Search Results

Search found 6432 results on 258 pages for 'wireless adapter'.

Page 140/258 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

• Weird routing issue (updated)

  - by smccloud

  I just updated the route tables due to a mistake on my part. I am working on getting networking working correctly on a cluster of 14 virtual servers at a customer site. 11 of them work fine for routing and 3 don't work correctly for their administrative network (172.28.56.0). All are running Windows Web Server 2008R2. Default gateway is set on the production network (172.28.58.0) and not on the administrative network (handled with persistent static routes). On a working server, route print gives me the following (MACs redacted) =========================================================================== Interface List 11...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection 13...XX XX XX XX XX XX00 0c 29 85 b2 98 ......Intel(R) PRO/1000 MT Network Connection #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 15...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.28.58.1 172.28.58.11 266 10.18.1.22 255.255.255.255 172.28.58.1 172.28.58.11 11 10.32.0.0 255.255.0.0 172.28.56.1 172.28.56.201 11 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.28.34.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.42.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.56.0 255.255.255.0 On-link 172.28.56.201 266 172.28.56.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.56.201 255.255.255.255 On-link 172.28.56.201 266 172.28.56.255 255.255.255.255 On-link 172.28.56.201 266 172.28.58.0 255.255.255.224 On-link 172.28.58.11 266 172.28.58.0 255.255.255.224 172.28.58.1 172.28.58.11 11 172.28.58.1 255.255.255.255 172.28.58.1 172.28.58.11 11 172.28.58.11 255.255.255.255 On-link 172.28.58.11 266 172.28.58.31 255.255.255.255 On-link 172.28.58.11 266 172.28.60.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.63.0 255.255.255.0 172.28.56.1 172.28.56.201 11 192.168.0.0 255.255.0.0 172.28.56.1 172.28.56.201 11 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.28.56.201 266 224.0.0.0 240.0.0.0 On-link 172.28.58.11 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.28.56.201 266 255.255.255.255 255.255.255.255 On-link 172.28.58.11 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 172.28.56.0 255.255.255.0 172.28.56.1 1 172.28.63.0 255.255.255.0 172.28.56.1 1 192.168.0.0 255.255.0.0 172.28.56.1 1 172.28.60.0 255.255.255.0 172.28.56.1 1 10.32.0.0 255.255.0.0 172.28.56.1 1 172.28.34.0 255.255.255.0 172.28.56.1 1 172.28.42.0 255.255.255.0 172.28.56.1 1 0.0.0.0 0.0.0.0 172.28.58.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None On one of the non-working server, route print gives me the following (MACs redacted) =========================================================================== Interface List 11...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection 13...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.28.58.1 172.28.58.21 266 10.32.0.0 255.255.0.0 172.28.56.1 172.28.56.211 11 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.28.34.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.42.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.56.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.56.211 255.255.255.255 On-link 172.28.56.211 266 172.28.58.0 255.255.255.0 172.28.58.1 172.28.58.21 11 172.28.58.0 255.255.255.224 On-link 172.28.58.21 266 172.28.58.21 255.255.255.255 On-link 172.28.58.21 266 172.28.58.31 255.255.255.255 On-link 172.28.58.21 266 172.28.60.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.63.0 255.255.255.0 172.28.56.1 172.28.56.211 11 192.168.0.0 255.255.0.0 172.28.56.1 172.28.56.211 11 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.28.56.211 266 224.0.0.0 240.0.0.0 On-link 172.28.58.21 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 06 255.255.255.255 255.255.255.255 On-link 172.28.56.211 266 255.255.255.255 255.255.255.255 On-link 172.28.58.21 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 172.28.56.0 255.255.255.0 172.28.56.1 1 172.28.60.0 255.255.255.0 172.28.56.1 1 172.28.63.0 255.255.255.0 172.28.56.1 1 172.28.34.0 255.255.255.0 172.28.56.1 1 172.28.42.0 255.255.255.0 172.28.56.1 1 192.168.0.0 255.255.0.0 172.28.56.1 1 10.32.0.0 255.255.0.0 172.28.56.1 1 0.0.0.0 0.0.0.0 172.28.58.1 Default 172.28.58.0 255.255.255.0 172.28.58.1 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I am at a complete loss why the non-working servers have no On-link route for 172.28.56.0. Does anyone have any suggestions on what I should be looking at to figure this out? Also, I do have "physical" access to the console if needed through vSphere Client.

  Read the article

• External hard drive doesn't appear in Computer

  - by Thomas Clayson

  I cannot work out why this is happening. I have an external hard drive (which is an old laptop hard drive with an IDE to USB adapter). Plugging it into my computer powers it up. It spins correctly and the lights on the adapter flash normally. Uninstalling from hardware manager and plugging it back in causes Windows to "install new software", and it says it has installed properly. In Disk Management it comes up in the bottom part as Disk 2 with the right size (~60 GB), but not in the top half. There are three empty drives in the top half. They don't have titles or drive letters. Right clicking them bring up slightly varying context menus, but all with the options disabled. Here is a picture of my Disk Management screen: How do I make this drive show up in My Computer? I need to format it and use it as an external hard drive.

  Read the article

• Sharing Internet Connection using an ad-hoc wifi network

  - by Apps

  I've installed a WiFi Adapter in my Windows XP PC and created an ad-hoc network. I am able to connect to the network through my iPod Touch. On the same PC I have a LAN connection to the Internet. I need to share this internet connection to my iPod too. The problem is Windows did not assign an IP Address (even though assign IP address automatically is selected) to this WiFi network. When I tried to share the Internet connection, I got a message that LAN Network Adapter's IP address will be changed to 192.168.1.1. But if this happens I will not be able to connect to other devices/servers in my LAN Network. How do I share the Internet connection through WiFi?

  Read the article

• Hyper-V virtual machine unable to get IP address from DHCP server running on same physical box

  - by Bronumski

  We have a Windows server 2008 R2 with two network cards running AD, DHCP, DNS and Hyper-V The first nic is setup with a static IP address and DHCP, WDS, and DNS are bound to it. The second nic is configured in Hyper-V to be only used by Hyper-V and has been automatically configured so that only the virtual switch is enabled on the adapter. DHCP and DNS work fine for all physical machines on the network. It also works for Virtual Machines running on another physical box. Virtual machines that are bound to the virtual switch network adapter are unable to get a IP address. If the virtual machine is given a static IP address with correct subnet, gateway and dns everything works. Has anyone else got this working?

  Read the article

• Mini DisplayPort -> DVI -> VGA ?

  - by ibz

  I have a Mini DisplayPort to DVI adapter which I use to connect my MacBook to a screen that has DVI input. I also have a screen with VGA only input which I want to be able to use, so instead of buying yet another expensive Apple adapter (the Mini DisplayPort to VGA), I just got a cheap DVI to VGA, so I can do Mini DisplayPort - DVI - VGA. It doesn't seem to work though. The screen just says "no connection". Does anyone know if this is actually supposed to work (and my DVI - VGA is just broken), or is this simply not supported and I need to get the expensive Apple Mini DisplayPort to VGA? Thanks!

  Read the article

• Change the order of DNS lookup when connected in the VPN

  - by qwerty2010

  Hi, Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

  Read the article

• Can a Mini DisplayPort to HDMI cable support resolutions above 1920x1200?

  - by cnst

  Is it theoretically possible for a cheapo Mini DisplayPort to HDMI cable or adapter to support resolutions above 1920 × 1200, e.g. 2560 × 1440 (QHD)? Or is it always electrically-equivalent to a single-link DVI, and such resolutions above 1920×1200 are out of the question? From empirical evidence, I've tried out some rather expensive brand-name adapter from a local Apple dealer that was marked as HDMI 1.3 compliant with my mid-2013 MacBook Air (5000) and also with X230 (4000), and a QHD monitor, but was only getting a maximum of FHD resulution through such an arrangement.

  Read the article

• How to share internet connection on Mac os x to Virtualbox vm's using Host-only

  - by redben

  In one line : is the following possible : Airport <- osx bridge - vbox-Host-only - vm's On a mac os x, i have virtual box with a virtual machine. For now i have configured 2 interfaces for my virtual machine eth0 is normal bridge for my vm to acces the internet (when airport is connected) eth1 is set to host-only so i can access my vm from the host when there is no wifi/aiport is down. So basically it's like Adapter 1 when there is Wifi, Adapter 2 when there is not. I'd like to have only one configuration to make it simpler. I thought i could just keep the Host only configuration, and on the host (os x) go to internet sharing and select "share from airport" to vboxnet0 (the vb virtual interface). Only to find out that vboxnet0 dosn't show up in the interfaces list on os x preferences. I know that on a linux host you could install something called bridge-utils and use that to bridge the two insterfaces. Is there any thing like that for Mac ?

  Read the article

• Trouble joining Windows Server 2008 to Domain

  - by Jim R

  When I try to join my new server to my existing domain I get the following error: "An attempt to resolve the DNS name of a DC in the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resove DNS names in the target domain." I have tried all of the following already: Successfully pinged the domain controller. Ping the new server from the domain controller by IP address and by DNS name. Ping the DC server from the new server by IP address and by DNS name. Changed the network to DHCP (it was originally static). No joy as static or DHCP. Turned off all firewall settings. Added the domain name to 'hosts' file. Added the server name of the primary domain controller to the 'hosts' file in the new server. Any ideas? Thanks in advance for any help! Jim Update: With help from J. Brian Kelly (Thanks) I have managed to narrow down the problem to a DNS issue. Specifically, UDP/53 packets are being sent (they are seen in Network Monitor), but are not getting to the DNS server. But, I do not yet know why. Update: The quested output from IPCONFIG for the HyperV host and the virtual machine. IPCONFIG from HyperV Server Windows IP Configuration Host Name . . . . . . . . . . . . : HYPER Primary Dns Suffix . . . . . . . : sfi-wfc.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi-wfc.com Ethernet adapter Local Area Connection 4: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Primary Network Physical Address. . . . . . . . . : 00-30-48-CA-CC-7A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd16:3ac2:3d4f:e275%679(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.100.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.100.10 DHCPv6 IAID . . . . . . . . . . . : -1476382648 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-10-20-E9-00-30-48-CA-CC-7A DNS Servers . . . . . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Intel(R) 82576 Gigabit Dual Port Network Connection #2 Physical Address. . . . . . . . . : 00-30-48-CA-CC-7B DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPCONFIG from Virtual Machine Windows IP Configuration Host Name . . . . . . . . . . . . : DB Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-66-03-02 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.100.128(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Saturday, August 29, 2009 10:44:45 AM Lease Expires . . . . . . . . . . : Tuesday, September 01, 2009 3:08:33 PM Default Gateway . . . . . . . . . : 192.168.100.10 DHCP Server . . . . . . . . . . . : 192.168.100.5 DNS Servers . . . . . . . . . . . : 192.168.102.5 Primary WINS Server . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 8: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : isatap.sfi Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 02-00-54-55-4E-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes

  Read the article

• Why maximum 1.0 Gbit Ethernet connection an old notebook, and only 100 Mbit on newer faster computer

  - by Sam

  Strange problem about Ethernet speed: recently we bought an i7 core computer running Win7 64 bit with an onboard Gigabit Ethernet controller (Realtek PCIe Gbit Ethernet Family controller). Connecting this new fast pc directly to our brand new ASUS Gigabit Ethernet router via CAT6 cable(!) shows up the adapter status (see picture attached) only 100mbit, while the router is capable of 1000 mbit. More facts: Connecting an 8 year old IBM notebook with gigabit ethernet to the same cable end shows 1.0 Gbit connection in its adapter status. Speedtest.net shows 35 mbit/s down on the new computer Speedtest.net shows 78 mbit/s down on the old rusty IBM notebook. We have an 120 mbit down internet connection, which we we truly receive on another pc (also directly connected to the router) How to get the 1.0 Gbit going in the new pc ?

  Read the article

• PS/2 vs USB keyboards: performance and energy consumption

  - by Mister Smith

  As far as I know, PS/2 keyboards are interrupt driven, while USB are polled. Typically a PS/2 keyboard was assigned IRQ_1 on Windows. I'm no hardware expert, but at a first glance seems like the PS/2 keyboards are more efficient. So here are my questions: On modern day computers, are PS/2 keyboard better (or faster), and if so, would it be noticeable at all? (e.g.: in gaming) Since they don't need polling, do PS/2 keyboards save energy compared to USB? (notice I'm not talking only about the peripheral here, but about the overall computer energy consumption). In case PS/2 had any advantage over USB, would adding a PS/2 adapter to my USB keyboard make the device as good as an actual PS/2 keyboard? Conversely, would adding a USB adapter to a PS/2 make it as bad as a USB KB? Thanks in advance.

  Read the article

• Logitech USB headphones detected and selected in Debian Squeeze but sound still coming from speakers

  - by mattalexx

  I have a pair of Logitech wireless USB headphones that work with Ubuntu Natty but aren't working in Debian Squeeze. When they are selected as the default audio output, the sound comes out of the speakers instead of the headphones. I have rebooted and tried using a different USB port. My computer is a Thinkpad T510. How can I fix this problem? Here is lsusb: Bus 002 Device 005: ID 046d:0a29 Logitech, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Here is cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf2420000 irq 17 1 [Headset ]: USB-Audio - Logitech Wireless Headset Logitech Logitech Wireless Headset at usb-0000:00:1d.0-1.1, full speed 2 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xcdefc000 irq 17 Here is the gnome-volume-control GUI: Here's lsmod | grep usb: snd_usb_audio 50670 0 snd_usb_lib 11192 1 snd_usb_audio usbhid 28008 0 hid 50909 1 usbhid snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec snd_pcm 47226 3 snd_usb_audio,snd_hda_intel,snd_hda_codec usbcore 98969 5 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd snd 34423 11 snd_usb_audio,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device nls_base 4541 1 usbcore Here's cat /etc/modprobe.d/alsa-base.conf: # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; } install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; } install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 # Keep snd-pcsp from beeing loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 EDIT In VLC, I reset VLC prefs (Output: Default) and sound still comes out of speakers as expected. Then I change it to "Output: ALSA Audio output" and a Device menu appears. I select the headphones. When I then save the prefs, the audio switch to the headphones! But here's what's weird: I go back to prefs, change it to "Output: Default" and the headphones keep working. Maybe the ALSA option is actually what is being chosen as the "Default" option, but the Device menu (whose selection is still being used) is still set to the headphones. Anyway, now I need to figure out how to make it work as the default for the whole system.

  Read the article

• Windows 8 Pro Hyper-V guest with no internet

  - by Perplexed

  Trying to get this working on my Windows 8 Pro machine. I created an External Switch Assigned the newly available adapter to a Guest machine with Win 2008 os. My host has internet connection. Host can ping Guest, Guest cannot ping Host. Guest has no internet connection. Pasting the ip of both host and guest. Your help appreciated. HOST ========================== Ethernet adapter vEthernet (EXTSW01): Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2 Physical Address. . . . . . . . . : 9C-B7-0F-0F-D7-D0 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::5434:a9fd:8611:d207%54(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.15(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Saturday, September 8, 2012 12:34:44 PM Lease Expires . . . . . . . . . . : Saturday, September 15, 2012 12:34:44 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DHCPv6 IAID . . . . . . . . . . . : 916240141 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-DC-C9-2C-9C-B7-0D-0D-D7-D0 DNS Servers . . . . . . . . . . . : 64.71.255.999 NetBIOS over Tcpip. . . . . . . . : Enabled GUEST ========================== Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-3F-0F-00 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::953f:ec5c:5d84:1b50%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 0.0.0.0 DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-DD-2F-29-0F-15-5E-00-0F-00 DNS Servers . . . . . . . . . . . : ::1 127.0.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• OS X will not register newly installed network adapters

  - by Chris

  I have purchased an Edimax 7318USg and tested it on a Windows machine (works). The installation process for the software for this adapter runs smoothly. However, OS X simply does not recognize new network adapters. When you go to System Preferences/Network, a new network adapter should be present/there should be an alert. This is not the case. Why might this be? Is there a setting I may reset to force the operating system to recognize this? Thanks!

  Read the article

• SAP PI 7.1 Runtime Workbench error: Domain ??? (domain.null)

  - by Techboy

  Within the Runtime Workbench screen of my SAP PI 7.1 system I have the error: Domain ??? (domain.null) Integration Server Integration Engines Non-Central Adapter Engines J2SE Adapter Tools The SLD CIM instance, class XI Domain shows: CreationClassName: SAP_XIDomain Name: domain.null Caption: Domain null With the associations: XI Contained Integration Repository XI Contained Integration Server XI Contained Integration Server If I do this: Move these associations to the correct SAP_XIDomain Delete the SAP_XIDomain 'Domain null' Restart the SLD Restart the SAP PI system it all appears okay (i.e. the 'Domain null') issue does not appear. The 'Domain null' issue re-appears as soon as I go into the SAP Runtime Workbench. Please can you tell me why it says domain.null and how to resolve it?

  Read the article

• Does a Samsung G3 Station external hard drive stop working when power supply is too high?

  - by Cacovsky

  I have a Samsung G3 Station 2TB external hard drive (link to PDF specs here). It was working perfectly when I accidentally plugged it in my notebook's power source. The notebook's power source is 19V/3.42A. The hard drive's is 12V/2A and I know that, inside its case, there is regular 2TB SATA drive, along with some sort of adapter. Does this adapter has some kind of power protection? I opened the case and the hard drive board smells bad. Does my data is forever lost or can I replace its board?

  Read the article

• Setting DNS suffix for multiple network adapters in a VM

  - by arun_bh

  Is there a way to set the DNS Suffix for multiple network adapters in a VM using the sysprep file? We are trying to setup Windows 2003 VMs with 2 network adapters. In the one adapter case the sysprep we are able to set the suffix using DNSDomain. But this doesnt work in the 2 adapter case. The The VM is setup corrently though without any issues but one of our apps relies on the DNS Suffix value to work correctly. Thanks in advance.

  Read the article

• LUNS access issue in ESX4 Cluster server

  - by rmustafa

  HI, I've created volumes in equallogic in PS 6000 XV(having 2 member which is in 1 pool), checked & those volumes can be easily detected my ISCSI software in windows. But the problem with ESX , not able to see the assigned disk on ESX server, I can explain what I've done: 1.Created Cluster with enabled HA & DRS 2.Added 3 ESX4 HOST 3.Added VMkernel & configured in all 3 ESX4, enabled vmotion & FT on the same adapter. 4.went to iSCSI storage adapter properties, enabled iSCSI 5.Trying to discover the available storage with the controller IP on dynamic discovery, but not able to see the assigned storage Note: the same volume is accessed to windows that means there is no issue from storage , am I right ???? Note: I wanted to mount the same volume in all 3 ESX host. Please suggest .... Thanks & Regards, Rashid Mustafa

  Read the article

• MacBook says to replace battery. Should I?

  - by Palantir

  Hi! My MacBook says that battery is not charging, and the battery is completely empty (in fact, pressing the button on the battery illuminates no LEDs). If I plug the power adapter off the mac shuts off immediately. I tried with a spare adapter, and it won't charge it. System information says it has 380 cycles. The battery is 2.5 years old. System profiler says the battery has 0 mAh of capacity, and that it should be replaced. Should I just buy a new battery, or should I bring it to an apple point, and leave it there? They can take a look at it (it's on AppleCare), they told me that they will repair it is there is anything wrong with the charging circuit, but they won't give me a new battery. They will keep the laptop for 10 working days at least... I hate when this happens :P

  Read the article

• Why doesn't my Droid phone charge when connected to a powered USB hub that is not connected to my computer?

  - by pkaeding

  I notice that my new Motorola Droid phone charges perfectly fine when I connect it to my computer via the USB cable, or if I connect it to a car cigarette lighter-USB adapter, or a wall power-USB adapter. It also works fine when I connect it to a powered USB hub that is connected to my computer. However, if that same powered USB hub is not connected to my computer when I connect the phone, it does not charge. If I connect the computer to the hub, and then connect the phone to the hub, it will charge. If I then disconnect the computer from the hub, the phone will continue to charge. Does anyone know why this is happening, or what I can do to be able to charge my phone from a powered hub, without my computer being present?

  Read the article

• Connect a ssd externally such that hdparm is fully supported

  - by student

  I am just trying some hdparm magic with my new ssd (samsung 840 pro). However I don't want to change my drive over and over so it would be great if I could connect it externally to my laptop. I have a cheap sata-usb Adapter, but I feel it doesn't support the ATA commands send by hdparm. So what's the best way to do this? Are there sata-usb Adapters which fully support the hdparm things? Would it be a good idea to buy a sata-esata adapter to get full control over the drive?

  Read the article

• Restart my graphics card without rebooting?

  - by defaye

  Wondered if it is possible to use DevCon to restart a display device as a stop-gap solution to artifacts left over from a graphics card malfunction? In particular it leaves my cursor very un-user-friendly: I found out the hardware ID of my display adapter through device manager (below) [(windows key + pause break) - device manager - display adapters - right click your display adapter - properties - details - hardware ids.] I tried the commands (opened with admin privileges) devcon restart "PCI\VEN_1002" and devcon restart =display but it always come back with No devices restarted.. Is it even possible to restart the graphics card without a system reboot?

  Read the article

• No sound through DisplayPort

  - by Chris Koknat

  I'm trying to connect my Elitebook 8440p laptop to my Samsung HDTV. The laptop does not have a HDMI connection, but it does have DisplayPort. I bought a DisplayPort-to-HDMI adapter here http://www.amazon.com/gp/product/B002CSRFD8/ref=oss_product, and connected it with a 3' HDMI cable. The video shows up fine, but there is no audio. DisplayPort, HDMI, and the adapter all support audio. I contacted HP tech support, who told me to update my sound drivers. I installed the driver and rebooted. Supposedly, I should see a "HD Audio" tab. No luck, even after installing the driver again and rebooting. HP closed the case. I'm using XP Pro.

  Read the article

• Suspected network performance issue on VirtualBox Ubuntu guest on Win7 host

  - by Adam

  I set up Ubuntu 12.04 in VirtualBox on the Win7 machine I was allocated on my new project. I am running Java, Eclipse, Tomcat to develop a large data-intensive application and I noticed that this application runs at half the speed of my colleague's identical machine, where he runs it all under Windows. I think I have narrowed down the performance issue to the network, after comparing and equalising all the Java VM settings with my colleague. Is there a ping test I can do or some other network diagnostic test to flag up any problems? To give some background, the network performance is confusing. Running a network speed test to my colleague's machine with iperf shows speeds of 6 Mb/s from my Ubuntu guest, and 90 Mb/s from the win7 host. Large downloads, e.g. the Java SDK, come down at about 1.2 MB/s on both the guest and the host. Pings are sub-1ms on the host, but 1.5ms on the guest. I also did a broadband speed test, and got 10Mb/s download speed on both, but the host has an upload speed of 10Mb/s but the guest only uploads at 3Mb/s. I've been trying to diagnose any MTU problems with ping -M do to identify any kind of packet fragmentation problem but it's progressing very slow because I don't have much experience in this area. From what I read on other people's networking issues with VB and Linux guests on Win7 hosts, I should be able to get the speed on the guest up to the same level as the host. I installed a fresh VM with Ubuntu again to see if I'd foobar'd it somehow, but I'm getting the same readings with iperf on the virgin installation. My setup is: Adapter 1: Intel PRO/1000 MT Desktop (NAT) Adapter 2: ditto (host-only adapter) eth0 Link encap:Ethernet HWaddr 08:00:27:0b:76:bf inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe0b:76bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:86236 errors:0 dropped:0 overruns:0 frame:0 TX packets:49369 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:69163946 (69.1 MB) TX bytes:3530535 (3.5 MB) eth2 Link encap:Ethernet HWaddr 08:00:27:a3:26:b8 inet addr:192.168.56.101 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fea3:26b8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:59 errors:0 dropped:0 overruns:0 frame:0 TX packets:57 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9148 (9.1 KB) TX bytes:7648 (7.6 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:701 errors:0 dropped:0 overruns:0 frame:0 TX packets:701 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:66321 (66.3 KB) TX bytes:66321 (66.3 KB)

  Read the article

• help building a PC that can image a dozen hard drives simultaneously

  - by Bigbio2002

  Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

  Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >