Search Results

Search found 3730 results on 150 pages for 'bash'.

Page 143/150 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• Cutting Ubuntu to the bone for Virtualbox VM

  - by Monty

  I've been looking around for a Linux variant which will install only the software I need rather than everything Ubuntu (for example) puts in by default. This is to create a virtual machine in Virtualbox which has bash, apache, python, perl, SQLite, openssh and a few other programs but nothing else. I'd prefer to go with Ubuntu if possible but another modern distro would do as well (I like using apt-get and yum rather than downloading/compiling etc). So far, I've tried: SuseStudio.com, which is probably the best so far. Pressing F4 to get the boot options on Ubuntu 9.10, but there is no minimal installation (I think there was once). Arch Linux, slightly confusing install procedure but I might go back and try again. Gentoo, started well but fairly soon the HD on the virtual machine went to 2Gb, even before the installation had started in earnest (I'd partitioned the disks is all). I realise there are various "small" Linuxes around like Puppy, Feather, DSL, etc, but they seem to be aimed at desktop users or as a techie's toolkit, and I want a small-as-possible server distro which can be managed with tools like apt or yum or similar. TIA for any advice you can offer! -- Monty

  Read the article

• homebrew path issue

  - by Shaun Stanislaus

  Master:~ shaunstanislaus$ ruby <(curl -fsSkL raw.github.com/mxcl/homebrew/go) ==> This script will install: /usr/local/bin/brew /usr/local/Library/... /usr/local/share/man/man1/brew.1 Press enter to continue ==> Downloading and Installing Homebrew... remote: Counting objects: 82368, done. remote: Compressing objects: 100% (39323/39323), done. remote: Total 82368 (delta 56782), reused 65301 (delta 42220) Receiving objects: 100% (82368/82368), 11.68 MiB | 1.59 MiB/s, done. Resolving deltas: 100% (56782/56782), done. From https://github.com/mxcl/homebrew * [new branch] master -> origin/master HEAD is now at 2ea1a0e smpeg: depends on gtk ==> Installation successful! You should run `brew doctor' *before* you install anything. Now type: brew help Master:~ shaunstanislaus$ brew doctor -bash: /usr/local/bin/brew: /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby: bad interpreter: No such file or directory Master:~ shaunstanislaus$ echo $PATH /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/opt/X11/bin:/Users/shaunstanislaus/Library/Application Support/GoodSync:/opt/local/bin:/opt/local/sbin:/usr/local/sbin:/Users/shaunstanislaus/.ec2/bin:/Users/shaunstanislaus/.rvm/bin /usr/local/bin/brew: /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby: bad interpreter: No such file or directory how do i fix this path issue? i can't use brew command and i think i previously symlink to wrong location. please advice, thank you.

  Read the article

• Rails 3.0 console won't run

  - by Waheedi

  bash-3.2# rails console /opt/local/lib/ruby1.9/1.9.1/irb/completion.rb:9:in `require': dlopen(/opt/local/lib/ruby1.9/1.9.1/i386-darwin10/readline.bundle, 9): Library not loaded: /opt/local/lib/libncurses.5.dylib (LoadError) Referenced from: /opt/local/lib/ruby1.9/1.9.1/i386-darwin10/readline.bundle Reason: no suitable image found. Did find: /opt/local/lib/libncurses.5.dylib: no matching architecture in universal wrapper /usr/lib/libncurses.5.dylib: no matching architecture in universal wrapper - /opt/local/lib/ruby1.9/1.9.1/i386-darwin10/readline.bundle from /opt/local/lib/ruby1.9/1.9.1/irb/completion.rb:9:in `<top (required)>' from /opt/local/lib/ruby1.9/gems/1.9.1/gems/railties-3.0.0.beta3/lib/rails/commands/console.rb:3:in `require' from /opt/local/lib/ruby1.9/gems/1.9.1/gems/railties-3.0.0.beta3/lib/rails/commands/console.rb:3:in `<top (required)>' from /opt/local/lib/ruby1.9/gems/1.9.1/gems/railties-3.0.0.beta3/lib/rails/commands.rb:32:in `require' from /opt/local/lib/ruby1.9/gems/1.9.1/gems/railties-3.0.0.beta3/lib/rails/commands.rb:32:in `<top (required)>' from script/rails:9:in `require' from script/rails:9:in `<main>' while "rails server" works pretty well any help would be appreciated.

  Read the article

• GIT clone repo across local file system

  - by Jon

  Hi all, I am a complete Noob when it comes to GIT. I have been just taking my first steps over the last few days. I setup a repo on my laptop, pulled down the Trunk from an SVN project (had some issues with branches, not got them working), but all seems ok there. I now want to be able to pull or push from the laptop to my main desktop. The reason being the laptop is handy on the train as I spend 2 hours a day travelling and can get some good work done. But my main machine at home is great for development. So I want to be able to push / pull from the laptop to the main computer when I get home. I thought the most simple way of doing this would be to just have the code folder shared out across the LAN and do: git clone file://192.168.10.51/code unfortunately this doesn't seem to be working for me: so I open a git bash cmd and type the above command, I am in C:\code (the shared folder for both machines) this is what I get back: Initialized empty Git repository in C:/code/code/.git/ fatal: 'C:/Program Files (x86)/Git/code' does not appear to be a git repository fatal: The remote end hung up unexpectedly How can I share the repository between the two machines in the most simple of ways. There will be other locations that will be official storage points and places where the other devs and CI server etc will pull from, this is just so that I can work on the same repo across two machines. Thanks

  Read the article

• How do I launch background jobs w/ paramiko?

  - by sophacles

  Here is my scenario: I am trying to automate some tasks using Paramiko. The tasks need to be started in this order (using the notation (host, task)): (A, 1), (B, 2), (C, 2), (A,3), (B,3) -- essentially starting servers and clients for some testing in the correct order. Further, because in the tests networking may get mucked up, and because I need some of the output from the tests, I would like to just redirect output to a file. In similar scenarios the common response is to use 'screen -m -d' or to use 'nohup'. However with paramiko's exec_cmd, nohup doesn't actually exit. Using: bash -c -l nohup test_cmd & doesnt work either, exec_cmd still blocks to process end. In the screen case, output redirection doesn't work very well, (actually, doesnt work at all the best I can figure out). So, after all that explanation, my question is: is there an easy elegant way to detach processes and capture output in such a way as to end paramiko's exec_cmd blocking? Update The dtach command works nicely for this!

  Read the article

• general learning methodology

  - by momo

  just wanted to hear on the different general learning paths people embark on when learning a new language/framework. the one i currently use, which is how i learned bash and am currently learning python, is: instant hacking tutorial (very short tutorial introducing the basic syntax, variable declaration, loops, data types, etc. and how they are generally used) in depth tutorial with good programming style and slightly topic-specific (e.g. Mark Pilgrim's Dive into Python), important topics for me personally are regex methods, file IO, and ways the different data types are utilized best (i wrote a very primitive bayesian spam filter using python's dictionaries to keep track of word occurrences) spaced-repition of syntax or short recipes (i use anki, with questions like 'create dictionary with filename and filesize metadata, human-readable' or simpler ones like 'match 0 - 3 occurences of the letter M in a string', or 'return/create an iterator from two sequences') the use of spaced-repitition has been invaluable, and i credit it with the ease that i can recall/create python algorithms. however, i've recently started looking into django, and i've found that spaced-repitition, at least in my case, doesn't work very well for learning a framework, it works best with short code recipes (either that or i should start looking into more basic django framework tutorials). the problem i'm encountering is that since framework programming is not only algorithms, but actually learning the API, which can be quite complex since you have to learn all the methods, modules, the places where they are stored, and the sequence of which things have to be done. for ex. in django to start a project that deals with polls (from the django tutorial), one has to create the project, edit the settings.py file, create the polls app, edit the models.py file (which requires knowing the classes that are present in the module models), edit the urls.py file, etc. i found that my spaced-repition method didn't work very well for this type of learning, so i wanted to ask you guys what method(s) you use for learning the different frameworks/APIs.

  Read the article

• need help about process........

  - by adeel amin

  when i start process like process= Runtime.getRuntime().exec("gnome-terminal");, it start shell execution, i want to stop shell execution and want to redirect I/O from process, can anybody tell how i can do this? my code is: public void start_process() { try { process= Runtime.getRuntime().exec("bash"); pw= new PrintWriter(process.getOutputStream(),true); br=new BufferedReader(new InputStreamReader(process.getInputStream())); err=new BufferedReader(new InputStreamReader(process.getErrorStream())); } catch (Exception ioe) { System.out.println("IO Exception-> " + ioe); } } public void execution_command() { if(check==2) { try { boolean flag=thread.isAlive(); if(flag==true) thread.stop(); Thread.sleep(30); thread = new MyReader(br,tbOutput,err,check); thread.start(); }catch(Exception ex){ JOptionPane.showMessageDialog(null, ex.getMessage()+"1"); } } else { try { Thread.sleep(30); thread = new MyReader(br,tbOutput,err,check); thread.start(); check=2; }catch(Exception ex){ JOptionPane.showMessageDialog(null, ex.getMessage()+"1"); } } } private void jButton3ActionPerformed(java.awt.event.ActionEvent evt) { // TODO add your handling code here: command=tfCmd.getText().toString().trim(); pw.println(command); execution_command(); } when i enter some command in textfield and press execute button, nothing displayed on my output textarea, how i can stop shellexecution and can redirect Input and output?

  Read the article

• Distributing a bundle of files across an extranet

  - by John Zwinck

  I want to be able to distribute bundles of files, about 500 MB per bundle, to all machines on a corporate "extranet" (which is basically a few LANs connected using various private mechanisms, including leased lines and VPN). The total number of hosts is roughly 100, and the goal is to get a copy of the bundle from one host onto all the other hosts reliably, quickly, and efficiently. One important issue is that some hosts are grouped together on single fast LANs in which case the network I/O should be done once from one group to the next and then within each group between all the peers. This is as opposed to a strict central server system where multiple hosts might each fetch the same bundle over a slow link, rather than once via the slow link and then between each other quickly. A new bundle will be produced every few days, and occasionally old bundles will be deleted (but that problem can be solved separately). The machines in question happen to run recent Linuxes, but bonus points will go to solutions which are at least somewhat cross-platform (in which case the bundle might differ per platform but maybe the same mechanism can be used). That's pretty much it. I'm not opposed to writing some code to handle this, but it would be preferable if it were one of bash, Python, Ruby, Lua, C, or C++.

  Read the article

• Java Process.waitFor() and IO streams

  - by lynks

  I have the following code; String[] cmd = { "bash", "-c", "~/path/to/script.sh" }; Process p = Runtime.getRuntime().exec(cmd); PipeThread a = new PipeThread(p.getInputStream(), System.out); PipeThread b = new PipeThread(p.getErrorStream(), System.err); p.waitFor(); a.die(); b.die(); The PipeThread class is quite simple so I will include it in full; public class PipeThread implements Runnable { private BufferedInputStream in; private BufferedOutputStream out; public Thread thread; private boolean die = false; public PipeThread(InputStream i, OutputStream o) { in = new BufferedInputStream(i); out = new BufferedOutputStream(o); thread = new Thread(this); thread.start(); } public void die() { die = true; } public void run() { try { byte[] b = new byte[1024]; while(!die) { int x = in.read(b, 0, 1024); if(x > 0) out.write(b, 0, x); else die(); out.flush(); } } catch(Exception e) { e.printStackTrace(); } try { in.close(); out.close(); } catch(Exception e) { } } } My problem is this; p.waitFor() blocks endlessly, even after the subprocess has terminated. If I do not create the pair of PipeThread instances, then p.waitFor() works perfectly. What is it about the piping of io streams that is causing p.waitFor() to continue blocking? I'm confused as I thought the IO streams would be passive, unable to keep a process alive, or to make Java think the process is still alive.

  Read the article

• Analyze log files from many languages using a single tool. And recommendations of logging frameworks

  - by Binary255

  We have a system build on lots of languages. The ones we are interested in logging, in order of priority, are: C/C++ PHP C# Bash Java Wish list: If it is possible, we would like logging to be achieved from the above languages in such a way that we may use a single log viewing tool for all of them. Ideally they would be in the same format, but next to that in as few formats as possible and readable from as many log file viewers as possible. If it is possible logging to a single log file or a set of log files would be nice. With a possibility to filter based on the source language that is being logged. We would like to copy the log files (or should be log to a database and copy it instead?) from multiple servers to a single location. So that we can analyze the log files from many servers at the same time (to see if any of our servers execute a certain piece legacy code for example). Being able to change logging level at runtime would be nice. Thank you for reading! It's quite a complex problem, I hope someone has wrestled with it before and has some valuable information!

  Read the article

• jQuery code in ajax loaded content only runs once

  - by Michael Howland

  I have been looking around SO for a while and haven't been able to find anything that matches my issue, which I'm not even sure I can explain that well, so take that for what it's worth. I have a page that loads content into a div via AJAX (using the .load() method). There are several links in the navigation, meaning the content will change while navigating the site without refreshing the entire page. (Actually, to be honest, I just cribbed the DocTemplate layout [http://css-tricks.com/examples/DocTemplate/] from css-tricks.com. Apparently while I'm not a re-invent the wheel type programmer, I am a bash my head against the wheel incessantly to get it to work programmer.) So, index.php loads up some DB content in a div. There is also a jQuery UI modal input form on index.php. Essentially, the only HTML on the page is an empty div and a form. This all works fine, until I call up another page, then go back to index.php. The DB content is not loaded, and my form is shown there in all its naked glory. I know why this is happening. The page was not refreshed, nothing kicked off the code to load the content and hide the form. My question is, how can I ensure that the AJAX .load() and the .dialog() will run when loading index.php again? Is it even possible? Thanks, and my apologies for the length. I get verbose when I'm confused.

  Read the article

• How to view shell commands used by eclipse "run configurations"

  - by gmale

  Given a "run configuration" in Eclipse, I want to print out the associated shell command that would be used to run it. For example: Right now, in Eclipse, if I click "play" it will run: mvn assembly:directory -Dmaven.test.skip=true I don't see that command, I just know that's what the IDE must run, at some point. However, some of the other run configurations are far more complex with long classpaths and virtual machine options and, frankly, sometimes I have no idea what the equivalent shell command would be (particularly when it comes to Flex). There must be some way to access the shell command that would be associated with a "Run Configuration" in Eclipse/Flex Builder. This information must be available, which leads me to believe someone has written a plugin to display it. Or maybe there's already an option built into Eclipse for accessing this. So is there a way to, essentially, convert an Eclipse run configuration into a shell command? (for context only: I'm asking because I'm writing a bash script that automates everything I do, during development--from populating the Database all the way to opening Firefox and clearing the cache before running the web app. So every command I run from the IDE needs to exist in the script. Some are tricky to figure out.)

  Read the article

• Installing Rails on Mountain Lion

  - by Jordan Medlock

  I was wondering if you could help me find why I cannot install Ruby on Rails on my MBP with OS X Mountain Lion. It's a weird problem and I'll give you as much info as I can. I've installed ruby and it's working at version 1.9.3 And I've installed ruby gems and it's worked for every other gem I've tried to install. It's version is 1.8.24 When I run $ sudo gem install rails it replies with the message: Successfully installed rails-3.2.8 1 gem installed Although when I ask it rails -v it returns: `Rails is not currently installed on this system. To get the latest version, simply type: $ sudo gem install rails You can then rerun your "rails" command.` What should I do? The rails bash file (/usr/bin/rails) contains: #!/usr/bin/ruby # Stub rails command to load rails from Gems or print an error if not installed. require 'rubygems' version = ">= 0" if ARGV.first =~ /^_(.*)_$/ and Gem::Version.correct? $1 then version = $1 ARGV.shift end begin gem 'railties', version or raise rescue Exception puts 'Rails is not currently installed on this system. To get the latest version, simply type:' puts puts ' $ sudo gem install rails' puts puts 'You can then rerun your "rails" command.' exit 0 end load Gem.bin_path('railties', 'rails', version) That must mean that the gem files aren't there or are old or corrupted How can I check that?

  Read the article

• Perl: remove relative path components but leave symlinks alone?

  - by jnylen

  I need to get Perl to remove relative path components from a Linux path. I've found a couple of functions that almost do what I want, but: File::Spec->rel2abs does too little. It does not resolve ".." into a directory properly. Cwd::realpath does too much. It resolves all symbolic links in the path, which I do not want. Perhaps the best way to illustrate how I want this function to behave is to post a bash log where FixPath is a hypothetical command that gives the desired output: '/tmp/test'$ mkdir -p a/b/c1 a/b/c2 '/tmp/test'$ cd a '/tmp/test/a'$ ln -s b link '/tmp/test/a'$ ls b link '/tmp/test/a'$ cd b '/tmp/test/a/b'$ ls c1 c2 '/tmp/test/a/b'$ FixPath . # rel2abs works here ===> /tmp/test/a/b '/tmp/test/a/b'$ FixPath .. # realpath works here ===> /tmp/test/a '/tmp/test/a/b'$ FixPath c1 # rel2abs works here ===> /tmp/test/a/b/c1 '/tmp/test/a/b'$ FixPath ../b # realpath works here ===> /tmp/test/a/b '/tmp/test/a/b'$ FixPath ../link/c1 # neither one works here ===> /tmp/test/a/link/c1 '/tmp/test/a/b'$ FixPath missing # should work for nonexistent files ===> /tmp/test/a/b/missing

  Read the article

• Server returns 500 error only when called by Java client using urlConnection/httpUrlConnection

  - by user455889

  Hi - I'm having a very strange problem. I'm trying to call a servlet (JSP) with an HTTP GET and a few parameters (http://mydomain.com/method?param1=test&param2=123). If I call it from the browser or via WGET in a bash session, it works fine. However, when I make the exact same call in a Java client using urlConnection or httpURLConnection, the server returns a 500 error. I've tried everything I have found online including: urlConn.setRequestProperty("Accept-Language", "en-us,en;q=0.5"); Nothing I've tried, however, has worked. Unfortunately, I don't have access to the server I'm calling so I can't see the logs. Here's the latest code: private String testURLConnection() { String ret = ""; String url = "http://localhost:8080/TestService/test"; String query = "param1=value1&param2=value2"; try { URLConnection connection = new URL(url + "?" + query).openConnection(); connection.setRequestProperty("Accept-Charset", "UTF-8"); connection.setRequestProperty("Accept-Language", "en-us,en;q=0.5"); BufferedReader bufferedReader = new BufferedReader(new InputStreamReader(connection.getInputStream())); String line; StringBuilder content = new StringBuilder(); while ((line = bufferedReader.readLine()) != null) { content.append(line + "\n"); } bufferedReader.close(); metaRet = content.toString(); log.debug(methodName + " return = " + metaRet); } catch (Exception ex) { log.error("Exception: " + ex); log.error("stack trace: " + getStackTrace(ex)); } return metaRet; } Any help would be greatly appreciated!

  Read the article

• CGI Buffering issue

  - by Punit

  I have a server side C based CGI code as: cgiFormFileSize("UPDATEFILE", &size); //UPDATEFILE = file being uploaded cgiFormFileName("UPDATEFILE", file_name, 1024); cgiFormFileContentType("UPDATEFILE", mime_type, 1024); buffer = malloc(sizeof(char) * size); if (cgiFormFileOpen("UPDATEFILE", &file) != cgiFormSuccess) { exit(1); } output = fopen("/tmp/cgi.tar.gz", "w+"); printf("The size of file is: %d bytes", size); inc = size/(1024*100); while (cgiFormFileRead(file, b, sizeof(b), &got_count) == cgiFormSuccess) { fwrite(b,sizeof(char),got_count,output); i++; if(i == inc && j<=100) { ***inc_pb*** = j; i = 0; j++; // j is the progress bar increment value } } cgiFormFileClose(file); retval = system("mkdir /tmp/update-tmp;\ cd /tmp/update-tmp;\ tar -xzf ../cgi.tar.gz;\ bash -c /tmp/update-tmp/update.sh"); However, this doesn't work the way as is seen above. Instead of printing 1,2,...100 to progress_bar.txt one by one it prints at ONE GO, seems it buffers and then writes to the file. fflush() also didn't work. Any clue/suggestion would be really appreciated.

  Read the article

• Building a custom Linux Live CD

  - by Mike Heinz

  Can anyone point me to a good tutorial on creating a bootable Linux CD from scratch? I need help with a fairly specialized problem: my firm sells an expansion card that requires custom firmware. Currently we use an extremely old live CD image of RH7.2 that we update with current firmware. Manufacturing puts the cards in a machine, boots off the CD, the CD writes the firmware, they power off and pull the cards. Because of this cycle, it's essential that the CD boot and shut down as quickly as possible. The problem is that with the next generation of cards, I have to update the CD to a 2.6 kernel. It's easy enough to acquire a pre-existing live CD - but those all are designed for showing off Linux on the desktop - which means they take forever to boot. Can anyone fix me up with a current How-To? Update: So, just as a final update for anyone reading this later - the tool I ended up using was "livecd-creator". My reason for choosing this tool was that it is available for RedHat-based distributions like CentOs, Fedora and RHEL - which are all distributions that my company supports already. In addition, while the project is very poorly documented it is extremely customizable. I was able to create a minimal LiveCD and edit the boot sequence so that it booted directly into the firmware updater instead of a bash shell. The whole job would have only taken an hour or two if there had been a README explaining the configuration file!

  Read the article

• Secure Copy File from remote server via scp and os module in Python

  - by user1063572

  I'm pretty new to Python and programming. I'm trying to copy a file between two computers via a python script. However the code os.system("ssh " + hostname + " scp " + filepath + " " + user + "@" + localhost + ":" cwd) won't work. I think it needs a password, as descriped in How do I copy a file to a remote server in python using scp or ssh?. I didn't get any error logs, the file just won't show in my current working directory. However every other command with os.system("ssh " + hostname + "command") or os.popen("ssh " + hostname + "command") does work. - command = e.g. ls When I try ssh hostname scp file user@local:directory in the commandline it works without entering a password. I tried to combine os.popen commands with getpass and pxssh module to establish a ssh connection to the remote server and use it to send commands directly (I only tested it for an easy command): import pxssh import getpass ssh = pxssh.pxssh() ssh.force_password = True hostname = raw_input("Hostname: ") user = raw_input("Username: ") password = getpass.getpass("Password: ") ssh.login(hostname, user, password) test = os.popen("hostname") print test But I'm not able to put commands through to the remote server (print test shows, that hostname = local and not the remote server), however I'm sure, the conection is established. I thought it would be easier to establish a connection than always use "ssh " + hostname in the bash commands. I also tried some of the workarounds in How do I copy a file to a remote server in python using scp or ssh?, but I must admit due to lack of expirience I didn't get them to work. Thanks a lot for helping me.

  Read the article

• Why can't I display a unicode character in the Python Interpreter on Mac OS X Terminal.app?

  - by apphacker

  If I try to paste a unicode character such as the middle dot: · in my python interpreter it does nothing. I'm using Terminal.app on Mac OS X and when I'm simply in in bash I have no trouble: :~$ · But in the interpreter: :~$ python Python 2.6.1 (r261:67515, Feb 11 2010, 00:51:29) [GCC 4.2.1 (Apple Inc. build 5646)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> ^^ I get nothing, it just ignores that I just pasted the character. If I use the escape \xNN\xNN representation of the middle dot '\xc2\xb7', and try to convert to unicode, trying to show the dot causes the interpreter to throw an error: >>> unicode('\xc2\xb7') Traceback (most recent call last): File "<stdin>", line 1, in <module> UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 0: ordinal not in range(128) I have setup 'utf-8' as my default encoding in sitecustomize.py so: >>> sys.getdefaultencoding() 'utf-8' What gives? It's not the Terminal. It's not Python, what am I doing wrong?! This question is not related to this question, as that indivdiual is able to paste unicode into his Terminal.

  Read the article

• Spawning vim from a node git hook

  - by Lawrence Jones

  I've got a project purely in coffeescript, with git hooks for deployment also written in cs. I don't really want to break away from the language just to use bash for a quick commit message formatter, but I've got a problem spawning vim from the commit-msg hook. I've seen here that when piping to vim, the stdio is not necessarily set correctly to the tty streams. I get how that could cause a problem, but I don't exactly know how to get vim to load correctly using nodes spawn command. At the moment I have... vim = (require 'child_process').spawn('vim', [file], stdio: 'inherit') vim.on 'exit', (err) -> console.log "Exited! [#{err}]" cb?() ...which works fine to spawn a vim process that can r/w from the parents stdio, but when I use this in the hook things go wrong. Vim states that the stdio is not from terminal, and then once opened typing causes escape characters to pop up all over the place. Backspace for example, will produce ^?. Any help would be appreciated!

  Read the article

• How can I remove relative path components but leave symlinks alone in Perl?

  - by jnylen

  I need to get Perl to remove relative path components from a Linux path. I've found a couple of functions that almost do what I want, but: File::Spec->rel2abs does too little. It does not resolve ".." into a directory properly. Cwd::realpath does too much. It resolves all symbolic links in the path, which I do not want. Perhaps the best way to illustrate how I want this function to behave is to post a bash log where FixPath is a hypothetical command that gives the desired output: '/tmp/test'$ mkdir -p a/b/c1 a/b/c2 '/tmp/test'$ cd a '/tmp/test/a'$ ln -s b link '/tmp/test/a'$ ls b link '/tmp/test/a'$ cd b '/tmp/test/a/b'$ ls c1 c2 '/tmp/test/a/b'$ FixPath . # rel2abs works here ===> /tmp/test/a/b '/tmp/test/a/b'$ FixPath .. # realpath works here ===> /tmp/test/a '/tmp/test/a/b'$ FixPath c1 # rel2abs works here ===> /tmp/test/a/b/c1 '/tmp/test/a/b'$ FixPath ../b # realpath works here ===> /tmp/test/a/b '/tmp/test/a/b'$ FixPath ../link/c1 # neither one works here ===> /tmp/test/a/link/c1 '/tmp/test/a/b'$ FixPath missing # should work for nonexistent files ===> /tmp/test/a/b/missing

  Read the article

• Which technology should I use to transform my latex documents into html documents

  - by Matthias Günther

  Hey, I want to write a little program that transforms my TeX files into HTML. I want to parse the documents and turn the macros (the build-in and of course my own) into HTML pieces. Here are my requirements: predefined rules (e.g. begin{itemize} \item text \end{itemize} = <br> <p>text </p> <br/>) defining own CSS style ability to convert formulars (extract the formulars, load them in an imagecreator and then save the jpg/png) easy to maintain and concise I know there are several technologies out there, but I don't exactly know which is the best for me. Here are the technologies which flow into my mind Ruby (I/O is easy, formular loading via webrat), XML XSLT (I don't think that I need just overhead) perl (there are many libs out there but I'm not quite familiar with it) bash (I worked with sed and was surprised how easy it was to work with regular expressions) latex2html ... (these converters won't work for me and they don't give me freedom in parsing) Any suggestions, hints and comments are welcome. Thanks for your time, folks.

  Read the article

• Using awk to return only certain chunks of data

  - by Koriar

  I'm not 100% certain how to phrase my question simply, so I apologize if this has been answered somewhere and I was just unable to find it. What I have are debug logs with authentication packets in them along with a bunch of other output. I need to search through about 2 million lines of logs to find every packet that contains a certain mac address. The packets look something like this (slightly censored): -----------------[ header ]----------------- Event: Authd-Response (1900) Sequence: -54 Timestamp: 1969-12-31 19:30:00 (0) ---------------[ attributes ]--------------- Auth-Result = Auth-Accept Service-Profile-SID = 53 Service-Profile-SID = 49 RADIUS-Access-Accept-Attr/WiMAX-Capability = 0x(numbers) Session-Timeout = 3600 Service-Profile-SID = 4 Service-Profile-SID = 29 Chargeable-User-Identity = "(Numbers)" User-Password = "(the MAC address I'm looking for)" -------------------------------------------- However there are about 10 different possible types with different possible lengths. They all start with the header line and end with the all-dashes line. I've had success using awk to get the code blocks themselves using this: awk '/-----------------\[ header \]-----------------/,/--------------------------------------------/' filename.txt But I was hoping to be able to use it to return only the packets which contain the MAC address that I need. I've been trying to figure this out for a few days now and I'm pretty stuck. I could try and write a bash script, but I could swear that I've used awk to do something like this before...

  Read the article

• How can I unit test a PHP class method that executes a command-line program?

  - by acoulton

  For a PHP application I'm developing, I need to read the current git revision SHA which of course I can get easily by using shell_exec or backticks to execute the git command line client. I have obviously put this call into a method of its very own, so that I can easily isolate and mock this for the rest of my unit tests. So my class looks a bit like this: class Task_Bundle { public function execute() { // Do things $revision = $this->git_sha(); // Do more things } protected function git_sha() { return `git rev-parse --short HEAD`; } } Of course, although I can test most of the class by mocking git_sha, I'm struggling to see how to test the actual git_sha() method because I don't see a way to create a known state for it. I don't think there's any real value in a unit test that also calls git rev-parse to compare the results? I was wondering about at least asserting that the command had been run, but I can't see any way to get a history of shell commands executed by PHP - even if I specify that PHP should use BASH rather than SH the history list comes up empty, I presume because the separate backticks executions are separate terminal sessions. I'd love to hear any suggestions for how I might test this, or is it OK to just leave that method untested and be careful with it when the app is being maintained in future?

  Read the article

• Run a command as cron would but from the command line.

  - by BCS

  I have a script that I'm trying to run from cron. When I run it from bash, it work just fine. However when I let cron do it's thing, I get a: myscript.sh: line 122: syntax error: unexpected end of file What I want is a way to run a command as if it was a cron job, but do it in my shell. As a side note: does anyone know what would be differnt under cron? (the script already has a #!/bin/sh line) To answer my own question: I added this to my crontab: * * * * * bcs for ((i=1; i <= 55; i++)) ; do find ~/.crontemp/ -name '*.run' -exec "{}" ";" ; sleep 1; done` and created this script: #!/bin/sh tmp=$(mktemp ~/.crontemp/cron.XXXXX) mknod $tmp.pipe p mv $tmp $tmp.pre echo $* '>' $tmp.pipe '1>&2' >> $tmp.pre echo rm $tmp.run >> $tmp.pre chmod 700 $tmp.pre mv $tmp.pre $tmp.run cat $tmp.pipe rm $tmp.pipe With that, I can run an arbitrary command with a delay of not more than one second. (And yes, I know there are all kinds of security issue involved in that)

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >