Search Results

Search found 37654 results on 1507 pages for 'function prototypes'.

Page 1457/1507 | < Previous Page | 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464  | Next Page >

  • Separate specific #ifdef branches

    - by detly
    In short: I want to generate two different source trees from the current one, based only on one preprocessor macro being defined and another being undefined, with no other changes to the source. If you are interested, here is my story... In the beginning, my code was clean. Then we made a new product, and yea, it was better. But the code saw only the same peripheral devices, so we could keep the same code. Well, almost. There was one little condition that needed to be changed, so I added: #if defined(PRODUCT_A) condition = checkCat(); #elif defined(PRODUCT_B) condition = checkCat() && checkHat(); #endif ...to one and only one source file. In the general all-source-files-include-this header file, I had: #if !(defined(PRODUCT_A)||defined(PRODUCT_B)) #error "Don't make me replace you with a small shell script. RTFM." #endif ...so that people couldn't compile it unless they explicitly defined a product type. All was well. Oh... except that modifications were made, components changed, and since the new hardware worked better we could significantly re-write the control systems. Now when I look upon the face of the code, there are more than 60 separate areas delineated by either: #ifdef PRODUCT_A ... #else ... #endif ...or the same, but for PRODUCT_B. Or even: #if defined(PRODUCT_A) ... #elif defined(PRODUCT_B) ... #endif And of course, sometimes sanity took a longer holiday and: #ifdef PRODUCT_A ... #endif #ifdef PRODUCT_B ... #endif These conditions wrap anywhere from one to two hundred lines (you'd think that the last one could be done by switching header files, but the function names need to be the same). This is insane. I would be better off maintaining two separate product-based branches in the source repo and porting any common changes. I realise this now. Is there something that can generate the two different source trees I need, based only on PRODUCT_A being defined and PRODUCT_B being undefined (and vice-versa), without touching anything else (ie. no header inclusion, no macro expansion, etc)?

    Read the article

  • Deterministic key serialization

    - by Mike Boers
    I'm writing a mapping class which uses SQLite as the storage backend. I am currently allowing only basestring keys but it would be nice if I could use a couple more types hopefully up to anything that is hashable (ie. same requirements as the builtin dict). To that end I would like to derive a deterministic serialization scheme. Ideally, I would like to know if any implementation/protocol combination of pickle is deterministic for hashable objects (e.g. can only use cPickle with protocol 0). I noticed that pickle and cPickle do not match: >>> import pickle >>> import cPickle >>> def dumps(x): ... print repr(pickle.dumps(x)) ... print repr(cPickle.dumps(x)) ... >>> dumps(1) 'I1\n.' 'I1\n.' >>> dumps('hello') "S'hello'\np0\n." "S'hello'\np1\n." >>> dumps((1, 2, 'hello')) "(I1\nI2\nS'hello'\np0\ntp1\n." "(I1\nI2\nS'hello'\np1\ntp2\n." Another option is to use repr to dump and ast.literal_eval to load. This would only be valid for builtin hashable types. I have written a function to determine if a given key would survive this process (it is rather conservative on the types it allows): def is_reprable_key(key): return type(key) in (int, str, unicode) or (type(key) == tuple and all( is_reprable_key(x) for x in key)) The question for this method is if repr itself is deterministic for the types that I have allowed here. I believe this would not survive the 2/3 version barrier due to the change in str/unicode literals. This also would not work for integers where 2**32 - 1 < x < 2**64 jumping between 32 and 64 bit platforms. Are there any other conditions (ie. do strings serialize differently under different conditions)? (If this all fails miserably then I can store the hash of the key along with the pickle of both the key and value, then iterate across rows that have a matching hash looking for one that unpickles to the expected key, but that really does complicate a few other things and I would rather not do it.) Any insights?

    Read the article

  • Supporting multiple instances of a plugin DLL with global data

    - by Bruno De Fraine
    Context: I converted a legacy standalone engine into a plugin component for a composition tool. Technically, this means that I compiled the engine code base to a C DLL which I invoke from a .NET wrapper using P/Invoke; the wrapper implements an interface defined by the composition tool. This works quite well, but now I receive the request to load multiple instances of the engine, for different projects. Since the engine keeps the project data in a set of global variables, and since the DLL with the engine code base is loaded only once, loading multiple projects means that the project data is overwritten. I can see a number of solutions, but they all have some disadvantages: You can create multiple DLLs with the same code, which are seen as different DLLs by Windows, so their code is not shared. Probably this already works if you have multiple copies of the engine DLL with different names. However, the engine is invoked from the wrapper using DllImport attributes and I think the name of the engine DLL needs to be known when compiling the wrapper. Obviously, if I have to compile different versions of the wrapper for each project, this is quite cumbersome. The engine could run as a separate process. This means that the wrapper would launch a separate process for the engine when it loads a project, and it would use some form of IPC to communicate with this process. While this is a relatively clean solution, it requires some effort to get working, I don't now which IPC technology would be best to set-up this kind of construction. There may also be a significant overhead of the communication: the engine needs to frequently exchange arrays of floating-point numbers. The engine could be adapted to support multiple projects. This means that the global variables should be put into a project structure, and every reference to the globals should be converted to a corresponding reference that is relative to a particular project. There are about 20-30 global variables, but as you can imagine, these global variables are referenced from all over the code base, so this conversion would need to be done in some automatic manner. A related problem is that you should be able to reference the "current" project structure in all places, but passing this along as an extra argument in each and every function signature is also cumbersome. Does there exist a technique (in C) to consider the current call stack and find the nearest enclosing instance of a relevant data value there? Can the stackoverflow community give some advice on these (or other) solutions?

    Read the article

  • Reading column header and column values of a data table using LAMBDA(C#3.0)

    - by Newbie
    Consider the folowing where I am reading the data table values and writing to a text file using (StreamWriter sw = new StreamWriter(@"C:\testwrite.txt",true)) { DataPreparation().AsEnumerable().ToList().ForEach(i => { string col1 = i[0].ToString(); string col2 = i[1].ToString(); string col3 = i[2].ToString(); string col4 = i[3].ToString(); sw.WriteLine( col1 + "\t" + col2 + "\t" + col3 + "\t" + col4 + Environment.NewLine ); }); } The data preparation function is as under private static DataTable DataPreparation() { DataTable dt = new DataTable(); dt.Columns.Add("Col1", typeof(string)); dt.Columns.Add("Col2", typeof(int)); dt.Columns.Add("Col3", typeof(DateTime)); dt.Columns.Add("Col4", typeof(bool)); for (int i = 0; i < 10; i++) { dt.Rows.Add("String" + i.ToString(), i, DateTime.Now.Date, (i % 2 == 0) ? true : false); } return dt; } It is working fine. Now in the above described program, it is known to me the Number of columns and the column headers. How to achieve the same in case when the column headers and number of columns are not known at compile time using the lambda expression? I have already done that which is as under public static void WriteToTxt(string directory, string FileName, DataTable outData, string delimiter) { FileStream fs = null; StreamWriter streamWriter = null; using (fs = new FileStream(directory + "\\" + FileName + ".txt", FileMode.Append, FileAccess.Write)) { try { streamWriter = new StreamWriter(fs); streamWriter.BaseStream.Seek(0, SeekOrigin.End); streamWriter.WriteLine(); DataTableReader datatableReader = outData.CreateDataReader(); for (int header = 0; header < datatableReader.FieldCount; header++) { streamWriter.Write(outData.Columns[header].ToString() + delimiter); } streamWriter.WriteLine(); int row = 0; while (datatableReader.Read()) { for (int field = 0; field < datatableReader.FieldCount; field++) { streamWriter.Write(outData.Rows[row][field].ToString() + delimiter); } streamWriter.WriteLine(); row++; } } catch (Exception ex) { throw ex; } } } I am using C#3.0 and framework 3.5 Thanks in advance

    Read the article

  • Magento user created attribute for products is not saved...

    - by Elzo Valugi
    I am fighting an apparently simple thing for about two days now. I hope somebody can help. I created the myUpdate EAV attribute class Company_Module_Model_Resource_Eav_Mysql4_Setup extends Mage_Eav_Model_Entity_Setup { public function getDefaultEntities() { return array( 'catalog_product' => array( 'entity_model' => 'catalog/product', 'attribute_model' => 'catalog/resource_eav_attribute', 'table' => 'catalog/product', 'additional_attribute_table' => 'catalog/eav_attribute', 'entity_attribute_collection' => 'catalog/product_attribute_collection', 'attributes' => array( 'my_update' => array( 'label' => 'My timestamp', 'type' => 'datetime', 'input' => 'date', 'default' => '', 'class' => 'validate-date', 'backend' => 'eav/entity_attribute_backend_datetime', 'frontend' => '', 'table' => '', 'source' => '', 'global' => Mage_Catalog_Model_Resource_Eav_Attribute::SCOPE_GLOBAL, 'visible' => true, 'required' => false, 'user_defined' => true, 'searchable' => false, 'filterable' => false, 'comparable' => false, 'visible_on_front' => false, 'visible_in_advanced_search' => false, 'unique' => false, 'apply_to' => 'simple', ) ) ) ); } } The attribute is created OK and on install appears correctly in the list of attributes. Later I do // for product 1 $product->setMyUpdate($stringDate); // string this format: yyyy-MM-dd HH:mm:ss $product->save(); // and saves without issues * in admin module But later when I do: $product = Mage::getModel('catalog/product')->load(1); var_dump($product->getMyUpdate()); // returns null Somehow the data is not really saved.. or I am not retrieving it correctly. Please advice on how to get the data and where the data is saved in the DB so I can check at if the insert is done correctly. Thanks.

    Read the article

  • PHP GD Allowed memory size exhausted

    - by gurun8
    I'm trying to process a directory of JPEG images (roughly 600+, ranging from 50k to 500k) using PHP: GD to resize and save the images but I've hit a bit of a snag quite early in the process. After correctly processing just 3 images (30K, 18K and 231K) I get a Allowed memory size of 16777216 bytes exhausted PHP Fatal error. I'm cycling through the images and calling the code below: list($w, $h) = getimagesize($src); if ($w > $it->width) { $newwidth = $it->width; $newheight = round(($newwidth * $h) / $w); } elseif ($w > $it->height) { $newheight = $it->height; $newwidth = round(($newheight * $w) / $h); } else { $newwidth = $w; $newheight = $h; } // create resize image $img = imagecreatetruecolor($newwidth, $newheight); $org = imagecreatefromjpeg($src); // Resize imagecopyresized($img, $org, 0, 0, 0, 0, $newwidth, $newheight, $w, $h); imagedestroy($org); imagejpeg($img, $dest); // Free up memory imagedestroy($img); I've tried to free up memory with the imagedestroy function but it doesn't seem to have any affect. The script just keeps consistently choking at the imagecreatefromjpeg line of code. I checked the php.ini and the memory_limit = 16M setting seems like it's holding correctly. But I can't figure out why the memory is filling up. Shouldn't it be releasing the memory back to the garbage collector? I don't really want to increase the memory_limit setting. This seems like a bad workaround that could potentially lead to more issues in the future. FYI: I'm running my script from a command prompt. It shouldn't affect the functionality but might influence your response so I thought I should mention it. Can anyone see if I'm just missing something simple or if there's a design flaw here? You'd think that this would be a pretty straightforward task. Surely this has to be possible, right?

    Read the article

  • iPhone Gps logging inaccurate

    - by Martijn
    I'm logging gps points during a walk. Below it shows the function that the coordinates are saved each 5 seconds. i Did several tests but i cannot get the right accuracy i want. (When testing the sky is clear also tests in google maps shows me that the gps signal is good). here is the code: -(void)viewDidAppear:(BOOL)animated{ if (self.locationManager == nil){ self.locationManager = [[[CLLocationManager alloc] init] autorelease]; locationManager.delegate = self; // only notify under 100 m accuracy locationManager.distanceFilter = 100.0f; locationManager.desiredAccuracy= kCLLocationAccuracyBest; [locationManager startUpdatingLocation]; } } - start logging [NSTimer scheduledTimerWithTimeInterval:5 target:self selector:@selector(getData) userInfo:nil repeats:YES]; </code> <code> -(void)getData{ int distance; // re-use location. if ([ [NSString stringWithFormat:@"%1.2f",previousLat] isEqualToString:@"0.00"]){ // if previous location is not available, do nothing distance = 0; }else{ CLLocation *loc1 = [[CLLocation alloc] initWithLatitude:previousLat longitude:previousLong]; CLLocation *loc2 = [[CLLocation alloc] initWithLatitude:latGlobal longitude:longGlobal]; distance = [loc1 getDistanceFrom: loc2]; } // overwrite latGlobal with new variable previousLat = latGlobal; previousLong = longGlobal; // store location and save data to database // this part goes ok } - (void)locationManager:(CLLocationManager *)manager didUpdateToLocation:(CLLocation *)newLocation fromLocation:(CLLocation *)oldLocation { // track the time to get a new gps result (for gps indicator orb) lastPointTimestamp = [newLocation.timestamp copy]; // test that the horizontal accuracy does not indicate an invalid measurement if (newLocation.horizontalAccuracy < 0) return; // test the age of the location measurement to determine if the measurement is cached // don't rely on cached measurements NSTimeInterval locationAge = -[newLocation.timestamp timeIntervalSinceNow]; if (locationAge > 5.0) return; latGlobal = fabs(newLocation.coordinate.latitude); longGlobal= fabs(newLocation.coordinate.longitude); } I have taken a screenshot of the plot results (the walk takes 30 minutes) and an example of what i'am trying to acomplish: http://www.flickr.com/photos/21258341@N07/4623969014/ i really hope someone can put me in the right direction.

    Read the article

  • GHC.Generics and Type Families

    - by jberryman
    This is a question related to my module here, and is simplified a bit. It's also related to this previous question, in which I oversimplified my problem and didn't get the answer I was looking for. I hope this isn't too specific, and please change the title if you can think if a better one. Background My module uses a concurrent chan, split into a read side and write side. I use a special class with an associated type synonym to support polymorphic channel "joins": {-# LANGUAGE TypeFamilies #-} class Sources s where type Joined s newJoinedChan :: IO (s, Messages (Joined s)) -- NOT EXPORTED --output and input sides of channel: data Messages a -- NOT EXPORTED data Mailbox a instance Sources (Mailbox a) where type Joined (Mailbox a) = a newJoinedChan = undefined instance (Sources a, Sources b)=> Sources (a,b) where type Joined (a,b) = (Joined a, Joined b) newJoinedChan = undefined -- and so on for tuples of 3,4,5... The code above allows us to do this kind of thing: example = do (mb , msgsA) <- newJoinedChan ((mb1, mb2), msgsB) <- newJoinedChan --say that: msgsA, msgsB :: Messages (Int,Int) --and: mb :: Mailbox (Int,Int) -- mb1,mb2 :: Mailbox Int We have a recursive action called a Behavior that we can run on the messages we pull out of the "read" end of the channel: newtype Behavior a = Behavior (a -> IO (Behavior a)) runBehaviorOn :: Behavior a -> Messages a -> IO () -- NOT EXPORTED This would allow us to run a Behavior (Int,Int) on either of msgsA or msgsB, where in the second case both Ints in the tuple it receives actually came through separate Mailboxes. This is all tied together for the user in the exposed spawn function spawn :: (Sources s) => Behavior (Joined s) -> IO s ...which calls newJoinedChan and runBehaviorOn, and returns the input Sources. What I'd like to do I'd like users to be able to create a Behavior of arbitrary product type (not just tuples) , so for instance we could run a Behavior (Pair Int Int) on the example Messages above. I'd like to do this with GHC.Generics while still having a polymorphic Sources, but can't manage to make it work. spawn :: (Sources s, Generic (Joined s), Rep (Joined s) ~ ??) => Behavior (Joined s) -> IO s The parts of the above example that are actually exposed in the API are the fst of the newJoinedChan action, and Behaviors, so an acceptable solution can modify one or all of runBehaviorOn or the snd of newJoinedChan. I'll also be extending the API above to support sums (not implemented yet) like Behavior (Either a b) so I hoped GHC.Generics would work for me. Questions Is there a way I can extend the API above to support arbitrary Generic a=> Behavior a? If not using GHC's Generics, are there other ways I can get the API I want with minimal end-user pain (i.e. they just have to add a deriving clause to their type)?

    Read the article

  • disabling dropdownlist inside a gridview based on value selected on another dropdownlist inside the gridview from javascript or jquery

    - by Joy
    what i m trying is i hav two dropdownlists inside the gridview... namely say ddonsiteoffsite and ddhours... now what i want is if the selectedtext of ddonsiteoffsite is "onsite" the ddhours should b disabled... i tried the code snippet but ... its not disabling the ddhours... can someone help me please.. <asp:TemplateColumn HeaderText=" OnSite/OffSite" > <ItemTemplate> <asp:DropDownList ID="ddOnsiteOffside" runat="server" onchange="ToggleOnOff(this)"><asp:ListItem Text = "Offsite" Value="Offsite"></asp:ListItem> <asp:ListItem Text = "Onsite" Value="Onsite"></asp:ListItem> </asp:DropDownList> </ItemTemplate> </asp:TemplateColumn> <asp:TemplateColumn> <ItemTemplate> <asp:DropDownList ID="ddhours" runat="server"> <asp:ListItem Text = "1" Value="1" ></asp:ListItem> <asp:ListItem Text = "2" Value="2" ></asp:ListItem> <asp:ListItem Text = "3" Value="3" ></asp:ListItem> <asp:ListItem Text = "4" Value="4" ></asp:ListItem> <asp:ListItem Text = "5" Value="5" ></asp:ListItem> <asp:ListItem Text = "6" Value="6" ></asp:ListItem> <asp:ListItem Text = "7" Value="7" ></asp:ListItem> <asp:ListItem Text = "8" Value="8" ></asp:ListItem> <asp:ListItem Text = "9" Value="9" ></asp:ListItem> </asp:DropDownList> </ItemTemplate> </asp:TemplateColumn> and the corresponding javascript i am using is : enter code here function ToggleOnOff(ddonoff) { var row = chk.parentNode.parentNode; if(ddonoff.value=="Onsite") { row.getElementsByTagName("ddhours")[0].disabled = true; } else row.getElementsByTagName("ddhours")[0].disabled = false; } can someone help to achieve this ?? using javascript or jquery ? i m not understanding where i went wrong ...

    Read the article

  • How to listen for file system changes MAC - kFSEventStreamCreateFlagWatchRoot

    - by Cocoa Newbie
    Hi All, I am listening for Directory and disk changes in a COCOA project using FSEvents. I need to get events when a root folder is renamed or deleted. So, I passed kFSEventStreamCreateFlagWatchRoot while creating the FSEventStream.But even if I delete or rename the root folder I am not getting corresponding FSEventStreamEventFlags. Any idea what could possibly be the issue. I am listening for changes in a USB mounted device. I used both FSEventStreamCreate and FSEventStreamCreateRelativeToDevice. One thing I notices is when I try with FSEventStreamCreate I get the following error message while creating FSEventStream: (CarbonCore.framework) FSEventStreamCreate: watch_all_parents: error trying to add kqueue for fd 7 (/Volumes/NO NAME; Operation not supported) But with FSEventStreamCreateRelativeToDevice there are no errors but still not getting kFSEventStreamEventFlagRootChanged in event flags. Also, while creation using FSEventStreamCreateRelativeToDevice apple say's if I want to listen to root path changes pass emty string "". But I am not able to listen to root path changes by passing empty string. But when I pass "/" it works. But even for "/" I do not get any proper FSEventStreamEventFlags. I am pasting the code here: -(void) subscribeFileSystemChanges:(NSString*) path { PRINT_FUNCTION_BEGIN; // if already subscribed then unsubscribe if (stream) { FSEventStreamStop(stream); FSEventStreamInvalidate(stream); /* will remove from runloop */ FSEventStreamRelease(stream); } FSEventStreamContext cntxt = {0}; cntxt.info = self; CFArrayRef pathsToWatch = CFArrayCreate(NULL, (const void**)&path, 1, NULL); stream = FSEventStreamCreate(NULL, &feCallback, &cntxt, pathsToWatch, kFSEventStreamEventIdSinceNow, 1, kFSEventStreamCreateFlagWatchRoot ); FSEventStreamScheduleWithRunLoop(stream, CFRunLoopGetCurrent(), kCFRunLoopDefaultMode); FSEventStreamStart(stream); } call back function: static void feCallback(ConstFSEventStreamRef streamRef, void* pClientCallBackInfo, size_t numEvents, void* pEventPaths, const FSEventStreamEventFlags eventFlags[], const FSEventStreamEventId eventIds[]) {? char** ppPaths = (char**)pEventPaths; int i; for (i = 0; i < numEvents; i++) { NSLog(@"Event Flags %lu Event Id %llu", eventFlags[i], eventIds[i]); NSLog(@"Path changed: %@", [NSString stringWithUTF8String:ppPaths[i]]); } } Thanks a lot in advance.

    Read the article

  • PHP, MySQL - My own version of SALT (I call salty) - Login Issue

    - by Fabio Anselmo
    Ok I wrote my own version of SALT I call it salty lol don't make fun of me.. Anyway the registration part of my script as follows is working 100% correctly. //generate SALTY my own version of SALT and I likes me salt.. lol function rand_string( $length ) { $chars = "ABCDEFGHIJKLMNOPQRSTUWXYZabcdefghijklmnopqrstuwxyz1234567890"; $size = strlen( $chars ); for( $i = 0; $i < $length; $i++ ) { $str .= $chars[ rand( 0, $size - 1 ) ]; } return $str; } $salty = rand_string( 256 ); //generate my extra salty pw $password = crypt('password'); $hash = $password . $salty; $newpass = $hash; //insert the data in the database include ('../../scripts/dbconnect.php'); //Update db record with my salty pw ;) // TESTED WITH AND WITHOUT SALTY //HENCE $password and $newpass mysql_query("UPDATE `Register` SET `Password` = '$password' WHERE `emailinput` = '$email'"); mysql_close($connect); However my LOGIN script is failing. I have it setup to TEST and echo if its login or not. It always returns FAILED. I entered the DB and changed the crypted salty pw to "TEST" and I got a SUCCESS. So my problem is somewhere in this LOGIN script I assume. Now I am not sure how to implement my $Salty in this. But also be advised that even without SALTY (just using crypt to store my pass) - I was still unable to perform a login successfully. And if you're gonna suggest i use blowfish - note that my webhost doesn't have it supported and i don't know how to install it. here's my login script: if (isset($_POST['formsubmitted'])) { include ('../../scripts/dbconnect.php'); $username = mysql_real_escape_string($_POST['username']); $password = crypt(mysql_real_escape_string($_POST['password'])); $qry = "SELECT ID FROM Register WHERE emailinput='$username' AND Password='$password'"; $result = mysql_query($qry); if(mysql_num_rows($result) > 0) { echo 'SUCCESS'; //START SESSION } else { echo 'FAILED'; //YOU ARE NOT LOGGED IN } } So what's wrong with this login? Why isn't it working just using the crypt/storing only crypt? How can i make it work storing both the crypt and randomly generated SALTY :) ? Ty advance

    Read the article

  • Implementing events to communicate between two processes - C

    - by Jamie Keeling
    Hello all! I have an application consisting of two windows, one communicates to the other and sends it a struct constaining two integers (In this case two rolls of a dice). I will be using events for the following circumstances: Process a sends data to process b, process b displays data Process a closes, in turn closing process b Process b closes a, in turn closing process a I have noticed that if the second process is constantly waiting for the first process to send data then the program will be just sat waiting, which is where the idea of implementing threads on each process occurred and I have started to implement this already. The problem i'm having is that I don't exactly have a lot of experience with threads and events so I'm not sure of the best way to actually implement what I want to do. Following is a small snippet of what I have so far in the producer application; Create thread: case IDM_FILE_ROLLDICE: { hDiceRoll = CreateThread( NULL, // lpThreadAttributes (default) 0, // dwStackSize (default) ThreadFunc(hMainWindow), // lpStartAddress NULL, // lpParameter 0, // dwCreationFlags &hDiceID // lpThreadId (returned by function) ); } break; The data being sent to the other process: DWORD WINAPI ThreadFunc(LPVOID passedHandle) { HANDLE hMainHandle = *((HANDLE*)passedHandle); WCHAR buffer[256]; LPCTSTR pBuf; LPVOID lpMsgBuf; LPVOID lpDisplayBuf; struct diceData storage; HANDLE hMapFile; DWORD dw; //Roll dice and store results in variable storage = RollDice(); hMapFile = CreateFileMapping( (HANDLE)0xFFFFFFFF, // use paging file NULL, // default security PAGE_READWRITE, // read/write access 0, // maximum object size (high-order DWORD) BUF_SIZE, // maximum object size (low-order DWORD) szName); // name of mapping object if (hMapFile == NULL) { dw = GetLastError(); MessageBox(hMainHandle,L"Could not create file mapping object",L"Error",MB_OK); return 1; } pBuf = (LPTSTR) MapViewOfFile(hMapFile, // handle to map object FILE_MAP_ALL_ACCESS, // read/write permission 0, 0, BUF_SIZE); if (pBuf == NULL) { MessageBox(hMainHandle,L"Could not map view of file",L"Error",MB_OK); CloseHandle(hMapFile); return 1; } CopyMemory((PVOID)pBuf, &storage, (_tcslen(szMsg) * sizeof(TCHAR))); //_getch(); MessageBox(hMainHandle,L"Completed!",L"Success",MB_OK); UnmapViewOfFile(pBuf); return 0; } I'm trying to find out how I would integrate an event with the threaded code to signify to the other process that something has happened, I've seen an MSDN article on using events but it's just confused me if anything, I'm coming up on empty whilst searching on the internet too. Thanks for any help Edit: I can only use the Create/Set/Open methods for events, sorry for not mentioning it earlier.

    Read the article

  • Implementing Skip List in C++

    - by trikker
    [SOLVED] So I decided to try and create a sorted doubly linked skip list... I'm pretty sure I have a good grasp of how it works. When you insert x the program searches the base list for the appropriate place to put x (since it is sorted), (conceptually) flips a coin, and if the "coin" lands on a then that element is added to the list above it(or a new list is created with element in it), linked to the element below it, and the coin is flipped again, etc. If the "coin" lands on b at anytime then the insertion is over. You must also have a -infinite stored in every list as the starting point so that it isn't possible to insert a value that is less than the starting point (meaning that it could never be found.) To search for x, you start at the "top-left" (highest list lowest value) and "move right" to the next element. If the value is less than x than you continue to the next element, etc. until you have "gone too far" and the value is greater than x. In this case you go back to the last element and move down a level, continuing this chain until you either find x or x is never found. To delete x you simply search x and delete it every time it comes up in the lists. For now, I'm simply going to make a skip list that stores numbers. I don't think there is anything in the STL that can assist me, so I will need to create a class List that holds an integer value and has member functions, search, delete, and insert. The problem I'm having is dealing with links. I'm pretty sure I could create a class to handle the "horizontal" links with a pointer to the previous element and the element in front, but I'm not sure how to deal with the "vertical" links (point to corresponding element in other list?) If any of my logic is flawed please tell me, but my main questions are: How to deal with vertical links and whether my link idea is correct Now that I read my class List idea I'm thinking that a List should hold a vector of integers rather than a single integer. In fact I'm pretty positive, but would just like some validation. I'm assuming the coin flip would simply call int function where rand()%2 returns a value of 0 or 1 and if it's 0 then a the value "levels up" and if it's 0 then the insert is over. Is this incorrect? How to store a value similar to -infinite? Edit: I've started writing some code and am considering how to handle the List constructor....I'm guessing that on its construction, the "-infinite" value should be stored in the vectorname[0] element and I can just call insert on it after its creation to put the x in the appropriate place.

    Read the article

  • printf anomaly after "fork()"

    - by pechenie
    OS: Linux, Language: pure C I'm moving forward in learning C progpramming in general, and C programming under UNIX in a special case :D So, I detected a strange (as for me) behaviour of the printf() function after using a fork() call. Let's take a look at simple test program: #include <stdio.h> #include <system.h> int main() { int pid; printf( "Hello, my pid is %d", getpid() ); pid = fork(); if( pid == 0 ) { printf( "\nI was forked! :D" ); sleep( 3 ); } else { waitpid( pid, NULL, 0 ); printf( "\n%d was forked!", pid ); } return 0; } In this case the output looks like: Hello, my pid is 1111 I was forked! :DHello, my pid is 1111 2222 was forked! Why the second "Hello" string occured in the child's output? Yes, it is exactly what the parent printed on it's start, with the parent's pid. But! If we place '\n' character in the end of each string we got the expected output: #include <stdio.h> #include <system.h> int main() { int pid; printf( "Hello, my pid is %d\n", getpid() ); // SIC!! pid = fork(); if( pid == 0 ) { printf( "I was forked! :D" ); //removed the '\n', no matter sleep( 3 ); } else { waitpid( pid, NULL, 0 ); printf( "\n%d was forked!", pid ); } return 0; } And the output looks like: Hello, my pid is 1111 I was forked! :D 2222 was forked! Why does it happen? Is it ... ummm ... correct behaviour? Or it's a kind of the 'bug'?

    Read the article

  • Loading the last related record instantly for multiple parent records using Entity framework

    - by Guillaume Schuermans
    Does anyone know a good approach using Entity Framework for the problem described below? I am trying for our next release to come up with a performant way to show the placed orders for the logged on customer. Of course paging is always a good technique to use when a lot of data is available I would like to see an answer without any paging techniques. Here's the story: a customer places an order which gets an orderstatus = PENDING. Depending on some strategy we move that order up the chain in order to get it APPROVED. Every change of status is logged so we can see a trace for statusses and maybe even an extra line of comment per status which can provide some extra valuable information to whoever sees this order in an interface. So an Order is linked to a Customer. One order can have multiple orderstatusses stored in OrderStatusHistory. In my testscenario I am using a customer which has 100+ Orders each with about 5 records in the OrderStatusHistory-table. I would for now like to see all orders in one page not using paging where for each Order I show the last relevant Status and the extra comment (if there is any for this last status; both fields coming from OrderStatusHistory; the record with the highest Id for the given OrderId). There are multiple scenarios I have tried, but I would like to see any potential other solutions or comments on the things I have already tried. Trying to do Include() when getting Orders but this still results in multiple queries launched on the database. Each order triggers an extra query to the database to get all orderstatusses in the history table. So all statusses are queried here instead of just returning the last relevant one, plus 100 extra queries are launched for 100 orders. You can imagine the problem when there are 100000+ orders in the database. Having 2 computed columns on the database: LastStatus, LastStatusInformation and a regular Linq-Query which gets those columns which are available through the Entity-model. The problem with this approach is the fact that those computed columns are determined using a scalar function which can not be changed without removing the formula from the computed column, etc... In the end I am very familiar with SQL and Stored procedures, but since the rest of the data-layer uses Entity Framework I would like to stick to it as long as possible, even though I have my doubts about performance. Using the SQL approach I would write something like this: WITH cte (RN, OrderId, [Status], Information) AS ( SELECT ROW_NUMBER() OVER (PARTITION BY OrderId ORDER BY Id DESC), OrderId, [Status], Information FROM OrderStatus ) SELECT o.Id, cte.[Status], cte.Information AS StatusInformation, o.* FROM [Order] o INNER JOIN cte ON o.Id = cte.OrderId AND cte.RN = 1 WHERE CustomerId = @CustomerId ORDER BY 1 DESC; which returns all orders for the customer with the statusinformation provided by the Common Table Expression. Does anyone know a good approach using Entity Framework?

    Read the article

  • Expand and overlap image over a grid of other images

    - by soren121
    I've been fighting with jQuery all night and getting quite frustrated here, so forgive me if the answer was staring me in the face. I have a grid of 15 images contained within a <div>, and when I click on one of them, I want it to expand to three times its original size of 150x105 and overlap the rest. I've got the expanding down, but the overlapping isn't quite working. My current HTML: <div id="image-grid"> <img src="images/after-pictures/1.jpg" class="igc1" /> <img src="images/after-pictures/2.jpg" class="igc2" /> <img src="images/after-pictures/3.jpg" class="igc3" /> <img src="images/after-pictures/4.jpg" class="igc4" /> <img src="images/after-pictures/5.jpg" class="igc5" /> <img src="images/after-pictures/6.jpg" class="igc1" /> <img src="images/after-pictures/7.jpg" class="igc2" /> <img src="images/after-pictures/8.jpg" class="igc3" /> <img src="images/after-pictures/9.jpg" class="igc4" /> <img src="images/after-pictures/10.jpg" class="igc5" /> <img src="images/after-pictures/11.jpg" class="igc1" /> <img src="images/after-pictures/12.jpg" class="igc2" /> <img src="images/after-pictures/13.jpg" class="igc3" /> <img src="images/after-pictures/14.jpg" class="igc4" /> <img src="images/after-pictures/15.jpg" class="igc5" /> </div> The igc* class denotes the column the image is in. CSS: #image-grid { border: 1px solid #aaa; width: 745px; padding: 5px 2px 2px 5px; } #image-grid img { width: 150px; height: 105px; margin: -2px; } jQuery: $('#image-grid img').click(function() { $(this).animate({ width: '450px', height: '315px', zIndex: '10' }, 200); });

    Read the article

  • Monitoring UDP socket in glib(mm) eats up CPU time

    - by Gyorgy Szekely
    Hi, I have a GTKmm Windows application (built with MinGW) that receives UDP packets (no sending). The socket is native winsock and I use glibmm IOChannel to connect it to the application main loop. The socket is read with recvfrom. My problem is: this setup eats 25% percent CPU time on a 3GHz workstation. Can somebody tell me why? The application is idle in this case, and if I remove the UDP code, CPU usage drops down to almost zero. As the application has to perform some CPU intensive tasks, I could image better ways to spend that 25% Here are some code excerpts: (sorry for the printf's ;) ) /* bind */ void UDPInterface::bindToPort(unsigned short port) { struct sockaddr_in target; WSADATA wsaData; target.sin_family = AF_INET; target.sin_port = htons(port); target.sin_addr.s_addr = 0; if ( WSAStartup ( 0x0202, &wsaData ) ) { printf("WSAStartup failed!\n"); exit(0); // :) WSACleanup(); } sock = socket( AF_INET, SOCK_DGRAM, 0 ); if (sock == INVALID_SOCKET) { printf("invalid socket!\n"); exit(0); } if (bind(sock,(struct sockaddr*) &target, sizeof(struct sockaddr_in) ) == SOCKET_ERROR) { printf("failed to bind to port!\n"); exit(0); } printf("[UDPInterface::bindToPort] listening on port %i\n", port); } /* read */ bool UDPInterface::UDPEvent(Glib::IOCondition io_condition) { recvfrom(sock, (char*)buf, BUF_SIZE*4, 0, NULL, NULL); /* process packet... */ } /* glibmm connect */ Glib::RefPtr channel = Glib::IOChannel::create_from_win32_socket(udp.sock); Glib::signal_io().connect( sigc::mem_fun(udp, &UDPInterface::UDPEvent), channel, Glib::IO_IN ); I've read here in some other question, and also in glib docs (g_io_channel_win32_new_socket()) that the socket is put into nonblocking mode, and it's "a side-effect of the implementation and unavoidable". Does this explain the CPU effect, it's not clear to me? Whether or not I use glib to access the socket or call recvfrom() directly doesn't seem to make much difference, since CPU is used up before any packet arrives and the read handler gets invoked. Also glibmm docs state that it's ok to call recvfrom() even if the socket is polled (Glib::IOChannel::create_from_win32_socket()) I've tried compiling the program with -pg and created a per function cpu usage report with gprof. This wasn't usefull because the time is not spent in my program, but in some external glib/glibmm dll.

    Read the article

  • Cakephp file upload problem.

    - by vatismarty
    I am using Cakephp as my framework. I have a problem in uploading my files through a form. I am using an Uploader plugin from THIS website. My php ini file has this piece of code. upload_max_filesize = 10M post_max_size = 8M this is from uploader.php -- plugin file has var $maxFileSize = '5M'; //default max file size In my controller.php file, i use this code to set max file size as 1 MB at runtime. function beforeFilter() { parent::beforeFilter(); $this->Uploader->maxFileSize = '1M'; } In the uploader.php, we perform this ... if (empty($this->maxFileSize)) { $this->maxFileSize = ini_get('upload_max_filesize'); //landmark 1 } $byte = preg_replace('/[^0-9]/i', '', $this->maxFileSize); $last = $this->bytes($this->maxFileSize, 'byte'); if ($last == 'T' || $last == 'TB') { $multiplier = 1; $execTime = 20; } else if ($last == 'G' || $last == 'GB') { $multiplier = 3; $execTime = 10; } else if ($last == 'M' || $last == 'MB') { $multiplier = 5; $execTime = 5; } else { $multiplier = 10; $execTime = 3; } ini_set('memore_limit', (($byte * $multiplier) * $multiplier) . $last); ini_set('post_max_size', ($byte * $multiplier) . $last); //error suspected here ini_set('upload_tmp_dir', $this->tempDir); ini_set('upload_max_filesize', $this->maxFileSize); //landmark 2 EXPECTED RESULT: When i try uploading a file that is 2MB of size, it shouldn't take place because maxFileSize is 1MB at run time. So upload should fail. THE PROBLEM IS : But it is getting uploaded. Landmark 1 does not get executed. (in comments)... land mark 2 does not seem to work... upload_max_filesize does not get the value from maxFileSize. Please help me... thank you

    Read the article

  • how to send put request with data as an xml element, from JavaScript ?

    - by Sarang
    Hi everyone, My data is an xml element & I want send PUT request with JavaScript. How do I do this ? For reference : Update Cell As per fredrik suggested, I did this : function submit(){ var xml = "<entry>" + "<id>https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/od6/private/full/R2C1</id>" + "<link rel=\"edit\" type=\"application/atom+xml\"" + "href=\"https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/worksheetId/private/full/R2C1\"/>" + "<gs:cell row=\"2\" col=\"1\" inputValue=\"300\"/>" + "</entry>"; document.getElementById('submitForm').submit(xml); } </script> </head> <body> <form id="submitForm" method="put" action="https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/od6/private/full/R2C1"> <input type="submit" value="submit" onclick="submit()"/> </form> However, it doesn't write back but positively it returns xml file like : <?xml version='1.0' encoding='UTF-8'?> <entry xmlns='http://www.w3.org/2005/Atom' xmlns:gs='http://schemas.google.com/spreadsheets/2006' xmlns:batch='http://schemas.google.com/gdata/batch'> <id>https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/od6/private/full/R2C1</id> <updated>2011-01-11T07:35:09.767Z</updated> <category scheme='http://schemas.google.com/spreadsheets/2006' term='http://schemas.google.com/spreadsheets/2006#cell'/> <title type='text'>A2</title> <content type='text'></content> <link rel='self' type='application/atom+xml' href='https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/od6/private/full/R2C1'/> <link rel='edit' type='application/atom+xml' href='https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/od6/private/full/R2C1/1ekg'/> <gs:cell row='2' col='1' inputValue=''></gs:cell> </entry> Any further solution for the same ?

    Read the article

  • Quick question regarding this issue, Why doesnt it print out the second value(converted second value

    - by sil3nt
    Quick question, What have I done wrong here. The purpose of this code is to get the input into a string, the input being "12 34", with a space in between the "12" and "32" and to convert and print the two separate numbers from an integer variable known as number. Why doesn't the second call to the function copyTemp, not produce the value 34?. I have an index_counter variable which keeps track of the string index and its meant to skip the 'space' character?? what have i done wrong? thanks. #include <stdio.h> #include <string.h> int index_counter = 0; int number; void copyTemp(char *expr,char *temp); int main(){ char exprstn[80]; //as global? char tempstr[80]; gets(exprstn); copyTemp(exprstn,tempstr); printf("Expression: %s\n",exprstn); printf("Temporary: %s\n",tempstr); printf("number is: %d\n",number); copyTemp(exprstn,tempstr); //second call produces same output shouldnt it now produce 34 in the variable number? printf("Expression: %s\n",exprstn); printf("Temporary: %s\n",tempstr); printf("number is: %d\n",number); return 0; } void copyTemp(char *expr,char *temp){ int i; for(i = index_counter; expr[i] != '\0'; i++){ if (expr[i] == '0'){ temp[i] = expr[i]; } if (expr[i] == '1'){ temp[i] = expr[i]; } if (expr[i] == '2'){ temp[i] = expr[i]; } if (expr[i] == '3'){ temp[i] = expr[i]; } if (expr[i] == '4'){ temp[i] = expr[i]; } if (expr[i] == '5'){ temp[i] = expr[i]; } if (expr[i] == '6'){ temp[i] = expr[i]; } if (expr[i] == '7'){ temp[i] = expr[i]; } if (expr[i] == '8'){ temp[i] = expr[i]; } if (expr[i] == '9'){ temp[i] = expr[i]; } if (expr[i] == ' '){ temp[i] = '\0'; sscanf(temp,"%d",&number); index_counter = i+1; //skips? } } // is this included here? temp[i] = '\0'; }

    Read the article

  • Converting Multiple files to zip and saving them in ownCloud

    - by user1055380
    I wanted to convert an array with some css, js and html files into a zip file and save them in ownCloud (it has it's own framework but it's knowledge is not required.) What I am saving is an infinite loop of zip files, as in, a zip inside a zip so I can't even check that the code is working correctly or not. Please help. Here is the link to the code. <?php /* creates a compressed zip file */ $filename = $_GET["filename"]; function create_zip($files = array(),$destination = '',$overwrite = false) { //if the zip file already exists and overwrite is false, return false if(file_exists($destination) && !$overwrite) { return false; } //vars $valid_files = array(); //if files were passed in... if(is_array($files)) { //cycle through each file foreach($files as $file => $local) { //make sure the file exists if(file_exists($file)) { $valid_files[$file] = $local; } } } //if we have good files... if(count($valid_files)) { //create the archive $zip = new ZipArchive(); if($zip->open($destination,$overwrite ? ZIPARCHIVE::OVERWRITE : ZIPARCHIVE::CREATE) !== true) { return false; } //add the files foreach($valid_files as $file => $local) { $zip->addFile($file, $local); } //debug //echo 'The zip archive contains ',$zip->numFiles,' files with a status of ',$zip->status; //close the zip -- done! $zip->close(); //check to make sure the file exists return file_exists($destination); } else { return false; } } $files_to_zip = array( 'apps/impressionist/css/mappingstyle.css' => '/css/mappingstyle.css', 'apps/impressionist/css/style.css' => '/css/style.css', 'apps/impressionist/js/jquery.js' => '/scripts/jquery.js', 'apps/impressionist/js/impress.js' => '/scripts/impress.js', realpath('apps/impressionist/output/'.$filename.'.html') => $filename.'.html' ); //if true, good; if false, zip creation failed $result = create_zip($files_to_zip, $filename.'.zip'); $save_file = OC_App::getStorage('impressionist'); $save_file ->file_put_contents($filename.'.zip',$files_to_zip); ?>

    Read the article

  • How to overwrite an array of char pointers with a larger list of char pointers?

    - by Casey
    My function is being passed a struct containing, among other things, a NULL terminated array of pointers to words making up a command with arguments. I'm performing a glob match on the list of arguments, to expand them into a full list of files, then I want to replace the passed argument array with the new expanded one. The globbing is working fine, that is, g.gl_pathv is populated with the list of expected files. However, I am having trouble copying this array into the struct I was given. #include <glob.h> struct command { char **argv; // other fields... } void myFunction( struct command * cmd ) { char **p = cmd->argv; char* program = *p++; // save the program name (e.g 'ls', and increment to the first argument glob_t g; memset(&g, 0, sizeof(g)); g.gl_offs = 1; int res = glob(*p++, GLOB_DOOFFS, NULL, &g); glob_handle_res(res); while (*p) { res = glob(*p, GLOB_DOOFFS | GLOB_APPEND, NULL, &g); glob_handle_res(res); } if( g.gl_pathc <= 0 ) { globfree(&g); } cmd->argv = malloc((g.gl_pathc + g.gl_offs) * sizeof *cmd->argv); if (cmd->argv == NULL) { sys_fatal_error("pattern_expand: malloc failed\n");} // copy over the arguments size_t i = g.gl_offs; for (; i < g.gl_pathc + g.gl_offs; ++i) cmd->argv[i] = strdup(g.gl_pathv[i]); // insert the original program name cmd->argv[0] = strdup(program); ** cmd->argv[g.gl_pathc + g.gl_offs] = 0; ** globfree(&g); } void command_free(struct esh_command * cmd) { char ** p = cmd->argv; while (*p) { free(*p++); // Segfaults here, was it already freed? } free(cmd->argv); free(cmd); } Edit 1: Also, I realized I need to stick program back in there as cmd-argv[0] Edit 2: Added call to calloc Edit 3: Edit mem management with tips from Alok Edit 4: More tips from alok Edit 5: Almost working.. the app segfaults when freeing the command struct Finally: Seems like I was missing the terminating NULL, so adding the line: cmd->argv[g.gl_pathc + g.gl_offs] = 0; seemed to make it work.

    Read the article

  • angular-ui-router : breadcrumps ok but view ko

    - by anakin59490
    this is my app.router.js : agentRouter.config([ '$stateProvider', '$urlRouterProvider', function($stateProvider, $urlRouterProvider) { var root = { name: 'root', abstract: true, url: '', title: 'home', views: { 'header': { templateUrl: 'views/headers/header.app.html', controller: 'HeaderCtrl' }, 'body': { templateUrl: "views/root.html" }, 'footer': { templateUrl: 'views/footers/footer.app.html' } } }; var agent = { name: 'root.agent', url: '/agent', title: 'agent', views: { 'root.sidebar': { templateUrl: "views/main.sidebar.html" }, 'root.container': { templateUrl: "views/partials/agent/list.container.html" } } }; var detail = { name: 'root.agent.detail', url: '/detail/:id', title: 'agentDetail', // use for breadcrumb views: { 'root.sidebar': { templateUrl: "views/main.sidebar.html" }, 'root.container': { templateUrl: "views/partials/agent/list.chantier.html" } } }; /.../ $stateProvider.state(root); $stateProvider.state(agent); $stateProvider.state(detail); } ]); and this is my root.html : <!--Breadcrumb content--> <ul class="row breadcrumb"> <i class="glyphicon glyphicon-home" style=""></i> <li ng-repeat="state in $state.$current.path"> <a ng-href="#{{state.url.format($stateParams)}}"><span ng-bind="state.title"></span></a> <span ng-hide="$last" class=""></span> </li> </ul> <!--Sidebar content--> <div ui-view="root.sidebar">default root.sidebar</div> <!--Container content--> <div style="background-color: #f9f9f9" ui-view="root.container">default root.container</div> I can access to my "agent" page (a list of person) and my breadcrumb is right : home / agent but when i click on an item of the list i got always the same page but my breadcrumb is right : home / agent / agentDetail but in app.router.js if change detail like this : var detail = { name: 'root.detail', // référence initiale + detail (fils) url: '/agent/detail/:id', // réference utilisée dans les fichiers HTML, attention c'est la suite de l'url précédente!!! title: 'agentDetail', // référence utilisée pour le breadcump views: { 'root.sidebar': { templateUrl: "views/main.sidebar.html" }, 'root.container': { templateUrl: "views/partials/agent/list.chantier.html" } } }; i got the right page (list.chantier.xml) but the breadcrumb is false : home / agentDetail instead of home / agent / agentDetail I would like to got the right breadcrumb (home / agent / agentDetail) with the right page (list.chantier.html) when i click on an item of the agent list page (list.container.html) Thank you in advance for your help

    Read the article

  • How to properly preload images, js and css files?

    - by Kenny Bones
    Hi, I'm creating a website from scratch and I was really into this in the late 90's but the web has changed alot since then! And I'm more of a designer so when I started putting this site together, I basically did a system of php includes to make the site more "dynamic" When you first visit the site, you'll be presented to a logon screen, if you're not already logged on (cookies). If you're not logged on, a page called access.php is introdused. I thought I'd preload the most heavy images at this point. So that when the user is done logging on, the images are already cached. And this is working as I want. But I still notice that the biggest image still isn't rendered immediatly anyway. So it's seems kinda pointless. All of this has made me rethink how the site is structured and how scripts and css files are loaded. Using FireBug and YSlow with Firefox I see a few pointers like expires headers and reducing the size of each script. But is this really the culprit? For example, would this be really really stupid in the main index.php? The entire site is basically structured like this <?php require("dbconnect.php"); ?> <?php include ("head.php"); ?> And below this is basically just the body and the content of the site. Head.php however consists of the doctype, head portions, linking of two css style sheets, jQuery library, jQuery validation engine, Cufon and Cufon font file, and then the small Cufon.Replace snippet. The rest of the body comes with the index.php file, but at the bottom of this again is an include of a file called "footer.php" which basically consists of loading of a couple of jsLoader scripts and a slidepanel and then a js function. All of this makes the end page source look like a typical complete webpage, but I'm wondering if any of you can see immediatly that "this is really really stupid" and "don't do that, do this instead" etc. :) Are includes a bad way to go? This site is also pretty image intensive and I can probably do a little more optimization. But I don't think that's its the primary culprit. YSlow gives me a report of what takes up the most space: doc(1) - 5.8K js(5) - 198.7K css(2) - 5.6K cssimage(8) - 634.7K image(6) - 110.8K I know it looks like it's cssimage(8) that weighs the most, but I've already preloaded these images from before and it doesn't really affect the rendering.

    Read the article

  • C to C++ Conversion [closed]

    - by Annalyne
    Can someone convert this code to C++, pretty please? :( #include <stdio.h> #include <stdlib.h> #include <time.h> #define WEAPON_ROPE 10 #define WEAPON_REVOLVER 20 #define WEAPON_LEADPIPE 30 #define WEAPON_CANDLESTICK 40 #define WEAPON_KNIFE 50 #define WEAPON_WRENCH 60 #define PEOPLE_MRGREEN 100 #define PEOPLE_MSSCARLET 200 #define PEOPLE_CONLMUSTARD 300 #define PEOPLE_PROFPLUM 400 #define PEOPLE_MISPEACOCK 500 #define PEOPLE_MISWHITE 600 #define PLACE_KITCHEN 1 #define PLACE_HALL 2 #define PLACE_POOLROOM 3 #define PLACE_STUDY 4 #define PLACE_LOUNG 5 #define PLACE_LIBRARY 6 #define PLACE_CONSERVATORY 7 #define PLACE_DINING 8 #define PLACE_BILLIARDS 9 int main() { int die = 0; int players[6][9] = {{0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}}; int allCards[] = {WEAPON_ROPE, WEAPON_REVOLVER, WEAPON_LEADPIPE, WEAPON_CANDLESTICK, WEAPON_CANDLESTICK, WEAPON_KNIFE, WEAPON_WRENCH, PEOPLE_MRGREEN, PEOPLE_MSSCARLET, PEOPLE_CONLMUSTARD, PEOPLE_CONLMUSTARD, PEOPLE_PROFPLUM, PEOPLE_MISPEACOCK, PEOPLE_MISWHITE, PLACE_KITCHEN, PLACE_HALL, PLACE_POOLROOM, PLACE_STUDY, PLACE_LOUNG, PLACE_LIBRARY, PLACE_CONSERVATORY, PLACE_DINING, PLACE_BILLIARDS}; int deckSize = 23; // number of cards in allCards array int count; for (count = 0; count < deckSize; ++count) { printf(", %d", allCards[count]); } // End for // These three array's are so you can put a card back, if need be... int weaponCards[] = {WEAPON_ROPE, WEAPON_REVOLVER, WEAPON_LEADPIPE, WEAPON_CANDLESTICK, WEAPON_CANDLESTICK, WEAPON_KNIFE, WEAPON_WRENCH}; int weaponDeckSize = 7; int peopleCards[] = {PEOPLE_MRGREEN, PEOPLE_MSSCARLET, PEOPLE_CONLMUSTARD, PEOPLE_CONLMUSTARD, PEOPLE_PROFPLUM, PEOPLE_MISPEACOCK, PEOPLE_MISWHITE}; int peopleDeckSize = 7; int placeCards[] = {PLACE_KITCHEN, PLACE_HALL, PLACE_POOLROOM, PLACE_STUDY, PLACE_LOUNG, PLACE_LIBRARY, PLACE_CONSERVATORY, PLACE_DINING, PLACE_BILLIARDS}; int placeDeckSize = 9; srand(clock()); // seed rand() using clock() which gives // the current tick your processor is at... int killer[3]; // no need to initialize yet. killer[0-2] will initialize int deckShuffle = rand() % weaponDeckSize; // picks one number out of the deck killer[0] = weaponCards[deckShuffle]; allCards[deckShuffle] = 0; // Card drawn. No longer exists in deck deckShuffle = rand() % peopleDeckSize; // picks another random card out of the deck killer[1] = peopleCards[deckShuffle]; allCards[deckShuffle + weaponDeckSize] = 0; // Card drawn. No longer exists in deck deckShuffle = rand() % placeDeckSize; // randomly picks the last card needed killer[2] = placeCards[deckShuffle]; allCards[deckShuffle + weaponDeckSize + peopleDeckSize] = 0; // Card drawn. No longer exists in deck int numberOfCards = 0; printf("CLUE\n"); printf("written by John Schintone\n"); printf("Origonal game delvoped by Hasbro\n"); int numberOfPlayers = 0; while ((numberOfPlayers < 3) || (numberOfPlayers > 6)) { printf("How many players are Going to play :\n"); printf("[number] > "); scanf("%d",&numberOfPlayers); // A very fast if statement which only uses integers/char's switch(numberOfPlayers) { case 6: { numberOfCards = 3; } break; case 5: { numberOfCards = 4; } break; case 4: { numberOfCards = 5; } break; case 3: { numberOfCards = 6; } break; default: { printf("You must enter a number between 3 and 6...\n"); } // End default } // End switch } // End while int index1, index2; // Note: ++index1; is faster than index1++; and will almost always // produce better code (index1++ happens after this statement line. // ++index1 increments index1 before this statement line) for (index1 = 0; index1 < numberOfPlayers; ++index1) { printf("Player %d", index1); for (index2 = 0; index2 < numberOfCards; ++index2) { // Remember that allCards[deckShuffle] == 0 because we removed that // card ages ago... works out well, just don't forget you did that : ) while (allCards[deckShuffle] == 0) { deckShuffle = rand() % deckSize; } // End while players[index1][index2] = allCards[deckShuffle]; allCards[deckShuffle] = 0; // Card removed for after loop... printf(", %d", players[index1][index2]); switch(players[index1][index2]) { case WEAPON_ROPE: { } break; // Add more... case PEOPLE_MRGREEN: { } break; // Add more... case PLACE_KITCHEN: { } break; // Add more... default: { printf("Program has caught player %d cheating...", index1); } // End default } // End switch } // End for printf("\n"); } // End for printf("The killer is %d, with the %d, and in the %d \n\n", killer[0], killer[1], killer[2]); printf("Type h for this help... \n"); printf("Type e to escape... \n"); printf("Type r to roll the die... \n"); char command = '\0'; // \0 represents zero, or the null character while (command != 'e') { printf("[one character] > "); scanf("%c", &command); if (command == 'r') { die = rand() % 6 + 1; printf("Your number is: %d \n", die); } // end while if (command == 'h') { printf("Type h for this help... \n"); printf("Type e to escape... \n"); printf("Type r to roll the die... \n"); } // End if printf("\n"); } // End while return(0); // Success. Program worked ok } // End main() Function

    Read the article

< Previous Page | 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464  | Next Page >