:rw group:rw all:rw; } I have my nginx configured with --with-http_dav_module also. But when I am trying to running the command: $ curl -XPUT http://172.16.31.127:8080/test.html -d 'test' I am getting 500 Internal Server error. Can anyone help me out in solving this.

  Read the article

• WordPress - Open Link in New Windows Default

  - by ninjaboi21

  Hey SuperUsers, is it possible to make some sort of change or add a plugin that allows me to make every 'external' link open in a new window? Just an example: if my blog was called http//timmy.com/ and I wanted to link to http//tom.com/, it would open a new window instead of the same window, but I wanted to link from http//timmy.com/ to http//timmy.com/somewhere/ in the same window. So I want all external link from my website to another in a new window/tab, but I want every internal link, from my website to somewhere else on my website, to be in the same window/tab. Is this possible?

  Read the article

• Best way to deploy my node.js app on a Varnish/Nginx server

  - by Saif Bechan

  I am about to deploy a brand new node.js application, and I need some help setting this up. The way my setup is right now is as follows. I have Varnish running on external_ip:80 I have Nginx behind running on internal_ip:80 Both are listening on port 80, one internal port, one external. NOTE: the node.js app runs on WebSockets Now I have the my new node.js application that will listen on port 8080. Can I have varnish set up that it is in front of both nginx and node.js. Varnish has to proxy the websocket to port 8080, but then the static files such as css, js, etc has to go trough port 80 to nignx. Nginx does not support websockets out of the box, else I would so a setup like: varnish - nignx - node.js

  Read the article

• Plesk directory structure problems

  - by johnnietheblack

  I have an entire website with the following directory structure: /example.com /html (public) /css /js index.php /lib session.php other_lib_files.php /views index.php /models /controllers As illustrated, the html is public, and anything above it is private. My site now needs to upgrade servers, and the new server (Linux w/ Plesk) has the following structure (reduced to the problematic parts below): /myplesksite.com /httpdocs /css /js index.php /private /lib /models /views What I would THINK is that I should be able to put my /lib, /views, /models, etc in the directory directly above /httpdocs, the same way I had it in my previous server. Is that possible? Or do I have to put it in private? I would really love not to have to adjust my internal paths throughout the site if not necessary...

  Read the article

• AFP AD ACL permissions issues with external drive

  - by AlanGBaker

  Mac OS X Server 10.4.11 connected to an AD domain system serving AFP shares to Mac OS X 10.5.8. If I create a share on the the internal RAID of the server with an ACL that allows RW to all ("Domain Users"), then it works, but a share created identically on the external RAID appliance (Drobo v2) doesn't. When the share from the Drobo is mounted, it shows no sign that it has any ACLs associated with it: neither in the Finder (Get Info), nor when checked via the terminal with "ls -lae". The Drobo does show that the ACLs exist when I ssh into the server and check it there, but when the clients mount that share, they just... ...disappear. Any thoughts?

  Read the article

• Finding a private (NAT) host's IP using historic destination data

  - by l0c0b0x

  The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

  Read the article

• Is it really necessary to call /bin/sync twice before an unmanaged power-off?

  - by Jeremy Friesner

  Hi all, My company sells an "embedded device" which is implemented as a headless Linux box with ext4 on an internal SSD. Some of our users have a habit of doing a "save current settings" on this box, and then cutting power to the unit as soon as the unit reports that the save completed (ie two seconds later). This was causing occasional corruption of the saved files, as the data wouldn't always get flushed to the SSD before the power went out. So I tweaked my software to run /bin/sync immediately after writing the file (after closing the file handle but before notifying the user that the save completed). This appears to fix the issue, but my coworker says that one call to /bin/sync isn't sufficient, and that to be really safe I ought to run /bin/sync twice in a row. That sounds like paranoia to me... Perhaps a habit from earlier versions of Linux or unix whose sync utility didn't work reliably. Does his advice have merit, or should one call to /bin/sync suffice?

  Read the article

• TCP/IP performance tuning under KVM/Qemu

  - by vpetersson

  With more and more companies switching to public cloud services, I'm curious what you guys' thoughts are on TCP/IP tuning in the cloud. Is it worth bothering with? Given that you don't have access to the host-server, you're somewhat limited I presume Let's say for the sake of the argument that you're running three MongoDB-servers in a replica-set on FreeBSD or Linux that all sync over an internal network. I'd also be curious if anyone made any actual performance benchmarks to back up their arguments. I benchmarked the various network drivers available for KVM/Qemu here, but I'm curious what the gurus here suggest to tune further. I started playing around a bit with the tuning-recommendations as suggested over here, but interestingly enough I saw a decrease in performance, rather than an increase, but perhaps I didn't fully understand the tweaks. Update: I did a few more benchmarks and posted the result here. Unfortunately the result wasn't really what I expected.

  Read the article

• Is it safe to run an operating system from an USB flash drive?

  - by Georg

  I've got a laptop that has a broken harddisk controller. Replacing the motherboard is quite expensive. I thought about buying a flash drive and installing & running the system from it. However, I'm concerned about some things. Speed: Are they fast enough for swap memory (I've got only 1GB RAM installed.) I'm considering buying 2 or 3 of them and making them into a RAID. What about limited write cycles? How long will it last for a system that has a filesystem with journaling enabled? I'd hate to abandon it. Are there significant differences between internal SSD which are used in modern laptops like MacBooks and USB flash drives? What should I expect in 10 years when the memory wear starts kicking in?

  Read the article

• Installing isolated instance of MySQL on Windows using silent install with .msi

  - by Abram

  I'm trying to write an installer for an internal application we wrote. After it installs our application it then installs MySQL using the .msi installer in silent mode. I specify the install dir and data dir to that of a directory within my application's install directory, such as: msiexec /i @@MYSQL_INSTALLER_FILE@@ /qn INSTALLDIR="@@INSTALL_DIR@@\MySQL\" DATADIR="@@INSTALL_DIR@@\MySQL\" USERNAME="@@DB_USER@@" PASSWORD="@@DB_PASS@@" (the @@variable@@'s are replace by my installer routine using InstallJammer) Once installed, I use mysqld.exe to install a windows service with a custom service name and defaults file like so: mysqld.exe --install CustomMySQL --defaults-file="@@INSTALL_DIR@@\MySQL\my.ini" This works fine as long as there is not already another instance of MySQL installed. If there is it silently fails to install MySQL. Running the msi installer manually (double-click) shows an error that a previous version is already installed and just aborts. Is there a way to automate installing MySQL as an isolated instance, regardless of whether another version/instance is already installed?

  Read the article

• Windows 2008 Domain Controller - Backup (BDC) to Primary (PDC)

  - by Klaptrap

  I have created a new domain controller with my single domain forest. I have also made it DHCP and DNS ready - all 3 services have synchronised with the existing W2K8 domain controller. I even migrated the FSMO roles and thought everything was fine. Indeed all machines on network appear to obtain DHCP and DNS from new server and the AD is working on the new server as my internal website uses it for login authentication. I have just noticed, via BgInfo - Sys Internals - that the new server is showing as "backup" and the old as "primary" - I thought I had already achieved this. Have the FSMO roles swapped back - as I have yet to have removed the old server from AD (dcpromo). Do I need to do anything before I run dcpromo on the old server? Any thoughts appreciated....

  Read the article

• once VPNed into pfSense, unable to hit the public URLs of my websites - they are routed to the pfSense box

  - by Sean

  I have a pfSense box setup as the firewall/router/VPN appliance at my colo. Once I VPN into the colo (either pptp or openvpn, pptp preferred due to multiple clients and ease of configuration), I am able to hit all my servers by their private 10.10.10.x ip and am able to browse the public internet without issue. When I try and hit the URL of a domain hosted by one of my servers, I am prompted for credentials. If I login using the pfSense credentials, I'm connected to pfSense as if I'd used it's internal IP. If I hack my hosts file to point url - server private IP it works fine, but this is obviously not a good solution. To recap: not connected to VPN - www.myurl.com works connected to VPN - www.myurl.com never makes it to the correct server, but is sent only to the pfSense box I'm sure it's something small that I've missed in the pfSense config.

  Read the article

• how to debug mysql has gone?

  - by fefe

  I have a virtual machine(Ubuntu 12.04, MySQL 5.5) running under VMware and is dedicated to host a mysql server. I connect to this server on internal IP. I'm trying to find out why I get mysql server has gone error. One my windows machines apache it stops because of this issue. I have been trying to fine tune my mysql my.cnf with the following parameters but did not bring the desired result. # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 0.0.0.0 # # * Fine Tuning # wait_timeout = 180 key_buffer = 384M max_allowed_packet = 64M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 500 table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M how to debug this issue what is missing from configuration to avoid this error?

  Read the article

• Do two portforward rules translate to "and"?

  - by blsub6

  I just set up an Exchange server to replace my DeskNow mail server. I want to start testing my internet mail exchange of my Exchange server. I can only set the MX records on my DNS up to my one external IP address so I was thinking that I could set up a firewall rule on my internet-facing firewall that port forwarded the smtp packets to two different servers. My question is: If I do that, will that mean that the smtp packets will be forwarded to just the first internal IP on the list? Or does it mean that the packet will be cloned and sent to both IPs?

  Read the article

• Postfix + Cpanel compatibility

  - by Mishari

  I am working on a VPS that has cPanel installed and I wanted to install Postfix on it. However I find that cPanel seems to be quite tightly integrated with Exim. I have done a google search but have only found vague statements that says "cPanel does not support postfix" but I haven't found any authoritative sources in this matter. So my question is, what happens if I disable exim entirely and install postfix instead? Will it break cPanel? Will everything run as normal? Update with more questions: Can I leave Exim for cPanel's internal use and use postfix for everything else? If so, what will happen to dovecot?

  Read the article

• Exim: Change sender address when sending mails out of local network

  - by Esa Varemo

  We have a working exim setup at a site, where users can send and receive mails. We are trying to setup a server to send some warnings and errors using email to an address that is outside the local network. The problem is: The program that sends the mails sends them using the username it runs under and the local hostname of the server. This cause the mails to have a sender of format: [email protected]. Exim sends these mails to the ISP's SMTP server, which rejects the mails as they have an illegal or unverifiable sender (the internal address). I'm thinking I should configure exim to rewrite the sender when: - sender's domain is on the local network - receiver's domain is outside the local network I tried setting some kind of rewriting in the exim config, but did not manage to get it to work. I'd show what I have tried, but I ran out of time on the last visit to the site, and had to revert to the original version losing all the changes I tried.

  Read the article

• ZFS, dedupe and PST files

  - by Unreason

  I am interested to know what would be expected maximum dedupe ratio for a set of PST files. I have ~40G of pst files from ~15 usres with high level of duplication of attachments. I am running tests to see if I can have significant space savings if I store the data on ZFS with dedupe. For this purpose I have installed a test setup of Nexenta, but was wondering if someone here had already done this and what level of deduplication I might expect (or in another words how sensitive are pst files to block alignment and what are the parameters that can influence the ratio?). Initial test show very low dedupe ratio and I did find explanation that block level dedupe would not be efficient here and that byte level dedupe would be much better (and that it should be performed by application that is aware of internal organization), so I am just double checking here if someone have some more input. Otherwise I will probably be converting PST files to IMAP.

  Read the article

• Can Windows 8 boot from FireWire?

  - by Holli

  I read many times Windows 7 is unable to boot from an external FireWire drive but I wonder if Windows 8 is able to do so. I need to run Windows on my Mac but only very few times so my idea was to move it all to an external drive. I have one of the first Intel Macs so running Windows in a virtual machine is not really fun. The performance is just too poor. Adding a Boot Camp partition to my internal drive is also not possible at the moment.

  Read the article

• Automatically connect to 3G dialup connection

  - by Philipp

  I have a notebook with an internal 3G modem (a HUAWEI Mobile Connect) which appears to the system as a dialup modem. When I want to connect to the Internet, I need to open the charms bar, click settings, network, the modem and "connect" to open the dialup dialog on the desktop. When the connection is interrupted for some reason, I need to repeat these steps. Is there a way to configure Windows 8 to automatically (and preferably silently in the background) connect with this modem at system startup and automatically restore the connection should it get interrupted? As an operating system which is developed for mobile devices, I would expect it to be able to somehow be able to manage a always-on 3g connection.

  Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >