Search Results

Search found 37152 results on 1487 pages for 'shared access'.

Page 144/1487 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• Windows 7 - cannot access my own external disk

  - by Tomas

  I use Windows 7 Home Premium and external USB disk with NTFS partition. I cannot write-access the my own files on it, even as a member of Admnistrators group! Is there any way how to go around this permission checking, without actually writing some permission information to every folder on it? I have 3 external disks (up to 1TB), and I have thousands hundreds of files on each!!! Doing some permission change, that will actually go recursivelly through all folders on all my disks is plain brain damage!! 1) Is there any way how to change it somehow globally? (like mount options...) .. Or how to go around this annoying permission checking? It was working in Win XP normally! 2) if not, and I must do the recursive operation on all folders, how to do it PERMANENTLY, so that I don't need to do it again on another Windows 7 computer!

  Read the article

• installing packages without sudo access

  - by whitman

  Is there an easy way to install packages with a large dependency tree, provided that you don't have superuser access? For instance, say I wanted to install firefox. Firefox has a ton of dependencies, each of which have their own dependencies, etc. Installing these the "./configure; make; make install" way would take forever. Is there an option I can give apt-get to make it install in a personal directory? Or is there a way to hack it to do all the heavy lifting for me?

  Read the article

• VPN Authentication Credentials (Local/Remote Identifiers) For Remote Access VPN

  - by thatidiotguy

  So I am trying to set up a remote access VPN using the free ShrewSoft vpn client: https://www.shrew.net/software I want to use a PSK as the authentication mechanism combined with XAuth so that a connection requires a valid username/pass combo. Under the authentication tab this particular VPN Client however is asking for a Local Identity and a Remote Identity. The options for Local Identity Type are: Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier The options for Remote Identity are: Any Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier My current thinking is that I can use the Fully Qualifed Domain Name provided by the remote firewall for the Remote Identity, but I do not know what it wants for local identity. Just to stress: I am not trying to set up a site to site VPN. Can anybody shed any light on what I am missing here? A screenshot can be provided if that would be helpful. The current error I am getting during the connection is: IKE Responder: Proposed IKE ID mismatch

  Read the article

• Linux File Permissions & Access Control Query

  - by Jason

  Hi, Lets say I am user: bob & group: users. There is this file: -rw----r-- 1 root users 4 May 8 22:34 testfile First question, why can't bob read the file as it's readable by others? Is it simply that if you are denied by group, then you are auto-blacklisted for others? I always assumed that the final 3 bits too precedence over user/group permission bits, guess I was wrong... Second question, how is this implemented? I suppose it's linked to the first query, but how does this work in relation to Access Control, is it related to how ACLs work / are queried? Just trying to understand how these 9 permission bits are actually implemented/used in Linux. Thanks alot.

  Read the article

• SBS 2008 File access restrictions after 5:30PM

  - by Moif Murphy

  Hi there, SBS 2008, I have an issue whereby a user can't access a file after 5:30PM. They get the message: "cannot be accessed. The file may be corrupted, located on a server that is not responding, or read only I've checked the logon hours on the AD User account in question and there's no restrictions there. I have noticed that the account in question does not appear in the SBS Console, only in ADUC which means the account wasn't added using the wizard. It's a long shot but would that make a difference? Other than that I'm pretty stumped, any suggestions welcomed. Thanks

  Read the article

• Access denied for user 'diduser'@'localhost' to database 'diddata' (1044, 42000)

  - by Arlen Beiler

  I am trying to setup a MySQL server and when I went to create a second user it wouldn't give it permissions for the database. I can connect fine as long as I don't specify a database. Access denied for user 'user'@'localhost' to database 'diddata' The connection details are: { 'host' : 'localhost', 'user' : 'user', 'password' : 'password' , 'database': 'diddata' }; And to create the DB and table I did: CREATE DATABASE IF NOT exists diddata; CREATE USER 'user'@'localhost' IDENTIFIED BY 'password'; GRANT ALL ON user.* TO 'user'@'localhost'; Note that I've changed the username and password in this question. I've already checked the privileges in MySQL workbench and they are there.

  Read the article

• Unauthorized access error to html pages in IIS 7.0

  - by George2

  I am using VSTS 2008 + C# + .Net 3.5 + IIS 7.0. I have created a new web site and put an html file into the directory. And when I use browse function in IIS manager to browse the html file, I met with the following error, any ideas what is wrong? BTW: I am very confused about unauthorized error since I run the worker process under administrator account. From the error message, I am confused why the logon method is anonymous and not using administrator account? HTTP Error 401.3 - Unauthorized You do not have permission to view this directory or page because of the access control list (ACL) configuration or encryption settings for this resource on the Web server. Module IIS Web Core Notification AuthenticateRequest Handler StaticFile Error Code 0x80070005 Requested URL http://localhost:80/a.html Physical Path C:\test\simplehosttest\a.html Logon Method Anonymous Logon User Anonymous thanks in advance, George

  Read the article

• MySQL ERROR 1045 Access Denied

  - by winarm

  Hello- I recently installed MySQL on Fedora13. Now, when I try to create a database, it denies me access. I tried resetting the password and it does not recognize my system root. I tried resetting password with an init-file containing: UPDATE mysql.user SET Password=PASSWORD('MyNewPass') WHERE User='root'; FLUSH PRIVILEGES; I tried uninstall and then reinstall and it is still not working. I am new to Linux and not comfortable with the filesystem. Talk to me like I'm four. Thank you, kindly.

  Read the article

• Avoid access to www subdomain on secure server

  - by user44654

  I have an SSL certificate that is valid for mysite.co.uk but not www.mysite.co.uk it seems. If I use mod_rewrite or .htaccess to redirect from one to the other will this prevent browsers from displaying an invalid certificate security warning if someone tries to access www.mysite.co.uk? (I've tried redirection but still get the warning if I type https://www.mysite.co.uk directly into the address bar of my browser. I want to know if this is because the redirection isn't working or if the browser will display the warning anyway.) I hope that makes sense.

  Read the article

• Can't access server from external IP

  - by Mathias

  I have a problem with my web server; I can't access it from the external IP address. I'm using an IIS 7 server, but I've tried with apache on Linux as well. I have forwarded all traffic on port 80 to my computer, but it just won't work. I've done port forwarding with my Minecraft server, and it did work, but when I try it with a web server, no. I've been looking on many many forums, but their methods don't work for me. My router is a Speedport W 723V, if anyone knows that one. Any help is appreciated.

  Read the article

• Unable to SSH into ESXi 4.1 host - "Access Denied"

  - by Andrew White

  I am unable to SSH into an existing ESXi server. I have a user which is in the "root" and "users" group and is able to connect via vSphere. However after enabling "Remote support (SSH)", attempting to connect by putty and entering my username/password when prompted I am presented with an "Access Denied" message. I have run through the options presented at this KB article to no avail. I have taken down the firewall on the machine (it is remote) temporarily to check if this helped - no change. The username/password are definitely correct and I can obviously get connectivity if I am presented with the username/password prompt. I am at a bit of a loss what else I can try. Thanks all

  Read the article

• Need to access Mac via ssh remotely through another Mac with Internet Sharing

  - by Ze'ev

  My setup at office is: Internet - AirportExtreme --(wifi)-- AirportExpress --(eth)-- MacPro1 --(eth)-- MacPro2 I want to be able to access MacPro2 from laptop at home via ssh (and sftp). Is it possible? The AirportExtreme is set to "DHCP and NAT" and is doling out 10.0.1.xxx IPs. The AirportExpress is 10.0.1.2. MacPro1 is 10.0.1.3 via Ethernet to AirportExpress. It is then connected by 2nd Ethernet port (192.168.2.1) to MacPro2, which is 192.168.2.2. Is there any way to "tunnel through" to MacPro2 from home? Thanks!

  Read the article

• I can access my company mail on iPhone, but not on a PC/Mac

  - by Philippe

  On my iPhone (4), I can set up my company e-mail, which allows me to receive and send e-mail and use the calender to manage appointments. The company is using Exchange 2003. The problem is that this is the only way I can access my e-mail when I'm not at the office. I've tried setting up an account on Outlook 2007, Outlook 2010, Outlook 2011 (Mac) and the OSX Mail app, but it doesn't work. The server cannot be reached, even though I've used the exact same settings as on the iPhone. The info I use on the iPhone is: Server name of the company mail server (it's the same as for webmail) Use SSL AD Domain of my account My AD account name Password When I enter this on the iPhone, it works like a charm, but whatever I try on one of my desktops, it doesn't work. FYI: I can't ask the company IT guys because according to them, it doesn't work from a remote location, not even on the iPhone (but obviously, that works just fine)

  Read the article

• Unauthorized computer use via keyboard or remote access?

  - by brydaverambo

  I’m suspecting my computer is being used when I’m not at home. This is happening either physically or remotely. My wireless switch is off. Is there any way possible to detect and/or monitor activity without purchasing software? My settings are being changed as well as passwords (Bios PW was changed and I cannot access Bios settings). I connect via the network cable. Is it possible for someone (in range) to connect to my laptop even if the wireless switch is off? This is a Dell Inspiron 1720 with the WLAN 1395 card. Here’s the kicker. When I try to download freeware for monitoring activity, I am not allowed to do this! ????

  Read the article

• Unable to delete a directory from NTFS drive: "Access is denied"

  - by EMP

  I'm running Windows XP Pro x64 SP2. I have a directory on an NTFS drive that was created by a Maven build. A subsequent build attempted to delete this directory and failed. I now get the error "Access is denied" whenever I try to do anything with that directory: change to it, delete it, rename it. This happens both in Windows Explorer and from a command prompt. The properties dialog in Windows Explorer doesn't even contain the Security tab. I created the directory, so I don't think this is truly a permissions issue. I've occasionally had this error happen in the past is well. I believe the error is misleading, but the question is: what is the real problem and how do I fix it?

  Read the article

• Security considerations in providing VPN access to non-company issued computers [migrated]

  - by DKNUCKLES

  There have been a few people at my office that have requested the installation of DropBox on their computers to synchronize files so they can work on them at home. I have always been wary about cloud computing, mainly because we are a Canadian company and enjoy the privacy and being outside the reach of the Patriot Act. The policy before I started was that employees with company issued notebooks could be issued a VPN account, and everyone else had to have a remote desktop connection. The theory behind this logic (as I understand it) was that we had the potential to lock down the notebooks whereas the employees home computers were outside of our grasp. We had no ability to ensure they weren't running as administrator all the time / were running AV so they were a higher risk at being infected with malware and could compromise network security. With the increase in people wanting DropBox I'm curious as to whether or not this policy is too restrictive and overly paranoid. Is it generally safe to provide VPN access to an employee without knowing what their computing environment looks like?

  Read the article

• Remote access over VPN machine

  - by w_harry

  Here is my scenario. I have Comp1 which has VPN installed on it & working fine. I have made Comp1 as remote enabled as well. Now i want to log in to Comp1 ( remotely) from Comp2. Without starting the VPN, remote desktop works fine from Comp2 to Comp1. When i connect to VPN on Comp1 the remote desktop from Comp2 breaks. Is there a way i can run VPN on Comp1 and be able to access from Comp2 remotely. If there is change in settings, please advice. Regards

  Read the article

• Access requires a username and password

  - by articles

  Access requires a username and password Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection) I am getting this above message. I have hosted a website in godaddy hosting space. But when i run it.. it is prompt for User name and Password (above message). I am not using windows authentications in my website.... Moreover, i have test my website code on testing server....it never prompts for this message unless Integrated Windows Authentication is checked. Any help is appreciated.. Thanks

  Read the article

• Apache: Stealth 404 the admin area until authenticated via basic auth, then allow access

  - by Kzqai

  Given a administrative area with urls like this: wp-admin/ wp-admin/whatever wp-admin/another-page wp-adminsecretlogin/ A standard basic-auth coverage would provide a username and password prompt on all three urls, and return a 403 on all failed auth attempts. This is a pretty obvious signal that something exists there, and thus is an invitation to script/brute force access. I would like to instead, require basic auth everywhere, but when not authenticated, not prompt for username and password, and instead return a 404 not found error for all urls except a wp-adminsecretlogin/ url. At that individual-to-the-site url, basic auth could go through, and unlock the rest of the administrative functionality (though the standard application login would still be necessary). How would I do that via apache .htaccess or .conf directives?

  Read the article

• Apache2: How do I restrict access to a directory, but allow access to one file within it?

  - by Nick

  I've inherited a poorly designed web app, which has a certain file that needs to be publicly accessible, but that file is inside a directory which should not. In other words, I need a way to block all files and sub-directories within a directory, but over-ride it for a single file. I'm trying this: # No one needs to access this directly <Directory /var/www/DangerousDirectory/> Order Deny,allow Deny from all # But this file is OK: <Files /var/www/DangerousDirectory/SafeFile.html> Allow from all </Files> </Directory> But it's not working- it just blocks everything including the file I want to allow. Any suggestions?

  Read the article

• ldap samba user access issue

  - by ancillary

  I have a samba share that is on the LAN. It is auth'd via ldap. Users access file system via ad windows shares. There are shortcuts in directories that point to dir's on samba. Typically a user will click the shortcut to the smb dir, and will be met with a permission denied error. Upon closing explorer and reopening, it will work. DNS is handled by the domain controller, and that is the only server any of the machines use for DNS. Nothing in eventvwr. Only see successful auth entries in samba log. Any ideas?

  Read the article

• Access MacZFS via network from XBMC

  - by AreusAstarte

  I have a ZFS RAID (zpool with three drives) hooked up to my Mac that I want to share in my LAN so that the XBMC client on my OUYA console hooked up to the television can read the drive and use it to stream my movies and television shows onto the television set. I've searched around for a bit but so far haven't found anything that helped me with it. I know that when connecting to the Mac with SSH I can't just access the drive due to different formatting. What do I have to do so that XBMC will be able to read it? How do I share it?

  Read the article

• Can't access to a iSCSI volume

  - by jmiguel.rodriguez

  I have a iSCSI target on a customer place I'm using from an old Fedora (Core6) server. I configured it and formatted as ext3 (mistake, now I know) and I've been working with it for some time. Now I need to access this volume from other machine. As far as I've read, I can't do it safely from two machines at the same time (yep, that's the first thing I tried). So I've umount it from original server and tried to mount it on the new server (I did it at first with Ubuntu 10 LTS but when I was unable to do it I installed another Fedora with the same configuration) with no success. The problem: I can see all target on NAS but when I do a "fdisk -l" to see all devices and know which mount I see all targets as SFS filesystem. From the original server I see all SFS (after all, they belong to my customer and don't know what he have in) except the one I manage which I see as 'Linux'. What can I do? Thank you in advanced, regards, jmiguel

  Read the article

• Store system passwords with easy and secure access

  - by CodeShining

  I'm having to handle several VPS/services and I always set passwords to be different and random. What kind of storage do you suggest to keep these passwords safe and let me access them easily? These passwords are used for services like databases, webserver user and so on that run customers' services, so it's really important to keep them in a safe place and strong. I'm actually storing them in a google drive spreadsheet file, describing user, password, role, service. Do you know of better solutions? I'd like to keep them on a remote service to make sure I don't have to make backup copies (in case my hdd would fail somehow). I do work on *nix platforms (so windows specific solutions are not a choice here).

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >