Search Results

Search found 4647 results on 186 pages for 'localizable strings'.

Page 148/186 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

  • Strange rare out-of-order data received using Indy

    - by Jim
    We're having a bizarre problem with Indy10 where two large strings (a few hundred characters each) that we send out one after the other are appearing at the other end intertwined oddly. This happens extremely infrequently. Each string is a complete XML message terminated with a LF and in general the READ process reads an entire XML message, returning when it sees the LF. The call to actually send the message is protected by a critical section around the call to the IOHandler's writeln method and so it is not possible for two threads to send at the same time. (We're certain the critical section is implemented/working properly). This problem happens very rarely. The symptoms are odd...when we send string A followed by string B what we received at the other end (on the rare occasions where we have failure) is the trailing section of string A by itself (i.e., there's a LF at the end of it) followed by the leading section of string A and then the entire string B followed by a single LF. We've verified that the "timed out" property is not true after the partial read - we log that property after every read that returns content. Also, we know there are no embedded LF characters in the string, as we explicitly replace all non-alphanumeric characters in the string with spaces before appending the LF and sending it. We have log mechanisms inside the critical sections on both the transmission and receiving ends and so we can see this behavior at the "wire". We're completely baffled and wondering (although always the lowest possibility) whether there could be some low-level Indy issues that might cause this issue, e.g., buffers being sent in the wrong order....very hard to believe this could be the issue but we're grasping at straws. Does anyone have any bright ideas?

    Read the article

  • Allowed unicode characters in IDN host labels

    - by Roland Franssen
    Hi all, Im currently working on a "proper" URI validator and currently it all comes down to hostname validation, the rest isnt that tricky. Im stuck at IDN hostname labels (e.g. containing unicode; possible punycode encoded strings have been decoded at this point). My first idea was basicly a regex for TLD's not supporting IDN and one for those who do (http://www.mozilla.org/projects/security/tld-idn-policy-list.html (?)). Respectively; ^[a-zA-Z0-9-]+$ and ^[a-zA-Z0-9-\p{L}]+$ However this is not an ideal situation, since every IDN registrar can decide which characters to allow and which not. What im looking for is a proper, consistent, up2date data table of unicode characters allowed in various TLD's; im getting this idea i have to find all the data myself at russian and chinese registry sites (which is quite difficult). So before spitting down the web.. i wondered is there such a list? Or are there better approaches, best/common practices etc? (I want the validation to be as strict as possible.) Any help is welcome! // Roland

    Read the article

  • Render view to string followed by redirect results in exception

    - by Chris Charabaruk
    So here's the issue: I'm building e-mails to be sent by my application by rendering full view pages to strings and sending them. This works without any problem so long as I'm not redirecting to another URL on the site afterwards. Whenever I try, I get "System.Web.HttpException: Cannot redirect after HTTP headers have been sent." I believe the problem comes from the fact I'm reusing the context from the controller action where the call for creating the e-mail comes from. More specifically, the HttpResponse from the context. Unfortunately, I can't create a new HttpResponse that makes use of HttpWriter because the constructor of that class is unreachable, and using any other class derived from TextWriter causes response.Flush() to throw an exception, itself. Does anyone have a solution for this? public static string RenderViewToString( ControllerContext controllerContext, string viewPath, string masterPath, ViewDataDictionary viewData, TempDataDictionary tempData) { Stream filter = null; ViewPage viewPage = new ViewPage(); //Right, create our view viewPage.ViewContext = new ViewContext(controllerContext, new WebFormView(viewPath, masterPath), viewData, tempData); //Get the response context, flush it and get the response filter. var response = viewPage.ViewContext.HttpContext.Response; //var response = new HttpResponseWrapper(new HttpResponse // (**TextWriter Goes Here**)); response.Flush(); var oldFilter = response.Filter; try { //Put a new filter into the response filter = new MemoryStream(); response.Filter = filter; //Now render the view into the memorystream and flush the response viewPage.ViewContext.View.Render(viewPage.ViewContext, viewPage.ViewContext.HttpContext.Response.Output); response.Flush(); //Now read the rendered view. filter.Position = 0; var reader = new StreamReader(filter, response.ContentEncoding); return reader.ReadToEnd(); } finally { //Clean up. if (filter != null) filter.Dispose(); //Now replace the response filter response.Filter = oldFilter; } }

    Read the article

  • Why is Assembly.GetCustomAttributes suddenly throwing TypeLoadException on build machine with Silver

    - by andrej351
    A short while back i had to display the current version of our Silverlight app. After some googling the following code gave me the desired result: var fileVersionAttributes = typeof(MyClass).Assembly. GetCustomAttributes(typeof(AssemblyFileVersionAttribute), false) as AssemblyFileVersionAttribute[]; var version = fileVersionAttributes[0].Version; This worked a treat in our .NET 3.5 Silverlight 3 environment. However, we recently upgraded to .NET 4 and Silverlight 4. We just finished getting our build machine working and found that the unit test for this code was throwing the following exception: Exception Message: System.TypeLoadException: Error 0x80131522. Debugging resource strings are unavailable. See http://go.microsoft.com/fwlink/?linkid=106663&Version=3.0.50106.0&File=mscorrc.dll&Key=0x80131522 at System.ModuleHandle.ResolveType(ModuleHandle module, Int32 typeToken, RuntimeTypeHandle* typeInstArgs, Int32 typeInstCount, RuntimeTypeHandle* methodInstArgs, Int32 methodInstCount) at System.ModuleHandle.ResolveTypeHandle(Int32 typeToken, RuntimeTypeHandle[] typeInstantiationContext, RuntimeTypeHandle[] methodInstantiationContext) at System.Reflection.Module.ResolveType(Int32 metadataToken, Type[] genericTypeArguments, Type[] genericMethodArguments) at System.Reflection.CustomAttribute.FilterCustomAttributeRecord(CustomAttributeRecord caRecord, MetadataImport scope, Assembly& lastAptcaOkAssembly, Module decoratedModule, MetadataToken decoratedToken, RuntimeType attributeFilterType, Boolean mustBeInheritable, Object[] attributes, IList derivedAttributes, RuntimeType& attributeType, RuntimeMethodHandle& ctor, Boolean& ctorHasParameters, Boolean& isVarArg) at System.Reflection.CustomAttribute.GetCustomAttributes(Module decoratedModule, Int32 decoratedMetadataToken, Int32 pcaCount, RuntimeType attributeFilterType, Boolean mustBeInheritable, IList derivedAttributes, Boolean isDecoratedTargetSecurityTransparent) at System.Reflection.CustomAttribute.GetCustomAttributes(Module decoratedModule, Int32 decoratedMetadataToken, Int32 pcaCount, RuntimeType attributeFilterType, Boolean isDecoratedTargetSecurityTransparent) at System.Reflection.CustomAttribute.GetCustomAttributes(Assembly assembly, Type caType) at System.Reflection.Assembly.GetCustomAttributes(Type attributeType, Boolean inherit) at MyCode.VersionTest() I have never seen this exception before and the link in it points nowhere. It is only throwing on the build machine and not on my development box, so i'm going through a process of trial and error to see any differences between the two. Any idea why this might be happening?? Cheers, Andrej.

    Read the article

  • How to have Android Service communicate with Activity

    - by Scott Saunders
    I'm writing my first Android application and trying to get my head around communication between services and activities. I have a Service that will run in the background and do some gps and time based logging. I will have an Activity that will be used to start and stop the Service. So first, I need to be able to figure out if the Service is running when the Activity is started. There are some other questions here about that, so I think I can figure that out (but feel free to offer advice). My real problem: if the Activity is running and the Service is started, I need a way for the Service to send messages to the Activity. Simple Strings and integers at this point - status messages mostly. The messages will not happen regularly, so I don't think polling the service is a good way to go if there is another way. I only want this communication when the Activity has been started by the user - I don't want to start the Activity from the Service. In other words, if you start the Activity and the Service is running, you will see some status messages in the Activity UI when something interesting happens. If you don't start the Activity, you will not see these messages (they're not that interesting). It seems like I should be able to determine if the Service is running, and if so, add the Activity as a listener. Then remove the Activity as a listener when the Activity pauses or stops. Is that actually possible? The only way I can figure out to do it is to have the Activity implement Parcelable and build an AIDL file so I can pass it through the Service's remote interface. That seems like overkill though, and I have no idea how the Activity should implement writeToParcel() / readFromParcel(). Is there an easier or better way? Thanks for any help.

    Read the article

  • Winform User Settings - Allow multiple choice values at Runtime

    - by Refracted Paladin
    I created a simple User Settings Dialog by binding the Property.Settings to a PropertyGrid. This works like a charm but now I would like to allow only certain choices for some values. I have noticed that some Types will give a dropdown of possible choices. This is what I am shooting for but for, say, Strings. Example, one of the Settings is UserTheme which is a String. Black, Blue, Silver. The program reads that string from the Settings File and sets the Theme on Startup. I can type in a correct theme and it works but if I type in Pink it will not as there is not a pink option. This is my VERY simple UserSettingsForm code. #region FIELDS internal Settings userSettings; #endregion #region EVENTS private void frmEditUserControl_Load(object sender, EventArgs e) { userSettings = Settings.Default; this.propertyGrid1.SelectedObject = userSettings; this.propertyGrid1.PropertySort = PropertySort.Alphabetical; } private void btnSave_Click(object sender, EventArgs e) { userSettings.Save(); //this.DialogResult = DialogResult.OK; this.Close(); } private void btnCancel_Click(object sender, EventArgs e) { userSettings.Reload(); this.Close(); } #endregion

    Read the article

  • An alternative to reading input from Java's System.in

    - by dvanaria
    I’m working on the UVa Online Judge problem set archive as a way to practice Java, and as a way to practice data structures and algorithms in general. They give an example input file to submit to the online judge to use as a starting point (it’s the solution to problem 100). Input from the standard input stream (java.lang.System.in) is required as part of any solution on this site, but I can’t understand the implementation of reading from System.in they give in their example solution. It’s true that the input file could consist of any variation of integers, strings, etc, but every solution program requires reading basic lines of text input from System.in, one line at a time. There has to be a better (simpler and more robust) method of gathering data from the standard input stream in Java than this: public static String readLn(int maxLg) { byte lin[] = new byte[maxLg]; int lg = 0, car = -1; String line = “”; try { while (lg < maxLg) { car = System.in.read(); if ((car < 0) || (car == ‘\n’)) { break; } lin[lg++] += car; } } catch (java.io.IOException e) { return (null); } if ((car < 0) && (lg == 0)) { return (null); // eof } return (new String(lin, 0, lg)); } I’m really surprised by this. It looks like something pulled directly from K&R’s “C Programming Language” (a great book regardless), minus the access level modifer and exception handling, etc. Even though I understand the implementation, it just seems like it was written by a C programmer and bypasses most of Java’s object oriented nature. Isn’t there a better way to do this, using the StringTokenizer class or maybe using the split method of String or the java.util.regex package instead?

    Read the article

  • C# FileStream position is off after calling ReadLine()

    - by Cristi Diaconescu
    I'm trying to read a (small-ish) file in chunks of a few lines at a time, and I need to return to the beginning of particular chunks. The problem is, after the very first call to streamReader.ReadLine(); the streamReader.BaseStream.Position property is set to the end of the file! Now I assume some caching is done in the backstage, but I was expecting this property to reflect the number of bytes that I used from that file. For instance, calling ReadLine() again will (naturally) return the next line in the file, which does not start at the position previously reported by streamReader.BaseStream.Position. My question is, how can I find the actual position where the 1st line ends, so I can return there later? I can only think of manually doing the bookkeeping, by adding the lengths of the strings returned by ReadLine(), but even here there are a couple of caveats: ReadLine() strips the new-line character(s) which may have a variable length (is is '\n' ? is it "\r\n" ? etc) I'm not sure if this would work ok with variable-length characters ...so right now it seems like my only option is to rethink how I parse the file, so I don't have to rewind. If it helps, I open my file like this: using (var reader = new StreamReader( new FileStream(m_path, FileMode.Open, FileAccess.Read, FileShare.ReadWrite))) {...} Any suggestions?

    Read the article

  • Problem with XML encoding of database contents with Latin characters

    - by user89691
    I have an ASP Access database that contains strings in various European languages. The database was populated prior by agents in the respective countries. It contains entries with accented etc characters as you would expect. If I open the database with MS Access these characters show up fine. For example the the German equivalent of "Open" shows as "Öffnen" (hopefully you can see an "O" with 2 dots above it!). I have ASP code that reads the database and returns records in XML. The text is passed to XMLEncode to construct the XML, but that only seems to deal with the 5 specials like "<", "&", etc. If I dump the XML the accented characters are unchanged. <English>Open</English> <German>Öffnen</German> If I look at the raw packets with Wireshark I see that the "Ö" byte is hex D6, which appears to be it's decimal Unicode and ISO 8859-1 value. The problem starts when I try to parse the XML in client-side JS. I get: "An invalid character was found in text content" from IE. FF and Chrome happily accept the XML without hiccup but the browser shows the "Ö" character as a diamond with a question mark inside. http://www.validome.org/xml/validate/ reports "encoding error." http://www.w3schools.com/dom/dom_validate.asp thinks it is fine. The XML is UTF-8 encoded. What do I need to do to have IE accept my XML without complaint? What do I need to do to have browsers display the stuff correctly?

    Read the article

  • Jackson object mapping - map incoming JSON field to protected property in base class

    - by Pete
    We use Jersey/Jackson for our REST application. Incoming JSON strings get mapped to the @Entity objects in the backend by Jackson to be persisted. The problem arises from the base class that we use for all entities. It has a protected id property, which we want to exchange via REST as well so that when we send an object that has dependencies, hibernate will automatically fetch these dependencies by their ids. Howevery, Jackson does not access the setter, even if we override it in the subclass to be public. We also tried using @JsonSetter but to no avail. Probably Jackson just looks at the base class and sees ID is not accessible so it skips setting it... @MappedSuperclass public abstract class AbstractPersistable<PK extends Serializable> implements Persistable<PK> { @Id @GeneratedValue(strategy = GenerationType.AUTO) private PK id; public PK getId() { return id; } protected void setId(final PK id) { this.id = id; } Subclasses: public class A extends AbstractPersistable<Long> { private String name; } public class B extends AbstractPersistable<Long> { private A a; private int value; // getter, setter // make base class setter accessible @Override @JsonSetter("id") public void setId(Long id) { super.setId(id); } } Now if there are some As in our database and we want to create a new B via the REST resource: @POST @Consumes(MediaType.APPLICATION_JSON) @Produces(MediaType.APPLICATION_JSON) @Transactional public Response create(B b) { if (b.getA().getId() == null) cry(); } with a JSON String like this {"a":{"id":"1","name":"foo"},"value":"123"}. The incoming B will have the A reference but without an ID. Is there any way to tell Jackson to either ignore the base class setter or tell it to use the subclass setter instead? I've just found out about @JsonTypeInfo but I'm not sure this is what I need or how to use it. Thanks for any help!

    Read the article

  • FasterCSV Parsing issue?

    - by Schroedinger
    G'day guys, I'm currently using fastercsv to construct ActiveRecord elements and I can't for the life of me see this bug (tired), but for some reason when it creates, if in the rake file i output the column I want to save as the element value, it puts out correctly, as either a Trade or a Quote but when I try to save it into the activerecord, it won't work. FasterCSV.foreach("input.csv", :headers => true) do |row| d = DateTime.parse(row[1]+" "+row[2]) offset = Rational(row[3].to_i,24) o = d.new_offset(offset) t = Trade.create( :name => row[0], :type => row[4], :time => o, :price => row[6].to_f, :volume => row[7].to_i, :bidprice => row[10].to_f, :bidsize => row[11].to_i, :askprice => row[14].to_f, :asksize => row[15].to_i ) end Ideas? Name and Type are both strings, every other value works except for type. Have I missed something really simple?

    Read the article

  • Unit Testing - Validation of ViewModel ASP.NET MVC 2

    - by dean nolan
    I am currently unit testing a service that adds users to a repository. I am using dependency injection to test using a fake repository. The repository has a method CreateUser(User user) which just adds it to the database or in this case a List of Users. The logic for the creation is in the UserServices class. The application has a form for creating a user that requires some properties such as name and address. This is an MVC 2 app and I will be using the new validation using data annotations. This makes me wonder about a few things: 1) Should I annotate a POCO object that will map to the database? Or should I create a specific View Model that has these annotations and pass this data to the UserServices class? 2)Should the UserServicesClass also check this data? Would I best be constructing a Usr out of the ViewModel and passing this into the Service as a parameter? 3) The actual unit testing would depend on 2), I either populate a User object and pass that in, or I pass a large list of strings to the method CreateUser. Writing this out I get a basic idea that I should probably annotate the view model only, pass in a user (constructed by the view model if the data is valid) and also just construct the user in the unit test also. Is this the best way to go?

    Read the article

  • Using YQL multi-query & XPath to parse HTML, how to escape nested quotes?

    - by Tivac
    The title is more complicated than it has to be, here's the problem query. SELECT * FROM query.multi WHERE queries=" SELECT * FROM html WHERE url='http://www.stumbleupon.com/url/http://www.guildwars2.com' AND xpath='//li[@class=\"listLi\"]/div[@class=\"views\"]/a/span'; SELECT * FROM xml WHERE url='http://services.digg.com/1.0/endpoint?method=story.getAll&link=http://www.guildwars2.com'; SELECT * FROM json WHERE url='http://api.tweetmeme.com/url_info.json?url=http://www.guildwars2.com'; SELECT * FROM xml WHERE url='http://api.facebook.com/restserver.php?method=links.getStats&urls=http://www.guildwars2.com'; SELECT * FROM json WHERE url='http://www.reddit.com/button_info.json?url=http://www.guildwars2.com'" Specifically this line, xpath='//li[@class=\"listLi\"]/div[@class=\"views\"]/a/span' It's problematic because of the quoting, I have to nest them three levels deep and I've run out of quote characters to use. I've tried the following variations without success: //no attribute quoting xpath='//li[@class=listLi]/div[@class=views]/a/span' //try to quote attribute w/ backslash & single quote xpath='//li[@class=\'listLi\']/div[@class=\'views\']/a/span' //try to quote attribute w/ backslash & double quote xpath='//li[@class=\"listLi\"]/div[@class=\"views\"]/a/span' //try to quote attribute with double single quotes, like SQL xpath='//li[@class=''listLi'']/div[@class=''views'']/a/span' //try to quote attribute with double double quotes, like SQL xpath='//li[@class=""listLi""]/div[@class=""views""]/a/span' //try to quote attribute with quote entities xpath='//li[@class=&quot;listLi&quot;]/div[@class=&quot;views&quot;]/a/span' //try to surround XPath with backslash & double quote xpath=\"//li[@class='listLi']/div[@class='views']/a/span\" //try to surround XPath with double double quote xpath=""//li[@class='listLi']/div[@class='views']/a/span"" All without success. I don't see much out there about escaping XPath strings but everything I've found seems to be variations on using concat (which won't help because neither ' nor " are available) or html entities. Not using quotes for the attributes doesn't throw an error but fails because it's not the actual XPath string I need. I don't see anything in the YQL docs about how to handle escaping. I'm aware of how edge-casey this is but was hoping they'd have some sort of escaping guide.

    Read the article

  • python - tkinter - update label from variable

    - by Tom
    I wrote a python script that does some stuff to generate and then keep changing some text stored as a string variable. This works, and I can print the string each time it gets changed. Problems have arisen while trying to display that output in a GUI (just as a basic label) using tkinter. I can get the label to display the string for the first time... but it never updates. This is really the first time I have tried to use tkinter, so it's likely I'm making a foolish error. What I've got looks logical to me, but I'm evidently going wrong somewhere! from tkinter import * outputText = 'Ready' counter = int(0) root = Tk() root.maxsize(400, 400) var = StringVar() l = Label(root, textvariable=var, anchor=NW, justify=LEFT, wraplength=398) l.pack() var.set(outputText) while True: counter = counter + 1 #do some stuff that generates string as variable 'result' outputText = result #do some more stuff that generates new string as variable 'result' outputText = result #do some more stuff that generates new string as variable 'result' outputText = result if counter == 5: break root.mainloop() I also tried: from tkinter import * outputText = 'Ready' counter = int(0) root = Tk() root.maxsize(400, 400) var = StringVar() l = Label(root, textvariable=var, anchor=NW, justify=LEFT, wraplength=398) l.pack() var.set(outputText) while True: counter = counter + 1 #do some stuff that generates string as variable 'result' outputText = result var.set(outputText) #do some more stuff that generates new string as variable 'result' outputText = result var.set(outputText) #do some more stuff that generates new string as variable 'result' outputText = result var.set(outputText) if counter == 5: break root.mainloop() In both cases, the label will show 'Ready' but won't update to change that to the strings as they're generated later. After a fair bit of googling and looking through answers on this site, I thought the solution might be to use update_idletasks - I tried putting that in after each time the variable was changed, but it didn't help. It also seems possible I am meant to be using trace and callback somehow to make all this work...but I can't get my head around how that works (I tried, but didn't manage to make anything that even looked like it would do something, let alone actually worked). I'm still very new to both python and especially tkinter, so, any help much appreciated but please spell it out for me if you can :)

    Read the article

  • javascript - catch SyntaxError and run alternate function

    - by ludicco
    Hello there, I'm trying to build something on javascript that I can have an input that can be everything like string, xml, javascript and (non-javascript string without quotes) as follows: //strings eval("'hello I am a string'"); /* note the following proper quote marks */ //xml eval(<p>Hello I am a XML doc</p>); //javascript eval("var hello = 2+2;"); So this first 3 are working well since they are simple javascript native formats but when I try use this inside javascript //plain-text without quotes eval("hello I am a plain text without quotes"); //--SyntaxError: missing ; before statement:--// Obviously javascript interprets this as syntax error because it thinks its javascript throwing a SyntaxError. So what I would like to do it to catch this error and perform the adjustment method if this occurs. I've already tried with try catch but it doesn't work since it keeps returning the Syntax error as soon as it tries to execute the code. Any help would be much appreciated Cheers :) Additional Information: Imagine an external file that javascript would read, using spidermonkey, so it's a non-browser stuff(I can't use HttpRequest, DOM, etc...)..not sure if this matters, but there it is. :)

    Read the article

  • Regex pattern failing

    - by Scott Chamberlain
    I am trying a substring to find from the beginning of the string to the point that has the escape sequence "\r\n\r\n" my regex is Regex completeCall = new Regex(@"^.+?\r\n\r\n", RegexOptions.Compiled); it works great as long as you only have strings like 123\r\n\r\n however once you have the pattern 123\r\n 456\r\n\r\n the pattern no longer matches. Any advice on what I am doing wrong? Regex completeCall = new Regex(@"^.+?\r\n\r\n", RegexOptions.Compiled); Regex junkLine = new Regex(@"^\D", RegexOptions.Compiled); private void ClientThread() { StringBuilder stringBuffer = new StringBuilder(); (...) while(true) { (...) Match match = completeCall.Match(stringBuffer.ToString()); while (Match.Success) //once stringBuffer has somthing like "123\r\n 456\r\n\r\n" Match.Success always returns false. { if (junkLine.IsMatch(match.Value)) { (...) } else { (...) } stringBuffer.Remove(0, match.Length); // remove the processed string match = completeCall.Match(stringBuffer.ToString()); // check to see if more than 1 call happened while the thread was sleeping. } Thread.Sleep(1000); }

    Read the article

  • C++ stringstream, string, and char* conversion confusion

    - by Graphics Noob
    My question can be boiled down to, where does the string returned from stringstream.str().c_str() live in memory, and why can't it be assigned to a const char*? This code example will explain it better than I can #include <string> #include <sstream> #include <iostream> using namespace std; int main() { stringstream ss("this is a string\n"); string str(ss.str()); const char* cstr1 = str.c_str(); const char* cstr2 = ss.str().c_str(); cout << cstr1 // Prints correctly << cstr2; // ERROR, prints out garbage system("PAUSE"); return 0; } The assumption that stringstream.str().c_str() could be assigned to a const char* led to a bug that took me a while to track down. For bonus points, can anyone explain why replacing the cout statement with cout << cstr // Prints correctly << ss.str().c_str() // Prints correctly << cstr2; // Prints correctly (???) prints the strings correctly? I'm compiling in Visual Studio 2008.

    Read the article

  • Loops on a Matlab program

    - by lebland-matlab
    I have 3 sets of 10 vectors each, and I want to take 2 vectors from the first set , 2 vectors from the second set and 3 vectors from the third set . My goal is to make a loop to implement the following program, knowing that after each calculation, the result shall be saved in a new file. My problem is that I can not handle the indices included in the strings. I try to use multiple loops to scan the 3 sets in the order of indices. loops should contain the following program clc; clear all; load('C:\Users\Documents\MATLAB\myFile\matrice_F.mat'); load('C:\Users\Documents\MATLAB\myFile\matrice_G.mat'); F = m_F; G = m_G; load('C:\Users\Documents\MATLAB\myFile\matrice_J.mat'); load('C:\Users\Documents\MATLAB\myFile\matrice_K.mat'); J = m_J; K = m_K; load('C:\Users\Documents\MATLAB\myFile\matrice_N.mat'); load('C:\Users\Documents\MATLAB\myFile\matrice_O.mat'); load('C:\Users\Documents\MATLAB\myFile\matrice_P.mat'); N = m_N ; O = m_O; P = m_P; [A,B,C,D,E] = myFun(F,G,J,K,N,O,P); file_name = 'matrice_final.mat'; save(file_name,'A','B','C','D','E');

    Read the article

  • Parsing Lisp S-Expressions with known schema in C#

    - by Drew Noakes
    I'm working with a service that provides data as a Lisp-like S-Expression string. This data is arriving thick and fast, and I want to churn through it as quickly as possible, ideally directly on the byte stream (it's only single-byte characters) without any backtracking. These strings can be quite lengthy and I don't want the GC churn of allocating a string for the whole message. My current implementation uses CoCo/R with a grammar, but it has a few problems. Due to the backtracking, it assigns the whole stream to a string. It's also a bit fiddly for users of my code to change if they have to. I'd rather have a pure C# solution. CoCo/R also does not allow for the reuse of parser/scanner objects, so I have to recreate them for each message. Conceptually the data stream can be thought of as a sequence of S-Expressions: (item 1 apple)(item 2 banana)(item 3 chainsaw) Parsing this sequence would create three objects. The type of each object can be determined by the first value in the list, in the above case "item". The schema/grammar of the incoming stream is well known. Before I start coding I'd like to know if there are libraries out there that do this already. I'm sure I'm not the first person to have this problem.

    Read the article

  • How to find string in a string

    - by owca
    I somehow need to find the longest string in other string, so if string1 will be "Alibaba" and string2 will be "ba" , the longest string will be "baba". I have the lengths of strings, but what next ? char* fun(char* a, char& b) { int length1=0; int length2=0; int longer; int shorter; char end='\0'; while(a[i] != tmp) { i++; length1++; } int i=0; while(b[i] != tmp) { i++; length++; } if(dlug1 > dlug2){ longer = length1; shorter = length2; } else{ longer = length2; shorter = length1; } //logics here } int main() { char name1[] = "Alibaba"; char name2[] = "ba"; char &oname = *name2; cout << fun(name1, oname) << endl; system("PAUSE"); return 0; }

    Read the article

  • Parsing string, with Boost Spirit 2, to fill data in user defined struct

    - by Surya
    I'm using Boost.Spirit which was distributed with Boost-1.42.0 with VS2005. My problem is like this. I've this string which was delimted with commas. The first 3 fields of it are strings and rest are numbers. like this. String1,String2,String3,12.0,12.1,13.0,13.1,12.4 My rule is like this qi::rule<string::iterator, qi::skip_type> stringrule = *(char_ - ',') qi::rule<string::iterator, qi::skip_type> myrule= repeat(3)[*(char_ - ',') >> ','] >> (double_ % ',') ; I'm trying to store the data in a structure like this. struct MyStruct { vector<string> stringVector ; vector<double> doubleVector ; } ; MyStruct var ; I've wrapped it in BOOST_FUSION_ADAPT_STRUCTURE to use it with spirit. BOOST_FUSION_ADAPT_STRUCT (MyStruct, (vector<string>, stringVector) (vector<double>, doubleVector)) My parse function parses the line and returns true and after qi::phrase_parse (iterBegin, iterEnd, myrule, boost::spirit::ascii::space, var) ; I'm expecting var.stringVector and var.doubleVector are properly filled. but it is not the case. What is going wrong ? Thanks in advance, Surya

    Read the article

  • How to marshall non-string objects with JAXB and Spring

    - by lesula
    I was trying to follow this tutorial in order to create my own restful web-service using Spring framework. The client do a GET request to, let's say http://api.myapp/app/students and the server returns an xml version of the object classroom: @XmlRootElement(name = "class") public class Classroom { private String classId = null; private ArrayList<Student> students = null; public Classroom() { } public String getClassId() { return classId; } public void setClassId(String classId) { this.classId = classId; } @XmlElement(name="student") public ArrayList<Student> getStudents() { return students; } public void setStudents(ArrayList<Student> students) { this.students = students; } } The object Student is another bean containing only Strings. In my app-servlet.xml i copied this lines: <bean id="studentsView" class="org.springframework.web.servlet.view.xml.MarshallingView"> <constructor-arg ref="jaxbMarshaller" /> </bean> <!-- JAXB2 marshaller. Automagically turns beans into xml --> <bean id="jaxbMarshaller" class="org.springframework.oxm.jaxb.Jaxb2Marshaller"> <property name="classesToBeBound"> <list> <value>com.spring.datasource.Classroom</value> <value>com.spring.datasource.Student</value> </list> </property> </bean> Now my question is: what if i wanted to insert some non-string objects as class variables? Let's say i want a tag containing the String version of an InetAddress, such as <inetAddress>192.168.1.1</inetAddress> How can i force JAXB to call the method inetAddress.toString() in such a way that it appears as a String in the xml? In the returned xml non-string objects are ignored!

    Read the article

  • How can I modify/merge Jinja2 dictionaries?

    - by Brian M. Hunt
    I have a Jinja2 dictionary and I want a single expression that modifies it - either by changing its content, or merging with another dictionary. >>> import jinja2 >>> e = jinja2.Environment() Modify a dict: Fails. >>> e.from_string("{{ x[4]=5 }}").render({'x':{1:2,2:3}}) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "jinja2/environment.py", line 743, in from_string return cls.from_code(self, self.compile(source), globals, None) File "jinja2/environment.py", line 469, in compile self.handle_exception(exc_info, source_hint=source) File "<unknown>", line 1, in template jinja2.exceptions.TemplateSyntaxError: expected token 'end of print statement', got '=' Two-stage update: Prints superfluous "None". >>> e.from_string("{{ x.update({4:5}) }} {{ x }}").render({'x':{1:2,2:3}}) u'None {1: 2, 2: 3, 4: 5}' >>> e.from_string("{{ dict(x.items()+ {3:4}.items()) }}").render({'x':{1:2,2:3}}) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "jinja2/environment.py", line 868, in render return self.environment.handle_exception(exc_info, True) File "<template>", line 1, in top-level template code TypeError: <lambda>() takes exactly 0 arguments (1 given) Use dict(x,**y): Fails. >>> e.from_string("{{ dict((3,4), **x) }}").render({'x':{1:2,2:3}}) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "jinja2/environment.py", line 868, in render return self.environment.handle_exception(exc_info, True) File "<template>", line 1, in top-level template code TypeError: call() keywords must be strings So how does one modify the dictionary x in Jinja2 by changing an attribute or merging with another dictionary? This question is similar to: How can I merge two Python dictionaries as a single expression? -- insofar as Jinja2 and Python are analogous.

    Read the article

  • C# COM objects with VB6/asp error

    - by Ken
    I'm trying to expose a C# class library via COM so that I can use it in a classic asp web site. I've used sn - k, regasm and gacutil. About all I can do now though is echo back strings. Methods which take Class variables as input are not working for me. ie my test method EchoPerson(Person p) which returns a string of the first and last name doesn't work. I get a runtime error 5 - Invalid procedure call or argument. Please let me know what I am missing. Also I have no intellisence in VB. What do I need to do to get the intellisence working. Below is my C# test code namespace MrdcToFastCom { public class Person : MrdcToFastCom.IPerson { public string FirstName { get; set; } public string LastName { get; set; } } public class ComTester : MrdcToFastCom.IComTester { public string EchoString(string s) { return ("Echo: " + s); } public string Hello() { return "Hello"; } public string EchoPerson(ref Person p) { return string.Format("{0} {1}", p.FirstName, p.LastName); } } } and VB6 call Private Sub btnClickMe_Click() Dim ct Set ct = New MrdcToFastCom.ComTester Dim p Set p = New MrdcToFastCom.Person p.FirstName = "Joe" p.LastName = "Test" Dim s s = ct.EchoPerson(p) 'Error on this line tbx1.Text = s End Sub

    Read the article

  • Detecting duplicate values in a column of a Datatable while traversing through It

    - by Ashish Gupta
    I have a Datatable with Id(guid) and Name(string) columns. I traverse through the data table and run a validation criteria on the Name (say, It should contain only letters and numbers) and then adding the corresponding Id to a List If name passes the validation. Something like below:- List<Guid> validIds=new List<Guid>(); foreach(DataRow row in DataTable1.Rows) { if(IsValid(row["Name"]) { validIds.Add((Guid)row["Id"]); } } In addition to this validation I should also check If the name is not repeating in the whole datatable (even for the case-sensitiveness), If It is repeating, I should not add the corresponding Id in the List. Things I am thinking/have thought about:- 1) I can have another List, check for the "Name" in the same, If It exists, will add the corresponding Guild 2) I cannot use HashSet as that would treat "Test" and "test" as different strings and not duplicates. 3) Take the DataTable to another one where I have the disctict names (this I havent tried and the code might be incorrect, please correct me whereever possible) DataTable dataTableWithDistinctName = new DataTable(); dataTableWithDistinctName.CaseSensitive=true CopiedDataTable=DataTable1.DefaultView.ToTable(true,"Name"); I would loop through the original datatable and check the existence of the "Name" in the CopiedDataTable, If It exists, I wont add the Id to the List. Are there any better and optimum way to achieve the same? I need to always think of performance. Although there are many related questions in SO, I didnt find a problem similar to this. If you could point me to a question similar to this, It would be helpful. Thanks

    Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >