Search Results

Search found 4275 results on 171 pages for 'accept'.

Page 143/171 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• Get history of file changes from TFS

  - by Andreas Zita

  I'm trying to make some way of figuring out who to "blame" when an exception is thrown in our application (at work). It could be me causing it of course but I can accept that :). But to do this I need the history of a file in TFS so I can check who last made a change at the line of the exception. Its of course not always at the row of the exception that the erroneous change was inserted, so I would probably also need to check any changes to the same file and lastly any check-ins made very recently. I'm not sure how I will work out this but I would like to check with the community first if there is any already existing solutions for this? I have no experience with the TFS API yet so I have no way of telling whats possible and whats not. I guess I would integrate this into our app in the unhandled exceptions-handler. When some candidates of the exception is found I need to inform them by email. In the process it would be nice to log how many times a certain exception has been thrown by any user on our intranet, who, when, how etc. It could save us a lot of time (and money).

  Read the article

• [LaTeX] positions of page numbers, position of chapter headings, chapters AND Table of Contents, Ref

  - by kaikanmonaco

  I am writing my PhD thesis (120+ pages) in latex, the deadline is approaching and I am struggling with layout problems. I am using the documentstyle book. I am posting both problems in this one thread because I am not sure if the solution might be related to both problems or not. Problems are: 1.) The page numbers are mostly located on the top-right of each page (this is correct and where I want them to be). However, only on the first page of chapters and on the first page of what I call "special chapters", the page number is located bottom-centered. With "special chapters" I mean: List of Contents, List of Figures, List of Tables, References, Index. My university will not accept the thesis like this. The page number must ALWAYS be top-right one each page, even if the page is the first page of a chapter or the first page of something like the List of Contents. How can I fix this? 2.) On the first page of chapters and "special chapters" (List of Contents...), the chapter title is located far too low on the page. This is the standard layout of LaTeX with documentstyle book I think. However, the chapter title must start at the very top of the page! I.e. the same height as the normal text on the pages that follow. I mean the chapter title, not the header. I.e., if there is a chapter called "Chapter 1 Dynamics of foobar under mechanical stress" then that text has to start from the top the page, but right now it starts several centimeters below the top. How can I fix this? Have tried all kinds of things to no effect, I'd be very thankful for a solution! Thanks.

  Read the article

• Void* array casting to float, int32, int16, etc.

  - by Griffin

  Hey guys, I've got an array of PCM data, it could be 16 bit, 24 bit packed, 32 bit, etc.. It could be signed, or unsigned, and it could be 32 or 64 bit floating point. It is currently stored as a "void**" matrix, indexed by channel, then by frame. The goal is to allow my library to take in any PCM format and buffer it, without requiring manipulation of the data to fit a designated structure. If the A/D converter spits out 24 bit packed arrays of interleaved PCM, I need to accept it gracefully. I also need to support 16 bit non interleaved, as well as any permutation of the above formats. I know the bit depth and other information at runtime, and I'm trying to code efficiently while not duplicating code. What I need is an effective way to cast the matrix, put PCM data into the matrix, and then pull it out later. I can cast the matrix to int32_t, or int16_t for the 32 and 16 bit signed PCM respectively, I'll probably have to store the 24 bit PCM in an int32_t for 32 bit, 8 bit byte systems as well. Can anyone recommend a good way to put data into this array, and pull it out later? I'd like to avoid large sections of code which look like: switch( mFormat ) { case 1: // unsigned 8 bit for( int i = 0; i < mChannels; i++ ) framesArray = (uint8_t*)pcm[i]; break; case 2: // signed 8 bit for( int i = 0; i < mChannels; i++ ) framesArray = (int8_t*)pcm[i]; break; case 3: // unsigned 16 bit ... Limitations: I'm working in C/C++, no templates, no RTTI, no STL. Think embedded. Things get trickier when I have to port this to a DSP with 16 bit bytes. Does anybody have any useful macros they might be willing to share? Thanks, -Griff

  Read the article

• Can anyone help why my mockery doesn't work?

  - by user509550

  The test call real method(service) without mocking some expecations @Test public void testPropertyList() { Credentials creds = new Credentials(); creds.setUsername("someEmail"); creds.setPassword("somePassword"); creds.setReferrer("someReferrer"); final Collection<PropertyInfo> propertyInfoCollection = new LinkedList<PropertyInfo>(); final List<ListingInfo> listings = new ArrayList<ListingInfo>(); listings.add(listingInfoMock); listings.add(listingInfoMock); propertyInfoCollection.add(new PropertyInfo("c521bf5796274bd587c00bec80583c00", listings)); MultivaluedMap<String, String> params = new MultivaluedMapImpl(); params.add("page", "5"); params.add("size", "5"); instance.setPropertyListFacade(propertyListFacadeMock); mockery.checking(new Expectations() { { one(propertyListFacadeMock).getUserProperties(); will(returnValue(propertyInfoCollection)); one(listingInfoMock).getPropertyName(); allowing(listingInfoMock).getThumbnailURL(); one(listingInfoMock).getListingSystemId(); one(listingInfoMock).getPropertyURL(); one(listingInfoMock).getListingSystemId(); one(listingInfoMock).getPropertyURL(); } }); instance.setSessionManager(dashboardSessionManagerMock); testSuccessfulAuthenticate(); ClientResponse response = resource.path(PROPERTIES_PATH).queryParams(params).accept(MediaType.APPLICATION_XML) .get(ClientResponse.class); assertEquals(200, response.getStatus()); mockery.assertIsSatisfied(); }

  Read the article

• Datastructure choices for highspeed and memory efficient detection of duplicate of strings

  - by Jonathan Holland

  I have a interesting problem that could be solved in a number of ways: I have a function that takes in a string. If this function has never seen this string before, it needs to perform some processing. If the function has seen the string before, it needs to skip processing. After a specified amount of time, the function should accept duplicate strings. This function may be called thousands of time per second, and the string data may be very large. This is a highly abstracted explanation of the real application, just trying to get down to the core concept for the purpose of the question. The function will need to store state in order to detect duplicates. It also will need to store an associated timestamp in order to expire duplicates. It does NOT need to store the strings, a unique hash of the string would be fine, providing there is no false positives due to collisions (Use a perfect hash?), and the hash function was performant enough. The naive implementation would be simply (in C#): Dictionary<String,DateTime> though in the interest of lowering memory footprint and potentially increasing performance I'm evaluating a custom data structures to handle this instead of a basic hashtable. So, given these constraints, what would you use? EDIT, some additional information that might change proposed implementations: 99% of the strings will not be duplicates. Almost all of the duplicates will arrive back to back, or nearly sequentially. In the real world, the function will be called from multiple worker threads, so state management will need to be synchronized.

  Read the article

• Firefox not honoring must-revalidate cache headers returned by jQuery.ajax() request

  - by Oliver Weichhold

  UPDATE 1: Judging by this thread I am not the only one having this problem in FF 12 and only in 12. UPDATE 2: The problem does not seem to be limited to Ajax requests. From the looks of it everything that makes it into Firefox 12's cache will be fetched from there. No matter what. The server can specify cache control headers all day long. Bummer! What I'm trying to achieve is the following behavior: Browser may cache the response without revalidating for up to 5 minutes I don't care if the browser revalidates on every request (Both Chrome and IE9 do for example) When the expiration is up the browser MUST revalidate (which in my case will result in fresh data) Chrome and IE9 exhibit the desired behavior when issuing a jquery.ajax() request with ifModified: true and cache: true while Firefox 12 never revalidates, which poses a serious problem. These are the actual response headers: HTTP/1.1 200 OK Server: nginx Date: Sun, 03 Jun 2012 07:13:43 GMT Content-Type: text/javascript; charset=UTF-8 Transfer-Encoding: chunked Connection: keep-alive Vary: Accept-Encoding Cache-Control: private, must-revalidate, max-age=300 Last-Modified: Sun, 03 Jun 2012 07:07:13 GMT Content-Encoding: gzip Any suggestions?

  Read the article

• what is the best practice approach for n-tier application development with entity framework?

  - by samsur

  I am building an application using entity framework. I am using the T4 template to generate self tracking entities. Currently, I am thinking of creating the entity framework code in a separate project. In this same project, I would have partial classes with additional methods for the entities. I am thinking of creating a separate project for a service layer (WCF) with methods for the upper/presentation tier. The WCF layer will reference the entity framework project. The methods in the WCF layer will return the entities or accept the entities as the parameters. I am thinkg of creating a third project for the presentation layer (ASP.net), this will make calls to the WCF service but will also need to reference the entities as the WCF methods take these types as the parameters/return types. In short, i want to use the STE entities generated by the T4 template as a DTO to be used in all layers. I was originally thinking of creating a business logic layer that maps to each entities. Example: If i have a customer class, the Business Layer would have a CustomerBLL class and then methods in the customerBLL will be used by the service layer. I was also trying to create a DTO in this business layer. I however found that this approach is very time consuming and i do not see a major benefit as it would create more maintenance work. What is the best practice for n-tier application development using entity framework 4?

  Read the article

• programs hangs during socket interaction

  - by herrturtur

  I have two programs, sendfile.py and recvfile.py that are supposed to interact to send a file across the network. They communicate over TCP sockets. The communication is supposed to go something like this: sender =====filename=====> receiver sender <===== 'ok' ======= receiver or sender <===== 'no' ======= receiver if ok: sender ====== file ======> receiver I've got The sender and receiver code is here: Sender: import sys from jmm_sockets import * if len(sys.argv) != 4: print "Usage:", sys.argv[0], "<host> <port> <filename>" sys.exit(1) s = getClientSocket(sys.argv[1], int(sys.argv[2])) try: f = open(sys.argv[3]) except IOError, msg: print "couldn't open file" sys.exit(1) # send filename s.send(sys.argv[3]) # receive 'ok' buffer = None response = str() while 1: buffer = s.recv(1) if buffer == '': break else: response = response + buffer if response == 'ok': print 'receiver acknowledged receipt of filename' # send file s.send(f.read()) elif response == 'no': print "receiver doesn't want the file" # cleanup f.close() s.close() Receiver: from jmm_sockets import * s = getServerSocket(None, 16001) conn, addr = s.accept() buffer = None filename = str() # receive filename while 1: buffer = conn.recv(1) if buffer == '': break else: filename = filename + buffer print "sender wants to send", filename, "is that ok?" user_choice = raw_input("ok/no: ") if user_choice == 'ok': # send ok conn.send('ok') #receive file data = str() while 1: buffer = conn.recv(1) if buffer=='': break else: data = data + buffer print data else: conn.send('no') conn.close() I'm sure I'm missing something here in the sorts of a deadlock, but don't know what it is.

  Read the article

• .NET port with Java's Map, Set, HashMap

  - by Nikos Baxevanis

  I am porting Java code in .NET and I am stuck in the following lines that (behave unexpectedly in .NET). Java: Map<Set<State>, Set<State>> sets = new HashMap<Set<State>, Set<State>>(); Set<State> p = new HashSet<State>(); if (!sets.containsKey(p)) { ... } The equivalent .NET code could possibly be: IDictionary<HashSet<State>, HashSet<State>> sets = new Dictionary<HashSet<State>, HashSet<State>>(); HashSet<State> p = new HashSet<State>(); if (!sets.containsKey(p)) { /* (Add to a list). Always get here in .NET (??) */ } However the code comparison fails, the program think that "sets" never contain Key "p" and eventually results in OutOfMemoryException. Perhaps I am missing something, object equality and identity might be different between Java and .NET. I tried implementing IComparable and IEquatable in class State but the results were the same. Edit: What the code does is: If the sets does not contain key "p" (which is a HashSet) it is going to add "p" at the end of a LinkedList. The State class (Java) is a simple class defined as: public class State implements Comparable<State> { boolean accept; Set<Transition> transitions; int number; int id; static int next_id; public State() { resetTransitions(); id = next_id++; } // ... public int compareTo(State s) { return s.id - id; } public boolean equals(Object obj) { return super.equals(obj); } public int hashCode() { return super.hashCode(); }

  Read the article

• how close a connection from server side that created by ajax from client side

  - by saeid

  I have this sample php code: <?php function response($a) { @ob_end_clean(); header("Connection: close"); ob_start(); echo $a; $length = ob_get_length(); header("Content-Length: $length"); ob_end_flush(); flush(); } response("test1"); sleep(5); echo "test2"; ?> now I make a connection to server from client by ajax. now I want to server only send "test1" to me and then close the connection. but connection not closed and wait 5 seconds and send me "test1 test2" !! this is response headers from server to me : X-Powered-By: PHP/5.3.27 Connection: close Vary: Accept-Encoding,User-Agent Content-Encoding: gzip Cache-Control: private, no-cache, no-store, ------revalidate, no-transform Transfer-Encoding: chunked Content-Type: text/html in response headers I do not see Content-Length header. is problem for this ?? or if not what I must do now for solving problem ??

  Read the article

• Why my http POST request doesn't go well?

  - by 0x90

  I am trying to make this POST request in ruby. but get back #<Net::HTTPUnsupportedMediaType:0x007f94d396bb98> what I tried is: require 'rubygems' require 'net/http' require 'uri' require 'json' auto_index_nodes =URI('http://localhost:7474/db/data/index/node/') request_nodes = Net::HTTP::Post.new(auto_index_nodes.request_uri) http = Net::HTTP.new(auto_index_nodes.host, auto_index_nodes.port) request_nodes.add_field("Accept", "application/json") request_nodes.set_form_data({"name"=>"node_auto_index", "config" => { "type" => "fulltext", "provider" =>"lucene"} , "Content-Type" => "application/json" }) response = http.request(request_nodes) Tried to write this part: "config" => { "type" => "fulltext", provider" =>"lucene"} , "Content-Type" => "application/json" } like that: "config" => '{ "type" => "fulltext",\ "provider" =>"lucene"},\ "Content-Type" => "application/json"\ }' this try didn't help either: request_nodes.set_form_data({"name"=>"node_auto_index", "config" => '{ \ "type" : "fulltext",\ "provider" : "lucene"}' , "Content-Type" => "application/json" })

  Read the article

• C++ MFC server app with sockets crashes and I cannot find the fault, help!

  - by usermeister

  My program has one dialog and two sockets. Both sockets are derived from CAsyncSocket, one is for listening, other is for receiving data from client. My program crashes when client tries to connect to server application and server needs to initialize receiving socket. This is my MFC dialog class. class CFileTransferServerDlg : public CDialog { ... ListeningSocket ListenSock; ReceivingSocket* RecvSock; void OnAccept(); // called when ListenSock gets connection attempt ... }; This is my derived socket class for receiving data that calls parent dialogs method when event is signaled. class ReceivingSocket : public CAsyncSocket { CFileTransferServerDlg* m_pDlg; // for accessing parent dialogs controls virtual void OnReceive(int nErrorCode); } ReceivingSocket::ReceivingSocket() { } This is dialogs function that handles incoming connection attempt when listening socket gets event notification. This is where the crash happens. void CFileTransferServerDlg::OnAccept() { RecvSock = new ReceivingSocket; /* CRASH */ } OR void CFileTransferServerDlg::OnAccept() { ReceivingSocket* tmpSock = new ReceivingSocket; tmpSock->SetParentDlg(this); CString message; if( ListenSock.Accept(*tmpSock) ) /* CRASH */ { message.LoadStringW(IDS_CLIENT_CONNECTED); m_txtStatus.SetWindowTextW(message); RecvSock = tmpSock; } } My program crashes when I try to create a socket for receiving file sent from client application. OnAccept starts when Listening socket signals incoming connection attempt, but my application then crashes. I've tried running it on another computer and connection attempt was succesful. What could be wrong? Error in debug mode: Unhandled exception at 0x009c30e1 in FileTransferServer.exe: 0xC0000005: Access violation reading location 0xccccce58.

  Read the article

• How string accepting interface should look like?

  - by ybungalobill

  Hello, This is a follow up of this question. Suppose I write a C++ interface that accepts or returns a const string. I can use a const char* zero-terminated string: void f(const char* str); // (1) The other way would be to use an std::string: void f(const string& str); // (2) It's also possible to write an overload and accept both: void f(const char* str); // (3) void f(const string& str); Or even a template in conjunction with boost string algorithms: template<class Range> void f(const Range& str); // (4) My thoughts are: (1) is not C++ish and may be less efficient when subsequent operations may need to know the string length. (2) is bad because now f("long very long C string"); invokes a construction of std::string which involves a heap allocation. If f uses that string just to pass it to some low-level interface that expects a C-string (like fopen) then it is just a waste of resources. (3) causes code duplication. Although one f can call the other depending on what is the most efficient implementation. However we can't overload based on return type, like in case of std::exception::what() that returns a const char*. (4) doesn't work with separate compilation and may cause even larger code bloat. Choosing between (1) and (2) based on what's needed by the implementation is, well, leaking an implementation detail to the interface. The question is: what is the preffered way? Is there any single guideline I can follow? What's your experience?

  Read the article

• Booking logic and architecture, database sync: Hotels, tennis courts reservation system ...

  - by coulix

  Hello Stackers, Imagine that you want to design a tennis booking system. You have 5 tennis clubs as partenrs with no online api allowing you to check on their side if a court is booked or not: You have to build this part as well. Every time a booking is done on their side you want it to be know by our system. Probably using a POST request form tennis partner to our server. Every time a booking is done on our website, we want to push the booking to their system. The difficulty is that their system need to be online and accessible from outside. Ip may change, we have to use a dns updater. In case their system is not available we still accept the booking and fallback to an async email with 'i confirm booking/reject booking' link sent to the club. I find the whole process quite complex and was wondering about the way online hotel booking system and hotel were working. Do they all have their data open and online ? The good thing is that the data will grow large and fits nicely to some no SQL ;) like couch db

  Read the article

• What kind of data do I pass into a Django Model.save() method?

  - by poswald

  Lets say that we are getting POSTed a form like this in Django: rate=10 items= [23,12,31,52,83,34] The items are primary keys of an Item model. I have a bunch of business logic that will run and create more items based on this data, the results of some db lookups, and some business logic. I want to put that logic into a save signal or an overridden Model.save() method of another model (let's call it Inventory). The business logic will run when I create a new Inventory object using this form data. Inventory will look like this: class Inventory(models.Model): picked_items = models.ManyToManyField(Item, related_name="items_picked_set") calculated_items = models.ManyToManyField(Item, related_name="items_calculated_set") rate = models.DecimalField() ... other fields here ... New calculated_items will be created based on the passed in items which will be stored as picked_items. My question is this: is it better for the save() method on this model to accept: the request object (I don't really like this coupling) the form data as arguments or kwargs (a list of primary keys and the other form fields) a list of Items (The caller form or view will lookup the list of Items and create a list as well as pass in the other form fields) some other approach? I know this is a bit subjective, but I was wondering what the general idea is. I've looked through a lot of code but I'm having a hard time finding a pattern I like.

  Read the article

• jQuery broken function after added new function

  - by Kyle Sevenoaks

  What's wrong here? The alert function was working until I added this new function to it. Is there anything I am doing wrong? It just simply doesn't fire the alert anymore. <input value="1" type="checkbox" name="salgsvilkar" id="checkbox2" style="float:left;" /> {literal} <script src="http://code.jquery.com/jquery-latest.js"></script> <script type="text/javascript"> $(function() { //checkbox $("#scrollwrap").click(function(){ $("#scrollwrap").toggleClass('highlight'); });? }); $(function(){ //button $("#fullfor_btn").click(function(e){ if(!$("#checkbox2").is(':checked') == false) { alert("Please accept the terms of sale."); e.preventDefault(); } }); }); </script> {/literal} <button type="submit" class="submit" name="{$method}" id="fullfor_btn" title="Fullfør bestillingen nå" value="">&nbsp;</button>

  Read the article

• SQL developer here -- Nesting with select * finicky in Oracle 10g?

  - by John Sullivan

  I am writing a simple diagnostic query I will execute in my Oracle 10g scratchpad. I am trying to do this as part of a step to build the query. In the SQL Scratchpad for Oracle 10g Enterprise Manager Console, this statement runs fine. SELECT * FROM v$session sess, v$sql sql WHERE sql.sql_id(+) = sess.sql_id and sql.sql_text <> ' ' If I try to wrap that up in Select * from () tb2 I get an error, "ORA-00918: Column Ambiguously Defined". I didn't think that could ever happen with this kind of statement so I am a bit confused. select * from (SELECT * FROM v$session sess, v$sql sql WHERE sql.sql_id(+) = sess.sql_id and sql.sql_text <> ' ') tb2 You should always be able to select * from the result set of another select * statement using this structure as far as I'm aware... right? Is Oracle/10g/the scratchpad trying to force me to accept a certain syntactic structure to prevent excessive nesting? Is this a bug in scratchpad or something about how oracle works?

  Read the article

• how to show all added items into another activity, like: AddtoCart and ViewCart Functionality

  - by Stanley

  i am trying to make a shopping cart app, allowing user to choose category then select item to purchase, once user will click on any item to purchase, then showing that selected item into another activity with item image, name, cost, qty (to accept by user) and also providing add to cart functionality, now i want whenever user will click on Add to Cart button, then selected item need to show in ViewCart Activity, so here i am placing my AddtoCart Activity code, please tell me what i need to write to show added item(s) into ViewCart Category just like in shopping cart, In ViewCart activity i just want to show item title, cost and qty (entered by user):- public class AddtoCart extends Activity{ static final String KEY_TITLE = "title"; static final String KEY_COST = "cost"; static final String KEY_THUMB_URL = "imageUri"; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.single); Intent in = getIntent(); String title = in.getStringExtra(KEY_TITLE); String thumb_url = in.getStringExtra(KEY_THUMB_URL); String cost = in.getStringExtra(KEY_COST); ImageLoader imageLoader = new ImageLoader(getApplicationContext()); ImageView imgv = (ImageView) findViewById(R.id.single_thumb); TextView txttitle = (TextView) findViewById(R.id.single_title); TextView txtcost = (TextView) findViewById(R.id.single_cost); txttitle.setText(title); txtcost.setText(cost); imageLoader.DisplayImage(thumb_url, imgv); // Save a reference to the quantity edit text final EditText editTextQuantity = (EditText) findViewById(R.id.edit_qty); ImageButton addToCartButton = (ImageButton) findViewById(R.id.img_add); addToCartButton.setOnClickListener(new OnClickListener() { public void onClick(View v) { // Check to see that a valid quantity was entered int quantity = 0; try { quantity = Integer.parseInt(editTextQuantity.getText() .toString()); if (quantity <= 0) { Toast.makeText(getBaseContext(), "Please enter a quantity of 1 or higher", Toast.LENGTH_SHORT).show(); return; } } catch (Exception e) { Toast.makeText(getBaseContext(), "Please enter a numeric quantity", Toast.LENGTH_SHORT).show(); return; } // Close the activity finish(); } }); }}

  Read the article

• Generics in a bidirectional association

  - by Verhoevenv

  Let's say I have two classes A and B, with B a subtype of A. This is only part of a richer type hierarchy, obviously, but I don't think that's relevant. Assume A is the root of the hierarchy. There is a collection class C that keeps track of a list of A's. However, I want to make C generic, so that it is possible to make an instance that only keeps B's and won't accept A's. class A(val c: C[A]) { c.addEntry(this) } class B(c: C[A]) extends A(c) class C[T <: A]{ val entries = new ArrayBuffer[T]() def addEntry(e: T) { entries += e } } object Generic { def main(args : Array[String]) { val c = new C[B]() new B(c) } } The code above obviously give the error 'type mismatch: found C[B], required C[A]' on the new B(c) line. I'm not sure how this can be fixed. It's not possible to make C covariant in T (like C[+T <: A]) because the ArrayBuffer is non-variantly typed in T. It's not possible to make the constructor of B require a C[B] because C can't be covariant. Am I barking up the wrong tree here? I'm a complete Scala newbie, so any ideas and tips might be helpful. Thank you! EDIT: Basically, what I'd like to have is that the compiler accepts both val c = new C[B]() new B(c) and val c = new C[A]() new B(c) but would reject val c = new C[B]() new A(c) It's probably possible to relax the typing of the ArrayBuffer in C to be A instead of T, and thus in the addEntry method as well, if that helps.

  Read the article

• Why is a non-blocking TCP connect() occasionally so slow on Linux?

  - by pts

  I was trying to measure the speed of a TCP server I'm writing, and I've noticed that there might be a fundamental problem of measuring the speed of the connect() calls: if I connect in a non-blocking way, connect() operations become very slow after a few seconds. Here is the example code in Python: #! /usr/bin/python2.4 import errno import os import select import socket import sys def NonBlockingConnect(sock, addr): while True: try: return sock.connect(addr) except socket.error, e: if e.args[0] not in (errno.EINPROGRESS, errno.EALREADY): raise os.write(2, '^') if not select.select((), (sock,), (), 0.5)[1]: os.write(2, 'P') def InfiniteClient(addr): while True: sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM, 0) sock.setblocking(0) sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) # sock.connect(addr) NonBlockingConnect(sock, addr) sock.close() os.write(2, '.') def InfiniteServer(server_socket): while True: sock, addr = server_socket.accept() sock.close() server_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM, 0) server_socket.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) server_socket.bind(('127.0.0.1', 45454)) server_socket.listen(128) if os.fork(): # Parent. InfiniteServer(server_socket) else: addr = server_socket.getsockname() server_socket.close() InfiniteClient(addr) With NonBlockingConnect, most connect() operations are fast, but in every few seconds there happens to be one connect() operation which takes at least 2 seconds (as indicated by 5 consecutive P letters on the output). By using sock.connect instead of NonBlockingConnect all connect operations seem to be fast. How is it possible to get rid of these slow connect()s? I'm running Ubuntu Karmic desktop with the standard PAE kernel: Linux narancs 2.6.31-20-generic-pae #57-Ubuntu SMP Mon Feb 8 10:23:59 UTC 2010 i686 GNU/Linux

  Read the article

• Value missing from form.fieldnames in ColdFusion

  - by Patrick McElhaney

  I must be losing my mind. <cfif cgi.request_method eq "POST"> <cfoutput> Form.fieldnames = #form.fieldnames#<br> structKeyList(form) = #structKeyList(form)# </cfoutput> </cfif> <form method="post" accept-charset="utf-8"> <input type="text" name="graduation_date" value="x"><br> <input type="text" name="foo" value="y"><br> <input type="text" name="bar" value="z"><br> <input type="submit" value="Submit Form" > </form> The form.fieldnames variable should include a list of submitted fields: foo, bar, and graduation_date. But graduation_date is missing. After a little more testing, I see that anything ending in _date is excluded from form.fieldnames. I was going to ask what's wrong with my code, but now I'm pretty convinced it's a bug in ColdFusion. (I'm on ColdFusion 8.0.1 / OS X 10.5.6.) It's a bug in ColdFusion, right?

  Read the article

• Complicated .NET factory design

  - by Tom W

  Hello SO; I'm planning to ask a fairly elaborate question that is also something of a musing here, so bear with me... I'm trying to design a factory implementation for a simulation application. The simulation will consist of different sorts of entities i.e. it is not a homogenous simulation in any respect. As a result, there will be numerous very different concrete implementations and only the very general properties will be abstracted at the top level. What I'd like to be able to do is create new simulation entities by calling a method on the model with a series of named arguments representing the parameters of the entity, and have the model infer what type of object is being described by the inbound parameters (from the names of the parameters and potentially the sequence they occur in) and call a factory method on the appropriate derived class. For example, if I pass the model a pair of parameters (Param1=5000, Param2="Bacon") I would like it to infer that the names Param1 and Param2 'belong' to the class "Blob1" and call a shared function "getBlob1" with named parameters Param1:=5000, Param2:="Bacon" whereas if I pass the model (Param1=5000, Param3=50) it would call a similar factory method for Blob2; because Param1 and Param3 in that order 'belong' to Blob2. I foresee several issues to resolve: Whether or not I can reflect on the available types with string parameter names and how to do this if it's possible Whether or not there's a neat way of doing the appropriate constructor inference from the combinatoric properties of the argument list or whether I'm going to have to bodge something to do it 'by hand'. If possible I'd like the model class to be able to accept parameters as parameters rather than as some collection of keys and values, which would require the model to expose a large number of parametrised methods at runtime without me having to code them explicitly - presumably one for every factory method available in the relevant namespace. What I'm really asking is how you'd go about implementing such a system, rather than whether or not it's fundamentally possible. I don't have the foresight or experience with .NET reflection to be able to figure out a way by myself. Hopefully this will prove an informative discussion.

  Read the article

• Threading in Android

  - by virsir

  I am currently developing Android app, it needs download content from internet. I use thread to do that and then call runOnUiThread method to update GUI. I placed a refresh menu on it, if user tried to refresh the content, the download thread will be created and started. The problem is that how can I control the thread order, I need to accept the latest request's response and abandon previous thread requests if there were some other requests still running because the request parameters may have been changed by user. Currently I was using a threadId to do this thing, when a thread finished, it will check its threadId, if it was the latest recored one, it then takes control and render the response. My question is that is there any other proper better solution for this? Do I need to stop threads when user exit the app? I remember that some book said that do not try stop thread manually and wait itself finish is a good practice, is that true? Should I stop them by calling "stop" or "interrupt" method? I read some documents around threading in Android and found the class HandlerThread, what is it? In what kind of situation I need to use it?

  Read the article

• Change URL Submitted to Depending on Form Selection

  - by Chris

  I have a form which I need to submit to one of three different URLs depending on a selection made in the form. I suspect the easiest solution is to use jQuery to insert the appropriate path before the rest of the form parameters as the selection is made, but not sure on what the code would be. Any pointers greratly appreciated! <form id="myForm" action='/booking/default-path' accept-charset='utf-8' method='get'> <select name="paramA" id="paramA"> <option id="optionA" value="A" selected="selected">Option A</option> <option id="optionB" value="B">Option B</option> </select> <select name="currency" id="currency"> <option id="GBP" value="GBP" selected="selected">British Pounds</option> <option id="EUR" value="EUR">Euros</option> <option id="USD" value="USD">US Dollars</option> </select> <input type="submit" value="submit" id="submit" name="submit" /> </form> Where the three different URLs would be: ../booking/default-path-gbp?...[params here]... ../booking/default-path-eur?...[params here]... ../booking/default-path-usd?...[params here]... I know it would be a lot easier to incorporate the parameter in the usual way and just use one submission URL root, but unfortunately I'm submitting to an eComms system out of my control and am stuck with having to find a solution to this. Should be easy I think, but not sure where to start, jQuery used elsewhere, so would prefer to use this framework in any solutions.

  Read the article

• How to delete ProgIDs from other user accounts when uninstalling from Windows?

  - by Mordachai

  I've been investigating "how should a modern windows c++ application register its file types" with Windows (see http://stackoverflow.com/questions/2828637/c-how-do-i-correctly-register-and-unregister-file-type-associations-for-our-ap). And having combed through the various MSDN articles on the subject, the summary appears to be as follows: The installer (elevated) should register the global ProgID HKLM\Software\Classes\my-app.my-doc[.version] (e.g. HKLM\Software\Classes\TextPad.text) The installer also configures default associations for its document types (e.g. .myext) and points this to the aforementioned global ProgID in HKLM. NOTE: a user interface should be provided here to allow the user to either accept all default associations, or to customize which associations should be set. The application, running standard (unelevated), should provide a UI for allowing the current user to set their personal associations as is available in the installer, except that these associations are stored in HKCU\Software\Classes (per user, not per machine). The UN-installer is then responsible for deleting all registered ProgIDs (but should leave the actual file associations alone, as Windows is smart enough to handle associations pointing to missing ProgIDs, and this is the specified desired behavior by MSDN). So that schema sounds reasonable to me, except when I consider #4: How does an uninstaller, running elevated for a given user account, delete any per-user ProgIDs created in step #3 for other users? As I understand things, even in elevated mode, an uninstaller cannot go into another user's registry hive and delete items? Or can it? Does it have to load each given user hive first? What are the rules here? Thanks for any insight you might have to offer! EDIT: See below for the solution (My question was founded in confusion)

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >