Search Results

Search found 12730 results on 510 pages for 'trusted root'.

Page 147/510 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >

• Device being used by VxVM

  - by Onur Bingul

  If you are using vxvm, you may have issues when you try to unconfigure a disk root@techsupport2 # cfgadm -c unconfigure c1::dsk/c1t3d0cfgadm: Component system is busy, try again: failed to offline:     Resource             Information       ----------------       -------------------------/dev/dsk/c1t3d0   Device being used by VxVM“cfgadm unconfigure” command fails here.The way to resolve this is to disable the disks path from DMP control. Since there is only one path to this disk, the “-f” (for force) option needs to be used:root@techsupport2 # vxdmpadm -f disable path=c1t3d0s2root@techsupport2 # vxdmpadm getsubpaths NAME         STATE[A]   PATH-TYPE[M] DMPNODENAME  ENCLR-NAME   CTLR   ATTRS================================================================================c1t6d0       ENABLED(A)   -          disk_0       disk         c1       -c1t3d0       DISABLED(M)   -          disk_1       disk         c1       -c1t0d0s2     ENABLED(A)   -          disk_2       disk         c1       -c1t1d0       ENABLED(A)   -          disk_3       disk         c1       -c3t47d0      ENABLED(A)   -          sun35100_0   sun35100     c3       -c3t47d1      ENABLED(A)   -          sun35100_1   sun35100     c3       -c3t47d2s2    ENABLED(A)   -          sun35100_2   sun35100     c3       -c3t47d3s2    ENABLED(A)   -          sun35100_3   sun35100     c3       -You can see the path now disabled from DMP.root@techsupport2 # cfgadm -c unconfigure c1::dsk/c1t3d0Now you can unconfigure the disk

  Read the article

• SQL SERVER – Understanding XML – Contest Win Joes 2 Pros Combo (USD 198) – Day 5 of 5

  - by pinaldave

  August 2011 we ran a contest where every day we give away one book for an entire month. The contest had extreme success. Lots of people participated and lots of give away. I have received lots of questions if we are doing something similar this month. Absolutely, instead of running a contest a month long we are doing something more interesting. We are giving away USD 198 worth gift every day for this week. We are giving away Joes 2 Pros 5 Volumes (BOOK) SQL 2008 Development Certification Training Kit every day. One copy in India and One in USA. Total 2 of the giveaway (worth USD 198). All the gifts are sponsored from the Koenig Training Solution and Joes 2 Pros. The books are available here Amazon | Flipkart | Indiaplaza How to Win: Read the Question Read the Hints Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India residents only) 2 Winners will be randomly selected announced on August 20th. Question of the Day: Is following XML a well formed XML Document? <?xml version=”1.0″?> <address> <firstname>Pinal</firstname> <lastname>Dave</lastname> <title>Founder</title> <company>SQLAuthority.com</company> </address> a) Yes b) No c) I do not know Query Hints: BIG HINT POST A common observation by people seeing an XML file for the first time is that it looks like just a bunch of data inside a text file. XML files are text-based documents, which makes them easy to read.  All of the data is literally spelled out in the document and relies on a just a few characters (<, >, =) to convey relationships and structure of the data.  XML files can be used by any commonly available text editor, like Notepad. Much like a book’s Table of Contents, your first glance at well-formed XML will tell you the subject matter of the data and its general structure. Hints appearing within the data help you to quickly identify the main theme (similar to book’s subject), its headers (similar to chapter titles or sections of a book), data elements (similar to a book’s characters or chief topics), and so forth. We’ll learn to recognize and use the structural “hints,” which are XML’s markup components (e.g., XML tags, root elements). The XML Raw and Auto modes are great for displaying data as all attributes or all elements – but not both at once. If you want your XML stream to have some of its data shown in attributes and some shown as elements, then you can use the XML Path mode. If you are using an XML Path stream, then by default all values will be shown as elements. However, it is possible to pick one or more elements to be shown with an attribute(s) as well. Additional Hints: I have previously discussed various concepts from SQL Server Joes 2 Pros Volume 5. SQL Joes 2 Pros Development Series – OpenXML Options SQL Joes 2 Pros Development Series – Preparing XML in Memory SQL Joes 2 Pros Development Series – Shredding XML SQL Joes 2 Pros Development Series – Using Root With Auto XML Mode SQL Joes 2 Pros Development Series – Using Root With Auto XML Mode SQL Joes 2 Pros Development Series – What is XML? SQL Joes 2 Pros Development Series – What is XML? – 2 Next Step: Answer the Quiz in Contact Form in following format Question - Answer Name of the country (The contest is open for USA and India) Bonus Winner Leave a comment with your favorite article from the “additional hints” section and you may be eligible for surprise gift. There is no country restriction for this Bonus Contest. Do mention why you liked it any particular blog post and I will announce the winner of the same along with the main contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Assign highest priority to my local repository

  - by Anwar Shah

  Original question was : "How to assign highest priority to local repository without using sources.list file" I have setup a local repository with packages I downloaded. I use it to avoid downloading the same packages over the Internet, when I need to reinstall my Ubuntu. It is a basic repository, created with apt-ftparchive packages . > Packages. I made this a trusted repository to avoid "unauthenticated repository" warning. (When you have a untrusted repository, apt or synaptic try to download the same packages over the Internet, 'cause it is trusted). I have been using this local repository for at least 1 years. But I have to always put my local repository line at the top of the sources.list file to use this. But this is annoying, since I must open a terminal and do some typing on it every time I reinstall Ubuntu, though there is a better tool software-properties-gtk. I cannot use this tool since it place the source line at the end of `sources.list. And the real problem is that, the apt or synaptic always download a package from the source which is mentioned earlier, without inspecting whether the packages are already available in the local repository. So, I have no choice but to place the local source at the top of sources.list doing terminal (I actually don't hate terminal, but I need a solution) . I have tried this method. But this does not help me. My preference file is this in /etc/apt/preferences.d/local-pin-900 Package: * Pin: release o=Local,n=ubuntu-local Pin-Priority: 900 My release file is this Origin: Local Label: Local-Ubuntu Description: Local Ubuntu Repository Codename: ubuntu-local MD5Sum: ed43222856d18f389c637ac3d7dd6f85 1043412 Packages d41d8cd98f00b204e9800998ecf8427e 0 Sources When I enable the apt-preference, the apt-cache policy correctly shows the preference, e.g. It shows the local repository has the highest priority. But when I do this sudo apt-get install <package-name>, apt tries to download it from Internet. But when I place my local-repo at the top, it installs from local repository. So, My question is - 'Is it possible to force apt to use local repository when the package is available in local repository, without explicitly placing "the local source" at the top of my repository list (e.g sources.list file) ?' Edit: output of apt-cache policy $package_name is as follows nautilus-wipe: Installed: (none) Candidate: 0.1.1-2 Version table: 0.1.1-2 0 500 http://archive.ubuntu.com/ubuntu/ precise/universe i386 Packages 900 file:/media/Main/Linux-Software/Ubuntu/Precise/ Packages It is showing that my local repository has higher preference, though it is not the one which comes first in sources.list file. Here is the output of apt-get install nautilus-wipe Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: nautilus-wipe 0 upgraded, 1 newly installed, 0 to remove and 131 not upgraded. Need to get 30.7 kB of archives. After this operation, 150 kB of additional disk space will be used. 'http://archive.ubuntu.com/ubuntu/pool/universe/n/nautilus-wipe/nautilus-wipe_0.1.1-2_i386.deb' nautilus-wipe_0.1.1-2_i386.deb 30730 MD5Sum:7d497b8dfcefe1c0b51a45f3b0466994 It is still trying to get the file from Internet, though I think it should be happy with the local one.

  Read the article

• Oracle Data Integration 12c: Simplified, Future-Ready, High-Performance Solutions

  - by Thanos Terentes Printzios

  In today’s data-driven business environment, organizations need to cost-effectively manage the ever-growing streams of information originating both inside and outside the firewall and address emerging deployment styles like cloud, big data analytics, and real-time replication. Oracle Data Integration delivers pervasive and continuous access to timely and trusted data across heterogeneous systems. Oracle is enhancing its data integration offering announcing the general availability of 12c release for the key data integration products: Oracle Data Integrator 12c and Oracle GoldenGate 12c, delivering Simplified and High-Performance Solutions for Cloud, Big Data Analytics, and Real-Time Replication. The new release delivers extreme performance, increase IT productivity, and simplify deployment, while helping IT organizations to keep pace with new data-oriented technology trends including cloud computing, big data analytics, real-time business intelligence. With the 12c release Oracle becomes the new leader in the data integration and replication technologies as no other vendor offers such a complete set of data integration capabilities for pervasive, continuous access to trusted data across Oracle platforms as well as third-party systems and applications. Oracle Data Integration 12c release addresses data-driven organizations’ critical and evolving data integration requirements under 3 key themes: Future-Ready Solutions : Supporting Current and Emerging Initiatives Extreme Performance : Even higher performance than ever before Fast Time-to-Value : Higher IT Productivity and Simplified Solutions  With the new capabilities in Oracle Data Integrator 12c, customers can benefit from: Superior developer productivity, ease of use, and rapid time-to-market with the new flow-based mapping model, reusable mappings, and step-by-step debugger. Increased performance when executing data integration processes due to improved parallelism. Improved productivity and monitoring via tighter integration with Oracle GoldenGate 12c and Oracle Enterprise Manager 12c. Improved interoperability with Oracle Warehouse Builder which enables faster and easier migration to Oracle Data Integrator’s strategic data integration offering. Faster implementation of business analytics through Oracle Data Integrator pre-integrated with Oracle BI Applications’ latest release. Oracle Data Integrator also integrates simply and easily with Oracle Business Analytics tools, including OBI-EE and Oracle Hyperion. Support for loading and transforming big and fast data, enabled by integration with big data technologies: Hadoop, Hive, HDFS, and Oracle Big Data Appliance. Only Oracle GoldenGate provides the best-of-breed real-time replication of data in heterogeneous data environments. With the new capabilities in Oracle GoldenGate 12c, customers can benefit from: Simplified setup and management of Oracle GoldenGate 12c when using multiple database delivery processes via a new Coordinated Delivery feature for non-Oracle databases. Expanded heterogeneity through added support for the latest versions of major databases such as Sybase ASE v 15.7, MySQL NDB Clusters 7.2, and MySQL 5.6., as well as integration with Oracle Coherence. Enhanced high availability and data protection via integration with Oracle Data Guard and Fast-Start Failover integration. Enhanced security for credentials and encryption keys using Oracle Wallet. Real-time replication for databases hosted on public cloud environments supported by third-party clouds. Tight integration between Oracle Data Integrator 12c and Oracle GoldenGate 12c and other Oracle technologies, such as Oracle Database 12c and Oracle Applications, provides a number of benefits for organizations: Tight integration between Oracle Data Integrator 12c and Oracle GoldenGate 12c enables developers to leverage Oracle GoldenGate’s low overhead, real-time change data capture completely within the Oracle Data Integrator Studio without additional training. Integration with Oracle Database 12c provides a strong foundation for seamless private cloud deployments. Delivers real-time data for reporting, zero downtime migration, and improved performance and availability for Oracle Applications, such as Oracle E-Business Suite and ATG Web Commerce . Oracle’s data integration offering is optimized for Oracle Engineered Systems and is an integral part of Oracle’s fast data, real-time analytics strategy on Oracle Exadata Database Machine and Oracle Exalytics In-Memory Machine. Oracle Data Integrator 12c and Oracle GoldenGate 12c differentiate the new offering on data integration with these many new features. This is just a quick glimpse into Oracle Data Integrator 12c and Oracle GoldenGate 12c. Find out much more about the new release in the video webcast "Introducing 12c for Oracle Data Integration", where customer and partner speakers, including SolarWorld, BT, Rittman Mead will join us in launching the new release. Resource Kits Meet Oracle Data Integration 12c  Discover what's new with Oracle Goldengate 12c  Oracle EMEA DIS (Data Integration Solutions) Partner Community is available for all your questions, while additional partner focused webcasts will be made available through our blog here, so stay connected. For any questions please contact us at partner.imc-AT-beehiveonline.oracle-DOT-com Stay Connected Oracle Newsletters

  Read the article

• Vitality of Product Information Management Showcased at OpenWorld 2012

  - by Mala Narasimharajan

   By Sachin Patel Can you hear the countdown clock ticking!! OpenWorld 2012 is almost here and as I write this Oracle is buzzing with fresh new ideas and solutions that will be showcased this year. What an exciting time for all of us to be in midst of a digital revolution. Whether it is Apple fans clamoring to find every new feature that has been added to the iPhone 5 or a startup launching a new digital thermostat (has anyone looked at the new one from Nest ), product information is a vital for companies to grow and compete in this cut-throat market. Customer today struggle to aggregate and enrich this product data from the myriad of systems they have in place to run their businesses and operations. Having a product information strategy is paramount to align your sales channels and operations with the most accurate and upto date product data. We have a number of sessions this year at OpenWorld where you can gain more insight into how Oracle’s next generation of Fusion Applications, in this case Fusion Product Hub can provide you with a solution to streamline and get control of your Product Master Data. Enabling Trusted Enterprise Product Data with Oracle Fusion Product HubTuesday, October 2nd 11:45 am, Moscone West 2022 Join me Sachin Patel, Director of Product Strategy and Milan Bhatia, VP of Development as we discuss how you can enable trusted product master data in your enterprise. In this session we plan to cover the challenges companies face today in mastering product data. The discussion will also include how Fusion Product Hub brings new and innovative features to empower your product data owners to create a holistic and rich product definition that can be leveraged across your enterprise. We will also be joined by Pawel Fidelus from Fideltronik an Early Adopter for Fusion Product Hub who will showcase their plans to implement Fusion Product Hub and the value it will bring to Fideltronik Multichannel Fulfillment Excellence in Direct-to-Consumer Market Thursday, October 4th, 12:45 am, Moscone West 2024 Do you have multiple order capture systems? Do you have difficulty in fulfilling orders for your customers across various channels and suppliers? Mark Carson, Director, Fusion DOO and Brad Kerr, Director, AGSS will be showcasing the Fusion Distributed Order Orchestration solution and how companies can orchestrate orders from multiple order capture systems and route them to the appropriate fulfillment system. Sachin Patel, Director Product Strategy for Product MDM will highlight the business pain points in consolidating and commercializing data from a Multi Channel Commerce point of view and how Fusion Product Hub helps in allowing you to provide a single source of truth to drive a singular and rich customer experience. Oracle Fusion Supply Chain Management: Customer Adoption and Experiences                                                Wednesday, October 3rd 10:15 am, Moscone West 2003 This is a great session to attend to learn about how Fusion Supply Chain Management and Fusion Product Hub Early Adopters, including Boeing and Fideltronik are leveraging Fusion Applications to improve their Supply Chain operations. Have a great OpenWorld and see you soon!!

  Read the article

• how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

  - by Ayesha Ahmad

  i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

  Read the article

• MEB Support to NetBackup MMS

  - by Hema Sridharan

  In MySQL Enterprise Backup 3.6, new option was introduced to support backup to tapes via SBT interface. SBT stands for System Backup to Tape, an Oracle API that helps to perform backup and restore jobs via media management software such as Oracle's Secure Backup (OSB). There are other storage managers like IBM's Tivoli Storage Manager (TSM) and Symantec's Netbackup (NB) which are also supported by MEB but we don't guarantee that it will function as expected for every release. MEB supports SBT API version 2.0 In this blog, I am primarily going to focus the interface of MEB and Symantec's NB. If we are using tapes for backup, ensure that tape library and tape drives are compatible. Test Setup 1. Install NB 7.5 master and media servers in Linux OS. ( NB 7.1 can also be used but for testing purpose I used NB 7.5)2. Install MEB 3.8 also in Linux OS.3. Install NB admin console in your windows desktop and configure the NB master server from there. Note: Ensure that you have root user permission to install NetBackup. Configuration Steps for MEB and NB Once MEB and NB are installed, Ensure that NB is linked to MEB by specifying the library /usr/openv/netbackup/bin/libobk.so64 in the mysqlbackup command line using --sbt-lib-path. Configure the NB master server from windows console. That is configure the storage units by specifying the Storage unit name, Disk type, Media Server name etc.  Create NetBackup policies that are user selectable. But please make sure that policy type is "Oracle".  Define the clients where MEB will be executed. Some times this will be different host where MEB is run or some times in same Media server where NB and tapes are attached. Now once the installation and configuration steps are performed for MEB and NB, the next part is the actual execution.MEB should be run as single file backup using --backup-image option with prefix sbt:(it is a tag which tells MEB that it should stream the backup image through the SBT interface) which is sent to NB client via SBT interface . The resulting backup image is stored where NB stores the images that it backs up. The following diagram shows how MEB interacts with MMS through SBT interface. Backup The following parameters should also be ready for the execution,    --sbt-lib-path : Path to SBT library specific to NetBackup MMS. SBT lib for NetBackup  is in /usr/openv/netbackup/bin/libobk.so64    --sbt-environment: Environment variables must be defined specific to NetBackup. In our example below, we use     NB_ORA_SERV=myserver.com,    NB_ORA_CLIENT=myserver.com,    NB_ORA_POLICY=NBU-MEB    ORACLE_HOME = /export/home2/tmp/hema/mysql-server/ ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ./mysqlbackup --port=13000 --protocol=tcp --user=root --backup-image=sbt:bkpsbtNB --sbt-lib-path=/usr/openv/netbackup/bin/libobk.so64 --sbt-environment="NB_ORA_SERV=myserver.com, NB_ORA_CLIENT=myserver.com, NB_ORA_POLICY=NBU-MEB, ORACLE_HOME=/export/home2/tmp/hema/mysql-server/” --backup-dir=/export/home2/tmp/hema/MEB_bkdir/ backup-to-image ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Once backup is completed successfully, this should appear in Activity Monitor in NetBackup Console.For restore,  image contents has to be extracted using image-to-backup-dir command and then apply-log and copy-back steps are applied. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ./mysqlbackup --sbt-lib-path=/usr/openv/netbackup/bin/libobk.so64  --backup-dir=/export/home2/tmp/hema/NBMEB/ --backup-image=sbt:bkpsbtNB image-to-backup-dir-----------------------------------------------------------------------------------------------------------------------------------Now apply logs as usual, shutdown the server and perform restore, restart the server and check the data contents. ./mysqlbackup   ---backup-dir=/export/home2/tmp/hema/NBMEB/  apply-log ./mysqlbackup --datadir=/export/home2/tmp/hema/mysql-server/mysql-5.5-meb-repo/mysql-test/var/mysqld.1/data/  --backup-dir=/export/home2/tmp/hema/MEB_bkpdir/ innodb_log_files_in_group=2 --innodb_log_file_size=5M --user=root --port=13000 --protocol=tcp copy-back The NB console should show 'Restore" job as done. If you don't see that there is something wrong with MEB or NetBackup.You can also refer to more detailed steps of MEB and NB integration in whitepaper here

  Read the article

• Using the SOA-BPM VIrtualBox Appliance

  - by antony.reynolds

  Quickstart Guide to Using Oracle Appliance for SOA/BPM Recently I have been setting up some machines for fellow engineers.  My base setup consists of Oracle Enterprise Linux with Oracle Virtual Box.  Note that after installing VirtualBox I needed to add the VirtualBox Extension Pack to enable RDP access amongst other features.  In order to get them started quickly with some images I downloaded the pre-built appliance for SOA/BPM from OTN. Out of the box this provides a VirtualBox image that is pre-installed with everything you will need to develop SOA/BPM applications. Specifically by using the virtual appliance I got the following pre-installed and configured. Oracle Enterprise Linux 5 User oracle password oracle User root password oracle. Oracle Database XE Pre-configured with SOA/BPM repository. Set to auto-start on OS startup. Oracle SOA Suite 11g PS2 Configured with a “collapsed domain”, all services (SOA/BAM/EM) running in AdminServer. Listening on port 7001 Oracle BPM Suite 11g Configured in same domain as SOA Suite. Oracle JDeveloper 11g With SOA/BPM extensions. Networking The VM by default uses NAT (Network Address Translation) for network access.  Make sure that the advanced settings for port forwarding allow access through the host to guest ports.  It should be pre-configured to forward requests on the following ports Purpose Host Port Guest Port (VBox Image) SSH 2222 22 HTTP 7001 7001 Database 1521 1521 Note that only one VirtualBox image can use a given host port, so make sure you are not clashing if it seems not to work. What’s Left to Do? There is still some customization of the environment that may be required. If you need to configure a proxy server as I did then for the oracle and root users to set up an HTTP proxy Added “export http_proxy=http://proxy-host:proxy-port” to ~oracle/.bash_profile and ~root/.bash_profile Added “export http_proxy=http://proxy-host:proxy-port” to /etc/.bashrc Edited System->Preferences to set Network Proxy In Firefox set Preferences->Network->Connection Settings to “Use system proxy settings” In JDeveloper set Edit->Preferences->Web Browser and Proxy to required proxy settings You may need to configure yum to point to a public OEL yum repository – such as http://public-yum.oracle.com. If you are going to be accessing the SOA server from outside the VirtualBox image then you may want to set the soa-infra Server URLs to be the hostname of the host OS. Snap! Once I had the machine configured how I wanted to use it I took a snapshot so that I can always get back to the pristine install I have now.  Snapshots are one of the big benefits of putting a development environment into a virtualized environment.  I can make changes to my installation and if I mess it up I can restore the image to a last known good snapshot. Hey Presto!, Ready to Go This is the quickest way to get up and running with SOA/BPM Suite.  Out of the box the download will work, I only did extra customization so I could use services outside the firewall and browse outside the firewall from within by SOA VirtualBox image.  I also use yum to update the OS to the latest binaries. So have fun.

  Read the article

• Radeon Mobility HD 5470 Not Working

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• Folders in SQL Server Data Tools

  - by jamiet

  Recently I have begun a new project in which I am using SQL Server Data Tools (SSDT) and SQL Server Integration Services (SSIS) 2012. Although I have been using SSDT & SSIS fairly extensively while SQL Server 2012 was in the beta phase I usually find that you don’t learn about the capabilities and quirks of new products until you use them on a real project, hence I am hoping I’m going to have a lot of experiences to share on my blog over the coming few weeks. In this first such blog post I want to talk about file and folder organisation in SSDT. The predecessor to SSDT is Visual Studio Database Projects. When one created a new Visual Studio Database Project a folder structure was provided with “Schema Objects” and “Scripts” in the root and a series of subfolders for each schema: Apparently a few customers were not too happy with the tool arbitrarily creating lots of folders in Solution Explorer and hence SSDT has gone in completely the opposite direction; now no folders are created and new objects will get created in the root – it is at your discretion where they get moved to: After using SSDT for a few weeks I can safely say that I preferred the older way because I never used Solution Explorer to navigate my schema objects anyway so it didn’t bother me how many folders it created. Having said that the thought of a single long list of files in Solution Explorer without any folders makes me shudder so on this project I have been manually creating folders in which to organise files and I have tried to mimic the old way as much as possible by creating two folders in the root, one for all schema objects and another for Pre/Post deployment scripts: This works fine until different developers start to build their own different subfolder structures; if you are OCD-inclined like me this is going to grate on you eventually and hence you are going to want to move stuff around so that you have consistent folder structures for each schema and (if you have multiple databases) each project. Moreover new files get created with a filename of the object name + “.sql” and often people like to have an extra identifier in the filename to indicate the object type: The overall point is this – files and folders in your solution are going to change. Some version control systems (VCSs) don’t take kindly to files being moved around or renamed because they recognise the renamed/moved file simply as a new file and when they do that you lose the revision history which, to my mind, is one of the key benefits of using a VCS in the first place. On this project we have been using Team Foundation Server (TFS) and while it pains me to say it (as I am no great fan of TFS’s version control system) it has proved invaluable when dealing with the SSDT problems that I outlined above because it is integrated right into the Visual Studio IDE. Thus the advice from this blog post is: If you are using SSDT consider using an Visual-Studio-integrated VCS that can easily handle file renames and file moves I suspect that fans of other VCSs will counter by saying that their VCS weapon of choice can handle renames/file moves quite satisfactorily and if that’s the case…great…let me know about them in the comments. This blog post is not an attempt to make people use one particular VCS, only to make people aware of this issue that might rise when using SSDT. More to come in the coming few weeks! @jamiet

  Read the article

• Radeon Mobility HD 5470 Not Working on Ubuntu 10.10

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• Programmatically disclosing a node in af:tree and af:treeTable

  - by Frank Nimphius

  A common developer requirement when working with af:tree or af:treeTable components is to programmatically disclose (expand) a specific node in the tree. If the node to disclose is not a top level node, like a location in a LocationsView -> DepartmentsView -> EmployeesView hierarchy, you need to also disclose the node's parent node hierarchy for application users to see the fully expanded tree node structure. Working on ADF Code Corner sample #101, I wrote the following code lines that show a generic option for disclosing a tree node starting from a handle to the node to disclose. The use case in ADF Coder Corner sample #101 is a drag and drop operation from a table component to a tree to relocate employees to a new department. The tree node that receives the drop is a department node contained in a location. In theory the location could be part of a country and so on to indicate the depth the tree may have. Based on this structure, the code below provides a generic solution to parse the current node parent nodes and its child nodes. The drop event provided a rowKey for the tree node that received the drop. Like in af:table, the tree row key is not of type oracle.jbo.domain.Key but an implementation of java.util.List that contains the row keys. The JUCtrlHierBinding class in the ADF Binding layer that represents the ADF tree binding at runtime provides a method named findNodeByKeyPath that allows you to get a handle to the JUCtrlHierNodeBinding instance that represents a tree node in the binding layer. CollectionModel model = (CollectionModel) your_af_tree_reference.getValue(); JUCtrlHierBinding treeBinding = (JUCtrlHierBinding ) model.getWrappedData(); JUCtrlHierNodeBinding treeDropNode = treeBinding.findNodeByKeyPath(dropRowKey); To disclose the tree node, you need to create a RowKeySet, which you do using the RowKeySetImpl class. Because the RowKeySet replaces any existing row key set in the tree, all other nodes are automatically closed. RowKeySetImpl rksImpl = new RowKeySetImpl(); //the first key to add is the node that received the drop //operation (departments).            rksImpl.add(dropRowKey);    Similar, from the tree binding, the root node can be obtained. The root node is the end of all parent node iteration and therefore important. JUCtrlHierNodeBinding rootNode = treeBinding.getRootNodeBinding(); The following code obtains a reference to the hierarchy of parent nodes until the root node is found. JUCtrlHierNodeBinding dropNodeParent = treeDropNode.getParent(); //walk up the tree to expand all parent nodes while(dropNodeParent != null && dropNodeParent != rootNode){    //add the node's keyPath (remember its a List) to the row key set    rksImpl.add(dropNodeParent.getKeyPath());      dropNodeParent = dropNodeParent.getParent(); } Next, you disclose the drop node immediate child nodes as otherwise all you see is the department node. Its not quite exactly "dinner for one", but the procedure is very similar to the one handling the parent node keys ArrayList<JUCtrlHierNodeBinding> childList = (ArrayList<JUCtrlHierNodeBinding>) treeDropNode.getChildren();                     for(JUCtrlHierNodeBinding nb : childList){   rksImpl.add(nb.getKeyPath()); } Next, the row key set is defined as the disclosed row keys on the tree so when you refresh (PPR) the tree, the new disclosed state shows tree.setDisclosedRowKeys(rksImpl); AdfFacesContext.getCurrentInstance().addPartialTarget(tree.getParent()); The refresh in my use case is on the tree parent component (a layout container), which usually shows the best effect for refreshing the tree component. 

  Read the article

• Cannot Mount USB 3.0 Hard Disk ?!!

  - by Tenken

  Hi, I have a USB 3.0 external hard disk which I am unable to mount. The entry appears in the "lsusb" command, but I do not exactly understand how to mount it. This is the output for my lsusb command. "ASMedia Technology Inc." is the USB 3.0 device. I would appreciate some help in mounting and accessing the hard disk. This the relevant output of my "lsusb -v" : Bus 009 Device 002: ID 174c:5106 ASMedia Technology Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x174c ASMedia Technology Inc. idProduct 0x5106 bcdDevice 0.01 iManufacturer 2 ASMedia iProduct 3 AS2105 iSerial 1 00000000000000000000 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.35-28-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:04:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0503 highspeed power enable connect Port 4: 0000.0503 highspeed power enable connect Device Status: 0x0003 Self Powered Remote Wakeup Enabled This is the error given when I try to mount the hard drive: shinso@shinso-IdeaPad:~$ sudo mount /dev/sdb /mnt [sudo] password for shinso: mount: /dev/sdb: unknown device This the output of "dmesg|tail": [30062.774178] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [30535.800977] usb 9-4: USB disconnect, address 3 [30659.237342] Valid eCryptfs headers not found in file header region or xattr region [30659.237351] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31259.268310] Valid eCryptfs headers not found in file header region or xattr region [31259.268313] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31860.059058] Valid eCryptfs headers not found in file header region or xattr region [31860.059062] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [32465.220590] Valid eCryptfs headers not found in file header region or xattr region [32465.220593] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO I am using Ubuntu 10.10 (64 bit). Any help is appreciated.

  Read the article

• The Best Data Integration for Exadata Comes from Oracle

  - by maria costanzo

  Oracle Data Integrator and Oracle GoldenGate offer unique and optimized data integration solutions for Oracle Exadata. For example, customers that choose to feed their data warehouse or reporting database with near real-time throughout the day, can do so without decreasing  performance or availability of source and target systems. And if you ask why real-time, the short answer is: in today’s fast-paced, always-on world, business decisions need to use more relevant, timely data to be able to act fast and seize opportunities. A longer response to "why real-time" question can be found in a related blog post. If we look at the solution architecture, as shown on the diagram below,  Oracle Data Integrator and Oracle GoldenGate are both uniquely designed to take full advantage of the power of the database and to eliminate unnecessary middle-tier components. Oracle Data Integrator (ODI) is the best bulk data loading solution for Exadata. ODI is the only ETL platform that can leverage the full power of Exadata, integrate directly on the Exadata machine without any additional hardware, and by far provides the simplest setup and fastest overall performance on an Exadata system. We regularly see customers achieving a 5-10 times boost when they move their ETL to ODI on Exadata. For  some companies the performance gain is even much higher. For example a large insurance company did a proof of concept comparing ODI vs a traditional ETL tool (one of the market leaders) on Exadata. The same process that was taking 5hrs and 11 minutes to complete using the competing ETL product took 7 minutes and 20 seconds with ODI. Oracle Data Integrator was 42 times faster than the conventional ETL when running on Exadata.This shows that Oracle's own data integration offering helps you to gain the most out of your Exadata investment with a truly optimized solution. GoldenGate is the best solution for streaming data from heterogeneous sources into Exadata in real time. Oracle GoldenGate can also be used together with Data Integrator for hybrid use cases that also demand non-invasive capture, high-speed real time replication. Oracle GoldenGate enables real-time data feeds from heterogeneous sources non-invasively, and delivers to the staging area on the target Exadata system. ODI runs directly on Exadata to use the database engine power to perform in-database transformations. Enterprise Data Quality is integrated with Oracle Data integrator and enables ODI to load trusted data into the data warehouse tables. Only Oracle can offer all these technical benefits wrapped into a single intelligence data warehouse solution that runs on Exadata. Compared to traditional ETL with add-on CDC this solution offers: §  Non-invasive data capture from heterogeneous sources and avoids any performance impact on source §  No mid-tier; set based transformations use database power §  Mini-batches throughout the day –or- bulk processing nightly which means maximum availability for the DW §  Integrated solution with Enterprise Data Quality enables leveraging trusted data in the data warehouse In addition to Starwood Hotels and Resorts, Morrison Supermarkets, United Kingdom’s fourth-largest food retailer, has seen the power of this solution for their new BI platform and shared their story with us. Morrisons needed to analyze data across a large number of manufacturing, warehousing, retail, and financial applications with the goal to achieve single view into operations for improved customer service. The retailer deployed Oracle GoldenGate and Oracle Data Integrator to bring new data into Oracle Exadata in near real-time and replicate the data into reporting structures within the data warehouse—extending visibility into operations. Using Oracle's data integration offering for Exadata, Morrisons produced financial reports in seconds, rather than minutes, and improved staff productivity and agility. You can read more about Morrison’s success story here and hear from Starwood here. From an Irem Radzik article.

  Read the article

• edited and reversed changes on .htaccess - site starts redirecting to .comindex.php/

  - by Aurigae

  Site is a Joomla 2.5 site. I wanted to add a non www to www redirect to the htaccess file, did so, then the redirection went mad, reversed but still the site redirects. When i click view site in admin panel, i get linked to http://domain.comindex.php/ The website is http://www.domain.com Visiting the website URL works without www, but once you click on projects it acts mad too. Projects is managed with joomshopping extension. EDIT: the redirect also happens when rewrite is deactivated in admin panel. ## # @package Joomla # @copyright Copyright (C) 2005 - 2012 Open Source Matters. All rights reserved. # @license GNU General Public License version 2 or later; see LICENSE.txt ## ## # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE! # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. ## ## Can be commented out if causes errors, see notes above. Options +FollowSymLinks ## Mod_rewrite in use. RewriteEngine On ## Begin - Rewrite rules to block out some common exploits. # If you experience problems on your site block out the operations listed below # This attempts to block the most common type of exploit `attempts` to Joomla! # # Block out any script trying to base64_encode data within the URL. RewriteCond %{QUERY_STRING} base64_encode[^(]*\([^)]*\) [OR] # Block out any script that includes a <script> tag in URL. RewriteCond %{QUERY_STRING} (<|%3C)([^s]*s)+cript.*(>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL. RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL. RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Return 403 Forbidden header and show the content of the root homepage RewriteRule .* index.php [F] # ## End - Rewrite rules to block out some common exploits. ## Begin - Custom redirects # # If you need to redirect some pages, or set a canonical non-www to # www redirect (or vice versa), place that code here. Ensure those # redirects use the correct RewriteRule syntax and the [R=301,L] flags. # ## End - Custom redirects ## # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root). ## # RewriteBase / ## Begin - Joomla! core SEF Section. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}] # # If the requested path and file is not /index.php and the request # has not already been internally rewritten to the index.php script RewriteCond %{REQUEST_URI} !^/index\.php # and the request is for something within the component folder, # or for the site root, or for an extensionless URL, or the # requested URL ends with one of the listed extensions RewriteCond %{REQUEST_URI} /component/|(/[^.]*|\.(php|html?|feed|pdf|vcf|raw))$ [NC] # and the requested path and file doesn't directly match a physical file RewriteCond %{REQUEST_FILENAME} !-f # and the requested path and file doesn't directly match a physical folder RewriteCond %{REQUEST_FILENAME} !-d # internally rewrite the request to the index.php script RewriteRule .* index.php [L] # ## End - Joomla! core SEF Section. Redirect 301 /index.html /index.php Redirect 301 /services /project Redirect 301 /projects/projects.html /project Redirect 301 /projects/project1.html /project Redirect 301 /projects/project2.html /project Redirect 301 /projects /project Redirect 301 /keypersonnel.html /about-agrin/keystaff Redirect 301 /cooperation.htm /about-agrin/intcoop Redirect 301 /member.html /about-agrin/memberships Redirect 301 /contact.html /contacts Redirect 301 /hr.htm /jobs Redirect 301 /index.php/404 /index.php

  Read the article

• Shrinking a Linux OEL 6 virtual Box image (vdi) hosted on Windows 7

  - by AndyBaker

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Recently for a customer demonstration there was a requirement to build a virtual box image with Oracle Enterprise Manager Cloud Control 12c. This meant installing OEL Linux 6 as well as creating an 11gr2 database and Oracle Enterprise Manager Cloud Control 12c on a single virtual box. Storage was sized at 300Gb using dynamically allocated storage for the virtual box and about 10Gb was used for Linux and the initial build. After copying over all the binaries and performing all the installations the virtual box became in the region of 80Gb used size on the host operating system, however internally it only really needed around 20Gb. This meant 60Gb had been used when copying over all the binaries and although now free was not returned to the host operating system due to the growth of the virtual box storage '.vdi' file.  Once the ‘vdi’ storage had grown it is not shrunk automatically afterwards. Space is always tight on the laptop so it was desirable to shrink the virtual box back to a minimal size and here is the process that was followed. Install 'zerofree' Linux package into the OEL6 virtual box The RPM was downloaded and installed from a site similar to below; http://rpm.pbone.net/index.php3/stat/4/idpl/12548724/com/zerofree-1.0.1-5.el5.i386.rpm.html A simple internet search for ’zerofree Linux rpm’ was easy to perform and find the required rpm. Execute 'zerofree' package on the desired Linux file system To execute this package the desired file system needs to be mounted read only. The following steps outline this process. As root: # umount /u01 As root:# mount –o ro –t ext4 /u01 NOTE: The –o is options and the –t is the file system type found in the /etc/fstab. Next run zerofree against the required storage, this is located by a simple ‘df –h’ command to see the device associated with the mount. As root:# zerofree –v /dev/sda11   NOTE: This takes a while to run but the ‘-v’ option gives feedback on the process. What does Zerofree do? Zerofree’s purpose is to go through the file system and zero out any unused sectors on the volume so that the later stages can shrink the virtual box storage obtaining the free space back. When zerofree has completed the virtual box can be shutdown as the last stage is performed on the physical host where the virtual box vdi files are located. Compact the virtual box ‘.vdi’ files The final stage is to get virtual box to shrink back the storage that has been correctly flagged as free space after executing zerofree. On the physical host in this case a windows 7 laptop a DOS window was opened. At the prompt the first step is to put the virtual box binaries onto the PATH. C:\ >echo %PATH%   The above shows the current value of the PATH environment variable. C:\ >set PATH=%PATH%;c:\program files\Oracle\Virtual Box;   The above adds onto the existing path the virtual box binary location. C:\>cd c:\Users\xxxx\OEL6.1   The above changes directory to where the VDI files are located for the required virtual box machine. C:\Users\xxxxx\OEL6.1>VBoxManage.exe modifyhd zzzzzz.vdi compact  NOTE: The zzzzzz.vdi is the name of the required vdi file to shrink. Finally the above command is executed to perform the compact operation on the ‘.vdi’ file(s). This also takes a long time to complete but shrinks the VDI file back to a minimum size. In the case of the demonstration virtual box OEM12c this reduced the virtual box to 20Gb from 80Gb which was a great outcome to achieve.

  Read the article

• Mutual SSL Client Authentication

  - by nordisk

  Hi, I'm trying to achieve mutual SSL client authentication but without much success so far. Let me explain my scenario first: I have a client certificate issued by an intermediate CA whose certificate in turn was issued by a root CA (the intermediate and root CAs are within the company's network). This is the certificate I am including as part of my call to the server (using the HttpWebRequest object). The server has imported my client certificate and it is one of the certificates presented to me. An important thing to note is that the server does not trust the intermediate CA or the root for that matter. What we're trying to achieve is authentication against the certificate directly, i.e. mutual authentication using my client certificate. The error I'm getting is: "The request was aborted: Could not create SSL/TLS secure channel." From my trace logs I also get the following: System.Net Information: 0 : [3380] SecureChannel#34868631 - We have user-provided certificates. The server has specified 2 issuer(s). Looking for certificates that match any of the issuers. System.Net Information: 0 : [3380] SecureChannel#34868631 - Left with 0 client certificates to choose from. One of the certificates presented to us from the server is the same as our client certificate but the matching between them seems to fail. It looks like it's trying to verify the issuer. Now to make things even more interesting: If the server trusts and sends back the intermediate CA then everything works fine! (This is not an option for the production environment though I'm told) Using jmeter to test the request works fine too. I can only assume that Java's SSL handshake implementation is somewhat different. So it really comes down to this: Do you need to implement mutual SSL authentication differently from normal client SSL authentication? Any ideas or comments would be greatly appreciated.

  Read the article

• The HTTP request was forbidden with client authentication scheme 'Anonymous'

  - by dudia

  I am trying to configure a WCF server\client to work with SSL I get the following exception: The HTTP request was forbidden with client authentication scheme 'Anonymous' I have a self hosted WCF server. I have run hhtpcfg both my client and server certificates are stored under Personal and Trusted People on the Local Machine Here is the server code: binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.Certificate; binding.Security.Mode = WebHttpSecurityMode.Transport; _host.Credentials.ClientCertificate.Authentication.CertificateValidationMode = System.ServiceModel.Security.X509CertificateValidationMode.PeerOrChainTrust; _host.Credentials.ClientCertificate.Authentication.RevocationMode = X509RevocationMode.NoCheck; _host.Credentials.ClientCertificate.Authentication.TrustedStoreLocation = StoreLocation.LocalMachine; _host.Credentials.ServiceCertificate.SetCertificate("cn=ServerSide", StoreLocation.LocalMachine, StoreName.My); Client Code: binding.Security.Mode = WebHttpSecurityMode.Transport; binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.Certificate; WebChannelFactory<ITestClientForServer> cf = new WebChannelFactory<ITestClientForServer>(binding, url2Bind); cf.Credentials.ClientCertificate.SetCertificate("cn=ClientSide", StoreLocation.LocalMachine, StoreName.My); ServicePointManager.ServerCertificateValidationCallback += RemoteCertificateValidate; Looking at web_tracelog.svclog and trace.log reveals that the server cannot autheticate the client certificate My certificate are not signed by an Authorized CA but this is why I added them to the Trusted People.... What Am I missing? What am I missing?

  Read the article

• Visual Studio: Add Item / Add as link rather than just Add

  - by Pete d'Oronzio

  I'm new to visual studio, coming from Delphi. I have a directory tree full of .cs files (root is \Common). I also have a directory tree full of Applications (root is \Applications) Finally, I've got a tree full of Assemblies (root is \Assemblies) I'd like to keep my .cs files in the Common tree and all the environment voodoo (solutions, projects, settings, metadata, debug data, bin, etc.) in the Assmblies tree. So, for a simple example, I've got an assembly called PdMagic.Common.Math.dll. The Solution and project is located in \Assemblies\Common\Math. All of its source (.cs) files are in \Common\Math. (matrix.cs, trig.cs, mathtypes.cs, mathfuncs.cs, stats.cs, etc.) When I use Add Existing Item to add matrix.cs to my project, a copy of it is added to the \Assemblies\Common\Math folder. I just want to reference it. I don't want multiple copies laying around. I've tried Add Existing Item, and used the drop down to "Add link" rather than just "Add", and that seems to do what I want. Question: What is the "best practice" for this sort of thing? Do most people just put those .cs files all in the same folder as the project? Why isn't "Add link" the default? Thanks!

  Read the article

• Spring, JPA, Hibernate, Jetty 7 Integration

  - by Jewel

  Have anyone successfully run any spring and JPA application in jetty 7? I am getting following exception. This application throws no error in jetty 6. INFO [main] org.eclipse.jetty.util.log - Logging to org.slf4j.impl.Log4jLoggerAdapter(org.eclipse.jetty.util.log) via org.eclipse.jetty.util.log.Slf4jLog INFO [main] org.eclipse.jetty.util.log - jetty-7.1.2.v20100523 INFO [main] org.eclipse.jetty.util.log - Deployment monitor G:\_Java\_Jetty\jetty-distribution-7.1.2.v20100523\contexts at interval 5 INFO [main] org.eclipse.jetty.util.log - Deployment monitor G:\_Java\_Jetty\jetty-distribution-7.1.2.v20100523\webapps at interval 5 INFO [main] org.eclipse.jetty.util.log - Deployable added: G:\_Java\_Jetty\jetty-distribution-7.1.2.v20100523\webapps\gwtrpc-spring.war INFO [main] org.eclipse.jetty.util.log - Copying WEB-INF/lib jar:file:/G:/_Java/_Jetty/jetty-distribution-7.1.2.v20100523/webapps/gwtrpc-spring.war!/WEB-INF/lib/ to C:\Documents and Settings\Jewel2\Local Settings\Temp\Jetty_0_0_0_0_8080_gwtrpc.spring.war__gwtrpc.spring__az1wdj\webinf\WEB-INF\lib INFO [main] org.eclipse.jetty.util.log - Copying WEB-INF/classes from jar:file:/G:/_Java/_Jetty/jetty-distribution-7.1.2.v20100523/webapps/gwtrpc-spring.war!/WEB-INF/classes/ to C:\Documents and Settings\Jewel2\Local Settings\Temp\Jetty_0_0_0_0_8080_gwtrpc.spring.war__gwtrpc.spring__az1wdj\webinf\WEB-INF\classes INFO [main] /gwtrpc-spring - Initializing Spring root WebApplicationContext INFO [main] org.springframework.web.context.ContextLoader - Root WebApplicationContext: initialization started INFO [main] org.springframework.web.context.support.XmlWebApplicationContext - Refreshing Root WebApplicationContext: startup date [Thu Jun 10 00:13:32 GMT+06:00 2010]; root of context hierarchy INFO [main] org.springframework.beans.factory.xml.XmlBeanDefinitionReader - Loading XML bean definitions from ServletContext resource [/WEB-INF/applicationContext.xml] INFO [main] org.springframework.beans.factory.support.DefaultListableBeanFactory - Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@467991: defining beans [org.springframework.context.annotation.internalConfigurationAnnotationProcessor,org.springframework.context.annotation.internalAutowiredAnnotationProcessor,org.springframework.context.annotation.internalRequiredAnnotationProcessor,org.springframework.context.annotation.internalCommonAnnotationProcessor,org.springframework.context.annotation.internalPersistenceAnnotationProcessor,greetingServiceImpl,testService,testService2,taskExecutor,dataSource,entityManagerFactory,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,transactionManager,org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor#0]; root of factory hierarchy INFO [main] org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor - Initializing ExecutorService 'taskExecutor' INFO [main] org.springframework.jdbc.datasource.DriverManagerDataSource - Loaded JDBC driver: com.mysql.jdbc.Driver INFO [main] org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean - Building JPA container EntityManagerFactory for persistence unit 'gwtrpc-spring-data-source' INFO [main] org.hibernate.cfg.annotations.Version - Hibernate Annotations 3.4.0.GA INFO [main] org.hibernate.cfg.Environment - Hibernate 3.3.1.GA INFO [main] org.hibernate.cfg.Environment - hibernate.properties not found INFO [main] org.hibernate.cfg.Environment - Bytecode provider name : javassist INFO [main] org.hibernate.cfg.Environment - using JDK 1.4 java.sql.Timestamp handling INFO [main] org.hibernate.annotations.common.Version - Hibernate Commons Annotations 3.1.0.GA INFO [main] org.hibernate.ejb.Version - Hibernate EntityManager 3.4.0.GA INFO [main] org.hibernate.ejb.Ejb3Configuration - Processing PersistenceUnitInfo [ name: gwtrpc-spring-data-source ...] INFO [main] org.springframework.beans.factory.support.DefaultListableBeanFactory - Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@467991: defining beans [org.springframework.context.annotation.internalConfigurationAnnotationProcessor,org.springframework.context.annotation.internalAutowiredAnnotationProcessor,org.springframework.context.annotation.internalRequiredAnnotationProcessor,org.springframework.context.annotation.internalCommonAnnotationProcessor,org.springframework.context.annotation.internalPersistenceAnnotationProcessor,greetingServiceImpl,testService,testService2,taskExecutor,dataSource,entityManagerFactory,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,transactionManager,org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor#0]; root of factory hierarchy INFO [main] org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor - Shutting down ExecutorService 'taskExecutor' ERROR [main] org.springframework.web.context.ContextLoader - Context initialization failed org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'entityManagerFactory' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Invocation of init method failed; nested exception is javax.persistence.PersistenceException: [PersistenceUnit: gwtrpc-spring-data-source] class or package not found at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1403) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:513) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:450) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:290) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:287) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:189) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:545) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:871) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:423) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:272) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:196) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47) at org.eclipse.jetty.server.handler.ContextHandler.startContext(ContextHandler.java:636) at org.eclipse.jetty.servlet.ServletContextHandler.startContext(ServletContextHandler.java:188) at org.eclipse.jetty.webapp.WebAppContext.startContext(WebAppContext.java:995) at org.eclipse.jetty.server.handler.ContextHandler.doStart(ContextHandler.java:579) at org.eclipse.jetty.webapp.WebAppContext.doStart(WebAppContext.java:381) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.deploy.bindings.StandardStarter.processBinding(StandardStarter.java:36) at org.eclipse.jetty.deploy.AppLifeCycle.runBindings(AppLifeCycle.java:182) at org.eclipse.jetty.deploy.DeploymentManager.requestAppGoal(DeploymentManager.java:497) at org.eclipse.jetty.deploy.DeploymentManager.addApp(DeploymentManager.java:135) at org.eclipse.jetty.deploy.providers.ScanningAppProvider$1.fileAdded(ScanningAppProvider.java:61) at org.eclipse.jetty.util.Scanner.reportAddition(Scanner.java:436) at org.eclipse.jetty.util.Scanner.reportDifferences(Scanner.java:349) at org.eclipse.jetty.util.Scanner.scan(Scanner.java:306) at org.eclipse.jetty.util.Scanner.start(Scanner.java:242) at org.eclipse.jetty.deploy.providers.ScanningAppProvider.doStart(ScanningAppProvider.java:136) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.deploy.DeploymentManager.startAppProvider(DeploymentManager.java:562) at org.eclipse.jetty.deploy.DeploymentManager.doStart(DeploymentManager.java:212) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.server.Server.doStart(Server.java:209) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.xml.XmlConfiguration$1.run(XmlConfiguration.java:1018) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.jetty.xml.XmlConfiguration.main(XmlConfiguration.java:983) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.jetty.start.Main.invokeMain(Main.java:447) at org.eclipse.jetty.start.Main.start(Main.java:605) at org.eclipse.jetty.start.Main.parseCommandLine(Main.java:238) at org.eclipse.jetty.start.Main.main(Main.java:77) Caused by: javax.persistence.PersistenceException: [PersistenceUnit: gwtrpc-spring-data-source] class or package not found at org.hibernate.ejb.Ejb3Configuration.addNamedAnnotatedClasses(Ejb3Configuration.java:1093) at org.hibernate.ejb.Ejb3Configuration.addClassesToSessionFactory(Ejb3Configuration.java:871) at org.hibernate.ejb.Ejb3Configuration.configure(Ejb3Configuration.java:758) at org.hibernate.ejb.Ejb3Configuration.configure(Ejb3Configuration.java:425) at org.hibernate.ejb.HibernatePersistence.createContainerEntityManagerFactory(HibernatePersistence.java:131) at org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean.createNativeEntityManagerFactory(LocalContainerEntityManagerFactoryBean.java:225) at org.springframework.orm.jpa.AbstractEntityManagerFactoryBean.afterPropertiesSet(AbstractEntityManagerFactoryBean.java:308) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1460) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1400) ... 45 more Caused by: java.lang.ClassNotFoundException: WEB-INF.classes.org.gwtrpcspring.example.server.Person at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Unknown Source) at org.hibernate.util.ReflectHelper.classForName(ReflectHelper.java:135) at org.hibernate.ejb.Ejb3Configuration.classForName(Ejb3Configuration.java:1009) at org.hibernate.ejb.Ejb3Configuration.addNamedAnnotatedClasses(Ejb3Configuration.java:1081) ... 53 more WARN [main] org.eclipse.jetty.util.log - Failed startup of context WebAppContext@149f041@149f041/gwtrpc-spring,file:/C:/Documents and Settings/Jewel2/Local Settings/Temp/Jetty_0_0_0_0_8080_gwtrpc.spring.war__gwtrpc.spring__az1wdj/webinf/;jar:file:/G:/_Java/_Jetty/jetty-distribution-7.1.2.v20100523/webapps/gwtrpc-spring.war!/;,G:\_Java\_Jetty\jetty-distribution-7.1.2.v20100523\webapps\gwtrpc-spring.war org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'entityManagerFactory' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Invocation of init method failed; nested exception is javax.persistence.PersistenceException: [PersistenceUnit: gwtrpc-spring-data-source] class or package not found at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1403) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:513) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:450) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:290) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:287) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:189) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:545) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:871) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:423) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:272) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:196) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47) at org.eclipse.jetty.server.handler.ContextHandler.startContext(ContextHandler.java:636) at org.eclipse.jetty.servlet.ServletContextHandler.startContext(ServletContextHandler.java:188) at org.eclipse.jetty.webapp.WebAppContext.startContext(WebAppContext.java:995) at org.eclipse.jetty.server.handler.ContextHandler.doStart(ContextHandler.java:579) at org.eclipse.jetty.webapp.WebAppContext.doStart(WebAppContext.java:381) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.deploy.bindings.StandardStarter.processBinding(StandardStarter.java:36) at org.eclipse.jetty.deploy.AppLifeCycle.runBindings(AppLifeCycle.java:182) at org.eclipse.jetty.deploy.DeploymentManager.requestAppGoal(DeploymentManager.java:497) at org.eclipse.jetty.deploy.DeploymentManager.addApp(DeploymentManager.java:135) at org.eclipse.jetty.deploy.providers.ScanningAppProvider$1.fileAdded(ScanningAppProvider.java:61) at org.eclipse.jetty.util.Scanner.reportAddition(Scanner.java:436) at org.eclipse.jetty.util.Scanner.reportDifferences(Scanner.java:349) at org.eclipse.jetty.util.Scanner.scan(Scanner.java:306) at org.eclipse.jetty.util.Scanner.start(Scanner.java:242) at org.eclipse.jetty.deploy.providers.ScanningAppProvider.doStart(ScanningAppProvider.java:136) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.deploy.DeploymentManager.startAppProvider(DeploymentManager.java:562) at org.eclipse.jetty.deploy.DeploymentManager.doStart(DeploymentManager.java:212) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.server.Server.doStart(Server.java:209) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.xml.XmlConfiguration$1.run(XmlConfiguration.java:1018) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.jetty.xml.XmlConfiguration.main(XmlConfiguration.java:983) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.jetty.start.Main.invokeMain(Main.java:447) at org.eclipse.jetty.start.Main.start(Main.java:605) at org.eclipse.jetty.start.Main.parseCommandLine(Main.java:238) at org.eclipse.jetty.start.Main.main(Main.java:77) Caused by: javax.persistence.PersistenceException: [PersistenceUnit: gwtrpc-spring-data-source] class or package not found at org.hibernate.ejb.Ejb3Configuration.addNamedAnnotatedClasses(Ejb3Configuration.java:1093) at org.hibernate.ejb.Ejb3Configuration.addClassesToSessionFactory(Ejb3Configuration.java:871) at org.hibernate.ejb.Ejb3Configuration.configure(Ejb3Configuration.java:758) at org.hibernate.ejb.Ejb3Configuration.configure(Ejb3Configuration.java:425) at org.hibernate.ejb.HibernatePersistence.createContainerEntityManagerFactory(HibernatePersistence.java:131) at org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean.createNativeEntityManagerFactory(LocalContainerEntityManagerFactoryBean.java:225) at org.springframework.orm.jpa.AbstractEntityManagerFactoryBean.afterPropertiesSet(AbstractEntityManagerFactoryBean.java:308) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1460) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1400) ... 45 more Caused by: java.lang.ClassNotFoundException: WEB-INF.classes.org.gwtrpcspring.example.server.Person at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Unknown Source) at org.hibernate.util.ReflectHelper.classForName(ReflectHelper.java:135) at org.hibernate.ejb.Ejb3Configuration.classForName(Ejb3Configuration.java:1009) at org.hibernate.ejb.Ejb3Configuration.addNamedAnnotatedClasses(Ejb3Configuration.java:1081) ... 53 more INFO [main] org.eclipse.jetty.util.log - Started [email protected]:8080 And this is my applicationContext.xml file <?xml version="1.0" encoding="UTF-8"?> <beans> <context:annotation-config /> <context:component-scan base-package="org.gwtrpcspring.example.server" /> <bean id="taskExecutor" class="org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor"> <property name="corePoolSize" value="5" /> <property name="maxPoolSize" value="10" /> <property name="queueCapacity" value="25" /> </bean> <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource"> <property name="driverClassName" value="com.mysql.jdbc.Driver" /> <property name="url" value="jdbc:mysql://localhost:3306/test" /> <property name="username" value="jewel" /> <property name="password" value="jewel" /> </bean> <bean id="entityManagerFactory" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean"> <property name="dataSource" ref="dataSource" /> <property name="jpaVendorAdapter"> <bean class="org.springframework.orm.jpa.vendor.HibernateJpaVendorAdapter"> <property name="databasePlatform" value="org.hibernate.dialect.MySQLDialect" /> <!-- <property name="databasePlatform" value="org.hibernate.dialect.HSQLDialect" /> --> <property name="showSql" value="false" /> <property name="generateDdl" value="true" /> </bean> </property> </bean> <tx:annotation-driven /> <bean id="transactionManager" class="org.springframework.orm.jpa.JpaTransactionManager"> <property name="entityManagerFactory" ref="entityManagerFactory" /> </bean> <bean class="org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor" /> </beans>

  Read the article

• How can I beta test web Perl modules under Apache/mod_perl on production web server?

  - by DVK

  We have a setup where most code, before being promoted to full production, is deployed in BETA mode - meaning, it runs in full production environment (using production database - usually production data; and production web server). We call that stage BETA testing. One of the main requirements is that BETA code promotion to production must be a simple "cp" command from beta to production directory - no code/filename changes. For non-web Perl code, achieving seamless BETA test is quite doable (see details here): Perl programs live in a standard location under production root (/usr/code/scripts) with production perl modules living under the same root (/usr/code/lib/perl) The BETA code has 100% same code paths except under beta root (/usr/code/beta/) A special module manipulates @INC of any script based on whether the script was called from /usr/code/scripts or /usr/code/test/scripts, to include beta libraries for beta scripts. This setup works fine up till we need to beta test our web Perl code (the setup is EmbPerl and Apache/mod_perl). The hang-up is as follows: if both a production Perl module and BETA Perl module have the same name (e.g. /usr/code/lib/perl/MyLib1.pm and /usr/code/beta/lib/perl/MyLib1.pm), then mod_perl will only be able to load ONE of these modules into memory - and there's no way we are aware of for a particular web page to affect which version of the module is currently loaded due to concurrency issues. Leaving aside the obvious non-programming solution (get a bloody BETA web server) which for political/organizational reasons is not feasible, is there any way we can somehow hack around this problem in either Perl or mod_perl? I played around with various approaches to unloading Perl modules that %INC has listed, but the problem remains that another user might load a beta page at just the right (or rather wrong) moment and have the beta module loaded which will be used for my production page.

  Read the article

• Android - Using PreferenceScreen to display and save settings to/from ContentProvider

  - by Donal Rafferty

  I have my own custom Content Provider that loads a datasbase which contains the settings information for my application. I load the settings from the ContentProvider on the creation of my Settings activity. My Settings activity is made up of a PreferenceScreen and Dialog based EditText's. The following code shows how I use the preference screen and edit texts. So as you can see from the first image this works and displays the menu with the information underneath. The problem is in image two, when I click on a choice in the menu the dialog pops up but it is empty, I would like to be able to load the data from my content provider into the edit text in the dialog, so in image one it shows "Donal" as the user name so in image two "Donal" should also appear in the edit text in the dialog. I would also like to be able to listen to the OK button in the dialog so when a user changes a setting I can update the data in my content provider. Can anyone help me with what I'm trying to do? Code // Root PreferenceScreen root = getPreferenceManager().createPreferenceScreen(this); // Dialog based preferences PreferenceCategory dialogBasedPrefCat = new PreferenceCategory(this); dialogBasedPrefCat.setTitle(R.string.dialog_based_preferences); root.addPreference(dialogBasedPrefCat); // Edit text preference EditTextPreference editTextPref = new EditTextPreference(this); editTextPref.setDialogTitle(R.string.dialog_title_edittext_preference); editTextPref.setKey("edittext_preference"); editTextPref.setTitle(R.string.title_edittext_preference); editTextPref.setSummary(name); dialogBasedPrefCat.addPreference(editTextPref); Image One Image Two

  Read the article

• Passenger, Nginx, and Capistrano - Passenger not launching Rails app at all

  - by Throlkim

  Essentially, my route is working perfectly, Passenger seems to be loading - all is hunky-dory. Except that nothing Railsy happens. Here's my Nginx log from starting the server to the first request (ignore the different domain/route - it's because I haven't moved the new domain over yet, and it's returning a 403 error because there's no index file in the public folder): [ pid=24559 file=ext/nginx/HelperServer.cpp:826 time=2009-11-10 00:49:13.227 ]: Passenger helper server started on PID 24559 [ pid=24559 file=ext/nginx/HelperServer.cpp:831 time=2009-11-10 00:49:13.227 ]: Password received. 2009/11/10 00:49:53 [error] 24578#0: *1 directory index of "/var/www/***/current/public/" is forbidden, client: 188.221.195.27, server: ***, request: "GET / HTTP/1.1", host: "***" 2009/11/10 00:49:54 [error] 24578#0: *1 open() "/var/www/***/current/public/favicon.ico" failed (2: No such file or directory), client: 188.221.195.27, server: ***, request: "GET /favicon.ico HTTP/1.1", host: "***", referrer: "***" Someone on the RubyOnRails IRC channel suggested that it might be a webserver permissions problem. I had a suspicion that it might be a filesystem permission problem, but then Nginx runs as www-data and Passenger as root. I can load static files from within the public directory fine, but no Rails application is being launched. Does anyone have an idea? My head is gradually melting away figuring this one out! Edit: Here's the vhost file: server { listen 80; server_name ***; passenger_enabled on; location / { root /var/www/***/current/public; index index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } }

  Read the article

• how to 'load data infile' on amazon RDS?

  - by feydr

  not sure if this is a question better suited for serverfault but I've been messing with amazon RDS lately and was having trouble getting 'file' privileges to my web host mysql user. I'd assume that a simple: grant file on *.* to 'webuser@'%'; would work but it does not and I can't seem to do it with my 'root' user as well. What gives? The reason we use load data is because it is super super fast for doing thousands of inserts at once. anyone know how to remedy this or do I need to find a different way? This page, http://docs.amazonwebservices.com/AmazonRDS/latest/DeveloperGuide/index.html?Concepts.DBInstance.html seems to suggest that I need to find a different way around this. Help? UPDATE I'm not trying to import a database -- I just want to use the file load option to insert several hundred-thousand rows at a time. after digging around this is what we have: mysql> grant file on *.* to 'devuser'@'%'; ERROR 1045 (28000): Access denied for user 'root'@'%' (using password: YES) mysql> select User, File_priv, Grant_priv, Super_priv from mysql.user; +----------+-----------+------------+------------+ | User | File_priv | Grant_priv | Super_priv | +----------+-----------+------------+------------+ | rdsadmin | Y | Y | Y | | root | N | Y | N | | devuser | N | N | N | +----------+-----------+------------+------------+

  Read the article

• OAuthWebSecurity.VerifyAuthentication IsSuccessful returns false how do I to determine the reason?

  - by Eonasdan

  I'm using DotNetOpenAuth with a MVC 4 application. All the sudden Google auth is failing (MS is working). The stock code does this: [AllowAnonymous] public ActionResult ExternalLoginCallback(string returnUrl) { var result = OAuthWebSecurity.VerifyAuthentication(Url.Action("ExternalLoginCallback", new { ReturnUrl = returnUrl })); if (!result.IsSuccessful) { return RedirectToAction("ExternalLoginFailure"); } I know that result.IsSuccessful is false, but how do I get the reason? result.Error is null. I also looked at this page to use log4net. I do get a log on the local dev box but not when I deploy it to a remote server. log4net webconfig: <log4net> <appender name="RollingFileAppender" type="log4net.Appender.RollingFileAppender"> <file value="RelyingParty.log" /> <appendToFile value="true" /> <rollingStyle value="Size" /> <maxSizeRollBackups value="10" /> <maximumFileSize value="100KB" /> <staticLogFileName value="true" /> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%date (GMT%date{%z}) [%thread] %-5level %logger - %message%newline" /> </layout> </appender> <!-- Setup the root category, add the appenders and set the default level --> <root> <level value="INFO" /> <appender-ref ref="RollingFileAppender" /> </root> <!-- Specify the level for some specific categories --> <logger name="DotNetOpenAuth"> <level value="ALL" /> </logger> </log4net> Edit I also tried log4net to a sql db but it still didn't log anything

  Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >