Search Results

Search found 49320 results on 1973 pages for 'system architecture'.

Page 1423/1973 | < Previous Page | 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430  | Next Page >

  • Ubuntu 11.10 power management does not recognize removal of power supply!

    - by sema
    I have a Lenovo Ideapad Z370 with Ubuntu 11.10 and the battery status indicator shows wrong information. Problem: The indicator always shows that the power supply is connected, even if it's not connected. The battery charges and discharges normally. However, the status information is wrong. When charging, the "time to charge" decreases, and when discharging the "time to charge" increases. If the power supply is connected the power statistics show: "Supply Yes" "Online Yes" If it is not connected it shows: "Supply Yes" "Online No" My trials: I tried reinstalling the indicator applet, but that doesn't help. Searching for solutions or similar problems didn't point out any help. Background: The problem occured after I switched the battery mode in Windows. (I use a dual boot system.) Lenovo drivers allow a "battery runtime mode" for maximum runtime and a "battery health mode" for maximum battery lifetime. I initially used the runtime mode, tried the health mode for some time, but switched back to the runtime mode. The problem occured after switching to health mode. Does anyone have an idea what is wrong? The problem is relevant for me as I get no information when battery status low and the computer runs out of energy without shutdown or hibernation. This is really a problem for me!

    Read the article

  • How I Work: Staying Productive Whilst Traveling

    - by BuckWoody
    I travel a lot. Not like some folks that are gone every week, mind you, although in the last month I’ve been to: Cambridge, UK; Anchorage, AK; San Jose, CA; Copenhagen, DK, Boston, MA; and I’m currently en-route to Anaheim, CA.  While this many places in a month is a bit unusual for me, I would say I travel frequently. I’ve travelled most of my 28+ years in IT, and at one time was a consultant traveling weekly.   With that much time away from my primary work location, I have to find ways to stay productive. Some might say “just rest – take a nap!” – but I’m not able to do that. For one thing, I’m a very light sleeper and I’ve never slept on a plane - even a 30+ hour trip to New Zealand in Business Class - so that just isn’t option. I also am not always in the plane, of course. There’s the hotel, the taxi/bus/train, the airport and then all that over again when I arrive. Since my regular jobs have many demands, I have to get work done.   Note: No, I’m not always focused on work. I need downtime just like everyone else. Sometimes I just think, watch a movie or listen to tunes – and I give myself permission to do that anytime – sometimes the whole trip. I have too fewheartbeats left in life to only focus on work – it’s just not that important, and neither am I. Some of these tasks are letters to friends and family, or other personal things. What I’m talking about here is a plan, not some task list I have to follow. When I get to the location I’m traveling to, I always build in as much time as I can to ensure I enjoy those sights and the people I’m with. I would find traveling to be a waste if not for that.   The Unrealistic Expectation As I would evaluate the trip I was taking – say a 6-8 hour flight – I would expect to get 10-12 hours of work done. After all, there’s the time at the airport, the taxi and so on, and then of course the time in the air with all of the room, power, internet and everything else I needed to get my work done. I would pile up tasks at home, pack my bags, and head happily to the magical land of the TSA.   Right. On return from the trip, I had accomplished little, had more e-mails and other work that had piled up, and I was tired, hungry, and unorganized. This had to change. So, I decided to do three things: Segment my work Set realistic expectations Plan accordingly  Segmenting By Available Resources The first task was to decide what kind of work I could do in each location – if any. I found that I was dependent on a few things to get work done, such as power, the Internet, and a place to sit down. Before I fly, I take some time at home to get all of the work I’d like to accomplish while away segmented into these areas, and print that out on paper, which goes in my suit-coat pocket along with a mechanical pencil. I print my tickets, and I’m all set for the adventure ahead. Then I simply do each kind of work whenever I’m in that situation. No power There are certain times when I don’t have power available. But not only that, I might not even be able to use most of my electronics. So I now schedule as many phone calls as I can for the taxi/bus/train ride and the airports as I can. I have a paper notebook (Moleskine, of course) and a pencil and I print out any notes or numbers I need prior to the trip. Once I’m airborne or at the airport, I work on my laptop. I check and respond to e-mails, create slides, write code, do architecture, whatever I can.  If I can’t use any electronics, or once the power runs out, I schedule time for reading. I can read at the airport or anywhere, actually, even in-flight or any other transport. I “read with a pencil”, meaning I take a lot of notes, which I liketo put in OneNote, but since in most cases I don’t have power, I use the Moleskine to do that. Speaking of which, sometimes as I’m thinking I come up with new topics, ideas, blog posts, or things to teach in my classes. Once again I take out the notebook and write it down. All of these notes get a check-mark when I get back to the office and transfer the writing to OneNote. I’ve tried those “smart pens” and so on to automate this, but it just never works out. Pencil and paper are just fine. As I mentioned, sometime I just need to think. I’ll do nothing, and let my mind wander, thinking of nothing in particular, or some math problem or science question I’m interested in. My only issue with this is that I communicate tothink, and I don’t want to drive people crazy by being that guy that won’t shut up, so I think in a different way. Power, but no Internet or Phone If I have power but no Internet or phone, I focus on the laptop and the tablet as before, and I also recharge my other gadgets. Power, Internet, Phone and a Place to Work At first I thought that when I arrived at the hotel or event I could get the same amount of work done that I do at the office. Not so. There’s simply too many distractions, things you need, or other issues that allow this. Of course, Ican work on any device, read, think, write or whatever, but I am simply not as productive as I am in my home office. So I plan for about 25-50% as much work getting done in this environment as I think I could really do. I’ve done some measurements, and this holds out to be true almost every time. The key is that I re-set my expectations (and my co-worker’s expectations as well) that this is the case. I use the Out-Of-Office notices to let people know that I’m just not going to be 100% at this time – it’s hard for everyone, but it’s more honest and realistic, and I’d rather they know that – and that I realize that – than to let them think I’m totally available. Because I’m not – I’m traveling. I don’t tend to put too much detail, because after all I don’t necessarily want to let people know when I’m not home :) but I do think it’s important to let people that depend on my know that I’ll get back with them later. I hope this helps you think through your own methodology of staying productive when you travel. Or perhaps you just go offline, and don’t worry about any of this – good for you! That’s completely valid as well.   (Oh, and yes, I wrote this at 35K feet, on Alaska Airlines on a trip. :)  Practice what you preach, Buck.)

    Read the article

  • New Book: Oracle Exalogic Elastic Cloud Handbook

    - by user12608550
    Oracle Exalogic Elastic Cloud Handbook, by Tom Plunkett, TJ Palazzolo, and Tejas Joshi, Oracle Press. The well-known characteristics and tiers of cloud computing have spawned myriad implementations by a host of vendors and system integrators. One of these, Oracle's Exalogic Elastic Cloud, part of Oracle's family of Engineered Systems, is a key component of Oracle's public and private cloud computing solutions, providing critical PaaS (Platform as a Service) features for cloud developers. These developers need guidance to take advantage of Exalogic's extensive capabilities, and the Oracle Exalogic Elastic Cloud Handbook, written by three highly experienced Oracle technologists, provides that guidance. Part One of the book covers Exalogic's hardware and software components, and includes a very useful chapter on deployment examples, describing best practices for scalabiity, availability, backup and recovery, and multi-tenant security, including integration with other Oracle Engineered Systems and products such as Exadata and storage subsystems. Part Two is a thorough guide to Exalogic installation features, configuration and monitoring, packaged application software management, and scalable application development. The book also provides an extensive list of online resources, including pointers to Web sites, whitepapers, instructional videos, and other Oracle documentation. So, if you're planning to implement Exalogic as part of your cloud infrastructure, or are considering such, you'll find lots of sage advice and best practices in this handbook.

    Read the article

  • Documenting your database with Visual Studio 2012 SSDT tools

    - by krislankford
    The title of this post is interesting and something I am wishing you and your colleagues had a better way to do. I understand as I am asked this question frequently. I couple of weeks ago I was asked the same question by a customer who documents their database using the ApexSQL Doc tools which uses the extended properties on objects to create automated documentation. I thought that was super interesting and went down the path to see how we could could support the creation of this documentation while leveraging the Visual Studio 2012 SSDT Tools. What I found is was rather intriguing. There is a property called “Description” on all objects in the SSDT tools. This property is rather subtle and I am betting overlooked. To be honest, this property has probably been there for a while and I just never discovered it. Adding text to this '”Description” property it allows Visual Studio to create the commands for the extended properties directly to your schema which should be version controlled. As I did more digging there seemed to be extended properties at every level in the SQL database objects. This fills some rather challenging gaps and allows organizations to manage SQL Schema using the Visual Studio SQL database tools while allowing a way to automatically document the database. This will also work in the automation of the creation and alter scripts that can be generated as part f an automated build system. Now we essentially get a way to store, build and document the database in a nice little ALM package. Happy Coding!

    Read the article

  • Advanced Level Troubleshooting for Oracle Process Manufacturing Financials

    - by Annemarie Provisero
    ADVISOR WEBCAST: Advanced Level Troubleshooting for Oracle Process Manufacturing Financials PRODUCT FAMILY: Oracle Process Manufacturing     February 16, 2011 at 8 am PT, 9 am MT, 11 am ET This one-hour session provides basic to advanced level troubleshooting information for Functional Users, System Administrators, DBAs and Customers. TOPICS WILL INCLUDE: Find Log File and Error messages for important processes in OPM Financials. Important SQL queries and filtering transaction related issues. Enabling Debug mode in OPM Financials and SLA. A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Click here to register for this session ------------------------------------------------------------------------------------------------------------- The above webcast is a service of the E-Business Suite Communities in My Oracle Support.For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

    Read the article

  • OUM is Flexible and Scalable

    - by user535886
    Flexible and Scalable Traditionally, projects have been focused on satisfying the contents of a requirements document or rigorously conforming to an existing set of work products. Often, especially where iterative and incremental techniques have not been employed, these requirements may be inaccurate, the previous deliverables may be flawed, or the business needs may have changed since the start of the project. Fitness for business purpose, derived from the Dynamic Systems Development Method (DSDM) framework, refers to the focus of delivering necessary functionality within a required timebox. The solution can be more rigorously engineered later, if such an approach is acceptable. Our collective experience shows that applying fit-for-purpose criteria, rather than tight adherence to requirements specifications, results in an information system that more closely meets the needs of the business. In OUM, this principle is extended to refer to the execution of the method processes themselves. Project managers and practitioners are encouraged to scale OUM to be fit-for-purpose for a given situation. It is rarely appropriate to execute every activity within OUM. OUM provides guidance for determining the core set of activities to be executed, the level of detail targeted in those activities and their associated tasks, and the frequency and type of end user deliverables. The project workplan should be developed from this core. The plan should then be scaled up, rather than tailored down, to the level of discipline appropriate to the identified risks and requirements. Even at the task level, models and work products should be completed only to the level of detail required for them to be fit-for-purpose within the current iteration or, at the project level, to suit the business needs of the enterprise and to meet the contractual obligations that govern the project. OUM provides well defined templates for many of its tasks. Use of these templates is optional as determined by the context of the project. Work products can easily be a model in a repository, a prototype, a checklist, a set of application code, or, in situations where a high degree of agility is warranted, simply the tacit knowledge contained in the brain of an analyst or practitioner. For further reading on agility, see Balancing Agility and Discipline: A guide fro the Perplexed.

    Read the article

  • vector rotations for branches of a 3d tree

    - by freefallr
    I'm attempting to create a 3d tree procedurally. I'm hoping that someone can check my vector rotation maths, as I'm a bit confused. I'm using an l-system (a recursive algorithm for generating branches). The trunk of the tree is the root node. It's orientation is aligned to the y axis. In the next iteration of the tree (e.g. the first branches), I might create a branch that is oriented say by +10 degrees in the X axis and a similar amount in the Z axis, relative to the trunk. I know that I should keep a rotation matrix at each branch, so that it can be applied to child branches, along with any modifications to the child branch. My questions then: for the trunk, the rotation matrix - is that just the identity matrix * initial orientation vector ? for the first branch (and subsequent branches) - I'll "inherit" the rotation matrix of the parent branch, and apply x and z rotations to that also. e.g. using glm::normalize; using glm::rotateX; using glm::vec4; using glm::mat4; using glm::rotate; vec4 vYAxis = vec4(0.0f, 1.0f, 0.0f, 0.0f); vec4 vInitial = normalize( rotateX( vYAxis, 10.0f ) ); mat4 mRotation = mat4(1.0); // trunk rotation matrix = identity * initial orientation vector mRotation *= vInitial; // first branch = parent rotation matrix * this branches rotations mRotation *= rotate( 10.0f, 1.0f, 0.0f, 0.0f ); // x rotation mRotation *= rotate( 10.0f, 0.0f, 0.0f, 1.0f ); // z rotation Are my maths and approach correct, or am I completely wrong? Finally, I'm using the glm library with OpenGL / C++ for this. Is the order of x rotation and z rotation important?

    Read the article

  • How can I resolve component types in a way that supports adding new types relatively easily?

    - by John
    I am trying to build an Entity Component System for an interactive application developed using C++ and OpenGL. My question is quite simple. In my GameObject class I have a collection of Components. I can add and retrieve components. class GameObject: public Object { public: GameObject(std::string objectName); ~GameObject(void); Component * AddComponent(std::string name); Component * AddComponent(Component componentType); Component * GetComponent (std::string TypeName); Component * GetComponent (<Component Type Here>); private: std::map<std::string,Component*> m_components; }; I will have a collection of components that inherit from the base Components class. So if I have a meshRenderer component and would like to do the following GameObject * warship = new GameObject("myLovelyWarship"); MeshRenderer * meshRenderer = warship->AddComponent(MeshRenderer); or possibly MeshRenderer * meshRenderer = warship->AddComponent("MeshRenderer"); I could be make a Component Factory like this: class ComponentFactory { public: static Component * CreateComponent(const std::string &compTyp) { if(compTyp == "MeshRenderer") return new MeshRenderer; if(compTyp == "Collider") return new Collider; return NULL; } }; However, I feel like I should not have to keep updating the Component Factory every time I want to create a new custom Component but it is an option. Is there a more proper way to add and retrieve these components? Is standard templates another solution?

    Read the article

  • Slicing the EDG

    - by Antony Reynolds
    Different SOA Domain Configurations In this blog entry I would like to introduce three different configurations for a SOA environment.  I have omitted load balancers and OTD/OHS as they introduce a whole new round of discussion.  For each possible deployment architecture I have identified some of the advantages. Super Domain This is a single EDG style domain for everything needed for SOA/OSB.   It extends the standard EDG slightly but otherwise assumes a single “super” domain. This is basically the SOA EDG.  I have broken out JMS servers and Coherence servers to improve scalability and reduce dependencies. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if rest of domain is unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service. Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Benefits Single Administration Point (1 Admin Server) Closely follows EDG with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Drawbacks Patching is an all or nothing affair. Startup time for SOA may be slow if large number of composites deployed. Multiple Domains This extends the EDG into multiple domains, allowing separate management and update of these domains.  I see this type of configuration quite often with customers, although some don't have OWSM, others don't have separate Coherence etc. SOA & BAM are kept in the same domain as little benefit is obtained by separating them. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if other domains are unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service. Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Benefits Follows EDG but in separate domains and with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Patch lifecycle of OSB/SOA/JMS are no longer lock stepped. JMS may be kept running independently of other domains allowing applications to insert messages fro later consumption by SOA/OSB. OSB may be kept running independent of other domains, allowing service virtualization to continue independent of other domains availability. All domains use same OWSM policy store (MDS-WSM). Drawbacks Multiple domains to manage and configure. Multiple Admin servers (single view requires use of Grid Control) Multiple Admin servers/WSM clusters waste resources. Additional homes needed to enjoy benefits of separate patching. Cross domain trust needs setting up to simplify cross domain interactions. Startup time for SOA may be slow if large number of composites deployed. Shared Service Environment This model extends the previous multiple domain arrangement to provide a true shared service environment.This extends the previous model by allowing multiple additional SOA domains and/or other domains to take advantage of the shared services.  Only one non-shared domain is shown, but there could be multiple, allowing groups of applications to share patching independent of other application groups. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if other domains are unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Shared SOA Domain hosts Human Workflow Tasks BAM Common "utility" composites Single OSB domain provides "Enterprise Service Bus" All domains use same OWSM policy store (MDS-WSM) Benefits Follows EDG but in separate domains and with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Patch lifecycle of OSB/SOA/JMS are no longer lock stepped. JMS may be kept running independently of other domains allowing applications to insert messages fro later consumption by SOA/OSB. OSB may be kept running independent of other domains, allowing service virtualization to continue independent of other domains availability. All domains use same OWSM policy store (MDS-WSM). Supports large numbers of deployed composites in multiple domains. Single URL for Human Workflow end users. Single URL for BAM end users. Drawbacks Multiple domains to manage and configure. Multiple Admin servers (single view requires use of Grid Control) Multiple Admin servers/WSM clusters waste resources. Additional homes needed to enjoy benefits of separate patching. Cross domain trust needs setting up to simplify cross domain interactions. Human Workflow needs to be specially configured to point to shared services domain. Summary The alternatives in this blog allow for patching to have different impacts, depending on the model chosen.  Each organization must decide the tradeoffs for itself.  One extreme is to go for the shared services model and have one domain per SOA application.  This requires a lot of administration of the multiple domains.  The other extreme is to have a single super domain.  This makes the entire enterprise susceptible to an outage at the same time due to patching or other domain level changes.  Hopefully this blog will help your organization choose the right model for you.

    Read the article

  • Differences when Running with OutputCache managed module under ASP.NET IIS7.x with Cache-control header

    - by Shawn Cicoria
    This post is to report some differences when using MVC or IHttpHandlers if you’re attempting to set the Cache-control : max-age or s-maxage value under IIS7.x using the HttpResponse.Cache methods. [UPDATE]: 2011-3-14 – The missing piece was calling  Response.Cache.SetSlidingExpiration(true) as follows: context.Response.Cache.SetCacheability(HttpCacheability.Public); context.Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); context.Response.ContentType = "image/jpeg"; context.Response.Cache.SetSlidingExpiration(true);   Under IIS7.x if you us one of the following 2 methods, you will only get a Cache-ability of “public”.  public ActionResult Image2() { MemoryStream oStream = new MemoryStream(); using (Bitmap obmp = ImageUtil.RenderImage("Respone.Cache.Setxx calls", 5, DateTime.Now)) { obmp.Save(oStream, ImageFormat.Jpeg); oStream.Position = 0; Response.Cache.SetCacheability(HttpCacheability.Public); Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); return new FileStreamResult(oStream, "image/jpeg"); } } Method 2 – which is just a plain old HttpHandler and really isn’t MVC3, but under the same MVC ASP.NET application, same result. public class image : IHttpHandler { public void ProcessRequest(HttpContext context) { using (var image = ImageUtil.RenderImage("called from IHttpHandler direct", 5, DateTime.Now)) { context.Response.Cache.SetCacheability(HttpCacheability.Public); context.Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); context.Response.ContentType = "image/jpeg"; image.Save(context.Response.OutputStream, ImageFormat.Jpeg); } } } Using the following under MVC3 (I haven’t tried under earlier versions) will work by applying the OutputCacheAttribute to your Action: [OutputCache(Location = OutputCacheLocation.Any, Duration = 300)] public ActionResult Image1() { MemoryStream oStream = new MemoryStream(); using (Bitmap obmp = ImageUtil.RenderImage("called with OutputCacheAttribute", 5, DateTime.Now)) { obmp.Save(oStream, ImageFormat.Jpeg); oStream.Position = 0; return new FileStreamResult(oStream, "image/jpeg"); } } To remove the “OutputCache” module, you use the following in your web.config: <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules runAllManagedModulesForAllRequests="true"> <!--<remove name="OutputCache"/>--> </modules>

    Read the article

  • Zero bytes on home partition

    - by Michael Z
    I decided to replace the hard drive on my machine running Ubuntu 12.04 LTS . After using the new hard drive for a few days, I noticed that the new hard drive has bad sectors. So I decided to plug my old hard drive back in. First, I plugged both hard drives in and copied some data files from the new hard drive to the old one. After unplugging the new hard drive, I booted the computer with the old hard drive, and here I got a surprise: I can see 0 bytes available on my /home partition! The df utility shows that the /home partition has 0 available bytes. I have tried to move some files. But I still has 0 bytes on /home! However, GParted correctly shows that the available size is near 2Gb. UPDATE 1: To my surprise, System Monitor shows me that approximately 2 Gb are free and 0 bytes are available on the /home partition. It's slightly shocked me! Are "free" and "available" not the same? Any help is really appreciated!

    Read the article

  • How to make pulseaudio and ubuntu detect the same audio device as alsa driver

    - by Kiwy
    I use Ubuntu 14.04 x64 and I use gnome-shell on my laptop. I have a Bose companion 5 (which is basically a USB sound system) and a HDMI port, both does work perfectly when I just boot with the cable plugin. However, when my laptop go to sleep or get unplugged from those two outputs, if I plug back the device, I end up without any hardware detection (only the built-in speakers) from pulse and gnome-shell sound output selector while if I use alsamixer, the device look up and ready. gstreamer-properties allow me to select and test effectively any device but while alsa recognize any device on the run, pulse is not capable of handling things correctly, my question is then: How can I make pulse detect and use the same hardware as alsa, or how to remove completely and gracefully pulseaudio (meaning volume applet running in gnome shell) I don't mind if the project implies to recompile half gnome shell if it implies those audio outputs work all the time. Pulse does not list my soundcard when I use command pactl list cards while the module plug&play for sound card is loaded in pactl list modules. I really don't know what to do, the behavior seems pretty random.

    Read the article

  • Change X settings to boot into laptop with non working screen using an external monitor

    - by dassouki
    My laptop committed suicide. Is there a way I can boot into my ubuntu using an external screen? Ubuntu 10.10 video: Nvidia 9500 gm i think I can get dual screen upto and until the ubuntu login screen at which point it goes back into laptop display only. Then I can just type and enter my password. The system (i assume boots into ubuntu) but I got no way of going onto the x or nvidia settings to change my display to external monitor EDIT well I booted into terminal using control shift F1 i think, and now I'm trying to reporgram x.org, but strangely it seems bland with not a lot of settings in it EDIT 2 xrandr returns "Can't open display" EDit 3 after some messing around with xrandr and xinit ... my x.org only displays one monitor instead of two in its settings although both, i.e. the laptop and external screens are both connected. EDIT 4 it seems that x.org now has a "screen" and "monitor" section, I can't seem to be able to boot linux into monitor. I get a "Monitor is not a valid keyword" in this subsection

    Read the article

  • Host grub error after installing Virtualbox - Non Recoverable

    - by BiggJJ
    I have been unable to fine a resolution to my problem and I have been suffering from it for a while. I can install Virtualbox and can reboot the machine successfully straight after. Once the system is back up I can run Virtualbox ans start working towards creating a new machine. So, say I am installing an XP machine. 1 time out of 10 it will work successfully first time. If it doesn't work (i.e BSOD), I delete the machine and start again. But when the time comes to finish up and switch off my computer, but it doesn't happen gracefully. As soon as I click shutdown, The machine dies. When the machine is switched back on I get: Error: no such device grub resuce I boot up my Grub Fix Live CD, but the grub reinstaller get stuck on searching for partitions, gparted just get stuck looking for devices and even fdisk -l drops a line and displays nothing and is the same. Stuck. The only way I know how to sort it is by re-installing Ubuntu. Has anyone had this problem, or know how to fix it?

    Read the article

  • What features are helpful when performing remote debugging / diagnostics?

    - by Pemdas
    Obviously, the easiest way to solve a bug is to be able to reproduce it in-house. However, sometimes that is not practical. For starters, users are often not very good at providing you with useful information. Customer Service: "what seems to be the issue?" User: "It crashed!" To further compound that, sometimes the bug only occurs under certain environmentally conditions that can not be adequately replicated in-house. With that in mind, it is important to build some sort of diagnostic framework into your product. What types of built-in diagnostic tools have you used or seen used? Logging seems to be the predominate method, which makes sense. We have a fairly sophisticated logging frame work in place with different levels of verbosity and the ability to filter on specific modules (actually we can filter down to the granularity of a single file). Error logs are placed strategically to manufacture a pretty good representation of a stack trace when an error occurs. We don't have the luxury of 10 million terabytes of disk space since I work on embedded platforms, so we have two ways of getting them off the system: a serial port and a syslog server. However, an issue we run into sometimes is actually getting the user to turn the logs on. Our current framework often requires some user interaction.

    Read the article

  • Search in Projects API

    - by Geertjan
    Today I got some help from Jaroslav Havlin, the creator of the new "Search in Projects API". Below are the steps to create a search provider that finds recently modified files, via a new tab in the "Find in Projects" dialog: Here's how to get to the above result. Create a new NetBeans module project named "RecentlyModifiedFilesSearch". Then set dependencies on these libraries: Search in Projects API Lookup API Utilities API Dialogs API Datasystems API File System API Nodes API Create and register an implementation of "SearchProvider". This class tells the application the name of the provider and how it can be used. It should be registered via the @ServiceProvider annotation.Methods to implement: Method createPresenter creates a new object that is added to the "Find in Projects" dialog when it is opened. Method isReplaceSupported should return true if this provider support replacing, not only searching. If you want to disable the search provider (e.g., there aren't required external tools available in the OS), return false from isEnabled. Method getTitle returns a string that will be shown in the tab in the "Find in Projects" dialog. It can be localizable. Example file "org.netbeans.example.search.ExampleSearchProvider": package org.netbeans.example.search; import org.netbeans.spi.search.provider.SearchProvider; import org.netbeans.spi.search.provider.SearchProvider.Presenter; import org.openide.util.lookup.ServiceProvider; @ServiceProvider(service = SearchProvider.class) public class ExampleSearchProvider extends SearchProvider { @Override public Presenter createPresenter(boolean replaceMode) { return new ExampleSearchPresenter(this); } @Override public boolean isReplaceSupported() { return false; } @Override public boolean isEnabled() { return true; } @Override public String getTitle() { return "Recent Files Search"; } } Next, we need to create a SearchProvider.Presenter. This is an object that is passed to the "Find in Projects" dialog and contains a visual component to show in the dialog, together with some methods to interact with it.Methods to implement: Method getForm returns a JComponent that should contain controls for various search criteria. In the example below, we have controls for a file name pattern, search scope, and the age of files. Method isUsable is called by the dialog to check whether the Find button should be enabled or not. You can use NotificationLineSupport passed as its argument to set a display error, warning, or info message. Method composeSearch is used to apply the settings and prepare a search task. It returns a SearchComposition object, as shown below. Please note that the example uses ComponentUtils.adjustComboForFileName (and similar methods), that modifies a JComboBox component to act as a combo box for selection of file name pattern. These methods were designed to make working with components created in a GUI Builder comfortable. Remember to call fireChange whenever the value of any criteria changes. Example file "org.netbeans.example.search.ExampleSearchPresenter": package org.netbeans.example.search; import java.awt.FlowLayout; import javax.swing.BoxLayout; import javax.swing.JComboBox; import javax.swing.JComponent; import javax.swing.JLabel; import javax.swing.JPanel; import javax.swing.JSlider; import javax.swing.event.ChangeEvent; import javax.swing.event.ChangeListener; import org.netbeans.api.search.SearchScopeOptions; import org.netbeans.api.search.ui.ComponentUtils; import org.netbeans.api.search.ui.FileNameController; import org.netbeans.api.search.ui.ScopeController; import org.netbeans.api.search.ui.ScopeOptionsController; import org.netbeans.spi.search.provider.SearchComposition; import org.netbeans.spi.search.provider.SearchProvider; import org.openide.NotificationLineSupport; import org.openide.util.HelpCtx; public class ExampleSearchPresenter extends SearchProvider.Presenter { private JPanel panel = null; ScopeOptionsController scopeSettingsPanel; FileNameController fileNameComboBox; ScopeController scopeComboBox; ChangeListener changeListener; JSlider slider; public ExampleSearchPresenter(SearchProvider searchProvider) { super(searchProvider, false); } /** * Get UI component that can be added to the search dialog. */ @Override public synchronized JComponent getForm() { if (panel == null) { panel = new JPanel(); panel.setLayout(new BoxLayout(panel, BoxLayout.PAGE_AXIS)); JPanel row1 = new JPanel(new FlowLayout(FlowLayout.LEADING)); JPanel row2 = new JPanel(new FlowLayout(FlowLayout.LEADING)); JPanel row3 = new JPanel(new FlowLayout(FlowLayout.LEADING)); row1.add(new JLabel("Age in hours: ")); slider = new JSlider(1, 72); row1.add(slider); final JLabel hoursLabel = new JLabel(String.valueOf(slider.getValue())); row1.add(hoursLabel); row2.add(new JLabel("File name: ")); fileNameComboBox = ComponentUtils.adjustComboForFileName(new JComboBox()); row2.add(fileNameComboBox.getComponent()); scopeSettingsPanel = ComponentUtils.adjustPanelForOptions(new JPanel(), false, fileNameComboBox); row3.add(new JLabel("Scope: ")); scopeComboBox = ComponentUtils.adjustComboForScope(new JComboBox(), null); row3.add(scopeComboBox.getComponent()); panel.add(row1); panel.add(row3); panel.add(row2); panel.add(scopeSettingsPanel.getComponent()); initChangeListener(); slider.addChangeListener(new ChangeListener() { @Override public void stateChanged(ChangeEvent e) { hoursLabel.setText(String.valueOf(slider.getValue())); } }); } return panel; } private void initChangeListener() { this.changeListener = new ChangeListener() { @Override public void stateChanged(ChangeEvent e) { fireChange(); } }; fileNameComboBox.addChangeListener(changeListener); scopeSettingsPanel.addChangeListener(changeListener); slider.addChangeListener(changeListener); } @Override public HelpCtx getHelpCtx() { return null; // Some help should be provided, omitted for simplicity. } /** * Create search composition for criteria specified in the form. */ @Override public SearchComposition<?> composeSearch() { SearchScopeOptions sso = scopeSettingsPanel.getSearchScopeOptions(); return new ExampleSearchComposition(sso, scopeComboBox.getSearchInfo(), slider.getValue(), this); } /** * Here we return always true, but could return false e.g. if file name * pattern is empty. */ @Override public boolean isUsable(NotificationLineSupport notifySupport) { return true; } } The last part of our search provider is the implementation of SearchComposition. This is a composition of various search parameters, the actual search algorithm, and the displayer that presents the results.Methods to implement: The most important method here is start, which performs the actual search. In this case, SearchInfo and SearchScopeOptions objects are used for traversing. These objects were provided by controllers of GUI components (in the presenter). When something interesting is found, it should be displayed (with SearchResultsDisplayer.addMatchingObject). Method getSearchResultsDisplayer should return the displayer associated with this composition. The displayer can be created by subclassing SearchResultsDisplayer class or simply by using the SearchResultsDisplayer.createDefault. Then you only need a helper object that can create nodes for found objects. Example file "org.netbeans.example.search.ExampleSearchComposition": package org.netbeans.example.search; public class ExampleSearchComposition extends SearchComposition<DataObject> { SearchScopeOptions searchScopeOptions; SearchInfo searchInfo; int oldInHours; SearchResultsDisplayer<DataObject> resultsDisplayer; private final Presenter presenter; AtomicBoolean terminated = new AtomicBoolean(false); public ExampleSearchComposition(SearchScopeOptions searchScopeOptions, SearchInfo searchInfo, int oldInHours, Presenter presenter) { this.searchScopeOptions = searchScopeOptions; this.searchInfo = searchInfo; this.oldInHours = oldInHours; this.presenter = presenter; } @Override public void start(SearchListener listener) { for (FileObject fo : searchInfo.getFilesToSearch( searchScopeOptions, listener, terminated)) { if (ageInHours(fo) < oldInHours) { try { DataObject dob = DataObject.find(fo); getSearchResultsDisplayer().addMatchingObject(dob); } catch (DataObjectNotFoundException ex) { listener.fileContentMatchingError(fo.getPath(), ex); } } } } @Override public void terminate() { terminated.set(true); } @Override public boolean isTerminated() { return terminated.get(); } /** * Use default displayer to show search results. */ @Override public synchronized SearchResultsDisplayer<DataObject> getSearchResultsDisplayer() { if (resultsDisplayer == null) { resultsDisplayer = createResultsDisplayer(); } return resultsDisplayer; } private SearchResultsDisplayer<DataObject> createResultsDisplayer() { /** * Object to transform matching objects to nodes. */ SearchResultsDisplayer.NodeDisplayer<DataObject> nd = new SearchResultsDisplayer.NodeDisplayer<DataObject>() { @Override public org.openide.nodes.Node matchToNode( final DataObject match) { return new FilterNode(match.getNodeDelegate()) { @Override public String getDisplayName() { return super.getDisplayName() + " (" + ageInMinutes(match.getPrimaryFile()) + " minutes old)"; } }; } }; return SearchResultsDisplayer.createDefault(nd, this, presenter, "less than " + oldInHours + " hours old"); } private static long ageInMinutes(FileObject fo) { long fileDate = fo.lastModified().getTime(); long now = System.currentTimeMillis(); return (now - fileDate) / 60000; } private static long ageInHours(FileObject fo) { return ageInMinutes(fo) / 60; } } Run the module, select a node in the Projects window, press Ctrl-F, and you'll see the "Find in Projects" dialog has two tabs, the second is the one you provided above:

    Read the article

  • Order in which passphrase is asked for encrypted volumes

    - by Lars Kotthoff
    I have installed 12.10 on a machine with two disks. The root partition is on one disk, the swap partition on the other. Both disks are encrypted and I have added the corresponding entries to /etc/crypttab. During boot, it asks for the passphrase for the disk with the root filesystem. Then it continues booting and gets to the login screen before I get a chance to enter the passphrase for the other disk. After logging in, I verified that it was actually waiting for me to enter the passphrase for that second partition (askpass process is running). But at that point, I have no way of entering the passphrase anymore. The manpage for crypttab suggests that the order in which the volumes are specified matters, so I changed it to have the swap disk first. I updated the initramfs and grub afterwards, but it didn't make any difference. How can I specify the order in which the encrypted partitions are unlocked? I'm looking for a solution that either asks for the swap passphrase first or tells the system to wait until all encrypted partitions are unlocked before displaying the login screen.

    Read the article

  • Blank screen after GRUB (64 bit) - cannot install Ubuntu

    - by peGGi
    My laptop's specs: Lenovo IdeaPad Z570 Intel Core i5-2410M @ 2.3Ghz 6 Gb RAM DDR3 640 Gb ATAPI Hard-disk Drive @ 5,200 RPM NVIDIA GeForce G520M with Optimus switching technology Broadcom 802.11n Network Adapter REALTEK soundcard Windows 7 Home Premium 64-bit I downloaded Ubuntu Studio 11.04 and burned the iso image onto two different DVDs, using two different programs (one DVD is RW, the other is just R). I verified the hash MD5sum thing. I get as far as GRUB with the 4 options (install, advanced install, disk verification, system rescue) but no matter which one I select, I get a blank screen and nothing happens. The DVD drive spins down after about 30 seconds. Also just before the GRUB screen I get a message saying Error: "Prefix" is not set. I'm not sure if that's relevant. I have tried all the options using both DVDs. Same thing happens. I have changed the graphics setting in BIOS to UMA or Optimus, but still happens either way. I've tried booting with the wireless switch turned off, same thing happens. I downloaded 'vanilla' Ubuntu 64-bit and burned onto a CD, and the same thing happens. I have downloaded Ubuntu 32-bit and I am able to boot from the live CD (interestingly the wireless card won't work, but that's maybe another issue). I have searched extensively through these forums and other sites but I can't see anything that will help me. Is there something I'm missing? I'd really appreciate help on this. The laptop is less than 2 weeks old. I was so looking forward to getting Ubuntu Studio up and running. I've gone about as far as my technical abilities will allow.

    Read the article

  • Sending changes to a terrain heightmap over UDP

    - by Floomi
    This is a more conceptual, thinking-out-loud question than a technical one. I have a 3D heightmapped terrain as part of a multiplayer RTS that I would like to terraform over a network. The terraforming will be done by units within the gameworld; the player will paint a "target heightmap" that they'd like the current terrain to resemble and units will deform towards that on their own (a la Perimeter). Given my terrain is 257x257 vertices, the naive approach of sending heights when they change will flood the bandwidth very quickly - updating a quarter of the terrain every second will hit ~66kB/s. This is clearly way too much. My next thought was to move to a brush-based system, where you send e.g. the centre of a circle, its radius, and some function defining the influence of the brush from the centre going outwards. But even with reliable UDP the "start" and "stop" messages could still be delayed. I guess I could compare timestamps and compensate for this, although it'd likely mean that clients would deform verts too much on their local simulations and then have to smooth them back to the correct heights. I could also send absolute vert heights in the "start" and "stop" messages to guarantee correct data on the clients. Alternatively I could treat brushes in a similar way to units, and do the standard position + velocity + client-side prediction jazz on them, with the added stipulation that they deform terrain within a certain radius around them. The server could then intermittently do a pass and send (a subset of) recently updated verts to clients as and when there's bandwidth to spare. Any other suggestions, or indications that I'm on the right (or wrong!) track with any of these ideas would be greatly appreciated.

    Read the article

  • SharePoint Saturday DC 2010 Slides, Demo Scripts, and Pictures

    - by Brian Jackett
    Wow! This past weekend I attended SharePoint Saturday Washington DC (SPSDC) which was quite an event to say the least.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my fifth SharePoint Saturday attended and fourth I’ve spoken at.  SPSDC was a bit different than most SharePoint Saturdays mostly due to the scale of it.  We had almost 950 attendees, over 80 speakers presenting close to 90 sessions, and dozens of sponsors.  A big thanks goes out to the organizers of this event.  They put in a lot of hard work and time to pull this event off and should be very proud of the end result.      For SPSDC I presented “The Power of PowerShell + SharePoint 2007”.  I want to thank all of the attendees of my session for coming and asking some great questions.  Below you can find the slides and demo scripts for this session.  I also took some photos throughout the day (not as many as usual since so much going on) so check them out.  If you have any follow up questions feel free to drop me a line in the comments or the contact link at the top of the site.   Slides and Scripts Click here for the demo scripts and slides posted on my SkyDrive. VERY IMPORTANT NOTE: One thing I forgot to mention in my presentation.  In order to run code against the SharePoint API you need to load the Microsoft.SharePoint.dll assembly first.  Run the below command on the PowerShell console line to complete that:   [void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") Photos Facebook album -or- My album on Windows Live site (higher res shots). View Full Album         -Frog Out

    Read the article

  • Do you store mysql exports in your version control tool for reverting to in event of error?

    - by Rob
    We run an internal web server with in-house software to run a manufacturing line. When new product features are to be added, either or both of the following occur: changes to the in-house server software may be required to support these - these are for significant changes in functionality, being code drive. changes to the MySQL database for new entries for the part numbers, these are for smaller changes, configurations, changes to already existing values and parameters -- such changes don't require code changes. Ideally we'd want our changes to be here rather than in item 1. Item 1 is version controlled in Subversion, so previous revisions can be referred to for rolling back to in the event of problems introduced in the latest revision. But what about changes to the MySQL database? We have quality processes to ensure that such changes are error-free but there is always a chance that errors can pass through, e.g. mistake in data entry or faults with the code that uses the MySQL corrupting the database etc. We have a automated backup every 6 hours but what if we want more manual defined checkpoints in between these intervals, we could use the same backup system but I wondered if folks here used other methods to store previous states of databases, e.g. exporting the database as a plain text SQL dump -- at least with this method it would be possible to see diffs e.g. in Beyond Compare for trouble shooting. Thoughts?

    Read the article

  • 12.04 LTS boot hangs at "SP5100 TCO timer: mmio address 0xfec000f0 already in use", didn't yesterday

    - by DarkIron112
    Dual-booting Windows 7 and Ubuntu 12.04 LTS. I went to reboot from Win to Ubu, and found a few interesting things. My POST screen is covered in blocks of epileptic colors until I hit GRUB, which continues when I try to boot into Ubuntu. These color blocks don't appear when I use my on-board VGA, so I'll just attribute to that. Grub dimensions are swapped (card vs onboard, probably), but, when interfacing with onboard VGA, the Grub Timeout Counter works and when using my card, it does not (see "[!!!]" below for more information) Booting into Ubuntu directly causes the error: SP5100 TCO timer: mmio address 0xfec000f0 already in use Booting into recovery mode, meanwhile, and then "resuming normal boot" gets me to the desktop without native 1440x900 resolution and graphic drivers can't tell the monitor it's looking at (I assume this is because it's not a full graphic boot, and as it says, some drivers won't run?) [!!!] When I reboot after going into recovery mode, the countdown timer works ONCE, puts me back into default ubuntu boot, and then does not work again until after another recovery-mode boot. Windows 7 can boot perfectly with no issues whatsoever from epilepsy color blocks or driver detection. This makes me wonder /why/ the POST screen can't handle my video card anymore. Amidst all the diagnostics, I opened my case and re-seated the videocard securely, ensuring it wasn't a loose connection-- But this did nothing to help me. Hardware I am running an NVidia GeForce GTX 8800 video card in a PCI slot. I have 4.8GiB memory, an AMD Athlon II Quad-core 640 Processor, on an MSI K9N6GM Series Mobo. Onboard video is an NVidia GeForce MCP61(V/S/P) card. Note: I did not have any of these problems yesterday, and I have been using Ubuntu intensively for a week, though it's been working flawlessly for months. I've recently been using it to mod my Android phone, perhaps I messed something up in the file system?

    Read the article

  • Cannot restart Ubuntu after replacing Unity with Gnome and purging lightdm

    - by OtagoHarbour
    I am running Ubuntu 11.10. I used the directions here to replace Unity with Gnome. It seemed to work fine until the end of step 2 when I rebooted the computer. When I chose the default option, I just got a black screen. When I choose the restore option and then "Restore normal boot" I get Starting load fallback graphics devices [fail] Starting GNOME Display Manager [ok] Starting Userspace bootsplash [ok] Stopping GNOME Display Manager [ok] Stopping Userspace bootsplash [ok] Starting web server apach22 [fail] (among a lot of OKs) It finally gets to Stopping System V runlevel compatibility [ok] where it hangs. I left it overnight and just had a blank screen when I checked it in the morning. I can "Drop to root shell prompt" and "Drop to root shell prompt with networking". I did see here that one should be able to fix the problem by choosing remount and then doing apt-get install lightdm I tried this as root shell with and without networking and got the message Err http://us.archive.ubuntu.com/ubuntu/ oneric-updates/main lightdm i386 1.0.6-0ubuntu1.7 Could not resolve 'us.archive.ubuntu.com/ubuntu' What is the best way to resolve this problem? Thanks, Peter.

    Read the article

  • Ubuntu doesn't load, can't even open a terminal to type commands, even after boot repair

    - by Sky
    When I start Ubuntu I only get my desktop picture and am unable to open a terminal to type any commands. When I try a Guest session all I get is a red Ubuntu backdrop, nothing else. I tried boot repair but no improvement. Summary information following boot repair: http://paste.ubuntu.com/8109809/ I can paste some of it here if someone can tell me which part of it is relevant. This all occurred after I tried to remove compizconfig (which I might not have completed), because it's been using up my CPU (running at 50-60% with compiz at the top in System monitor. My laptop has been running very slow since installing Ubuntu so I've been trying to fix that, also website videos play slow and the startup of Ubuntu has been faulty. I also installed a proprietory Nvidia driver (304) before this launcher issue occurred, in an effort to fix my video problem (didn't help anything). Laptop is Dell 620m with Intel Core 2; 1.83GHz, 2 GB RAM, Ubuntu 14.04 (new to Linux); 66GB Ubuntu partition. Everything works fine on the small XP partition of my laptop, but I've moved all my files to the larger Ubuntu portion. I wanted to try some answers I found to similar questions but they all seem to involve commands in a terminal and I can't open a terminal. How can I get the launcher back, along with access to my programmes etc? Thank you for any help.

    Read the article

  • Software development project inception phase

    - by john ryan
    Currently our team develops Web Applications and now we are going to Windows Forms applications. I have created the inception phase for our Windows Forms project structure. eg: ApplicationSolution --> Security Project(Login Authentication) a. Users will be registered with different applications in our application database. eg: ProjectApplicationId|ProjectName | UserId 1 |ProjectApplication1| user 2 |ProjectApplication2| user b. Execute Application (Start) c. On Security dialog, application automatically get the userid of the user and see all the application it is registered using System.Security.Principal.WindowsIdentity.GetCurrent() eg: Prototype Welcome User! Please Choose Appliations you are registered on below: ProjectApplication1 <--this will be a dropdown ProjectApplication2 Password: [*********************] [Access Application Button] d. User selects the application with its password e. If the password is incorrect (application.exit()) else execute Selected Application eg: ProjectApplication1 is selected then execute ProjectApplication1 --> ProjectApplication1 --> ProjectApplication2 --> Many to come ++ if ProjectApplications has been closed then restart security Application. My questions on this use case: Is my use case possible? Can you give me any recommendations ? Currently we use setup and deployment to create installer in each Windows Forms application.

    Read the article

< Previous Page | 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430  | Next Page >