Search Results

Search found 4913 results on 197 pages for 'ps rs4'.

Page 142/197 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Hyper-v on 2012R2 startup gen1 vm causes the host to freeze up

  - by sputnik

  I've searched a lot to resolve the following issue, but nothing helped me. My problem is, that starting up a first-gen vm locks up the whole host. Only a hard reset helps. Second-gen vm starts and runs perfectly. The freezes happened on 3 different vms. FreeBSD, Ubuntu, Windows Server 2008R2, while Windows 8.1 on second gen config works perfectly. Im using this pc mainly as a workstation. No eventlog errors nor dumps are generated. My system: Windows Server 2012R2 FX-8350, non OC ASRock 870 Extreme R2 (Crappy board imho) 32GB DDR3 1866@1600 (My motherboard, against the "support" for 1866ram won't work with full speed) 120GB SSD 4.5TB Storage space device I dont think that its due to my system, because vmware workstation was running without problems. Did I forget to configure something? Any help is appreciated. P.S: Even deactivating C1E, C6, C&Q didnt work. P.P.S: With no virtual network adapter set, the system still locks up. Creating a first gen vm without any hdds and network and launching works. Attaching a boot dvd causes the host to freeze. The host freezes as the gen1 vm begins to boot, doesn't matter if from dvd or hdd

  Read the article

• Clarification on signals (sighup), jobs, and the controlling terminal

  - by asolberg

  So I've read two different perspectives and I'm trying to figure out which one is right. 1) Some sources online say that signals sent from the controlling terminal are ONLY sent to the foreground process group. That means if want a process to continue running in the background when you logout it is sufficient to simply suspend the job (ctrl-Z) and resume it in the background (bg). Then you can log out and it will continue to run because SIGHUP is only sent to the foreground job. See: http://blog.nelhage.com/2010/01/a-brief-introduction-to-termios-signaling-and-job-control/ ...In addition, if any signal-generating character is read by a terminal, it generates the appropriate signal to the foreground process group.... 2) Other sources claim you need to use the "nohup" command at the time the program is executed, or failing that, issue a "disown" command during execution to remove it from the jobs table that listens for SIGHUP. They say if you don't do this when you logout your process will also exit even if its running in a background process group. For example: http://docstore.mik.ua/orelly/unix3/upt/ch23_11.htm ...If I log out anyway, the shell sends my background job a HUP signal... In my own experiments with Ubuntu linux it seems like 1) is correct. I executed a command: "sleep 20 &" then logged out, logged back in and pressed did a "ps aux". Sure enough the sleep command was still running. So then why is it that so many people seem to believe number 2? And if all you have to do is place a job in the background to keep it running why do so many people use "nohup" and "disown?"

  Read the article

• Apache crashes a few seconds after the start.

  - by Nacho

  Hi, i've got a problem with apache. When i try to start it (/etc/init.d/apache2 start) it dies after a few seconds. It shows up on "ps aux" consuming a lot of memory and then dies. I don't know what could be causing apache to consume this amount of memory: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 13379 1.0 0.3 14376 3908 ? Ss 22:31 0:00 /usr/sbin/apache2 -k start www-data 13383 0.0 0.4 197316 4196 ? Sl 22:31 0:00 /usr/sbin/apache2 -k start www-data 13390 0.0 0.3 172728 4172 ? Sl 22:31 0:00 /usr/sbin/apache2 -k start www-data 13396 0.0 0.3 156336 4160 ? Sl 22:31 0:00 /usr/sbin/apache2 -k start www-data 13400 0.0 0.3 148140 4156 ? Sl 22:31 0:00 /usr/sbin/apache2 -k start www-data 13403 0.0 0.3 131748 4148 ? Sl 22:31 0:00 /usr/sbin/apache2 -k start Here is a htop screenshot: http://i.imgur.com/N4Chh.png It happened suddenly, no change had been made to server config, so i don't know whats causing it. The error log of my virtual servers shows this: [Sun Jan 30 22:19:50 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=9685): Couldn't create worker thread 11 in daemon process 'fb.ebookmetafinder.com'. [Sun Jan 30 22:19:55 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=9685): Couldn't create worker thread 19 in daemon process 'fb.ebookmetafinder.com'. [Sun Jan 30 22:29:40 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=12009): Couldn't create worker thread 18 in daemon process 'fb.ebookmetafinder.com'. [Sun Jan 30 22:31:06 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=13396): Couldn't create worker thread 15 in daemon process 'fb.ebookmetafinder.com'. [Sun Jan 30 22:35:02 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=14009): Couldn't create worker thread 16 in daemon process 'fb.ebookmetafinder.com'. [Sun Jan 30 22:35:07 2011] [alert] (11)Resource temporarily unavailable: mod_wsgi (pid=14009): Couldn't create worker thread 17 in daemon process 'fb.ebookmetafinder.com'. I'm on a ubuntu server vps and i use mod_wsgi with django. Thanks.

  Read the article

• Extremely high mysqld CPU usage with no active queries

  - by RadarNyan

  I have a VPS running Ubuntu 12.04 LTS with LEMP stack, followed the guide from Linode Library (since I'm using a Linode) to setup, and everything worked fine until now. I don't know what's wrong, but my CPU usage just goes up since a week ago. Today things getting really bad - I got 74% CPU usage so I went check and found that mysqld taking too much CPU usage (somewhere around 30% ~ 80%) So I did some Google Search, tried disable InnoDB, restart mysql, reset ntp / system clock (Isn't this bug supposed to happen more than a year ago?!) and reboot my VPS, nothing helped. Even with mysql processlist empty, I still get mysqld CPU usage very high. I don't know what I missed and have totally no idea, any advice would be appreciated. Thanks in advance. Update: I got these from running "strace mysqld" write(2, "InnoDB: Unable to lock ./ibdata1"..., 44) = 44 write(2, "InnoDB: Check that you do not al"..., 115) = 115 select(0, NULL, NULL, NULL, {1, 0}^[[A^[[A) = 0 (Timeout) fcntl64(3, F_SETLK64, {type=F_WRLCK, whence=SEEK_SET, start=0, len=0}, 0xbfa496f8) = -1 EAGAIN (Resource temporarily unavailable) hum... I did tried to disable InnoDB and it didn't fix this problem. Any idea? Update2: # ps -e | grep mysqld 13099 ? 00:00:20 mysqld then use "strace -p 13099", the following lines appears repeatedly: fcntl64(12, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(12, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(12, {sa_family=AF_FILE, NULL}, [2]) = 14 fcntl64(12, F_SETFL, O_RDWR) = 0 getsockname(14, {sa_family=AF_FILE, path="/var/run/mysqld/mysqld.sock"}, [30]) = 0 fcntl64(14, F_SETFL, O_RDONLY) = 0 fcntl64(14, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(14, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0", 8) = 0 setsockopt(14, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0", 8) = 0 fcntl64(14, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(14, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) futex(0xb786a584, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0xb786a580, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0xb7869998, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1) = 1 ([{fd=12, revents=POLLIN}]) er... now I totally don't get it x_x help

  Read the article

• FreeBSD rc.d script doesn't work when starting up

  - by kastermester

  I am trying to write a rc.d script to startup the fastcgi-mono-server4 on FreeBSD when the computer starts up - in order to run it with nginx. The script works when I execute it while being logged in on the server - but when booting I get the following message: eval: -applications=192.168.50.133:/:/usr/local/www/nginx: not found The script looks as follows: #!/bin/sh # PROVIDE: monofcgid # REQUIRE: LOGIN nginx # KEYWORD: shutdown . /etc/rc.subr name="monofcgid" rcvar="monofcgid_enable" stop_cmd="${name}_stop" start_cmd="${name}_start" start_precmd="${name}_prestart" start_postcmd="${name}_poststart" stop_postcmd="${name}_poststop" command=$(which fastcgi-mono-server4) apps="192.168.50.133:/:/usr/local/www/nginx" pidfile="/var/run/${name}.pid" monofcgid_prestart() { if [ -f $pidfile ]; then echo "monofcgid is already running." exit 0 fi } monofcgid_start() { echo "Starting monofcgid." ${command} -applications=${apps} -socket=tcp:127.0.0.1:9000 & } monofcgid_poststart() { MONOSERVER_PID=$(ps ax | grep mono/4.0/fastcgi-m | grep -v grep | awk '{print $1}') if [ -f $pidfile ]; then rm $pidfile fi if [ -n $MONOSERVER_PID ]; then echo $MONOSERVER_PID > $pidfile fi } monofcgid_stop() { if [ -f $pidfile ]; then echo "Stopping monofcgid." kill $(cat $pidfile) echo "Stopped monofcgid." else echo "monofcgid is not running." exit 0 fi } monofcgid_poststop() { rm $pidfile } load_rc_config $name run_rc_command "$1" In case it is not already super clear, I am fairly new to both FreeBSD and sh scripts, so I'm kind of prepared for some obvious little detail I overlooked. I would very much like to know exactly why this is failing and how to solve it, but also if anyone has a better way of accomplishing this, then I am all open to ideas.

  Read the article

• Autologin 2 Windows users OR Login another user from the desktop

  - by fpdragon

  I'm using two windows users on my HTPC at the same time. One is just for watching videos and one for administration via remote. This setup is quite ideal for me since windows can handle multiple concurrent logins and the win "rdp concurrent hack" (Google). The problem is, I want both users to be logged in automatically when the pc was started. It shall be possible to watch tv and also the admin user shall be automatically logged in to start my scripts and other tasks, even if I haven't logged in via remote desktop manually. Later, when I want to admin my htpc I can just rdp connect the admin user without interrupting the video playback on the actual HTPC's screen and check my cleanup tasks, downloads, ... witch already executed for this admin user. But right now I found no solution to automatically login user A from a user B desktop and I also found no solution to autologin both users immediately at startup. As a workaround I have to fire up my other notebook machine and login one time with the remote user via rdp. From this time on the remote admin user is running concurrent with the main user in the background of the machine. The other workaround would be... after startup switch user from main user to admin user and then back again. But that also requires manual steps. I'm on a Windows 8 System right now but all infos for Win7 or XP would be also interesting. thanks a lot for all ideas. PS: just to prevent useless posts... don't tell me that only one user can be logged in to windows. ;)

  Read the article

• A-2-Z web hosting on Amazon AWS

  - by JDelage

  All, I am studying web dvp, and one of my classes is project-based. We have to build a functional site that demonstrate our understanding of: HTML, CSS, Javascript, php, MySQL, And potentially Ajax or some other web component. For the project, we can use a local server using WampServer and basically build the site entirely on our laptop. If I have time, I would like to create a real site, and I thought it would be a good way to familiarize myself with Amazon's AWS services. So if I purchase a domain name, can I rely on AWS to host the site from A-to-Z? I understand I can use AWS to host content, the database, and do the background computations, if needed. What else do I need and what are the parts that AWS cannot help me with? Second, is there good documentation for a beginner to navigate AWS and learn how to use it (either on Amazon, or some 3rd party sites, or even a good book, as long as is up to date). The ideal documentation would be a tutorial on creating a web site from a-to-z on AWS, as detailed as possible. As you can guess, I have limited understanding of the IT issues. I have 0 Linux or sysadmin experience, but this is a good opportunity to change that. I hope you can help me. Thank you, JDelage PS: Please keep the answers AWS-specific. At this point, I am only interested in alternative services to the extent that they plug a hole in Amazon's offering.

  Read the article

• Jobs with anacron won't run

  - by mareser

  I would like to run two bash scripts daily using anacron in order to backup some data. Unfortunately I can't figure out why said scripts are not executed. For test purposes I let cron execute the scripts and it worked fine. cat /etc/anacrontab gives # /etc/anacrontab: configuration file for anacron # See anacron(8) and anacrontab(5) for details. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # These replace cron's entries 1 5 cron.daily nice run-parts --report /etc/cron.daily 7 10 cron.weekly nice run-parts --report /etc/cron.weekly @monthly 15 cron.monthly nice run-parts --report /etc/cron.monthly 1 5 TB_bak /bin/sh /home/vasco2/Dropbox/Scripts/backup_TB.sh 1 5 key_db_bak /bin/sh /home/vasco2/Dropbox/Scripts/bak_key_db.sh The output of ls ~/Dropbox/Scripts/ is backup_TB.sh bak_key_db.sh I use Linux Mint Katya. uname -a gives Linux vasco2 2.6.38-8-generic-pae #42-Ubuntu SMP Mon Apr 11 05:17:09 UTC 2011 i686 i686 i386 GNU/Linux I would be very happy if somebody could point me in the right direction on why those scripts won't get executed. P.S.: There is no anacron tag on superuser.com. Maybe somebody wants to change that.

  Read the article

• Windows Firewall Software to Filter Transit Traffic

  - by soonts

  I need to test my networking code for Nintendo Wii under the conditions when some specific Internet server is not available. Wii is connected to my PC with crossover ethernet cable. PC has 2 NICs. PC is connected to hardware router with ethernet cable. The hardware router serves as NAT and has an internet connected to its uplink. I set the Wii to be in the same lan as PC by using Windows XP Network bridge. I can observe the WII network traffic using e.g. Wireshark sniffer. Is there a software firewall that can selectively filter out transit traffic? (e.g. block outgoing TCP connections to 123.45.67.89 to port 443) I tried Outpost Pro 2009 and Comodo. Outpost firewall blocks all transit traffic with it's implicit "block transit packet" rule. If the transit traffic is explicitly allowed by creating the system-wide low level rule, then it's allowed completely and no other filter can selectively block it. Comodo firewall only process rules when the packet has localhost's IP as either source or destination, allowing the rest of the traffic. Any ideas? Thanks in advance! P.S. Platform is Windows XP 32 bit, no other OSes is allowed, Windows ICS (Internet Connection Sharing) doesnt work since the Wii is unable to connect, becides I don't like the idea of adding one more level of NAT.

  Read the article

• Help setting up an secondary authoritative DNS server.

  - by GLB03

  We have three Authoritative DNS servers and three recursive/caching DNS servers on my campus. Authoritative servers DNS1- Windows 2003 DNS2- Old Red Hat ----- Replacing w/ newer version DNS3- Windows 2008 (I installed) Caching and Recursive resolvers servers Server1- Windows 2003 Server2- CentOS 5.2 (I installed) Server3- CentOS 5.3 (I installed) I am replacing DNS2 with a newer Red Hat version, but have no documentation on how it was implemented. I have setup caching and windows authoritative servers, but not a linux secondary authoritative server. I have a perl script from the original server that pulls data from our DNS1 server. We use DJBDNS and TinyDNS on our linux servers. Our Network Engineer says the DNS2 server I am replacing is an authoritative server that doesn't need to be caching, but the only instructions I see is for an Authoritative server that does caching as well. Can someone point me in the right directions. I thought I was on the right track with using these instructions but when I query my new dns server I get "No response from server", I have temporarily disabled iptables to eliminate it from being an issue. ps -aux | grep dns avahi 3493 0.0 0.2 2600 1272 ? Ss Apr24 0:05 avahi-daemon: running [newdns2.local] root 5254 0.0 0.1 3920 680 pts/0 R+ 09:56 0:00 grep dns root 6451 0.0 0.0 1528 308 ? S Apr29 0:00 supervise tinydns dnslog 6454 0.0 0.0 1540 308 ? S Apr29 0:00 multilog t ./main tinydns 9269 0.0 0.0 1652 308 ? S Apr29 0:00 /usr/local/bin/tinydns

  Read the article

• Why java -version returning a different version than the one defined in JAVA_HOME?

  - by Shekhar

  I am trying to set JAVA_HOME in Ubuntu OS. I have copied jdk 1.7 in /usr/lib/jvm and set JAVA_HOME in /etc/profile file. Contents of /usr/lib/jvm folder are as follows : shekhar@ubuntu:~$ ls /usr/lib/jvm/ default-java java-1.6.0-openjdk java-6-openjdk java-6-openjdk-i386 jdk1.7.0_01 java-1.5.0-gcj-4.6 java-1.6.0-openjdk-i386 java-6-openjdk-common java-7-openjdk-i386 and last few lines of /etc/profile file are as follows : export JAVA_HOME=/usr/lib/jvm/jdk1.7.0_01 export PATH=$PATH:$JAVA_HOME/bin After finishing all this when I run java -version command I get following output : shekhar@ubuntu:~$ java -version java version "1.6.0_24" OpenJDK Runtime Environment (IcedTea6 1.11.4) (6b24-1.11.4-1ubuntu0.12.04.1) OpenJDK Server VM (build 20.0-b12, mixed mode) and when I run ls -lah command I get following output : shekhar@ubuntu:~$ ls -lah /usr/bin/java lrwxrwxrwx 1 root root 22 Sep 29 09:58 /usr/bin/java -> /etc/alternatives/java shekhar@ubuntu:~$ ls -lah /etc/alternatives/java lrwxrwxrwx 1 root root 45 Sep 29 09:58 /etc/alternatives/java -> /usr/lib/jvm/java-6-openjdk-i386/jre/bin/java Can anyone please tell me which thing I am missing? Why Ubuntu is still pointing to open jdk and not to my jdk 7? PS : I have seen this similar question and its answers but that question is related to Windows OS and not for Ubuntu so I am reposting this similar question for Ubuntu.

  Read the article

• IPtables: DNAT not working

  - by GetFree

  In a CentOS server I have, I want to forward port 8080 to a third-party webserver. So I added this rule: iptables -t nat -A PREROUTING -p tcp --dport 8080 -j DNAT --to-destination thirdparty_server_ip:80 But it doesn't seem to work. In an effort to debug the process, I added these two LOG rules: iptables -t mangle -A PREROUTING -p tcp --src my_laptop_ip --dport ! 22 -j LOG --log-level warning --log-prefix "[_REQUEST_COMING_FROM_CLIENT_] " iptables -t nat -A POSTROUTING -p tcp --dst thirdparty_server_ip -j LOG --log-level warning --log-prefix "[_REQUEST_BEING_FORWARDED_] " (the --dport ! 22 part is there just to filter out the SSH traffic so that my log file doesn't get flooded) According to this page the mangle/PREROUTING chain is the first one to process incomming packets and the nat/POSTROUTING chain is the last one to process outgoing packets. And since the nat/PREROUTING chain comes in the middle of the other two, the three rules should do this: the rule in mangle/PREROUTING logs the incomming packets the rule in nat/PREROUTING modifies the packets (it changes the dest IP and port) the rule in nat/POSTROUTING logs the modified packets about to be forwarded Although the first rule does log incomming packets comming from my laptop, the third rule doesn't log the packets which are supposed to be modified by the second rule. It does log, however, packets that are produced in the server, hence I know the two LOG rules are working properly. Why are the packets not being forwarded, or at least why are they not being logged by the third rule? PS: there are no more rules than those three. All other chains in all tables are empty and with policy ACCEPT.

  Read the article

• Problems compiling coreutils-8.5 on Solaris 5.10 on Intel platform

  - by PP

  I am having trouble compiling coreutils-8.5 on Solaris 5.10 on the Intel platform using cc. Firstly I had the following error during ./configure: checking whether <wchar.h> uses 'inline' correctly... no configure: error: <wchar.h> cannot be used with this compiler (/tool/sunstudio12.1/bin/cc -xc99=all -g -D_REENTRANT). This seemed similar to the problem in this question. The solution was to edit configure and replace the reference of -xc99=all to -xc99=all,no_lib. This permitted the configure to complete. Then I ran /usr/sfw/bin/gmake and it progressed until I received the following message: Making all in src gmake[2]: Entering directory `/home/peterp/src/coreutils-8.5/src' gmake all-am gmake[3]: Entering directory `/home/peterp/src/coreutils-8.5/src' CCLD chroot Undefined first referenced symbol in file eaccess ../lib/libcoreutils.a(euidaccess.o) ld: fatal: Symbol referencing errors. No output written to chroot What could cause this problem? PS I was only compiling coreutils because I wanted colour ls.

  Read the article

• esxi 5 monitoring

  - by user134880

  I'm new to esxi/vmware world. Have few question about monitoring esxi host. Now I'm using trial versian esxi 5.1 I can see performance charts in vShpere client. Cool. But I want to export this raw data (raw - I mean cvs,txt or some format which I can parse later) to other server to be able to parse this data later and create custom charts. (please do not advise to try vCenter, I need custom charts etc.) I could run esxtop in batch mode and use this data... But... How does vShpere client performance charts work? Where client takes data for charts? So if I will use esxtop batch mode it will add extra load to server. Is it possible to use same source as vSphere client use for charts? There is /var/lib/vmware/hostd/stats/hostAgentStats-20.stats file. Its looks like it is binary format. As I understood it is exactly data which I need?!?! Any ideas how to parse it? Thanks! PS: maybe some one know where to find, if there is one, info about processes running on esxi host?

  Read the article

• The SSL certificate doesn't established

  - by Andrey Eagle

  situation following: Windows Server 2008 R2 platform. Certificate installation in the IIS Manager occurs successfully with *.cer file but if I refresh the manager (F5), the certificate vanishes from the list. And, respectively in the Bindings window, at https addition, the certificate is absent in the menu. Thus if to open certificates via the MMS console, it can be seen in the Personal store. Whether there is any possibility to make so that the web server could "see" this certificate or how to make so that it didn't disappear from the list? Prompt how to solve this problem, thanks in advance! P.S. The certificate is acquired in tawte. In total that to me provided, these are account data where it is possible simply with save-pastit the certificate in 2 options: PKCS#7 and X.509. Here is the manual I used. P.S.2 If Complete Certificate Request with *.p7b I get an error: Cannot find the certificate request that is associated with this certificate file. Acertificate request must be comleted on the computer where the request was created.

  Read the article

• Need to have access to my office PC from my laptop hopping through two VPN servers

  - by Andriy Yurchuk

  Here's the illustration of what I have ( http://clip2net.com/s/2fvar ): My office PC with it's IP of 123.45.e.f. Office VPN, which I will connect to from my VPS to get to my office PC. My own VPS, which I use as a: client to connect to office VPN (through vpnc, which creates a tun0 with 123.45.c.d IP address); VPN server my laptop can connect to (OpenVPN, tun1, 10.8.0.1) My own laptop I will use as a VPN client to connect to VPS OpenVPN server (will create a tun0 with 10.8.0.2 IP address) Now what I have to do is to allow my laptop to connect to at least my office PC, but preferably to all the 123.45.x.x subnet. Please advice on how to best configure OpenVPN, routing, iptables or whatever else is needed on my VPS so that my laptop could gain access to my office PC. P.S. The reason I'm hopping through my VPS is that being connected to the office WiFi I cannot access my office PC and I cannot connect to office VPN (which is another way to access my office PC). The only way to access my PC from office WiFi I have is hopping though an outside network.

  Read the article

• smartctl short test doesn't seem to complete

  - by Cédric COPY

  I am working on project which involve automated HDD testing through smartctl. The station is working fine on most product, but I have two specific products that fail the smartctl test. Those two product are both WD product (WD2500BUDT series) Smartctl behaviour is quite strange, in fact the test is launched without any problem, i wait about 2min (test length), and when i check the smartctl, i have got no result at all. It's like I hadn't launched any test (no fail, no success in smartctl result). No error return on command, nothing in syslog, .. As i said before, the test is working for other product, thousands products worked well with this test. The main smartctl command used are : smarctl -t shortest /dev/sdX #Launch test smartctl -l selftest /dev/sdX #Look at test result I have tried to use: smartctl -s on /dev/sdX or smartctl -o on /dev/sdX But doesn't change anything. The system is using Debian 6.0, smartctl v5.40 (rev 3124) x86_64, HDD are plug through SATA to PCI controller. I have 4 HDD connected at a time. Well if anyone has some hints to give with this problem, because I have no idea how can i fix this. Thanks in advance. PS: Not sure if it was a serverfault topic, sorry if i was wrong!

  Read the article

• My home box as my own host?

  - by Majid

  Hi all, I have a 512 kb/s DSL service at home. I do not have a static IP but I can get one if I pay some extra to my ISP. Now, if I get the static IP, can I make my home box act as my internet host? What else do I need? Thanks P.S. I know that if at all possible, the site I make available this way might be slow, that is alright, my question is if it is possible at all. Edit: I need this for very small traffic. I am a php developer and for my projects I am often asked to provide a demo. I currently use a free hosting for this purpose but it is down most of the time and support is non-existent. So I thought to set-up my home computer as my test server. With this please note that: I will only occasionally have 'visitors' and that will be one or possibly two visitors at any time. These demos, are to showcase functionality, so no big images are served and page views will normally generate under 100KB of traffic.

  Read the article

• Some process/service/driver repeatedly presses F5

  - by VitalyB

  Hi everyone, I have the strangest problem that started 2 days ago (Windows7, 64bit). SOMETHING causes my F5 key to be constantly pressed. Rebooting helps, but only for a while, it keeps coming back to that. So far I've tried to disconnect and reconnect the keyboard (physically), however, disconnecting the keyboard doesn't actually do anything. Reconnecting it back again, causes the F5-pressing to stop, but not for very long (seconds/minutes). I'd really like to avoid a binary search for the programs (process closing/keyboard switching/etc) before I can, at the very least, identify the source of the keypress. Is there an application that can show me what is causing a key press? E.g is it the keyboard driver, or some process that executes SendKey repeatedly for reasons unknown. Thanks! P.S FYI, having F5 causes the strangest side effects. Task Manager refreshes very very quickly (as F5 is refresh), the desktop is constantly flickering and all the browsers stop working as they keep trying to refresh. I was lucky to find out what the heck is happening only because I started notepad and saw that current date/time started to appear constantly. If not that, I'd still be wondering.

  Read the article

• Fix Video timelines

  - by Josh

  So, I have been going through and riping all of my DVD's and it seems that the way to get the highest quality out of these is to have DVD Shrink de-encrypt, rip, and decompress, the DVD's. After that I usually end up with a high quality (high size) set of .vob files in a classic DVD structure. Then I use a python script that I wrote to automate the process of finding the title sequence and then combining all of the title sequences' .vob files together into one file(similar to the "copy /b" command in windows), and then changing the extension to .mpg (a more widely supported format then .vob). This allows me to get a high quality rip in about 40 min. The problem comes in playing the files. I need all of the ripped dvd's to play on my media computer using windows media center but windows media center (and vlc for that matter) all think that the video files are anywhere from 5 min. to 0 min. which is not a problem (the video will still play all the way through) but if you want to pause it, when it is unpaused the video will start all the way over (Also fast forward and rewind don't work). I suspect that it is something wrong with the way the timeline is encoded in the video file, various forums on the internet recommended using virtualdub to fix the errors. But when I try to open the file virtual dub says that the file is not in mpeg-1 encoding and may be in mpeg-2. Is there any way to fix this? PS: I am aware that there was a similar question but it hasn't had any activity for 2 months and is dealing more with wmv files.

  Read the article

• Create a wifi hotspot in a place where an authentication is required

  - by SoftTimur

  I live in a residence where Internet is provided via cable. Once the computer is connected to the cable, launching a browser will trigger an authentication, I have a username and password to enter, then the internet will be connected. With a gateway (e.g. Wireless Cable Voice Gateway Model CBVG834G) and 2 cables, two PCs can connect to the Internet with my account at the same time. Now the question is, I don't like the cable, and would like to create a wifi hotspot. It seems realizable with the same gateway. According to the instruction on page 2-4 of the manual: Enter http://192.168.0.1 in the address field of your Internet browser. Log in to the gateway with either of the default user names, MSO or admin... However, while connecting to the Internet successfully via cable and the gateway (e.g. google works), opening 192.168.0.1 oddly gives me an error on the browser: Does anyone know what happened? Is it due to the authentication required by my residence? Is there any other way to build a hotspot of wifi? PS: My system is MAC OS

  Read the article

• Keep permalinks in Wordpress

  - by Remus Rigo

  Is there any way to set my permalinks to keep their exact link. If I have a post like this one http://blog.rigo.ro/?p=11, then I would like that every time I edit the post to keep this link. I have installed the Revision Control plugin and I set it to do not keep revisions. Any ideea how to do this? I want to keep this format of links. Edit: I took a look again, the permalinks keep their links, but every time I edit it adds a new version to the database and the next post will have a higher number. If I edit my current post for 3 times (blog.rigo.ro/?p=11) the next post will be blog.rigo.ro/?p=14. Now, my question is how can I keep all my post and edits clean, one post/more edits = one entry in the database, so if I have. 10 post on my site and I edit them, I would like that my permalinks to be from 1 to 10. PS: I don't want to edit my database manually, is there any plugin to do this?

  Read the article

• Dovecot (on Mac OS X Server 3 - Mavericks) giving “Error: Failed to autocreate mailbox INBOX: Permission denied”

  - by user2965240

  I recently upgraded my server to Mavericks and I thought everything had gone perfectly. As it turns out, that was not exactly the case. After everything working fine for a week or so, I created a new user and my mail server flat out stopped working. Most frustratingly, there were no log errors (in any of the many mail logs) which shed any light on the cause. After much trial and error, I finally got my mail server functioning (partially) by reinstalling server and restoring the mail folder from the previous day's backup (yay for backups). However, as is often the case, there were MANY permission issues. After slogging through various permission problems, I believe that my system is now receiving mail, however none of my users can check it because every time someone attempts to login the server generates following error: Error: Failed to autocreate mailbox INBOX: Permission denied I would assume that this is yet another permissions problem, however after much searching, I still cannot resolve this. To be clear, I don't want Dovecot to autocreate any mailboxes at this point because all of the mailboxes should exist. Any help on this would be sooooooo greatly appreciated. P.S. On a side note: why is it that repairing permissions never takes care of difficult issues like these? That would be awfully helpful...

  Read the article

• What is the ideal way to set up multiple FTP enabled web accounts on Fedora?

  - by Nicholas Flynt

  I'm setting up a test server for use as a web development platform, and I'd like to mimic as closely as I can a typical shared hosting setup. That is, I'd like my server to have multple user FTP accounts, each of which links to a directory containing the webroot of the site, and I'd like apache to be able to easily see and manupulate these files. I'll admit: I'm not as familiar with Fedora as I'd like, I run Ubuntu on my home box and SElinux is giving me some grief. My initial plan was to have each user FTP into their home directory, and put the web directory there as well, but SElinux throws a hissy fit when apache tries to access anything outside of its web directory, so that plan was a no go. Would it be wise to continue this route, and perhaps mount web directories in user home folders so that FTP could still be used to access them, even though apache saw them in var/www like it expects? Would it make more sense to set up custom FTP accounts and use a single FTP user on the server box? What's the general course of action on something like this? I'm using vsftpd right now to host web directories, which is why I'm liking the home directory approach (it's simple and secure) but of course there's bound to be a better way to go about it. Thanks. (I'll leave other things, like restricted DB access and such, to another post. I'm interested right now with just getting FTP and apache to play nice in a multi-user environment.) PS: For the record, an issue I ran into when doing all of this was that if apache isn't running as the same user as the FTP account is saving as, there are permissions errors when FTP creates files, requiring the remote user to chmod the files to fix it. A logical fix would be to run apache in a special group, put all web users in this group, and have FTP access default to giving this group read/write access to everything like apache would expect, but I never could figure out how to accomplish this. Bonus points and cake if you know a solution.

  Read the article

• Ubuntu 12.04/12.10 can't detect windows or any other partitions(Asus z77 UEFI BIOS)

  - by user971155

  I've recently completed tinkering my new pc(motherboard ASUS z77 with UEFI BIOS) and unfortunately not everything works quite well. After installing windows 7 ultimate on a single primary partition(SATA drive) I decided to allocate one more logical partition for additional needs. When I tried doing it with the manager - it said that it couldn't allocate requested size even though I certainly asked for much less than it was available. I thought that it might have been a windows issue and proceded to installing Ubuntu 12.10 x64. When the graphical interface loaded it showed me a message stating that it can't find any other operating system on the drive. When I used custom partioning option it showed me none of my current partions(including that with windows). However, when I boot with "Try Ubuntu" feature it does find them ! I find it weird though. Here's what the console present me with: ubuntu@ubuntu:~$ sudo os-prober /dev/sda1:Windows 7 (loader):Windows:chain ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00072b98 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 100020223 49906688 7 HPFS/NTFS/exFAT /dev/sda3 100022270 1250263039 575120385 5 Extended /dev/sda4 566669312 1250263039 341796864 83 Linux I also tried creating partitions from disk utility which results in error: , Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=51211402240, size=1923000000, type=0x83 Entering MS-DOS parser (offset=0, size=640135028736) MSDOS_MAGIC found looking at part 0 (offset 1048576, size 104857600, type 0x07) new part entry looking at part 1 (offset 105906176, size 51104448512, type 0x07) new part entry looking at part 2 (offset 51211402240, size 588923274240, type 0x05) Entering MS-DOS extended parser (offset=51211402240, size=588923274240) readfrom = 51211402240 MSDOS_MAGIC found Exiting MS-DOS extended parser looking at part 3 (offset 290134687744, size 349999988736, type 0x83) new part entry Exiting MS-DOS parser MSDOS partition table detected containing partition table scheme = 1 got it Error: Can't have overlapping partitions. ped_disk_new() failed Here's what I get when I try to install the system i.stack.imgur.com/pjlb9.png, i.stack.imgur.com/g1lXN.png P.S. It's strange that I even can't create any more partitions neither with disk-utility nor with windows 7 native tools

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >